EVC-C
Installation procedure, helm
Joystick unit Installation IMPORTANT! Only one joystick per control station can be installed.
A
Decide where to put the joystick. NOTE! Remember the following when you install the joystick: -
Install the joystick on a horizontal surface.
-
Think about the operating position. Make sure that there is space to support the operator’s hand and forearm.
-
Make sure that the distance to the instruments and the other controls is sufficient, so their functionality is not affected. Install the joystick on the instrument panel as in the illustration. The thickness of the instrument panel must not be greater than 25 mm.
Mark out and make holes for the joystick. A full size template is located in the back of this installation instruction.
65