Yanmar 2TE67L-BV4 M08 Gehl and 80M Mustang Excavators Engine Parts Manual(50940516)

Yanmar

Engine M08 Gehl and 80M Mustang Excavators

ENGINE PARTS MANUAL

2TE67L-BV4

Form No. 50940516 Revision B July 2017

INTRODUCTION General •

•

MANITOU AMERICAS, INC. reserves the right to make changes or improvements in the design or construction of any part of the machine without incurring the obligation to install such changes on any previously delivered machines.

This parts manual should not be used as a technical data reference; it uses simplified illustrations and does not detail servicing procedures.

•

•

• •

Parts Ordering Information •

•

When ordering service parts, specify the correct part number, full description and quantity required, as well as the respective machine and engine model and serial numbers. For your safety and continued proper operation, use only genuine service parts.

“Right”, “left”, “front” and “back” are determined from a position sitting on the operator’s seat and facing forward, and the excavator “house” rotated so that the blade is also facing forward.

Ref. Nos. shown in the parts listings without part numbers are shown for reference purposes only and are not available for purchase.

Boxes or brackets may be used in some illustrations to indicate assemblies (part groupings), or in some cases to highlight different versions of individual parts or assemblies.

Text references may be present on some illustrations to provide additional information.

Some illustrations will contain circled letters or a circled combination of letters and numbers in addition to the regular number callouts.

These special callouts may be used to identify hydraulic port locations which are marked on components, or to identify the two ends of a hose, tube, or other part that is shown split in the illustration. They may also be used to indicate a common reference point when different versions of components are shown on the illustration.

Serial Numbers and Reference Number Sequences in Parts Lists Serial Numbers

Machine and Engine Serial Number Location

Parts changes are often defined by serial numbers, or less often by date codes.

The machine model and serial number are located on a tag at the lower left front of the cab, or the inside of the canopy roof, as equipped. The engine serial number is located on the valve cover.

•

Torque Charts Standard attaching hardware torque values are provided on the inside back cover, and some torque values may be shown in illustrations. Metric torque values are shown in Newton-meters, and are converted to foot-pounds by multiplying by 0.738.

Illustrations and Parts Lists • •

Not all parts shown in the illustrations may be included in the parts listings; some are not serviced separately or are not included on engines sold in all areas.

Serial numbers have prefixes M=Machine, E=Engine, and are indicated as follows: (SN M999 and before) – indicates serial numbers up to and including M999 (SN M1000 – 1999) – indicates serial numbers between M1000 and 1999 (SN M2000 and Up) – indicates serial numbers including M2000 to present (From 1st SN) – indicates that the part can be used on all machines from 1st serial number to present.

“XXXXX” and “ZZZZZ” are used in the SN sequence instead of numbers for parts that have changed, but where the serial number for the change is not known.

In some cases, a date code is used instead of a serial number, and is displayed in the YYYY.MM format. Months will be displayed as .01-.12. For example, 2008.02 would be the second month (February) of 2008.

INTRODUCTION Reference Number Sequencing in Parts Lists

Unless otherwise specified, all cap screws, nuts, and bolts are Grade 8.8, cadmium or zinc plated.

NOTE:

NOTE: The following abbreviations may be

Reference numbers in the illustrations and parts listings may include sequencing variations of hyphens (-) and/or letters.

FOR EXAMPLE (Ref. Nos.): 5 = Original version/configuration of a part or assembly 5-1, 5-2, etc. = The hyphen (-) indicates an updated version/configuration of Ref. No. 5, and should have an associated serial number. The highest numbered version is the latest. If a hyphenated version is shown in the parts listing, but only the nonhyphenated version is shown in the illustration, the versions are visually similar. Multiple versions may be shown in the illustration, to identify changes.

5A, 5B, etc. = These parts do not replace Ref. Nos. 5 or 5-1, they are added components and may have an associated serial number.

5-1A, 5-1B, etc. = These are added components and may have an associated serial number.

NOTE:

There may be a Ref. No. 5A without an associated Ref. No. 5 in the list. In that example, Ref. No. 5A is a newly added part and may have an associated serial number and also an additional note or remark.

used herein: ASSD...................... Assembled ASSY...................... Assembly AR .......................... As Required CB........................... Carriage Bolt CP ........................... Cotter Pin CS ........................... Cap Screw (Hexagon Head) CYL........................ Cylinder DIA......................... Diameter FHCS...................... Flat Head Cap Screw GR .......................... Grade HB .......................... Hex Bolt HLN........................ Hex Lock Nut HN .......................... Hex Nut HP........................... High Pressure HYD ....................... Hydraulic INS ......................... Insert LN........................... Lock Nut LT ........................... Left LW .......................... Lock Washer M ............................ Meter or Meters MM/mm ................. Millimeter NPT ........................ National Pipe Thread OS........................... Oversized RT ........................... Right SHCS...................... Socket Head Cap Screw SLTD ...................... Slotted SN........................... Serial Number or Slotted Nut SQ........................... Square US........................... Undersized W/ ........................... With W/O ........................ Without

Gehl® and Mustang® are registered trademarks of Manitou Americas, Inc.

