Produktkatalog - ProMeister Spesialverktøy

Special Tools Catalogue Katalog Für Spezialwerkzeuge | Specialverktygskatalog Spesialverktøyskatalog | Specialværktøjskatalog Erikoistyökalujen Luettelo | Katalog Narzędzi Specjalnych Catalogue D'outils Spéciaux

Ver. 3

INNEHÅLL BROMSSERVICEVERKTYG

4

PT5110

Tryckluftsdrivet bromskolvsverktyg, 17 delar................................................ 5

inn

PT5513

Kylsystempåfyllare, vakuum..................................................................... 41

PT5514

Kylsystemtestare & påfyllare, inkl. adapters, 26 delar................................ 42

VÄTSKE-, BRÄNSLE OCH OLJEHANTERINGSVERKTYG

43

PT5311

PT5111

Sätesbrotch för dieselinjectorer, 9 delar...................................................44

PT5112

Oljepluggsverktyg, magnet.....................................................................45

PT5115

Oljepluggsverktyg för kompositpluggar, 4 delar........................................46

PT5117

Dieselfilterverktyg VAG/Volvo................................................................. 47

PT5119

Oljefilterverktyg off-set, 24-38mm, 5 delar............................................... 48

Bromsluftare, automatisk, 12V................................................................... 6 Bromsfjädertång....................................................................................... 7 Bromsluftare basic, tryckluftsdriven, inkl. påfyllare...................................... 8 Bromsluftarnycklar, 7-11mm, 5 delar........................................................... 9 Adaptersats för bromsluftare, 10 delar..................................................... 10

PT5121

Bromsrörskoningsverktyg, 30 delar.......................................................... 11

PT5313

PT5341

PT5342

PT5349 PT5351

Dropp-stopp-pluggar, 12 delar................................................................ 49

PT5352

PT5124

Oljefilterverktyg, aluminium, 13 delar...................................................... 50

PT5125

Reparationssats för oljesump, 64 delar..................................................... 51

PT5140 / PT5141

Lageravdragare, 30-75mm, 11 delar....................................................... 52

PT5154

Bränsleledningsverktyg, 4 delar............................................................... 53

PT5605

Dieselpumpsavdragare VAG TDI..............................................................54

PT5842

AC & bränsleledningsverktyg, demontering, 6 delar.................................. 55

PT5902

Dieselfilterverktyg Ford Transit TDCi......................................................... 56

Bromsvätskebehållaradapter universal...................................................... 12 Adaptersats för bromsluftare, 6 delar....................................................... 13 Stål/mässingsborste för bromsok............................................................. 14 Bromsskivemätare, diameter.................................................................... 15 Bromswiretång....................................................................................... 16 Bromsoksverktyg, hylsor/bitshylsor, 17 delar............................................. 17

PT5353 PT5357 PT5361

PT5362

PT5364 PT5367

Gradverktyg, int 3-12/ ext 4-14mm.......................................................... 18

PT5368

GÄNGREPARATIONSVERKTYG

PT5376

19

PT5805

Bult & skruvutdragarsats 3/8", 6 delar..................................................... 20

PT5942

Gängverktygssats M3-M12, 40 delar....................................................... 21

PT5943

Gängkloppssats m. spärr, 4 delar............................................................ 22

PT5955

Gängreparationssats M5-M12, 110 delar................................................. 23

PT5964

Gängverktygssats M6-M18, 36 delar....................................................... 23

PT5965

Gängkloppssats med spärr, 7 delar......................................................... 24

PT5968

Gängverktygssats för hjulbultar M12/14, 12 delar.................................... 24

MOTOR- & VÄXELLÅDSVERKTG

25

Oljeflterverktyg Hyundai/KIA.................................................................. 57 Bränslefilterverktyg VAG, montering......................................................... 58

PT5377

Dieselfilterverktyg HDi-motorer................................................................ 59

PT5378

Dieselfilterverktyg Ford Transit TDCi.........................................................60

PT5410

Vätskepåfyllare inkl. adaptersats, 16 delar............................................... 61

PT5412

Filternyckel DSG växellådsfilter, 24mm, kort, VAG..................................... 62

PT5413

Filternyckel DSG växellådsfilter, 24mm, lång, VAG.................................... 62

PT5414

Mercedes 9G-Tronic ATF Service Kit........................................................63

PT5415

Transmissionspåfyllare inkl. adapersats, 21 delar......................................64

PT5416

Adaptersats för transmissionspåfyllare ATF, 5 delar...................................65

PT5312

PT5417

PT5328

PT5515

Centreringsverktyg för kopplingsbyte (ej DSG), 15 delar............................ 26 Generatorverktyg, master kit, 21 delar.....................................................27

Vätskepåfyllare, utan adaptersats (PT5420)..............................................66 Bränsletankstömmare, 40 liter.................................................................. 67

PT5339

PT5516

PT5340

PT5522

PT5346

PT5523

Mothållsverktyg vevaxel Volvo/Ford......................................................... 28 Kopplingsverktyg SAC, 38 delar.............................................................. 29 Connectordemonteringsverktyg, VAG.......................................................30

Bränsletankstömmare, 90 liter.................................................................. 68 Olje/vätskesug, pneumatisk, inkl. sugsonder, 9,5 liter................................ 69 Olje/vätskesug inkl. sugsonder, 5,5 liter................................................... 70

PT5347

PT5528

PT5348

PT5529

PT5354

PT5608

PT5358

PT5613

PT5359

PT5701

PT5360

PT5702

PT5363

PT5703

PT5365

PT5706

Monteringsverktyg för fläkt/kamrem, med magnethållare........................... 31 EGT-sensorverktyg, 6 delar..................................................................... 32 Refractometer med LED-belysning............................................................ 33 Lager & packboxverktyg universal...........................................................34 Insugningsverktyg, VAG.......................................................................... 35 Lambdasondsverktyg med led, 22mm....................................................... 36 Remsträckningsverktyg 15-19mm, sats 10 delar......................................... 37 Remsträckningsverktyg, Volvo.................................................................. 38

PT5366

Centreringsverktyg FIAT C510 Dualogic växellåda.................................... 39

PT5379

Vattenpumpsverktyg VW T5....................................................................40

Spilloljebehållare, pneumatisk, inkl. sugsonder, 100 liter........................... 71 Spilloljebehållare, manuell, 70 liter.......................................................... 72 Bränsleledningstång, demontering, justerbar............................................. 73 Bränsleledningsverktyg........................................................................... 74 Tankarmatursverktyg, Volvo..................................................................... 75 Tankarmatursverktyg, Volvo..................................................................... 76 Tankarmatursverktyg, VAG......................................................................77 Tankarmatursverktyg universal, 21mm...................................................... 78

nehåll TÄND- OCH GLÖDSTIFTSVERKTYG

79

PT5235

Glödstiftsverktyg 1/4", tryckluftsdrivet, sats 9 delar...................................80

PT5240

PT5343

PT5344

Tändspoleavdragare VAG....................................................................... 81

PT5345

Tändspoleavdragare VAG....................................................................... 82

Bussningsverktyg Volvo/Ford, bak..........................................................119 Mothållsverktyg, hjulnav....................................................................... 120

PT5252

Damaskverktyg CV, pneumatiskt............................................................ 121

PT5253

Drivknutsavdragare CVJ........................................................................ 122

FJÄDER- OCH STÖTDÄMPARVERKTYG, FRAM- OCH BAKVAGN 83

PT5260

PT5212

PT5355

Fjäderspännare multilink, för centrummontering........................................84

PT5213

Fjäderspännare Macpherson, 80-195mm.................................................85

PT5216

Styrledsverktyg...................................................................................... 86

PT5217

Styrstagsverktyg universal, 28-35mm....................................................... 87

PT5234

Kulledsverktyg, Volvo.............................................................................. 88

PT5238

Kulledsverktyg universal, hydrauliskt 7 ton................................................ 89

PT5239

Delningsverktyg VAG, nedre stötdämparinfästning....................................90

PT5250

Styrledsverktyg universal......................................................................... 91

PT5259

Glappkontrollverktyg, fram och bakvagn..................................................92

PT5267

Hjulinställningsverktyg............................................................................ 93

PT5272

Delningshylsa fjäderben.......................................................................... 94

PT58205

Stötdämparverktyg universal, 19 delar..................................................... 95

PT58208

Mothållsverktyg hjulnav, 6 delar.............................................................. 96

TEST OCH DIAGNOSVERKTYG

97

PT5370

Cylinderläckagetestare........................................................................... 98

PT5371

Oljetryckstestare, 0-10 bar......................................................................99

PT5372

Kompressions- & cylinderläckagetestare, bensin/diesel, 0-70 bar............. 100

PT5373

Vakuum & tryckpump............................................................................ 101

PT8111

Multifunktionstestare Auto..................................................................... 102

PT8112

Bromsvätsketestare, kokpunkt................................................................. 103

PT8113

Digital testpenna.................................................................................. 104

PT8114

Injektortestare, 12V.............................................................................. 105

PT8115

Multimeter, avancerad.......................................................................... 106

HJUL- OCH DÄCKVERKTYG

107

Hjullagerverktyg Ford Transit, 17 delar................................................... 123 Oljepluggsverktyg, gängrepsats, 64 delar.............................................. 124

PT5356

Kullagerverktyg, demontering, 10 delar................................................. 125

PT5607

Drivknutsklammetång CV ..................................................................... 126

PT5609

Drivknutsklammertång CV, öronlösa klammer.......................................... 127

PT5610

Drivknutsklammertång för momentdragning............................................ 128

ÖVRIGT

Sugkopp för glasdetaljer....................................................................... 130

PT5251

Skrapset komposit, 4 delar.................................................................... 131

PT5315

Packboxserviceverktyg, 6 delar............................................................. 132

PT56008

Tång för demontering av avgasrörsgummi.............................................. 133

PT5601

Glödlampsverktyg................................................................................ 134

PT5604

Relätång.............................................................................................. 135

PT5606

Slangdemonteringstång för vacuumslangar............................................ 136

PT5611

Slangklammertång lång, plåtklämmor.................................................... 137

PT5705

Dörrhandtagsverktyg VAG.................................................................... 138

PT5901

Värmefläktsverktyg, Volvo, demontering & montering.............................. 139

PT5930

Torkararmsverktyg VAG........................................................................ 140

PT5931

Torkararmsverktyg Universal.................................................................. 141

PT5933

Bult/skruv/mutterutdragarsats för skadade bultar och muttrar, 21 delar..... 142

PT5935

Hålstansverktyg för backvarnarsensorer, 8 delar..................................... 143

PT5944

Gummiklubba soft................................................................................ 144

PT5945

Bräckjärn 915mm, böjd......................................................................... 145

PT5946

Bräckjärn 915mm, rak........................................................................... 145

PT5947

Bräckjärn 1524mm, rak........................................................................ 145

PT5120

PT5969

PT5258

PT5970

Hjulnavsslip inkl. slipskiva..................................................................... 108 Monteringsdorn för hjul, 5 delar............................................................ 109

HJULLAGER-, DRIVKNUT OCH BUSSNINGSVERKTYG

110

PT5210

Bussnings- & lagerverktyg Universal........................................................111

PT5218

Hjullagerverktyg, GEN2, 62mm..............................................................112

PT5219

Hjullagerverktyg, GEN2, 66mm.............................................................113

PT5220

Hjullagerverktyg................................................................................... 114

PT5221

Hjullagerverktyg, GEN2, 78mm.............................................................115

PT5228

Hjullagerverktyg, GEN2, 82mm.............................................................116

PT5229

Hjullagerverktyg, GEN2, 85mm.............................................................117

PT5230

Hjullagerverktyg, GEN2, 72, 78 & 82mm...............................................118

129

PT5127

Karroserikilar, 5 delar........................................................................... 146 Karrosserikil XL med handtag................................................................ 147

BROMSSERVICEVERKTYG (BRAKE TOOLS)

PT5110

Tryckluftsdrivet bromskolvsverktyg, 17 delar Instructions 1 Choose a suitable adapter for the brake caliper piston. Fit the adapter onto the magnetic tip (Fig. 1). Connect the tool to shop air, and make sure that the pressure does not exceed 8 bar.

2 Press pressure release button and rotate the lever to move the push spindle forward or backward and fit the tool into the caliper.

3 Press operating button and rotate lever to wind the brake caliper piston (Fig. 2).

4 After winding the piston, press pressure release button and pull lever to move the push spindle backward, releasing the tool from the caliper (Fig. 3).

Fig. 2

Fig. 3

Lever Pressure release button Operating button Push spindle Magnetic tip

www.promeister.com

Fig. 1

5

PT5111

Bromsluftare, automatisk, 12V Specifications Powered by the vehicle’s 12V battery.

Designed for bleeding of the vehicle’s brake or clutch system. Bleed pressure is closely controlled up to 2.5bar – suitable for most vehicles. Compatible with ABS system, DOT3, DOT4 and DOT5.1. Auto-shut-off device to prevent the system running dry.

• • • • •

Power Supply: 12V Fluid Pump: Diaphragm Pump Maximum Pressure: 2.5 bar Tank Capacity: 5 ltr Main Body: Stainless Steel

www.promeister.com

Accessories

6

Supply Hose

Bleed Bottle

Power Cable w/ Clamps

Syringe

Master Cylinder Cap

Hook

PT5112

Bromsfjädertång

WARNING!

Always wear gloves while using this tool.

Features • Applicable for most drum brakes.

• Special neck angle provides easy removal and installation of brake spring washer.

Specifications Length: 180.5mm Material: Steel Heat Treatment: HRC43-46 Max Angle: 50°

Hold the handle, clip the groove on the front ditch and rotate the tool.

Remove/Install the spring washer smoothly.

www.promeister.com

• • • •

7

PT5115

Bromsluftare basic, tryckluftsdriven, inkl. påfyllare Features • Lightweight with less than 1kg for easy carry & operation • Pneumatic extractor nonspark • 1m silicon hose with universal rubber adapter which can fit most vehicle brake oil bleeder fitting • Fixing valve & safety cup for automatic cut-off extracting

Specifications

www.promeister.com

Air Inlet Average Air Cons Working Pressure Temperature Range Max. Capacity

8

Index No. 1 2 2-1 3 4 5 6 7 8 9 10 10-1 11 12 13 14 15 15-1 16 17 18 19 20 20-1 21 22 22-1 23 24 25 25-1 26 27 28 29 30 31 32 33 34

1/4” 2 CFM 40-170 PSI -3°F~140°F 2,000cc

Description Cover Housing Inlet Nut O Ring Air Inlet Coupler Fixing Ring Trigger Fluid Inlet Coupler Pin O Ring Vacuum Valve Vacuum Body O Ring Noise-Reduction Cover Noise-Reduction Net O Ring Lock Nut Safety Valve C Locker Safety Cup O Ring Tank Steel Ball Locking Screw O Ring Spring Valve O Ring Spring Lock Nut Oil Outlet Housing O Ring O Ring Oil Outlet Cover O Ring Safety Valve O Ring Coupler Silicon Hose Adapter Brake Coupler

The type and specifications may be changed with or without notice.

PT5117

Bromsluftarnycklar, 7-11mm, 5 delar

Specifications • Brake bleeder wrench size: 7/8/9/10/11mm.

• Special socket wrench for loosening and tightening bleed nipples.

• Ideal for bleeding brake system and hydraulic clutch system without removing the wheels.

• 1.2m silicon hose with check valve for safety operating.

• For universal bleed nipples.

www.promeister.com

• High quality material internal seal for long life.

