Trencor M1200DH Parts Manual

M1200DH Parts Manual

American Augers 135 US Route 42 West Salem, Ohio 44287 www.americanaugers.com

Released June 2023

Revision 00

7053-0102

Table of Contents Preface............................................................... 4 Seals and Filters................................................... 9 Seal Kits ..................................................... 10 Filters......................................................... 12 Decals.............................................................. 13 Decals - View 1 ............................................ 14 Decals - View 2 ............................................ 16 Decals - View 3 ............................................ 18 Decals - View 4 ............................................ 20 Support Section.................................................. 23 Trailer - View 1 ............................................. 24 Trailer - View 2 ............................................. 26 Trailer - View 3 ............................................. 28 Trailer - View 4 ............................................. 30 Trailer - View 5 ............................................. 32 Trailer - View 6 ............................................. 34 Trailer - View 7 ............................................. 36 Trailer - View 8 ............................................. 38 Trailer - View 9 ............................................. 40 Hydraulic Jacks Power Unit - 1......................... 42 Hydraulic Jacks Power Unit - 2......................... 44 Hydraulic Jacks Power Unit - 3......................... 46 Hydraulic Jacks Power Unit - 4......................... 48 Hydraulic Jacks Power Unit - 5......................... 50 Hydraulic Jacks Schematic ............................. 52 Hydraulic Tank ............................................. 54 Pneumatic Assembly - View 1.......................... 56 Pneumatic Assembly - Details A-D ................... 58 Pneumatic Assembly - Brake Hoses ................. 60 Pneumatic Assembly - View 2.......................... 62 Trap Door Assembly ...................................... 64 Power Generation ............................................... 67 Generator - View 1 ........................................ 68 Generator - View 2 ........................................ 70 Piping Section .................................................... 73 Piping Assembly ........................................... 74 Offload Piping Assembly ................................ 76 Desand Cones - View 1 .................................. 78 Desand Cones - View 2 .................................. 80 Desand Cones - View 3 .................................. 82 Desand Manifold Assembly............................. 84 Centrifugal Pump .......................................... 86

Mix/Clean Tank - View 1 ................................. 88 Mix/Clean Tank - View 2 ................................. 90 Mix/Clean Tank - View 3 ................................. 92 Mix/Clean Tank - View 4 ................................. 94 Wash Wand Assembly ................................... 96 Centrifugal Pump .......................................... 98 Inlet/Weir Box Piping ................................... 100 Inlet Piping ................................................ 102 Desilt Cones - View 1................................... 104 Desilt Cones - View 2................................... 106 Desilt Cones - View 3................................... 108 Desilt Cones - View 4....................................110 Desilt Manifold Assembly...............................112 Desilt Mud Flap ...........................................114 Centrifugal Pump Parts .......................................117 Centrifugal Pump Parts .................................118 CFP - 6X5X11 11 Inch Impeller....................... 120 CFP - 8X6X11 11 Inch Impeller....................... 122 CFP - 8X6X14 11.5 Inch Impeller.................... 124 Shaker Section................................................. 127 Shaker Assembly - View 1 ............................ 128 Shaker Assembly - Detail A........................... 130 Options Section ................................................ 133 Washdown System - View 1 .......................... 134 Washdown System - View 2 .......................... 136 Supercharge Pump - View 1 .......................... 138 Supercharge Pump - Detail A ........................ 140 Canopy Assembly ....................................... 142 Pit Pump ................................................... 144 Electrical Section .............................................. 147 Electrical Installation.................................... 148 Electrical Controls ....................................... 150 Electrical Schematic .................................... 156 Disconnect Panel Schematic ......................... 160 Appendix ........................................................ 163 Tightening Guidelines .................................. 164 SAE Bolt Torque ......................................... 165 Metric Bolt Torque ....................................... 166 Prevailing Torque Locknut Torque................... 167 Lug Nut Torque........................................... 169 Assembly Methods...................................... 170 DW Registration Card .................................. 177

Page 3

Preface Serial Number Plate Location

Rev. No.

Description of Change

00

This manual applies to M1200DH Starting SN –01.

Always include machine serial number when ordering parts.

Due to our continuing product improvement, machine specifications are subject to change without notice.

01

Page 4

ID0766033

WARRANTY CERTIFICATE FORM-176 14January2015

PARTS: 2 YEARS / 2,000 HOURS LABOR: 1 YEAR / 1,000 HOURS ENGINE AND TRANSMISSION: 2 YEARS / 2,000 HOURS RACK AND PINION: 5 YEARS / 10,000 HOURS

Warranty Terms and Conditions – The Manufacturer shall not be responsible for any damage resulting to or caused by its products by reason of installation, improper storage, unauthorized service, alteration of products, neglect or abuse, or use of the product in a manner inconsistent with its design. This warranty does not extend to any component parts not manufactured by the Manufacturer; however the Manufacturer’s warranty herein shall not limit any warranties made by the manufacturers of component parts which may extend to Buyer.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND NO REPRESENTATIONS, GUARANTEES, OR WARRANTIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO A WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE BY THE MANUFACTURER IN CONNECTION WITH THE MANUFACTURE OR SALE OF ITS PRODUCTS. No employee, distributor, or representative is authorized to change this warranty in any way or grant any other warranty on behalf of the Manufacturer.

Claims for defects in material and workmanship shall be made in writing to the Manufacturer within ten business days of the discovery of defect. The Manufacturer may either send a service representative or have the product returned to its factory at the Buyer’s expense for inspection. If the product has not been returned within 30 days of receipt of written notice, the product will no longer be eligible for the warranty claims. If, upon receipt, judged by the Manufacturer to be defective in material or workmanship, the product will be replaced or repaired at the option of the Manufacturer, free from all charges except authorized transportation.

The remedies of the Buyer set forth herein are exclusive and are in lieu of all other remedies. The liability of the Manufacturer whether in contract, tort, under any warranty, or otherwise shall not extend beyond its obligation to repair or replace, at its option, any product or part found by the Manufacturer to be defective in material or workmanship. The Manufacturer shall not be liable for cost of installation and/or removal or be responsible for direct, indirect, special or consequential damage of any nature. Under no circumstances shall the Manufacturer be liable for lost or anticipated profits.

01

Page 5

ID0677478

Welcome This manual contains illustrated parts lists to help you select quality American Augers replacement parts for your equipment. Using other replacement parts will lessen the productivity of your equipment.

• Descriptions and specifications in this book were current at publication. However, American Augers reserves the right to improve equipment, so this manual might not reflect the most current improvements.

• The drawings in this manual are the property of American Augers and may not be reproduced, published or disclosed to others without express authorization from American Augers.

• Filters and Seal Kits are listed in the front of the Parts Manual.

• Parts may be hidden on drawings for clarity.

• Instructions on recommended equipment use and maintenance are in the Operator’s Manual that was shipped with your equipment.

Keep the following in mind when ordering American Augers replacement parts: • Specify parts you need by part number and description, not by illustration reference numbers.

• Have equipment model and serial number on hand to help ensure you get the right parts for your machine whether it’s old or new.

• Order genuine American Augers replacement or repair parts from your authorized Ditch Witch dealer.

PARTS SALES INFORMATION If you need assistance in locating a dealer, visit our website at www.ditchwitch.com or write to the following address: The Charles Machine Works, Inc. Attn: Marketing Department PO Box 66 Perry, OK 73077–0066 USA

This product and its use may be covered by one or more patents at: http:// charlesmachine.works/patents/.

01

Page 6

ID0677598

Notes:

Page 7

Notes:

Page 8

Seals and Filters Table of Contents Seal Kits .........................................................10

01

Filters ..............................................................12

Page 9

ID0677598

Seal Kits Bill Of Material Number: 7022–0004

filter

PART

KIT OR PART

DESCRIPTION

8HV32002

8HV32002-01

SEAL KIT, CHECK VALVE

HYDRAULIC JACK

8MP3S250-20

8MP3S250-20A

OIL SEAL KIT

CENTRIFUGAL PUMP

8HC50042

8HC50042–01

KIT, PACKING

HYDRAULIC JACK

Page 10

LOCATION

ID0766660

Notes:

Page 11

Filters Bill Of Material Number: 7022–0004 Hydraulic Tank Assembly (Bill Of Materials: 7350–0119) COMPONENT 8FL20029

ELEMENT 8FL20029-3

DESCRIPTION ELEMENT,RETURN FILTER

Generator (Bill Of Materials: 7280–0001) COMPONENT 7280–0001 " " "

01

ELEMENT 8EG30010-01 8NG30012-52 8NG30012-53 8EG10016-02

DESCRIPTION FILTER,AIR,ASSEMBLY FILTER,FUEL,PRIMARY QSL9 T4F FILTER,FUEL,SECONDARY QSL9 T4F FILTER, LUBE, FOR CUMMINS DGFA

Page 12

ID0766761

Decals Table of Contents Decals - View 1.............................................14 Decals - View 2.............................................16

Decals - View 3.............................................18 Decals - View 4.............................................20

Page 13

Decals - View 1

BILL OF MATERIAL: 7270-0032

30 37 33 22

34

36 35

15

16 21 12

01

Page 14

23

ID0764158

Decals - View 1

BILL OF MATERIAL: 7270-0032

REF NO. 12 15

PART NUMBER 15GB7118 8ED02ARROW

QTY 2 16

16

8ED04000

21 22 23 30 33 34 35 36 37

8NP41279 8NP41310 8NP41335 270-00055 270-00058 274-442 8NP42000 8NP42001 8NP42002

DESCRIPTION DECAL,BOND FRAME TO EARTH DECAL,ARROWS,1-1/8" X 4"

REMARKS

1

TAPE,REFLECTIVE,RED/WHITE,2"W

USE 1 @ 150’

1 8 1 2 3 4 1 2 1

DECAL,OPERATION & SAFETY INS. DECAL,DRAIN,YELLOW BACKGRD,BLK STICKER,"ABS INDICATOR LAMP" M1200DH MODEL ID AMERICAN AUGERS LOGO - 34" x 11.036" LIFT LOCATION DECAL,OFFLOAD,1" X 4" DECAL,WATER INLET,1" X 6" DECAL,MUD INLET,1" X 5"

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 15

ID0764158

Decals - View 2

BILL OF MATERIAL: 7270-0032

29

7

4

13

18

6

27

12 14

01

Page 16

ID0764116

Decals - View 2

BILL OF MATERIAL: 7270-0032

REF NO. 4 6 7 12 13 14 18 27 29

PART NUMBER 270-6911 700-009 700-143 15GB7118 15GB7155 8AA00001 270-7950 8NP80242 T0171003

QTY 4 1 1 2 1 1 1 1 1

DESCRIPTION WARNING ONE CALL NOTIFICATION ISO CAUTION WEAR HEARING PROTECTION WARNING READ OPERATOR MANUAL DECAL,BOND FRAME TO EARTH DECAL,EQUIP. MUST BE GROUNDED MANUAL-PAK,PLASTIC HOLDER FOR CALIFORNIA PROP 65 WARNING - DIESEL DECAL,ULTRA LOW SULFUR DIESEL DECAL,ADBLUE/DEF ONLY

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 17

ID0764116

Decals - View 3

BILL OF MATERIAL: 7270-0032

5

19

3

1

26 25 32 39

31

1 2 38

01

4

Page 18

ID0764160

Decals - View 3

BILL OF MATERIAL: 7270-0032

REF NO. 1 2 3 4 5 19 25 26 31 32 38 39

PART NUMBER 270-2413 270-2414 270-4953 270-6911 270-8374 8NP41231 8NP80001 8NP80004 270-00056 270-00057 8NP42004 8NP42006

QTY 4 4 1 4 1 16 1 1 1 1 1 1

DESCRIPTION DECAL,DANGER,ELECTRIC SHOCK DANGER LINE LOCATIONS CAUTION SILICA DUST ISO WARNING ONE CALL NOTIFICATION ISO DANGER ARC FLASH AND SHOCK ISO DECAL,STROKE DETECTOR SOLIDS NAMEPLATE,VEH IDENTIFICATION NAMEPLATE,SERIAL NUMBER/YR. DESANDER PUMP 2" X 3" - MUD SYSTEMS DESILTER PUMP 2" X 3" - MUD SYSTEMS DECAL,MIX PUMP,2" X 3" DECAL,CLEAN AGITATE,2" X 4"

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 19

ID0764160

Decals - View 4

BILL OF MATERIAL: 7270-0032

17 8 9 10 11

01

Page 20

ID0764202

Decals - View 4

BILL OF MATERIAL: 7270-0032

REF NO. 8 9 10 11 17

PART NUMBER 270-8559 270-8560 270-8561 270-8562 8NP41104

QTY 1 1 1 1 1

DESCRIPTION WALKWAY UP/DOWN - PASS WALKWAY UP/DOWN - DRIVE JACK UP/DOWN - PASS JACK UP/DOWN - DRIVE SIGN:HYDRAULIC OIL SILVER/BLAC

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 21

ID0764202

Notes:

Page 22

Support Section Table of Contents Trailer - View 1..............................................24 Trailer - View 2..............................................26 Trailer - View 3..............................................28 Trailer - View 4..............................................30 Trailer - View 5..............................................32 Trailer - View 6..............................................34 Trailer - View 7..............................................36 Trailer - View 8..............................................38 Trailer - View 9..............................................40 Hydraulic Jacks Power Unit - 1.................42 Hydraulic Jacks Power Unit - 2.................44

Hydraulic Jacks Power Unit - 3.................46 Hydraulic Jacks Power Unit - 4.................48 Hydraulic Jacks Power Unit - 5.................50 Hydraulic Jacks Schematic........................52 Hydraulic Tank ..............................................54 Pneumatic Assembly - View 1 ..................56 Pneumatic Assembly - Details A-D..........58 Pneumatic Assembly - Brake Hoses.......60 Pneumatic Assembly - View 2 ..................62 Trap Door Assembly....................................64

Page 23

Trailer - View 1

BILL OF MATERIAL: 7350-0057

74 60 60 84

94 22 88 18 50 17 20 21

97 29

33 105 25

101 93

60 74

2

01

Page 24

ID0764325

Trailer - View 1

BILL OF MATERIAL: 7350-0057

REF NO. 2 17 18 20 21 22 25 29 33 50 60 74 84 88 93 94 97 101 105

PART NUMBER 7300-0674 7300-0887 7300-0907 7300-0934 7300-0939 7300-0944 7350-0137 0TRLR17040 40MP1662 71MC1670 8FW21110 8HH51515 8LN51110 8PC13216 8PP10064 8PP92001 99MC1579 DD15LHAEC18 7280-0004