INTRODUCTION

TABLE OF CONTENTS Introduction.................................................. i Table of Contents......................................... I Fig. 1 - Cylinder Block ..........................1 Fig. 2 - Crankshaft & Piston ..................3 Fig. 3 - Cylinder Head ...........................5 Fig. 4 - Tiiming Gear Case & Governor ..............................................7 Fig. 5 - Injection Pump & Injector.........9 Fig. 6 - Water Pump.............................11 Fig. 7 - Accessory Parts .......................13 Fig. 8 - Gasket Set................................15 Numerical Index ........................................18

Printed in U.S.A.

I

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 1 - CYLINDER BLOCK

50940516/BP0717

1

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 1 - CYLINDER BLOCK Ref. No. Part No.

Description

Qty.

1

50293249

CYLINDER BLOCK ASSY

1

2

50293189

BUSHING

1

3

50293030

PLUG

4

4

50293054

PLUG

3

5

50293061

PLUG

1

6

50293071

CAP/SEALING

1

7

50293072

CAP/SEALING

1

8

50293097

CAP/SEALING

3

9

50293107

PLUG

1

10

50293729

BEARING/BALL

1

11

50293163

BEARING/NEEDLE

1

12

50293206

GEAR SHAFT/IDLE

1

13

50293038

PIN/DOWEL

2

14

50293052

PIN/DOWEL

2

15

50293092

PIN

2

16

50293057

PIN/SPRING

2

17

50293064

BOLT/STUD

2

18

50293056

BOLT/STUD

1

19

50293100

BOLT/STUD

1

20

50293175

PIPE/OIL PAN

1

21

50293082

O-RING

1

22

50293181

FILTER/SUCTION

1

23

50293034

BOLT

2

24

50293221

OIL PAN

1

25

50293096

BOLT

1

26

270972

WASHER/SEAL 12(BOLT)

1

27

50293173

GASKET

1

28

50293026

BOLT

14

29

50293160

TAPPET

4

30

50293133

PUSH ROD

4 1

31

50293116

PIPE/THREADED

32

50292990

OIL FILTER

1

33

50293106

PLUG

1

34

50293179

DIPSTICK BASE

1

35

50293149

DIPSTICK

1

36

50293062

O-RING

2

37

50293034

BOLT

1

38

50293245

ACTUATOR

1

39

50293080

WASHER/SEAL

1

40

50293200

VALVE/RELIEF

1

41

50293117

O-RING

1

42

50293232

BUSHING US=0.25MM *

1

* Under-sized (U.S.=0.25)

Printed in U.S.A.

2

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 2 - CRANKSHAFT & PISTON

50940516/BP0717

3

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 2 - CRANKSHAFT & PISTON Ref. No. Part No. 1

50293244

Description CRANKSHAFT ASSY

Qty. 1

2

50293046

PIN/DOWEL

1

3

50293223

GEAR/CRANK

1

4

50293209

BEARING CAP

1

5

50293730

BOLT

2

6

50293045

PIN/DOWEL

2

7

50293212

BEARING CAP

1

8

50293730

BOLT

2

9

50293045

PIN/DOWEL

2

10

50293065

BOLT/SPRING

1

11

50293074

BOLT

2

12

50293185

SEAL/OIL

1

13

50293225

PLATE

1

14

50293211

PLATE

1

15

50282507

BOLT W/WASHER M8X20

8

16

50293240

FLYWHEEL ASSY

1

17

50293217

GEAR/RING

1

18

50293110

BOLT

4

19

50293243

STARTER

1

20

50293067

BOLT

2

21

50293239

CONNECTING ROD ASSY

2

22

50293084

NUT

2

23

50293129

BOLT

2

24

50293197

BUSHING

2

25

50293164

BEARING

4

26

50293183

PIN/PISTON

2

27

50293043

RING

4

28

50293215

PULLEY/CRANKSHAFT

1

29

50293085

KEY

1

30

50293075

LOCKNUT

1

31

50292989

V-BELT

1

32

50293199

BRACKET/SPEED SENSOR

1

33

50293224

SENSOR/SPEED

1

34

50282506

BOLT W/WASHER M8X16

2

35

50293233

PISTON KIT

2

36

50293226

PISTON RING KIT

2

37

50293187

BEARING

1

38

50293165

BEARING KIT

1

39

50293195

BEARING US=0.25MM *

4

40

50293216

KIT/BEARING US=0.25MM *

1

41

50293214

KIT/BEARING US=0.25MM *

1

* Under-sized (U.S.=0.25)

Printed in U.S.A.

