White KnickerBocker 2000-12000 LB Forklift Trucks Parts Manual - PDF DOWNLOAD

PARTS CATALOG R-2234

TRIPLEX MULTI-LIFT UPRIGHT TRIPLEX TRI-LO UPRIGHT TRIPLEX HIGH FREE UPRIGHT SIMPLEX TWO-RAIL UPRIGHT

KNICKERBOCKER

FOR ALL WHITE FORK LIFT TRUCKS 2000 TIHIRU112,000 LB. CAPACITY TABLE OF CONTENTS FOR UPRIGHTS

Triplex Triplex Triplex Triplex Simplex

Upright Upright Upright Upright Upright

-Multi Lift, 2500# thru 4000# -Tri-Lo, 2500# thru 5000# -High Free, 2500# thru 5000# - High Free, 6000# thru 8000# - Two Rail, 6000# thru 12000#

Pages Pages Pages Pages Pages

2-8 10-25 26-47 48-51 52-66

White Materials Handling Company A SUBSIDIARY OF WHITE MOTOR CORPORATION

WHITE MOTOR CORPORATION

HOPKINS, MINNESOTA 55343

IM

7-74

PRICE $1.00

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX MAST - MULTI LIFT (Knickerbocker) - 2500# For MSA, Bdle. 1644-1645 (Tab, 2012) 1

2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 36

35P1612 35P1614 35P653 35P1617 35P1613 35P1616 35P1768 35P667 35P669 35P654 35P661 35P1624 35P1618 35P656 35P1615

35P1623 35P1621 35P1622 35P667 35P1620 35P1146 35P1145 35P1134

35P1147 35A4046 35A5301 35A10422

35A12346 35A1464 35A7307 35A7349 35P1776

Rail - outer assembly 50A1169 - Bolt, 12 pt., 1/2"-13 x 2-1/2" GM120384 - Washer, lock, 1/2" Rail - center assembly Rail - inner assembly Pad - wear (welded to rails) *Cylinder - assembly, see page 4 breakdown Screw - cylinder Spacer - cylinder mounting Lock - roller shaft Shaft - chain roller, inner Fitting - grease, 1/4" drive x 45 ° (Alemite 1668) Washer - bearing Bearing - 3" chain roller Roller - chain, 3" dia Anchor - chain, turnbuckle and carriage *Chain - lift, 5/8" pitch No. BL534 Anchor - chain GM219753 - Nut, hex., jam, 3/4"-16 Turnbuckle - anchor rod *Rod - lift *NOTE: Order parts for lift by serial number of mast plus MFH and OAHL GM219753 - Nut, hex., jam, 3/4"-16 Ring - bearing retaining Bearing - roller Tire - roller Washer - bearing Race - bearing, inner Shaft - roller Support - shaft Screw - shaft support Fitting - grease (Alemite No. 1728B) GM215524 - Bolt, hex., 3/8"-24 x 1-3/4" 50A4239 - Washer, shake proof, 5/8" 50A4205 - Washer, plain, 3/8" Roller - shaft Bushing - axle Pin - tilt Pin - tilt cylinder, 1.242 dia. x 3-1/4",(chrome plated) 50A2852 - Pin, roll, 1/4" x 2-1/2" GM191758 - Fitting, grease, 1/8" straight GM444563 - Plug, pipe, for hydraulic tank, 1/8"-27 Hose - cylinder, hose retainer Spacer - hose Fitting - vent, 1/4"-90 ° Tube - vent, 1/4" x 3/8" Hose - vent, 1 foot, 1/4" I.D., order length needed 50A3573 clamp - hose .

2

1

4 4 1 1

36

1 1 1

4 4 4 2 4 4 4 4 4 4 2 2 2 4 4 4 8 4 4 8 4 1

4 8 8 4 2 2 2 2 3

1 1 1 1 1

A.R. 2

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - MULTI LIFT (Knickerbocker) - 2500# 1

35P1614

2

35P1625 35P1626

3 4 5 6 7 8 9 10 11 12

13 14 15 16 17 18 18 18 18 18 18 18 18 18 18 19 20

21 22 23 24

35P1634 35P1633 35P1631 35P1632 35P1627 35P1635 35P1636 35P1629 35P1628 35P1630 35P1637 35P1638 35A7307 35A7349 35A7334 35A7380 35A7381 35A7382 35A7383 35A7384 35A7385 35A7386 35A7387 35A7388 35A11249 35A1464 35P1670 35P2753 35P1671 35P2326

*Cylinder-lift, assembly, 3-3/4" 0.D Includes the following 13 parts: *Shell-with base, assembly *Rod-piston *NOTE: Order parts by serial number of mast plus MFH and OAHL. Snap Ring-piston **"0" Ring-piston, 1" I.D., 1-1/4" O.D Piston-cylinder **Ring-wiper, piston, 3-1/4" O.D Head-cylinder Bushing-head Ring-retaining, bushing Ring-retaining, cylinder head Cap-cylinder head **"0" Ring-cap, 1-7/16" I.D., 1" *Wiper- cap **Packing Kit-cylinder (includes parts identified with double asterisk) Fitting-vent 50A3573-Clamp, hose, 7/16" Tube-vent Hose-vent, for 62" OAHL and 126" MFH, 1/4" I.D. x 36" Hose-vent, for 65" OAHL and 135" MFH, 1/4" I.D. x 39" Hose-vent, for 68" OAHL and 144" MFH, 1/4" I.D. x 42" Hose-vent, for 71" OAHL and 153" MFH, 1/4" I.D. x 45" Hose-vent, for 74" OAHL and 162" MFH, 1/4" I.D. x 48" Hose-vent, for 77" OAHL and 171" MFH, 1/4" I.D. x 51" Hose-vent, for 80" OAHL and 180" MFH, 1/4" I.D. x 54" Hose-vent, for 83" OAHL and 189" MFH, 1/4" I.D. x 57" Hose-vent, for 86" OAHL and 198" MFH, 1/4" I.D. x 60" Hose-vent, for 89" OAHL and 207" MFH, 1/4" I.D. x 63" Clamp-vent hose, 5-1/4" dia.

Spacer-strap Spring-oil restrictor Disc-oil restrictor Spacer-oil restrictor Fitting-cylinder

4

1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

14 10 8 9 3 12

11

15

E

22 21 23 24

19

7

villapp

20

5

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX MAST - MULTI LIFT (KNICKERBOCKER) - 4000# FOR M40 1

2 3 35P662

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

35P657 35P650 35P651 35P658 35P655 35P659 35P656 35P664 35P665 35P1613 35P668 35P670 35P660 35P661 35P654 35P666 35P669 35P667 35P736 35P653 35P671 35P672 35P673 35P675 35P674 35P652 35P663

*Rail-outer, assembly *Rail-inner, assembly *Rail-center, assembly Pad-wear (welded to rails) *Cylinder-lift, see page 8 for breakdown Roller-side thrust Shaft-side thrust roller Lock-roller shaft Cage-side thrust roller Block-roller cage *Chain-1" Pitch, No. AL-844 Anchor-1" Pitch chain 50A5005 Nut, Hex, jam, 3/4"-16 *Rod-anchor Turnbuckle-anchor rod Roller-chain, 4" Shaft-chain roller Lock-lift Washer-thrust, 4" roller Bearing-4" chain roller *Chain-3/4" Pitch, No. AL-644 Anchor-3/4" Pitch chain, upper Anchor-3/4" Pitch chain, lower 50A4874 Nut, hex, 3/4"-16 Roller-chain, 3" Shaft-3" chain roller Bearing-3" chain roller Washer-thrust, 3" roller Roller Mount-on inner rail 908507 Bolt, hex, 1/2"-20 x 1-3/4" 50A4751 Nut, hex, 1/2"-20 Screw-piston rod anchor Spacer-piston rod screw Fitting-feed port Fitting-vent port Bearing-carriage Spindle-carriage bearing Plate-end, carriage spindle Screw, 3/8"-11 x 1-1/4" flathead (Nylock) *NOTE: Order parts for lift by serial number of mast plus MFH and OAHL

6

1 1 1

10 1

4 4 4 2 4 2 2 6 2 4 2 2 1

4 2 2 2 1

2 2 2 2 4 1

2 2

1 1 1 1

4 2 4 4

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

MULTI-LIFT CYLINDER - 4000# 1

2 3 6 7 5 17 9 11 16 12 14 13 15 10

35P677 35P678 10A6690 35P685 35P676 35P679 35P680 35P681 10A8521 35P735 35P683 35P722

Cylinder-lift, assembly, 5" 0.D. (Tab. 25-950) Consists of the following: *Tube and Base *Rod-piston Piston "U" Ring-piston "0" Ring-piston to rod, 2" 0.D Ring-retainer, piston Spacer Bushing-piston rod and cylinder top Ring-wiper, in cap Ring-retainer "0" Ring-top, 4-1/2" 0.D Cap-cylinder Gasket-cylinder cap Top-cylinder end *NOTE: Order parts by serial number of mast plus MFH and OAHL.

8

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

TRIPLEX MAST - TRI-LO (KNICKERBOCKER) 2500# and 3000# MSA 20-25, Bdles. 2005 thru 2008 (Tab. 2319) MSB 20-25, Bdles. 3071 thru 3080 (Tab. 2319) MSA & MSB 30-35, Bdles. 4012 thru 4021 (Tab. 2528) MA & WC20-30S, Bdles. 4358 thru 4367 (Tab. 2530) MA & WC30, Bdles. 4380 thru 4390 (Tab. 2535) 2500# 3000# 1

35P2298 35B5054

2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 35 36 37 38 39 40

41

35A6366 35A4046 35A5727 35P2299 35P2300 35P1612 35P1667 35P1160 35P1657 35P2302 35P2303 35P2304 35P1649 35P1650 35P1651 35P1652 35P2306 35P1654 35P2312 35P2314 35P1649 35P1651 35P2308 35P2307 35P2305 35P651 35P2310 35P2311

35P2315 35P2316 35P2347 35P2313 35P2317 35P2318 35P2319 35P2320

35P2326

*Rail-outer assembly Includes cap and bolts: Cap-bearing, on outer rail, MSA & MSB Cap-bearing, on outer rail, MA & WC 50A4629 Fitting-grease, 1/8" straight 50A1169 Bolt-12 pt., 1/2"-13 x 2-1/2", MSA & MSB Bolt-12 pt.,5/8"-11 x 2-3/4", MA & WC Bushing-axle, MSA & MSB Bushing-axle, MA & WC *Rail-center assembly *Rail-inner assembly Pad-wear Anchor-chain, outer rail and turnbuckle Pin-chain anchors 50A3818 Pin-cotter, 1/16" x 1/2" Anchor-chain, inner rail *Rod-lift Nut-hex, anchors and rods (Knickerbocker 15-190)...

Turnbuckle-rod *Chain-lift, 5/8" pitch, No. BL534 Roller-chain, lower, center rail Roller-inner Bearing-roller Washer-thrust, inner Washer-thrust, outer Ring-retainer, chain rollers Cross Head Fitting-grease, oiler, 1/4"-28 Roller-chain, in cross head Bearing-roller Pin-roller Rocker-inner, cross head Rocker-outer, cross head Fitting-grease, 1/4"-28 x 65 ° Lock-rocker Screw-lock, 5/16"-18 x 1/2" Arm-rocker Roller-arm, cross head 50A4751 Nut-lock, roller, 1/2"-20 50A2707 Washer-lock Screw-stop, inner rail, 1/2"-20 x 3/4", Allenhead.