QTY 1 1 1 1 1 1 1 12 6 1 76 38 35 7 3 5 1 6 6

DESCRIPTION TRAILER ASM,WELDMENT,M1200DH WALKWAY,FOLDING,PS/F,M1200DH WALKWAY,FOLDING,M1200DH HANDRAIL,PASS/FRNT,M1200DH HANDRAIL,END,PASS SD,FRONT HANDRAIL,END,PASS SD,REAR KIT,DRAIN VALVE TIRE/RIM, TUBELESS, 38"OD MAX, BAR-CLAMP,F/ 18"CLEAN-OUT CVR HANDRAIL,PASS/REAR,MCD-1000 WASHER, FLAT,.625N,ZN PLT SCREW,CAP,HX.HD..625-11X 3.5" ZN PLTD NUT,HEX LOCK .625-11 UNC2B COUPLING,PIPE,BLACK, 2IN X 1IN PLUG,PIPE, 4 " PIPE,SQ.HEAD 150PSI CAP,PLASTIC,1-1/2"SQ TU,.134 LADDER, WELDMENT, FOLD-UP, CLN-OUT CVR PLATE-18"DIA.W/SEAL&BOLT GASKET,EPDM,FOR 18 IN. CLEANOUT COVER

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 25

ID0764325

Trailer - View 2

BILL OF MATERIAL: 7350-0057

100 78 14 60 48 15 49 84

46

60 16 19

52

64

53

51

01

Page 26

ID0764326

Trailer - View 2

BILL OF MATERIAL: 7350-0057

REF NO. 14 15 16 19 46 48 49 51 52 53 60 64 78 84 100

PART NUMBER 7300-0860 7300-0869 7300-0878 7300-0929 70MC1589 70MC1668 70MC1675 8CP10504 8CP22431 8CP22434 8FW21110 8HC20019 8HH81891 8LN51110 99MC1671

QTY 1 1 1 1 2 1 1 8 4 4 76 4 3 35 1

DESCRIPTION WALKWAY,FOLDING,D-SD,M1200DH WALKWAY,FOLDING,D-SD,M1200DH WALKWAY,FOLDING,D-SD,M1200DH HANDRAIL, DRV SIDE, M1200DH ASSEMBLY,TRAP DOOR,MCD-1000 HANDRAIL,DRIVER SIDE,MCD-1000 HANDRAIL,DRIVER SIDE,MCD-1000 PIN,COTTER .15625DIA X 1.5 LG PIN, CLEVIS 3/4 X 4 PIN, CLEVIS 3/4 X 3-1/2 LG WASHER, FLAT,.625N,ZN PLT CYL,HYD,2"BX10"STROKE 1-1/8ROD SCREW,CAP,HX HD.5/8-11X 7" NUT,HEX LOCK .625-11 UNC2B HANDRAIL, END, DRV SIDE, FRONT

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 27

ID0764326

Trailer - View 3

BILL OF MATERIAL: 7350-0057

12

104

102 58

103

69

73

79

32

7

69 98

23

82

30 85

58

61 31 27 58 75 70 61 82 58

01

Page 28

ID0764328

Trailer - View 3

BILL OF MATERIAL: 7350-0057

REF NO. 7 12 23

PART NUMBER 7300-0839 7300-0856 7300-0953

QTY 1 3 4

DESCRIPTION RAILING,FRONT STEPS, M1200DH PLATE,SUPPORT,WALKWAY CHUTE,WELDMENT,SHAKER

REMARKS

27 30 31 32 58 61 69 70 73 75 79 82 85 98 102 103 104

305239 22DD5082 30GB2170 30MC1562 8FW21106 8FW21112 8HH51303 8HH51305 8HH51407 8HH51559 8HN51108 8LN51106 8LN51112 99MC1593 7300-0783 8LW91106 7300-0884

128 8 8 1 79 20 46 36 19 8 1 29 10 1 4 16 4

3/16 LIGHT DUTY CHAIN WIRE EYE BOLT 3/8-16 X 2LONG LINK,SNAP 5/16" X 2-3/8" POST,LIGHT,LED,MCM-300 WASHER, FLAT, 3/8N ZN PLTD WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD. .375-16X .75" SCREW,CAP,HX.HD. .375-16X 1" SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX.HD,.75-10X 2" ZN PLTD NUT,HEX, .5-13 UNC ZN PLTD NUT,HEX LOCK .375-16 UNC2B NUT,HEX LOCK .75-10 UNC2B HANDRAIL, FOLDING WELDMENT, MOUNT,CYLINDER,WELDMENT,WALKWAY WASHER,LOCK,NORDLOCK 3/8" SPACER,WALKWAY CYLINDER,ROD END

USE 1@ 128"

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 29

ID0764328

Trailer - View 4

BILL OF MATERIAL: 7350-0057

43

6

68

57

42

44

41

59 72

83

59

8 77

62

99

62

86

83 59 59 73

01

Page 30

ID0764330

Trailer - View 4

BILL OF MATERIAL: 7350-0057

REF NO. 6 8 41 42 43 44 57 59 62 68 72 73 77 83 86 99

PART NUMBER 7300-0823 7300-0852 51MP1588 51MP1589 51MP1593 51MP1595 8FW21104 8FW21108 8FW21116 8HH51206 8HH51406 8HH51407 8HH51663 8LN51108 8LN51116 99MC1606

QTY 1 1 1 1 1 1 5 56 32 1 10 19 16 28 16 4

DESCRIPTION RAILING,FRONT,W/ GATE COVER,UNDER STAIRS,FRONT END GATE HANDLE WELDMENT GATE HANDLE LATCH WELDMENT SUPPORT,CANOPY,WELDMENT GATE POST,CANOPY,WELDMENT WASHER,FLAT,.25N ZN,PLTD WASHER,FLAT,.5N,ZN.PLTD WASHER,FLAT,1"N,ZN.PLTD SCREW,CAP,HX.HD,1/4-20X 1-1/4" SCREW,CAP,HX.HD..5-13 X 1.25 ZN PLTD SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX.HD.1-8X 3" ZN PLTD NUT,HEX LOCK .5-13 UNC2B NUT,HEX LOCK 1"-8 UNC2B WELDMENT, LIFT RING, BOLT ON,

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 31

ID0764330

Trailer - View 5

BILL OF MATERIAL: 7350-0057

1

89

26

40 90 4

70

58

4

95

01

Page 32

ID0764331

Trailer - View 5

BILL OF MATERIAL: 7350-0057

REF NO. 1 4 26

PART NUMBER 30-1030-5094 7300-0761 305238

QTY 1 1 38

40 58 70 89 90 95

50MP3304-1 8FW21106 8HH51305 8PC40012 8PG00008 99MC1565

1 79 36 1 1 1

DESCRIPTION BREATHER, .75"NPT COVER, FUEL TANK WELDMENT

REMARKS

#40 SASH CHAIN CAP,FILLER, FUEL 4" NPT FEMALE WASHER, FLAT, 3/8N ZN PLTD SCREW,CAP,HX.HD. .375-16X 1" COUPLING,PIPE 3/4 5000-12 GAUGE,FUEL,TOP MOUNT 18" STEM GASKET,FUEL TANK COVER, BUNA-N

USE 1 @ 38"

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 33

ID0764331

Trailer - View 6

BILL OF MATERIAL: 7350-0057

3 94 5

84 60 60 74 76 61 61 85

01

Page 34

ID0764332

Trailer - View 6

BILL OF MATERIAL: 7350-0057

REF NO. 3 5 60 61 74 76 84 85 94

PART NUMBER 7300-0733 7300-0803 8FW21110 8FW21112 8HH51515 8HH51563 8LN51110 8LN51112 8PP92001

QTY 1 1 76 20 38 2 35 10 5

DESCRIPTION WALKWAY,FOLDING,D-SD,M1200DH PLATFORM,REAR DECK,M1200DH WASHER, FLAT,.625N,ZN PLT WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD..625-11X 3.5" ZN PLTD SCREW,CAP,HX.HD.3/4-10X 3" NUT,HEX LOCK .625-11 UNC2B NUT,HEX LOCK .75-10 UNC2B CAP,PLASTIC,1-1/2"SQ TU,.134 -

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 35

ID0764332

Trailer - View 7

BILL OF MATERIAL: 7350-0057

56

9 56

10

37 24

38 70

36 65 96

39 38 70

01

Page 36

ID0764333

Trailer - View 7

BILL OF MATERIAL: 7350-0057

REF NO. 9 10 24 36 37 38 39 56 65 70 96

PART NUMBER 7300-0853 7300-0854 7350-0118 50MP1571 50MP1572 50MP1573 50MP1576 8FS81203 8HC50042 8HH51305 99MC1575

QTY 1 1 1 2 2 8 2 18 2 36 2

DESCRIPTION REMARKS COVER,DECK,FRONT END COVER,DECK,FRONT END POWER UNIT ASSY,GAS,HYD JACKS & WALKWAY GUIDE,JACK,WELDMENT PIN,CYLINDER 1.5" OD X 12"L WASHER, PIN RETAINER PIN,CYLINER 1.5" OD X 9-1/4"L SCREW,FLT HD SOC.1/4-20X 3/4" CYL,HYD.5"B X 42" NPT PORTS SCREW,CAP,HX.HD. .375-16X 1" FOOT, JACK, WELDMENT,MCR-10000

NOT SHOWN: 8HC50042-01

KIT,PACKING F/HYD.CYL.8HC50042

FOR ITEM 65

FOOTNOTES: NOTE:

01

Page 37

ID0764333

Trailer - View 8

BILL OF MATERIAL: 7350-0057

57

67

28 54 34 57 70 81

92

58 80 35 91 82

45

82

58

55

01

Page 38

ID0764334

Trailer - View 8

BILL OF MATERIAL: 7350-0057

REF NO. 28 34 35 45 54 55 57 58 67 70 80 81 82 91 92

PART NUMBER 0TRLR16059 40MP8200 50MP1545 6EC50020 8EP86200 8EP86301 8FW21104 8FW21106 8HH51205 8HH51305 8HV21024 8LN51104 8LN51106 8PN22404 8PP10024

QTY 1 2 2 1 3 5 5 79 2 36 1 2 29 1 1

DESCRIPTION PNEUMATIC ASSEMBLY,MCD-1000 FLAP,MUD W/ RED/BLUE AA LOGO WASHER PLATE,MUD FLAP 24" LIGHT KIT,TRAILER,MUD PUMPS & CLAMP,WIRE;3/8"TUBE CLAMP CLAMP, P RATCHET; .52" TO .77" WASHER,FLAT,.25N ZN,PLTD WASHER, FLAT, 3/8N ZN PLTD SCREW,CAP,HX.HD, .25-20X 1" SCREW,CAP,HX.HD. .375-16X 1" VALVE,BALL 1 1/2" FULL PORT NUT, HEX, LOCK, 1/4-20 NUT,HEX LOCK .375-16 UNC2B NIPPLE,STEEL,1 1/2NPT X 4"LG PLUG,PIPE,SQ.HEAD, 1 1/2"

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 39

ID0764334

Trailer - View 9

BILL OF MATERIAL: 7350-0057

66

01

47

Page 40

63

87

ID0764335

Trailer - View 9

BILL OF MATERIAL: 7350-0057

REF NO. 47 63 66 87

PART NUMBER 70MC1591 8FW31008 8HH01409 8LN59108

QTY 4 12 12 12

DESCRIPTION RETAINER,DOOR,MCD-1000 WASHER,FLAT, 1/2 SCREW,CAP,HX.HD.1/2-13 X 2" NUT,HEX LOCK 1/2-13 UNC2B

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 41

ID0764335

Hydraulic Jacks Power Unit - 1 BILL OF MATERIAL: 7350-0118

52 37 44 43 39 12

27

29

28

45 46 11 50

1

54 32

30 33

55

55

53

30

30

01

Page 42

ID0764368

Hydraulic Jacks Power Unit - 1 BILL OF MATERIAL: 7350-0118

REF NO. 1 11 12 27 28 29 30 32 33 37 39 43 44 45 46 50 52 53 54 55

PART NUMBER 7350-0119 7150-0322 7150-0323 8CS31008 8CS31026 8CS33004 8FW21106 8HH51303 8HH51307 8HV80314 8NG10045 8OA30810 8OA30812 8OA31210 8OA31212 8OL30810 8OR80606 8PD51007 8PH20071 8SH81306

QTY 1 1 1 1 1 1 13 7 4 1 1 1 1 1 1 1 4 1 1 6

DESCRIPTION TANK ASSEMBLY,HYDRAULIC HOSE ASM,HYD,PUMP OUTLET HOSE ASM,HYD,PUMP INLET HUB,COUPLING,1"B X 1/4" KW HUB,COUPLING,5/8"B X 5/32" KW INSERT,COUPLING, LOVEJOY WASHER, FLAT, 3/8N ZN PLTD SCREW,CAP,HX.HD. .375-16X .75" SCREW,CAP,HX HD, .375-16X 1.5" VALVE,DIR MAN 4 SPOOL OC ENGINE,HONDA,12 HP,GAS 8-10-F5OLO,STR THRD CONNECTOR 8-12-F5OLO,STR THRD CONNECTOR 12-10-F5OLO,STR THRD CONNECTOR 12-12-F5OLO,STR THRD CONNECTOR 8-10-C5OLO,STR THRD ELBOW 90 6-6-R6LO,SWIVEL NUT RUN TEE MOUNT,PUMP,SAE A,CAST ALUMINUM PUMP,HYD,GEAR,0.3CIR,SAE A,RH SCREW,CAP,SOC.HD .375-16X 1.25

1

SCHEMATIC,HYDRAULIC,JACK/WALK

REMARKS

NOT SHOWN: 56

7050–0001

FOOTNOTES: NOTE:

01

Page 43

ID0764368

Hydraulic Jacks Power Unit - 2 BILL OF MATERIAL: 7350-0118

25

41

19 14

26

47

25 20

58 4

5

57 10

43

01

Page 44

ID0764369

Hydraulic Jacks Power Unit - 2 BILL OF MATERIAL: 7350-0118

REF NO. 4 5 10 14 19 20 25 26 41 43 47 57 58

PART NUMBER 7150-0315 7150-0316 7150-0321 7150-0325 7150-0330 7150-0331 8CL25006 8CL25021 8OA30608 8OA30810 8OA61008 66DD3222 8OA80806

QTY 1 1 1 1 1 1 12 2 18 1 4 2 2

DESCRIPTION HOSE ASM,HYD,JACK CYL RET HOSE ASM,HYD,JACK CYL EXT HOSE ASM,HYD,TANK HOSE ASM,HYD,WALKWAY CYL RET HOSE ASM,HYD,WALKWAY CYL RET HOSE ASM,HYD,WALKWAY CYL EXT CLAMP,ASSY,CUSHION,0.750 ID CLAMP,ASSY,CUSHION,2.000 ID 6-8-F5OLO,STR THRD CONNECTOR 8-10-F5OLO,STR THRD CONNECTOR 8-8-F5OHAO,STR THREAD UNION ASSY,ORIFICE FITTING, .047 DIA 8-6-TRLO,TUBE END REDUCER

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 45

ID0764369

Hydraulic Jacks Power Unit - 3 BILL OF MATERIAL: 7350-0118

40

9

8

42

34

35

49

38

49

31

48

01

Page 46

ID0764370

Hydraulic Jacks Power Unit - 3 BILL OF MATERIAL: 7350-0118

REF NO. 8 9 31 34 35 38 40 42 48 49

PART NUMBER 7150-0319 7150-0320 8HH51259 8HV30016 8HV32002 8LN51105 8OA10812 8OA30808 8OL10812 8OL30808

QTY 1 1 4 2 2 4 2 8 2 5

DESCRIPTION HOSE ASM,HYD,JACK CYL RET HOSE ASM,HYD,JACK CYL EXT SCREW,CAP,HX.HD.5/16-18X 2" VALVE,CHECK,INLINE W/ORIFICE VALVE,CHECK,DUAL P.O.SAE-8 PRT NUT,HEX LOCK .3125-18 UNC2B 8-12-FLO,ORFS MALE CONNECTOR 8-8-F5OLO,STR THRD CONNECTOR 8-12-CLO,MALE PIPE ELBOW 90 8-8-C5OLO,STR THRD ELBOW 90