4

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 3 - CYLINDER HEAD

50940516/BP0717

5

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 3 - CYLINDER HEAD Ref. NO. Part No.

Description

Ref. NO. Part No.

Qty.

Description

Qty.

1

50293213

PIPE/OIL

1

48

50293058

BOLT

3

2

50293103

GASKET

4

49

50293122

PLUG

1

3

50293104

BOLT

2

50

50293081

O-RING

1

4

50293230

GASKET/HEAD/1.2MM

1

51

50293219

GLOW PLUG

2

5

50293248

CYLINDER HEAD ASSY

1

52

50293153

CONNECTOR

1

6

50293095

CAP/SEALING

4

53

50293022

NUT

2

7

50293072

CAP/SEALING

1

54

50293138

HARNESS/WIRE

1

8

50293144

SEAL/VALVE GUIDE

4

55

50293228

MANIFOLD/EXHAUST

1

9

50293170

VALVE

2

56

50293059

BOLT/STUD

4

10

50293188

VALVE

2

57

50293135

GASKET/EXHAUST MANIFOLD

1

11

50293101

SPRING

4

58

50293182

VALVE SEAT

2

12

50293124

RETAINER/VALVE

4

59

50293231

GASKET/HEAD/1.3MM

1

8

13

50293113

KEEPER/VALVE

14

50293099

BOLT/STUD

1

15

50293068

PIN

2

16

50293125

BOLT/HEAD

8

17

50293126

BOLT/HEAD

2

18

50293731

STUD

2

19

50293145

HANGER

2

20

50282506

BOLT W/WASHER M8X16

1

21

50282507

BOLT W/WASHER M8X20

1

22

50293141

COLLAR

1

23

50293130

BOLT/STUD

2

24

50293108

CAP/VALVE

4 1

25

50293238

ROCKER ARM ASSY

26

50293203

ROCKER ARM/INTAKE

2

27

50293202

ROCKER ARM/EXHAUST

2

28

50293088

SPRING

1

29

50293198

SHAFT/ROCKER ARM

1

30

50293098

SCREW

4

31

50293029

NUT

4

32

50293136

PLUG

1

33

138125

O-RING

1

34

50293042

PIN/SPRING

2

35

50293039

NUT

4

36

50293037

BOLT

3

37

50293167

GASKET

1

38

50293169

SWITCH/OIL PRESSURE

1

39

50293227

COVER/HEAD

1

40

50293120

FILTER

1

41

50293142

PLATE

1

42

50293732

SCREW

4

43

50293178

VALVE

1

44

50293023

BOLT

4

45

50293168

GASKET

1

46

50293091

NUT/CAP

2

47

50293031

GASKET

2

Printed in U.S.A.

6

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 4 - TIIMING GEAR CASE & GOVERNOR

50940516/BP0717

7

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 4 - TIIMING GEAR CASE & GOVERNOR Ref. NO. Part No.

Description CAMSHAFT ASSY

1

50293241

2

50293229

CAM GEAR ASSY

1

3

50293162

GEAR

1

4

50293028

SPACER

3

5

50293157

BEARING

1

6

50293085

KEY

1

7

50293186

SLIDER

1

8

50293114

PLATE

1

9

50293034

BOLT

1

10

50293047

BOLT

1

11

50293242

TIMING GEARCASE ASSY

1

12

50293068

PIN

1

13

50293218

LEVER/GOVERNOR

1

14

50284051

CIRCLIP E- 8

2

15

50282377

WASHER 10

1

16

50293201

LEVER/GOVERNOR

1

17

50293208

BALANCE SET

1

1

18

50293143

SHAFT

1

19

50293025

O-RING

2

20

50293041

RING

1

21

50293174

SPRING

1 1

22

50293161

ARM

23

50293118

SPRING

1

24

50293044

O-RING

1

25

50293172

ARM

1

26

425-34970

CIRCLIP E-6

1

27

50293027

BOLT

1

28

50293083

LEVER

1

29

425-34794

LOCK NUT M8 PLATED

2 1

30

138515

WASHER 8

31

50293111

SPRING

1

32

50293155

BRACKET

1

33

50293048

BOLT

2

34

50293086

BOLT

2

35

50293148

GASKET

1

36

50293177

SEAL/OIL

1

37

50293139

LEVER/GOVERNOR

1

38

50293033

BOLT

1

39

50293039

NUT

4

40

50293050

BOLT

4

41

50293024

BOLT

2

42

50293053

BOLT

2

43

50293077

COVER

1

44

50293109

GASKET

1

45

50293063

BOLT

4

46

50293040

NUT

4

47

50293204

BRACKET/CABLE

1

Printed in U.S.A.

