WUP 2020 / 21 Drawing 3D CAD 1 and 2 Move!
Sol-Air is a wearable device on the shoulders that allows to produce energy in an eco-friendly way using solar rays. The system filters the air and reuses it in a clean and purified way like a portable fan and is also a way to always have a charger on hand. It is ideal for those who practice outdoor sports, but also for a walk in the city on a sunny day.
Martina Macor SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Move! How it works
Solar Energy Ecological power production and storage Air filtering and purification Outflow of clean and fresh air Cooling system Solar panels Eco-friendly production of energy that enables product functionality and is stored in batteries to recharge other devices.
Fan and secondary filters Part resting on the shoulders that works as a fan. Filters ensure clean air.
Batteries Inside the back part there are two batteries from which the cables carrying the current to run the system start.
Main filter Purifies incoming air captured by the impellers.
Impellers They are one on each side of the fan and are powered by batteries. They collect air and move it, cooling it, so that it can be pushed out of the fan clean and fresh.
Cooling system Part in direct contact with the back that transpires to allow the heat generated by the batteries and solar panels to disperse.
Martina Macor SS 2021
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Move!
a
b
a. Power button b. USB port c. Speed button
c Technical drawings
290.94 87.75
299.54
353.24
116.64
37.20
150.42
68.74
374.55
95.54 195.28 Scale 1:2
Top view 349.51 Scale 1:2
Front view
373.40
146.63 29.35
14.24
200.00
243.73
290.97
14.17 Scale 1:2
Back view
Martina Macor SS 2021
Scale 1:2
Right view
29.03
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Move!
Components Shoulder Fan 1 Metal plate, decoration of the shoulder part 2 Body of the shoulder fan 3 Internal cable routing 4 Lower soft covering of shoulder fan 5 Filter cap 6 Main filter 7 Filter Base 8 Secondary filters on fan side 9 Screws 10 Impeller 11 Impeller Base Backplate 12 Solar Panels 13 Base plate for solar panels 14 Dividing aluminum plate 15 Soft base of cooling system 16 Cooling system holes 17 Battery 18 Battery case 19 Screws 20 Electrical Cables 21 Frame board and limit
5
1
6 2
7 8 9 3
10 11
4
Shoulder Fan
20 19
21
18
17
12
16
Martina Macor SS 2021
15
Backplate 14
13
WUP 2020 / 21 Drawing 3D CAD 1 and 2 Move!
Solar panel distribution
Composition of the cooling system
Secondary shoulder fan filters
Decorative pattern of filter cap surface
Martina Macor SS 2021