Stop-rail Screw stop, flat head, 1/2"-20 x 1" *Cylinder-lift, see breakdown on page 12 *Cylinder-lift, see breakdown on page 12 Ring-retainer, cylinder to cross head Fitting-vent, cylinder *Tube-vent, cylinder end *Hose-vent, cylinder Tube-vent, truck end 50A2394 Nipple-toe, 1/8" x 1-1/2" GM144117 Elbow-nipple, 1/8" x 45 ° 50A4305 Clamp-hose, 5/8" Adapter-cylinder feed 10

1

1

2 2 2 4 4 2 2

2 2

2 4 4

1 1

1 1

32 4

32 4 8 16 2 2 8 2 4 2 2 2 2 2 2

8 16

2

2 8 2 4 2 2 2 2 2 2

2

2

1

1

4 2 2 2 2

4

2

2 2 2 2 2

2 2 2 2 2 2 2

2 2 2 2 2 2 2

1

1

2 2

2 2

1

1 1

1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX MAST - TRI-LO (KNICKERBOCKER) (Cont'd.)

2500# and 3000# 2500# 3000#

42 43

35P2321 35P2322

44 45 46 47

35P2325 35P2324 35P2323

48 49 50 51 52 53 53

20-7300494 35P2329 35P2331 35P2330 35P2327 35P2328 35A5301 35A14022 35A7388 35A7349 20-7300024 35A7307 35A12346 35A11249 35A1464

Elbow-feed hose *Hose-assembly, with guard *NOTE: Order parts by serial number plus MFH & OAHL. Elbow-truck end Tube-assembly Adapter-tube, truck end Carriage-mast (tab. 2464) Pin-carriage (welded to carriage) Roller-carriage Ring-snap, carriage roller Plug-carriage, side thrust Screw-adjusting, side thrust, carriage Nut-screw, insert, side thrust Pin-tilt, cylinder, std., 1-1/4" x 3-1/4" long Pin-tilt cylinder (chrome plated), 1.242 x 3-1/4" long 50A2852 Pin-roll, 1/4" x 2-1/2" Hose-vent, 1/4" x 63" Tube-vent line, 1/4 to 3/8" Hose-vent, 3/8" x 1", 24" required 50A3573 Clamp-hose, 1/4" 50A4305 Clamp-hose, 5/8" Fitting-vent, 90° 50A2394 Nipple-tank, 1/8" x 1-1/2" toe Hose-cylinder pressure line, 1/2" x 44-1/2" 50A4582 Coupling-hose, 1/2" Clamp-cylinder, hose retainer Spacer-strap

11

1 1

1 1

1 1 1 1

1 1 1 1

4 4 4 4 4 4 2 2 2

4 4 4 4 4 4 2 2 2

1 1

1 1

A.R.

A.R.

2 2

2 2

1 1 1 1 1 1

1 1 1 1 1 1

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - 2500# TRILO 3-1/4" DIAMETER 35P2316 1 2

20-7300134 20-7300135

3 4 5 6 7 8 9 10 11 12 13 14

20-7300136 20-7300137 20-7300138 35P1633 20-7300139 35P2342 35P2343 20-7300140 35P2333 35P2332 20-7300141 35P2346 20-7380035

16 17 18 19 20

35P2753 35P1670 35P1671 35P2754 10A16285

#Cylinder - lift, complete( Tab. 26-444) Includes the following parts: #Tube - cylinder, with base #Rod - piston /MOTE: Include MFH and OAHL when ordering parts.

Piston - half, upper Piston - half, upper Ring - wear, piston +"0" Ring - piston +Packing - piston Washer - piston rod, lower Nut - piston rod Head - cylinder Bushing - head Ring - retainer, cylinder head bushing +"0" Ring - cylinder head to tube +Ring - wiper, piston rod +Kit - packing and seals (includes items marked with a cross (+) Restrictor - oil, in cylinder inlet port Spring - restrictor Spacer - restrictor Fitting - restrictor retainer "0" Ring - fitting

1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

LIFT CYLINDER - 3000# TRILO 3-1/2" DIAMETER 35P2347 1 2

35P2344 35P2336

3 4 5 6 7 8 9 10 11 12 13 14 15

35P2338 35P2341 35P2337 35P1633 35P2340 35P2342 35P2343 35P2334 35P2333 35P2332 35P2345 35P2346 35P2335 35P2403

16 17 18 19 20

35P2753 35P1670 35P1671 35P2326 10A16285

#Cylinder - lift, complete (Tab•,26-452) Includes the following items: #Tube - cylinder, with base #Rod - piston /MOTE: Include MFH and OAHL when ordering parts.

Piston - half, upper Piston - half, lower Ring wear, piston +"0" Ring - piston +Packing - piston Washer - piston rod, lower Nut - piston rod Head - cylinder Bushing - head Ring - retainer, cylinder head bushing +"0" Ring - cylinder head to tube +Ring - wiper, piston rod Spacer - piston +Kit - packing and seals (includes items marked with a cross (+) Restrictor - oil, in cylinder inlet port Spring - oil restrictor Spacer - oil restrictor Fitting - restrictor retainer "0" Ring - fitting -

12

1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

14

12

11

19

13

Ref. No.

DESCRIPTION

Part No.

TRIPLEX MAST - TRI-LO (KNICKERBOCKER) Group I - With non adjustable carriage rollers 1

2 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

35P662 35P1151 35P1170 35P1152 35P1153 35P685 35P651 35P666 35P669 35P654 35P1154 35P1154A 35P1155 35P1156 35P1157 35P651 35P691 35P689 35P686 35P687 35P660 35P1160 35P734 35P661 35P734 35P1161 35P661 35P1160 35P656 35P1163 35P1164 35P1165 35P699 35P1166 35P1167 35P1138 35P1139 35P1140 35P1141 35P1144 35P1142 35P1139 35P1146 35P1145 35P1134 35P1147 35P1168

*Rail-outer assembly *Rail-center assembly *Rail-inner assembly Pad-wear *Cylinder-assembly, see page 16 for breakdown *Cylinder-assembly, see page 16 for breakdown Head-upright Bushing-head Ring-head retaining Lock-roller shaft Shaft-3" chain roller Bearing-3" chain roller Roller-chain Rocker-chain lever, R.H Rocker-chain lever, L.H Lever-rocker Shaft-chain roller Roller-chain lock Lock-roller shaft Race-bearing, roller, inner, lower Bearing, roller, inner Roller-chain Washer-thrust, bearing 50A578 Ring-bearing retainer Anchor-chain, upper Pin-anchor Lock Nut-anchor Anchor-chain, lower Lock Nut-anchor *Chain-lift, 3/4" pitch, No. AL-644 Elbow-tube to cylinder, 90 ° Anchor-chain Pin-anchor Turnbuckle-anchor chain *Rod-lift Tube-cylinder *Hose-cylinder Elbow-fuel line to tube Elbow-tube to hose Adapter-elbow to hose and tube to elbow Peg-roller Ring-bearing retainer, outer Bearing-roller Ring-bearing retainer, inner Tire-roller Cover-bearing Ring-cover retaining Shaft-roller Support-shaft Screw-shaft support GM215524-Bolt, hex., 3/8"-24 x 1-3/4" Roller-shaft Stop-channel GM444563-Plug, pipe, hydraulic tank, 1/8"-27 *NOTE: Order parts for lifts as to MFH and OAHL. .

14

No. Pcs.

MA30 MA40 MA50 1 1 1

1 1 1

32

32

1

1 4 1 2 2 2 2 1

1

4 1 2 2 2 2 1 1

2 2 2 2 2 2 2 4 2 2 4 2 2 2 4 1

2 2 2 2 1 1 1 1 2 4 4 4 4 4 4 4 4 8 4 4 4 2 1

1

1

2 2 2 2 2 2 2 4 2 2 4 2 2 2 4 1 2 2 2 2 1 1

1 1 2 4 4 4 4 4 4 4 4 8 4 4 4 2 1

-*-- 50

fi e

.15

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

LIFT CYLINDER - TRIPLEX TRI-LO LIFT (KNICKERBOCKER) Group II - Solid Piston 4000# 50000

1 1

35P1151 35P1170

2 3 4 5 6 7 8 9 9 10 11 12 13 14 15 16

35P1231 35P1233 35P1234 35P1240 35P1239 35P1238 35P1237 35P1235 35P1236 35P1232 35P1242 35P1241 35P1243 35P1244 35P683 35P680 35R134 35P685 35P1739

17

*Cylinder-lift *Cylinder-lift Each includes the following 16 parts: *Cylinder-with base *Rod-piston Nut-piston rod +"0" Ring-rod Piston-cylinder +Packing-piston Washer-piston rod Spacer-piston rod, 3" long Spacer-piston rod, 5-3/4" long Head-cylinder Bushing-head Ring-retaining, cylinder head Cap-cylinder +"O" Ring-cap +Gasket-cap (35P1245 Inter.) +Wiper-cap (35P1246 Inter.)

Kit-cylinder, packing and seals, (+) parts in kit Retainer-cylinder rod Vent-outer cylinder *NOTE: Order parts for lift as to MFH and OAHL.

16

1

1 1 1 1 1 1 1 1

1 1 1 1 1 6 1 1 1 1

1 1 1 1 1 1 1 1

1 1 1 1 1 1 6 1 1 1 1

17

13

1/

1-7

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX TRI-LO (KNICKERBOCKER) 4000# and 5000# MA and WC40, Bdle. 2919-2924 (Tab. 1093) MA and WC50, Bdle. 2926-2933 (Tab. 1095) MY40, Bdle. 2713-2719 (Tab. 2532) MY50, Bdle. 2720-2726 (Tab. 2532) 1 35B5054 35A6366 35A5727 36A682 2 3 4 5 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

35P662 35P2755 35P2752 35P1152 35P1153 35P685 35P651 35P666 35P669 35P654 35P1154 35P1154A 35P1155 35P1156 35P1157 35P651 35P691 35P689 35P686 35P687 35P660 35P1160 35P734 35P661 35P734 35P2767 35P2754 35P661 35P1160 35P656 35P1163 35P1164 35P1165 35P699 35P1166 35P1167 35P1138 35P1768 35P1139 35P1140 35P1141 35P1144 35P1142 35P1139 35P1146 35P1145

Rail-outer assembly Cap-bearing, on outer rail, MA & WC 50A4629 Fitting-grease, 1/8" straight Bolt-12 pt., 5/8"-11 x 2-3/4", MA & WC Bushing-mounting cap to axle, MA & WC Pin-upright mounting, MY40-50 #Rail-center assembly #Rail-inner assembly Pad-wear (welded to rails) #Cylinder-assembly, see page 20 for breakdown, 4000# #Cylinder-assembly, see page 20 for breakdown, 5000# Head-upright Bushing-head Ring-retaining, cylinder Lock-roller shaft Shaft-3" chain roller Bearing-3" chain roller Roller-chain Rocker-chain lever, R.H Rocker-chain lever, L.H Lever-rocker Shaft-chain roller Roller-chain Lock-roller shaft Race-bearing, inner, lower bearing Bearing-roller, inner Roller-chain Washer-thrust, bearing 50A578 Ring-bearing retainer (35P1159 Inter.)

Anchor-chain, upper Pin-anchor Lock Nut-anchor Anchor-chain, lower Lock Nut-anchor #Chain-lift, 3/4" pitch, No. AL-644 Elbow-tube to cylinder, 90 degrees Fitting-connector, cylinder to elbow Anchor-chain Pin-anchor Turnbuckle-anchor chain GM219753-Nut, hex, jam, 3/4"-16 #Rod-lift Tube-cylinder Hose-cylinder Elbow-feed line to tube Elbow-tube to hose Adapter-elbow to hose and tube to elbow Pin-roller Fitting-grease, 1/4" drive x 45 ° Ring-bearing retainer, outer +Bearing-roller +Ring-bearing retainer, inner +Roller-carriage +Cover-bearing +Ring-cover retaining +Shaft-thrust roller +Support-shaft 50A4205-Washer, plain, 7/16" I.D. x 1" 0 D

18

1

2

2 4 2 2 1 1

32

1 1 1

4 1

2 2 2 2 1 1

2 2 2 2 2 2 4 2 2 4 2 2 2 4 1 1

2 2 2 14 2 1 1 1 1

2 4 4 4 4 4 4 4 4 4 8 4

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX TRI-LO (KNICKERBOCKER) 4000# and 5000# (CONT'D) 48

35P1134

49

35P1147

+Screw-shaft support +GM215524-Bolt, hex., 3/8"-24 x 1-3/4" +Roller-thrust +Used on carriages with rollers for side thrust.