Ref. NO. Part No.

Qty.

48

8

425-35960

Description SNAP PIN 4

Qty. 1

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 5 - INJECTION PUMP & INJECTOR

50940516/BP0717

9

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 5 - INJECTION PUMP & INJECTOR Ref. NO. Part No.

Description PUMP/INJECTION

Qty.

1

50293246

1

2

50293036

BOLT

2

3

50293039

NUT

3

4

50293127

CONNECTOR

1

5

50293060

WASHER/SEAL

1

6

50293019

GASKET

2

7

50293020

INJECTOR

2

8

50293234

PUMP/FEED

1

9

50293102

GASKET

4

10

50293128

BOLT

2

11

50293094

GASKET/FEED PUMP

1

12

50293048

BOLT

1

13

50293035

BOLT

1

14

50293159

FITTING/BANJO EYE

2

15

50293191

TUBE/INJECTION

1

16

50293192

TUBE/INJECTION

1

17

50293105

CLAMP ASSY

2

18

50293032

BOLT

1

19

50293196

TUBE/RETURN

1

20

50293093

HOSE

2

21

50293069

CLIP/HOSE

4

22

50293207

BRACKET/FUEL FILTER

1

23

50282506

BOLT W/WASHER M8X16

2

24

50293112

HOSE

1

25

50293121

HOSE

1

26

50293166

PIPE

1

27

50293070

CLIP

6

28

50293158

HOSE

1

29

50293222

FUEL FILTER COMPLETE

1

30

50282463

O-RING 1A P-44.0

1

31

50292988

ELEMENT

1

32

50293190

NUT/RING

1

33

50293073

BOLT

1

34

138515

WASHER 8

1

35

50293090

CLAMP

1

36

50293171

SHIM

1

Printed in U.S.A.

10

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 6 - WATER PUMP

50940516/BP0717

11

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 6 - WATER PUMP Ref. NO. Part No. 1

50293146

2 3

Description

Qty.

GASKET

1

50293176

PLATE

1

50293034

BOLT

3

4

50293235

IDLE GEAR ASSY

1

5

50293079

SPRING

1

6

50293180

ROTOR

1

7

50293055

WASHER/THRUST

1

8

50293152

COVER/OIL PUMP

1

9

50293078

SPRING

1

10

50293087

COLLAR

1

11

50284052

CIRCLIP E-10

1

12

50293236

PUMP/WATER

1

13

50293150

GASKET/WATER PUMP

1

14

50293156

PLATE

1

15

50293151

GASKET

1

16

50293193

HOUSING/THERMOSTAT

1

17

50293115

GASKET/THERMO CASE

1

18

50293051

BOLT

6

19

50293039

NUT

2

20

50293184

THERMOSTAT

1

21

50293119

SPRING

1

22

50293194

SENSOR/TEMPERATURE

1

23

50293049

BOLT

3

24

50293140

BOLT

1

25

50293080

WASHER/SEAL

1

26

50293147

PLATE/ADJUSTING

1

27

50282506

BOLT W/WASHER M8X16

1

28

50292971

ALTERNATOR

1

29

50288177

BOLT

1

30

50293040

NUT

1

31

50293066

BOLT/STUD

1

32

50293089

WASHER

1

33

50282380

WASHER 8, POLISHED

1

34

50282392

WASHER, 8

1

35

50293134

NUT

1

36

50293205

PULLEY/FAN

1

37

50293154

SPACER/FAN

1 1

38

50293210

FAN/COOLING

39

50293037

BOLT

4

40

50293123

SHIM SET

1

Printed in U.S.A.

12

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 7 - ACCESSORY PARTS

50940516/BP0717

13

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 7 - ACCESSORY PARTS Ref. NO. Part No.

Description

Qty.

1

50293247

ECU/2TE67L-BV4 *

2

50293132

BRACKET

1 1

3

50293220

SENSOR/PRESSURE

1

4

50293076

NUT

1

* To expedite ordering a replacement ECU, contact Customer Service and have the following information at hand; engine model number, engine serial number, fuel injection pump part number and fuel injection pump serial number.

Printed in U.S.A.

14

50940516/BP0717

YANMAR 2TE67L-BV4 FIG. 8 - GASKET SET

50940516/BP0717

15

Printed in U.S.A.

YANMAR 2TE67L-BV4 FIG. 8 - GASKET SET Ref. NO. Part No.

Description

Qty.

