White High Free Lift Triplex 2000-5000 LB Mobilift Trucks Parts Manual – PDF Download!

PARTS CATALOG R-2216C HIGH FREE LIFT TRIPLEX I-BEAM MAST FOR ALL WHITE MOBILIFT TRUCKS 2000 TO 5000 LB CAPACITY TRIPLEX " I TT BEAM UPRIGHT CONTENTS

Upright for MSB, MA, WC & NY20-30 Uprights for MA & WC30-50 and MY40-50 Carriages for Uprights Lift Cylinder, 4" Dia. for MSB, MA, WC & NY20-30 Lift Cylinder, 4-3/4" dia. for MA & WC30-50 and MY40-50 Variable Parts Charts for Uprights

Page Page Page Page Page Page

Ell

2-3 4-7 8-9 10-11 12-15 16-18

WHITE MOTOR CORPORATION

White Materials Handling Division HOPKINS, MINNESOTA 55343 Printed in U.S.A. 6/77

Ref. No. Part No.

DESCRIPTION

No. Pcs.

UPRIGHT FOR TRIPLEX 4-3/8" "I" BEAM HI-FREE LIFT - GROUP I 2000-3000 lb. Capacity, Used on the following S/N and After MSB, 4575B3-4585B3 MA & WC20-30S, 4597B3-4607B3 MA & WC3OH, 5102B3-5112B3 MY20-30, 5838B3-5847B3

1 Rail - outer assembly, see chart page 16 2 Rail - intermediate assembly, see chart page 16 3

Rail - inner assembly, see chart page 16 4 35A14246 Pin - rail roller (welded to rails) 8 Dog - welded to outer rail and head 35A12635 4A 2 2 50A1296 Bolt-stop 3/4"-10 x 1-1/4" (in outer rail)

5 35B3709 Cap - bearing, outer rail, pivot, MSB Series 2 5 35B5054 Cap - bearing, outer rail, pivot, MA and WC 2 6 35A6790 Screw - bearing cap, MSB, 1/2"-13 x 2-1/2" 4 Screw. - bearing cap, MA and WC, 5/8"-1 1 x 2-3/4" 35A6366 6 4 2

50A4629 - Fitting, grease, 1/8" straight, in mast wunt 7 35A4046 Bushing - bearing cap, MSB 2 2 Bushing - bearing cap, MA and WC 7 35A5727 Cylinder assembly, (39A2692) chart page 16, breakdown page 10

Pin - pivot, for upright, 1-1/2" dia. MY 8 20-6001377 2 50A3655 Bolt-hex, 5/16"-18 x 3/4" 9 2 2 50A4627 Fitting-grease, 1/8" x 90°, MY

Head - cylinder 36A14308 10

2 50A1474 Bolt-head, 12 pt., 7/16"-14 x 1"

Guide - 15/32" x 2" x 2" 35A14415 12 2 50A3680 Bolt-hex, 1/2"-13 x 1-1/4" 4 4 50A4212 Washer-plain, 17/32" I.D., 1-1/16" O.D

14 35A14048 Sheave - chain, on cylinder head, 3-17/64" 0.D., 2-7/16" I.D 2 2 16 35A14046 Bearing - chain sheave, on cylinder head, 2-3/16" dia. x 1-1/4" Plate - sheave retainer, on cylinder head, 3/8" x 2-3/4" dia 20-3002962 17 2 50A6064 Pin-roll, 3/8" x 1/2" 18 2 19 2 50A4875 Screw-ctrsunk.head, 1/2"-13 x 3/4" 2 20 20-3001116 Sheave - chain, lower, 3-9/64" dia. x 2-1/4" I.D 21 36A14113 Pin - sheave, lower, R.H Pin - sheave, lower, L.H 22 36A14110

2 50A3662 Bolt-hex 3/8"-16 x 1/2"

23 35A14049 Sheave - chain, upper, 4-27/32" dia 2 24 35A12643 Pin - sheave, upper,1" x2-1/2" 2 Bearing - roller, lower and upper sheaves, 2-1/4"dia 20-3001002 25 4 2 50A3656 Bolt-hex, 5/16"-18 x 1"

26 35A14244 Roller-mast channels, 3-1/4" 8 27 20-3003423 Shim - roller, 1-3/4" dia., .010 thick A.R. Shim roller, 1-3/4" dia., .015 thick 27 20-3003424 A.R.

A.R. 27 35A14245 Shim - roller, 1-3/4" dia., .030 thick

28 20-3009195 1 Latch - 4-5/8" long (35A12674) 29 35A12639 Pin - latch, 1/2" x 3-1/4" 1 2 Washer - latch 1" O.D 35A12640 30

50A3656 - Bolt, hex., 5/16"-18 x 1" Latch - assembly, complete (36A12673) 20-6009323 31 Includes ref. #33:

1 50A4645 - Fitting, lube, 1/4"

32 35A14357 Washer - thrust, for latch, .552 x 7/8" I.D. x 1-1/4" 0.D 32 20-3000743 Washer - thrust, for latch, .245 x 7/8" x 1-1/4"0 D 33 10A8135 Ring - retaining 2 34 35A12645 Bushing - 1" O.D 2 35 35A12658 Cap - hex. head, 5/8" O.D 3 3 Plunger - latch 36 20-3003277

37 20-3003278, 3 Spring - plunger, 1-3/4" long Dog - plunger, intermediate rail 36A14114 38 1 2 50A3688 - Bolt, hex., 1/2"-13 x 3-1/4"

.

.

2

Ref . No.

Part No.

DESCRIPTION

No. Pcs.

UPRIGHT FOR TRIPLEX 4-3/8" "I" BEAM (Coned) 40 41

35A 14430

42 43

20-3001117 35A 12 770

44 45

20-6004106

46

20-6005412 35A 11103 35A 8821

Chain - lift, see chart on page 16 Anchor - chain, 3/4"-16 L.H. x 6-1/2" long 50A5962 Nut-hex, jam, 3/4"-16 L.H. Link - connector, lift chain to anchor, with cotter pin Adjuster - chain 50A5005 - Nut, jam, 3/4" -16 Rod - anchor, see chart page 16 Pin - tilt cylinder, for bushing style end,1-1/4" x 3-3/8" 50A1440 Bolt - 12 pt., 3/8"-16 x 1" Pin - tilt cylinder, for self-aligning bearing end, 1" x 3-1/4" Decal - White Decal - High Free Lift

3

2 2 2 4 2 4 2 2 2 2 2 2

Ref. No.

No. Pcs.

DESCRIPTION

Part No.

