Calibration and settings
Multisensor calibration
EVC-C
Speed factor The speed factor for the boat´s paddle wheel speed sensor can be adjusted at a resolution of 1% and is used by the EVC to apply a correction to the output from the speed sensor. Set speed factor Set speed factor while driving the boat. Compare displayed speed with speed data from GPS (or other boat) and adjust the speed factor until they correspond. Adjust the speed factor by turning the NAVIGATION WHEEL. Once adjustment value is reached, the data is stored by pushing NAVIGATION WHEEL.
Information message Start attempt with gear engaged The engine control lever must always be in neutral before starting. If not, this pop-up will be shown. Approximated trip data This pop-up will be shown if no multipoint fuel tank calibration is performed. Retrieving faults The EVC system is retrieving faults from its nodes.
Monitoring mode (inactive station) An inactive station can show system information. Push MULTIFUNCTION BUTTON on the inactive station. It is possible to navigate the menus when in monitoring mode.
100