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 47

ID0764370

Hydraulic Jacks Power Unit - 4 BILL OF MATERIAL: 7350-0118

41 13 36

17

18 3 7

6

2

35

01

Page 48

ID0764372

Hydraulic Jacks Power Unit - 4 BILL OF MATERIAL: 7350-0118

REF NO. 2 3 6 7 13 17 18 35 36 41

PART NUMBER 7150-0313 7150-0314 7150-0317 7150-0318 7150-0324 7150-0328 7150-0329 8HV32002 8HV66024 8OA30608

QTY 1 1 1 1 1 1 1 2 4 18

DESCRIPTION HOSE ASM,HYD,JACK CYL RET HOSE ASM,HYD,JACK CYL EXT HOSE ASM,HYD,JACK CYL RET HOSE ASM,HYD,JACK CYL EXT HOSE ASM,HYD,WALKWAY CYL RET HOSE ASM,HYD,WALKWAY CYL RET HOSE ASM,HYD,WALKWAY CYL EXT VALVE,CHECK,DUAL P.O.SAE-8 PRT VALVE,COUNTERBALANCE,3:1 6-8-F5OLO,STR THRD CONNECTOR

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 49

ID0764372

Hydraulic Jacks Power Unit - 5 BILL OF MATERIAL: 7350-0118

16

24

23

22

21

15

01

Page 50

ID0764373

Hydraulic Jacks Power Unit - 5 BILL OF MATERIAL: 7350-0118

REF NO. 15 16 21 22 23 24

PART NUMBER 7150-0326 7150-0327 7150-0332 7150-0333 7150-0334 7150-0335

QTY 1 1 1 1 1 1

DESCRIPTION HOSE ASM,HYD,WALKWAY CYL RET HOSE ASM,HYD,WALKWAY CYL RET HOSE ASM,HYD,WALKWAY CYL RET HOSE ASM,HYD,WALKWAY CYL EXT HOSE ASM,HYD,WALKWAY CYL EXT HOSE ASM,HYD,WALKWAY CYL RET

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 51

ID0764373

Hydraulic Jacks Schematic BILL OF MATERIAL: 7050-0001

01

Page 52

ID0765517

Hydraulic Jacks Schematic BILL OF MATERIAL: 7050-0001

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13

PART NUMBER 8FL10026 8PH20071 8HV80314 8HV32002 8HC50042 8FL20029 8FL20029-3 8FL20029-1 8HV30016 8FL20029-2 8HC20019 8HV66024 66DD3222

QTY 1 1 1 2 2 1 1 1 2 1 4 4 2

DESCRIPTION STRAINER,SUCTION,100 MESH,-20X -12SAE PUMP,HYD,GEAR,0.3CIR,SAE A,RH VALVE,DIR MAN 4 SPOOL OC VALVE,CHECK,DUAL P.O.SAE-8 PRT CYL,HYD.5"B X 42" NPT PORTS FILTER,HYD,RETURN,10MICRON ABS ELEMENT,RETURN FILTER INDICATOR,VISUAL FOR 8FL20029 VALVE,CHECK,INLINE W/ORIFICE BREATHER,TANK,FOR 8FL20029 CYL,HYD,2"BX10"STROKE 1-1/8ROD VALVE,COUNTERBALANCE,3:1 ASSY,ORIFICE FITTING, .047 DIA

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 53

ID0765517

Hydraulic Tank BILL OF MATERIAL: 7350-0119

11

6

5

9

7

10

8

1

3

13

2 12

4

01

Page 54

ID0764542

Hydraulic Tank BILL OF MATERIAL: 7350-0119

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13

PART NUMBER 7300-0769 7300-0772 50MP3308 8FL10026 8FL20029 8FL20029-1 8FL20029-2 8FW21105 8FW21106 8HH51251 8HH81305 8PG00005 8PP10012

QTY 1 1 1 1 1 1 1 14 2 14 2 1 1

DESCRIPTION COVER,WELDMENT,TANK TANK,WELDMENT,HYDRAULIC GASKET,BUNA-N HYD TANK JACKS STRAINER,SUCTION,100 MESH,-20X -12SAE FILTER,HYD,RETURN,10MICRON ABS INDICATOR,VISUAL FOR 8FL20029 BREATHER TANK F/ 8FL20029 WASHER,FLAT.3125N ZN.PLTD WASHER, FLAT, 3/8N ZN PLTD SCREW,CAP,HX.HD,5/16-18X 1/2" SCREW,CAP,HX.HD. .375-16X 1" GAUGE,FLUID LEVEL,5" W/THERMOM PLUG,PIPE,SQ.HEAD, 3/4"

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 55

ID0764542

Pneumatic Assembly - View 1 BILL OF MATERIAL: 0TRLR16059

102

DETAIL A

DETAIL B

DETAIL C

101

12

111 118

4 DETAIL D 110 115

114 113 105

3

112 119

20 15 18

02

Page 56

ID0741111

Pneumatic Assembly - View 1 BILL OF MATERIAL: 0TRLR16059

REF NO. 3 4 12 15 18 20 101 102 105 110 111 112 113 114 115 118 119

PART NUMBER 0TRLR17027 0TRLR17031 0TRLR17063 8FW21106 8HH51307 8LN51106 473059 473060 8AA10806 8AL10806 8AL41208 8AR10804 8AS10006 8AS20612 8AS31206 8PN40008 8PP80006

QTY 2 1 2 26 8 13 16 3 2 3 1 1 24 24 24 1 5

DESCRIPTION REMARKS VALVE,DRAIN,AIR TANK,1/4"NPTM VALVE, SPRING BRAKE CONTROL TANK, AIR, 12"DIA, 3150 CUI WASHER,FLAT,.375N ZN PLTD SCREW,CAP,HX HD, .375-16X 1.5" NUT,HEX LOCK .375-16 UNC2B CLAMP ASSEMBLY, 1/2 INCH CLAMP ASSEMBLY, 3/4 INCH PMT MALE CNNTR, -08 PREST. X -06 NPT MALE 90 DEG ELBOW, M., -08 PREST. X -06 NPT M. 90 DEG. ELBOW, M., -12 COMPRSN X -08 NPT M. PMT MALE RUN TEE, -08 PREST. X -04 NPT MALE SPRING AND NUT, AIRBRAKE HOSE, 3 1/2" F. SWVL CONNECT -06 NPT F. X 3/4-20 STRT FEM ADPTR, AIR BRAKE, 3/4-20 STRT M. X -06 NPT M. NIPPLE, PIPE, 1/2 INCH, 3000 PSI PLUG, PIPE, 3/8 INCH NPT MALE, SQUARE HEAD

NOT SHOWN: 11

0TRLR17062

-

KIT, AIR, FITTINGS AND LINES

FOOTNOTES: NOTE:

02

Page 57

ID0741111

Pneumatic Assembly - Details A-D BILL OF MATERIAL: 0TRLR16059

DETAIL A

113

114 115 103

121 8 106 20 DETAIL B

109 15 110 17 10

9 116 1

DETAIL C

104

119

DETAIL D 120

13 16 14

117 108

109

5

2

19

02

Page 58

ID0741060

Pneumatic Assembly - Details A-D BILL OF MATERIAL: 0TRLR16059

REF NO. 1 2 5 8 9 10 13 14 15 16 17 19 20 103 104 106 108 109 110 113 114 115 116 117 119 120 121

PART NUMBER 0TRLR17020 0TRLR17026 0TRLR17032 0TRLR17050 0TRLR17051 0TRLR17051 0TRLR17064 8FW21105 8FW21106 8HH51256 8HH51305 8LN51105 8LN51106 0PE40002 8AA10804 8AA41212 8AE70808 8AL10804 8AL10806 8AS10006 8AS20612 8AS31206 8AT70808 8PN00606 8PP80006 8PP80008 8PP80012

QTY 1 1 1 1 1 1 1 2 26 2 5 2 13 6 2 1 2 9 3 24 24 24 7 1 5 1 1

DESCRIPTION REMARKS KIT, HEIGHT, CONTROL F/TRLR VALVE, PRESSURE PROTECT, .80PSI VALVE, AIR, MANUAL DUMP ABS, ECU/SINGLE MODULATOR VALVE ABS,POWER CABLE,3FT,4CONDUCTOR ABS,POWER CABLE,3FT,4CONDUCTOR VALVE, MULTI-FUNCTION, RT4 WASHER,FLAT.3125N ZN.PLTD WASHER,FLAT,.375N ZN PLTD SCREW,CAP,HX.HD.5/16-18X 1-1/4 SCREW,CAP,HX.HD. .375-16X 1" NUT,HEX LOCK .3125-18 UNC2B NUT,HEX LOCK .375-16 UNC2B ELBOW, PIPE, STREET, 3/8 INCH PMT MALE CONNTR, -08 PREST. X -04 NPT M. NTA M. CONNTR, -12 COMPRSN X -12 NPT M. PTC 90° UNION ELBOW -08PREST. x-08PREST. ELBOW, MALE, 90 DEGREE 90 DEG ELBOW, M., -08 PREST. X -06 NPT M. SPRING AND NUT, AIRBRAKE HOSE, 3 1/2" F. SWVL CONNECT -06 NPT F. X 3/4-20 STRT FEM ADPTR, AIR BRAKE, 3/4-20 STRT M. X -06 NPT M. PMT UNION TEE, -08 PREST. X -08 PREST. BRASS NPT NIPPLE, -06 NPT M. X -06 NPT M. PLUG, PIPE, 3/8 INCH NPT MALE, SQUARE HEAD PLUG, PIPE, 1/2 INCH NPT MALE, SQUARE HEAD PLUG, PIPE, 3/4 INCH NPT MALE, SQUARE HEAD

NOT SHOWN:

FOOTNOTES: NOTE:

02

Page 59

ID0741060

Pneumatic Assembly - Brake Hoses BILL OF MATERIAL: 0TRLR16059

CENTER AXLE BRAKE CYLINDERS REAR AXLE BRAKE CYLINDERS

151

145 149

150

146

147

152

148

FRONT AXLE BRAKE CYLINDERS 155

153

154

156

01

Page 60

ID0741114

Pneumatic Assembly - Brake Hoses BILL OF MATERIAL: 0TRLR16059

REF NO. 145

PART NUMBER 7HB23606

QTY 45 in

DESCRIPTION HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

REMARKS 1 @ 45"

146

7HB23606

45 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 45"

147

7HB23606

100 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 100"

148

7HB23606

100 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 100"

149

7HB23606

20 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 20"

150

7HB23606

20 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 20"

151

7HB23606

30 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 30"

152

7HB23606

30 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 30"

153

7HB23606

19 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 19"

154

7HB23606

19 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 19"

155

7HB23606

30 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 30"

156

7HB23606

30 in

HOSE, AIR BRAKE, 3/8 INCHES, 225 PSI

1 @ 30"

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 61

ID0741114

Pneumatic Assembly - View 2 BILL OF MATERIAL: 0TRLR16059

101

6

7 17

15 107 21 20

01

Page 62

ID0741126

Pneumatic Assembly - View 2 BILL OF MATERIAL: 0TRLR16059

REF NO. 6 7 15 17 20 21 101 107

PART NUMBER 0TRLR17035 0TRLR17036 8FW21106 8HH51305 8LN51106 70MC1677 473059 8AA90808

QTY 1 1 26 5 13 1 16 2

DESCRIPTION GLAD HAND, EMERGENCY, .5" NPTF GLAD HAND, SERVICE, .5" NPTF WASHER,FLAT,.375N ZN PLTD SCREW,CAP,HX.HD. .375-16X 1" NUT,HEX LOCK .375-16 UNC2B BRACKET, GLAD HAND CLAMP ASSEMBLY, 1/2 INCH BULKHEAD, -08 PRESTOMATIC X -08 NPT MALE

REMARKS

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 63

ID0741126

Trap Door Assembly BILL OF MATERIAL: 70MC1589

8 3

2

7 5 4

6

1

01

Page 64

ID0739466

Trap Door Assembly BILL OF MATERIAL: 70MC1589

REF NO. 1 2 3 4 5 6 7 8

PART NUMBER 70MC1587 70MC1588 8FW21112 8FW31008 8HH01200 8HH01409 8LN59108 8LN51112

QTY 1 1 1 2 1 1 1 1

DESCRIPTION WELDMENT,TRAP DOOR,MCD-1000 BAR,LIFTING,TRAP DOOR,MCD-1000 WASHER,FLAT,.75N,ZN.PLTD WASHER,FLAT, 1/2 3/4-10 X 3" LG FULL THRD CAP SCREW,CAP,HX.HD.1/2-13 X 2" NUT,HEX LOCK 1/2-13 UNC2B NUT,HEX LOCK .75-10 UNC2B

REMARKS

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 65

ID0739466

Notes:

Page 66

Power Generation Table of Contents Generator - View 1.......................................68

Generator - View 2.......................................70

Page 67

Generator - View 1 BILL OF MATERIAL: 7350-0139

2

15

18 4 14

13

17

01

16

19

16

Page 68

ID0764529

Generator - View 1 BILL OF MATERIAL: 7350-0139

REF NO. 2 4 13 14 15 16 17 18 19

PART NUMBER 7280-0001 8HH51407 7300-0855 7300-0857 30MC1562 8FW21106 8HH51307 8HN51108 8LN51106

QTY 1 7 2 1 1 8 4 1 4

DESCRIPTION GENSET,T4F,265KW,60HZ,W/SOUND ENCL. SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD PLATE,CLAMP,LIGHT LIGHT POLE,REAR DECK POST,LIGHT,LED,MCM-300 WASHER, FLAT, 3/8N ZN PLTD SCREW,CAP,HX HD, .375-16X 1.5" NUT,HEX, .5-13 UNC ZN PLTD NUT,HEX LOCK .375-16 UNC2B

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 69

ID0764529

Generator - View 2 BILL OF MATERIAL: 7350-0139

12 8 7

10

1 9

11

4

3

3

5

SOME PARTS REMOVED FOR CLARITY

01

Page 70

ID0764530

Generator - View 2 BILL OF MATERIAL: 7350-0139

REF NO. 1 3 4 5 7 8 9 10 11 12

PART NUMBER 7150-0426 8FW22108 8HH51407 8LN51108 8OA81008 8OL71010 8TA61012 99MC1566 8OA30806 8OA30808

QTY 2 12 7 6 2 2 2 2 1 1

DESCRIPTION HOSE ASSEMBLY,FUEL LINE,M1200DH WASHER,FLAT,.5W,ZN PLTD SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD NUT,HEX LOCK .5-13 UNC2B 10-8-TRLO-BL,TUBE END REDUCER 10-10-ELO,UNION ELBOW,90,MALE 10-12F5BU-S,.641DRILL STR THRD TUBE, DIP, FUEL, STAINLESS 8-6-F5OLO,STR THRD CONNECTOR 8-8-F5OLO,STR THRD CONNECTOR

