ICT | Product Showcase CLEANING SYSTEMS
acp – advanced clean production GmbH
Dry cleaning with CO2 snow after machining and forming Inevitably, machined and stamped parts are contaminated during manufacturing operations. As these residues usually interfere with downstream processes such as joining (welding and adhesive bonding), or assembly and optical gauging, they have to be removed.
The sufficient cleanliness can be achieved by using the environmentally-friendly quattroClean CO2 snow jet technology from acp in a dry, reliable and cost-efficient way. The consistently reliable and repeatable cleaning effect of this system is based on four active mechanisms that
remove particulates (e.g. swarf, flaky burrs) and film-like contaminants (e.g. residues of processing oils, coolant, finger prints) from the entire surface or defined area. The spacesaving and Industry 4.0 compliant cleaning system is equipped with nonwearing two-component ring nozzle technology. It is suitable for manual to fully-automated cleaning applications in single part or series production, and is simple to automate. ‹
acp – advanced clean production GmbH, 71254 Ditzingen, Germany, Phone +49 7156 480140, www.acp-micron.com Hall 5, Stand E40
but it also significantly reduces the contamination of parts and machine tooling. In many cases, the subsequent cleaning of workpieces can be entirely omitted; or, if additional post-cleaning is required, a separate cleaning module can be integrated, quickly and effectively. ‹
acp – advanced clean production GmbH, 71254 Ditzingen, Germany, Phone +49 7156 480140, www.acp-micron.com Hall 5, Stand E40
cleaning baths. The customertailored transducers are attached to the side walls or the bottom of a tub and supply the entire tub with an intensively cleaning cavitation field. The maximum ultrasonic power per generator is 1,500 watts. ‹
BANDELIN electronic GmbH & Co. KG 12207 Berlin, Germany, Phone +49 30 768800, www.bandelin.com Hall 3, Stand C52
CLEANING SYSTEMS
acp – advanced clean production GmbH
Simultaneous cooling, lubricating and cleaning with CO2 snow The dry and reliable quattroClean CO2 snow-jet technology from acp, has been a well understood and proven cleaning method for many years. This technology is being met with growing interest as an alternative to classical cooling strategies in precision machining. Here, the
quattroClean technology with its non-wearing dual-component ring nozzle, is used to simultaneously lubricate, and cool workpieces made from aluminium and plastic, such as PEEK, during machining. The result is that it not only improves productivity by about one third,
ULTRASOUND CLEANING
BANDELIN electronic GmbH & Co. KG
The world’s first waterproof ultrasound generator The world’s first IP67 ultrasound generator enables the hermetic encapsulation of all electronic components and prevents the soiling of the internal parts. The waste heat generated in the housing is discharged to the environment in a highly effective
68
manner via new, external cooling ribs. Thus, the SG generator can be operated without restrictions both in damp rooms and in the open air. In combination with a fully water-tight immersible transducer, the generator provides a heavy duty retrofit solution for existing
N. 12 - 2017 OCTOBER - ipcm® Industrial Cleaning Technologies