UPRIGHT FOR TRIPLEX 5-3/8" "I" BEAM HI-FREE LIFT - GROUP II 3000-5000 lb. Capacity MA & WC30-50 S/N 4619 to 4640, 7089F2 to 7112F2 Inc. MY40-50 S/N 4641 to 4662, 7115F2 to 7138F2 Inc. 1 2 3 4 4A 5 6 7 8 9 10

11 12

13 14 15 14 16 16 17 18 19 20 21 22 23 24 25 26 27 27 27 28 29 30 31 32 33 34 35 36 37 38 39

Rail - outer assembly, see chart page 17 Rail - intermediate assembly, see chart page 17 Rail - inner assembly, see chart page 17 35A12634 Pin - rail roller (welded to rails) 35A12635 Dog - welded to outer rail and cylinder head tie bar 50A1296 Bolt-stop 3/4"-10 x 1-1/4" (in outer rail) 35B5054 Cap - bearing, outer rail pivot, 2-5/8" holes, MA/WC 35A6366 Screw - bearing cap, 5/8"-11 x 2-3/4", MA/WC 35A5727 Bushing - bearing cap, MA/WC Cylinder - assembly, (39A2588) chart page 17, breakdown page 12 35A5918 Pin - pivot for upright, MY 50A1771 Pin - roll, 1/4" x 3" MY 20-6003042 ++Head - cylinder, used capscrew to retain sheaves (36A12781) NOTE: Cyl. head 20-6003042 (2 bolt) can be converted to 4 bolt using 1-20-6003811 head, 1-20-7300503 plug for cyl. and 4 -50A1 1 64 bolts, 12 pt.

35A12651 Spacer - 1-1/4" x 3" 35A12652 Guide - 2" x 2-15/16" 50A5848 Screw - flat head, hex socket, 3/4"-10 x 1-1/2" 50A3682 Bolt - hex, 1/2"-13 x 1-3/4" 50A4212 Washer, plain 17/32" x 1-1/16" 20-3000694 +Washer - thrust, on cylinder head, 2-1/4" O.D., 1-5/8" I.D 35A14048 +Sheave - chain, on cylinder head, 3-1/4" dia., 2-3/16" I.D +50A4685 Ring-retainer, 1-5/8" ext.

20-3003041 f+Sheave-chain, on cylinder head, 3-1/2" O.D., 2-7/16" I.D 35A12630 +Bearing - chain sheave, on cylinder head, 2-3/16" dia. x 1-1/4" 20-3003065 ++Bearing - chain sheave, on cylinder head, 2-7/16" dia. x 1-1/4" 20-3002962 ++Plate - sheave retainer, on cylinder head, 3/8" x 2-3/4" dia ++50A6064 Pin - roll, 3/8" x 1/2" ++50A4875 Screw - ctrsunk. head, 1/2"-13 x 3/4" +NOTE: Used with cyl. heads using 50A4685 retaining ring. ++NOTE: Used with cyl. heads using 50A4875 screws and plate.

20-3000953 Sheave - chain, lower, 3-3/8" dia. x 2-1/4" I.D 36A12636 Pin - sheave, lower, R.H 36A12637 Pin - sheave, lower, L.H 50A3663 Bolt-hex, 3/8"-16 x 5/8" 35A12668 Sheave - chain, upper, 5-15/16" dia. 2-1/4" I.D 35A12643 Pin - sheave, upper 20-3007800 Bearing - roller, lower & upper sheaves, 2-1/4" (20-3001002) 20-3007823 Washer - thrust, bearing, 1" x 2-1/2" x 1/16" thick 50A3657 Bolt-hex, 5/16"-18 x 1-1/4" 35A12631 Roller - mast channels, 3,990 diameter 20-3003274 Shim-roller, 2" dia., .005 thick 20-3003275 Shim-roller, 2" dia., .010 thick 35A12656 Shim-roller, 2" dia., .032 thick 20-3009195 Latch - 4-5/8" long (35A12674) 35A12639 Pin - latch 35A12640 Washer - latch, 1/4" x 1/2" I.D., 1" O.D 50A3656 - Bolt, hex, 5/16"-18 x 1" 36A12673 Latch - assembly, complete, includes ref. #33 50A4645 - Fitting, lube, 1/4" straight 20-3000743 Washer - thrust, for latch, 1-1/8" O.D. x .245 10A8135 Ring - retaining 35A12645 Bushing - 1" O.D 35A12658 Cap - plunger, hex head, 5/8" O.D 20-3003277 Plunger - latch 20-3003278 Spring - plunger, 1-3/4" long 36A12644 Dog - plunger, intermediate rail 50A3680 - Bolt, hex, 1/2"-13 x 1-1/4" 20-3001626 Shim - dog, 3" x 1-3/4" x 1/16" .

4

1 8 2 2 2 4 2 1 2 2 1

2 2 2 4 4 2 2 2 2 2 2 2 2 2 2 1 1 2 2 2 4 8 2 8 A.R. A.R. A.R. 2 1 1 1 2 2 2 3 3 3 1 2 1

Ref. No.

Part No.

DESCRIPTION UPRIGHT FOR TRIPLEX

40 41

35A 12 660

42 43

20-3000745 35A12770

44 45

35A12648

46 46

20-6004106 20-6005412 35A11103 35A8821

"r

No. Pcs. BEAM Group I (Coned)

Chain - lift, see chart on page 16 Anchor - chain, 3/4"-16 L. H. 50A5962 Nut - hex, jam, 3/4"-16 L.H. Link - connector, lift chain to anchor Adjuster - chain 50A5005 - Nut, jam, 3/4"-16 Rod - anchor, see chart page 16 Pin - tilt cylinder, 1-1/4" x 3-3/16" 50A5887 - Ring, retaining, 1-1/4" I.D. for 35A12648 pin Pin - tilt cylinder, for bushing style end, 1-1/4" x 3-3/8" Pin - tilt cylinder, for self-aligning brg. end, 1" x 3-1/4" 50A1440 Bolt - 12 pt., 3/8"-16 x 1" Decal - White Decal-- High Free Lift

5

2 2 2 4 2 4 2 2 2 2 2 2 2 2

Ref. No.

No. Pcs.

DESCRIPTION

Part No.

UPRIGHT FOR TRIPLEX 5-3/8" "I" BEAM HI-FREE LIFT - GROUP III 3000-5000 lb. Capacity MA & WC30-50 S/N 7089G2 to 7112G2 and after.

MY40-50 S/N 7115G2 to 7128G2 and after.