2

50293231

GASKET/HEAD/1.3MM

1

3

50293171

SHIM

1

4

50293173

GASKET

1

5

50293185

SEAL/OIL

1

6

138515

O-RING

1

7

50293082

O-RING

1

8

50293062

O-RING

2

9

50293117

O-RING

1

10

50293148

GASKET

1

11

50293146

GASKET

1

12

50293094

GASKET/FEED PUMP

1

13

50293177

SEAL/OIL

1

14

50293109

GASKET

1

15

50293151

GASKET

1

16

50293150

GASKET/WATER PUMP

1

17

50293115

GASKET/THERMO CASE

1

18

50293019

GASKET

2

19

50293144

SEAL/VALVE GUIDE

4

20

50293081

O-RING

1

21

50293031

GASKET

2

22

50293103

GASKET

4

23

50293168

GASKET

1

24

50293167

GASKET

1

25

50293135

GASKET/EXHAUST MANIFOLD

1

26

50293137

GASKET

2

27

50293131

GASKET

1

Printed in U.S.A.

16

50940516/BP0717

Notes F Fig. 1 - Cylinder Block ................................ 1 Fig. 2 - Crankshaft & Piston ....................... 3 Fig. 3 - Cylinder Head ................................. 5 Fig. 4 - Tiiming Gear Case & Governor ..... 7 Fig. 5 - Injection Pump & Injector .............. 9 Fig. 6 - Water Pump .................................. 11 Fig. 7 - Accessory Parts ............................ 13 Fig. 8 - Gasket Set ..................................... 15

I Introduction .................................................. i

N Numerical Index ........................................ 18

T Table of Contents .........................................I

50940516/BP0717

17

Printed in U.S.A.

Yanmar 2TE67L-BV4 - Numerical Index

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

138515

6

33

50293034

8

9

50293065

4

10

138515

8

30

50293034

12

3

50293066

12

31

138515

10

34

50293035

10

13

50293067

4

20

138515

16

6

50293036

10

2

50293068

6

15

270972

2

26

50293037

6

36

50293068

8

12

50282377

8

15

50293037

12

39

50293069

10

21

50282380

12

33

50293038

2

13

50293070

10

27

50282392

12

34

50293039

6

35

50293071

2

6

50282463

10

30

50293039

8

39

50293072

2

7

50282506

4

34

50293039

10

3

50293072

6

7

50282506

6

20

50293039

12

19

50293073

10

33

50282506

10

23

50293040

8

46

50293074

4

11

50282506

12

27

50293040

12

30

50293075

4

30

50282507

4

15

50293041

8

20

50293076

14

4

50282507

6

21

50293042

6

34

50293077

8

43

50284051

8

14

50293043

4

27

50293078

12

9

50284052

12

11

50293044

8

24

50293079

12

5

50288177

12

29

50293045

4

6

50293080

2

39

50292971

12

28

50293045

4

9

50293080

12

25

50292988

10

31

50293046

4

2

50293081

6

50

50292989

4

31

50293047

8

10

50293081

16

20

50292990

2

32

50293048

8

33

50293082

2

21

50293019

10

6

50293048

10

12

50293082

16

7

50293019

16

18

50293049

12

23

50293083

8

28

50293020

10

7

50293050

8

40

50293084

4

22

50293022

6

53

50293051

12

18

50293085

4

29

50293023

6

44

50293052

2

14

50293085

8

6

50293024

8

41

50293053

8

42

50293086

8

34

50293025

8

19

50293054

2

4

50293087

12

10

50293026

2

28

50293055

12

7

50293088

6

28

50293027

8

27

50293056

2

18

50293089

12

32

50293028

8

4

50293057

2

16

50293090

10

35

50293029

6

31

50293058

6

48

50293091

6

46

50293030

2

3

50293059

6

56

50293092

2

15

50293031

6

47

50293060

10

5

50293093

10

20

50293031

16

21

50293061

2

5

50293094

10

11

50293032

10

18

50293062

2

36

50293094

16

12

50293033

8

38

50293062

16

8

50293095

6

6

50293034

2

23

50293063

8

45

50293096

2

25

50293034

2

37

50293064

2

17

50293097

2

8

Printed in U.S.A.