9

PT5119

Adaptersats för bromsluftare, 10 delar Specifications

0813

12

9

19

10

Tube 03 01

Clamp

Thumbscrew

21 02

06

Washer Hook

www.promeister.com 10

Converter

0712

Can work with brake bleeder (ProMeister Art. Nr: PT5111)

Chain

Item

Application

Inter Diameter (mm)

Type

01

Chrysler, Jeep

43.5

Bayonet

02

Chrysler, Jeep (Blanking Cap)

43.5

Bayonet

03

GM, Chevrolet, Hummer, Mazda

49.5

Bayonet

06

Most European Manufacturers

42

Thread

0712

Universal

N/A

Rubber cone 30-55mm

0813

Universal

N/A

Rubber Cone

09

Honda

56

Bayonet

10

Nissan

34.5

Bayonet

12

Honda

74

Bayonet

19

Chrysler, Hyundai, Mitsubishi, Nissan Lexus

50.7

Bayonet

21 (90° elbow)

Toyota, Lexus

46.5

Bayonet

Tube

(works with cap# 21)

Converter

Female quick connector + Female thread PT 1/4” (If not using PT5111 for brake bleeding)

Hook, Chain, Clamp, Thumbscrew, Washer

(works with cap# 0712 or cap# 0813)

PT5121

Bromsrörskoningsverktyg, 30 delar Features • Set for flaring GM fuel lines, brake lines, manual transmission lines and A/C lines • Hydraulic flaring tool helps save energy and increase precision • Includes several adapters and dies for:

Metric Bubble Flare

45° Double Flare

GM Fuel Line

Push Connect

Specifications Magnet Tip

Fixing Nut

Handle

Adapter Housing

Hydraulic Tube

A Metric Bubble Flaring

45° Double Flaring

Push Connect Line Forming Push Connect Forming

Pressure Release Button

B A. Flaring Die Pair B. Flaring Adapters 4mm (5/32”) 6mm 8mm 10mm 3/16” (4.75mm) 1/4” 5/16” 3/8” 1/2” 5/16” 3/8” 1/4” 5/16” 3/8”

C C. 45° Flaring Adapter

www.promeister.com

Fixing Bar

11

PT5124

Bromsvätskebehållaradapter universal Features • Brake refilling adapter with a 90° rotating coupling fits almost all vehicles on the market.

• Fits master cylinder fill neck between ø28-70mm (1.10”2.75”).

• Maximum pressure up to 3.5 bar (50psi).

www.promeister.com

Specifications

12

PT5125

Adaptersats för bromsluftare, 6 delar Features • Designed for applications on master cylinder reservoirs from 2001 to 2020.

• Covers at least 90% of all the common vehicles on the market.

• Adapters with a standard European air plug type, suitable for pressure bleeding tools or machines.

• Most adapters have a swivel 90° fitting to tackle limited space problems.

Specifications

1 Toyota Lexus (all models) 2 Chevrolet, GMC, Ford, Hyundai, Kia, Mazda, Mitsubishi 3 Honda, Acura (all models) 4 European standard, Ford, and Nissan 5 Mazda, Suzuki

www.promeister.com

6 Nissan (Cube, Juke, Leaf, Micra, Maxima, Tiida, Versa))

13

PT5140 / PT5141

Stål/mässingsborste för bromsok Features PT5140 - Steel Brake Caliper Brush • For removal of brake dust and dirt from the brake caliper.

• Slim design.

• Plastic handle with suspension hole.

Features

www.promeister.com

PT5141 - Brass Brake Caliper Brush • For removal of brake dust and dirt from the brake caliper.

• Soft brass bristles facilitate damage-free cleaning.

• Slim design.

• Plastic handle with suspension hole.

14

Soft brass bristles facilitate damage-free cleaning.

For removal of brake dust and dirt from the brake caliper.

PT5154

Bromsskivemätare, diameter Features The Caliper (outer diameter gauge) for brake discs is universally suitable and designed to measure the diameter of brake discs without the need for removing the wheels from the vehicle. Advantages: • Allows for quick identification of the brake system.

• Helps to eliminate the risk of ordering wrong brake pads or brake discs.

• Reduces number of returns.

• Allows professional and cost-effective brake-servicing work to be carried out.

• Saves a lot of time.

Specifications

www.promeister.com

• Material: Steel • Size: 200-400mm

15

PT5605

Bromswiretång Features

www.promeister.com

• Disassembly and assembly of the hand brake cable on the brake shoes of drum brakes.

• The pliers compress the return springs as far as the cable may be easily removed.

16

PT5842

Bromsoksverktyg, hylsor/bitshylsor, 17 delar Applications Brake Caliper Socket • 10PT - 11.5mm socket use for Porsche • 10PT - 15mm socket use for Audi Q7, S8 Porsche Macan, Cayenne, Cayman • 10PT - 20mm socket use for Audi A8, S6 Porsche Cayenne • 7PT - special socket use for Audi Q7, S4 and other models • 7PT - (AS-22) special socket use for Audi S5

www.promeister.com

Brake Caliper Socket (Pentagon type) • The Pentagon type use for Bendix and Griling system • Car brand: Vauxhall, Smart, Citroën, Peugeot, Renault

17

PT5902

Gradverktyg, int 3-12/ ext 4-14mm Features

www.promeister.com

• Internal / external deburring tool.

• For ensuring brake pipes are effectively deburred before fitting.

• Ideal for brake pipe repair work on / off the vehicle.

• Size range: internal 3-12mm; external 4-14mm.

18

GÄNGREPARATIONSVERKTYG (COIL REPAIR AND TAP & DIE SETS)

PT5805

Bult & skruvutdragarsats 3/8", 6 delar Features • 2mm, 3mm, 4mm, 6mm, 8mm, 10mm • Set for removing worn or rusty inner hex bolt by drilling a hole • Tool with 3/8”Dr to work with a ratchet wrench for additional torque • Product NOT designed for air/impact wrench operation

Specifications Square Drive (D) Size (S) (mm) Length (L) (mm) Material Surface Treatment Hardness

3/8” Dr 2 3 4 6 8 10 60 8660 Steel Zinc Phosphate HRC 49-52

Instructions

www.promeister.com

1. Choose a suitable sized bolt extractor, and drill a hole 0.5mm bigger than the bolt extractor (Fig. 1).

2. Remove the drill.

3. Insert the bolt extractor (Fig. 2).

4. Turn the extractor anti-clockwise to remove the screw/bolt (Fig. 3).

20

PT5942

Gängverktygssats M3-M12, 40 delar Specifications Description

1

M12x1.75 Tap

2

M12x1.5 Tap

3

M11x1.5 Tap

4

M10x1.5 Tap

5

M10x1.25 Tap

6

M9x1.25 Tap

7

M9x1.0 Tap

8

M8x1.25 Tap

9

M7x1.0 Tap

10

M6x1.0 Tap

11

M5x0.9 Tap

12

M5x0.8 Tap

13

M4x0.75 Tap

14

M4x0.7 Tap

15

M3x0.6 Tap

16

M3x0.5 Tap

17

1/8BSP28 Tap

18

M12x1.75 Die

19

M10x1.5 Die

20

M9x1.25 Die

21

M8x1.25 Die

22

M6 1.0 Die

23

M5x0.8 Die

24

M4x0.7 Die

25

M3x0.5 Die

26

M12x1.5 Die

27

M11x1.5 Die

28

M10x1.25 Die

29

M9x1.0 Die

30

M7x1.0 Die

31

M5x0.9 Die

32

M4x0.75 Die

33

M3x0.6 Die

34

1/8BSP28 Die

35

Die Holder

36

M16-M12 Tap Holder

37

M3-M9 Tap Holder

38

Metric Pitch Gauge

39

Screw Driver

40

Rapid Select Ratchet

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15 16

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

17

38 34

35

36

37 39

40

www.promeister.com

Index

21

PT5943

Gängkloppssats m. spärr, 4 delar

Features

www.promeister.com

• Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning • Includes adjustable tap holders and die holder that feature a 3/4" (19mm) hex shape to be driven by included ratcheting tap wrench or standard sockets and wrenches • Die adapters work on round and hex shaped dies

22

Specifications • • • • •

1pc.

1pc.

1pc.

1pc.

1pc.

Die Stock Tap holder (M3-M6) Tap holder (M6-M12) Gear Wrench Blow Case

PT5955

Gängreparationssats M5-M12, 110 delar Specifications • 5 pcs Hand Installation Tool, M5-M6-M8-M10-M12 • 5 pcs Tang Break Tool, M5-M6-M8-M10-M12 • 5 pcs HSS STI Tap, M5-M6-M8-M10-M12 • 5 pcs HSS Fully Ground Drill Bit, 5.2-6.3-8.3-10.4-12.4mm • 20 pcs M5*P0.80*1.5D Stainless Threaded Coil • 20 pcs M6*P1.00*1.5D Stainless Threaded Coil • 20 pcs M8*P1.25*1.5D Stainless Threaded Coil • 20 pcs M10*P1.50*1.5D Stainless Threaded Coil • 10 pcs M12*P1.75*1.5D Stainless Threaded Coil

PT5964

Gängverktygssats M6-M18, 36 delar Specifications • 14 pcs Taps: (Metric) M6x0.75, M6x1.0, M8×1.0, M8x1.25, M10x1.25, M10x1.5, M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M18x1.5, M18x2.5 • 6 pcs 25mm OD Dies: (Metric) M6x0.75, M6x1.0, M8×1.0, M8x1.25, M10x1.25, M10x1.5 • 8pcs 38mm OD Dies: (Metric) M12x1.5, M12x1.75, M14x1.5, M14x2.0, M16x1.5, M16x2.0, M18x1.5, M18x2.5 • 1 pc Gear Wrench (25mm) • 1 pc Adaptor • 2 pcs Tap Holder (M6-M12), (M12-M18) • 2 pcs Die Stock Holder (25mm), (38mm) • 1 pc Screw Pitch Gauge • 1 pc Screw Driver

PT5965

Gängkloppssats med spärr, 7 delar Specifications • • • • • • • •

1 1 1 1 1 1 1 1

pc pc pc pc pc pc pc pc

Die Stock 38mm Die Stock 25mm Tap holder (M3-M6) Tap holder (M6-M12) Tap holder (M12-M18) Gear Wrench Gear Wrench Blow Case

PT5968

Gängverktygssats för hjulbultar M12/14, 12 delar Specifications • 4 pc Die: M12x1.25, M12x1.5, M14x1.25, M14x1.5 • 4 pc Tap: M12x1.25, M12x1.5, M14x1.25, M14x1.5 • 1 pc Tap Holder (M12-M18) • 1 pc Die Socket (ø38, Hex, Round ø36.5) • 1 pc Screw Pitch Gauge • 1 pc 1/2' Dr. '25mm with C-Ring Socket • 1pc Blow Case

MOTOR- & VÄXELLÅDSVERKTG (ENGINE, TRANSMISSION, AND SENSOR TOOLS)

PT5312

Centreringsverktyg för kopplingsbyte (ej DSG), 15 delar Features • Universal application.

• Available for passengers cars and small trucks (below 3.500 cc).

• Available for manual transmission types: - Nearly all vehicles with single disc - Some vehicles with double disc • Not suitable for DSG (double clutch) system

Specifications Medium Spindle with Mandrel

Pilot Bearing Adapters

Medium Spindle with Mandrel

Length: 150mm (M15 x 1.5P)

Length: 200mm (M15 x 1.5P)

15.6mm

20mm

Mandrel: 15-19mm

Small Cone Adapter

Sizes: 10, 12, 14, 15, 16, 17, 19, 25, 27, 30

Mandrel: 20-26mm

Short Spindle

Big Cone Adapter Range: 26-31mm

Range: 19-28mm

www.promeister.com

Range: 21-30mm

26

Extension Adapter

M15 x 1.5P Length: 55mm

Range: 28-35mm

Clutch Cover Adapter

69

Length: 26mm

49

29 50.5

PT5328

Generatorverktyg, master kit, 21 delar Application • CSW-SW19X28 (Toyota, Fiat, Renault, Seat, Citroën, Peugeot) • ZM1064 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • CSW-3PIN-H38 (Toyota) • CSW-SW22x28 (Toyyota) • CSW-H15X1833T (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot)

• SB4HOLD1VC (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • CSW-155W33T (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • CSW-4PIN-H17 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • CSW-HEX22 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • CSW-22SW33T (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • SB3M1090X-31 (Fiat)

• CSW-SW21X28 (Toyota, Fiat, Renault, Seat, Citroën, Peugeot) • 9112-BIT-T40 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • 9112-BIT-M10 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • 9112-BIT-M8 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • 9112-BIT-H10 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • 9112-BIT-H8 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • CSW-SW17 (Toyota, Honda, Seat)

• SB4T50113Z-33T (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • SB4T10113Z-33T (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot) • 9112-BIT-T50 (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot)

www.promeister.com

• SB4M10110Z (Volkswagen, Audi, BMW, Mercedes-Benz, Opel, Ford, Toyota, Honda, Fiat, Renault, Porshe, Seat, Citroën, Peugeot)

27

PT5339

Mothållsverktyg vevaxel Volvo/Ford Features • Designed to counter-hold the vibration damper while loosening/tightening the crankshaft central screw.

• Suitable for Volvo 1.6, 1.8, 1.9, 2.0, 2.3, 2.4, 2.5, 2.8, 2.9 and Ford 2.5, 4- and 5-Cylinder petrol engines; 2.0 and 2.4, 5-cylinder diesel engines.

Volvo: C30, C70, S40, S60, S70, S80, V40, V50, V60, V70, XC60, XC70, XC90 Ford: Focus, Galaxy, Kuga, Mondeo, S-MAX • OEM Ref. 9995433

NEW DESIGN

Volvo Engine Codes - Petrol 1.6

B4164S

1.8

B4184S

1.9

B4194T, B4204S, B4204T

2.0

B5204T3, B5204T4, B5204T5

2.3

B5234FS, B5234T3, B5234T7, B5234T8, B5234T9

2.4

B5244S, B5244S2, B5244S4, B5244S5, B5244S7, B5244SG, B5244SG2, B5244T, B5244T2, B5244T3, B5244T4, B5244T5, B5244T7

2.5

B5254FS, B5254T, B5254T2, B5254T3, B5254T4, B5254T5, B5254T6, B5254T7, B5254T8, B5254T10, B5254T11

2.8

B6284T/T2

2.9

B6294S, B6294S2, B6304S3, B6294T

www.promeister.com

Volvo Engine Codes - Diesel

28

2.0

D5204T, D5204T2, D5204T3, D5204T5

2.4

D5244T, D5244T2, D5244T3, D5244T4, D5244T5, D5244T6, D5244T7, D5244T8, D5244T9, D5244T10, D5244T11, D5244T13, D5244T14, D5244T15, D5244716, D5244T17, D5244T18, D5244T19

Ford Engine Codes HUBA, HUWA, HYDA, HYDB, JZDA, LCBD

1/2” Dr.

PT5340

Kopplingsverktyg SAC, 38 delar Features

Specifications 1 Clamping Tool (a) 3-arms for clutches with 6 locking holes (b) 4-arms for clutches with 8 locking holes 2 Face Spanner 3 Compression Strut 4 Clutch Mandrel Set (BMW) (a) 15mm x 23mm (b) 15mm x 28mm (c) 15mm x 34mm (d) 15mm x 26.5mm (e) 15mm x 32.5mm (f) 15mm x 32.5mm (sleeve) 5 Clutch Resetting Tool 6 Handle for Clamping Tool 7 Clutch Centering Tools (a) Centering handle (b) Handle adapter (c) Clamping cone (15-22mm) (d) Clamping cone (22-28mm) (e) Centering pin 12mm

2

7 7e

7f

7g

7h

7i

7j

7k

7d

7b

6 9b

9c

9a 7a

9

7c

5 1b

8

1a 4f

1

4e 4c

4

4b

3

4a 4d

(f) Centering pin 14mm (g) Centering pin 15mm (h) Centering pin 16mm (i) Centering pin 17mm (j) Centering pin 18mm (k) Centering pin 19mm 8 Knurled Nuts for Threaded Bolts (4 Pcs) 9 Three Sets of 4 Threaded Bolts (a) M6 / 1.0 screw thread (b) M8 / 1.25 screw thread (c) M7 / 1.0 screw thread

www.promeister.com

• This kit allows the professional disassembling and assembling of all self adjusting clutches (SAC) e.g. on VW, Audi, BMW, Ford, Mercedes, Opel, Renault, Volvo, etc.