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 71

ID0764530

Notes:

Page 72

Piping Section Table of Contents Piping Assembly...........................................74 Offload Piping Assembly ............................76 Desand Cones - View 1 ..............................78 Desand Cones - View 2 ..............................80 Desand Cones - View 3 ..............................82 Desand Manifold Assembly.......................84 Centrifugal Pump .........................................86 Mix/Clean Tank - View 1 .............................88 Mix/Clean Tank - View 2 .............................90 Mix/Clean Tank - View 3 .............................92 Mix/Clean Tank - View 4 .............................94

Wash Wand Assembly................................96 Centrifugal Pump .........................................98 Inlet/Weir Box Piping................................ 100 Inlet Piping .................................................. 102 Desilt Cones - View 1............................... 104 Desilt Cones - View 2............................... 106 Desilt Cones - View 3............................... 108 Desilt Cones - View 4................................110 Desilt Manifold Assembly.........................112 Desilt Mud Flap...........................................114

Page 73

Piping Assembly BILL OF MATERIAL: 7350-0056

6 2

4

3 1

5

01

Page 74

ID0764547

Piping Assembly BILL OF MATERIAL: 7350-0056

REF NO. 1 2 3 4 5 6

PART NUMBER 7350-0058 7350-0059 7350-0060 7350-0061 7350-0062 7350-0063

QTY 1 1 1 1 1 1

DESCRIPTION PIPING,OFFLOAD,ASM,M-1200DH PIPING,CONES,DESAND,ASM,M-1200DH PIPING,MIX/CLN TNK,ASM,M-1200DH PIPING,IN/WEIR BOXES,ASM,M-1200DH PIPING,INLET/SPRAY,ASM,M-1200DH PIPING,CONES,DESILT,ASM,M-1200DH

REMARKS

NOT SHOWN: 7

591014

1

KIT,TEST,SLURRY,HDD,FLUID

FOOTNOTES: NOTE:

01

Page 75

ID0764547

Offload Piping Assembly BILL OF MATERIAL: 7350-0058

3

2

5

4

6

1

01

Page 76

ID0764551

Offload Piping Assembly BILL OF MATERIAL: 7350-0058

REF NO. 1 2 3 4 5 6

PART NUMBER 7300-0956 7150-0299 14MP5116 8FW21112 8HH51568 8PF00096

QTY 1 1 1 8 8 1

DESCRIPTION PIPING,OFFLOAD,M-1200DH COUPLING,BAUER,6" FEMALE X M NPT VALVE, BUTTERFLY, 6" WAFER W/LEVER WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD..75-10X 4.5" ZN PLTD FLANGE,PIPE,6" NPT THDD. W/ 8

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 77

ID0764551

Desand Cones - View 1 BILL OF MATERIAL: 7350-0059

19 5 14

15 25 41 31 27 23 8 23

38

1

22 2

11 43

3

21

47 37

01

Page 78

ID0764532

Desand Cones - View 1 BILL OF MATERIAL: 7350-0059

REF NO. 1 2 3 5 8 11 14 15 19 21 22 23 25 27 31 37 38 41 43 47

PART NUMBER 7300-0959 7300-0965 0HP00012 40MP4460 51MP8413 71MC5216 71MC8416 71MC8417 71MC8422 8CL11021 8CL25012 8FW21104 8FW21112 8HH51206 8HH51562 8HV21008 8LN51104 8LW51112 8PE80808 8PN20800

QTY 1 1 1 3 2 1 1 1 1 1 1 16 104 8 16 1 8 32 1 1

DESCRIPTION PIPING,CONES,DESAND,M-1200DH HOSE,DRAIN NIPPLE,COMBINATION,BRASS GASKET-FLANGE .5" TK.BUNA-N MOUNTING STRIP,SEAL,SHORT PUMP,CENTRIFUGAL,ASSEMBLY PIPING,RETURN,WELDMENT PIPING,RETURN,WLMT,MCD-1000 MANIFOLD,ASM,DESANDER,10" CONE CLAMP, HOSE, WORM DRIVE, NO.12 CLAMP,ASSY,CUSHION,1.125 ID WASHER,FLAT,.25N ZN,PLTD WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD,1/4-20X 1-1/4" SCREW,CAP,HX HD,.75-10X 2.75" ZN PLTD VALVE,BALL .5 FULL PORT NUT, HEX, LOCK, 1/4-20 WASHER,LOCK,SPLIT .75" ELBOW,PIPE,STREET 90 DEG 1/2" NIPPLE,PIPE,STEEL, .5 NPT

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 79

ID0764532

Desand Cones - View 2 BILL OF MATERIAL: 7350-0059

9 45 42 36 13 33

4 10 40 25 25 32

5 6

48

25 12 40

25 34 33

49 25

25

40 28 24 24 39

01

Page 80

ID0764533

Desand Cones - View 2 BILL OF MATERIAL: 7350-0059

REF NO. 4 5 6 9 10 12 13 24 25 28 32 33 34 36 39 40 42 45 48 49

PART NUMBER 14MP5116 40MP4460 50MP5100 70MC5229 70MC5230 71MC5233 71MC5234 8FW21108 8FW21112 8HH51407 8HH51564 8HH51565 8HH51569 8HN51112 8LN51108 8LN51112 8LW91112 8PF17096 8PP10004 90MC5230

QTY 2 3 1 8 1 1 1 28 104 14 16 16 8 8 14 40 8 1 2 1

DESCRIPTION VALVE, BUTTERFLY, 6" WAFER W/LEVER GASKET-FLANGE .5" TK.BUNA-N VALVE, BUTTERFLY, 8", LOCKING THREADED STUD,STEEL,3/4-10X8"L SPACER,FLANGE,PIPE,6" PUMP SUCTION,WELDMENT,MCD-1000 PUMP DISCHARGE,WELDMENT WASHER,FLAT,.5N,ZN.PLTD WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX.HD..75-10X 3.25" ZN PLTD SCREW,CAP,HX.HD..75-10X 3.5" ZN PLTD SCREW,CAP,HX.HD.3/4-10X 5" NUT,HEX, .75-10 UNC ZN PLTD NUT,HEX LOCK .5-13 UNC2B NUT,HEX LOCK .75-10 UNC2B WASHER,LOCK,NORDLOCK .75" EXPANSION JOINT,6"X6"L,150#FLG PLUG,PIPE, .25" PIPE,SQ.HEAD 150PSI GASKET-FLANGE 1/2" TK.BUNA-N

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 81

ID0764533

Desand Cones - View 3 BILL OF MATERIAL: 7350-0059

18 28 24 44 40

24

26 39 35

27

46

26

25 25

23

32

41 16

7

4

23

25

30

29 20

17

26

38

01

40

Page 82

ID0764534

Desand Cones - View 3 BILL OF MATERIAL: 7350-0059

REF NO. 4 7 16 17 18 20 23 24 25 26 27 28 29 30 32 35 38 39 40 41 44 46

PART NUMBER 14MP5116 51MP8412 71MC8418 71MC8419 71MC8420 71MC8434 8FW21104 8FW21108 8FW21112 8FW22112 8HH51206 8HH51407 8HH51556 8HH51558 8HH51564 8HH51570 8LN51104 8LN51108 8LN51112 8LW51112 8PF12096 8PF18096

QTY 2 1 2 1 1 1 16 28 104 24 8 14 8 16 16 8 8 14 40 32 2 2

DESCRIPTION VALVE, BUTTERFLY, 6" WAFER W/LEVER MOUNTING STRIP,SEAL,LONG BRACKET,SUPPORT,MANIFOLD BRACKET,MANIFOLD SUPPORT,RIGHT BRACKET,MANIFOLD SUPPORT,LEFT FLAP,MUD,CONES,DESAND WASHER,FLAT,.25N ZN,PLTD WASHER,FLAT,.5N,ZN.PLTD WASHER,FLAT,.75N,ZN.PLTD WASHER,FLAT,3/4W,ZN.PLTD SCREW,CAP,HX.HD,1/4-20X 1-1/4" SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX.HD.3/4-10X 1-1/4" SCREW,CAP,HX.HD..75-10X 1.75" ZN PLTD SCREW,CAP,HX.HD..75-10X 3.25" ZN PLTD SCREW,CAP,HX.HD..75-10X 5.5" ZN PLTD NUT, HEX, LOCK, 1/4-20 NUT,HEX LOCK .5-13 UNC2B NUT,HEX LOCK .75-10 UNC2B WASHER,LOCK,SPLIT .75" CAP,FLANGE,11"OD X .50TK,8 GASKET,PIPE FLG.,6",CL 150

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 83

ID0764534

Desand Manifold Assembly BILL OF MATERIAL: 71MC8422

2

5

6

12

1

3

7

9 8 11 4

10

01

Page 84

ID0741269

Desand Manifold Assembly BILL OF MATERIAL: 71MC8422

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER 71MC8423 71MC8424 27MP8011 8HV21004 8PC30080 8PE34064 8PG24004 8PN20400 8PN20402 8PP10004 8PT10004 71MC8431

QTY 1 1 3 1 15 6 1 2 1 1 1 3

DESCRIPTION DESAND INLET MANIFOLD,WELDMENT MANIFOLD,OVERFLW,DESANDER,WLMT 10" DESANDER CONE, HARRISBURG VALVE,BALL 1/4 FULL PORT COUPLING-VICTAULIC 5"FLEXIBLE ELBOW,VICTAULIC,5" DIA. X 45° GAUGE-PRESSURE W/ ISOLATOR,MUD 100PSI NIPPLE,PIPE,STEEL, .25 NPT NIPPLE,PIPE,STEEL .25NPT X 2"L PLUG,PIPE, .25" PIPE,SQ.HEAD 150PSI TEE,PIPE,BLACK,1/4" NIPPLE,PIPE,VICTAULIC,5"X8-1/2

REMARKS

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 85

ID0741269

Centrifugal Pump BILL OF MATERIAL: 71MC5216

1

9

7 6 12 10

8

2 11

5 3

01

4

Page 86

ID0741156

Centrifugal Pump BILL OF MATERIAL: 71MC5216

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER 71MC5212 71MC5217 8CS31017 8CS31018 8CS31036 8EE43075 8FW21105 8FW21110 8HH51253 8HH51513 8LN51110 8MP30042

QTY 1 1 1 1 1 1 4 16 4 8 8 1

DESCRIPTION GUARD,COUPLING,PUMP BASE,MOTOR/PUMP,WELDMENT HUB,# 10,1.875" SUREFLEX ELEMENT,#10,SUREFLEX HUB,# 10,2-3/8" SUREFLEX MOTOR,ELEC,75HP,1800,365T,TEFC WASHER,FLAT.3125N ZN.PLTD WASHER, FLAT,.625N,ZN PLT SCREW,CAP,HX.HD.5/16-18X 3/4" SCREW,CAP,HX.HD. .625-11X 3" ZN PLTD NUT,HEX LOCK .625-11 UNC2B PUMP,CNTFGL,8X6X11,11" IMP

REMARKS

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 87

ID0741156

Mix/Clean Tank - View 1 BILL OF MATERIAL: 7350-0060

50

23 3

41

10

21

41

22

58

25

15

23

61

20 24

8

1 11 30

26

37

4

68 54 62

01

Page 88

ID0764420

Mix/Clean Tank - View 1 BILL OF MATERIAL: 7350-0060

REF NO. 1 3 4 8 10 11 15 20 21 22 23 24 25 26 30 37 41 50 54 58 61 62 68

PART NUMBER 7300-0966 7300-0972 7300-0976 7300-1806 7300-1810 0HP00012 14MP5221 70MC5201 70MC5330 70MC5330-C 70MC5330-I30 70MC5330-I32 70MC5330-S56 71MC5214 8CL11021 8CL25012 8FW21112 8HH51563 8HV21008 8LN51112 8PE19048 8PE80808 8PN20800

QTY 1 1 1 1 1 1 1 3 3 3 2 1 3 1 1 1 64 12 1 28 1 1 1

DESCRIPTION PIPING,MIX/CLN TNK, M-1200DH BAR,SUPPORT,MIX/CLN TNK HOSE,DRAIN COVER, MIX HOPPER,M-1200DH HOSE,SPRAY WAND, M-1200DH NIPPLE,COMBINATION,BRASS NOZZLE, MUD MIX .75 JET, 3" NPT MALE STABILIZER, FOR 2-3/16" MA AGITATOR, MUD, VERT., MAX2000, CLAMP, CTX, 2-3/16" IMPELLER,30" DIA,W/ BUSHING 2.1875 SF QD IMPELLER,32" DIA,W/ BUSHING SHAFT, AGITATOR, 2.1875" X 56" PUMP,CENTRIFUGAL,ASSEMBLY CLAMP, HOSE, WORM DRIVE, NO.12 CLAMP,ASSY,CUSHION,1.125 ID WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD.3/4-10X 3" VALVE,BALL .5 FULL PORT NUT,HEX LOCK .75-10 UNC2B ELBOW,PIPE,90 DEG 3" ELBOW,PIPE,STREET 90 DEG 1/2" NIPPLE,PIPE,STEEL, .5 NPT

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 89

ID0764420

Mix/Clean Tank - View 2 BILL OF MATERIAL: 7350-0060

7

42 5 38 49 40

13 40

51

40

48

57

40

57 41

28 41

53

17 58

59

16

63

70

13

69

14

18

27

41

51

52

41

46 41

39 39

58

56

01

Page 90

ID0764581

Mix/Clean Tank - View 2 BILL OF MATERIAL: 7350-0060

REF NO. 5 7 13 14 16 17 18 27 28 38 39 40 41 42 46 48 49 51 52 53 56 57 58 59 63 69 70

PART NUMBER 7300-0977 7300-1800 14MP5115 14MP5116 32MC5241 40MP4459 40MP4460 71MC5230 71MC5231 8FW21106 8FW21108 8FW21110 8FW21112 8HH51301 8HH51407 8HH51511 8HH51519 8HH51565 8HH51568 8HN51110 8LN51108 8LN51110 8LN51112 8LW91110 8PF17064 8PP10004 8PF16064

QTY 1 1 2 1 8 1 1 1 1 10 12 40 64 4 6 8 8 16 8 8 6 16 28 8 1 1 1

DESCRIPTION MIX INLET,WELDMENT SUPPORT,MIX HOPPER,M-1200DH VALVE, BUTTERFLY, 4" WAFER W/LEVER VALVE, BUTTERFLY, 6" WAFER W/LEVER THREADED STUD,5/8-11X5-1/2"L GASKET-FLANGE, .5" TK. BUNA-N GASKET-FLANGE .5" TK.BUNA-N PUMP SUCTION,WELDMENT,MIX MANIFOLD,DISCHARGE,WELDMENT WASHER, FLAT, 3/8N ZN PLTD WASHER,FLAT,.5N,ZN.PLTD WASHER, FLAT,.625N,ZN PLT WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD.3/8-16X 1/2" SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX.HD..625-11X 2.5" ZN PLTD SCREW,CAP,HX.HD.5/8-11X 5" SCREW,CAP,HX.HD..75-10X 3.5" ZN PLTD SCREW,CAP,HX.HD..75-10X 4.5" ZN PLTD NUT,HEX, .625-11 UNC ZN PLTD NUT,HEX LOCK .5-13 UNC2B NUT,HEX LOCK .625-11 UNC2B NUT,HEX LOCK .75-10 UNC2B WASHER,LOCK,NORDLOCK 5/8" EXPANSION JOINT,4"X6"L,150#FLG PLUG,PIPE, .25" PIPE,SQ.HEAD 150PSI FLANGE,PIPE,SPACER,4" THRUHOLE