18

50940516/BP0717

Yanmar 2TE67L-BV4 - Numerical Index

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

50293098

6

30

50293134

12

35

50293167

16

24

50293099

6

14

50293135

6

57

50293168

6

45

50293100

2

19

50293135

16

25

50293168

16

23

50293101

6

11

50293136

6

32

50293169

6

38

50293102

10

9

50293137

16

26

50293170

6

9

50293103

6

2

50293138

6

54

50293171

10

36

50293103

16

22

50293139

8

37

50293171

16

3

50293104

6

3

50293140

12

24

50293172

8

25

50293105

10

17

50293141

6

22

50293173

2

27

50293106

2

33

50293142

6

41

50293173

16

4

50293107

2

9

50293143

8

18

50293174

8

21

50293108

6

24

50293144

6

8

50293175

2

20

50293109

8

44

50293144

16

19

50293176

12

2

50293109

16

14

50293145

6

19

50293177

8

36

50293110

4

18

50293146

12

1

50293177

16

13

50293111

8

31

50293146

16

11

50293178

6

43

50293112

10

24

50293147

12

26

50293179

2

34

50293113

6

13

50293148

8

35

50293180

12

6

50293114

8

8

50293148

16

10

50293181

2

22

50293115

12

17

50293149

2

35

50293182

6

58

50293115

16

17

50293150

12

13

50293183

4

26

50293116

2

31

50293150

16

16

50293184

12

20

50293117

2

41

50293151

12

15

50293185

4

12

50293117

16

9

50293151

16

15

50293185

16

5

50293118

8

23

50293152

12

8

50293186

8

7

50293119

12

21

50293153

6

52

50293187

4

37

50293120

6

40

50293154

12

37

50293188

6

10

50293121

10

25

50293155

8

32

50293189

2

2

50293122

6

49

50293156

12

14

50293190

10

32

50293123

12

40

50293157

8

5

50293191

10

15

50293124

6

12

50293158

10

28

50293192

10

16

50293125

6

16

50293159

10

14

50293193

12

16

50293126

6

17

50293160

2

29

50293194

12

22

50293127

10

4

50293161

8

22

50293195

4

39

50293128

10

10

50293162

8

3

50293196

10

19

50293129

4

23

50293163

2

11

50293197

4

24

50293130

6

23

50293164

4

25

50293198

6

29

50293131

16

27

50293165

4

38

50293199

4

32

50293132

14

2

50293166

10

26

50293200

2

40

50293133

2

30

50293167

6

37

50293201

8

16

50940516/BP0717

19

Printed in U.S.A.

Yanmar 2TE67L-BV4 - Numerical Index

Part No.

Page No.

Ref. No.

Part No.

Page No.

Ref. No.

50293202

6

27

50293242

8

11

50293203

6

26

50293243

4

19

50293204

8

47

50293244

4

1

50293205

12

36

50293245

2

38

50293206

2

12

50293246

10

1

50293207

10

22

50293247

14

1

50293208

8

17

50293248

6

5

50293209

4

4

50293249

2

1

50293210

12

38

50293729

2

50293211

4

14

50293730

4

50293212

4

7

50293730

4

50293213

6

1

50293731

6

50293214

4

41

50293732

6

50293215

4

28

425-34794

8

29

50293216

4

40

425-34970

8

26

50293217

4

17

425-35960

8

48

50293218

8

13

50293219

6

51

50293220

14

3

50293221

2

24

50293222

10

29

50293223

4

3

50293224

4

33

50293225

4

13

50293226

4

36

50293227

6

39

50293228

6

55

50293229

8

2

50293230

6

4

50293231

6

59

50293231

16

2

50293232

2

42

50293233

4

35

50293234

10

8

50293235

12

4

50293236

12

12

50293238

6

25

50293239

4

21

50293240

4

16

50293241

8

1

Printed in U.S.A.

20

50940516/BP0717

Yanmar 2TE67L-BV4 - Numerical Index

50940516/BP0717

21

Printed in U.S.A.

TORQUE SPECIFICATIONS Note: Use these torque values when tightening hardware (excluding: locknuts and self-tapping, thread forming and sheet metal screws) unless specified otherwise.

Hydraulic fittings with various seals (light application). All torque values are in lb.-ft. (Nm) unless marked otherwise.

Straight pipe fitting with thread and screwed plug (GE) Sealing washer

Elastic seal

O-ring

Non-return valve with elastic seal

Identification aid outside Ø

M10X1.0

7 (9)

13 (18)

11 (15)

13 (18)

0.4 in. (10 mm)

M12X1.5

15 (20)

18 (25)

18 (25)

18 (25)

0.5 in. (12 mm)

M14X1.5

26 (35)

33 (45)

26 (35)

26 (35)

0.6 in. (14 mm)

M16X1.5

33 (45)

41 (55)

30 (40)

37 (50)

0.6 in. (16 mm)

M18X1.5

41 (55)

52 (70)

33 (45)

52 (70)

0.7 in. (18 mm)

M22X1.5

48 (65)

92 (125)

44 (60)

92 (125)

0.9 in. (22 mm)

M27X2.0

66 (90)

133 (180)

74 (100)

107 (145)

1.0 in. (27 mm)

M33X2.0

111 (150)

229 (310)

118 (160)

155 (210)

1.3 in. (33 mm)

M42X2.0

177 (240)

332 (450)

155 (210)

266 (360)