50

19

4 4 4

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX MAST - TRI-LO (KNICKERBOCKER) 4000#-5000# (Cont'd) 35P3127 35P3129 35P3130 35P3128 35P3131 35P3132 50

35P1168 35P2761 35P2762 35P2771 35P2763 35P2764 35P2768 35P2770 35P2769

++Roller-carriage ++Stud-roller ++Ring-retainer, roller to stud ++Plug-wear, side thrust ++Screw-plug adjusting ++Nut-lock, insert ++Used on carriages with wear plugs for side thrust.

Stop-channel, see illustration on page 19 Hose-vent, 3/8" I D #Tube-assy., vent port, connects to cyl. vent fitting (4000#) #Tube-assy., vent port, connects to cyl. vent fitting (5000#) #NOTE: Include MFH and OAHL when ordering parts.

Fitting-vent port on cylinder Tube-vent, lower 50A954-Plug, pipe, hydraulic tank, 1/8"-27 Spacer-vent tubes Clamp-vent tubes Clamp-feed hose and vent tube

4 4 4 4 4 4 2

1 1 1 1 1 1 1 1 1

LIFT CYLINDER - TRIPLEX TRI-LO LIFT (KNICKERBOCKER) (Split Piston) For MY, MA & WC 4000# and 5000# 1 35P2755 +Cylinder-lift (4000#) 1 35P2752 +Cylinder-lift (50000 Each includes the following 16 parts: 2 35P2756 +Shell-with base 3 35P1233 +Rod-piston +NOTE: Order parts for lift as to MFH and OAHL. 4 35P2343 Nut-piston rod 5 35P1240 1' 1 0" Ring-rod 6 35P2749 Piston-cylinder, outer 7 35P2750 Piston-cylinder, inner 8 35P1724 Wear Ring-pistons 9 35P1238 ++Packing-piston 10 35P2342 Washer-piston rod 11 35P1235 Spacer-piston rod, 3" long (4000# cylinder) 11 35P1236 Spacer-piston rod, 5-3/4" long (5000# cylinder) 12 35P1232 Head-cylinder 13 35P1242 Bushing-head 14 35P1241 Ring-retaining, cylinder head 15 35P1243 Cap-cylinder 16 35P1244 ++"0" Ring-cap 17 35P683 IGasket-cap 18 35P680 +-+Wiper-cap 35R134 -H-Kit-cylinder, packing and seals ++NOTE: Kit includes parts identified with (++).

19 35P685 Retainer-cylinder rod 35P1739 Vent-outer cylinder 20 35P2751 Washer-restrictor 21 35P1670 Spring-restrictor 22 35P2753 Spacer-restrictor 23 35P2754 Fitting-cylinder See page 16 for lift cylinder with solid piston.

20

1 1 1 1 1 1 1 1

2 1 1 1 1 1 1 1 1 1

6 1 1

1 1 1 1 1 1

21

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

TRIPLEX UPRIGHT - TRI-LO (KNICKERBOCKER) 6000#-7000# MY60-70, Bdle. 2807 thru 2814 (Tab. 2118) 1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

35P1564 35P1169 35P2757 35P2783 35P1634 35P1573 35P1570 35P1571 35P1572 35P1574 35P670 35P1566 35P664 35P1567 35P1568 35P659 35P1128 35P1563 35P1569

26 27 28 29 30 31 32 33 34 35

35P2778 35P1579 35P1577 35P1576 35P1578 35P2330 35P2779 35P2780 35P2781 36A750

36

35A5301

35P656 36A7847 36A7848 36A7849 36A7850 36A7851 36A7852 36A7853

35P2785 37 38 39

35P2777 35P1581 35P695 35P696

40 41 42 43

35P1580 35P2782 35P2772 35P2769

+Rail-outer assembly +Rail-center assembly +Rail-inner assembly Pad-wear Pad-wear +Cylinder-assembly, see page 24 for breakdown (35P1565) Washer-cylinder, lower Ring-retainer, cylinder Head-upright Bushing-cylinder Ring-bushing retaining Bushing-head Bearing-head Bearing-roller Race-bearing, inner Roller-chain Washer-thrust, bearing Ring-bearing retainer Anchor-chain Pin-anchor +Chain-lift +Rod-lift GM219753 Nut-hex. jam, 3/4"-16 Turnbuckle-rod Carriage-assembly, (Tab. 2120), 44" Carriage-assembly, (Tab. 2120), 46" Carriage-assembly, (Tab. 2120), 48" Carriage-assembly, (Tab. 2120), 54" Carriage-assembly, (Tab. 2120), 60" Carriage-assembly, (Tab. 2120), 66" Carriage-assembly, (Tab. 2120), 72" Rack-load safety, order from WNHC Sales Fork-lifting, order from WNHC Sales Stud-carriage roller (welded to frame) Ring-bearing retainer, outer Bearing-roller Ring-bearing retainer, inner Tire-roller Plug-wear, carriage adjusting Screw-adjusting, carriage Nut-adjusting screw Fitting-grease, roller Pin-upright to frame 50A3655-Bolt, hex., 5/16" x 3/4" 50A4226-Washer, lock, 5/16" 50A4627-Fitting, grease, 1/8"-90 ° Pin-tilt cylinder to upright 50A2852-Pin, roller, 1/4" x 2-1/2" GM444824-Plug, pipe, in hydraulic tank, 3/8" +Hose-assembly, feed, with sleeve and fittings Includes the following 4 parts: Sleeve-steel coil, feed hose Hose-cylinder Adapter-hose to elbow Adapter-elbow to hose +NOTE: Order parts for lift as to MFH and OAHL. Elbow-90 ° , adapter to hose Fitting-cylinder, feed port Tube-vent Clamp-tube 22

1 1 1

12 8

1 1 1 1 1

2 1

2 4 4 4 8 4 8 8 4 2 14 2 1 1 1 1 1 1 1

4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 1 1

1 1 1 1 1 1 1 1

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

TRIPLEX UPRIGHT - TRI-LO (KNICKERBOCKER) 6000-7000 #, Cont'd 44 45

Hose - vent Fitting - vent hose to cylinder Guide - vent hose 50A4582 - Coupling, pipe, 1/2"

35P2774 35P2775 35P2776

15

18-""") 17 14 16

>13

1 1 1 1

21 9

3 24

~x19

20

n

-4-24 ( 6 ■

22

X39

22 41

19

23

40 --•-

,ice '

r-

34/ 323

-4-- 8

26 28 28 27

L

N.

•

'21.

18 1171

4

z 1617

23

7'

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - TRIPLEX TRI-LO MAST Group I - Solid Piston, For MY60-70 1

35P1565

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

35P1231 35P1583 35P1584 10A6690 35P1585 35P1586 35P1587 35P1588 35P1589 35P1590 35P1591 35P1592 35P1593 35P1594 35P683 35P1595

18 19 20 21 22 23

35A8098 10A16285 35A8103 35A8102 35A8104

*Cylinder-lift, 5-1/2", (Tab. 27-047) Includes the following 16 parts: *Shell.router, with base *Rod-piston Retaining Ring-piston rod "0" Ring-rod Piston-cylinder Packing-piston Washer-packing retainer Wear Ring-piston *Spacer-piston rod, 3-9/16" long Head-cylinder Bushing-head Ring-retainer, cylinder head Cap-cylinder "0" Ring-cap Gasket-cap Wiper-cap *NOTE: Order parts for lift as to MFH and OAHL. Body-restrictor 50A4428-Connector, restrictor "0" Ring-connector Spring-oil restrictor Washer-oil restrictor Spacer-oil restrictor

18

22- ►=,

23 20 19

24

1 1 1 1

2 1 1 1 1 1 1 1 1 1 1

6 1 1

2 2 1 1 1

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

LIFT CYLINDER - TRIPLEX TRI-LO MAST (KNICKERBOCKER) Group II - Split Piston, for MY60-70 35P2757 1 2 3 4 5 6 7 8 9 10

35P2758 35P1583 35P1584 10A6690 35P2759 35P2760 35P1686 35P2773 35P1586 35P1589

11 12 13 14 15 16 17

35P1590 35P1591 35P1592 35P1593 35P1594 35P683 35P1595 35R135

18 19 20 21 22

35P2751 35P1670 35P1671 35P2782 35P2784

+Cylinder-lift, 5-1/2" dia. (Tab. 27-362) Includes the following 16 parts: +Shell-outer, with base +Rod-piston Retaining Ring-piston rod ++"0" Ring-rod Piston-cylinder, outer Piston-cylinder, inner Ring-wear, pistons Screw-hex. socket ++Packing-piston +Spacer-piston rod, 3-9/16" long +NOTE: Order parts for lift as to MFH and OAHL. Head-cylinder Bushing-head Ring-retainer, cylinder head Cap-cylinder ++"0" Ring-cap ++Gasket-cap ++Wiper-cap ++Kit-cylinder, packing and seals ++NOTE: Kit includes parts identified with (++) crosses.

Washer-restrictor Spring-restrictor Spacer-restrictor Fitting-cylinder "0" Ring-fitting

25

1 1 1 1 2 1 1 2 4 1 1 1 1 1 1 1 6 1 1 1 1 1 1 1

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

TRIPLEX UPRIGHT, HIGH FREE LIFT 2500# and 3000# MSA & MSB20-25, Bdles. No. 4880 thru 4889 (Tab. 2658) MSA & MSB30-35, Bdles. No. 4920 thru 4930 (Tab. 2659) MA & WC20-25, Bdles. No. 4900 thru 4909 (Tab. 2663) MA & WC30S, Bdles. No. 4942 thru 4952 (Tab. 2664) 1

35B5054

1A lA 2 3 4 5 5 6 7 8 9 10 11 12 13 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

30 31 32 33 34 35

35A6366 35A4046 35A5727 35P1612 35P1648 20-7300486 35P1649 35P1650 35P1651 35P1652 35P1653 35P1654 35P1655 20-7300490 35P1656 35P1657 35P1658 35P1659 35P1660 20-7300491 35P1133 35P2325 20-3001300 35P1665 35P1664 35P1667 35P1656 20-6000201 20-6000202 20-6000203 20-6000204 20-6000205 20-6000206 20-6000207 20-6000208 20-6000209 20-6000210 20-6000211 20-6000212 20-7300494 35P2329 35P2331 35P2330 35P2327 35P2328

*Rail-outer, assembly Includes cap and bolt.

Cap-bearing, on outer rail, MSA & MSB Cap-bearing, on outer rail, MA & WC 50A4629 Fitting-grease, 1/8" straight 50A1169 Bolt-12 pt., 1/2"-13 x 2-1/2", MSA & MSB Bolt-12pt., 5/8"-11 x 2-3/4", MA & WC Bushing-mounting cap to axle, MSA & MSB Bushing-mounting cap to axle, MA & WC *Rail-assembly, intermediate *Rail-assembly, inner Pad-wear (welded to rails) *Cylinder-assembly, see page 28 for breakdown *Cylinder-assembly, see page 28 for breakdown Roller-chain Race-inner Bearing-roller Washer-thrust, inner Washer-thrust, outer Fitting-grease, 1/4" drive Ring-bearing retainer, outer *Chain-lift, 5/8" pitch (BL534) ;Chain-lift, 5/8" pitch (BL534) *Pin-chain, connecting Anchor-chain, lower chain Plate-chain anchor, upper 50A3697 Bolt-hex, 5/8"-11 x 2-1/2" 50A1912 Nut-hex, 5/8"-11 Elbow-cylinder inlet, 90 ° Fitting-hose to elbow *Hose-cylinder feed line *NOTE: Include MFH and OAHL when ordering parts.