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 91

ID0764581

Mix/Clean Tank - View 3 BILL OF MATERIAL: 7350-0060

55 38 38 45

9

38

43

19

31 44

34

47

01

Page 92

40

6

64

ID0764582

Mix/Clean Tank - View 3 BILL OF MATERIAL: 7350-0060

REF NO. 6 9 19 31 34 38 40 43 44 45 47 55 64

PART NUMBER 7300-0981 7300-1809 50MP5251 8CL21102 8CL21635 8FW21106 8FW21110 8HH51305 8HH51310 8HH51315 8HH51509 8LN51106 8PF18064

QTY 1 2 1 1 1 10 40 4 2 1 8 1 1

DESCRIPTION MIX OUTLET,WELDMENT MOUNT,COVER, MIX HOPPER WAND ASM, WASH, MIX HOPPER H4-SCP,SINGLE COVER PLATE H41050-PP,CLAMP HALF,SET OF 2 WASHER, FLAT, 3/8N ZN PLTD WASHER, FLAT,.625N,ZN PLT SCREW,CAP,HX.HD. .375-16X 1" SCREW,CAP,HX HD, .375-16X 2.25" SCREW,CAP,HX.HD.3/8-16X 3-1/2" SCREW,CAP,HX.HD. .625-11X 2" ZN PLTD NUT,HEX LOCK .375-16 UNC2B GASKET,PIPE FLG,4",CL 150

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 93

ID0764582

Mix/Clean Tank - View 4 BILL OF MATERIAL: 7350-0060

2

65 36 67

32 60 66

12

29

35

33

01

Page 94

ID0764583

Mix/Clean Tank - View 4 BILL OF MATERIAL: 7350-0060

REF NO. 2 12 29 32 33 35 36 60 65 66 67

PART NUMBER 7150-0301 0PT40003 71MC5240 8CL21106 8CL21306 8CL21643 8CL21908 8PB41204 8PG24004 8PN11312 8PN20402

QTY 1 1 1 1 1 1 2 1 1 1 1

DESCRIPTION HOPPER,MIX,STAINLESS,24" TEE,PIPE,SPL,PLATED STL 3/4" SHEAR MIXER, SM 4000 H8-SCP,SINGLE COVER PLATE H8-SWP,SINGLE WELD PLATE H84500-PP,CLAMP HALF,SET OF 2 SCREW,CAP,HX HD,.75-10X 7.25" ZN PLTD 5406-12-4,BUSHING,PIPE,STEEL, GAUGE-PRESSURE W/ ISOLATOR,MUD 100PSI NIPPLE,COMBINATION,STEEL,ZNPLT NIPPLE,PIPE,STEEL .25NPT X 2"L

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 95

ID0764583

Wash Wand Assembly BILL OF MATERIAL: 50MP5251

5

2

3

1

4

6

01

Page 96

ID0719617

Wash Wand Assembly BILL OF MATERIAL: 50MP5251

REF NO. 1

PART NUMBER 7BP20006

QTY 20

2 3 4 5 6

8HV21008 8PB40806 8PC40006 0HP00012 50MP5256

1 1 1 1 1

DESCRIPTION PIPE,STEEL,BLK, 3/8" STD

REMARKS USE 1 @ 20”

VALVE,BALL .5 FULL PORT 5406-8-6,BUSHING,PIPE,STEEL, 5000-6 COUPLING,PIPE 3/8" NIPPLE,COMBINATION,BRASS ORIFICE, 3/16 DIA, 3/8 NPT

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 97

ID0719617

Centrifugal Pump BILL OF MATERIAL: 71MC5214

1 9 7

10

11 13

8 8 6

2

12

4 3 5

01

Page 98

ID0741280

Centrifugal Pump BILL OF MATERIAL: 71MC5214

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13

PART NUMBER 71MC5211 71MC5215 8CS31016 8CS31017 8CS31018 8EE43051 8FW21105 8FW21110 8HH51253 8HH51510 8HH51511 8LN51110 8MP30041

QTY 1 1 1 1 1 1 4 12 4 4 4 4 1

DESCRIPTION GUARD,COUPLING,PUMP BASE,MOTOR/PUMP WELDMENT HUB,#10,2.125" SUREFLEX HUB,# 10,1.875" SUREFLEX ELEMENT,#10,SUREFLEX MOTOR,ELEC,50HP,1800,326T,TEFC WASHER,FLAT.3125N ZN.PLTD WASHER, FLAT,.625N,ZN PLT SCREW,CAP,HX.HD.5/16-18X 3/4" SCREW,CAP,HX.HD. .625-11X 2.25" ZN PLTD SCREW,CAP,HX.HD..625-11X 2.5" ZN PLTD NUT,HEX LOCK .625-11 UNC2B PUMP,CNTFGL,6X5X11,11" IMP

REMARKS

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 99

ID0741280

Inlet/Weir Box Piping BILL OF MATERIAL: 7350-0061

11 8 8 13

2 9 4 7

6

1

5

10

7

7

12 3

01

Page 100

ID0764539

Inlet/Weir Box Piping BILL OF MATERIAL: 7350-0061

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13

PART NUMBER 7300-0992 7300-0983 7150-0299 14MP5116 30MC5208 51MP5207 8FW21108 8FW21112 8HH51406 8HH51407 8HH51570 8LN51108 8LN51112

QTY 1 2 1 2 4 4 24 32 8 8 16 8 16

DESCRIPTION PIPING,IN/WEIR BOXES,M-1200DH WEIR BOX,M-1200DH COUPLING,BAUER,6" FEMALE X M NPT VALVE, BUTTERFLY, 6" WAFER W/LEVER GASKET, 1/8" THK, BUNA-N, 6", COVER,CLEAN-OUT,WEIR BOX WASHER,FLAT,.5N,ZN.PLTD WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD..5-13 X 1.25 ZN PLTD SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX.HD..75-10X 5.5" ZN PLTD NUT,HEX LOCK .5-13 UNC2B NUT,HEX LOCK .75-10 UNC2B

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 101

ID0764539

Inlet Piping BILL OF MATERIAL: 7350-0062

12

5

7

13

14 14 15

9 8 2

8 10

1

4

11

3 6

01

Page 102

ID0764555

Inlet Piping BILL OF MATERIAL: 7350-0062

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PART NUMBER 7300-1005 7300-1013 7300-1014 7300-1056 7300-1060 7150-0300 14MP5115 8FW21110 8HH51519 8LN51110 8PE14064 8PE19064 8PP10012 8PP10032 8PT10032

QTY 1 1 1 1 1 2 2 32 16 16 1 1 2 4 2

DESCRIPTION PIPING,INLET/SPRAY, M-1200DH PIPE,PIPING,INLET/SPRAY PIPE,PIPING,INLET/SPRAY FLANGE,PIPING,INLET/SPRAY FLANGE,PIPING,INLET/SPRAY COUPLING,BAUER,4" FEMALE X M NPT VALVE, BUTTERFLY, 4" WAFER W/LEVER WASHER, FLAT,.625N,ZN PLT SCREW,CAP,HX.HD.5/8-11X 5" NUT,HEX LOCK .625-11 UNC2B ELBOW,PIPE,45 DEG 4" ELBOW, PIPE, 90 DEG. 4" NPT PLUG,PIPE,SQ.HEAD, 3/4" PLUG,PIPE, 2 " PIPE,SQ.HEAD 150PSI TEE,PIPE,BLACK 2" 150PSI

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 103

ID0764555

Desilt Cones - View 1 BILL OF MATERIAL: 7350-0063

3

4 21

39

5

43 34

01

Page 104

ID0764611

Desilt Cones - View 1 BILL OF MATERIAL: 7350-0063

REF NO. 3 4 5 21 34 39 43

PART NUMBER 7300-1022 7300-1028 0HP00012 8CL25012 8HV21008 8PE80808 8PN20800

QTY 1 1 1 1 1 1 1

DESCRIPTION PIPING,CONES,DESILT,M-1200DH HOSE,DRAIN NIPPLE,COMBINATION,BRASS CLAMP,ASSY,CUSHION,1.125 ID VALVE,BALL .5 FULL PORT ELBOW,PIPE,STREET 90 DEG 1/2" NIPPLE,PIPE,STEEL, .5 NPT

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 105

ID0764611

Desilt Cones - View 2 BILL OF MATERIAL: 7350-0063

36 23 13 23 29

6 9 10 41 30

38 33

23

8 23 31 7

11

44

23

36

12 30 23 45 23 36 26 22 22 35

01

Page 106

ID0764612

Desilt Cones - View 2 BILL OF MATERIAL: 7350-0063

REF NO. 6 7 8 9 10 11 12 13 22 23 26 29 30 31 33 35 36 38 41 44 45

PART NUMBER 14MP5116 40MP4460 50MP5100 70MC5229 70MC5230 71MC5218 71MC5229 71MC5232 8FW21108 8FW21112 8HH51407 8HH51564 8HH51565 8HH51569 8HN51112 8LN51108 8LN51112 8LW91112 8PF17096 8PP10004 90MC5230

QTY 3 5 1 8 1 1 1 1 52 152 22 12 16 8 8 22 44 8 1 1 1

DESCRIPTION VALVE, BUTTERFLY, 6" WAFER W/LEVER GASKET-FLANGE .5" TK.BUNA-N VALVE, BUTTERFLY, 8", LOCKING THREADED STUD,STEEL,3/4-10X8"L SPACER,FLANGE,PIPE,6" PUMP,CENTRIFUGAL,ASSEMBLY PUMP SUCTION,WELDMENT PUMP DISCHARGE,WELDMENT WASHER,FLAT,.5N,ZN.PLTD WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX.HD..75-10X 3.25" ZN PLTD SCREW,CAP,HX.HD..75-10X 3.5" ZN PLTD SCREW,CAP,HX.HD.3/4-10X 5" NUT,HEX, .75-10 UNC ZN PLTD NUT,HEX LOCK .5-13 UNC2B NUT,HEX LOCK .75-10 UNC2B WASHER,LOCK,NORDLOCK .75" EXPANSION JOINT,6"X6"L,150#FLG PLUG,PIPE, .25" PIPE,SQ.HEAD 150PSI GASKET-FLANGE 1/2" TK.BUNA-N

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 107

ID0764612

Desilt Cones - View 3 BILL OF MATERIAL: 7350-0063

2 7

28

37

23

1

32

23

23

6

36 35 15 25 22

01

Page 108

22 14

22

26

ID0764613

Desilt Cones - View 3 BILL OF MATERIAL: 7350-0063

REF NO. 1 2 6 7 14 15 22 23 25 26 28 32 35 36 37

PART NUMBER 7300-1017 7300-1019 14MP5116 40MP4460 71MC8410 71MC8411 8FW21108 8FW21112 8HH51404 8HH51407 8HH51562 8HH51570 8LN51108 8LN51112 8LW51112

QTY 2 2 3 5 1 2 52 152 8 22 32 16 22 44 64

DESCRIPTION PIPING,RETURN,WELDMENT PIPING,RETURN,WLMT,M-1200DH VALVE, BUTTERFLY, 6" WAFER W/LEVER GASKET-FLANGE .5" TK.BUNA-N TRAY,MUD,WLMT,MCD-1000 LEG,WLMT,TRAY,CONE,MCD-1000 WASHER,FLAT,.5N,ZN.PLTD WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX HD,1/2-13X 7/8" SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD SCREW,CAP,HX HD,.75-10X 2.75" ZN PLTD SCREW,CAP,HX.HD..75-10X 5.5" ZN PLTD NUT,HEX LOCK .5-13 UNC2B NUT,HEX LOCK .75-10 UNC2B WASHER,LOCK,SPLIT .75"

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 109

ID0764613

Desilt Cones - View 4 BILL OF MATERIAL: 7350-0063

42 40 23

2 20

37 27

29

24

24 36 17 18

19 16

01

Page 110

ID0764614

Desilt Cones - View 4 BILL OF MATERIAL: 7350-0063

REF NO. 2 16 17 18 19 20 23 24 27 29 36 37 40 42

PART NUMBER 7300-1019 71MC8413 71MC8414 71MC8415 71MC8427 71MC8460 8FW21112 8FW22112 8HH51558 8HH51564 8LN51112 8LW51112 8PF12096 8PF18096

QTY 2 2 1 1 1 2 152 8 32 12 44 64 4 4

DESCRIPTION PIPING,RETURN,WLMT,M-1200DH BRACKET,MUD TRAY MANIFOLD,LEFT SUPPORT WELDMENT MANIFOLD,RT SUPPORT WELDMENT FLAP,MUD,ASM,DESILT MANIFOLD,ASM,DESILT,MCD-1000 WASHER,FLAT,.75N,ZN.PLTD WASHER,FLAT,3/4W,ZN.PLTD SCREW,CAP,HX.HD..75-10X 1.75" ZN PLTD SCREW,CAP,HX.HD..75-10X 3.25" ZN PLTD NUT,HEX LOCK .75-10 UNC2B WASHER,LOCK,SPLIT .75" CAP,FLANGE,11"OD X .50TK,8 GASKET,PIPE FLG.,6",CL 150

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 111

ID0764614

Desilt Manifold Assembly BILL OF MATERIAL: 71MC8460

2 1

7 12 9

8 11

4

6 8

3 10 5

01

Page 112

ID0741430

Desilt Manifold Assembly BILL OF MATERIAL: 71MC8460

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER 71MC8470 27MP8009-1 8FW21108 8HH51409 8LN51108 8PT10004 8PG24004 8PN20400 8PN20402 8PP10004 8HV21004 8PE18004

QTY 1 10 80 40 44 1 1 2 1 1 1 1

DESCRIPTION MANIFOLD,DESILT,WLMT,MCD-1000 CONE, DESILTER 5" W/O STANDOFF WASHER,FLAT,.5N,ZN.PLTD SCREW,CAP,HX.HD. .5-13 X 2" ZN PLTD NUT,HEX LOCK .5-13 UNC2B TEE,PIPE,BLACK 1/4" GAUGE-PRESSURE W/ ISOLATOR,MUD 100PSI NIPPLE,PIPE,STEEL, .25 NPT NIPPLE,PIPE,STEEL .25NPT X 2"L PLUG,PIPE, .25" PIPE,SQ.HEAD 150PSI VALVE,BALL 1/4 FULL PORT ELBOW,PIPE,STREET,90DEG .25"