1.7 in. (42 mm)

M48X2.0

214 (290)

398 (540)

192 (260)

398 (540)

1.9 in. (48 mm)

G1/8A

7 (9)

13 (18)

11 (15)

13 (18)

0.4 in. (9.73 mm)

G1/4A

26 (35)

26 (35)

22 (30)

26 (35)

0.5 in. (13.16 mm)

G3/8A

33 (45)

52 (70)

33 (45)

37 (50)

0.7 in. (16.66 mm)

G1/2A

48 (65)

66 (90)

41 (55)

48 (65)

0.8 in. (20.96 mm)

G3/4A

66 (90)

133 (180)

74 (100)

103 (140)

1.0 in. (26.44 mm)

G1A

111 (150)

229 (310)

118 (160)

140 (190)

1.3 in. (33.25 mm)

G1 1/4A

177 (240)

332 (450)

155 (210)

266 (360)

1.7 in. (41.91 mm)

G1 1/2A

214 (290)

398 (540)

192 (260)

398 (540)

1.9 in. (47.80 mm)

Thread

Hydraulic fittings with various seals (heavy application). All torque values are in lb.-ft. (Nm) unless marked otherwise.

Straight pipe fitting with thread and screwed plug (GE) Sealing washer

Elastic seal

O-ring

Non-return valve with elastic seal

Identification aid outside Ø

M12X1.5

15 (20)

26 (35)

26 (35)

26 (35)

0.5 in. (12 mm)

M14X1.5

26 (35)

41 (55)

33 (45)

33 (45)

0.6 in. (14 mm)

M16X1.5

33 (45)

52 (70)

41 (55)

41 (55)

0.6 in. (16 mm)

M18X1.5

41 (55)

66 (90)

52 (70)

52 (70)

0.7 in. (18 mm)

M20X1.5

41 (55)

92 (125)

59 (80)

74 (100)

0.8 in. (20 mm)

M22X1.5

48 (65)

100 (135)

74 (100)

92 (125)

0.9 in. (22 mm)

Thread

M27X2.0

66 (90)

133 (180)

125 (170)

100 (135)

1.0 in. (27 mm)

M33X2.0

111 (150)

229 (310)

229 (310)

155 (210)

1.3 in. (33 mm)

M42X2.0

177 (240)

332 (450)

243 (330)

266 (360)

1.7 in. (42 mm)

M48X2.0

214 (290)

398 (540)

310 (420)

398 (540)

1.9 in. (48 mm)

G1/8A

26 (35)

41 (55)

33 (45)

33 (45)

0.5 in. (13.16 mm)

G1/4A

33 (45)

59 (80)

44 (60)

44 (60)

0.7 in. (16.66 mm)

G3/8A

48 (65)

85 (115)

55 (75)

74 (100)

0.8 in. (20.96 mm)

G1/2A

66 (90)

133 (180)

125 (170)

107 (145)

1.0 in. (26.44 mm)

G3/4A

111 (150)

229 (310)

229 (310)

192 (260)

1.3 in. (33.25 mm)

G1A

177 (240)

332 (450)

243 (330)

266 (360)

1.7 in. (41.91 mm)

G1 1/4A

214 (290)

398 (540)

310 (420)

398 (540)

1.9 in. (47.80 mm)

Printed in U.S.A.

50940516/BP0717

English coarse and fine pitch threads. All torque values are in lb.-ft. (Nm) unless marked otherwise.

Values marked with an asterisk (*) are in lb-in., values marked (**) are in Kg-Cm Thread - Pitch

Grade 2

Grade 5

Grade 8

Dry

Lubed

Dry

Lubed

Dry

Lubed

8-32

19* (21**)

14* (16**)

30* (34**)

22* (25**)

41* (47**)

31* (35**)

8-36

20* (23**)

15* (17**)

31* (35**)

23* (26**)

43* (49**)

32* (36**)

10-24

27* (31**)

21* (24**)

43* (49**)

32* (36**)

60* (69**)

45* (51**)

10-32

31* (35**)

23* (26**)

49* (56**)

36* (41**)

68* (78**).