Clamp-hose Elbow-feed hose inlet, 90 ° Elbow-pressure line to upright elbow, 90 ° , 29/64 orifice Guide-cylinder, top of cylinder Screw-guide retainer Anchor-chain, upper chain Pin-chain to anchor Carriage-assembly, (Tab. 0019) 32" Carriage-assembly, (Tab. 0019) 34" Carriage-assembly, (Tab. 0019) 36" Carriage-assembly, (Tab. 0019) 38" Carriage-assembly, (Tab. 0019) 40" Carriage-assembly, (Tab. 0019) 42" Carriage-assembly, (Tab. 0019) 44" Carriage-assembly, (Tab. 0019) 46" Carriage-assembly, (Tab. 0019) 48" Carriage-assembly, (Tab. 0019) 50" Carriage-assembly, (Tab. 0019) 52" Carriage-assembly, (Tab. 0019) 54" Pin-roller, (welded to carriage) Roller-carriage Ring-retainer, carriage roller (Tru-ARC) Plug-carriage, side thrust Screw-adjusting, side thrust Nut-adjusting screw

26

2500# 3000# 1 1 2 2 2 2 2 2 4 4 4 4 2 2 2 2 1 1 1 1 38 38 1 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4

4 4 4 4 2 2 4 4 4 4 1 1 2 2 1 1 2 2 1 1 1 1 1 1 1 1

4 4 4 4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 4

4 4 4 4 4 4 4 4 4 4

(0

11 it

27

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER FOR TRIPLEX (KNICKERBOCKER) HIGH FREE UPRIGHT For 2500# and 3000# 1 1

2500# 35P1648

3000# 20-7300486

2 3 4

35P1711 20-7300495 35P1713

20-7300487 20-7300488 20-7300489 20-7300492

5 6 7 8

20-7300496 20-7300760 20-7300761 35P1725

20-7300496 20-7300760 20-7300761 35P1725

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

35P1727 35P1729 35P1728 35P1726 35P1724 35P1731 35P1732 35P1733 35P717 20-7300193 35P705 35P714 35P718 35P1730 35P1734 35P1736 35P1735 35P1723 35P1718 35P1719 20-7380059 35P1720 35P1721 35P1722 35P1737 35P2753 35P1670 20-7300759 10A16285 50A5109 35P1659

35P1727 35P1729 35P1728 35P1726 35P1724 35P1731 35P1732 35P1733 35P717 20-7300193 35P705 35P714 35P718 35P1730 35P1734 35P1736 35P1735 35P1723 35P1718 35P1719 20-7380059 35P1720 35P1721 35P1722 35P1737 35P2753 35P1670 20-7300759 10A16285 50A5109 35P1659

29 30 31 32 33 34 35 36 37 38

*Cylinder-lift, assembly, 5" dia. (Tab. 26-079). *Cylinder-lift, assembly, 5" dia. (Tab. 26-350).

Each includes Ref. Nos. 2 thru 31: *Tube-cylinder, outer with base *Tube-interstage, less piston *Tube-plunger, inner *Spacer-plunger *NOTE: Order parts for cyl. giving serial no. an upright plus MFH and OAHL. Piston-interstage tube "0" Ring-piston Retainer-piston **Packing-set, outer cyl., lower section, 4-1/2" O.D Nut-packing, lower section Screw-set, packing nut **Ring-wiper, packing nut Spacer-packing Ring-wear, outer cylinder Ring-stop, outer cylinder, bottom section Ring-retainer, stop ring, inner Ring-retainer, stop ring, outer **Packing-set, outer cylinder, top section,4"O.D Ring-back-up, packing Nut-packing, top section, outer **Ring-wiper, upper packing nut **"0" Ring-upper packing nut, 5-1/4" O.D **Packing-set, plunger to interstage, 3" O.D. .

Gland-plunger packing **"0" Ring-plunger gland, 3-1/4" O.D **Ring-wiper, plunger gland Ring-wear, plunger to interstage, upper Cap-interstage, upper **Ito" Ring-interstage cap, 4-1/8" O.D **Kit-packings and seals ** included in kit Washer back-up, interstage cap Screw-vent, interstage cap Washer-seal, vent screw Plug-pipe, in chain roller shaft Washer-restrictor Spring-oil restrictor Spacer-restrictor "0" Ring-plug, in end of cylinder Plug-cylinder, hex, head, 7/8"-14 Fitting-feed port, in lower end of cyl., 90 ° ..

28

1 1 1 1 1 1 1 1 1 1 1 1 1 1

2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 1 1 1 1 1 1

1111111111111

0

r

36

34 38

29

33

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

TRI FREE MAST - HIGH FREE LIFT (KNICKERBOCKER) 4000# For Model D324 Lift Truck, Bdles. 0409-0837 (Tab. 919) 1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

*Rail-outer, assembly *Rail-inner, assembly *Rail-center, assembly 35P662 Pad-wear 35P721 *Cylinder-lift, see breakdown on page 32 35P686 Roller-chain 35P691 Race-bearing 35P689 Bearing-roller 35P687 Washer-bearing, inner 35P688 Washer-bearing, outer 35P653 Screw-piston rod anchor 35P733 Screw-roller 35P698 Washer-lock GM109354-Fitting, grease, 1/8"-90 ° *Chain-lifting, 3/4" Pitch, No. AL 644 35P661 Anchor-chain, 3/4" Pitch chain 35P734 Nut-anchor 35P1160 Pin-chain anchor 35P652 Plate-end, carriage spindle 35P663 Screw-end plate 35P690 Spacer-cylinder to inner channel 35P692 Screw-spacer Hose-cylinder 35P696 Adapter-hose to elbow 35P695 Adapter-hose to tube 35P699 Elbow-tube to adapter, 90 ° 35P693 Tube-cylinder 35P694 Connector, tube to cylinder in feed port 35P661 Anchor-chain, upper 35P1160 Pin-anchor GM219753-Nut, hex, jam, 3/4"-16 35P661 Anchor-chain, lower 35P1160 Pin-anchor 35P675 Bearing-roller 35P674 Shaft-roller *NOTE: Order by serial number of mast plus MFH and OAHL. ,

30

1 1 1

18 1

4 4 4 4 4 4 4 2 2 4 4 4 4 2 4

1 1 1 1 1 1 1 1

2 2 4 2 2 4 4

2

21

11 17 18

15

7

31

31

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX TRI FREE LIFT CYLINDER 1

35P721

2 3 4

35P740 35P741 35P742

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

35P713 35P716 35P739 35P715 35P712 35P719 35P720 35P701 35P703 35P704 35P152 35P717 35P705 35P718 35P714 35P706 35P709 10P1364 35P708 35P711 35P710

*Cylinder-lift, assembly, (Tab. 25-533A) Includes the following 24 parts: *Tube-cylinder, outer *Tube-interstage *Tube-plunger, inner *NOTE: Order parts by part number plus MFH and OAHL. Packing Set-outer cylinder, lower section Nut-packing, lower section Screw-set, packing nut Ring-wiper, packing nut Ring-wear, outer cylinder Ring-stop, outer cylinder, bottom section Ring-snap, stop ring Packing Set-outer cylinder, top section Nut-packing, top section, outer cylinder Ring-wiper, upper packing nut "0" Ring-upper packing nut, 5-1/4" O.D Packing Set-plunger to interstage Gland-plunger packing "0" Ring-plunger gland, 4-1/4" O.D Ring-wiper, plunger gland Ring-wear, plunger to interstage, upper Cap-interstage, upper "0" Ring-interstage cap, 4-1/8" O.D Washer-back-up, interstage cap Screw-vent, interstage cap Washer-seal, vent screw

32

1

1 1 1 1 1 1 1

2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

33

Ref. No.

Part No.

DESCRIPTION

TRIPLEX MAST - HIGH FREE LIFT (Knickerbocker) Group I Used on 4000# lift to Mast Serial No. 3FL-399, Inc. Used on 5000# lift to Mast Serial No. 3FL-5-399, Inc. 1 2 3 4 5 5

6 7 8

9 10

11 12 13 14 15 16 17 18 19 20 21 22 24 26 22

35P662 35P1126 35P1149 35P686 35P691 35P689 35P687 35P688 35P1127 35P733 35P661 35P734 35P1128 35P1129 35P690 35P692 35P1763 35P1131 35P1762 35P696 35P695 35P1764

24 26

35P1150 35P1773 35P696 35P695

23 25 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44

35P1148 35P1133 35P699 35P1132 35P694 35P1135 35P1128 35P656 35P1136 35P1137 35P1138 35P1139 35P1140 35P1141 35P1142 35P1139 35P1144 35P1146 35P1145 35P1134

* Rail - outer, assembly * Rail - inner, assembly * Rail - center, assembly Pad - wear (Welded to rails) *Cylinder - assembly, see page 38 for breakdown *Cylinder - assembly, see page 38 for breakdown Roller - chain Race - bearing Bearing - roller Washer - bearing, inner Washer - bearing, outer Pin - dowel Screw - roller * Chain - lifting, 1" pitch, No. AL-844 *Chain - lifting, 3/4" pitch, No. AL-644 Anchor - chain, 3/4" pitch chain Nut - anchor Pin - chain anchor Plate - end, carriage spindle 50A4923 -Screw, plate Spicer - cylinder to inner channel Screw - spacer *Hose - assembly, with guard and fittings Consists of the following 4 parts: *Hose - cylinder * Guard - hose, spiral (armor guard) Adapter - hose to elbow Adapter - hose to tube * Hose - assembly, with guard and fittings Consists of the following 4 parts: *Hose - cylinder *Guard - hose (spiral) Adapter - hose to elbow Adapter - hose to tube *NOTE: Order parts for lift as to MFH and OAHL plus serial number of mast.

Elbow Clamp - elbow Elbow - tube to adapter, 90 ° Tube - cylinder Connector - tube to cylinder Anchor - chain, upper, for 1" pitch chain Pin - anchor Turnbuckle - anchor rod Anchor - chain, lower, for 1" pitch chain Pin - anchor Peg - roller Ring - bearing retaining, inner Bearing - roller Ring - bearing, retainer, inner Cover • bearing Ring - cover retainer, outer Tire - roller Shaft - roller Support - shaft Screw - shaft support GM215524 - Bolt, hex., 3/8" -24 x 1-3/4" 34

No. Pcs.

MA30 MA 40 MA 50 1 1 1 1 1 1 32 32 1 1 4 4 4 4 4 4 ...

4 4 4 4 4 4 4 4 2 2 2 2 4 4 4 4 4 4 2 2 2 2 1 1 1 1 1 1 1 1 1

1 1 1 1 1

1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 8 8 4 4 4 4

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

TRIPLEX MAST - HIGH FREE LIFT (Knickerbocker) (Cont'd) 45

MA30 MA40 MA50 4 4 1 1

Roller - shaft GM444563 - Plug, pipe, hydraulic tank, 1/8"-27

35P1147

21 20—e

/ 25

—22

IV 2326

• fn

O

10 •' 12 (tz '-13

0,-30

3

40

dobi

'

39

(64,

No

/1 12/ 10 / , 7-8

17

9

35

28

O

13

153637 38

t-27

LY (

29

.Ref. No.

Part No.

DESCRIPTION TRIPLEX MAST - HIGH FREE LIFT (Knickerbocker) Group II Used on 4000 # lift with Mast Serial No. 3FL-400 and after.