1 2 3 4

35A12634 35A12635

5 5

35B5054 20-7370043 20-3005717

6

35A6366

7

35A5727

8 9

35A5918

10 11 12

20-6003811 35A12651 35A12652

14 16 17 18 19 20 21 22

20-3003041 20-3003065 20-3002962

23 24 25

35A12668 35A12643 20-3007800 20-3007823

26 27 27 27 28 29 30

35A12631 35A12656 20-3003275 20-3003274 20-3009195 35A12639 35A12640

31

36A12673

32 33 34 35 36 37 38

20-3000743 10A8135 35A12645 35A12658 20-3003277 20-3003278 36A12644

39

20-3001626

20-3000953 36A12636 36A12637

Rail - outer assembly, see chart on pages 17 and 18 Rail - intermediate assembly, see chart on pages 17 and 18 Rail - inner assembly, see chart on pages 17 and 18 Pin - rail roller (welded to rails) Dog - welded to outer rail and cyl. head tie bar 50A1296 Bolt-stop 3/4"-10 x 1-1/4" (in outer rail) 50A3683 Bolt-hex, in cylinder base, 1/2"-13 x 2" Cap - bearing, outer rail pivot, 2-5/8" holes, MA/WC Cap - bearing, outer rail pivot, 1-1/2" & 1-5/8" hole, MA & WC Insert - mounting bolt, 1/2", 5/8"-11 x 5/8" 50A1169 - Screw, bearing cap, 1/2"-13 x 2-1/2", for 20-7370043 cap Screw - bearing cap, 5/8"-11 x 2-3/4", MA/WC 50A4629 - Fitting, grease, 1/8" straight, in mast mount Bushing - bearing cap, MA/WC Cylinder - assembly (20-9000306) chart page 17and 18, breakdown p. 14 Pin - pivot for upright, MY 50A1771 Pin-roll, 1/4" x 3", MY 50A4628 Fitting-grease, 1/4" x 90 0 , MY Head - cylinder, (4 bolt mounting to lift cylinder) Spacer - 1-1/4" x 3" Guide - 2" x 2-15/16" 50A1164 Bolt - 12 point,l/2"-13 x 1-1/4" 50A3682 Bolt - hex, 1/2"-13 x 1-3/4" 50A4212 Washer - plain, 17/32" x 1-1/16" Sheave - chain, on cylinder head, 3-1/2" O.D., 2-7/16" I.D Bearing - chain sheave, on cylinder head, 2-7/16" dia. x 1-1/4" Plate - sheave retainer, on cylinder head, 3/8" x 2-3/4" dia 50A6064 Pin - roll, heavy, 3/8" x 1/2" 50A4875 Screw-ctrsunk. head, 1/2"-13 x 3/4" Sheave - chain, lower, 3-3/8" dia. x 2-1/4" I.D Pin - sheave, lower, R.H Pin - sheave, lower, L.H 50A3663 Bolt-hex, 3/8"-16 x 5/8" Sheave - chain, upper, 5-15/16" dia. 2-1/4" I.D Pin - sheave, upper,1"dia.X2-1/2" Bearing - roller, lower & upper sheaves, 2-1/4" (20-3001002) Washer - thrust, bearing, 2-1/2" O.D 50A3657 Bolt - hex, 5/16"-18 x 1-1/4" Roller - mast channels, 3.990 diameter Shim - 2" diameter, .032 thick Shim - roller, 2" dia., .010 thick Shim - roller, 2" dia., .005 thick Latch - 4-5/8" long (35A12674) Pin - latch Washer - latch, 1/4" x 1/2" I.D., 1" O.D 50A3656 - Bolt, hex, 5/16"-18 x 1" Latch - assembly, complete Includes ref. 33: 50A4645 - Fitting, lube, 1/4" straight Washer - thrust, for latch, 1-1/8" 0.D. x .245 Ring - retaining Bushing - 1" 0.D Cap - hex head, 5/8" O.D Plunger-latch Spring - plunger, 1-3/4" long Dog-plunger intermediate rail 50A3680 - Bolt, hex, 1/2"-13 x 1-1/4" Shim - dog, 3" x 1-3/4" x 1/16" .

6

8 2 2 1 2 2 2 2 4-2 2 2 1 2 2

1 2 2 4 4 4 2 2 2 2 2 2 1 1

2 2 2 4 8 2 8 A.R. A.R. A.R. 1 1

2 1 1 1 2 2 2 3 3 3 1 2 1

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

UPRIGHT FOR TRIPLEX "I" BEAM GROUP II (Cont'd) 40 41

35A12660

42 43

20-3000745 35A12770

44 45

35A12648

46

20-6004106 20-6005412 35A11103 35A8821

Chain - lift, see chart on page 17 and 18 Anchor - chain, 3/4"-16 L.H 50A5962 Nut-hex, jam, 3/4"-16 L.H Link - connector, lift chain to anchor Adjuster - chain 50A5005 - Nut, jam, 3/4"-16 Rod - anchor, see chart page 17 and 18 Pin - tilt cylinder, 1-1/4" x 3-3/16" 50A5887 - Ring, retaining 1-1/4" I.D., for 35A12648 pin Pin - tilt cylinder, for bushing style end, 1-1/4" x3-3/8" Pin - tilt cylinder, for self-aligning brg.end, 1" x 3-1/4" 50A1440 Bolt - pin, 12 pt., 3/8"-16 x 1 Decal - White Decal - High Free Lift

7

-

2 2 4 2 4 2 2 2 2 2 2 2 2

Ref. No.

DESCRIPTION

Part No.

No. Pcs.

CAR RIAGE FOR "I" B EAM MASTS, TRIPLEX HIGH FREE LIFT 2000# 3000# -

1 1 1 1 1 1 1 1 1 1 1 1

+36A14332 +364414333 +36A14334 +36A14335 +36A14336 +36A14337 +36A14388 +36A14339 +36A14340 +36A14341

14" Below 3000#-5000# *20-6003344 36A12679 *36A12680 *36A12681 *36A12682 *36A12683 *36A12684 *36A12685 *36A12686 *36A12687 *36A12688 *36A12689

(Tab.2688) ++20-6001446 ++20-6001447 ++20-6001448 ++20-6001449 ++20-6002557 ++20-6001451 ++20-6001452 ++20-6001453 ++20-6001474

(Tab.2604) Center,Bars

**36A12842 **36A12843 **36A12844 **36A12845 **36A12846 **36A12847

(Tab.0111) 1-1 1-2 1-3 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20 21

354414247 35A12635 36A11134 35A14244 354412655 50A648 20-3000867 35A622 35A5459 50A1438 354414352 354414359 35A14354 354414355

