
1 minute read
Parameter settings
Adjusting parameters
Adjustable parameters
Neutral beep
Vodia text: "NeutralBIP". This parameter makes it possible to activate or deactivate the fuction that gives a "beep" sound when the control lever is set to NEUTRAL position. The function is possible to activate individually for the helms (HCUs). When the function is desirable on all helms, you have to activate it in the PCU by using the VODIA tool. This will affect all helm stations in the actual drive line, which means up to four possible HCUs (per drive line). Activated for a PCU (MID 87).
The VODIA diagnostic tool can be used to adjust EVC-parameters. This is done with the "Parameter programming" tool in the "Service and maintenance" menu.
VODIA is a Volvo Penta special tool. Complete tool part no. is 3838619
Once you have established contact with the system, you have to choose type of engine and there after the specific ECU (Engine Control Unit) in the drop down menu to show its adjustable parameters. VODIA only shows the adjustable prameters for one ECU at a time and only for an HCU if it is in Service mode
To enter Service mode, press the MULTIFUNCTION BUTTON for at least 5 sec.
NOTE! For docking station press ALARM ACKNOWLEDGE BUTTON for at least 5 sec.
NOTE! Some of the parameters may require special authorization.
More information about handling the VODIA tool is given in the VODIA Operator’s Manual.