Used on 5000 # lift with Mast Serial No. 3FL-5-400 and after.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

35P662 35P686 35P691 35P689 35P687 35P688 35P1127 35P733 35P698

35P661 35P734 35P1160 35P1129 35P653 35P690 35P692 35P1763 35P1131 35P1762 35P696 35P695 35P1764

24

35P1150 35P1773

25 26 27 28 29 30 31

35P696 35P695 35P1675 35P1148 35P699 35P1672

32 33 34 35 36 37 38 39 40 41 43 44 45 46 47 48

10A16285 35P1135 35P1160 35P656 35P1676 35P1136 35P1137 35P1138 35P1139 35P1140 35P1768 35P1141 35P1142 35P1144 35P1673 35P1674

* Rail - outer, assembly * Rail - inner, assembly * Rail - center, assembly Pad - wear (welded to rails) * Cylinder assembly, see breakdown on pages 40 or 42 Roller - chain Race - bearing Bearing - roller Washer - bearing, inner Washer - bearing, outer Pin - dowel Screw - roller Washer - lock GM109354 - Fitting, grease, 1/8" -90 ° *Chain - lifting, 1" pitch, No. AL-844 * Chain - lifting, 3/4" pitch, No. AL-644 Anchor - chain, 3/4" pitch chain Nut - anchor Pin - chain anchor Plate - end, carriage spindle Screw - plate Spacer - cylinder to inner channel Screw - spacer * Hose - assembly, with guard and fittings Consists of the following 4 parts: *Hose - cylinder * Guard - hose (spiral) Adapter - hose to elbow Adapter - hose to tube * Hose - assembly, with guard and fittings Consists of the following 4 parts: * Hose - cylinder *Guard - hose (spiral) (armor guard), NOTE: Order by serial number of lift plus MFH and OAHL. Adapter - hose to elbow Adapter - hose to tube Clamp - elbow Elbow - hose, 90 ° Elbow - tube to adapter, 90 ° Tube - cylinder 50A4428 - Connector, tube to cylinder, with o-ring "0" Ring - connector Anchor - chain, upper, for 1" pitch lift chain Pin - anchor Turnbuckle - anchor rod Bolt - turnbuckle, 3/16" x 14 x 4" GM219753 - Nut, hex., jam, 3/4"-16 Anchor - chain, lower, for 1" pitch lift chain Pin - anchor Peg - roller Ring - bearing retainer, outer Bearing - roller Fitting - grease, 1/4" drive x 50 °. (Alemite 1668) Ring - bearing, retainer to peg Cover - bearing Tire - roller Shaft - roller Support - shaft 36

No. Pcs.

MA30 MA 40 MA 50 1 1 1 1 1 32 32 1 1 4 4 4 4 4 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 4 4 4 4 4 4 2 2 2 2 1 1 1 1 1 1 1 1 1

1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 4 4 2 2 2 2 4 4 4, 4 4 4 4 4 4 4 4 4 4 4 4 4 8 8

Ref. No.

Part No.

No. Pcs.

DESCRIPTION TRIPLEX MAST - HIGH FREE LIFT (Knickerbocker) (Coned)

49 50 51 52 53 54 55 56 57 58

35P1134

35P1147 35P1669 35P1670 35P1671 10A16285

MA30 MA40 MA50 4 4 4 4

Screw - support, for grease fitting Fitting - grease (Alemite 1728-13) GM215524 - Screw, hex. head, 3/8"-24 x 1-3/4" GM173128 - Washer, shakeproof, 3/8" 50A4205 - Washer, plain, 3/8" Roller - shaft # Washer - restrictor valve # Spring - restrictor valve # Spacer - restrictor valve #50A4428 - Connector, tube # "0" Ring - connector #NOTE: Used on lifts with restrictor valves installed

8 8 4 1 1 1 1 1

24 27 25 26 28 29 / 303 -

43 39

-

37

46 40 44 45

8 8 4 1 1 1 1 1

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - TRIPLEX HIGH FREE LIFT (KNICKERBOCKER) Group III Used on 4000# lift to Mast Serial No. 3FL-399, Inc. Used on 5000# lift to Mast Serial No. 3FL-5-399, Inc. 4000# 50004

1 1

35P1126 35P1149

2 2 3 3 4 4

35P1228 35P740 35P1229 35P741 35P1230 35P742

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

35P713 35P716 35P739 35P715 35P712 35P719 35P720 35P701 35P703 35P704 35P152 35P717 35P705 35P718 35P714 35P706 35P709 10P1364 35P708 35P711 35P1722 20-7300194 35P1247

*Cylinder-lift, assembly, 6-5/8" O.D. (Tab. 25-1056) *Cylinder-lift, assembly, 6-5/8" O.D. (Tab. 25-1161) Includes the following 24 parts: *Tube-cylinder, outer *Tube-cylinder, outer *Tube-interstage *Tube-interstage *Tube-plunger, inner *Tube-plunger, inner *NOTE: Order parts for lift as to MFH and OAHL. +Packing Set-outer cylinder, lower section Nut-packing, lower section Screw-set, packing nut +Ring-wiper, packing nut Ring-wear, outer cylinder Ring-stop, outer cylinder, bottom section Ring-snap, stop ring +Packing Set-outer cylinder, top section Nut-packing, top section, outer cylinder +Ring-wiper, upper packing nut +"0" Ring-upper packing nut, 5-1/4" O.D +Packing Set-plunger to interstage Gland-plunger packing +"0" Ring-plunger gland, 4-1/4" O.D +Ring-wiper, plunger gland Ring-wear, plunger to interstage, upper Cap-interstage, upper +"0" Ring-interstage cap, 4-1/8" O.D Washer-back-up, interstage cap Screw-vent, interstage cap +Washer-seal, vent screw Kit-seals, includes parts with (+).

Spacer-plunger tube

38

1

1 1 1 -

1 1 1 1

1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

39

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - TRIPLEX HIGH FREE LIFT (Knickerbocker) Group IV Used on 4000# Lift Cylinders, Mast Serial No. 3FL-400 thru 3FL-468, Inc. Used on 5000# Lift Cylinders, Mast Serial No. 3FL-5-400 thru 3FL-5-452.

1 1

35P1666 35P1705

2 2 3 3 4 4 5 6 6A 7 8 9 10 11 11

35P1680 35P1707 35P1681 35P1708 35P1230 35P1710 35P1678 35P1685 35P739 35P1691 35P1679 35P1686 35P1689 35P1682 35P1683

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

35P1684 35P1690 35P1688 35P1687 35P701 35P703 35P704 35P152 35P717 35P705 35P718 35P714 35P709 10P1364 35P708 35P711 35P710 35P1247

* Cylinder - lift, assembly 6-1/8" dia. (Tab. 25-1426) * Cylinder - lift, assembly 6-1/8" dia. (Tab. 25-1477) Each includes the following 33 parts: *Tube - cylinder, outer *Tube - cylinder, outer *Tube - interstage *Tube - interstage *Tube - plunger, inner *T ube - plunger, inner Packing Set - outer cylinder, lower section +Nut - packing, lower section +Set Screw - packing nut ++Nut - packing, lower section (replaces Ref. No. 6, 6A, 9 and 10) Ring - wiper, packing nut +Ring - wear, outer cylinder, lower +Ring - wear, outer cylinder, upper +Stuffing Box - outer tube, lower end ++Stuffing Box - outer tube, lower end * NOTE: Order by serial number of lift plus MFH and OAHL. +NOTE: Used on lifts serial number 3FL-400 thru 3FL-459 and 3FL-5-452. ++NOTE: Used on lifts serial number 3FL-460 thru 3FL-468.

Ring - retaining, stuffing box, outer Ring - retaining, stuffing box, inner Sequence Valve - interstage tube Piston - cylinder, on interstage tube Packing Set - top section, outer cylinder Nut - packing, top section, outer cylinder Ring - wiper, upper packing nut "0" Ring - upper packing nut, 5-1/4" O.D Packing Set - plunger to interstage Gland - plunger packing "0" Ring - plunger gland, 4-1/2" O.D. .

Ring - wiper, plunger gland Cap - interstage, upper "0" Ring - interstage cap, 4-1/8" O.D Washer - back up, interstage cap ..

Screw - vent, interstage cap Washer - seal, vent screw Spacer - plunger tube, order by MFH and OAHL NOTE: Serial number of lift is stamped on top of outer tube on front side of Ref. No. 2.

40

4000# 1

5 000#

1

1 1 1

1

1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

41

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - TRIPLEX HIGH FREE LIFT (Knickerbocker) Group V Used on 4000 # lift cylinders, Mast Serial No. 3FL-469 and after.

Used on 5000 # lift cylinders, Mast Serial No. 3FL-5-464 and after.

1 35P1694 1 35P1706 2 35P1680 2 35P1707 3 35P1695 3 35P1709 4 35P1230 4 35P1710 5 35P1696 6 35P1698 7 35P1697 8 35P1679 9 35P1688 10 35P1687 11 35P1683 12 35P1684 13 35P1690 14 35P701 15 35P703 16 35P704 17 35P152 18 35P717 19 35P705 20 35P718 21 35P714 22 35P709 23 10P1364 24 35P708 25 35P711 26 35P710 27 35P1247

* Cylinder - lift, assembly 6-1/8" dia. (Tab. 25-1542), *Cylinder - lift, assembly .6-1/8" dia. (Tab. 25-1544) Each includes the following 29 parts: *Tube - cylinder, outer *Tube - cylinder, outer *Tube - interstage *Tube - interstage *Tube - plunger, inner *Tube - plunger, inner * NOTE: Order by serial number of lift plus MFH and OAHL. Packing Set - outer cylinder, lower section Adapter - packing, outer cylinder, lower section Nut - packing, lower section Ring - wiper, packing nut Sequence Valve - interstage tube Piston - cylinder, on interstage tube Stuffing Box - outer tube, lower tube Ring - retainer, stuffing box, outer Ring - retaining, stuffing box, inner Packing Set - top section, outer cylinder Nut - packing, top section, outer cylinder Ring - wiper, upper packing nut "0" Ring - upper packing nut, 5-1/4" O.D Packing Set - plunger to interstage Gland - plunger packing "0" Ring - plunger gland, 4-1/4" O.D. Ring - wiper, plunger gland Cap - interstage, upper "0" Ring - interstage cap, 4-1/8" O.D. Washer - back up, interstage cap Screw - vent, interstage cap Washer - seal, vent screw Spacer - plunger NOTE: Serial numbers of lift is stamped on top, outside of tube, Ref. No. 2.

42

4000# 5000# 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Ref. No.

Part No.

DESCRIPTION

TRIPLEX HIGH FREE LIFT UPRIGHT MY40 Bdles. 5008 thru 5018 MY50 Bdles. 5050 thru 5059 MA40 Bdles. 4986 thru 4996 MA50 Bdles. 5031 thru 5039 1 35B5054 35A6366 35A5727 36A682

2 3 4 5 6 7 8 9 10 11

35P662 35P1129

12 13 14 15 16

35P690 35P692 35P686 35P689 35P691 35P687 35P688 35P733 35P697 35P1127

17 18 19 20

20-7300144 35P1137

21 22 23 24 25

35P661 35P1135 35P1160 35P734 35P656

26 26

35P1676 20-7300202 20-7300145

27 28 29 30

31 31 31 31 31 31 31

20-7300146 35P699 35P1672 10A16285 3" UNDER C. (Tab. 0023) 20-6000220 20-6000221 20-6000222 20-6000223 20-6000224 20-6000225 20-6000226

No. Pcs.