51* (58**)

1/4-20

66* (76**)

50* (57**)

9 (12)

75* (86**)

12 (16)

9 (12)

1/4-28

76* (87**)

56* (64**)

10 (14)

86* (99**)

14 (19)

10 (14)

5/16-18

11 (1.5)

9 (12)

17 (23)

13 (18)

25 (34)

18 (24)

5/16-24

12 (16)

9 (12)

19 (26)

14 (19)

25 (34)

20 (27)

3/8-16

20 (27)

15 (20)

30 (41)

23 (31)

45 (61)

35 (47)

3/8-24

23 (31)

17 (23)

35 (47)

25 (34)

50 (68)

35 (47)

7/16-14

32 (43)

24 (33)

50 (68)

35 (47)

70 (95)

55 (75)

7/16-20

36 (49)

27 (37)

55 (75)

40 (54)

80 (108)

60 (81)

1/2-13

35 (47)

35 (47)

75 (102)

55 (75)

110 (149)

80 (108)

1/2-20

40 (54)

40 (54)

90 (122)

65 (88)

120 (163)

90 (122)

9/16-12

55 (75)

55 (75)

110 (149)

80 (108)

150 (203)

110 (149)

9/16-18

60 (81)

60 (81)

120 (163)

90 (122)

170 (230)

130 (176)

5/8-11

75 (102)

75 (102)

150 (203)

110 (149)

220 (298)

170 (230)

5/8-18

85 (115)

85 (115)

180 (244)

130 (176)

240 (325)

180 (244)

3/4-10

130 (176)

130 (176)

260 (353)

200 (271)

380 (515)

280 (380)

3/4-16

150 (203)

150 (203)

300 (407)

220 (298)

420 (569)

320 (434)

7/8-9

125 (169)

125 (169)

430 (583)

320 (434)

600 (813)

460 (624)

7/8-14

140 (190)

140 (190)

470 (637)

360 (488)

660 (895)

500 (678)

1-8

190 (258)

190 (258)

640 (868)

480 (651)

900 (1220)

680 (922)

1-14

210 (285)

210 (285)

710 (963)

530 (719)

1000 (1356)

740 (1003)

50940516/BP0717

Printed in U.S.A.

With coarse-pitch thread. All torque values are in lb.-ft. (Nm) unless marked otherwise.

Thread

Threads according to DIN 912, DIN 931, DIN 933, etc.

8.8

10.9

Threads according to DIN 7984

12.9

8.8

10.9

M5

4.1 (5.5)

6 (8)

7 (10)

4 (5)

5 (7)

M6

7 (10)

10 (14)

13 (17)

6.3 (8.5)

9 (12)

M8

18 (25)

26 (35)

31 (42)

15 (20)

22 (30)

M10

33 (45)

48 (65)

59 (80)

30 (40)

44 (59)

M12

64 (87)

81 (110)

108 (147)

51 (69)

74 (100)

M14

100 (135)

133 (180)

170 (230)

81 (110)

118 (160)

M16

155 (210)

203 (275)

258 (350)

125 (170)

184 (250)

M18

207 (280)

302 (410)

354 (480)

181 (245)

254 (345)

M20

302 (410)

420 (570)

509 (690)

251 (340)

361 (490)

M22

406 (550)

575 (780)

686 (930)

339 (460)

487 (660)

M24

524 (710)

738 (1000)

878 (1190)

435 (590)

620 (840)

M27

767 (1040)

1092 (1480)

1305 (1770)

642 (870)

922 (1250)

M30

1047 (1420)

1482 (2010)

1770 (2400)

885 (1200)

1254 (1700)

With fine-pitch thread. All torque values are in lb.-ft. (Nm) unless marked otherwise.

Thread

Threads according to DIN 912, DIN 931, DIN 933, etc.

8.8

10.9

Threads according to DIN 7984

12.9

8.8

10.9

M8X1.0

18 (25)

27 (37)

32 (43)

16 (22)

24 (32)

M10X1.0

37 (50)

55 (75)

65 (88)

32 (43)

48 (65)

M10X1.25

36 (49)

52 (71)

61 (83)

31 (42)

46 (62)

M12X1.25

64 (87)

96 (130)

111 (150)

55 (75)

81 (110)

M12X1.5

61 (83)

92 (125)

107 (145)

53 (72)

77 (105)

M14X1.5

100 (135)

148 (200)

173 (235)

89 (120)

129 (175)

M16X1.5

155 (210)

229 (310)

266 (360)

133 (180)

195 (265)

M18X1.5

232 (315)

332 (450)

391 (530)

199 (270)

284 (385)

M20X1.5

325 (440)

465 (630)

538 (730)

277 (375)

391 (530)

M22X1.5

435 (590)

620 (840)

723 (980)

369 (500)

524 (710)

M24X2.0

546 (740)

789 (1070)

922 (1250)

465 (630)

664 (900)

M27X2.0

811 (1100)

1143 (1550)

1328 (1800)

679 (920)

959 (1300)

M30X2.0

1106 (1500)

1586 (2150)

1844 (2500)

959 (1300)

1364 (1850)

Printed in U.S.A.

50940516/BP0717

Manitou Americas, Inc. P.O. Box 179, West Bend, WI 53095-0179 U.S.A. www.gehl.com / www.mustangmfg.com

50940516/BP0717

© 2017 All rights reserved.

Printed in U.S.A.