• During the disassembling and assembling operations, the pre-tightening of the pressure plate is required in order to avoid clutch deformations.

• The 3-arms plate has been designed for SAC clutches with 6 locking holes. The 4-arms plate has been designed for SAC clutches with 8 locking holes.

29

PT5346

Connectordemonteringsverktyg, VAG Features

www.promeister.com

• The safe and proper way to remove most VAG push & pull connectors.

• This style electrical connector is often found on mass air flow (MAF) sensor, coil packs, headlights / fog lights, level sensors, MAP sensors, and etc...

• Suitable for VAG group : VW / Audi / Porsche, and etc...

30

PT5347

Monteringsverktyg för fläkt/kamrem, med magnethållare Features

www.promeister.com

• Holding the belt firmly on the pulley during installation.

• Universal design to fit most pulley types.

• Durable plastic housing with super strong magnet.

31

PT5348

EGT-sensorverktyg, 6 delar Features • This set of sockets is designed to remove most EGT sensors used in cars, light, medium, and heavyduty trucks.

• Designed to drive all 6 sides of the hex equally to reduce the chance of damage.

• The 3 different sizes:13mm, 14mm, and 17mm.

3/8” Dr.

www.promeister.com

Allows precision re-torque

32

tV

on rsi e V

n sio r e

Of f se

Stra igh t

13 mm

Allows additional clearance

14 mm

17 mm

PT5354

Refractometer med LED-belysning

Specifications LED Lighting Plate

Calibration Screw

Main Prism Assembly

Focus Adjustment

Rubber Grip

Eyepiece

1. Operation is done in essentially the same manner as calibration.

Open daylight plate, and place 2-3 drops of the Liquid sample on the main prism. Close the daylight plate so the sample spreads across The entire surface of the prism without air bubbles or dry spots, Allow the sample to rest on the prism for approximately 30 seconds before going to step #2.

(This allows the sample to adjust to the ambient temperature of the refractometer.)

2. Press and hold switch button of LED light source and look into the eyepiece. You will see a circular field with graduations down the center (you may have to rotate eyepiece lens to focus the eyepiece, and to see the graduations clearly). The upper portion of the field should be blue, while the lower portion should be white.

3. Take the reading where the boundary line of blue and white cross the graduated scale. Clean the prism carefully using a damp soft cloth. Do NOT immerse in water, as it is not waterproof.

Read warnings below carefully before use.

www.promeister.com

Basic Operation

33

PT5358

Lager & packboxverktyg universal Features • All in one design, eliminating the need for a driver and several different heads.

• 3-stepped jaws quickly adjust to accommodate bearing races and seals from 18mm ~ 90mm.

• Can be used on most vehicles, including motorcycles.

• Step 1 : 18mm~53mm (0.708”~2.086”) Step 2 : 41mm~76mm (1.614“~2.992”) Step 3 : 54mm~90mm (2.125”~3.543”)

•

Jaw Face

Instructions

1) Loosen the screw, and then turn the dial to expand the jaws.

2) The face of the jaws seat against the race or seal.

•

www.promeister.com

•

34

3) Tighten the screw.

4) Place the race or seal in the mouth of the housing.

5) Tap the driver handle to force the race or seal into place.

6) Done

Helps reduce damage to both race and axle housing.

Screw

Dial

PT5359

Insugningsverktyg, VAG Features

www.promeister.com

• Used for releasing intake manifold pipes.

• Suitable for 1.0 / 1.2 / 1.4 direct injection engine, turbocharger, petrol : VW: Golf 2013~, Jetta 2014~2017 AUDI: A3 2013~, Q3 SEAT: Leon 2013~, Ibiza 2008~, Ateca ŠKODA: Octavia 2013~

35

PT5360

Lambdasondsverktyg med led, 22mm Features • Flexible head design assists in the removal of stubborn oxygen sensors (22mm - 7/8”).

• Pivots to allow more angles of placement.

• For 12-PT and 6-PT application.

www.promeister.com

6PT

36

12PT

PT5363

Remsträckningsverktyg 15-19mm, sats 10 delar Features A comprehensive set of 13 wrench adapters and extension handle with locking system.

Tool is universally suitable, specially designed for use in very confined spaces.

For releasing the bolts used on Tensioner, Timing, and Auxiliary Pulleys.

Single ended adapter: E10,12,14,16,18 Double ended adapters: 12,13,14,15,16,17,18,19mm

For example: • 15, 16, 17, 19mm for VW-Audi, Škoda, SEAT, Ford etc. e.g. on Audi A4, VW Passat (‘97 onwards) TDI (incl. PD).

• E14, 18 for Opel / Vauxhall 1.0, 1.2, 1.4 petrol engines. e.g. on Corsa, Agila, Astra and Meriva etc.

www.promeister.com

• • • •

37

PT5365

Remsträckningsverktyg, Volvo Features • Used to service the serpentine belt.

Applications Model • 240, C30, C70 (06~), C70 Convertible (~05), C70 Coupe (~02), S40 (~04), S40 (04~), S60 (~09), S70, S80 (~06), V40 (~04), V50, V70 (~00), V70 (00~08), V70 XC (~00), V70 XC (01~) / XC70 (~07), XC90 (03~)

www.promeister.com

Engine • B4194T, B4194T2, B4204T, B4204T2, B4204T2 CVVT, B4204T3, B4204T4, B4204T5, B5204T3, B5204T4, B5204T5, B5234T3, B5234T7, B5234T8, B5244S, B5244S2, B5244S4, B5244S5, B5244S6, B5244S7, B5244SG, B5244SG2, B5244T, B5244T2, B5244T3, B5244T4, B5244T5, B5254T, B5254T2, B5254T3, B5254T4, B5254T7, B5254T9, D5244T, D5244T18, D5244T2, D5244T3, D5244T4, D5244T5, D5244T6, D5244T7

38

T50

M14

T60

PT5366

Centreringsverktyg FIAT C510 Dualogic växellåda Features • To lock the selection lever inside the actuation hydraulic unit.

• The tool should be fully tightened and should not be removed to allow the hydraulic unit to be correctly fitted.

• Suitable for 1.3 Multi-Jet robotized gearbox.

Install the tool to lock the selection lever inside the actuation hydraulic unit.

www.promeister.com

Undo the protection plug for the hydraulic unit selection lever locking tool.

39

PT5379

Vattenpumpsverktyg VW T5 Features • This set allows the crankshaft rotation on TDC-position and the crankshaft counterhold, during the loosening of the crankshaft center screw or of the water pump toothed wheel fastening screw. It is also suitable for removal or extraction of the water pump toothed wheel and water pump itself.

• For VW T5, Touareg 2.5 L 5-cylinder TDI engines.

• OEM codes: OEM T10221 / T10221A / T10222 / T10222A / OEM T10225 / T10225A • Car models: VW T5, Multivan, Touareg, LT • Engine codes: BAC, BLK, BPD, BPE, AXD, AXE, BLJ, BNZ, BPC

Materials

www.promeister.com

• Cr-Mo with S45C Steel

40

PT5513

Kylsystempåfyllare, vakuum Features • Significantly shortens time for refilling new coolant by creating a vacuum in the cooling system • No need to undergo the time-consuming air bleeding • Minimizes the risks of engine overheating

Specifications

3

Hook for vacuum pump

1 Vacuum pump with gauge 4 Hose

A

A. Vacuum Gauge

B

B. Air Connector

C D E

C. Air Switch D. Air Valve

F

E. Coolant Valve

G

F.

Coolant Hose Connector

G. Radiator Cap Connector

www.promeister.com

Universal 2 Radiator Adapter

41

PT5514

Kylsystemtestare & påfyllare, inkl. adapters, 26 delar Features • Set for testing leaks in automotive cooling system and refill new coolant by creating a vacuum in cooling system • Includes 17 adapters for major vehicle brands on market • Adapters and pump are made of light weight and durable nylon 6-6 • Connectors (blue and black) are for testing pressure caps • Includes a thermometer for safety reasons

Specifications 1

3

5

2

4

6

7

www.promeister.com

8

42

9

10

No Description

Specifications

Material

1

Pressure Pump

0-2.5kg/cm² (35 psi)

Nylon 6-6

2

Pump Hose

Max. pressure: 200 psi

Rubber

3

Black Cap Tester

For R123 and R124

Nylon 6-6

4

Blue Cap Tester

For R123 and R125

Nylon 6-6

5

Test Cap

No. 3 to No. 5

Steel

6

Test Cap

No. 6 to No. 19

Nylon 6-6

7

O-ring

Various sizes

NBR

8

Conical Adapter

Universally applicable

Rubber

9

Coolant Hose

L: 1200mm

PVC

10

Air Bleeding Hose

ø8x12x600mm

PVC

A

Vacuum Gauge -76 - 0inHg

B

Shop Air Connector

C

Air Switch

D

Air Bleeding Exit

E

Air Control Valve

F

Hook and Chain

G

Coolant Control Valve

H

Coolant Hose Connector

I

Test Cap Connector

A

F

B

G

C D

H

E

I

VÄTSKE-, BRÄNSLE OCH OLJEHANTERINGSVERKTYG

(FLUID, DIESEL/PETROL, AND OIL HANDLING TOOLS)

PT5311

Sätesbrotch för dieselinjectorer, 9 delar Features • To re-face the diesel injector seat in order to make the new or reconditioned injector to be fitted correctly.

• To clean and re-cut injector seat with universal application.

• Unique double lock design to connect reamer and pilot post securely.

• Includes a T-handle with magnet for enhanced strength.

Specifications • Reamer Material: SKD11 • Cutter Surface: Polish • HRC: 58-60 Unit: mm

17x21mm Angled Reamer

17x17mm Angled Reamer

38 Ø21

Ø17

Ø17

(Fiat/Iveco)

Mercedes-Benz CDI

Delphi/Bosch Injectors (BMW/PSA/Renault/Ford)

15x19 Flat Reamer

17x19mm Flat Reamer

Injector Cleaner

38

38

50

Ø15

Ø19

Universal Applications

www.promeister.com

38

38 Ø17

Ø19

44

17x17mm Flat Reamer

Ø17

Bosch Injectors (Mercedes CRD)

Reamer Technical Data Injector Cleaner Operation Clean

H19

Ø19

Cleaner Technical Data Cleaner Material : SKD11 HRC 58-60

PT5313

Oljepluggsverktyg, magnet Features • Drain old and hot engine oil, transmission fluid and gear oil without danger.

• Strong magnet grips the oil plug properly.

• Makes oil changing hassle free • Universal application

Specifications A

A - High Power Magnet

B

ø17.9mm

Size

17.9mm

Thickness

3mm

Max Working Temperature

120 degrees

B - Magnet Holder

3mm C 285mm

Angle

90 degrees

Material

Steel

Surface Finish

Chrome

Width

22mm

Height

13.5mm C - Wire

Material

Steel Wire

Size

1/8”

Length

185mm D - Handle

D

Material

Plastic

Color

Black

Instructions Step 1: Slightly release the oil drain plug (Fig 1) Step 2: Install the strong magnetic drain plier onto drain plug (Fig 2 & 3) Step 3: Release oil drain plug (Fig 4 & 5)

Fig 2

Fig 4

Fig 5

www.promeister.com

Fig 1

Fig 3

45

PT5341

Oljepluggsverktyg för kompositpluggar, 4 delar Features • For removing and installing of the plastic oil drain plug at the plastic oil pan.

FT-17503A

3/8” Dr.

FT-17504A

FT-17505A

FT-150809C

FT-150809C for VW/AUDI/ŠKODA/SEAT Oil Drain/Cam Cover Plug Suitable for VAG 1.8, 2.0 TSI/TFSI; 1.6, 2.0 TDI

17 mm

VW

Beetle, Caddy, CC, Golf, Jetta, Passat, Polo, Scirocco, Sharan, Tiguan, Touran

AUDI

A1, A3, A4, A5, A6, A7, Q3, Q5, Q7, TT, TTS

ŠKODA SEAT

Ibiza, Octavia, Rapid, Superb, Yeti Alhambra, Leon, Toledo

FT-17503A for FORD/PEUGEOT/CITROËN Oil Drain Plug Suitable for FORD 2.0 TDCi FORD

C-Max (2015~), Focus (2014~), Galaxy (2015~), Kuga (2014~), Mondeo (2014~), S-Max (2015~

Suitable for PSA 2.0 HDi OEM Ref. VAG 06L103801

PEUGEOT

308 (2013~), 508 (2014~), 3008 (2009~), 5008 (2009~), 5008 (2009~), Traveller (2016~)

CITROËN

C4 (2013~), C5 (2009~, 2015~), DS4 (2014-2015), DS5 (2013~2015), Jumpy (2016~), Space Tourer (2016~)

FT-17504A for FORD Oil Drain Plug OEM Ref. FORD 1830727 / 2072363 OEM Ref. FORD BC3Z6730A / FT4Z6730A

Suitable for FORD 1.5, 1.6 TDCi / 1.0, 1.6 EcoBoost FORD

Transit / Tourneo Connect (2013~)

Suitable for FORD 1.5, 2.0, 2.3, 2.5, 2.7, 3.5, 3.7, 5.0, 5.2 petrol / 6.2, 6.7, 6.8 diesel FORD OEM Ref. FORD 1871598 / 1871600 OEM Ref. PSA 9801444780

Suitable for LINCOLN 2.0, 2.7, 3.7 petrol

www.promeister.com

LINCOLN

46

Edge (2015~2017), F-150 (2015~2016), Fusion (2017), Mustang (2015~2017), F-250/350/450/550 Super Duty - Diesel (2011~2012)

MKX (2016~2017)

FT-17505A for BMW Oil Drain Plug Suitable for BMW N13 - 1.6 / N20 - 1.6, 2.0 / N26 - 2.0 OEM Ref. BMW 11137605018

BMW

F07, F10, F11, F18, F20, F21, F22, F23, F30, F31, F32, F33, F33, F35, F36, F80, F82, F83, F87, E84, E89

PT5342

Dieselfilterverktyg VAG/Volvo Features • Specially designed to remove and install the fuel filter on VW / Volvo diesel engine.

• Suitable for VW Crafter 5-Cyl. diesel engine form 2006.

Volvo C30, C70, S40, S60, S80, V50, V60, V70, XC60, XC70, XC90.

• OEM Ref. VW T50011 / Volvo 9997084

www.promeister.com

1/2” Dr.

47

PT5349

Oljefilterverktyg off-set, 24-38mm, 5 delar Features

www.promeister.com

• 24mm / 27mm / 32mm / 36mm / 38mm with 3/8” square driver.

• Low profile design with offset drive.

• Special design for tight confined areas.

• For oil filters where access is limited.