REMARKS

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 113

ID0741430

Desilt Mud Flap

BILL OF MATERIAL: 71MC8427

1 4

5 3

2

6

01

Page 114

ID0741433

Desilt Mud Flap

BILL OF MATERIAL: 71MC8427

REF NO. 1 2 3 4 5 6

PART NUMBER 71MC8428 71MC8429 8FW21108 71MC8435 8HH51406 8LN51108

QTY 1 1 5 1 5 5

DESCRIPTION BRACKET,MUD FLAP MUD FLAP,DESILT CONES WASHER,FLAT,.5N,ZN.PLTD PLATE,WASHER,FLAP,MUD,DESILT SCREW,CAP,HX.HD..5-13 X 1.25 ZN PLTD NUT,HEX LOCK .5-13 UNC2B

REMARKS

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 115

ID0741433

Notes:

Page 116

Centrifugal Pump Parts Table of Contents Centrifugal Pump Parts ............................118 CFP - 6X5X11 11 Inch Impeller.............. 120

CFP - 8X6X11 11 Inch Impeller.............. 122 CFP - 8X6X14 11.5 Inch Impeller.......... 124

Page 117

Centrifugal Pump Parts BILL OF MATERIAL: 8MP30041, 8MP30042, 8MP30043

01

Page 118

ID0741490

Centrifugal Pump Parts BILL OF MATERIAL: 8MP30041, 8MP30042, 8MP30043

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

PART NUMBER 8MP3S250-01 8MP3S250-02 8MP3S250-03 8MP3S250-04 8MP3S250-05 8MP3S250-06 8MP3S250-07 8MP3S250-08 8MP3S250-09 8MP3S250-10 8MP3S250-11 8MP3S250-12 8MP3S250-13 8MP3S250-18 8MP3S250-19 8MP3S250-20 8MP3S250-21 8MP3S250-22 8MP3S250-23 8MP3S250-24 8MP3S250-25 8MP3S250-26 8MP3S250-27 8MP3S250-28 8MP3S250-29 8MP3S250-30 8MP3S250-31 8MP3S250-32 8MP3S250-33 8MP3S250-34 8MP3S250-35

QTY -

DESCRIPTION PEDESTAL SHAFT OUTBOARD BEARING HOUSING PACKING GLAND INBOARD BEARING SLINGER RING WATER INBOARD BEARING COVER OUTBOARD BEARING OUTBOARD BEARING COVER MECHANICAL SEAL GLAND BOLT ASSEMBLY SHAFT SLEEVE, CERAMIC STUFFING BOX FOR MECHANICAL SEAL IMPELLER SEAL, O-RING SHAFT SEAL, O-RING INBOARD BEARING OIL SEAL INBOARD EXCLUSION SEAL OUTBOARD BEARING OIL SEAL INBOARD BEARING COVER GASKET OUTBOARD BEARING HOUSING SEAL, O-RING OUTBOARD BEARING COVER SEAL, O-RING BEARING LOCK NUT KIT OUTBOARD BEARING COVER BOLT BEARING HOUSING BOLT INBOARD BEARING COVER BOLT BEARING COVER PLUG STUFF BOX BOLT OIL DRAIN PLUG ZERK GREASE FITTING OIL DIP STICK COUPLING KEY

REMARKS

SEE NOT SHOWN SEE NOT SHOWN

SEE NOT SHOWN

SEE NOT SHOWN

NOT SHOWN: 8MP3S250-10G 8MP3S250-11A 8MP3S250-20A 8MP3S250-23A

-

PACKING GRAPHITE CLEVIS GLAND BOLT OIL SEAL KIT POWER END GASKET KIT

FOR ITEM 10 FOR ITEM 11 FOR ITEM 20 FOR ITEM 23

FOOTNOTES: NOTE:

01

Page 119

ID0741490

CFP - 6X5X11 11 Inch Impeller BILL OF MATERIAL: 8MP30041

02

Page 120

ID0741527

CFP - 6X5X11 11 Inch Impeller BILL OF MATERIAL: 8MP30041

REF NO. 14 15 16 17 36

PART NUMBER 8MP30024-14 8MP3S250-15561H 8MP3S250-16 8MP3S250-17 8MP3S250-15B561

QTY -

DESCRIPTION IMPELLER (11")

REMARKS

HOUSING ASSEMBLY HOUSING STUD WITH NUT HOUSING GASKET CASING WEAR PAD

NOT SHOWN: 8MP3S250-17A

-

FLUID END GASKET KIT

FOOTNOTES: NOTE:

02

Page 121

ID0741527

CFP - 8X6X11 11 Inch Impeller BILL OF MATERIAL: 8MP30042

02

Page 122

ID0741503

CFP - 8X6X11 11 Inch Impeller BILL OF MATERIAL: 8MP30042

REF NO. 14 15 16 17 36

PART NUMBER 8MP30024-14 8MP3S250-15681H 8MP3S250-16 8MP3S250-17 8MP3S250-15B681

QTY -

DESCRIPTION IMPELLER (11")

REMARKS

HOUSING ASSEMBLY HOUSING STUD WITH NUT HOUSING GASKET CASING WEAR PAD

NOT SHOWN: 8MP3S250-17A

-

FLUID END GASKET KIT

FOOTNOTES: NOTE:

02

Page 123

ID0741503

CFP - 8X6X14 11.5 Inch Impeller BILL OF MATERIAL: 8MP30043

02

Page 124

ID0741460

CFP - 8X6X14 11.5 Inch Impeller BILL OF MATERIAL: 8MP30043

REF NO. 14 15 16 17 36

PART NUMBER 7500–0059 8MP3S250-15684H 8MP3S250-16 8MP3S250-17 8MP3S250-15B684

QTY -

DESCRIPTION IMPELLER,11.5"RH,FOR 250 6X8X14 HOUSING ASSEMBLY HOUSING STUD WITH NUT HOUSING GASKET CASING WEAR PAD

REMARKS

NOT SHOWN: 8MP3S250-17A

-

FLUID END GASKET KIT

FOOTNOTES: NOTE:

02

Page 125

ID0741460

Notes:

Page 126

Shaker Section Table of Contents Shaker Assembly - View 1 ...................... 128

Shaker Assembly - Detail A.................... 130

Page 127

Shaker Assembly - View 1 BILL OF MATERIAL: 7350-0052

DETAIL A

10

12 1 8

01

Page 128

ID0764650

Shaker Assembly - View 1 BILL OF MATERIAL: 7350-0052

REF NO. 1 8 10 12

PART NUMBER 15MP5038 8FW21112 8HH51557 8LW91112

QTY 4 32 32 32

DESCRIPTION SHAKER,DERRICK,HYPERPOOL,4PNL WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD .75-10X 1.5" ZN PLTD WASHER,LOCK,NORDLOCK .75"

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 129

ID0764650

Shaker Assembly - Detail A BILL OF MATERIAL: 7350-0052

15 18

16

14

18 16 16

19

19

16

16

17

16

13

19

11 7 6

7 9

01

Page 130

ID0764652

Shaker Assembly - Detail A BILL OF MATERIAL: 7350-0052

REF NO. 6 7 9 11 13 14 15 16 17 18 19

PART NUMBER 71MC8425 8FW21108 8HH51406 8LN51108 51MP8411 51MP8412 51MP8413 8FW21104 8HH51205 8HH51206 8LN51104

QTY 4 32 16 16 2 2 4 44 6 16 22

DESCRIPTION SPLASH GUARD,SHAKER OUTLET WASHER,FLAT,.5N,ZN.PLTD SCREW,CAP,HX.HD..5-13 X 1.25 ZN PLTD NUT,HEX LOCK .5-13 UNC2B SEAL,SPLASH,RUBBER,WEIR BOX MOUNTING STRIP,SEAL,LONG MOUNTING STRIP,SEAL,SHORT WASHER,FLAT,.25N ZN,PLTD SCREW,CAP,HX.HD, .25-20X 1" SCREW,CAP,HX.HD,1/4-20X 1-1/4" NUT, HEX, LOCK, 1/4-20

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 131

ID0764652

Notes:

Page 132

Options Section Table of Contents Washdown System - View 1................... 134 Washdown System - View 2................... 136 Supercharge Pump - View 1 .................. 138

Supercharge Pump - Detail A ................ 140 Canopy Assembly..................................... 142 Pit Pump...................................................... 144

Page 133

Washdown System - View 1 BILL OF MATERIAL: 70MC8025

37

38

24

1

4 30 40 39

8

7

6 9

20

25

17

27 16

25 19 22

01

5

32

10

26

Page 134

ID0741455

Washdown System - View 1 BILL OF MATERIAL: 70MC8025

REF NO. 1 4 5 6 7

PART NUMBER 50MP1660 25GB1124 27MP8004 40GB1611 7HB01024

QTY 1 1 1 1 100

8 9 10 16

40MP8018 40MP8019 51MP8029 7HB33006

1 1 1 50

GUN-SPRAY10GPM MAX,5000PSI MAX,.375NPTF LANCE-FOR SPRAY GUN,35.50" SS, .25" MNPT NOZZLE,SPRAY,15 DEG,.25 MNPT, #3 SIZE HOSE,HYDRAULIC,.375",2600 PSI

USE 1 @ 50"

17

7HB33006

1,200

HOSE,HYDRAULIC,.375",2600 PSI

USE 1 @ 1200"

19 20 22 24 25 26 27 30 32 37 38 39 40

8FW21106 8FW21108 8HH51306 8HP22101 8HP22103 8LN51106 8LN51108 8PB40604 8PC40004 8QD08204 8QD08204-01 8QD52204 8QD55204

12 4 4 1 2 4 4 2 1 1 1 1 1

WASHER,FLAT,.375N ZN PLTD WASHER,FLAT,.5N,ZN.PLTD SCREW,CAP,HX.HD. .375-16X 1.25" FITTING,HOSE END .25 NPT MALE FITTING,HOSE END, .5 NPT MALE NUT,HEX LOCK .375-16 UNC2B NUT,HEX LOCK .5-13 UNC2B 5406-6-4,BUSHING,PIPE,STEEL, .5X.25 NPT COUPLING PIPE, 5000-4-4 .25" 3000PSI PDC-4 CAP,DUST,PLASTIC PDP-4 PLUG,DUST,PLASTIC VHC4-4F HYD,QD,COUPLER 6500PSI .25NPTF VHN4-4M HYD,QD,NIPPLE 6500PSI .25NPTM

DESCRIPTION BASE,WELDMENT,WASHDOWN,110 GAL TANK,H20,110 GAL,POLY,TOP FILL HOSE REEL,SINGLE,1/2" FNPT STRAP,FOR WASHDOWN SYSTEM

REMARKS

SLEEVE,HOSE,NYLON,FOR24 HOSE BLACK

USE 2 @ 50"

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 135

ID0741455

Washdown System - View 2 BILL OF MATERIAL: 70MC8025

11

2

31

29

30 21

36

23

35

13

33

28

19

3

01

34

14

Page 136

12

18

15

ID0741475

Washdown System - View 2 BILL OF MATERIAL: 70MC8025

REF NO. 2 3 11 12 13 14 15

PART NUMBER 8EE41015 8MP52020 293009 0HP00012 0PE40001 40MP4501 7HB13012

QTY 1 1 1 1 1 1 30

DESCRIPTION MOTOR,ELEC,3HP,1750,TEFC,480V PUMP ASM,WASHDWN,W/ADAPTER AND GAUGE 0 - 3000 PSI NOSHOK # NIPPLE,COMBINATION,BRASS ELBOW,PIPE,SPL Y-STRAINER, .5 NPT,20 MESH SCN

REMARKS

HOSE,HYDRAULIC,3/4" SUCTION

USE 1 @ 30"

18 19 21 23 28 29 30 31 33 34 35 36

8CL11021 8FW21106 8HH51305 8HO22202 8LW51106 8OA10606 8PB40604 8PB42012 8PN11312 8PN40008 8PP10020 8PT40206

2 12 4 1 4 1 2 1 1 1 1 1

CLAMP, HOSE, WORM DRIVE, NO.12 WASHER,FLAT,.375N ZN PLTD SCREW,CAP,HX.HD. .375-16X 1" FITTING,HOSE END,1JC43-6-6 WASHER,LOCK,SPLIT .375" 6-6-FLO,ORFS MALE CONNECTOR 5406-6-4,BUSHING,PIPE,STEEL, .5X.25 NPT 5406-20-12,BUSHING,PIPE,STEEL, NIPPLE,COMBINATION,STEEL,ZNPLT 5404-8-8,NIPPLE,PIPE,1/2 PLUG,PIPE,SQ.HEAD, 1 1/4" 5602-6-6,MALE RUN TEE

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 137

ID0741475

Supercharge Pump - View 1 BILL OF MATERIAL: 7350-0050

2

7

DETAIL A

5

5

10

01

Page 138

ID0765235

Supercharge Pump - View 1 BILL OF MATERIAL: 7350-0050

REF NO. 2 5 7 10

PART NUMBER 7300-1039 8FW21108 8HH51407 8LN51108

QTY 1 12 6 6

DESCRIPTION SUPERCHARGE PUMP,WLDMNT,M1200DH WASHER,FLAT,.5N,ZN.PLTD SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD NUT,HEX LOCK .5-13 UNC2B

1

HOSE,SUCTION,ASSEMBLY,6 IN. X 20 FT.

