E N G L IS H
2022
CAR WASH
NEW 2022 ROTATING BOOMS AND ACCESSORIES
CLUB DEI RIPARATORI
Rotating “Z” ceiling boom, made of AISI 201 stainless steel 360°
INOX
Max pressure
220bar
Max temperature
90°C
Code
Length
Inlet
Outlet
ZX.2670-M175
1750mm
G3/8" M
G3/8" M swivel
Telescopic rotating ceiling boom, made of AISI 201 stainless steel 360°
INOX
Max pressure
220bar
Max temperature
90°C
Code
Length
Inlet
Outlet
ZX.2671-M175
1600mm/1750mm
G3/8" M
G3/8" M swivel
Double telescopic rotating ceiling boom made of AISI 201 stainless steel
360°
INOX
2
Max pressure
220bar
Max temperature
90°C
Code
Length
Inlet
Outlet
ZX.2672-D175
1600mm/1750mm
G3/8" M
G3/8" M swivel
Copyright© Idrobase Group. All rights reserved.
NEW 2022 GUNS DRITTA spray gun
Code
Inlet
CDR.2085 M22x1,5 M
Outlet G1/4" F
DRITTA Professional spray gun ideal for underbody lance. Max pressure Max flow rate
345bar 38l/min
Watch the video
ECO1 permanent weep spray gun
Code
Inlet
Outlet
CDR.2093
G3/8” F swivel G1/4" F
ECO1 spray gun, permanent weep Max pressure Max flow rate Weeping
280bar 25l/min 1,4l/min a 3bar
Watch the video
ROTATING BOOMS AND ACCESSORIES Lance holder INOX
Code
Length
Diameter
ZX.2675
730mm
Ø60mm
Lance holder floor stand, made of AISI 201 stainless steel.
Copyright© Idrobase Group. All rights reserved.
3
NEW 2022 UNDERBODY LANCE
CLUB DEI RIPARATORI
Underbody washing lance with 3 nozzles
Nozzles • n. 3 nozzles 1/8NPT-M • angle 40° • flow rate 015
The underbody washing lance is ideal for cleaning the underside of cars, campers and company vans. It removes road dirt, fuel and oil residues, snow sludge and salt that could corrode the metal parts of vehicles.
This underbody lance is ideal with DRITTA gun (cod. CDR.2085) and for high pressure washer: • 120bar-11l/min • 140bar-12l/min • 170bar-13l/min • 180bar-14l/min
4
Max pressure
180bar
Max temperature
90°C
Code
Inlet
Height
Diameter
ZX.2868-045
G1/4” M
1350mm
310mm
Copyright© Idrobase Group. All rights reserved.
NEW 2022 UNDERBODY LANCE Underbody rotating washing lance
Watch the video
Nozzles • n. 2 nozzles 1/8NPT-M • angle 25° • flow rate 020
The underbody rotating wash lance facilitates cleaning under vehicles: cars, trucks, agricultural machinery, heavy machinery of building and naval industry. An efficient and time-saving undercarriage cleaning solution. It removes road dirt, fuel and oil residues, snow sludge and salt that could corrode the metal parts of vehicles.
Ideal for high pressure washers: • 100bar-10l/min • 170bar-11l/min • 200bar-13l/min • 250bar-15l/min
Max pressure
275bar
Max temperature
90°C
Copyright© Idrobase Group. All rights reserved.
Code
Inlet
Height
Diameter
ZX.2873
M22x1,5 M
1550mm
560mm
5
NEW 2022 PANEL LANCE
CLUB DEI RIPARATORI
Telescopic lance for photovoltaic panels washing
Watch the video
Pales made of aliminium, complete with adapters for the connection, synthetic bristles. Max pressure 10bar.
6
Code
Length (close)
Length (open)
Brush
CDR.2096
1430mm
3800mm
300x70mm
Copyright© Idrobase Group. All rights reserved.
/ NOTES
Copyright© Idrobase Group. All rights reserved.
7
Copyrights© to this catalogue belong to IDROBASE GROUP® Srl. Reading, reference and dissemination in paper or electronic formats for personal use are permitted. Use for commercial purposes is not permitted, nor is any type of alteration except with the written consent of IDROBASE GROUP® Srl. This catalogue cancels and supersedes the earlier version. This catalogue provides general information on the products supplied by IDROBASE GROUP® Srl. It is intended for retailers, system engineers, designers and more generally, all those who are already adequately familiar with said products, the materials from which they are made, their characteristics, efficiency and operation; it is therefore not intended for consumers who, in order to handle, install or perform any operation with the goods described here, must necessarily contact qualified and skilled personnel. Also, with regard to skilled personnel, this catalogue should be considered a mere commercial tool, not containing the necessary technical specifications - which may be obtained free of charge from Idrobase, and as such, not suitable for use as a single go-to reference tool for the design, construction or installation of any kind of system. The illustrations, technical characteristics, functions and other information given here about individual products, systems, installations and the like are based on the current state of the art: however, only the most immediately applicable information can be reproduced here, without any consideration for the global data necessary to design, implement and install any system, which must therefore be carefully assessed by designers, system engineers and installers. Therefore, for specific indications on all products in the catalogue, please contact our main office, where competent staff are always on hand to answer any additional queries. All the illustrations reproduced here may be slightly different from actual products and therefore, they should simply be intended as closely representing real items. We reserve the right to introduce changes in all the products. For this reason, too, it is advisable to directly contact our main office. In case of doubts regarding interpretation, the original Italian text will prevail. When a new reprint is published, the present edition will no longer be valid.
Idrobase Group Srl Via dell’Industria, n. 25 35010 Borgoricco (PD) Italia
MADE IN ITALY
Aknowlegment of highst commercial reliability.
T: +39 049 9335903 r.a. F: +39 049 9335922 www.idrobasegroup.com info@idrobasegroup.com
Rev.00_2022-05