48

Size

Brand

Model

24mm

BMW

N62 5 / 7 Series

27mm

Mercedes-Benz Ford Renault BMW Ford

A Class Fiesta 1.4 / 1.6 TDCi 1.5 / 1.9 / 2.2 / 2.5dci Mini Transit 2.2 / 2.4 / 3.2

32mm

Vauxhall/Opel Volkswagen Audi Ford Chevrolet Saturn Pontiac Oldsmobile GMC SAAB

Astra-G / Corsa-B Polo 1.2 / Transporter T5 1.9 A6 3.2 TSi V6 Transit 2.0 / 2.4 HHR / Cobalt / Cobalt SS / Malibu / Cavalier / S10 / Malibu, Maxx L-series / Ion / Vue G6 / Solstice / Sunfire / Grand AM Alero Sonoma 9-3

Mercedes-Benz 36mm

BMW Vauxhall/Opel Volkswagen

220d / E220d / M604 / C250d / E250d / M605 / E300d / M606 MB / MB Transporter M616 116MB / 100 Transporter M52 3 Series / 5 Series M60 6cyl / 5 / 7 / 8 Series M73 12 cyl 7 / 8 Series Vectra-B DI 16v Transporter T5 / Lupo 1.2 TDi / Toureg TDi

38mm

Vauxhall/Opel

Astra | Zafira 2.0 / 2.2 DTI

PT5351

Dropp-stopp-pluggar, 12 delar

5/16”

Ma

3/8”

10mm

le P

ale

Fem

Plug

www.promeister.com

lug

49

PT5352

Oljefilterverktyg, aluminium, 13 delar Specifications

A

www.promeister.com

E

50

F

B

G

C

H

D

J

L

K

M

I

PT5353

Reparationssats för oljesump, 64 delar Features • Kit for repairing damaged, stripped, or worn drain plug hole by enlarging the threads with taps provided and new (and bigger) drain plugs with copper washers • Includes four sizes for common vehicle makes

Taps (1 Pc each size)

Drain Plugs (5 Pcs each size)

Drain Plugs (5 Pcs each size)

All figures listed below, unless otherwise stated, are in millimeter (mm)

Instructions • Remove the drain plug.

• Use to the tap to create new threads on oil drain plug hole (Fig. 1).

• Clean the drain plug hole.

• Insert a new washer on the new drain plug provided, and connect the drain plug to the re-threaded drain plug hole.

www.promeister.com

Specifications

51

PT5357

Lageravdragare, 30-75mm, 11 delar

PT5357B

PT5357A

PT5357D

PT5357C

PT5357E

PT5357F

Applications PT5357D for Ford / Peugeot / Citroën / Lincoln Ford 2.0 TDCi: C-Max (2015~), Focus (2014~), Galaxy( 2015~), Kuga (2014~), Mondeo (2014~), S-Max (2015~) PSA 2.0 HDi Peugeot: 308 (2013~), 508 (2014~), 3008 (2009~), 5008 (2009~), Traveller (2016~) Citroen: C4 (2013~), C5 (2009~), Ds4 (2014~2015), Ds5 (2013~2015), Jumpy (2016~), Spacetourer (2016~) Ford: F-150 3.5L (2016~2017), F-150 2.7L, 3.3L, 3.5L, 5.0L (2018) Lincoln: MKZ 3.0L (2017), Continental 2.7L, 3.0L (2017~2018) PT5357B for Mercedes Mercedes: M176 / M177 / M178 (2015~2018), M276 (2014~2018), M278 / M157 (2014~2018), OM642 (2013~), OM651 (2013~2018), OM654 (2016~2017) PT5357E for BMW

www.promeister.com

BMW N13 - 1.6 / N20 - 1.6, 2.0 / N26 - 2.0: F07, F10, F11, F18, F20, F21, F22, F23, F30, F31, F32, F33, F34, F35, F36, F80, F82, F83, F87, E84, E89

52

PT5357A for Ford / Lincoln FORD 1.5, 1.6 TDCi / 1.0, 1.6 EcoBoost: Transit / Tourneo Connect (2013~) FORD 1.5, 2.0, 2.3, 2.5, 2.7, 3.5, 3.7, 5.0, 5.2 petrol / 6.2, 6.7, 6.8 diesel: Edge (2015~2017), F-150 (2015~2016), Fusion (2017), Mustang (2015~2017), F-250 / 350 / 450 / 550 Super Duty (diesel, 2011~2012)

17 mm

3/8” Dr.

FORD : 1830727/2072363 FORD : BC3Z6730A/FT4Z6730A

LINCOLN 2.0, 2.7, 3.7: MKX (2016~2017) PT5357C for DAF / MAN PACCAR MX-11 / MX-13: CF (2013~), XF (2012~) MAN D3876: TGX (2014~) MERCEDES : 0029902017

DAF : 1982821/1853604 MAN : 51903106010

FORD : 1871598/1871600 PSA : 9801444780

FORD : KX6Z6730B/ KX6E6730AB

BMW : 11137605018

VAG : 06L103801 PORSCHE : 95810380100

PT5357F for VW / Audi / Škoda / SEAT / Porsche VAG 1.8, 2.0 TSI / TFSI ; 1.6, 2.0 TDI VW: Beetle, Caddy, CC, Golf, Jetta, Passat, Polo, Scirocco, Sharan, Tiguan, Touran Audi: A1, A3, A4, A5, A6, A7, Q3, Q5, Q7, TT, TTS ŠKODA: Ibiza, Octavia, Rapid, Superb, Yeti SEAT: Alhambra, Leon, Toledo PORSCHE Type 991 / Type 95B: 911 Carrera / Carrera S 3.0L (2017~), 911 Carrera 4 / Carrera 4S 3.0L (2017~), 911 Targa 4 / Targa 4S 3.0L (2017~), Macan 2.0L (2017~)

PT5361

Bränsleledningsverktyg, 4 delar Features • Quick fuel filter replacement • The tool set for disconnecting quick-connect couplings on fuel lines.

• Suitable for VAG, Fiat, Jeep, Opel, Ford, Chrysler and Volvo.

www.promeister.com

OR

53

PT5362

Dieselpumpsavdragare VAG TDI Features • Used to removal of the high pressure fuel pump sprocket on the diesel engine.

• Suitable for 1.4L, 1.6L, 2.0L TDI engine: VW: Golf 2013~ Audi: A3 2013~ Škoda: Rapid 2012~, Octavia 2013~, Fabia 2014~, Superb 2015~, Kodiaq 2016~ SEAT: Alhambra 2011~, Ibiza 2008~, León 2013~, Ateca

www.promeister.com

15 mm

54

24 mm

PT5364

AC & bränsleledningsverktyg, demontering, 6 delar Features • Works on air conditioning line, fuel line, etc.

• Easily disconnects spring lock quick connect couplings on many vehicles.

www.promeister.com

Six sizes: 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”

55

PT5367

Dieselfilterverktyg Ford Transit TDCi Features • Special designed to remove and install fuel filter on Ford Transit 2.2L TDCi engine.

• Ford Transit 2014~ Transit 2006~2014 Transit Custom 2012~ Tourneo Custom 2012~

www.promeister.com

1/2” Dr.

56

Ford 1781617

PT5368

Oljeflterverktyg Hyundai/KIA Features • The wrench is designed specifically to service Hyundai / Kia vehicles with 2.0L or 2.2L diesel R-engine.

• Hyundai Tucson / ix35 2009~ Santa Fe / Maxcruz 2012~ • Kia Sportage (R) 2011~ Sorento (R) 2010~ Carnival / Sedona 2010~

263152F001

www.promeister.com

1/2” Dr.

57

PT5376

Bränslefilterverktyg VAG, montering Features

NEW

DESIGN • The fuel filter cover mounting tool is designed to press the fuel filter cover evenly and in a torsion-free manner into the seal seat in the fuel filter housing.

Applications • New design for both of “UFI“ and “MANN” fuel filter housing.

• VW, Audi, Škoda and Seat diesel vehicles.

• Also suitable for Multicar M27 / M28.

www.promeister.com

UFI

58

MANN

PT5377

Dieselfilterverktyg HDi-motorer Features • Specialist socket required for the removal of diesel fuel filter fitted to 2.0, 2.2 HDi engines found in some Citroën, Fiat, Ford, Lancia, Land Rover, Mitsubishi, Peugeot, and Volvo vehicles.

Applications Citroën C4 2.0 HDi 16v C4 Picasso 2.0 / 2.2 HDi C5 / C8 2.0 / 2.2 HDi 16V Jumpy 2.0 / 2.2 HDi Fiat Scudo / Ulysse Mk II 2.0 JTD 16V Ford Focus / Focus C-Max / Galaxy / Kuga / S-Max 2.0 TDCi Peugeot 307 / 308 / 407 / 607 / 807 / Expert 2.0 HDi 16V Volvo C30 / C70 / S40 Mk II / V50 2.0 Diesel (136 HP)

www.promeister.com

Engine sizes: 2.0 & 2.2 l HDi

59

PT5378

Dieselfilterverktyg Ford Transit TDCi Features • Specially designed to remove and install the fuel filter on Ford Eco Blue TDCi diesel engine from 2016.

Applications Ford Eco Blue 2.0L TDCi Transit 2016~ Transit Custom 2016~ Transit Custom Kombi 2016~ Tourneo Custom 2016~

1/2” Dr.

Engine type: Eco Blue TDCi, 2016-

www.promeister.com

32 mm

60

PT5410

Vätskepåfyllare inkl. adaptersats, 16 delar Features • Set for refilling fluids such as ATF, gear oil and differential oil.

• Especially designed for vehicles without a transmission dipstick.

• A combination of pneumatic and manual functions allow energy-saving work and precise refilling.

• 12.5L large tank suitable for transmissions that require large refill volume.

A B C D E F G H I J K L M N

Square Handle Manual Pumping Handle Connector to Hose Pressure Gauge Auto Pressure Release Fluid Refill Cap Tank Shop Air Switch Shop Air Connector Pressure Regulator Wire Reinforced Hose Connector to Tank Connector to Adapter Hose Switch

Pull backward to release pressure One stroke about 0.1 liter Male M20 × 2.0 0-35 psi / 0-2.5 kg/cm² Preset at 14.2 psi / 1.0 kg/cm² Open for refilling new fluid 12.5 liter / 3.3 US Quart Control compressed air Standard shop air connector 7-28.5 psi / 0.5-2.0 kg/cm² 1.5m / 59” in length Female M20 × 2.0 Female ø9.5mm Open for introducing new fluid

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

1/8” NPT Adapter 5/16”-24UNF Adapter M10 x 1.00 Adapter Short Hook Adapter Medium Hook Adapter Long Hook Adapter M18 x 1.50 Adapter M24 x 1.50 Adapter M22 x 1.50 Adapter M12 x 1.50 Adapter M18 x 1.50 Adapter M30 x 1.50 Adapter M8 x 1.00 Adapter M10 x 1.00 Adapter Flexible 300mm Adapter

Ford Volvo Volkswagen Volkswagen Volkswagen BMW, Honda, Nissan Toyota Audi and Volkswagen with DSG Audi with CVT Mercedes with 722.9 Škoda, Volkswagen Audi, Škoda, Volkswagen Nissan, Infiniti Volkswagen Passat Honda, Hyundai, Kia

www.promeister.com

Specifications

61

PT5412

Filternyckel DSG växellådsfilter, 24mm, kort, VAG Features • Specially designed to remove and install the transmission filter housing cover when changing the transmission filter on the DSG gearbox in VW, Audi, Škoda and Seat vehicles.

1/2” Dr.

24 mm

PT5413

Filternyckel DSG växellådsfilter, 24mm, lång, VAG Features • Specially designed to remove and install the transmission filter housing cover when changing the transmission filter on the DSG gearbox in VW, Audi, Škoda and Seat vehicles.

www.promeister.com

1/2” Dr.

62

24 mm

PT5414

Mercedes 9G-Tronic ATF Service Kit Features • Designed for draining and refilling ATF on Mercedes-Benz 9G-Tronic transmissions (type 725.0) • Special design for leak-free and spill-free ATF services • Refill adapter shall be used with an ATF refill pump and tank • ATF refill adapter to fit with ProMeister PT5410 and PT5415 PT5410

PT5415

Specifications

1

2

3

1

Stick-style drainer

To turn overflow pipe to drain old ATF

2

Cut-type drainer

To hold small volume of old ATF when drain plug is released

3

Refill adapter

To refill new ATF by connecting to drain plug hole

Instructions

3

Position 2 - Drain small volume of ATF with a cup-type drainer.

Position 3 - Level checking position. Refill with a refill adapter.

Position 4 - Drain completely.

2 1

4

www.promeister.com

Position 1 - Installation and dismantling with a stick-type drainer.

63

PT5415

Transmissionspåfyllare inkl. adapersats, 21 delar Features • Manual type pressure tank to refill ATF on automatic transmissions without a dipstick.

• Includes 20 adapters for most common vehicles.

• Tank with 6 liter / quarts capacity, suitable for most transmissions - Audi, Cadillac, Ford, GMC, Infiniti, Mercedes, Nissan, Toyota, Volkswagen, and Volvo.

• Specially designed tank base for feet to step on to stabilize the tank while pumping.

• Adapters in nylon 6-6 material provides lightweight but also durable features.

Specifications Hose with internal spring to prevent from being kinked.

Hand pump can be securely threaded on tank with a comfortable hand grip.

Control pressure and volume to be introduced into transmission

6 liter / quarts tank capacity suitable for most oils and fluids on a vehicle.

www.promeister.com

Specially designed tank base for feet to step on to stabilize the tank while pumping.

64

20 types of adapters for most common vehicles on the market.

Material: nylon 6-6

PT5416

Adaptersats för transmissionspåfyllare ATF, 5 delar

Features • ATF refill adapters to fit with ProMeister PT5410 and PT5415

PT5410

PT5415

• Suitable for Cadillac, Chevrolet, Infiniti, Mercedes, Nissan, and VAG • Nylon 6-6 material features its high durability and light weight

No. 16 adapter

M12 × P1.25 for Nissan and Infiniti

No. 17 adapter

M14 × P1.50 for VAG

No. 18 adapter

M10 × P1.50

No. 19 adapter

M12 × P1.75 for Cadillac and Chevrolet

No. 20 adapter

Mercedes-Benz 9G-Tronic transmissions

www.promeister.com

Specifications

65

PT5417

Vätskepåfyllare, utan adaptersats (PT5420) Features • Set for refilling fluids such as ATF, gear oil and differential oil.

• Especially designed for vehicles without a transmission dipstick.

• A combination of pneumatic and manual functions allow energysaving work and precise refilling.

• 12.5L large tank suitable for transmissions that require large refill volume.

Specifications

www.promeister.com

A B C D E F G H I J K L M N

66

Square Handle Manual Pumping Handle Connector to Hose Pressure Gauge Auto Pressure Release Fluid Refill Cap Tank Shop Air Switch Shop Air Connector Pressure Regulator Wire Reinforced Hose Connector to Tank Connector to Adapter Hose Switch

Pull backward to release pressure One stroke about 0.1 liter Male M20 × 2.0 0-35 psi / 0-2.5 kg/cm² Preset at 14.2 psi / 1.0 kg/cm² Open for refilling new fluid 12.5 liter / 3.3 US Quart Control compressed air Standard shop air connector 7-28.5 psi / 0.5-2.0 kg/cm² 1.5m / 59” in length Female M20 × 2.0 Female ø9.5mm Open for introducing new fluid

PT5515

Bränsletankstömmare, 40 liter Features • Stainless steel fuel drainer with venturi type suction. 40L Capacity tank suitable for petrol or diesel. Supplied with suction tubes and adaptors for breaking into vehicle fuel system. CE Certified (971231EC).

Specifications • Air Consumption: 6cfm • Recommended Air Pressure: 72-100psi

Refer to Instruction Manual

No Open Flame

Wear Protective Gloves

Wear Eye Protection

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Tank Outlet Connector Air Inlet Valve (shown closed) Air Inlet Connector Suction Probe Stowage Suction Inlet Connector Suction Tube (connected) Pressure Gauge (indicates pressure or vacuum within tank) Tank Capacity Sight Tube Tank (pressure vessel) Suction IN/Discharge OUT Switch Valve. (shown in suction position) Handle Manual Pressurization Valve Fume Venting Tube Tank Pressure Relief Valve

www.promeister.com

• Capacity: 40L

67

PT5516

Bränsletankstömmare, 90 liter Features • Stainless steel fuel drainer with venturi type suction. The unit is used for pumping fuel from either a diesel or petrol vehicle.