(KNICKERBOCKER) (Tab. 2665) (Tab. 2666) (Tab. 2660) (Tab. 2661)

+Channel-assembly, outer Cap-mounting, MA & WC Series Bolt-12 pt. , 1/2"-13 x 2-1/2", MA & WC Series 50A4629 Fitting-lube, 1/8" straight Bushing-axle, MA & WC Series Pin-upright mounting, MY40 and 50 50A3655 Bolt-hex, 5/16"-18 x 3/4" 50A2763 Elbow-5/8" x 90 ° 50A4425 Elbow-adjustable, 5/8" x 90 ° 50A4439 Plug-sq. hd., 1/4" 50A4440 Plug-sq. hd., 3/8" +Channel assembly, center +Channel-assembly, inner Pad-wear, welded to channels Plate-support, upper chain anchor 50A4923-Bolt, hex, 3/4"-16 x 2" +Cylinder-lift, see page 46 or 47 Guide-cylinder to inner channel Screw-guide retainer Roller-chain, on cylinder and center channel Bearing-chain roller, outer Bearing-chain roller, inner Washer-retainer, inner Washer-retainer, outer Bolt-roller retainer, upper rollers Bolt-roller retainer, lower rollers Pin-dowel, upper rollers, 3/16" x 1/2" GM109354-Fitting, lube, 1/8"-90 ° +Chain-lift, 3/4" pitch, AL644 +Chain-lift, 1" pitch, AL844 Anchor-chain, on carriage Pin-chain to anchor on carriage 50A3818-Pin, cotter, 1/16" x 1/2" Anchor-chain, 3/4" pitch chain Anchor-chain, 1" pitch chain Pin-chain to anchor Nut-lock, chain anchor, 3/4"-16 Turnbuckle-chain adjusting GM219753-Nut, hex, jam, 3/4"-16 Bolt-anchor, turnbuckle +Hose-oil supply, on upright, 4000# +Hose-oil supply, on upright, 5000# +NOTE: Include MFH and OAHL when ordering parts Elbow-hose inlet, 90 ° , 7/8"-14 JIC Elbow-hose outlet Tube-cylinder inlet 50A4428-Fitting, inlet tube, in cylinder "0" Ring-fitting 5" UNDER C. (Tab. 0021) Carriage-assembly, 36" Carriage-assembly, 38" Carriage-assembly, 40" Carriage-assembly, 42" 20-6000213 Carriage-assembly, 44" 20-6000214 Carriage-assembly, 46" 20-6000215 Carriage-assembly, 48" 44

1 2 2 2 2 2 2 1 1 1 1 1 1

36 2 2 1 1 1

4 4

4 4 4 2 2 2 4 2 2 2 2 2 4 2 6 4 2 2 2 1 1

1 1 1 1 1

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX HIGH FREE LIFT UPRIGHT (KNICKERBOCKER) (Cont'd.)

31 31 31 31 32 33 34 35 36 37

20-6000227 20-6000228 20-6000229 35P3127 35P3129 35P3130 35P3128 35P3131 35P3132 35A667 35A668 35A669 35A4097

20-6000216 Carriage assembly, 50" 20-6000217 Carriage-assembly, 54" 20-6000218 Carriage-assembly, 60" 20-6000219 Carriage-assembly, 72" Roller-carriage Pin-roller Ring-retaining, roller Plug-wear, carriage side thrust Screw-plug adjusting Nut-lock, adjusting screw Fork-carriage (order from WMHC) Spring-pin Pin-stop Lever-stop Washer-stop pin 50A2832 Pin-roll, 3/16" x 1"

45

4 4 4 4 4 4 2 2 2 2 2 2

Part No.

Ref. No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - MY, MA and WC40 TRIPLEX HIGH FREE UPRIGHT (KNICKERBOCKER)

20-7300143 35P1228 20-7300189 35P1230

1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

35P713 35P716 35P739 35P715 35P719 35P720 35P701 35P703 35P704 35P152 20-7300190 20-7300191 20-7300192 35P712 35P717 20-7300193 35P705 35P714 35P718 35P709 10P1364 35P708 35P706 35P711 35P1722 20-7300194

+Cylinder - lift, complete Includes the following parts: +Tube - cylinder, outer +Tube - cylinder, intermediate +Tube - cylinder, inner +NOTE: Include MFH and OAHL when ordering parts. #Packing - outer tube to piston Gland - packing Screw - set, packing gland /Wiper - gland to outer tube Box - stuffing, bottom of outer tube Ring - retainer, stuffing box #Packing - outer tube to intermediate tube Gland - packing #Wiper - gland #"0" Ring - gland to outer tube Piston - on intermediate tube #"0" Ring - piston bore Ring - retainer, piston Ring - wear, piston #Packing - plunger to intermediate tube Ring - backup, packing Gland - packing Wiper - gland #"0" Ring - gland Head - plunger #"0" Ring - plunger head #Ring - backup, "0" ring Ring - wear Screw - vent #Gasket - vent screw Kit - packing (includes items marked #)

11 13 23 28 125

24 26

.51,231 vwf. w■mu iswA Ilww■ 12

27

\114-7( I I I

10

16 15 d V 17

22 8 9

7

`g iii;a126i147.4111111111 ANIK■n■wiiow WA

Pm II 11 17A NI PmA rzA w/A

MOMMONAMOMMEMOW*4 /'7

4 ill

I

111111171tatal.: ■ ■ ZAINNIZAINW a'AV/41 -

14

46

19 18 20

21

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - MY, MA and WC 50 TRIPLEX HIGH FREE UPRIGHT (KNICKERBOCKER) 20-7300198 20-7300199 20-7300200 20-7300201 35P1247

1 2 3 4 5 6 7 8 9

35P713 35P716 35P739 35P715 35P719 35P720 35P701 35P703 35P704 35P152 20-7300190 20-7300191 20-7300192 35P712 35P717 20-7300193 35P705 35P714 35P718 35P709 10P1364 35P708 35P706 35P711 35P1722 20-7300194

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

+Cylinder - lift, complete Includes the following parts: +Tube - cylinder, outer +Tube - cylinder, intermediate +Tube - plunger, inner +Spacer - cylinder plunger +NOTE: Include MFH and OAHL when ordering parts. #Packing - outer tube to piston Gland - packing Screw - set, packing gland #Wiper - gland to outer tube Box - stuffing, bottom of outer tube Ring - retainer, stuffing box #Packing - outer tube to intermediate tube Gland - packing #Wiper - gland #"0" Ring - gland to outer tube Piston - on intermediate tube #"0" Ring - piston bore Ring - retainer, piston Ring - wear, piston #Packing - plunger to intermediate tube Ring - backup, packing Gland - packing #Wiper - gland #"0" Ring - gland Head - plunger #"0" Ring - plunger head #Ring - backup, "0" ring ....

Ring - wear Screw - vent #Gasket - vent screw Kit - packing (includes items marked #)

11 13 28 27

21325 24 26

io:

-

;-111

\.141 W

10

16 15 4 17

17

7

■WAIWAINVAIIIIVANINIWAINWAWMAII

%AIM= WAIMIIIMINIII/

47

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

I AI

All111111MIN AmmimmimmommmEmmmmimmirmilmmimmiamiiiimmommillrOW7 WANIVAIWAIIIVAIM 14

1 1 1 1

22 8 9

■WAIMIWZAWEWA110% vi• 6i, "■ 4.44

12

1

I1

111.111

21 -

19 18 20

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX HIGH FREE LIFT UPRIGHT (KNICKERBOCKER) MA6OH, 70, 80, Bdles. 6865 thru 6883 (Tab. 0240) MY60-70A Bdles. 5070 thru 5081 (Tab. 2662) MY60-70B Bdles. 7579 thru 7589 (Tab. 0468) 1

+Channel-assembly, outer Cap-mast mounting, for MA and MYB 50A4629 Fitting-lube, 1/8" Bolt-cap, 12 pt., 5/8"-11 x 4", for MA and MYB 35A12903 50A4225 Washer-bolt Bushing-axle, mast mounting, for MA and MYB 35A12904 Pin-upright, mounting to frame, MY60-70A 36A750 Pin-tilt, MY60-70A 35A5301 Pin-tilt, MA and MYB 20-6007039 50A3666 Bolt-hex, 3/8"-16 x 1" +Channel-assembly, center +Channel-assembly, inner Pad-wear, outer channel (welded) 35P1564 Pad-wear, center and inner channels (welded) 35P662 20-7300961 +Cylinder-lift Pin-cylinder, top 20-7300972 Screw-cylinder retainer, upper end 20-7300147 Roller-chain, upper, on cylinder 20-7300304 Roller-chain, lower, on inner rail 20-7300149 Bearing-chain roller, outer 20-7300150 Bearing-chain roller, inner 20-7300151 Washer-bearing and roller retainer 20-7300152 Ring-retainer, roller 20-7300153 Fitting, lube, chain rollers, 1/4" x 45 ° +Chain-lift, around cylinder rollers, 1" pitch +Chain-lift, around lower rollers, 1-1/4" pitch Anchor-chain, upper, 1-1/4" pitch chain 20-7300154 Anchor-chain, lower, 1-1/4" pitch chain 20-7300155 Nut-lock, chain anchor 35P734 Pin-chain to anchor 20-7300156 Anchor-chain, 1" pitch chain 20-7300971 Nut-lock, chain anchor 35P734 Pin-chain to anchor 35P1128 Turnbuckle-chain adjusting 35P656 GM219753-Nut, hex, jam, 3/4"-16 +Hose-oil supply, on mast 20-7300158 +NOTE: Include MFH and OAHL when ordering parts.

Elbow-hose to cylinder tube, 90 ° 35P1166 Fitting-adapter, pressure line to upright, 45 ° 20-7300973 Tube-cylinder inlet 20-7300970 Elbow-tube to cylinder inlet fitting 35P2767 Fitting-inlet tube, in cylinder 35P2754 Clamp-hose 35P1675 Hose-lift cylinder, 1/2" x 58", MY60-70B 35A12627 GM444824 Plug-pipe, 3/8" 50A3655 Bolt-hex, 5/16"-18 x 3/4" 50A4627 Fitting-lube, 1/8" x 90 ° 50A2852 Pin-roll, 1/4" x 2-1/2" Decal-High Free Lift 35A8821 3" UNDER C. 5" UNDER C. Carriage-assembly, 44" 20-6003345 20-6002953 20-6000230 Carriage-assembly, 48" 20-6002954 20-6000231 Carriage-assembly, 54" 20-6002955 20-6000232 Carriage-assembly, 60" 20-6002956 20-6000233 Carriage-assembly, 66" 20-6000234 Carriage-assembly, 70" 20-6002957 20-6000235 Carriage-assembly, 72" (Tab. 0248) (Tab. 0025) Pin-carriage (welded to carriage) 35P2778 35B12906

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 20 23 24 25 26 27 28 29 30 31 32

33 33 33 33 33 33 33 34

48

1

2 2 4 4 2 2 2 2 2 1 1

8 24 1 1 1

2 2 4 4 8 4 4 2 2 2 2 4 4 4 4 4 2 2 1 1

2

1 1 1 1 1 1

2 2 2 2 1 1 1 1 1 1 1

4

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

TRIPLEX HIGH FREE LIFT UPRIGHT (KNICKERBOCKER) (Cont'd) 35 36 37 38 39 40 41

35P1578 35P1577 35P1576 35P1579 35P2330 35P2779 35P2328 20-7301255 35A667 35A668 35A669 35A4097

Roller-carriage (tire) Bearing-roller Ring-retainer, bearings and roller Ring-retainer, bearings and roller Plug-wear, carriage side thrust Screw- plug adjusting Nut-lock, adjusting screw *Guard-chain, on upper roller *NOTE: 2-20-7300152 washer (#13 not used with chain guard.)