(Tab.2629) 35A12633 35A12635 36A11134 35A12631 35A12655 50A648 20-3002263 20-3000867 35A622 35A5459 50A1438 35A12629 35A12667 10A23760 35A12654

20-3007007 35A14426 35A14427 50A1976

50A5030 50A4251 20-3007006 35A12632 35A12638 50A1753

35A668 35A669 35A667 50A2832 35A4097 354412658 20-3003277 20-3003278

35A668 35A669 35A667 50A2832 35A4097 354412658 20-3003277 20-3003278

4" Below 3000#-5000#

Carriage-assembly, 32" *20-6006578 Carriage-assembli, 34" 20-6006567 Carriage-assembly, 36" *20-6006568 Carriage-assembly, 38" *20-6006569 Carriage-assembly, 40" *20-6006570 Carriage-assembly, 42" *20-6006571 Carriage-assembly, 44" *20-6006572 Carriage-assembly, 46" *20-6006573 Carriage-assembly, 48" *20-6006574 Carriage-assembly, 50" *20-6006575 Carriage-assembly, 52" *20-6006576 Carriage-assembly, 54" Carriage-assembly, 60" *20-6006577 +NOTE: Used on MSB, MA & WC20-30S *NOTE: Used on MA and WC30-50 (Tab.0613) 2" Below Carriage-assembly, 36" Carriage-assembly, 38" Carriage-assembly, 40" Carriage-assembly, 42" Carriage-assembly, 44" ** 20-6006561 Carriage-assembly, 46" Carriage-assembly, 48" " 20-6006562 Carriage-assembly, 50" Carriage-assembly, 52" ** 20-6006563 Carriage-assembly, 56" " 20-6006564 Carriage-assembly, 60" **20-6006565 Carriage-assembly, 64" **2n-6006F6F ++POTE: Used on MY20-30.

(Tab.0605) **NOTE: Used on MY40-50.

Pin-carriage roller (welded to carriage) Dog-carriage(welded to R.H. carriage bar) Bracket-load safety, welded to carriage bars Roller-mast and carriage Washer-roller, 1-3/4" diameter Screw-flat head, 3/8" Shim-1-3/8" I.D.x 2" 0.D Plate-adjusting Roller-thrust Pin-roller Bolt-12 pt., 3/8"-16 x 3/4" Roller-thrust Shaft-roller Fitting-lube Shim-roller Bolt-hex socket, 1/4"-20 x 1" (Grade 8) Bolt-12 pt., 3/8"-24 x 1-1/4" (Grade 8) Washer-lock, external, 3/8" Washer-thrust, step washer Chain-anchor, carriage Pin-anchor, chain Ring-retaining Fork-lifting (order from WMHD Sales) Pin-fork stop, 2-1/16" long Lever-stop pin Spring-stop pin Pin-roll, 3/16" x 1" Washer-fork lock, 1/16" x 21/32" x 7/8" Cap-plunger, hex head, 5/8" Plunger-carriage Spring-plunger

8

1

16 4=-4-18 20,, 21

17

N„---

a

15

NOTE: MA & WC Carriages D4 and prior had chain anchor pin 1-1/4" below top of lower fork bar.

MA & WC carriages after E4 had chain anchor pin 4" below top of lower fork bar.

MY40-50 carriages D4 and prior had chain anchor pin mounted between fork bars.

MY40-50 carriages E4 and after had chain anchor pin 2" below top of lower fork bar.

9

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - 4" DIAMETER WITH 4 3/8" "I"-BEAM GROUP I USED ON MSB, MA, WC, AND MY20-30 SERIES 1

2 3 4 5 6 7 8 8-1 9 10 11 12 13 14 16 17 18 19 20 22 23 24 25 26 28 29 30 31 32 33 34 35 36

Cylinder - lift, complete (39A2692), See chart on page 16 Each includes Ref. #2 through 32: Shell - 41" thru 62" cylinder (must include MFH & OAHL).

Screw - button head, cylinder shell 20-7300094 Seal - button head screw 20-7300095 Retainer - threaded, wiper ring 20-7300556 Valve - relief, in plunger 35P2704 +"0" Ring - valve 35P2705 Washer - valve 20-7300093 Ring - snap, valve retainer 20-7300116 Piston - half ring 20-7300555 Ring - retaining 35P1219 Spacer primary, between shell and intermediate 20-7300446 +Ring - wiper 20-7300447 +Ring - nylon 20-7300456 +Seal 20-7300451 +Ring - back up +"0" Ring 10A11847 Tube - intermediate, for 41" thru 62" cylinder(must include MFH & OAHL) 20-7300553 +Ring - nylon, pis.ton 20-7300554 +Seal - piston Retainer - threaded, intermediate tube 20-7300559 +"0" Ring - intermediate tube 10A4729 +Back up Ring - intermediate tube 35P821 Spacer - secondary, between intermediate tube & plunger Plunger - assembly, for 41" thru 62" (must include MFH & OAHL 20-7300557 +Seal - intermediate tube 20-7300558 +Ring - nylon, intermediate tube 20-7300560 +Ring - wiper, intermediate tube Plug - plunger assembly 20-7300561 +"0" Ring - plunger assembly 10A7956 20-7300562 +Repair Kit - lift cylinder +NOTE: Contents of repair kit identified by a cross.

Valve - flow control, includes "0"-Ring seal (20-3003426) 20-3009236 Seal - "0"-Ring, valve to cylinder base 20-7300552 50A6066 Bolt-hex, 5/16"-2 x 24" 50A4202 Washer - plain, 11/32" 11/16" 0.D 50A4422 - Elbow-5/8" x 45 ° x 7/8-14 x 37° 10A16285 Seal - "0" Ring, elbow, connector, tube 35A8118 Hose-lift, cyl. to valve, 1/2" x 36" (MSB20-25) 35A12182 Hose-lift, cyl. to low valve, 1/2"x18" (MA & WC20-30S) 20-3002216 Hose-lift, cyl. to high valve,steel cord 1/2"x21"(MA/WC20-30S 35A9156 Hose-lift, cyl. to valve, 1/2" x 18" (MA & WC30) 20-3003230 Hose-lift, cyl. to valve, 1/2" x 23-1/2" (MY20-30)

10

1 1 1 1 1 1 1 1 1

2 1 A .R. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 2 1

3

1 1 1 1 1

32

33

10

11

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - 4-3/4" DIAMETER WITH 5 3/8" "I" BEAM-GROUP II Used on MA-WC30 thru 50.

Mast Serial No. 4619 to 4640 thru 7089F2 to 7112F2.

Used on MY40-50 Mast Serial No. 4641 to 4662 thru 7115F2 to 7138F2.

