INNOVATIONS: PRESENT&FUTURE
Bright yellow High gloss
Pure white
Graphite black RAL 9011
Green John Deere JDMF9A
Blue New Holland 86593620
1
© Inver-Valspar
1
The result of the neutral salt spray tests (ASTM B117 – D1654) with INVERPUR 2K DTM after 300 hours. Substrate: pre-treated steel, 60-80 μm DFT. Il risultato delle prove in nebbia salina neutra (ASTM B117 – D1654) con INVERPUR 2K DTM dopo 300 ore. Substrato: acciaio pretrattato, 60-80 μm DFT.
directly on the substrate (after pre-treatment) and they combine the characteristics of primers and lacquers in just one product. The obvious benefit is that there is no longer any need to apply two coats of paint (primer + lacquer), thus reducing the number of products to be stocked, eliminating a flash-off stage and therefore lowering the production times. The main limitation encountered so far in the development of waterborne DTM coatings has been the need to combine anti-corrosive properties with a look that meets the high standards imposed by the heavy machinery market. In fact, this sector often require values higher than 90 gloss (at 60°). In the last few months, Inver-Valspar’s laboratory located in Minerbio (Italy) has been developing an innovative system based on waterborne two-component polyurethane resins, called INVERPUR 2K DTM. The lab has tested new resins and additives starting from the proven Inverpur system, now used for decades by all major customers in the field of construction, agricultural and transport machines as well as in the general industry. The aim was to find the right combination to obtain a high-performance hardener, but also a perfect formulation under all
vio pretrattamento dello stesso, e combinano nello stesso prodotto le caratteristiche dei primer e quelle degli smalti. Il vantaggio evidente è che non occorre più applicare due strati di vernice (primer + smalto), riducendo di conseguenza il numero di prodotti da tenere a magazzino, eliminando una fase di appassimento e velocizzando così i tempi di produzione. Il limite principale finora riscontrato nello sviluppo delle vernici idrosolubili DTM era quello di combinare le prestazioni anticorrosive con un aspetto estetico paragonabile agli elevati standard richiesti dal mercato Heavy Machinery. In questo settore infatti spesso si richiedono brillantezze superiori a 90 gloss (a 60°). Il laboratorio di Minerbio della Inver-Valspar ha pertanto messo a punto in questi ultimi mesi una nuova innovativa piattaforma a base di resine idrosolubili poliuretaniche bicomponenti, denominata INVERPUR 2K DTM. Partendo dalla riconosciuta piattaforma Inverpur, ormai utilizzata da decenni presso tutti i principali clienti di macchine movimento terra, agricole, trasporti, o industria generica, il laboratorio ha testato nuove resine e nuovi additivi, cercando la giusta combinazione per ottenere, insieme a un induritore ad alte prestazioni, una perfetta formulazione sotto tutti i punti di vista, compreso il mantenimento in fase di applicazione di un basso valo-
international PAINT&COATING magazine - NOVEMBER/DECEMBER 2016 - N. 42
89