Supplied with suction tubes and adaptors for breaking into vehicle fuel system. CE Certified (971231EC).

Specifications • Air Consumption: 12cfm • Recommended Air Pressure: 72-100psi • Capacity: 90L

Refer to Instruction Manual

No Open Flame

Wear Protective Gloves

Wear Eye Protection

www.promeister.com

1 2

68

3 4 5 6 7 8 9 10 11 12 13 14 15

Air Inlet Connector Pressure gauge indicates pressure or vacuum within tank Tank Outlet Connector Tank Inlet Connector Filter Cartridge Hose End Stowage Only Tank (pressure vessel) Fume Venting System (container) Air Inlet Regulator Air Inlet Valve Handle Fume Venting System Tank Pressure Relief Valve Tank Manual Pressure Relief Valve Suction IN/Discharge OUT Switch Valve

PT5522

Olje/vätskesug, pneumatisk, inkl. sugsonder, 9,5 liter • Three air outlet with check valve design for a quick & easy air extraction.

• Easy to operate; suitable for engine oil, gear oil, brake fluid, water, etc.

• Provided with new design decompression valve for easy an easy release of negative pressure.

• Fixing valve & safety cup for automatic cut-off extracting.

Specifications • Air Inlet: 1/4" • Average Air Cons: 2cfm • Working Pressure: 70-170psi • Temperature Range: 1°C~95°C • Max. Capacity: 9,500cc

Index No. 1 1-1 1-2 2 3 4 4-1 5 6 6-1 7 8 9 10 11 12 13 14 15 16 16-1 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 40-1 40-2 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61

Description Handle Check Valve Body Noise-Reduction Cover Washer Oil Seal Screw Nut Screw Cover Housing Decompression Valve O Ring Tank Piston Tube Washer Plastics Washer Piston Screw Packing Aluminum Tube Safety Valve Safety Valve Packing C Locker Safety Buoy Packing Spring Check Valve Body Tank Stand Footboard Adapter O Ring Oil Hose Nylon Hose Adapter Nylon Hose Adapter Nylon Hose Adapter Silicon Hose One Touch Controller Adapter Brake Coupler Ring Leader Wire Prop Nut Washer Screw Spring Check Ball Washer Valve Vacuum Stand Packing Nut Packing Nut O Ring Vacuum Valve O Ring Vacuum Body Noise-Reduction Nut Coupler Dust Cover Tube Stand Screw Extension Tube Tube

Remark 2 Pcs 2 Pcs

2 Pcs 4 Pcs 5 Pcs 7 Pcs

2 Pcs

2 2 2 3 3

Pcs Pcs Pcs Pcs Pcs

2 Pcs

2 2 4 2

Pcs Pcs Pcs Pcs

2 Pcs 2 Pcs

The type and specifications may be changed with or without notice.

www.promeister.com

Features

69

PT5523

Olje/vätskesug inkl. sugsonder, 5,5 liter Features • Designed for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines and industrial machinery. Suitable also for low viscosity fluid such as water.

Specifications • Tank and Pump Assembly • 3/8” Suction Hose x1500mm • 1/4” Nylon Oil Suction Tube x 720mm • 3/4” 3/8” ID Gear Oil Tube x 400mm

Instructions 1. Park vehicle on level ground. Ensure the transmission of the vehicle is in “neutral” or “park” position and apply the parking brake.

2. Start the engine. Allow the engine to idle until it reached normal working temperature. Turn the engine off while it’s done.

3. Choose suitable suction tube from the selection and insert it through dip stick tube until reaching the bottom of oil pan. (fig 1) Note: Do not bend the suction tube during the inserting procedure.

4. Connect suction tube to the suction hose. (fig 2) 5. Raise the pump handle on top of the cover until it reaches its highest limit. Start pumping the handle and the unit will begin to extract oil from the engine crankcase. (fig 3) Note: When oil in the tank reach max level the vacuum will release to prevent overflowing.

www.promeister.com

6. After finishing, withdraw suction tube from the vehicle.

Supply new oil to the vehicle. Run the engine to circulate the new oil and check the level if any shortage.

70

fig 1

fig 2

fig 3

Connect suction tube to the suction hose

Choose suitable suction tube from the selection

PT5528

Spilloljebehållare, pneumatisk, inkl. sugsonder, 100 liter Specifications • Air Inlet: 1/4” Quick Plug • Extension Funnel: Yes • Capacity: 100L / 26.4Gal • Air pressure for vacuum: 7~8bar / 100~115psi • Max draining pressure: 1bar / 14.5psi • Suction speed: (oil temperature <90°C, suction tube diameter ø6mm): 2lpm / 0.5gpm • Suction tube length: 2000mm / 78.7” • Draining hose length: 1600mm / 63” • Collection bowl capacity: 18l / 4.8gal • Extension Funnel diameter: 606mm / 23.8”

10

1 9

3

8

Part No.

Description

Qty

1

Oil collecting bowl assembly

1

*2

Probe kit

1

3

Probes container

1

*4

Quick plug

1

*5

Bell valve

1

6

Reservoir

1

*7

Discharging hose assembly

1

*8

Safety valve

1

*9

Suction hose assembly

1

10

Vacuum assembly

1

#: Optional accessories *: Wearing parts

6

www.promeister.com

2

71

PT5529

Spilloljebehållare, manuell, 70 liter Specifications • Air Inlet: 1/4” Quick Plug • Extension Funnel: Yes • Capacity: 70L / 18.4Gal • Max draining pressure: 1 bar / 14.5psi • Draining hose length: 1600mm / 63” • Collection bowl capacity: 18L / 4.8Gal • Extension funnel diameter: 606mm / 23.8” 1 2 3

4

6

5

Part No.

Description

Qty

1

Oil collecting bowl assembly

1

2

Reservoir

1

3

Safety valve

1

*4

Discharging hose assembly

1

*5

Ball valve

1

*6

Quick plug

1

www.promeister.com

#: Optional accessories *: Wearing parts

72

PT5608

Bränsleledningstång, demontering, justerbar Features • Used for fuel lines with quick connect, snap/slide & lock couplers found on many vehicles.

• Swivel jaws - for use in areas with restricted access.

• Suitable for Alfa, Audi, BMW, Chrysler, Citroën, Fiat, GM, Lancia, Lexus, Mercedes, Opel, Peugeot, Renault, Seat, Škoda, Toyota, Vauxhall, VW, etc.

Also for quick connect couplers with small release tabs.

slide & lock

www.promeister.com

snap

73

PT5613

Bränsleledningsverktyg Features • Design to professionally disconnect/ loosen as well as mount/lock the fuel return line push-fit connector (round design) at the injectors. An indispensable tool when removing fuel return line push-fit connectors.

Incorrect loosening may damage the connector resulting in the complete fuel return line in the engine compartment to be replaced.

Applications

www.promeister.com

VW-Audi,Sear and Skoda 2.0,2.7 and 3.0 TDI Common Rail Diesel engine; as fitted to VWEos, GolfV, GolfVI, Jetta, Passat, PassatCC, Scirocco, Tiguan, Transporter T5, Phaeton; Audi A3,A4,A5,A6,A7,Q5; Seat Exeo; Skoda Yeti etc.(Engine code; BMK, BPP, CAAA, CAAB, CAAC, CAAD, CAAE, CAGA, CAGB, CAGC, CBAB, CBAC, CBDA, CBDB, CBDC, CDUD)

74

PT5701

Tankarmatursverktyg, Volvo Features • This specialized tool is designed to remove and install the fuel tank locking ring on all Volvo P2 platform vehicles.

• Used on the following engines: B5204T4, B5204T5, B5234T3, B5234T7, B5244S, B5244S2, B5244S6, B5244SG, B5244SG2, B5244T3, B5244T4, B5254T2, B6284T, B6294S, B6294S2, B6294T, B6304S3, B8444S, D5244T, D5244T2, D5244T3, D5252T MSA 15.8, B5204T3.

• OEM Ref. 9995720

1/2” Dr.

1998 - 2006

S80 (P23)

2000 - 2009

S60 (P24)

2000 - 2008

V70 (P26E) XC70 (P26L)

2003 - 2014

XC90 (P28)

www.promeister.com

Volvo V2 Platform

75

PT5702

Tankarmatursverktyg, Volvo Features • This specialized tool is designed to remove and install the fuel tank locking ring on Volvo diesel or petrol engine • Suitable for: C30 / C70 (06~) / S40 (04~) / S60 (11~) / S80 (07~) / S80L / V40 (13~) / V40 Cross Country / V50 / V60 / V70 (80~) / XC60 / XC70 (08~).

• OEM Ref. 9997093

Applications

www.promeister.com

Used on the following engine: B4164S3, B4164T, B4164T3, B4164T4, B4184S11, B4184S8, B4204S3, B4204S4, B4204T11, B4204T12, B4204T15, B4204T6, B4204T7, B5204T8, B5204T9, 5244S4, B5244S5, B5254T10, B5254T11, B5254T12, B5254T14, B5254T3, B5254T6, B5254T7, B5254T8, B56324S, B6324S2, B6324S4, B6324S5, D4162T, D4164T, D4204T, D4204T2, D4204T5, D5204T, D5204T2, D5204T3, D5204T4, D5204T5, D5204T6, D5204T7, D5244T10, D5244T11, D5244T13, D5244T14, D5244T15, D5244T17, D5244T19, D5244T4, D5244T5, D5244T8, D5244T9.

76

1/2” Dr. 21 mm

PT5703

Tankarmatursverktyg, VAG Features This tool is designed to remove and install the fuel tank locking ring.

120mm internal diameter with 3 slotted teeth to grip ring.

OEM Ref. T10202 (3087) Application (2000~): AUDI - A3, A4, A6, A7, A8, Q3, Q5, Q7, R8, TT VW - Polo, Beetle, Golf, Golf Plus, Golf Cab, Jetta, Eos, Scirocco, Passat, Passat CC, CC, Sharan, Touran, Tiguan, Touareg, Phaeton, Caddy, Transporter including LCV models Porsche - Cayenne

1/2” Dr.

www.promeister.com

• • • •

77

PT5706

Tankarmatursverktyg universal, 21mm Features • This tool is designed to remove and install the fuel tank locking ring.

• Suitable for Audi, BMW, Chevrolet, Chrysler, Fiat, Ford, GM, Hyundai, Jaguar, Kia, Land Rover, Mercedes, Nissan, Opel, Vauxhall, Volvo and VW vehicles, etc.

1/2” Dr.

www.promeister.com

21 mm

78

TÄND- OCH GLÖDSTIFTSVERKTYG (GLOW PLUG, IGNITION COILS, AND INJECTION TOOLS)

PT5343

Glödstiftsverktyg 1/4", tryckluftsdrivet, sats 9 delar Specifications • Free Speed: 10000rpm • Torque: 1=10Nm, 2=20Nm, 3=30Nm, 4=40Nm • Net. Weight: 0.8kg • Air Inlet: 1/4” • Avg. Air Consumption: 150L/min.

• Exhaust System: Rear • Sug. Air Pressure: 90psi Ref

M

B N

L

A

C D

www.promeister.com 80

Impact Wrench

B

1/4”D

C

Trigger

D

Forward/Release

E

Torque/Speed Adjuster

F

Air Line Adjusted

G

Impact Socket 12mm

H

G

H

Impact Socket 11mm

11mm CR-MO

12mm CR-MO

I

Impact Socket 10mm

J

Impact Socket 9mm

K

Impact Socket 8mm

L

Universal Joint

M

50mm Extension

N

100mm Extension

E F

Description

A

K

J

I

8mm CR-MO

9mm CR-MO

10mm CR-MO

INDEX. NO.

PARTS. NO.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

108N01 108N02 108N03 108N04 108N05 108N06 108N07 108N08 108N09 108N10 108N11 108N12 108N13 108N14 108N15 108N16 108N17 108N18 108N19 108N20 108N21 108N22 108N23 108N24 108N25 108N26 108N27 108N28 108N29 108N30 108N31 108N32 108N33 108N34 108N35

DESCRIPTION Air Inlet Exhaust Deflector Cover Pin Motor Housing Reverse Bushing "O" Ring Reverse Valve "O" Ring Throttle Valve "O" Ring "O" Ring Spring Pin Trigger Ball Bearing Gasket Rear End Plate Rotor Blade Rotor Cylinder Spring Pin Front Plate "O" Ring Oil Seal Ball Bearing Cam Hammer Cage Hammer Dog Hammer Pin Anvil Anvil Collar Washer Hammer Case Cover

QTY. PER TOOL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1

PT5344

Tändspoleavdragare VAG Features

VW

Up 2011~, Polo 2012~, Golf 2013~, Beetle 2014~, Caddy 2015~, Passat 2014~, Tiguan 2015~, Touran 2015~, Sharan 2015~

Audi

A1 2012~, A3 2013~

Škoda

Citigo 2011~, Fabia 2014~, Octavia 2013~

SEAT

Mii 2011~, Ibiza 2013~, Leon 2013~

www.promeister.com

• Used for removing “pencil-type” ignition coil on 1.0L / 1.0L TSI / TFSI - 1.2L TSI - 1.4L TSI / TFSI - 2.0L GTI engines.

• Suitable for engine codes (petrol) : CJZB, CJZA, CBZB, CJZD, CYVB, CTHD, CTHA, CZCA, CZDB, CZDA, CMBA, CPVB, CPVA, CPCB, CHPA, CPTA, CAXA, CAVA, CAPB, CAVD, CXSA, CDGA, CXEA, CXSB, CKMA, CAVE, CHHB, CHHA, CCZB, CPGA, CHZB, CHYB, CHYA.

81

PT5345

Tändspoleavdragare VAG • Used for removing “pencil-type” ignition coil on 4-cyl. direct injection engine (Generation III).

• OEM Ref. T10530

www.promeister.com

Volkswagen Golf (2013>) Jetta (2011>)

82

Audi

A3 (2013>)

Škoda

Octavia (2013>)

SEAT

Ibiza (2008>) Mii (2011>) Leon (2013>)

Porsche

Macan (2014>)

FJÄDER- OCH STÖTDÄMPARVERKTYG, FRAMOCH BAKVAGN (SUSPENSION AND CHASSI TOOLS)

PT5212

Fjäderspännare multilink, för centrummontering Features • Suitable for lower wishbone diameter size less than 30mm • Can perform on-car working • Can be operated with an air wrench • Provided with a 100Nm-torque extension bar • Provided with Product Liability Insurance • Patented on three-point locking design • Break Point: 9,500kgf = 93,100N • Max Load: 3,800kgf = 37,240N

Specifications Big C Jaw (One Pair)

18 Ø150

18 Ø130

Small C Jaw (One Pair)

PROCESS

90°

Forge SURFACE

Ø140 Ø90

28

(Unit: mm) 290mm

653g

Zinc Phosphate

Main Body

Ø66

28

732g

Torque Extension Bar

Zinc Phosphate

248g

180mm

95

220

Forge SURFACE

Ø25 Ø10

www.promeister.com

PROCESS

Ø120

(Unit: mm)

Ø29

84

130

90°

150

998g

LENGTH

MATERIAL

290mm

SCM440

MATERIAL

MAX TORQUE

Steel & CrMo

100Nm

SURFACE Black STROKE 95-220mm (Unit: mm)

HEX 1/2”

(Unit: mm)

APPLICATIONS Chevrolet, Chrysler, Citroën, Ford, Honda, Hyundai, Kia, Mazda, Mitsubishi, Peugeot, Renault, Šcoda, Suzuki, Toyota, Volvo, VW, BMW 3 Series (19962013) Mercedes-Benz W202 W204 (1997-2013)

PT5213

Fjäderspännare Macpherson, 80-195mm Features • Set for compressing MacPherson shock absorber coil springs includes three pair of C jaws for fitting various sizes • Jaw covers are RoHS certified, containing no SVHC materials • Includes an extension bracket for conical springs • Product liability insurance provided • Break point: 4,275 kgf (ca. 14,900N) • Max. load: 1,710 kgf (ca. 16,760N)

Specifications

Medium Jaws Use Range 110-150mm / 4.33-5.90 in

Big Jaws Use Range 140-195mm / 5.51-7.68 in

Extension Braket

Tool Body

Fastener M6 × P1.0 ×25L

www.promeister.com

Small Jaws Use Range 80-115mm / 3.15-4.53 in

85

PT5216

Styrledsverktyg Features • Removes worn inner tie rods and install new ones with a 27mm spanner or 1/2” Dr. • ø35-45mm mainly for European passenger cars • Specially designed with three rolling wheels in tool head for gripping tightly the axial joint

Specifications Rolling Wheels

Head Part

Hollow Body

Hex 27mm

1/2” Dr.