1

2 3 4 5 6 7 8 8-1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

20-7300094 20-7300095 20-7300501 35P2704 35P2705 20-7300093 20-7300116 20-7300089 20-7300090 20-7300086 20-7300085 20-7300084 20-7300082 35P3138 M333 20-7300079 20-7300080 20-7300081 20-7300502 35P2695 35P2696 20-7300083 20-7300115 20-7300087 20-7300088 20-7300098 10A4729 20-7380023 20-7380064

33 34 35 36 37 38 39 40 41

35A12650 20-3001932

42

35A10680

20-3001857 10A16285 20-6002895 20-3002896 20-3002892

35P1776 20-3002216

Cylinder - lift, complete (39A2588), See chart on page 17 Each includes Ref. #2 through 32: Shell - for 41" thru 62" cylinder (must include MFH & OAHL).

Screw - button head, cylinder shell Seal - button head screw Retainer - threaded, wiper ring (replaces 20-7300096) Valve - relief, in plunger -"0" Ring - valve Washer - valve Ring - snap, valve retainer Piston - half ring Ring - retaining Spacer - primary, between shell and intermediate -+Ring - wiper -+Ring - nylon - +Seal +Bearing used with 20-7300096 retainer (ref. #5) -+Ring - back up -+"0" Ring, 4-1/4" 0.D. x .139 (35P155) Tube inter. for 41" thru 62" (must inc. MFH & OAHL) -+Ring - nylon, piston -+Seal - piston used with plunger with wear ring +Bearing - , inter. tube (replaces 20-7300097) Retainer - threadd -+"0" Ring - intermediate tube -+Back up Ring - intermediate tube Spacer secondary, between intermediate tube & plunger Plunger - assembly, for 41" thru 62" (must include MFH&OAHL +Bearing - retainer, inter. tube (used with 20-7300097 ref.22 -+Seal - intermediate tube - +Ring - nylon, intermediate tube -+Ring - wiper, intermediate tube Plug - plunger assembly -+"0" Ring - plunger assembly +Repair Kit - lift cylinder with wear rings +NOTE: Contents of repair kit identified by a cross (+).

-Repair Kit-lift cylinder with out wear rings.

-NOTE: Contents of repair kit identified by a dash (-).

-NOTE: Repair kit used in lift cylinders which are less wear rings begin on MA mast serial number 4619D2 to 4640D2 thru 7089 to 7112F2. On MY mast serial number 4641D2 to 4662D2 thru 7115F2 to 7138F2.

Valve - flow control Tube - cylinder inlet, 1-3/4" long 50A4428 - Connector - straight, tube to valve Tube - feed hose 50A4422 - Elbow - 45° , tube to valve Seal - "0" ring, elbow, connector, tube #Fitting - vent, on flow control valve #Washer - fiber, fitting seal #Capscrew - special, fitting retainer #Parts included in 20-7380036 changeover kit Fitting-vent hose, on tank 50A4305 clamp-hose, 5/8" Hose-vent, 1/4", 35P1776 is 1 ft. length Hose-lift, to cylinder, steel covered, 21" (on MA and WC)

12

1 1 1 1 1 1 1

1 1 2 1 A.R. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1

3

1

2 1 1 1

2 A.R. 1

32 31 22

30

29 28 12 5 13 27 14 24 23 15 16 17 3

37

42

39 38

41 18

40

26

33 38

1,4MWV•01

35 25 34 -0-

L.- 8

11 8- 1

19 20 21 9 air

\ 1 1ih,. 11\NL \ 10

13

Ref. No.

Part No.

DESCRIPTION

No. Pcs.

LIFT CYLINDER - 4-3/4" DIAMETER with 5 3/8" "I"-Seam Group III Used on MA-WC 30 thru 50.

Mast Serial No. 7089G2 to 7112G2 and after.

Used on MY 40-50 Mast Serial No. 7115G2 to 7138G2 and after.

1

2 3 4 5 6 7 8 8-1 9 10 11 12 13 14 16 17 18 19 20 22 23 24 25 26 28 29 30 31 32 33 34 35 36

20-7300094 20-7300095 20-7300501 35P2704 35P2705 20-7300093 20-7300116 20-7300089 20-7300090 20-7300086 20-7300085 20-7300084 35P3138 35P155 20-7300079 20-7300080 20-7300502 35P2695 35P2696 20-7300115 20-7300087 20-7300088 20-7300503 10A4729 20-7380064 20-3003426 20-7300552 10A16285 20-3005176 20-3005588

Cylinder - lift, compl. (20-9000306), See chart on page 17.

Each includes Ref. #2 through 32: Shell - for 41" thru 62" cylinder (must include MFH & OAHL).

Screw - button head, cylinder shell Seal - button head screw Retainer - threaded, wiper ring Valve - relief, in plunger -"0" Ring - valve Washer - valve Ring - snap, valve retainer Piston - half ring Ring - retaining Spacer - primary, between shell and intermediate -Ring - wiper -Ring - nylon -Seal -Ring - back up -"0" Ring Tube - inter, for 41" thru 62" cyl.(must inc. MFH & OAHL) Ring - nylon, piston half Seal - piston half Retainer - threaded, intermediate tube -"0" Ring - intermediate tube -Back up Ring - intermediate tube Spacer secondary, between intermediate tube & plunger Plunger - assembly, for 41" thru 62"(Must include MFH & OAHL: -Seal- intermediate tube -Ring - nylon, intermediate tube -Ring - wiper, intermediate tube Plug - plunger assembly -"0" Ring - plunger assembly -Repair Kit - lift cylinder -NOTE: Contents of repair kit identified by a dash (-).

Valve - flow control, includes "0"-Ring seal Seal - "0"-Ring, valve to cylinder base 50A6066 Bolt-hex, 5/16"-24 x 2 1/4" 50A4422 - Elbow - 45°, tube to valve Seal - "0" ring, elbow, connector, tube Hose-lift, to cyl., 1/2" x 16-1/2" long (MA & WC) Hose-lift, to cyl., 3/4" x 27" long (MY40-50B)

14

1 1 1 1 1 1 1 1 1

2 1 A .R. 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1

2 1 1 1

32

33

10

15

VARIABLE PARTS CHART FOR "I" BEAM MAST, 4 3/8" BEAMS, TRIPLEX HIGH-FREE LIFT

OAHL MFH 65 68 71 74-1/2 78 81-1/2 83 84-1/2 88-1/2 92-1/2 96 100

135 144 153 162 171 180 184 189 198 207 216 225

Used on MSB20-35 with Mast Serial No. 4575B3 thru 4585B3 and after.