REMARKS

NOT SHOWN: 14

7280-0002

FOOTNOTES: NOTE:

01

Page 139

ID0765235

Supercharge Pump - Detail A BILL OF MATERIAL: 7350-0050

8 6 1

6 11 3 13

9

6 12

6 11 4

01

Page 140

ID0765236

Supercharge Pump - Detail A BILL OF MATERIAL: 7350-0050

REF NO. 1 3 4 6 8 9 11 12 13

PART NUMBER 7150-0414 7300-1057 71MC5214 8FW21112 8HH51561 8HH51563 8LN51112 8PF18080 8PF18096

QTY 2 1 1 48 16 8 24 1 2

DESCRIPTION COUPLING,BAUER,6" MALE X FLANGE DISCHARGE,WLMT,SUPERCHARGE,M1200DH PUMP,CENTRIFUGAL,ASSEMBLY WASHER,FLAT,.75N,ZN.PLTD SCREW,CAP,HX.HD..75-10X 2.5" ZN PLTD SCREW,CAP,HX.HD.3/4-10X 3" NUT,HEX LOCK .75-10 UNC2B GASKET,PIPE FLG,5",CLASS 150 GASKET,PIPE FLG.,6",CL 150

REMARKS

NOT SHOWN: FOOTNOTES: NOTE:

01

Page 141

ID0765236

Canopy Assembly BILL OF MATERIAL: 7350-0055

12

10 5

11

4

9

3 2 1

7 8 6

01

Page 142

ID0765237

Canopy Assembly BILL OF MATERIAL: 7350-0055

REF NO. 1 2 3 4 5 6 7 8 9 10 11 12

PART NUMBER 7300-1031 7300-1032 7300-1033 7300-1035 7300-1036 7300-1037 51MP0910 51MP0911 51MP0912 51MP0913 51MP0914 51MP0950

QTY 5 2 1 2 1 4 2 4 6 2 3 1

DESCRIPTION PIPE,CANOPY,TOP,MAIN,120-1/8"LG PIPE,CANOPY,SIDE,92-1/4"LG PIPE,CANOPY,CROSSMEMBER,5"LG PIPE,CANOPY,CROSSMEMBER,32-5/16"LG PIPE,CANOPY,CROSSMEMBER,22-5/8"LG PIPE,SUPPORT,MAIN,CANOPY ELBOW,ADJ. ANGLE,THRU,1" PIPE ELBOW,90 DEG,1" PIPE TEE,THRU HOLE,1" PIPE TEE,ADJUSTABLE ANGLE 1" PIPE CROSS,THRU HOLE,1" PIPE TARP,18OZ,VINYL,8'X10', BLUE

REMARKS

NOT SHOWN: 13

51MP0915

1

BALL BUNGEE SNUGGERS

FOOTNOTES: NOTE:

01

Page 143

ID0765237

Pit Pump

BILL OF MATERIAL: 7350-0054

10

9

1 2

4

7

6

6 3 8 5

01

Page 144

ID0765507

Pit Pump

BILL OF MATERIAL: 7350-0054

REF NO. 1 2 3 4 5 6 7 8 9 10

PART NUMBER 8MP22150 70MC5235 70MC5237 30GB2170 8CP50600 8FW21108 8HH51407 8LN51108 8PC21096 7150-0464

QTY 1 1 1 1 1 8 4 4 1 1

DESCRIPTION PUMP,PIT,20HP,460/3/60,100'CBL PIT PUMP STAND,WELDMENT PIN,RETAINER,PIT PUMP LINK,SNAP 5/16" X 2-3/8" PIN,LINCH,.1875 X 1.25 WASHER,FLAT,.5N,ZN.PLTD SCREW,CAP,HX.HD. .5-13 X 1.5 ZN PLTD NUT,HEX LOCK .5-13 UNC2B COUPLING,PIPE,STEEL 6"NPT COUPLING,BAUER,6" MALE X M NPT

REMARKS

NOT SHOWN: 11

7280-0003

2

HOSE,DISCHARGE,ASSEMBLY,6 IN. X 50 FT

FOOTNOTES: NOTE:

01

Page 145

ID0765507

Notes:

Page 146

Electrical Section Table of Contents Electrical Installation ................................ 148 Electrical Controls..................................... 150

Electrical Schematic................................. 156 Disconnect Panel Schematic ................. 160

Page 147

Electrical Installation BILL OF MATERIAL: 71MC9602

ELECTRICAL INSTALLATION BILL OF MATERIAL: 71MC9602

The electrical schematic is included in this manual at the end of this section.

For all other electrical items only the bill of material is shown.

01

Page 148

ID0765399

Electrical Installation BILL OF MATERIAL: 71MC9602

REF NO.

PART NUMBER 71MC9712 71MC9502

QTY 1 1

DESCRIPTION ELEC.CONTROLS,M1200DH SCHEMATIC,ELECTRICAL,M1200DH

REMARKS LAYOUT AASCHM

DISCONNECT PANEL,450A CABLES,PIN-PLUG,350MCM,B/O/Y/G INSTRUCTION,MCD1000 DISCONNECT FIELD KIT,MCD1000 DISCONNECT

AA-DSC DSCCBL DSCINS DISCKIT

NOT SHOWN: 7070-0021 6EC20100 6ED20100 71MC9750-1

1 2 1 1

FOOTNOTES: NOTE:

01

Page 149

ID0765399

Electrical Controls BILL OF MATERIAL: 71MC9712

ELECTRICAL CONTROLS BILL OF MATERIAL: 71MC9712

01

Page 150

ID0765522

Electrical Controls BILL OF MATERIAL: 71MC9712

REF NO.

01

PART NUMBER 6EP19015 8ES30025 8ES40575 8EB10022 8ET35801 8ET35401 7EW12144

QTY 1 1 1 1 2 1 15

8EN11005 8EN10722 8EN11007-1 8EN10513 70MC9921 8EC10076 8EC10086 8EB10017 8ES40566

1 1 1 1 1 1 1 1 3

8ES40558 8ES40558 8ES40575 8EB20015 8EB20015 8EB20015 8EB20015 8ET11110 7EC23111

1 1 1 1 1 1 1 1 30

CABLE,TYPE SDN,16/3

CB01 CB02 CB03 CB08 CB09 CB10 CB11 CB20 CBL03 (USE 30 LF)

7EC31004

55

CABLE,14/4,TYPE P,UNARMORED

CBL04C (USE 55 LF)

7EC31004

45

CABLE,14/4,TYPE P,UNARMORED

CBL04D (USE 45 LF)

7EC31004

35

CABLE,14/4,TYPE P,UNARMORED

CBL04E (USE 35 LF)

7EC21201

60

CABLE,SOOW,10/6,20AMP,600V

CBL06A (USE 60 LF)

7EC31010

55

CABLE,14/10,TYPE P UNARMORED

CBL10A (USE 55 LF)

7EC31010

45

CABLE,14/10,TYPE P UNARMORED

CBL10B (USE 45 LF)

7EC31010

40

CABLE,14/10,TYPE P UNARMORED

CBL10C (USE 40 LF)

7EC31010

30

CABLE,14/10,TYPE P UNARMORED

CBL10D (USE 30 LF)

7EC22141

122

CABLE,PERFECT-A-FLEX,14/24

CBL24_ (USE 122 LF)

7EC42111

50

CABLE,4/4 TYPE-W,93AMP,600V,

CBL30 (USE 50 LF)

6EP19002 6EP19004 6EP19007 6EP19012 8EP19015 6EP19015 6EP19003 8EP48160 8EP48163 8EP48160 8EP48163 8ET00202

1 9 10 4 1 1 6 1 1 1 1 196.8

CORD GRIP ASSY 8EP19002 CORD GRIP ASSY. 8EP19004 CORD GRIP ASSY 8EP19007 CORD GRIP ASSY. 8EP19012 CORD GRIP, 1.188 - 1.375 1"HUB CORD GRIP ASSY. 8EP19015 CORD GRIP ASSY 8EP19003 SOCKET,8PIN,W/CODESYSTEM&LABEL RELAY,ICECUBE,8PIN,DPDT,120VAC SOCKET,8PIN,W/CODESYSTEM&LABEL RELAY,ICECUBE,8PIN,DPDT,120VAC DIN RAIL,MOUNTING DIN#3

CG02 CG04 CG07 CG12 CG15 CG15 CG3 CR01 CR01 CR02 CR02 DIN (USE 196.8 LI)

8ET01002

1

DIST.BLOCK;1@500–6@2/0,3pole

DISTR1

8ET01002-1

3

COVER FOR DIST.BLOCKS 68-69___

DISTR1

8ET01001

1

DIST.BLOCK;2/350–6@2/0,1pole

DISTR2

15GB7108-G 8ET20009 8HH51403

2 4 5

ASSEMBLY,GROUND STAKE LUG,1/0,CRIMP,COPPER, .5"HOLE SCREW,CAP,HX.HD.1/2-13X 3/4

GND GND GND

DESCRIPTION CORD GRIP ASSY. 8EP19015 OVERLOAD RELAY 20-100A F FRM CIRCUIT BREAKER; 125A,600V,3PH AUX CONTACT,CONTACTOR F,TOP TERM,RING,NYLON YEL 12-10AWG TERM,RING,NYLON YEL 12-10AWG WIRE,THHN,10AWG,GREEN ENCLOSURE,HOFF.60X36X16 NEMA-4 PANEL,BACK,60X36 PLATE,STIFFENER FOR 8EN11007 ENCLOSURE,HOFFMAN 16 PUSHBUTTN OVERLAY,REMOTE CONTROL BOX ANGLE BOX MNT,FOR 60A M/F ANGLE BOX MNT,FOR 100A M/F MMP, BUS, 3PH, 4 POS, B FRAME ADAPTER,DIN RAIL, BREAKER E FR CIRCUIT BREAKER;150A, 600V,3PH CIRCUIT BREAKER;150A, 600V,3PH CIRCUIT BREAKER; 125A,600V,3PH CIRCUIT BREAKER;3P,15A D CURVE CIRCUIT BREAKER;3P,15A D CURVE CIRCUIT BREAKER;3P,15A D CURVE CIRCUIT BREAKER;3P,15A D CURVE CIRCUIT BREAKER;1P,10A,D CURVE

Page 151

REMARKS

AUX BOND BOND BOND (USE 15 LF) BOX1 BOX1 BOX1 BOX2 BOX2 BOXPP BOXSC BUS4 CB_DIN

ID0765522

Electrical Controls BILL OF MATERIAL: 71MC9712

REF NO.

01

PART NUMBER 8LW51108 15GB7143 15GB7141 7EC51104

QTY 5 2 2 22

DESCRIPTION WASHER,LOCK,SPLIT .5" TERMINAL, BOLT ON, 1-AF, 45 DEG PLUG, GROUNDING, MALE CABLE,WELD,GREEN,1/O,FLEX-A-PRENE

REMARKS GND GND GND GND (USE 22 LF)

8EP91124 8EN11902 8EP60010 8EP60012 8EB10013 8EB10012 8EP02752 6EC61031 7EC23112

2 1 1 1 1 1 4 4 85

HOLE SEAL,1.25MAX INTERLOCK,NEMA4 ENCLOSURE DOOR LIMIT SWITCH, NO LEVER, SEALED LIMIT SWITCH-OPER LEVER 2 INCH MMP, LINE SIDE ADAPTER,FRAME B MMP,LINE SIDE ADAPTER, FRAME D FLOOD LIGHT,LED,12-24V,2500LUM PLUG ASSY./ 2 SOCKET CABLE,TYPE SDN,16/4

HS01 LOCK LS1 LS1 LSA-B LSA-D LT01 LT01 LT01 (USE 85 LF)

8EC70510-1 8ES20016 8EB10022 8ES20016 8EB10022 8ES20015 8EB10022 8ES20012 8ES20012 8ES20012 8ES20012 8ES20015 8EB10001-32 8EB10001-10 8EB10001-10 8EB10001-10 8EB10001-10 8ES30025 8ES30025 8ES30025 8ES30022

2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 8

4 PIN MALE PLUG, 12MM CONTACTOR,MOTOR,95AMP,IEC AUX CONTACT,CONTACTOR F,TOP CONTACTOR,MOTOR,95AMP,IEC AUX CONTACT,CONTACTOR F,TOP CONTACTOR,MOTOR,72AMP,IEC AUX CONTACT,CONTACTOR F,TOP CONTACTOR,MOTOR,9 AMP, IEC CONTACTOR,MOTOR,9 AMP, IEC CONTACTOR,MOTOR,9 AMP, IEC CONTACTOR,MOTOR,9 AMP, IEC CONTACTOR,MOTOR,72AMP,IEC MMC,25-32A;D-MMP,C-CONT,120VAC MMC,6.3-10A;B-MMP,B-CONT,120V MMC,6.3-10A;B-MMP,B-CONT,120V MMC,6.3-10A;B-MMP,B-CONT,120V MMC,6.3-10A;B-MMP,B-CONT,120V OVERLOAD RELAY 20-100A F FRM OVERLOAD RELAY 20-100A F FRM OVERLOAD RELAY 20-100A F FRM OVERLOAD RELAY,4-6A, C FRAME

LT-P1 M01 M01 M02 M02 M03 M03 M08 M09 M10 M11 MMC04 MMC05 MMC06 MMC12 MMC13 MMC14 OL01 OL02 OL03 OL8_11

8ES30023

8

ADAPTER, PANEL MOUNT; C FRAME

OL8_11

71MC9901 8NP00286 8EC70522-CL 8EO45007 8EO45007 8EO45007-01 8EP86300 6EE12015 6EE12014 8EC70416-30M 8EC70405-3M 8EC70002 8EC70001 8EC10012 8EC10013 7ES11018 8EC10011 8EC10013 8EC10015

1 1 2 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1

OVERLAY,FULL SET; MCD1000+ OVERLAY,SUPER-PIT-MUD CAP;12mm,FEMALE,LOOP.75" PUSH-PULL;ILLUM.;RED;120VOLT PUSH-PULL;ILLUM.;RED;120VOLT GUARD FOR 40MM PUSH-PULL CLAMP, P RATCHET; .24" TO .54" PENDANT;START,STOP;SUPERCHARGE PENDANT;START,STOP FOR TRASH CORDSET, 4-16AWG, STR MALE/FEM RECPT,4SOC,1/2-14NPST,3M-LEAD CAP-LANYARD/EYE; MATES TO FEM. CAP-LANYARD/EYE; MATES TO MALE RECEP,FEMALE W/TWO PILOTS HANDLE,FOR 30A MALE/FEMALE ENGRAVABLE LUGGAGE TAG,WHITE PLUG,MALE INLET W/TWO PILOTS HANDLE,FOR 30A MALE/FEMALE PROTECTIVE CAP F/30A MALE ONLY

OLAYA OLAYPP P1CAP PB01A PB01B PB01B PCLMP PEND01 PEND02 PG4CBL PG4F PG4F PG4M PLG1F PLG1F PLG1F PLG1M PLG1M PLG1M

Page 152

ID0765522

Electrical Controls BILL OF MATERIAL: 71MC9712

REF NO.

01

PART NUMBER 7ES11018 8EC10083 8EC10081 8EC10072 8EC10082 8ED00001 8ED00006 8ED01480 8ED01120 8ED020AC 8ED02SINGLE 8ED02SINGLE-01 8ED02THREE 8ED02THREE-01 8ED00009 8NP41492 8NP41492-01 8NP41491 8ED00010 8ED00006 8ED00001 8ED01120/208 8ED02120 8ED00009 8ED01480-3 8NP41491 8NP47296 8NP41160 8NP41779 8EO90404

QTY 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 26

DESCRIPTION ENGRAVABLE LUGGAGE TAG,WHITE HANDLE,FOR 100A M/F DS100C INLET,MALE W/TWO PILOTS 100A RECEP,FEMALE W/TWO PILOTS 60A RECEP,FEMALE W/TWO PILOTS 100A DECAL"DANGER ELEC.EQUIP." DANGER; LOCK OUT ELECTRICAL DECAL "DANGER-480 VOLTS" DECAL "DANGER-120 VOLTS" DECAL "AC" 1-1/8" X 4" DECAL "SINGLE PHASE" 1-1/8X4 DECAL "SINGLE PHASE" 1-1/8X4 DECAL "THREE PHASE" 1-1/8X4 DECAL "THREE PHASE" 1-1/8X4 DECAL "DANGER ARC FLASH..."

DECAL,WARNING-LOCKOUT MAIN CIR DECAL,WARNING-LOCKOUT MAIN CIR DECAL,WARNING-RISK OF ELEC....

DECAL "WARNING ARC FLASH..."

DANGER; LOCK OUT ELECTRICAL DECAL"DANGER ELEC.EQUIP." DECAL "DANGER-120/208 VOLTS" DECAL "120 VOLTS" 1-1/8" X 4" DECAL "DANGER ARC FLASH..."

DECAL-DANGER 480 VOLTS-3PHASE DECAL,WARNING-RISK OF ELEC....

DECAL; BATTERY LOCKOUT SWITCH SIGN:"WARNING-ENGINE MUST BE" LABEL,DO NOT PRESSURE WASH 3" DIA BOOT,SEL.SW.,BLK HYPALON

8EO13019

26

SEL.SW.3POS.SPR.RTN.,RT.-CNT.

