International Research Journal of Engineering and Technology (IRJET)
e-ISSN: 2395-0056
Volume: 08 Issue: 10 | Oct 2021
p-ISSN: 2395-0072
www.irjet.net
Design and Manufacturing of Stapler Body Aashay Sharad Ingle1, Sudarshan Manik Lahane2 1,2UG
Students Department of Mechanical Engineering, Viva Institute of Technology, Vasai-Virar, Maharashtra401305, India ---------------------------------------------------------------------***---------------------------------------------------------------------Abstract - A stapler is most commonly used in day-to-day life. A stapler is made up of plastic, stainless steel and zinc plated steel. These are most commonly material used to manufacture stapler. In this project, we are created stapler body die. Because of most stapler are made in china, for Indian manufacturers we going to design and manufacture stapler body die for stapler body. In this project, we are making progressive die for stapler body, which will easily to manufacture, and due to using standard assembly parts, it is easy to replace for maintenance. Key Words: Tool Design, Strip Layout, Tonnage Calculation, Stapler Body Design, Final Assembly, Math 1. INTRODUCTION Tool Design is a specialized phase of tool Engineering Tool - design function may be performed by a tool Engineer in addition to these other duties in manufacturing, or they may be performed by a tool design specialist who devotes his entire working time to tool design the word "tooling refers to the handwork necessary to produce a particular product considerable amount of tooling is the result of work performed by the tool designer Tooling as viewed by the tool designer, consist of a vast array of Cutting device, jigs fixtures, dies, gauge, etc. used in normal production 1] Sheet-metal press working dies you all types of Sheet metal fabrication 2] Die Casting 3] Plastic molds 4] Forging die Progressive Die: The progressive die is used to perform two or more operations at different stages at one time. Every time the Ram descend, the stock strip is advanced through a series of stations that perform one or more distinct die operations on the work piece. Thereafter a complete work piece is produced with each stroke of the ram. 2. Literature Review
Fig -1: Strip Layout Strip Layout: In this strip layout, there are six-station where different types of operations are performed and they are as follows
© 2021, IRJET
|
Impact Factor value: 7.529
|
ISO 9001:2008 Certified Journal
|
Page 1702