CHAIN (BL534)

INNER CYLINDER CHAIN ANCHOR OUTER INTER.

ROD LENGTH LENGTH RAIL

RAIL RAIL ASSEMBLY ASSEMBLY PITCHES (tab 0068) ( tab 2691 ( tab 2690 (tab 2689) (tab 2692) (tab 2188) 148-1/8 20-3000732 20-6003213 20-6003202 36A14360 18-3/4 35A14374 20-3002545 237 20-3000733 20-3002546 249 155-5/8 20-1/4 20-6003214 20-6003203 36A14361 35A14375 20-3000734 163-1/8 35A14376 20-3002547 261 21-3/4 20-6003215 20-6003204 36A14362 20-6003216 20-6003205 36A14363 170-5/8 20-3000735 35A14377 20-3002548 273 24-3/4 178-1/8 20-3000736 26-3/4 20-6003217 20-6003206 36A14364 35A14378 20-3002549 285 20-3000737 29-1/4 35A14379 20-3002550 297 185-5/8 20-6003218 20-6003207 36A14365 20-3000737 190-5/8 29-1/4 20-6004123 20-6004122 20-6004121 20-6004120 20-3004119 305 20-3000738 193-1/8 30-3/4 35A14380 20-3002551 309 20-6003219 20-6003208 36A14366 200-5/8 20-3000739 33-1/4 20-6003220 20-6003209 36A14367 35A14381 20-3002552 321 35A14382 20-3002553 333 208-1/8 20-3000740 35-3/4 20-6003221 20-6003210 36A14368 20-6003222 20-6003211 36A14369 215-5/8 20-3000741 38-1/4 35A14383 20-3002554 345 223-1/8 20-3000742 39-3/4 20-6003223 20-6003212 36A14370 35A14384 20-3002555 357 Used on MA-WC20-305 with Mast Serial No. 4597B3 thru 4607B3 and after.

(BL534) PITCHES LENGTH C.A. ROD LENGTH OAHL MFH OUTER RAIL INTER RAIL INNER RAIL CYL. ASSY. CHAIN ASSY (tab 0068) ( tab 0018) (tab 2690) (tab 2689) (tab 2692) (tab 2188) 20-3000732 148-1/8 18-3/4 20-3002545 237 35A14374 65 135 20-6000268 20-6003202 36A14360 20-3000733 20-1/4 20-3002546 249 155-5/8 68 35A14375 144 20-6000269 20-6003203 36A14361 20-3000734 21-3/4 20-3002547 261 163-1/8 35A14376 71 153 20-6000270 ,20-6003204 36A14362 24-3/4 170-5/8 20-3000735 20-3002548 273 35A14377 74-1/2 162 20-6000271 . "20-6003205 36A14363 178-1/8 20-3000736 26-3/4 35A14378 78 171 20-6000272 20-6003206 36A14364 20-3002549 285 29-1/4 185-5/8 20-3000737 35A14379 20-3002550 297 81-1/2 180 20-6000273 20-6003207 36A14365 29-1/4 190-5/8 20-3000737 184 20-6004124 20-6004122 20-6004121 20-300412020-3004119 305 83 30-3/4 193-1/8 20-3000738 35A14380 20-3002551 309 84-1/2 189 20-6000274 20-6003208 36A14366 200-5/8 20-3000739 33-1/4 20-3002552 321 35A14381 88-1/2 198 20-6000275 20-6003209 36A14367 20-3000740 35-3/4 20-3002553 333 208-1/8 35A14382 92-1/2 207 20-6000276 20-6003210 36A14368 20-3000741 38-1/4 20-3002554 345 215-5/8 35A14383 96 216 20-6000277 20-6003211 36A14369 39-3/4 20-3000742 35A14384 20-3002555 357 ._ 223-1/8 100 225 20-6000278 20-6003212 36A14370

OAHL MFH 65 68 71 74-1/2 78 81-1/2 83 84-1/2 88-1/2 92-1/2 96 100

135 144 153 162 171 180 184 189 198 207 216 225

OAHL MFH 69-1/4144 72-1/4 153 75-3/4 162 79-1/4 17 1 82-3/4 180 85-3/4 189 89-3/4 198 93-3/4 207 97-1/4 216 101-1/4 225

Used on MA-WC30 with Mast Serial No. 5102B3 thru 5112B3 and after.

(BL534) OUTER RAIL INTER RAIL INNER RAIL CYL. ASSY. CHAIN ASSY. PITCH LENGTH C.A. ROD LENGTH (tab 0068) (tab 0017) (t ab 2690) (tab 2689) ( tab 2692) (tab 2188) 18-3/4 20-3000732 20-3002545 237 148-1/8 35A14374 20-6000237 20-6003202 36A14360 20-1/4 20-3000733 249 155-5/8 20-3002546 35A14375 20-6000238 20-6003203 36A14361 21-3/4 20-3000734 261 163-1/8 20-3002547 35A14376 20-6000239 20-6003204 36A14362 20-300073 5 24-3/4 273 170-5/8 20-3002548 35A14377 20-6000240 20-6003205 36A14363 26-3/4 20-3000736 285 178-1/8 20-3002549 35A14378 20-6000241 20-6003206 36A14364 29-1/4 20-3000737 297 185-5/8 20-3002550 35A14379 20-6000242 20-6003207 36A14365 29-1/4 20-3000737 305 190-5/8 20-6004125 20-6004122 20-6004121 20-3004120 20-3004119 30-3/4 20-3000738 20-3002551 309 193-1/8 35A14380 20-6000243 20-6003208 36A14366 20-3000739 33-1/4 20-3002552 321 200-5/8 35A14381 20-6000244 20-6003209 36A14367 35-3/4 20-3000740 333 208-1/8 20-3002553 35A14382 20-6000245 20-6003210 36A14368 20-3000741 38-1/4 345 215-5/8 20-3002554 35A14383 20-6000246 20-6003211 36A14369 20-3000742 39-3/4 357 223-1/8 20-3002555 35A14384 20-6000247 20-6003212 36A14370 Used on MY20-30 with Mast Serial No. 5838B3 thru 5847B3 and after.