Fork-carriage (order from WMHC) Spring-pin Pin-stop Lever-stop Washer-stop pin 50A2832 Pin-roll, 3/16" x 1"

34

36 35 41

40

49

4 8 4 4 4 4 4 2 2 2 2 2 2 2

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

LIFT CYLINDER - MY60, 70 and MA6OH, 70, 80 TRIPLEX HIGH FREE UPRIGHT (KNICKERBOCKER) Group I - With side inlet pressure line 20-7300162 1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

20-7300163 20-7300164 20-7300165 20-7300166 20-7300167 20-7300168 20-7300169 20-7300170 20-7300171 20-7300172 20-7300173 20-7300174 20-7300175 20-7300176 20-7300177 20-7300178 20-7300179 20-7300180 20-7300181 20-7300182 20-7300183 20-7300184 20-7300185 20-7300186 20-7300187

+Cylinder-lift, complete, 8" 0.D. (Tab. 27-500) Includes the following 24 parts: +Tube-cylinder, outer +Tube-cylinder, intermediate +Tube-plunger, inner, (with side inlet feed line) +NOTE: Include MFH and OAHL when ordering parts. #Packing-outer tube to piston Adaptor-packing Gland-adaptor and packing Screw-set, packing gland Niper-gland to outer tube Box-stuffing, bottom of outer tube #Packing-outer tube to intermediate tube Adaptor-packing Gland-packing, upper end of outer tube #Wiper-gland Piston-intermediate tube #"0" Ring-piston bore Ring-retainer, piston #Packing-plunger tube to intermediate tube Adaptor-plunger packing Gland-packing, bottom of intermediate tube #Wiper-gland Head-plunger #"0" Ring-plunger head Screw-vent #Gasket-vent screw Kit-packing (includes parts marked with a #)

12 10 11 2423 2122

Ail MI NMI I I I I I Mte! ,

16 14 15

m

18 17

50

19 20

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - MA6OH, 70, 80 and MY60-70B TRIPLEX HIGH FREE UPRIGHT (KNICKERBOCKER) Group II - With bottom inlet pressure line 20-7300961 1

20-7300962 20-7300963 20-7300964

2 3

20-7300166 20-7300167 20-7300966 20-7300169 20-7300967 20-7300965 20-7300172 20-7300173 20-7300174 20-7300175 20-7300969 20-7300177 20-7300178 20-7300179 20-7300968 35P703 35P152 35P704 20-7300183 20-7300184 20-7300185 20-7300186 20-7300974

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

22 23 25

1

+Cylinder-lift, complete, 8" 0.D. (Tab. 27-936) Includes the following 24 parts: +Tube-cylinder, outer +Tube-cylinder, intermediate +Tube-plunger, inner, (with bottom inlet pressure line) +NOTE: Include MFH & OAHL when ordering parts. #Packing-outer tube to piston Adaptor-packing Nut-adaptor and packing Screw-set, packing gland Niper-gland to outer tube Stop-stuffing, bottom of outer tube #Packing-outer tube to intermediate tube Adaptor-packing Gland-packing, upper end of outer tube #Wiper-gland Piston-intermediate tube #"0" Ring-piston bore Ring-retainer, piston #Packing-plunger tube to intermediate tube Adaptor-plunger packing Gland-packing, bottom of intermediate tube #"0" Ring-gland Niper-gland Head-plunger #"0" Ring-plunger head Screw-vent #Gasket-vent screw Kit-packing (includes parts marked with a #)

1(.78

12 10 11 13

41/AFAIMFAIIVAIR AlVA I P7M/ I

*.■

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9

6

I E ESMIIIMVA 7 5k . uslimiALW ''‘41•\ § I I I PM IVAer 41111VAIWAIIIMPAIMIVAMPIMFAMIN

1 1 1

4

1111111ke

dMIWAMM,1

/ r''A r ■I 6 "PA NW/ V 7 VI W'AI I.V■

20 19

'41111v/.

21

16 14

24

pi)

0

51

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

SIMPLEX TWO RAIL MAST (KNICKERBOCKER) MY60-70, Bdles. 4447 thru 4468 (Tab. 2548) 1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

35P662 20-7300195 35P2783 35P1634 20-7300034 20-7300035 20-7300068 20-7300069 35P663 20-7300033 35P2314 20-7300120 35P670 35P1566 35P1567 35P1568 20-7300038 20-7300039 20-7300041 20-7300040

24

20-7300042

25 26 27 28 28 28 28 28 28

20-7300044 20-7300045 20-7300043 36A11799 36A11780 36A11781 36A11782 36A11783 36A11784

29 30 31 32 33 34 35

35P2778 35P1578 35P1577 35P1576 35P1579 35P2330 35P2779 35P328 35A7307 35A11895 35A11249 36A1881 36A750

35A667 35A668

+Rail-outer, assembly +Rail-inner, assembly Pad-wear (welded to rails) +Cylinder-lift, complete (see page 54 for parts) Washer-cylinder base, spacer Ring-retaining, cylinder base Fitting-connector, cylinder base Elbow-hose, 45 ° Guide-cylinder head, R.H Guide-cylinder head, L.H Screw-countersunk head, guide to rail Head-cylinder 50A4923-Bolt, hex, 3/4"-16 x 2" 50A4232-Washer, lock, 3/4" Fitting-grease, cylinder head guide Roller-chain, on cylinder head Bearing-roller Race-inner, bearing Washer-thrust, chain roller Ring-retaining, chain roller to head +Rod-anchor, chain GM219753-Nut, hex, 3/4" Turnbuckle-chain adjusting Anchor-chain Pin-chain anchor Pin, cotter +Chain-lift +NOTE: Include MFH and OAHL when ordering parts.

Tube-vent Fitting-vent tube Clamp-vent tube Carriage-assembly, (Tab. 2556), 42" Carriage-assembly, (Tab. 2556), 48" Carriage-assembly, (Tab. 2556), 54" Carriage-assembly, (Tab. 2556), 60" Carriage-assembly, (Tab. 2556), 66" Carriage-assembly, (Tab. 2556), 72" Includes the following part: Stud carriage rollers (welded to carriage) Roller-carriage Bearing-roller Ring-snap, in roller Ring-retaining, roller to pin Plug-wear, side thrust (in roller pin) Screw-adjusting, side thrust plug Nut-lock, adjusting screw Fitting-vent, 1/4" x 90 ° Hose-vent, 1/4" I.D. x 44" 50A3573 Clamp-hose, 7/16" Clamp-cylinder hose, 5-1/4" dia.

50A4556 Bushing-reducer, 3/8" to 1/4" Pin-tilt 50A3646 Bolt-hex, 1/4"-20 x 3/4" 50A4629 Fitting-grease, 1/8" straight Pin-upright mount 50A3655 Bolt-hex, 5/16"-18 x 3/4" Fork-carriage (order from WMHC) Includes the following 4 parts: Spring-pin Pin-stop 52

1 1

24 1 1 1 1 1 1 1

4 1 1 1

2 2 2 2 4 2 2 6 2 4 4 8 2 1 1 1 1 1 1 1 1 1

4 4 8 4 4 4 4 4 1 1

2 2 1

2 2 2 2 2 2 2 2

Ref . No.

Part No.

No. Pcs.

DESCRIPTION SIMPLEX TWO RAIL MAST (KNICKERBOCKER) - CONT'D

35A669 35A4097

Lever - stop pin Washer - pin 50A2832 Pin-roll, 3/16" x 1".

2 2 2

10

4

24

22

23

20

21

28

53

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

LIFT CYLINDER FOR TWO RAIL MAST MY60-70 (KNICKERBOCKER) 1

20-7300195

2 3 4 5 6 7 8 9 10 11

20-7300196 20-7300197 35P2343 35P1240 35P2749

12 13 14 15 16

20-7300033 35P1591 35P1732 20-7300032 35P1244

17

35P683 35P1595 20-7380006

18 19 20 21 22 23

35P1724 35P1238 35P2342

35P2751 35P1670 35P1671 20-7300034 35P2784 20-7300035

+Cylinder-lift, complete, (Tab. 27-411) Includes parts through Ref. No. 18: +Barrel-cylinder, with base +Rod-piston Nut-piston rod ++"0" Ring-piston rod Piston-cylinder, lower, (matched set) Piston-cylinder, upper, use 35P2749 (matched set) Ring-wear, piston ++Packing-piston Washer-piston rod +Spacer-piston rod +NOTE: Include MFH and OAHL when ordering parts: Head-cylinder Bushing-cylinder head Ring-retaining, cylinder head Cap-cylinder ++"0" Ring-cylinder cap Screw, cap retainer ++Gasket-screw ++Wiper-piston rod ++Kit-packing and seals ++NOTE: Kit includes parts identified with (++) Washer-restrictor Spring-restrictor Spacer-restrictor Fitting-connector, straight "0" Ring-fitting Fitting-base, 45°

54

1 1 1 1 1 1 1

2

1 1 1 1 1 1 1 1

6 6

1 1 1 1 1 1 1 1

22 23 21 19 20

55

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

SIMPLEX TWO RAIL UPRIGHT (KNICKERBOCKER) MA70 & 80 Bdles. 5213 thru 5229 and 5358 (Tab. 0112) 1

35B12906 35A12903 35A12904 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

35P662 20-7300288 35P1634 35P2783 20-7300033 35P2314 20-7300068 20-7300069 35P663 20-7300042 20-7300040 20-7300041 20-7300039 35P734 20-7300038 20-7300120 35P670 35P1566 35P1567 35P1568 35P1776

+Rail-assembly, outer Cap-mast mount 50A4629-Fitting, lube, 1/8" straight Bolt-mounting cap, 12 pt., 5/8"-11 x 4" Bushing-mast mount cap +Rail-assembly, inner Pad-wear +Cylinder-lift (see page 58) 50A4428-Fitting, connector, cylinder base Ring-retainer, cylinder bottom Washer-spacer, cylinder bottom Head-cylinder, with chain roller pins 50A4923-Bolt, hex, 3/4"-16 x 2" Fitting-lube, chain rollers (in head) Guide-cylinder head, R.H Guide-cylinder head, L.H Screw-guide retainer, ctsk. head +Chain-lift Pin-chain to anchor Anchor-chain Turnbuckle-chain adjusting GM219753-Nut, lock, 3/4"-16 Nut-lock, chain anchor on carriage +Rod-anchor, lift chain +NOTE: Include MPH and OAHL when ordering parts.

Roller-chain, on cylinder head Bearing-chain roller Race-bearing, inner Washer-thrust, chain roller Ring-retainer, chain roller *Hose-vent, 1/4" I.D *35P1776 represents one (1) foot of hose.

50A3573-Clamp, hose, 3/8" dia Fitting-vent hose, in cylinder and tank, 1/4" x 90 ° Clamp-hose, around cylinder Spacer-hose, rubber, U-shaped Carriage-assembly, (Tab. 0088), 44" Carriage-assembly, (Tab. 0088), 48" Carriage-assembly, (Tab. 0088), 52" Carriage-assembly, (Tab. 0088), 56" Carriage-assembly, (Tab. 0088), 60" Stud-carriage rollers (welded to carriage) Roller-carriage Bearing-carriage roller Ring-retainer, in roller Ring-retainer, roller Plug-wear, carriage side thrust Screw-adjusting, thrust plug Nut-lock, adjusting screw Hose-with guard, 3/4" I.D. x 40" Includes the following part: Hose-lift cylinder, 3/4" T.D. x 40", less guard Fork carriage (order from WNHC) Includes the following 4 parts: Spring-pin Pin-stop Lever-stop pin Washer-pin 50A2832 Pin-roll, 3/16" x 1" .