Application Range:

Overall Length 400mm | 15-3/4”

ø35-45mm

Instructions

www.promeister.com

Removal 1. Remove the cotter pin on axial point.

2. Insert the tool through the inner tie rod until the axial joint reaches the tool head (Fig 1) 3. Ensure the rolling wheels grip the tie rod securely.

4. Use a spanner or a 1/2” Dr. Ratchet wrench to turn counter-clockwise to loosen the axial joint (Fig 2) NOTE: DO NOT use an impact tool or air wrench to operate this tool.

86

Installation 1. Insert a new tie rod through the hollow body of the tool.

2. Use a spanner or a 1/2” Dr. Ratchet and turn clockwise for installation.

3. Put a cotter pin on axial joint.

Fig 1

Fig 2

PT5217

Styrstagsverktyg universal, 28-35mm Features • Removes worn inner tie rods and install new ones with a 27mm spanner or 1/2” Dr. • ø28-35mm mainly for European passenger cars • Specially designed with three rolling wheels in tool head for gripping tightly the axial joint

Specifications Rolling Wheels

Head Part

Hollow Body

Hex 27mm

1/2” Dr.

Application Range:

Overall Length 400mm | 15-3/4”

ø28-35mm

Instructions

Installation 1. Insert a new tie rod through the hollow body of the tool.

2. Use a spanner or a 1/2” Dr. Ratchet and turn clockwise for installation.

3. Put a cotter pin on axial joint.

Fig 1

Fig 2

www.promeister.com

Removal 1. Remove the cotter pin on axial point.

2. Insert the tool through the inner tie rod until the axial joint reaches the tool head (Fig 1) 3. Ensure the rolling wheels grip the tie rod securely.

4. Use a spanner or a 1/2” Dr. Ratchet wrench to turn counter-clockwise to loosen the axial joint (Fig 2) NOTE: DO NOT use an impact tool or air wrench to operate this tool.

87

PT5234

Kulledsverktyg, Volvo Features • Specially designed for the Lower Control Arm Ball Point; (M) mounting and (D) dismounting.

• For cars with aluminum control arms and steel wishbones alike.

• Suitable for: Volvo S60 (2000-2009), S80 (19982006), V70 / XC70 (19992007), XC90 (2002-2014) • OEM Ref. 9995796

M

D

M14x1.5 D D Lower Control Arm Ball Joint

M

M

M12x1.75 M14x2.0

How To Use

1

www.promeister.com

• Remove the ball joint bolts.

88

2

3

• Install the adapter on the • Install the new ball joint ball joint. loosely using the guide bolts.

• Tap loose the ball joint.

4 • Press up the ball joint against the seat with the press tool.

• Drive in the ball joint with a hammer.

PT5238

Kulledsverktyg universal, hydrauliskt 7 ton Features • It has a special design and function for dismounting the ball-joint on passenger cars.

• Both of the tools can switch position in tight areas of the wheel suspension.

• The jaw opening also can be turned to fit the ball-joint size.

Specifications • Capacity Force: 7 tons • Jaw Opening: 25, 32mm • Fit Range: 0-72mm

C

B

www.promeister.com

A

89

PT5239

Delningsverktyg VAG, nedre stötdämparinfästning Features

www.promeister.com

• This kit is used to spread the steering knuckle to enable the removal and fitting of shock absorbers without the risk of damaging the aluminum or cast iron knuckle.

• The tool is adjustable and suitable for steering knuckles with either a centralized slot or a noncentralized slot.

• Wide range of vehicle applications.

• Designed for twin ball joints as fitted to Audi and VW control arms.

90

PT5250

Styrledsverktyg universal Features • Universal application.

• Fits most cars and some trucks.

• Designed for the quick and trouble-free removal and installation of the tie rod ends .

• After separating the ball joint from steering knuckle, slip tool over tie rod end and remove.

Specifications U-Opening: 34×18.5mm Length: 57.5mm Inner: ø49mm Drive: 1/2” Square

www.promeister.com

• • • •

91

PT5259

Glappkontrollverktyg, fram och bakvagn Features The axle as previously detector is a simple but effective aid for detecting sources of vehicle axles.

Advantages: • Operational test under load as when driving.

• Possible visual inspection and scanning of components during the test, increases the level of security.

• Considerable time saved in diagnosing the fault • Clear and plausible test results for customers • Avoid errors linked to exchange of parts • Economical test method • Simple handling • One-man operation

Application

Instructions Step 1: Screw the rod into the tube as shown

www.promeister.com

Step 2: Put this tool horizontally with the tire as shown.

92

Suspension top mount / bearing bushing / carrier joint / track-rod end / linking rod / wheel bearing / axial joint / steering gear / stabilizer etc.

Suitable for all trucks, vans, SUVs and vans up to 3.5t.

Step 3: Please check the brakes were held before putting this tool vertically with the tire as shown.

PT5267

Hjulinställningsverktyg Features

www.promeister.com

• For releasing and adjusting track rods from ø14mm to 23mm.

• Allows working even in confined spaces.

93

PT5272

Delningshylsa fjäderben Specifications • The length is 50mmL • Size is 5.5*8.2mm

Application

www.promeister.com

• Volkswagen, Audi, BMW, Citroën, Ford, Seat, Škoda, Renault, Peugeot, Honda, Toyota

94

PT58205

Stötdämparverktyg universal, 19 delar Features • Set for removing shock absorber caps • Includes a large variety of sockets with various sizes • Provided with bits with special sizes • DO NOT use with an air/impact wrench

Mark

Application

10.5mm

10.5 x 3.5

Volkswagen Golf Rear Axle

12.5mm

12.5 x 3.5

Volkswagen Polo Front Axle

14.5mm

14.5 x 5

Audi 80, Volkswagen Polo, Golf, Passat

16mm

S 16mm

Audi, Fiat, SEAT, Volkswagen

17mm

S 17mm

Audi, Ford, Fiat, SEAT, Volkswagen

18mm

S 18mm

Audi, Ford, Fiat, Japanese vehicles, Opel, Peugeot, Renault, Rover, SEAT, Volkswagen

19mm

S 19mm

Audi, Citroën, Fiat, Opel, Peugeot, SEAT, Toyota, Volkswagen

21mm

S 21mm

Audi, Chrysler, Ford, Japanese vehicles, Mercedes-Benz W203, Volkswagen

22mm

S 22mm

Audi, BMW, Citroën, Fiat, Opel, Peugeot, Renault, SEAT, Volkswagen

24mm

S 24mm

Volvo

27mm

S 27mm

Audi, Citroën, Peugeot, Volkswagen

5.2mm

DD5.2

Audi, Nissan, Volkswagen

6mm

DD6

Audi, Renault, Volkswagen

7mm

DD7

Audi, Fiat, SEAT, Volkswagen

10mm

DD10

Fiat, SEAT, Volvo

6mm

6mm

BMW, Citroën, Fiat, Ford, Japanese vehicles, Opel, Peugeot, Renault, SEAT

7mm

7mm

Audi, Citroën, Fiat, Mercedes-Benz (W203), Renault, SEAT, Volkswagen

10mm

10mm

Reversible Ratcheting Wrench 10mm

www.promeister.com

Specifications

22mm

22mm

Reversible Ratcheting Wrench 22mm

95

Size

Diagram

10.5mm

S 16mm

S 19mm

12.5mm

S 18mm

S 17mm

S 21mm

S 24mm

S 27mm

DD 10mm

7mm

S 22mm

DD 7mm

DD 6mm

DD 5.2mm

6mm

14.5mm

PT58208

Mothållsverktyg hjulnav, 6 delar Features • Designed to allow the drive flange to be locked and prevent rotation when loosening or tightening inner drive shaft mounting bolts and hub nuts.

• Easily fitted utilizing the vehicles own wheel bolt or nut ensuring the specially designed plastic wheel wedges between the brake caliper and drive flange.

• Drive flange hub locking device.

• Used to lock car drive flanges and drive shafts allowing the removal of driveshaft and hub fixings.

• One man operation - no need for an assistant to hold the flange.

• Easy to use and reposition for multiple bolt removal (inner drive shaft bolts).

• Durable plastic wheels prevent damage to brake components or hub.

Specifications Reference Description A.......................... Mounting Arm B........................... Wheel Wedges C.......................... Mounting Bolts for B

Instructions Components A/B/C • Assemble the component A/B/C as shown.

• When fitted to the vehicle, the plastic wheel wedge should jam against the brake caliper to prevent the drive flange from turning. See fig 1a, 1b & 1c. fig 1a

fig 1b

fig 1c

• Fit the assembly as shown in fig 2 below.

www.promeister.com

fig 2

96

TEST OCH DIAGNOSVERKTYG (TEST AND DIAGNOSTIC TOOLS)

PT5370

Cylinderläckagetestare

1 5

6 5

5

7 4

3

2

8

Specifications 1 Dual gauged leak detection unit 0-100psi (0-7 bar) 2 Fixed short connector M14x40mm 3 Fixed long reach adaptor M14x220mm 4 Fixed long reach adaptor M12x220mm 5 10 | 12 | 14 x 25mm adaptors 6 Adaptor hose for diesel injection adaptors 470mm long (300psi) 7 Adaptor hose for spark plug testing on petrol engines 670mm long (300psi) 8 Assortment of O rings | seals

Fault Detection • If the cylinder does not hold, it shows the air is leaking. By simply listening to various parts of the system, you should be able to identify the leaking component.

• Worn rings will allow air to seep into the crankcase and out of the oil filler or dipstick tube.

• Burnt exhaust valves will allow air to escape through the exhaust system.

• Burnt inlet valve will allow air to exit through the inlet manifold or air filter.

www.promeister.com

• Cracked cylinder head/block or blown head gasket will allow air to escape through the cooling system or under the cylinder head. (This is easier to identify of the coolant level is full to the top of the filler cap. Any leakage from the combustion chamber to cooling system will then cause coolant to overflow).

98

PT5371

Oljetryckstestare, 0-10 bar Specifications • Help to diagnose worn oil pumps and engines, faulty oil pressure switches and warning indicators.

• Accurately tests oil pump pressure, switch and warning indicators.

• Gauge range: 0~10 BAR, 0~140 PSI. • Permanently oil primed 2M flexible hose.

• Quick coupling adapters, with removable shut-off valve.

• Adapters × 11

Applications Alfa Romeo, American model vehicles, Audi, Austin, Autobianchi, BMW, British-Leyland, Chrysler, Citroën, DAF, Daihatsu, Fiat, Ford, General Motors, Honda, Hyundai, Isuzu, Jaguar, Lada, Lancia, Land Rover, MAN, Matra, Mazda, MB, Mercedes-Benz, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rover, Saab, Škoda, Subaru, Suzuki, Toyota, Vauxhall, Volvo, VW.

No. 01 02 03 04 05 06 07 08 09

Thread 1/8”-28PT 1/8”-27NPT 1/4”-18NPT 3/8”-20UNF 1/2”-20UNF M10x1.0 M12x1.5 M14x1.5 M16x1.5

10

M18x1.5

11 B

3/8”-24UNF 90° ELBOW Quick coupling adapters, with removable shut-off valve

C

www.promeister.com

• Angular adapters × 1

99

PT5372

Kompressions- & cylinderläckagetestare, bensin/diesel, 0-70 bar Introduction Up-to-date kit for compression testing on diesel vehicles. Contains 17 of the most common dummy glow plugs, covering 29 glow plug types, 33 manufactures and over 500 model / engine variants from 1999 to 2015. Also includes a set of injector adaptors if an alternative method of testing is required.

Specifications Glow Plug Adaptors: Alfa Romeo, Audi, BMW, Cadillac, Chrysler, Citroen, Dacia , Dodge, Fiat, Ford, Honda, Jaguar, Jeep, Lancia, Land Rover, Mazda, Mercedes, MG, Mini, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Rover, Saab, Skoda, Suzuki, Toyota, Vauxhall / Opel , Volvo, VW Gauge Pressure Range 0-70 bar (0-1000 psi)

www.promeister.com

Part No.

100

Description

01

Glow plug adaptor M12x1.25

06 12

Part No.

Description

A

Gauge and hose assembly (700psi)

Glow plug adaptor M10x1.25

B

Thread seal tape

Glow plug adaptor M10x1.0

C

Gauge & regulator assembly

13

Glow plug adaptor M9x1.0

D

Injector adaptor with spacer sleeves

14

Glow plug adaptor M10x1.0

E

Injector adaptor nozzle (16.9mm dia)

15

Glow plug adaptor M10x1.0

F

Injector adaptor nozzle (16.9/6.7mm dia)

16

Glow plug adaptor M8x1.0

G

Injector adaptor nozzle (20.6/13.7mm dia)

17

Glow plug adaptor M10x1.0

H

Injector adaptor nozzle (23.8/13.7mm dia)

18

Glow plug adaptor M10x1.0

I

Injector adaptor nozzle (23.8/5.8mm dia)

19

Glow plug adaptor M10x1.0

J

90° degree elbow

20

Glow plug adaptor M10x1.0

K

Injector adaptor clamp (52mm)

21

Glow plug adaptor M8x1.0

L

Injector adaptor clamp (64mm)

22

Glow plug adaptor M10x1.0

M

Injector adaptor clamp (73mm)

23

Glow plug adaptor M8x1.0

N

Plum blossom wrench

24

Glow plug adaptor M8x1.0

O

M10 spark plug thread adaptor

25

Glow plug adaptor M10x1.0

P

M12 spark plug thread adaptor

26

Glow plug adaptor M10x1.25

Q

M18 spark plug thread adaptor

27

Glow plug adaptor M10x1.25

R

Valve screwdriver

28

Glow plug adaptor M8x1.0

S

Spark plug connector hose adaptor

29

Glow plug adaptor M10x1.0

T

M12 spark plug thread adaptor (long reach)

30

Glow plug adaptor M8x1.0

U

M14 spark plug thread adaptor (long reach)

31

Glow plug adaptor M9x1.0

V

Diesel adaptor connector hose

32

Glow plug adaptor M8x1.0

PT5373

Vakuum & tryckpump Introduction The Vacuum Pump is accurate, robust and easy to use.

The unit consists of a pump-body, movable handle and a gauge which displays both vacuum (inhg / bar) and pressure (psi / bar). The gauge can be rotated for 360 degree.

Pressure and Vacuum modes can be selected via the mode selector as follows:

1﹒ For vacuum testing: Turn the valve to “IN”

2. For pressure testing: Turn the valve to “OUT”

Instructions Before condemning the engine management system for causing any particular problem, remember that the engine’s mechanical components must be in good condition for the engine to perform properly. A vacuum gauge can be used to check the mechanical condition of an engine, however it is not foolproof.