(BL534) OUTER RAIL INTER RAIL INNER RAIL CYL. ASSY. CHAIN ASSY. PITCH LENGTH C.A. ROD LENGTH (tab 0068) (tab 0103) (t ab 2690) (tab 2689) ( tab 2692) (tab 2188) 20-1/4 20-3000733 249 155-5/8 20-3002546 35A14375 20-6001364 20-6003203 36A14361 21-3/4 20-3000734 261 163-1/8 20-3002547 35A14376 20-6001365 20-6003204 36A14362 20-3000735 24-3/4 273 170-5/8 20-3002548 35A14377 20-6001366 20-6003205 36A14363 26-3/4 20-3000736 285 178-1/8 20-3002549 35A14378 20-6001367 20-6003206 36A14364 20-3000737 29-1/4 297 185-5/8 35A14379 20-3002550 20-6001368 20-6003207 36A14365 30-3/4 20-3000738 309 193-1/8 20-3002551 35A14380 20-6001369 20-6003208 36A14366 33-1/4 20-3000739 321 200-5/8 20-3002552 35A14381 20-6001370 20-6003209 36A14367 20-3000740 35-3/4 333 208-1/8 20-3002553 35A14382 20-6001371 20-6003210 36A14368 20-3000741 38-1/4 20-3002554 345 215-5/8 35A14383 20-6001372 20-6003211 36A14369 39-3/4 20-3000742 357 223-1/8 20-3002555 35A14384 20-6001373 20-6003212 36A14370

16.

VARIABLE PARTS CHART FOR "I BEAM" MAST, 5 3/8" BEAMS TRIPLEX, HI-FREE LIFT Used on MY40-50 with Mast Serial No. 4641 to 4662 thru 7115F2 to 7138F2 Inc. Chain anchor pins located between fork bars

(BL634) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR PITCHES LENGTH ROD OAHL MFH RAIL RAIL RAIL ASSEMBLY ASSEMBLY (tab 0068) (tab 2630) (tab 2617) (tab 3609) (tab 2588) (tab 31) 135 36A12831 36A12767 36A12690 35A12361 35A5807 197 147-3/4 20-3000732 67 144 36A12832 36A12768 36A12691 35A12362 20-3000921 207 155-1/4 20-3000733 70 36A12692 35A12363 35A5812 73 153 36A12833 217 162-3/4 20-3000734 36A12769 36A12770 35A12364 225 168-3/4 36A12693 35A5814 20-3000735 76-1/2 162 36A12834 36A12771 35A12365 176-1/4 80 171 36A12835 36A12694 20-3000923 235 20-3000736 36A12772 35A12366 36A12695 35A5818 243 182-1/4 83-1/2 180 36A12836 20-3000737 36A12696 35A12367 86-1/2 189 36A12837 36A12773 35A5821 255 191-1/4 20-3000738 35A5822 36A12697 35A12368 261 198 36A12838 36A12774 195-3/4 90 20-3000739 93-1/2 207 36A12839 36A12775 36A12698 35A12369 20-3000924 271 203-1/4 20-3000740 216 36A12840 36A12776 36A12699 35A12370 20-3000925 279 209-1/4 97 20-3000741 225 36A12841 36A12700 35A12371 20-300092 6 291 218-1/4 20-3000742 100 36A12777 Used on MA-WC30 thru 50 with Mast Serial No. 4619 to 4640 thru 7089F2 to 7112F2 Inc. Chain anchor pins located 1-1/4" below top of lower fork bar

(BL634) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR OAHL MFH RAIL RAIL RAIL ASSEMBLY ASSEMBLY PITCHES LENGTH ROD (tab 2614) (tab 2617) (tab 2609) (tab 2588) (tab 31) tab 0068 135 36A12756 36A12767 36A12690 35A12361 65 35A5807 197 147-3/4 20-3000732 144 36A12757 68 36A12768 36A12691 35A12362 20-3000921 207 155-1/4 20-3000733 153 36A12758 36A12769 36A12692 71 35A12363 35A5812 217 162-3/4 .20-3000734 36A12770 74-1/2 162 36A12759 36A12693 225 35A12364 35A5814 168-3/4 20-3000735 36A12771 171 36A12760 78 36A12694 35A12365 20-3000923 235 176-1/4 20-3000736 36A12695 81-1/2 180 36A12761 36A12772 35A12366 35A5818 243 182-1/4 20-3000737 84-1/2 189 36A12762 36A12773 36A12696 35A12367 35A5821 255 191-1/4 20-3000738 35A5822 35A12368 261 88 198 36A12763 195-3/4 20-3000739 36A12774 36A12697 36A12775 36A12698 35K12369 91-1/2 207 36A12764 20-3000924 271 203-1/4 20-3000740 216 36A12765 36A12776 36A12699 95 35A12370 20-3000925 279 209-1/4 20-3000741 225 36A12766 35A12371 98 36A12777 36A12700 20-3000926 291 218-1/4 20-3000742

LENGTH 18-3/4 20-1/4 21-3/4 24-3/4 26-3/4 29-1/4 30-3/4 33-1/4 35-3/4 38-1/4 39-3/4

LENGTH

(

Used on MY40-50 with Mast Serial No. 711582 to 713882 thru 711504 to 713804 Inc. Chain'anchor pins located between fork bars (BL634) CHAIN INNER CYLINDER CHAIN OUTER INTER. ANCHOR OAHL MFH RAIL RAIL RAIL RA ASSEMBLY PITCHES LENGTH ROD (tab 0324) (tab 0323) (tab 0322) (tab 0306) (tab 31 ) tab 0068 67 135 36A12831 36A12767 36A12690 20-3003096 35A5807 197 147-3/4 20-3000732 144 36A12832 36A12768 70 36A12691 20-3003100 20-3000921 207 155-1/4 20-3000733 153 36A12833 73 36A12769 36A12692 20-3003104 35A5812 217 162-3/4 20-3000734 76-1/2 162 36A12834 36A12770 36A12693 20-3003108 35A5814 225 168-3/4 20-3000735 171 36A12835 80 36A12771 20-3003112 20-3000923 235 36A12694 176-1/4 20-3000736 84 180 20-6003797 20-6003783 20-6003769 20-3003663 20-3003812 245 183-3/4 20-3000737 189 20-600379 8 20-6003784 20-6003770 20-3003664 20-3003813 257 87 192-3/4 20-3000738 90-1/2 .198 20-6003799 20-6003785 20-6003771 20-3003665 20-3003814 263 197-1/4 20-3000739 207 20-6003800 20-6003786 20-6003772 20-3003666 20-3003815 273 94 204-3/4 20-3000740 97-1/2 216 20-6003810 20-6003787 20-6003773 20-3003667 20-3003816 281 210-3/4 20-3000741 100-1/2,225 20-6003802 20-6003788 20-6003774 20-3003668 20-3002868 293 219-3/4 20-3000742