26 26 26 26 26 27 28 29 30 31 32 33

35A7307 20-3000974 35A1464 20-6001024 20-6001025 20-6001026 20-6001027 20-6001028 35P2778 35P1578 35P1577 35P1576 35P1579 35P2330 35P2779 35P2328 20-3001942 35A12261 35A667 35A668 35A669 35A4097

56

1

2 2 4 2 1 VAR 1 1 1 1 1 1 2 1 1

4 2 4 4 2 4 2 2 2 2 2 4 2 2 2 2 2

1 1 1 1 1

4 4 4 4 4 4 4 4 1

1

2 2 2 2 2 2

23

11

57

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - MA70, 80 Simplex Two Rail Upright (Knickerbocker) 1

20-7300288

2 3 4 5 6 7 8 9 10

20-7300289 20-7300290 20-7300291 35P1240 35P2343 35P2342 20-7300292 20-7300293

11 12 13 14

20-7300033 35P1591 35P1732 20-7300032

16 17 18

35P683 35P1244 35P1595 20-7300294 35P2751 35P1670 35P1671

19 20 21 22 23

35P2784

+Cylinder - lift, complete , 5" O.D. (Tab. 27 -927) Includes parts through Ref. No. 23: +Barrel - cylinder +Rod - piston Piston - cylinder ++Seal - "0" ring, piston to rod Nut - piston rod Washer - piston retainer Ring - wear, piston ++Packing - piston +Spacer - piston rod +NOTE: Include MFH and OAHL when ordering parts.

Head - cylinder Bushing - cylinder head Ring - retaining, cylinder head Cap - cylinder Screw - cap retainer Gasket - retainer screw ++Seal - "0" ring, cylinder cap ++Wiper - piston rod ++Kit - packing (includes parts marked ++) Washer - restrictor Spring - restrictor Spacer - restrictor 50A4428 - Fitting, connector, straight Seal - "0" ring, connector fitting

58

1 1 1 1 1 1 1 1 1 1 1 1

4 4 1 1 1 1 1 1 1

17

22 ---0-

1

59

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

SIMPLEX TWO RAIL MAST (KNICKERBOCKER) MA906,100, Bdles. 4760 thru 4781 (Tab. 2638)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

35B12906 35A12903 35A12904 20-7300295 20-7300310 35P1634 35P2783 20-7300296 20-7300297 20-7300298 20-7300299 20-7300300 20-7300301 20-7300302 20-7300040 20-7300041 20-7300039

21 22

35P734 20-7300303

23 24 25 26 27 28 29

20-7300304 20-7300150 20-7300151 20-7300152 20-7300153 35P2314 35P1776

30 31 32 33 34 34 34 34

35A7307

35 36 37 38 39 40 41 42 43 44

20-3000974 35A1464 36A14577 36A14578 36A14579 36A14580 20-7300995 20-7300305 20-7300306 35P681 20-7300307 20-7300308 20-7300309 35P3132 35P2314 20-7301255 20-3001942 35A12261

35A667 35A668 35A669 35A4097

+Rail-assembly, outer Cap-mast mounting 50A4629-Fitting, lube, 1/8" Bolt-mounting cap, 12 pt., 5/8"-11 x 4" Bushing-mast mount cap +Rail-assembly, inner Pad-wear (welded to rails) +Cylinder-lift (see page 62) Ring-retainer, cylinder bottom Washer-spacer, cylinder bottom Head-cylinder, with chain roller pins 50A4923-Bolt, hex, 3/4"-16 x 2" (cylinder top) Rod-cylinder guide Bushing-guide rod Cushion-guide rod Collar-guide rod Pin-collar and rod +Chain-lift, BL834 Pin-chain to anchor Anchor-chain Turnbuckle-chain adjusting GM219753-Nut, lock, turnbuckle and anchor rod, 3/4"-16 Nut-lock, chain anchor on carriage +Rod-anchor, lift chain +NOTE: Include MFH and OAHL when ordering parts.

Roller-chain, on cylinder Bearing-chain roller Race-bearing, inner Washer-thrust Ring-retainer, roller Fitting-lube, chain rollers *Hose-vent, order length as needed *NOTE: 35P1776 represents a foot of hose.

Fitting-vent and tank, 90 ° , 1/4"-28 50A3573 Clamp-hose, 3/8" dia.

Clamp-hose, 5 3/4" dia Spacer-hose, rubber, U-shaped Carriage-assembly, (Tab. 2704), 48" Carriage-assembly, (Tab. 2704), 52" Carriage-assembly, (Tab. 2704), 56" Carriage-assembly, (Tab. 2704), 60" Pin-carriage (welded to carriage) Roller-carriage Bearing-carriage roller Ring-retainer, in roller Ring-retainer, roller Plug-wear, side thrust Screw-adjusting, thrust plug Nut-lock, adjusting screw Fitting-lube, carriage roller 50A4428 Fitting-cylinder, straight Guard-chain, for upper roller Hose-with guard, lift cylinder, 3/4" I.D. x 40" Hose-lift cylinder, less guard, 3/4" I.D. x 40" Fork-carriage (order as needed from WMHC) Each includes the following 4 parts: Spring-pin....: Pin-stop Lever-stop .-her-stop pin 50A2832 Pin-roll, 3/16" x 1" .

60

1

2 2 4 2 1

VAR. 1 1 1 1 1

2 4 4 2 4 2 4 4 2 4 2 2

2 2 2 4 2 2 A.R. 2 2 2 2 1 1 1 1

4 4 8 4 4 4 4 4 4 1

2

1 1

2 2 2 2 2 2

32 33

44

1. j ‘

N 35 36 42 39

UST IM 44,m

, 57rir

19 22 13

41

34 O

5-

15

37

r

6 L

61

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - MA90, 100 Two Rail Simplex Upright (Knickerbocker)

1 20-7300310 2 20-7300289 3 20-7300290 4 20-7300291 5 35P1240 6 35P2343 7 35P2342 8 20-7300292 9 20-7300293 10 11 20-7300033 12 35P1591 13 35P1732 14 20-7300032 16 35P683 17 35P1244 18 35P1595 20-7300294 19 35P2751 20 35P1670 21 35P1671 22 23 35P2784

+Cylinder - lift, complete , 5" O.D. (Tab. 27-925) Includes parts through Ref. No. 23: +Barrel - cylinder +Rod - piston Piston - cylinder 11Seal - "0" ring, piston to rod Nut - piston rod Washer - piston retainer Ring - wear, piston ++Packing - piston +Spacer - piston rod +NOTE: Include MFH and OAHL when ordering parts.

Head - cylinder Bushing - cylinder head Ring - retaining, cylinder head Cap - cylinder Screw - cap retainer Gasket - retainer screw ++Seal - "0" ring, cylinder cap ++Wiper - piston rod ++Kit - packing (includes parts marked ++) Washer - restrictor Spring -restrictor Spacer - restrictor 50A4428 - Fitting, connector, straight Seal - "0" ring, connector fitting

62

1 1 1 1 1 1 1 1 1 1 1 1 1 4 4 1 1 1 1 1 1 1

17

22 --.-

1

63

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

SIMPLEX TWO RAIL MAST (KNICKERBOCKER) MA120, Bdles. 7465 thru 7486 (Tab. 0429) 1

2

35B12906

3 4 5

35A12903 35A12904

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

20-7300295 20-7300310 35P1634 35P2783 20-7300946 20-7300297 20-7300298 20-7300299 20-7300300 20-7300301 20-7300993 35P689 20-7300041 20-7300039 35P734 20-7300994

23 24 25 26 27 28 29

20-7300304 20-7300150 20-7300151 20-7300152 20-7300153 35P2314 '35P1776

30 31 32 33 34 34 34 34

35A7307

35 36 37 38 39 40 41 42 43 44

+Rail-assembly, outer Cap-mast mounting 50A4629-Fitting, lube, 1/8" Bolt-mounting cap, 12 pt., 5/8"-11 x 4" Bushing-mast mount cap +Rail-assembly, inner Pad-wear (welded to rails) +Cylinder-lift (see page 66) Ring-retainer, cylinder bottom Washer-spacer, cylinder bottom Head-cylinder, with chain roller pins 50A4923-Bolt, hex, 3/4"-16 x 2" (cylinder top) Rod-cylinder guide Bushing-guide rod Cushion-guide rod Collar-guide rod Pin-collar and rod +Chain-lift, BL834 Pin-chain to anchor Anchor-chain Turnbuckle-chain adjusting GM219753-Nut, lock, turnbuckle and anchor rod, 3/4"-16 Nut-lock, chain anchor on carriage +Rod-anchor, lift chain +NOTE: Include MFH and OAHL when ordering parts.

Roller-chain, on cylinder Bearing-chain roller Race-bearing, inner Washer-thrust Ring-retainer, roller Fitting-lube, chain rollers *Hose-vent, order length as needed *NOTE: 35P1776 represents a foot of hose.

Fitting-vent and tank, 90 ° , 1/4"-28 50A3573 Clamp-hose, 3/8" dia Clamp-hose, 5-3/4" dia.

Spacer-hose, rubber, U-shaped Carriage-assembly, (Tab. 0430), 48" Carriage-assembly, (Tab. 0430), 52" Carriage-assembly, (Tab. 0430), 56" Carriage-assembly, (Tab. 0430), 60" Each includes the following part: Pin-carriage (welded to carriage) Roller-carriage Bearing-carriage roller Ring-retainer, in roller Ring-retainer, roller Plug-wear, side thrust Screw-adjusting, thrust plug Nut-lock, adjusting screw Fitting-lube, carriage roller 50A5906 Fitting-cylinder, 90 ° Guard-chain, for upper roller Hose-with guard, 3/4" I.D. x 40" Hose-less guard, 3/4" I.D. x 40" Fork-carriage (order as needed from WMHC) Each includes the following 4 parts: Spring-pin Pin-stop Lever-stop .

20-3000974 35A1464 20-6004869 20-6004870 20-6004871 20-6004872 20-7300995 20-7300305 20-7300306 35P681 20-7300307 20-7300308 20-7300309 35P3132 35P2314 20-7301255 20-3001942 35A12261 35A667 35A668 35A669

64

1

2 2 4 2 1

VAR. 1 1 1 1 1

2

4 4 2 4 2 4 4 2 4 2 2 2 2 2 4 2 2 A.R. 2 2 2 2

1 1 1 1

4 4 8 4 4 4 4 4 4 1

2

1 1

2 2 2 2

Ref. N

Part No.

DESCRIPTION

No. Pcs.

SIMPLEX TWO RAIL MAST (KNICKERBOCKER) - CONT'D

35A4097

2 2

Washer - stop pin 50A2832 Pin - roll, 3/16" x 1"

.111■••

1

El 32

II I 33

:18

2q ••■••■■1

19 22 34

21'

4

43

Ref. No.

No. Pcs.

DESCRIPTION

Part No.

LIFT CYLINDER - MA120 Two Rail Simplex Upright (Knickerbocker) 1

20-7300754

2 3 4 5 6 7 8 9 10

20-7301210 20-7301211 20-7301213 35P1240 35P2343 35P2342 20-7300757 20-7300756

11 12 13 14

20-7301214 35P1591 20-7301212 20-7301215

16 17 18

35P683 20-7300799 35P1595 20-7300755 20-7301216 35P1670 35P1671

19 20 21 22 23

10A16285

+Cylinder - lift, complete, 5-1/2" 0.D Includes parts through Ref. No. 18: +Barrel - cylinder +Rod - piston Piston - cylinder ++Seal - "0" ring, piston to rod Nut - piston rod Washer - piston retainer Ring - wear, piston ++Packing - piston +Spacer - piston rod +NOTE: Include MFH and OAHL when ordering parts.

Head - cylinder Bushing - cylinder head Ring - retaining, cylinder head Cap - cylinder Screw - cap retainer ++Gasket - retainer screw ++Seal - "0" ring, cylinder cap ++Wiper - piston rod ++Kit - packing (includes parts marked ++) Washer - restrictor Spring - restrictor Spacer - restrictor 50A5906 - Elbow-cylinder, 5/8" x 90 ° Seal - "0" ring, cylinder elbow

66

1 1 1 1 1 1 1 1 1 1

••••

1 1 1 1

4 4 1 1 1 1 1 1 1 1