By connecting the pump to a manifold vacuum port( this must be the engine side of the throttle butterfly) with the T connectors provided, a wide array of diagnostic examinations can be conducted.

By examining the range of vacuum readings and the movement of the gauge needle in comparison to the pressure readings of a normal engine running at idle( typically steady and between 16 inhg~22 inhg), it is possible to diagnose a variety of faults* * This is by no means an exhaustive list of tests. The hand pump and adaptors can be used to test practically any component or system that requires proper sealing, vacuum or pressure to operate.

To Test Fuel Systems Professional vacuum / pressure diagnostic tool helps identify a variety of faults on vehicle systems including fuel, ignition, transmission, emission and air conditioning / heating. Set also includes reservoirs, hoses and adaptors for bleeding brake and clutch systems. By using the appropriate connector from the selection included in the kit, most vacuum pipes can be interrupted.

When bleeding diesel fuel systems, it is recommended that the reservoir pot is used. This creates a vacuum in the pot and the diesel fuel is drawn in. This may need to be completed a few times before the procedure is complete. Connect the pot and gauge between the fuel filter and distribution pump.

To Test Air Conditioning And Heating Systems Using the connectors provided, it is possible to interrupt the vacuum system of the heating / air con system to enable safe and precise operation of the heater direction flaps in the heater box.

Remove the main vacuum supply to the unit and replace with the vacuum / pressure tester. Select vacuum mode and apply a small amount of vacuum while observing the gauge pressure.

www.promeister.com

Using The Automotive Vacuum & Pressure Test Kit to Diagnose Engine Faults

101

PT8111

Multifunktionstestare Auto Specifications • • • • • • • •

Power Source: 12-24V DC System DC Voltage Measurement Range: 0-70V DC Current Measurement Range: 0-5A Frequency Measurement Range: 0-100KHz (Square Wave) Resistance Measurement Range: 0-200KΩ Working Temperature: 0-50°C Storage Temperature: -10-60°C Working Humidity: ≤ 85%

13

d.

e.

f.

12

1 2 3

www.promeister.com

4

102

5 6

7

Screen Illumination Polarity Indication Light Positive: Red Negative: Green Testing Probe Available to take off Power Providing Switch Mode Button a. Short Press: To switch the measurement function b. Long Press for 3 seconds: To switch on & off the illumination during voltage measurement. c. Long Press for 3 seconds: To switch between max & min voltage value and frequency measurement during AC measurement.

Fuse Box Cap Open it to change the fuse

8

9 10 11 12

13

Fuse Fixed auto-recover fuse is 5A, replaceable fuse can be any The tester will use the smallest value to protect the circuit For example, if Fixed auto-recover fuse is 5A, and replaceable fuse is 10A, the current limitation will be 5A. If Fixed auto-recover fuse is 5A, and replaceable fuse is 1A, the current limitation will be 1A. Power Clips Cigarette Lighter Plug Auxiliary Ground Connector Accessory d. Connector e. Wire Piercing Probe f. Long Testing Probe 6m Extension Cable (Optional)

PT8112

Bromsvätsketestare, kokpunkt Features This tester can measure the boil point of the brake fluid. It can measure the wet boiling temperature of the brake fluid for technician as a reference for maintenance. It can be the reference when technician is going to change the brake fluid.

Besides the brake fluid, user can also measure the temperature of other fluid by connecting the tester with K-type thermocouple.

Press and hold

12V

Minimal brake fluid volume position Testing oil must exceed this line.

Specifications

7 11

5

4

6

9

3 8

1 2 3 4 5 6 7 8 9 10 11

10

Brake fluid cycle path Minimal brake fluid volume position 1 Illumination Start button (Press and hold this button for testing) °C / °F Switch; Press Instantly: °C / °F Unit Switch Press & Hold: Switch between Thermocouple / Brake Fluid Testing Probe SAVE Switch; Press Instantly: Read Five Recently Saved Brake Fluid Boiling Temperature Press & Hold: Save Current Brake Fluid Boiling Temperature LCD Power clip (Red to positive, black to negative) Brake fluid pipet Measuring cup K-type thermocouple socket

www.promeister.com

2

103

PT8113

Digital testpenna Features • Digital display to read the accurate voltage value.

• Available for 6, 12, 24 & 48VDC system.

• LED indication for power (Red) and ground (Green).

• Stainless steel testing probe.

• Spring cable, which is able to extend to 3 meter.

• Small testing current < 10mA.

Specifications • • • • •

www.promeister.com

• • • •

104

Voltage measurement from 4-60 VDC Testing Current: <10mA Display: LCD Resolution: 0.1V Accuracy: 4 – 10V ± (1% + 5digits) 10 – 60V ±(1% + 3digits) LED Indication: Green (-) / Red (+) Cable Length: Spring Cable, max 3m Operating Temperature: -10 – 50°C Operating Humidity: <80%

PT8114

Injektortestare, 12V Features By connecting with the 12V battery, the tester generate four different output signal pulses for user to check the condition of the injector. By using the tester, user can check if the injector is clogged, leaking, or blasting.

1 Black Battery Clip (Connecting with negative pole of the battery) 2 Red Battery Clip (Connecting with positive pole of the battery) 3 Output Signal Connector (Connecting with the injector) 4 Mode Indicator 5 Pulse Indicator 6 Pulse Switch 7 Mode Setting Switch

Specifications 1. Input Power: 12V Vehicle Battery 2. Working Environment: 0~40°C (32~104°F); <80%RH 3. Storage Environment: -10~50°C (14~122°F); <85%RH

Connector Terminal

Size

0.64mm

2.00mm

2.50mm

Operations

Mode 1: Press “PULSE” switch to generate 1 pulse; the width of the pulse is 250ms.

Mode 2: Press “PULSE” switch to generate 50 pulses; the width of the pulse is 8ms.

Mode 3: Press “PULSE” switch to generate 100 pulses; the width of the pulse is 4ms.

Mode 4: Press “PULSE” switch to generate 50 pulse every 1500ms continuously; the width of the pulse is 8ms. Press “PULSE” switch again will stop the signal.

4. After selecting the pulse mode, press the switch “PULSE” to generate the pulse. The “Pulse Indicator” will light up as the signal is generating.

www.promeister.com

1. Switch off the engine, then connect the black battery clip to the negative of the car battery, and the red battery clip to the positive of the car battery.

2. Disconnect the injector with connector from the vehicle; then connect the “Output Signal Connector” with the injector.

3. Press “Mode SET“ switch to select the output signal pulse mode; there are 4 modes of the pulse:

105

PT8115

Multimeter, avancerad Features This is a low power consumption, high accuracy and stable hand held 6000 counts multimeter; with special designed IC to support true RMS measurement. It performs measurements of DC voltage/current, true RMS AC voltage/current, resistance, capacitance, frequency, diode, continuity, temperature and non-contact voltage sensing.

Specifications

1

2 3

4 1 2 3

5

7

6 8

b c d e f

g h i

p q www.promeister.com

8 9

9

a

106

4 5 6 7

r

j k o

n

m

l

LCD Display Function Switches Short press for value holding Long press for background light Hz Rotation Switch for Measured Function 10A Current Measured Terminal Measured Terminal of Voltage, Resistance, Capacitance, Frequency, Temperature, Continuity and Diode <600mA Current Measured Terminal Common Ground Terminal (COM)

PANEL DESCRIPTION a Auto Range b Relative Value Measurement c Auto Power-off d Diode Measurement e Continuity Measurement f HOLD g Low Battery Power Indication h Non-Contact Voltage Sensing i Temperature Units j Duty Cycle Unit k Other Units l Minimum Indication m Maximum Indication n Measured Value o Bluetooth on/off flag (This only works for 7117A) p DC Indication q Negative Polarity Indication r AC Indication

HJUL- OCH DÄCKVERKTYG (TYRE AND RIM TOOLS)

PT5120

Hjulnavsslip inkl. slipskiva Features • For cleaning the wheel centering device as well as the attachment area between the wheel and hub.

• Corrosion between the rim and the wheel hub is removed and torque values can no longer be distorted.

1/2” Dr.

Specifications • Inner: ø90mm • Outer: ø150mm • Max Speed: 1,500rpm

www.promeister.com

1/2”-1/4” adapter included

108

AFTER BEFORE

PT5258

Monteringsdorn för hjul, 5 delar Features • Wheel hangers for hanging tires while changing tires - a great helper during tirechanging seasons.

• Also for stabilizing brake discs, preventing brake caliper from wobbling.

• Insert the wheel alignment guide tool on the wheel bolt hole first and hang the wheel and tire without needing to hold the tire in mid air and look for the wheel bolt hole.

• This series includes different sizes for different vehicle makes.

Specifications • • • •

Overall length: 150mm/5.9” Material: S45C Steel Surface treatment: Chrome plating blue baking (M14 x P1.25 only) Hardness: HRC 38-43

For M12 x P1.50 wheel nuts Hex 10mm Tighten this tool on wheel stud with a spanner

Can insert a screwdriver or bar to install/remove a wheel hanger

www.promeister.com

For wheel bolts in M12 x 1.50, M14 x P1.25 M14 x 1.50, M16 x 1.50

Before mounting wheel, screw the wheel alignment guide tool or wheel hanger on the wheel bolt or wheel stud, and then wheel can be hung on the tool.

109

HJULLAGER-, DRIVKNUT OCH BUSSNINGSVERKTYG (WHEEL BEARING, DRIVE SHAFT, AND DRIVE BUSH TOOLS)

PT5210

Bussnings- & lagerverktyg Universal Features • Universal application of step discs fit various types of vehicles • Easy work to remove and install - Bearing Bushing - Silent Bushing - Hydraulic Bearing - Rubber Bearing • Step discs are two-sided. Each side has track for fitting sleeves provided (Feature 1). A time-saving and spacesaving design.

• Each sleeve has a window (as the squares in Feature 2) for observing the process of bushing or bearing removal/ installation, preventing bushing or bearing overworks.

• Spindle nuts are equipped with bearings (Feature 3), reducing friction and saving energy, • Spindles are square threaded (Feature 4), featuring it’s strength and durability.

Specifications D

D

D

M

M

M

H

H

H

F

F

F

S

S

S

D M D

H

M

F

H

S

S

D M H F

www.promeister.com

F

S

111

PT5218

Hjullagerverktyg, GEN2, 62mm Specifications

3

5

1

2

6

4 9

8 7

No.

1

2

3

4

5

6

7

8

9

Description

Pressure Plate

Installing Back-Up Ring

Removal Back-Up Ring

Spindle

Removal Centering Bushing

Installing Centering Bushing

Screw M8x35L

Forcing Bolt

Spindle Nut

Qty

1

1

1

1

1

1

2

5

1

Applications

www.promeister.com

Wheel hub removal with the help of: • Workshop press • Spindle (4) and spindle nut (9) • Spindle (4) and spindle nut (9) with clamp

112

Wheel hub installation with the help of: • Workshop press Installation of wheel bearing on wheel hub with the help of: • Threaded spindle (4) and spindle nut (9) *Refer to the user manual for detailed applications.

PT5219

Hjullagerverktyg, GEN2, 66mm Specifications

3

5

1

2

6

4 9

8 7

No.

1

2

3

4

5

6

7

Description

Pressure Plate

Installing Back-Up Ring

Removal Back-Up Ring

Spindle

Removal Centering Bushing

Installing Centering Bushing

Screw M8x35L

Qty

1

1

1

1

1

1

2

8

9

Forcing Bolt Spindle Nut 5

1

Applications

Wheel hub installation with the help of: • Workshop press Installation of wheel bearing on wheel hub with the help of: • Threaded spindle (4) and spindle nut (9) *Refer to the user manual for detailed applications.

www.promeister.com

Wheel hub removal with the help of: • Workshop press • Spindle (4) and spindle nut (9) • Spindle (4) and spindle nut (9) with clamp

113

PT5220

Hjullagerverktyg Specifications

2

3

7 4 6

5

1

8

9

No.

1

2

3

4

5

6

7

Description

Pressure Plate

Installing Back-Up Ring

Removal Back-Up Ring

Spindle

Removal Centering Bushing

Installing Centering Bushing

Screw M8x35L

Qty

1

1

1

1

1

1

2

Applications

www.promeister.com

Wheel hub removal with the help of: • Workshop press • Spindle (4) and spindle nut (9) • Spindle (4) and spindle nut (9) with clamp

114

Wheel hub installation with the help of: • Workshop press Installation of wheel bearing on wheel hub with the help of: • Threaded spindle (4) and spindle nut (9) *Refer to the user manual for detailed applications.

8

9

Forcing Bolt Spindle Nut 5

1

PT5221

Hjullagerverktyg, GEN2, 78mm Specifications

9

4

8 5

3

2

1 6

7

No.

1

2

3

4

5

6

7

Description

Pressure Plate

Installing Back-Up Ring

Removal Back-Up Ring

Spindle

Installing Centering Bushing

Removal Centering Bushing

Screw M8x35L

Qty

1

1

1

1

1

1

2

8

9

Forcing Bolt Spindle Nut 4

1

Applications

Wheel hub installation with the help of: • Workshop press Installation of wheel bearing on wheel hub with the help of: • Threaded spindle (4) and spindle nut (9) *Refer to the user manual for detailed applications.

www.promeister.com

Wheel hub removal with the help of: • Workshop press • Spindle (4) and spindle nut (9) • Spindle (4) and spindle nut (9) with clamp

115

PT5228

Hjullagerverktyg, GEN2, 82mm Specifications

4

9 8

5 2

3

1 6 8-1

7

No.

1

2

3

4

5

6

7

8

8-1

9

Description

Pressure Plate

Removal Back-Up Ring

Installing Back-Up Ring

Spindle

Installing Centering Bushing

Removal Centering Bushing

Screw M8x35L

Forcing Bolt 100L

Forcing Bolt 76L

Spindle Nut

Qty

1

1

1

1

1

1

2

4

4

1

Applications

www.promeister.com

Wheel hub removal with the help of: • Workshop press • Spindle (4) and spindle nut (9) • Spindle (4) and spindle nut (9) with clamp

116

Wheel hub installation with the help of: • Workshop press Installation of wheel bearing on wheel hub with the help of: • Threaded spindle (4) and spindle nut (9) *Refer to the user manual for detailed applications.

PT5229

Hjullagerverktyg, GEN2, 85mm Specifications

3

10 5

2

1 6

8

4

9

8

7

No.

1

2

3

4

5

6

7

8

9

10

Description

Pressure Plate

Installing Back-Up Ring

Removal Back-Up Ring

Spindle

Installing Centering Bushing

Removal Centering Bushing

Screw M8x35L

Forcing Bolt

Spindle Nut

VW T 5 Sleeve

Qty

1

1

1

1

1

1

2

5

1

1

Applications

Wheel hub installation with the help of: • Workshop press Installation of wheel bearing on wheel hub with the help of: • Threaded spindle (4) and spindle nut (9) *Refer to the user manual for detailed applications.

www.promeister.com

Wheel hub removal with the help of: • Workshop press • Spindle (4) and spindle nut (9) • Spindle (4) and spindle nut (9) with clamp

117

PT5230

Hjullagerverktyg, GEN2, 72, 78 & 82mm Specifications

2

2

3

6

3

2 5 3 1 4

No.

7

8

9

1

2

3

4

5

6

7

8

9

Description

Pressure Plate

Removal Back-Up Ring

Installing Back-Up Ring

Spindle

Removal Centering Bushing

Installing Centering Bushing

Screw M8x35L

Forcing Bolt

Spindle Nut

Qty

1

3

3

1

3

3

4

9

1

Applications

www.promeister.com

Wheel hub removal with the help of: • Workshop press • Spindle (4) and spindle nut (9) • Spindle (4) and spindle nut (9) with clamp

118

Wheel hub installation with the help of: • Workshop press Installation of wheel bearing on wheel hub with the help of: • Threaded spindle (4) and spindle nut (9) *Refer to the user manual for detailed applications.