18-3/4 20-1/4 21-3/4 24-3/4 26-3/4 29-1/4 30-3/4 33-1/4 35-3/4 38-1/4 39-3/4

LENGTH

(

Used on MA & WC30-50 with Mast Serial No. 708982 to 711282 thru 708904 to 711204 & 7620D4 Inc. Chain anchor pins located 1-1/4" below top of lower fork bar

(ELE34) CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR

OAHL MFH RAIL RAIL RAIL ASSEMBLY ASSEMBLY PITCHES LENGTH ROD (tab 0325) (tab 0323) (tab 0322) (tab 0306) (tab 31 tab 0068 135 36A12756 65 '36A12767 36A12690 20-3003096 35A5807 197 147-3/4 20-3000732 144 36A12757 68 36A12768 36A12691 20-3003100 20-3000921 207 155-1/4 20-3000733 71 153 36A12758 36A12769 36A12692 20-3003104 35A5812 217 162-3/4 20-3000734 74-1/2 162 36A12759 36A12770 36A12693 20-3003108 35A5814 225 168-3/4 20-3000735 171 36A12760 78 36A12771 36A12694 20-3003112 20-3000923 235 176-1/4 20-3000736 82 180 20-6003827 20-6003783 20-6003769 20-3003663 20-3003812 245 183-3/4 20-3000737 83 184 '20-6006475 20-6006473 20-6006474: 20-3006476. 35A5820 251 188-1/4 20-3000737 85 189 20-6003828 20-6003784 20-6003770 20-3003664.'20- 3003813'257 192-3/4 20-3000738 88-1/2 198 20-6003829 20-6003785 20-6003771. 20-3003665'. 20-3003814.263 197-1/4 20-3000739 207 .20- 6003830 20-6003786 20-6003772, 20-3003666.20-3003815 273 92 204-3/4 20-3000740 95-1/2 216 20-6003831 20-6003787 2 0-600377320-3003667 20-3003816 281 210-3/4 20-3000741 98-1/2 _225_20-6003832 _207.6003788 .„20-6003774._20-3003668_ 2 0-1002868 293 _ 219-3/4_ 20-3000742 ,

18-3/4 20-1/4 21-3/4 24-3/4 26-3/4 29-1/4 30-3/4 33-1/4 35-3/4 38-1/4 39-3/4

LENGTH

)

.

17

18-3/4 20-1/4 21-3/4 24-3/4 26-3/4 29-1/4 29-1/4 30-3/4

33_ 1/4 -

35-3/4 38-1/4 39-3 /4

VARIABLE PARTS CHART FOR "I" BEAM MASTS, 5-3/8" BEAMS TRIPLEX, HI-FREE LIFT

Used on MY40-50 with Mast Serial No. 7115E4 to 7138E4 and after Chain anchor pins located 2" below top of lower fork bar

CAUL

67 70 73 761/2 80 84 87 90 2 94 971/2 1001/2

MFH 135 144 153 162 171 180 189 198 207 216 225

OUTER INTER. INNER CYLINDER RAIL RAIL RAIL ASSEMBLY (Tab 0324) (Tab 0323) (Tab 0322) (Tab 0306) 20-3003096 36A12690 36A12767 36A12831 20-3003100 36A12691 36A12768 36A12832 20-3003104 36A12692 36A12833 36A12769 20-3003108 36A12693 36A12770 36A12834 20-3003112 36A12771 36A12694 36A12835 20-6003769 20-3003663 20-6003797 20-6003783 20-6003770 20-3003664 20-6003798 20-6003784 20-6003771 20-3003665 20-6003799 20-6003785 20-6003772 20-3003666 20-6003800 20-6003786 20-6003773 20-3003667 20-6003810 20-6003787 20-6003802 20-6003788 20-6003774 20-3003668

Used

OAHL 65 68 71 741/2 78 82 83 85 881/2 92 951/2 981/2

MFH 135 144 153 162 171 180 184 189 198 207 216 225

BL634 CHAIN ASSEMBLY (Tab 31) PITCHES 201 35A5808 20-3006501 211 221 35A5813 20-3005815 229 20-3006502 239 20-3001342 249 261 35A5822 261 35A5822 20-3001344 277 20-3001345 285 20-3006503 297

LENGTH 150-3/4 158-1/4 165-3/4 171-3/4 179-1/4 185-3/4 195-3/4 195-3/4 207-3/4 213-3/4 222-3/4

CHAIN ANCHOR ROD (Tab 0068) 20-3000732 20-3000733 20-3000734 20-3000735 20-3000736 20-3000737 20-3000738 20-3000739 20-3000740 20-3000741 20-3000742

LENGTH 18-3/4 20-1/4 21-3/4 24-3/4 26-3/4 29-1/4 30-3/4 33-1/4 35-3/4 38-1/4 39-3/4

on MA-WC30 thru 50 Mast Serial No. 7089E4 to 7112E4 & 7620E4 & After.

Chain anchor pins located 4" below top of lower fork bar

BL634 CHAIN OUTER INTER. INNER CYLINDER CHAIN ANCHOR RAIL RAIL RAIL ASSEMBLY ASSEMBLY ROD Tab 31) PITCHES LENGTH (Tab 0068 LENGTH Tab 0325) (Tab 0323 (Tab 0322) (Tab 0306 20-3003096 35A5808 36A12767 201 36A12690 150-3/4 20-3000732 18-3/4 36A12756 36A12691 20-3003100 20-3006501 36A12768 158-1/4 20-3000733 20-1/4 211 36A12757 36A12692 20-3003104 35A5813 36A12769 165-3/4 20-3000734 21-3/4 221 36A12758 20-3003108 20-3005815 36A12770 36A12693 171-3/4 20-3000735 24-3/4 229 36A12759 20-3003112 20-3006502 36A12771 36A12694 179-1/4 20-3000736 26-3/4 239 36A12760 185-3/4 20-3000737 29-1/4 249 20-6003827 20-6003783 20-6003769 20-3003663 20-3001342 255 191-1/4 20-3000737 29-1/4 20-6006475 20-6006473 20-6006474 20-3006476 35A5821 261 195-3/4 20-3000738 30-3/4 20-6002828 20-6003784 20-6003770 29-3003664 35A5822 261 195-3/4 20-3000739 33-1/4 20-6003829 20-6003785 20-6003771 20-3003665 35A5822 207-3/4 20-3000740 35-3/4 277 20-6003830 20-6003786 20-6003772 20-3003666 20-3001344 213-3/4 20-3000741 38-1/4 285 20-6003831 20-6003787 20-6003773 20-3003667 20-3001345 222-3/4 20-3000742 39-3/4 297 20-6003832 20-6003788 20-6003774 20-3003668 20-3006503 (

(

18