GPSMART PROGRAMMING A NEW WIRELESS CONTROL FOB 1. Power up the unit in the stowed position 2. Deploy, stow and re-deploy the unit prior to pressing any fob buttons. 3. The unit will begin “beeping” indicating that it is ready to learn new wireless controls. 4. Press any button on the new fob within 20 seconds 5. When the unit stops beeping, the new fob will be learned by your system and is ready to be used.
Warning, do not attempt to stow the unit until it has stopped beeping.
ERASING ALL FOBS FROM MEMORY 1. Power the unit up in the stowed position 2. Deploy, stow and re-deploy the unit prior to pressing any fob buttons. 3. The unit will begin “beeping” indicating that it is ready to learn new wireless controls from the step above. 4. Within 20 seconds (while the system is still beeping) stow and deploy the system once more. 5. The system will sound a long beep indicating that all fobs have been erased frommemory. If this step is being performed because of concerns about a defective fob, it will be necessary to remove the batteries from all fobs in question prior to completing this process.
www.watersnake.com.au
21