PT5235

Bussningsverktyg Volvo/Ford, bak Features • For dismounting and mounting of the rear trailing arm bush.

• On car solution - no changing of the entire trailing arm necessary.

Specifications FORD

VOLVO

Mondeo 2007~ Mondeo Turnier 2000-2007

V60 2010~ XC60 2010~

S-Max 2006~

V70 2007~ XC70 2007~

Galaxy 2006~

S60 2010~

How To Use Mounting

www.promeister.com

Dismounting

119

PT5240

Mothållsverktyg, hjulnav Features • Can also be used to hold rear differential yoke on solid axle vehicles during pinion seal or bearing service, as well as many other types of machines with drive shafts, yokes and universal joints.

• Used to hold the wheel hub in place while the axle nut is removed / installed or wheel bearing service.

• 1/2” square drive for breaker / extension bar.

1/2” Dr.

www.promeister.com

• Works on vehicles with wheel stud bolt patterns ranging from 4 x 100mm (3.937”) to 8 x 170.3mm (6.704”).

120

PT5252

Damaskverktyg CV, pneumatiskt Features • This CV boot fitting tool is designed for stretching flexible CV Boots onto the drive shaft assemblies without the need to remove the CV joint. The tool works with an air compressor at 5-8 bar & on a maximum diameter of 110mm • Designed for stretching flexible CV boots on to the drive shaft assemblies of automotive vehicles.

• For use with an air compressor.

Standard 1/4” BSP connection.

• Works at 72-113psi (5-8 bar); CV joint diameter: 25-110mm.

• Allows the boot to be fitted without removal of the CV joint saving significant time.

Specifications • CV joint diameter: • Weight:

25-110mm 2.2kg

• Working pressure: 5-8bar (72-113psi) • Air inlet size:

1/4” BSP

Instructions 1. Put the CV boot on the front jaws.

Ensure that the jaws hold the CV boots firmly.

2. Press & hold the pressure switch (+) to open the front jaws wide enough to fit over the joint.

3. Put the CV boot into the CV joint, then press the release switch (-) to release the CV boot onto the CV joint.

www.promeister.com

4. Slowly remove the tool, leaving the CV boot in place.

121

PT5253

Drivknutsavdragare CVJ Features • For Removing the CV joints on frontwheel drive cars.

• No need to remove the entire drive axle from the vehicle • No need to use a hammer - avoid damage to drive axle.

Instructions • Lose the nut of the drive shaft.

• Put the CV joint puller over the drive shaft.

• Fix the CV joint puller with the traverse.

• Mount the nut of the drive shaft and actuate it with a suitable tool, until you separate the joint from the drive shaft.

www.promeister.com

Ø max 31.5mm

122

Adjusting range 135mm

PT5260

Hjullagerverktyg Ford Transit, 17 delar Features • This kit has been developed to remove the front wheel bearing housing from the front drive flange. The front bearings are integral of their outer housing and due to their design are rendered unserviceable when separated from the drive flange.

H

• This tool kit separates the old bearing from the drive flange to allow the bearing to be replaced without having to replace the drive flange.

E I

• Once the outer bearing housing has been removed, the outer inner bearing race ring must be removed. For this task additional equipment is required.

Materials F

S45C+ Cr-Mo Black finish

Specifications Puller Body Holding Wrench

B

Puller Body

C

Large Impact Boss

D

Small Impact Boss

E

Fixing bolts/Nuts/Washer (M10) x 5

F

Impact Force Screw

G

Clamp Shells x 2

H

Puller legs x 3, sleeves x 3

I

Fixing Bolts x 2

J

30mm Socket

A D

B G

J

C

Component Descriptions Component A - Puller body holding wrench Designed to hold the puller body steady whilst tightening the Impact Force Screw.

Component B - Bearing Puller Body Designed specifically to bolt to the wheel bearing housing using the 5 nuts and bolts supplied. The centre thread of (B) is specifically sized to fit the Impact Force Screw (F) provided but any mechanical or hydraulic centre screw equipped with a 11/2” could be used.

Components C – Large Impact Boss Used to protect the bearing and drive flange when removing them as an assembly from the suspension leg.

Component D – Small Impact Boss Used to protect the drive flange tube when removing the bearing from the flange.

Component E – Nuts, bolts and Washers Used to connect the wheel bearing housing to the puller body (B). These items are consumable – Spare part numbers.

Component F – Impact Force Screw A threaded tube with a large Hex at one end and a solid metal bar up the middle. By tightening the threaded body down into the centre of the Puller body (B) the centre bar of (F) will push against the drive flange. Once tight simply hit the outer end of the centre bar with a copper mallet. This hammer strike will deliver a direct shock to the joint being separated. Hit twice and re-tighten (F) then repeat till the bearing has separated.

www.promeister.com

A

123

PT5355

Oljepluggsverktyg, gängrepsats, 64 delar Specifications

www.promeister.com

• Adjust Range A (mm) 20-95 • Bearing Range 6004-6010 6201-6206 6300-6304 • Jaw Size φ 6/8 5.5 / 6/8 6/8

124

PT5356

Kullagerverktyg, demontering, 10 delar Application • Two versatile gear and bearing splitter sets • Dropped forged and hardened • Size range: 30-50mm and 50-75mm

Specifications

www.promeister.com

• Extension rods and carbon steel yokes • Main rod x 4 Pcs • Hex Bar 17mm 3/8”Dr x L125mm x 16t • Extension rod x 4 Pcs • Hex Bar 14mm 3/8”Dr x L110mm x 16t • Centre Bolt x 1 Pc • 5/8” x L175mm x 18t/inch Carbon Steel • Carbon Steel Beam x 1 Pc

125

PT5607

Drivknutsklammetång CV Features

www.promeister.com

• Designed to crimp the ear-type CV boot clamps used on frontwheel drive vehicles.

• May also be used to crimp the type of clamps used on fuel and cooling system hoses.

126

PT5609

Drivknutsklammertång CV, öronlösa klammer Features

www.promeister.com

• Special tips for the earless-type clamps on axle collars, water and fuel hoses (including those found on GM inboard CV joints).

• Grips clamp in many positions to tighten clamp around boot.

• Universal application, for VWAudi, Mercedes, Toyota, etc.

127

PT5610

Drivknutsklammertång för momentdragning Features • For fitting the high strength stainless steel clamps on modern vehicles where a torque setting is specified. (23-30 Nm typically) • The two way jaws are designed to work in hard to reach areas.

• Suitable for VAG, Opel, Vauxhall, Ford, etc.

3/8” Dr.

www.promeister.com

Straight

128

Angled

ÖVRIGT (OTHERS)

PT5127

Sugkopp för glasdetaljer Features • Plastic suction cup prevents damage to surface.

• Designed for handling glass, tiles, plastics, sheet metals, and other non-porous materials.

• 55mm diameter suitable for small surfaces.

Specifications

www.promeister.com

• Weight: 49g • Diameter: 63x80x55mm • Main body: Plastic

130

PT5251

Skrapset komposit, 4 delar Features • Works like a chisel.

• Tough plastic handle can be hit with a hammer.

• Resharpen when needed with a file.

19mm

22mm

25mm

www.promeister.com

28mm

131

PT5315

Packboxserviceverktyg, 6 delar Features • Set for pulling off seals, O-rings or tiny parts • Includes a crankshaft seal puller for removing seals on crankshaft pulley by leverage force • Special tip angle provides a wide application • No space limitation

www.promeister.com

Specifications

132

No

Diameter

Overall Length

Description

1

6 mm

193mm

Offset 93.5°

2

Ø 8 mm

210mm

Offset 100°

3

9 mm

285mm

Offset 110

4

Ø 3.5 mm

150mm

5

Ø 6 mm

115mm

6

Ø 8 mm

193mm

PT56008

Tång för demontering av avgasrörsgummi Features • Tool for removing exhaust pipe hangers • Adjustable head pin provides a wide application • Large body length 367mm / 14.5 in offers extra leverage for an energy-saving operation

Specifications • • • • •

Overall Length: 367mm / 14-1/2” Handle Material: SPCC PO Handle Surface: Blackening Adjustable Head Material: S45C Steel Adjustable Head Surface: Blackening

Large Handle Adjustable Head

Instructions fig 1

fig 2

www.promeister.com

1. Target the tip on the exhaust pipe hanger holder (fig 1).

2. Push the handles towards each other to take out the exhaust pipe hanger (fig 2).

133

PT5601

Glödlampsverktyg Features

www.promeister.com

Works on a vast array of miniature style bulbs commonly used in automobiles, boats, airplanes, pinballs, arcade / video games, vending machines, coin-op equipment and a multitude of electronic devices.

• Great tool for those hard to reach bulb locations.

• Safely removes bulbs, fits where fingers can’t.

• Cup-type ends create circular gripping area.

• Rubber coated gripping area for secure and safe use

134

Bayonet

Screw

Wedge

PT5604

Relätång Features

www.promeister.com

• Pliers for removing electrical relays on most vehicles.

• Offset handle and thin tips allow access to relays in confined areas.

• Specially designed tips are angled to fit slots or edge of relay cover.

135

PT5606

Slangdemonteringstång för vacuumslangar Features • Simplifies the removal of 4mm - 13mm (5/32” - 1/2”) vacuum and fuel hoses.

Instructions

www.promeister.com

1. Engage the tube with the black jaw to grip it.

2. Squeeze the handles and the hose will be easily pushed off by the silver jaw.

136

PT5611

Slangklammertång lång, plåtklämmor Features • Long reach pliers to access to limited spaces easily (fig1) • Special crossing grooves enable pliers to work from different directions.

• Offset design allows pliers to reach awkward locations

Specifications

1. Locate the hose clamp to be removed or adjusted.

2. Use the crossing grooves on the pliershead to frip the hose clamp (fig2) for removall or adjustment.

www.promeister.com

Instructions

137

PT5705

Dörrhandtagsverktyg VAG Features • Used for removal and installation of the exterior door handle.

• Suitable for VW : Arteon 2017 >, Atlas 2017 >, Caddy 2016 >, Golf Sportsvan 2015 >, Passat 2015 >, Polo 2017 >, Tiguan 2016 >, Touran 2016 >.

Audi : Q2 2016 >.

Instructions

90o

www.promeister.com

1

138

2

3

PT5901

Värmefläktsverktyg, Volvo, demontering & montering Land Rover • Freelander 2 / LR2 (2006 ~ 2014), Range Rover Evoque (2008~)

Volvo • S60 (2011~), S60 Cross Country, S60L, S80 (2007~), S80L, V60, V60 Cross Country, V70 (2008~), XC60, XC70 (2008~)

• OEM Ref. Volvo 9997284 / Land Rover 412-140

Removing

• Press the locking tap • Install the tool assembly

• Turn the tool anti-clockwise and then take out the blower motor from the house

www.promeister.com

Installing

• Install the tool assembly

• Push the blower motor into the housing and then turn the tool clockwise

139

PT5930

Torkararmsverktyg VAG Features

www.promeister.com

• The puller is specially designed for the rear wiper arm shaft with washer nozzle.

• Suitable for VW, Audi, Škoda, Seat, etc.

140

3/8” Dr. 13 mm

PT5931

Torkararmsverktyg Universal Features • A dual-purpose puller.

• Easily removes windshield wiper arm and battery terminal.

• Can be easily positioned due to its self-gripping spring mechanism.

For Battery Terminal

www.promeister.com

For Windshield Wiper Arm

141

PT5933

Bult/skruv/mutterutdragarsats för skadade bultar och muttrar, 21 delar Features • Twist sockets for removing worn or rusty nuts • Includes a punch bar to punch stuck bolts/nuts out of socket • For removal only. Do not use twist sockets to install new nuts • Product NOT designed for air/ impact wrench operation

Specifications Square Drive (D)

1/2” Drive

Size (S) (mm)

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

24

27

Length (L) (mm)

38

Material

SNCM 439

Surface Treatment

Manganese Phosphate

Hardness

HRC 50-53

Instructions

www.promeister.com

1. Choose a suitable-sized twist socket and fit it to the nut to be removed (fig 1&2).

2. Connect the ratchet wrench or spanner to the socket and turn it counter-clockwise (fig 3).

3. The nut maybe stuck in the socket after removal. Use a punch bar provided and a hammer to punch the stuck nut out of the twist socket (fig 4, 5, and 6).

142

fig 1

fig 2

fig 3

fig 4

fig 5

fig 6

PT5935

Hålstansverktyg för backvarnarsensorer, 8 delar Specifications • Punch Tools: 7 Pcs (17, 18, 19, 20, 21, 22, 32mm) • 5/16 Drill Bit: 1 Pc

Instructions

Remove the bumper off the car.

4

7

2

5

After the bumper is cut, remove the tool and discard the plastic parts inside.

Drill a hole using an 8mm drill on the place where you want to position the sensor. And use the hole to guide the M8 screw in.

3

6

Remove the screw from the tool. Install both parts on the opposite side of the bumper and put back the screw.

The same operation can be done with a simple battery powered screwdriver.

www.promeister.com

1

143

PT5944

Gummiklubba soft Features • Mallet with special rubber filler that is elastic in nature, but hard when in use • For pushing in and fixing vehicle door weatherstrips, fender flares, and bumpers • Avoid scratching and damaging bumpers, panels, and car body in general

Specifications

2

1. Hex bumping head Hex shape is able to distribute force evenly 2. Ergonomic handle Sturdy and bent upward handle prevents hand to be hurt while bumping

3 1

3. Special rubber filling The special material is permanently elastic, but becomes hard when being pounded

Instructions This special mallet helps snap the door weatherstrip into the channel (Fig 1). It can be especially useful if the weatherstrip has metal reinforcement because pushing with thumbs can be an effortful task. This mallet can also be used on pushing bumpers (Fig 2) and fender flares (Fig 3) in place. www.promeister.com

Fig 1

144

Fig 2

Fig 3

PT5945

Bräckjärn 915mm, böjd Features For heavy duty application: • Dismantling stubborn components • Positioning and holding components • Spreading clamping bore • Checking suspension - ball joint, bearing, bushing, tie rod, etc.

PT5946

Bräckjärn 915mm, rak Features For heavy duty application: • Dismantling stubborn components • Positioning and holding components • Spreading clamping bore • Checking suspension - ball joint, bearing, bushing, tie rod, etc.

PT5947

Bräckjärn 1524mm, rak Features

www.promeister.com

For heavy duty application: • Dismantling stubborn components • Positioning and holding components • Spreading clamping bore • Checking suspension - ball joint, bearing, bushing, tie rod, etc.

145

PT5969

Karroserikilar, 5 delar Features

Specifications

Five plastic wedges are particularly suitable for car body work such as the removal and installation of trim strips, door trims, door clips, etc.

1 2 3 4

Combination wedge Plastic wedge with felt Plastic wedge with straight and sloping tip Plastic wedge, angled, with cutout and pin (for door clips) Plastic wedge

5

www.promeister.com

1

146

2

3

4

5

PT5970

Karrosserikil XL med handtag Features The tool with 3” non-marring blade allows the technician to remove body side moldings and emblems quick and clean.

www.promeister.com

• Durable plastic handle can be hit with a hammer.

• Won’t mark or scratch vehicle finish.

• Also for the basic opening of car door for insertion of lock out tools.

147

Produced for Bileko Car Parts AB P.O. Box 542 S-645 25 Strängnäs, Sweden Tel: +46 771 72 00 00 | www.promeister.com

Images are for illustration purposes only.