SS___

8EP13204 8EP22106 8EP13104

8 6 175

SEALTITE CONNECTOR STRT 1-1/4" BUSHING, PLASTIC 1.25"

7EW12191

350

SEALTITE 1-1/4" WIRE,TFFN/THHN,2AWG,115AMP

ST125 ST125 ST125 (USE 175 LF)

7EW12171

60

WIRE,TFFN/THHN,4AWG,85AMP

ST125 (USE 60 LF)

8EP13206 8EP22108 7EW12201

2 2 450

SEALTITE CONNECTOR STRAIGHT 2" BUSHING, PLASTIC 2"

ST200 ST200 ST200 (USE 450 LF)

8EP13106

7

8EP13207 8EP22109 7EC53101

2 2 100

8EP13107

7

8EP13201 8EP13101

2 11

7EW11201 8ET03301 8ET03392 8ET03401 8ET03492 8ET03942 8ET03945 8ET03991-1 8ET01802

WIRE,TFFN/THHN,1AWG,130AMP SEALTITE 2" SEALTITE CONCTR STRAIGHT 2-1/2 BUSHING, PLASTIC 2.5" CABLE,LOCOMOTIVE,4/0AWG,400AMP

REMARKS PLG1M PLUGSC PLUGSC RECPP RECSC SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN01 SIGN02 SIGN02 SIGN02 SIGN02 SIGN02 SIGN02 SIGN03 SIGN03 SIGN03 SIGN03 SIGN03 SIGN04 SS__

ST125 (USE 350 LF)

ST200 (USE 7 LF) ST250 ST250 ST250 (USE 100 LF) ST250 (USE 7 LF)

60

SEALTITE 2-1/2" SEALTITE CONECTR STRAIGHT 1/2" SEALTITE 1/2" WIRE,MTW,12AWG,BLACK

ST50 (USE 60 LF)

46 4 85 2 3 2 4 24

TERMINAL;1X2,GREY END PLATE FOR 8ET03301 TERMINAL;2X2,GREY END PLATE FOR 8ET03401 JUMPER,PUSH-IN,2-WAY JUMPER,PUSH-IN,5-WAY END STOP/TERMINALS 10mm WIDE TERMINAL BLOCK, END STOP

TERM TERM TERM TERM TERM TERM TERM TERM

Page 153

ST50 ST50 (USE 11 LF)

ID0765522

Electrical Controls BILL OF MATERIAL: 71MC9712

REF NO.

PART NUMBER 7EW10601

QTY 50

DESCRIPTION WIRE,MTW,6AWG,BLACK,19STRAND

REMARKS WIREBK (USE 50 LF)

7EW11004

13

WIRE,MTW,10AWG,GRN,500'SPOOL

WIREGR (USE 13 LF)

7EW11603

20

WIRE,MTW,16AWG,RED

WIRERD (USE 20 LF)

7EW11602

20

WIRE,MTW,16AWG,WHITE

WIREWH (USE 20 LF)

7ES05222

2

WIREWAY 1.0W X 3.0H

WW1 (USE 2 LF)

7ES05229

6

WIREWAY 2.0W X 4.0H

WW2 (USE 6 LF)

7ES05305

6

WIREWAY COVER 2"W X 6'

WW2 (USE 6 LF)

7ES05230

18

WIREWAY 3.0W X 4.0H

WW3 (USE 18 LF)

7ES05306

18

WW3 (USE 18 LF)

8EP83201

1

WIREWAY COVER 3"W X 6' TRANSFORMER,500VA,

XFRM

NOT SHOWN:

FOOTNOTES: NOTE:

01

Page 154

ID0765522

Notes:

Page 155

Electrical Schematic BILL OF MATERIAL: 71MC9502

ELECTRICAL SCHEMATIC BILL OF MATERIAL: 71MC9502

01

Page 156

ID0765502

Electrical Schematic BILL OF MATERIAL: 71MC9502

01

Page 157

ID0765502

Electrical Schematic BILL OF MATERIAL: 71MC9502

01

Page 158

ID0765502

Notes:

Page 159

Disconnect Panel Schematic BILL OF MATERIAL: 7070-0021

DISCONNECT PANEL SCHEMATIC BILL OF MATERIAL: 7070-0021

01

Page 160

ID0766743

Disconnect Panel Schematic BILL OF MATERIAL: 7070-0021

01

Page 161

ID0766743

Notes:

Page 162

Appendix Table of Contents Tightening Guidelines .............................. 164 SAE Bolt Torque ........................................ 165 Metric Bolt Torque ..................................... 166

01

Prevailing Torque Locknut Torque ........ 167 Lug Nut Torque .......................................... 169 Assembly Methods ................................... 170

Page 163

ID0766743

Tightening Guidelines Values given on the following pages are a guide. Do not use these values if a different torque value or tightening procedure is given for a specific application. Check tightness of fasteners periodically.

Shear bolts are designed to fail under predetermined loads. Always replace shear bolts with identical property class fasteners.

Fasteners should be replaced with the same or higher property class. If higher property class fasteners are used, tighten only to torque value of original fastener.

Make sure fastener threads are clean and that the threads are properly started. This will prevent them from cross threading or galling when tightened.

Lubed means cleaned, dry bolts lubricated with a standard, medium-viscosity machine oil. Lubricate all contact areas of the bolts and washers. Lubricating the bolts is the suggested torque method.

01

Page 164

ID0688485

SAE Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in SAE J429 and ASME 574.

Diameter and Thread Pitch

SAE Grade 5

SAE Grade 8

Socket Head Cap Screw

Dry 101 in•lb

Lubed 76 in•lb

Dry 143 in•lb

Lubed 107 in•lb

Dry 168 in•lb

Lubed 120 in•lb

11.4 N•m 116 in•lb

8.6 N•m 87 in•lb

16.2 N•m 147 in•lb

12.1 N•m 123 in•lb

19 N•m 192 in•lb

13.6 N•m 144 in•lb

13.1 N•m 209 in•lb

9.8 N•m 157 in•lb

16.6 N•m 295 in•lb

13.9 N•m 221 in•lb

21.7 N•m 348 in•lb

16.3 N•m 264 in•lb

23.6 N•m 231 in•lb

17.7 N•m 171 in•lb

33.3 N•m 327 in•lb

25 N•m 245 in•lb

39.3 N•m 384 in•lb

29.8 N•m 288 in•lb

26.1 N•m 372 in•lb

19.7 N•m 276 in•lb

36.9 N•m 44 ft•lb

27.7 N•m 33 ft•lb

43.4 N•m 51 ft•lb

32.5 N•m 38 ft•lb

42 N•m 420 in•lb

31.2 N•m 312 in•lb

59.7 N•m 49 ft•lb

44.7 N•m 37 ft•lb

69.1 N•m 58 ft•lb

51.5 N•m 43 ft•lb

47.5 N•m 49 ft•lb

35.3 N•m 37 ft•lb

66.4 N•m 70 ft•lb

50.2 N•m 52 ft•lb

78.6 N•m 81 ft•lb

58.3 N•m 61 ft•lb

66.4 N•m 55 ft•lb

50.2 N•m 41 ft•lb

94.9 N•m 78 ft•lb

70.5 N•m 58 ft•lb

109.8 N•m 91 ft•lb

82.7 N•m 68 ft•lb.

74.6 N•m 75 ft•lb

55.6 N•m 57 ft•lb

105.8 N•m 106 ft•lb

78.6 N•m 80 ft•lb

123.4 N•m 124 ft•lb

92.2 N•m 93 ft•lb

101.7 N•m 85 ft•lb

77.3 N•m 64 ft•lb

143.7 N•m 120 ft•lb

108.5 N•m 90 ft•lb

168.1 N•m 140 ft•lb

126.1 N•m 105 ft•lb

115.2 N•m 150 ft•lb

86.8 N•m 113 ft•lb

162.7 N•m 212 ft•lb

122 N•m 159 ft•lb

189.8 N•m 238 ft•lb

142.4 N•m 179 ft•lb

203.4 N•m 170 ft•lb

153.2 N•m 127 ft•lb

287.4 N•m 240 ft•lb

215.6 N•m 180 ft•lb

322.7 N•m 270 ft•lb

244.7 N•m 202 ft•lb

230.5 N•m 267 ft•lb

172.2 N•m 200 ft•lb

325.4 N•m 376 ft•lb

224 N•m 282 ft•lb

366.1 N•m 423 ft•lb

273.9 N•m 317 ft•lb

362 N•m 297 ft•lb

271.2 N•m 223 ft•lb

509.8 N•m 420 ft•lb

382.3 N•m 315 ft•lb

573.5 N•m 472 ft•lb

429.8 N•m 354 ft•lb

402.7 N•m 429 ft•lb

302.3 N•m 322 ft•lb

569.4 N•m 606 ft•lb

427.1 N•m 455 ft•lb

640 N•m 682 ft•lb

480 N•m 511 ft•lb

581.6 N•m 474 ft•lb

436.6 N•m 355 ft•lb

821.6 N•m 669ft•lb

616.9 N•m 502 ft•lb

924.7 N•m 752 ft•lb

692.8 N•m 564 ft•lb

642.7 N•m 644 ft•lb

481.3 N•m 483 ft•lb

907 N•m 909 ft•lb

680.6 N•m 681 ft•lb

1019.6 N•m 1022 ft•lb

791.8 N•m 767 ft•lb

873.1 N•m 722 ft•lb

654.9 N•m 542 ft•lb

1232.4 N•m 1020 ft•lb

923.3 N•m 765 ft•lb

1385.6 N•m 1147 ft•lb

1039.9 N•m 860 ft•lb

978.9 N•m

734.9 N•m

1382.9 N•m

1037.2 N•m

1551.1 N•m

1166 N•m

1/4–20 1/4–28 5/16–18 5/16–24 3/8–16 3/8–24 7/16–14 7/16–20 1/2–13 1/2–20 5/8–11 5/8–18 3/4–10 3/4–16 7/8–9 7/8–14 1–8 1–12

01

Page 165

ID0688411

Metric Bolt Torque Torque estimates based on clamp load (75% of proof strength) as specified in ISO 898– 1.

Class 8.8

Class 10.9

12.9 Socket Head Cap Screw 12.9

Size and Thread Pitch

Dry 54 in•lb

Lubed 41 in•lb

Dry 78 in•lb

Lubed 59 in•lb

Dry 91 in•lb

Lubed 68 in•lb

6.1 N•m 92 in•lb

4.6 N•m 69 in•lb

8.8 N•m 133 in•lb

6.7 N•m 99 in•lb

10.3 N•m 156 in•lb

7.7 N•m 116 in•lb

10.4 N•m 156 in•lb

7.8 N•m 116 in•lb

15 N•m 222 in•lb

11.2 N•m 167 in•lb

17.6 N•m 260 in•lb

13.1 N•m 195 in•lb

17.6 N•m 225 in•lb

13.1 N•m 169 in•lb

25.1 N•m 333 in•lb

18.9 N•m 242 in•lb

29.4 N•m 377 in•lb

22 N•m 284 in•lb

25.4 N•m 37 ft•lb

19.1 N•m 28 ft•lb

37.6 N•m 53 ft•lb

31.3 N•m 40 ft•lb

42.6 N•m 62 ft•lb

32.1 N•m 47 ft•lb

50.2 N•m 65 ft•lb

38 N•m 49 ft•lb

71.9 N•m 93 ft•lb

54.2 N•m 69 ft•lb

84.1 N•m 108 ft•lb

63.7 N•m 81 ft•lb

88.1 N•m 104 ft•lb

66.4 N•m 78 ft•lb

126.1 N•m 148 ft•lb

93.6 N•m 111 ft•lb

146.4 N•m 173 ft•lb

109.8 N•m 130 ft•lb

141 N•m 161 ft•lb

105.8 N•m 121 ft•lb

200.7 N•m 230 ft•lb

150.5 N•m 172 ft•lb

234.6 N•m 269 ft•lb

176.3 N•m 202 ft•lb

218.3 N•m 222 ft•lb

164.1 N•m 167 ft•lb

311.8 N•m 318 ft•lb

233.2 N•m 238 ft•lb

364.7 N•m 372 ft•lb

273.9 N•m 279 ft•lb

301 N•m 314 ft•lb

226.4 N•m 235 ft•lb

431.2 N•m 449 ft•lb

322.7 N•m 337 ft•lb

504.4 N•m 525 ft•lb

378.3 N•m 394 ft•lb

425.7 N•m 428 ft•lb

318.6 N•m 321 ft•lb

608.8 N•m 613 ft•lb

456.9 N•m 460 ft•lb

711.8 N•m 716 ft•lb

534.2 N•m 537 ft•lb

580.3 N•m 543 ft•lb

435.2 N•m 407 ft•lb

831.1 N•m 776 ft•lb

623.7 N•m 582 ft•lb

970.8 N•m 908 ft•lb

728.1 N•m 681 ft•lb

736.2 N•m 796 ft•lb

551.8 N•m 597 ft•lb

1052.1 N•m 1139 ft•lb

789.1 N•m 854 ft•lb

1231.1 N•m 1331 ft•lb

923.3 N•m 998 ft•lb

1079.2 N•m 1079 ft•lb

809.4 N•m 809 ft•lb

1544.3 N•m 1543 ft•lb

1157.9 N•m 1158 ft•lb

1804.6 N•m 1804 ft•lb

1353.1 N•m 1353 ft•lb

1462.9 N•m 1468 ft•lb

1096.9 N•m 1101 ft•lb

2092 N•m 2101 ft•lb

1570 N•m 1576 ft•lb

2445.9 N•m 2455 ft•lb

1834.4 N•m 1842 ft•lb

1990.3 N•m 1886 ft•lb

1492.8 N•m 1415 ft•lb

2848.6 N•m 2699 ft•lb

2136.8 N•m 2024 ft•lb

3328.5 N•m 3154 ft•lb

2497.4 N•m 2366 ft•lb

2557.1 N•m

1918.5 N•m

3659.4 N•m

2744.2 N•m

4276.3 N•m

3207.9 N•m

M5 X 0.80 M6 X 1.00 M7 X 1.00 M8 X 1.25 M10 X 1.50 M12 X 1.75 M14 X 2.00 M16 X 2.00 M18 X 2.50 M20 X 2.50 M22 X 2.50 M24 X 3.00 M27 X 3.00 M30 X 3.50 M33 X 3.50 M36 X 4.00

01

Page 166

ID0688543

Prevailing Torque Locknut Torque Torque relationships for electrodeposited zinc and lubricated all-metal prevailing torque locknuts.

Torque minimum and mximum estimates based on clamp load (75% of proof strength) for appropriate grade of bolt.

Locknut

Grade C Hex

Grade F Hex Flange

Metric

US

Metric

Metric

US

Metric

7–10 ft•lb

9–13 N•m

8–12 ft•lb

11–16 N•m

6–8 ft•lb

8–11 N•m

9–11 ft•lb

12–15 N•m

1/4–28

8–11 ft•lb

11–15 N•m

9–12 ft•lb

12–16 N•m

7–9 ft•lb

9–12 N•m

10–13 ft•lb 13–17 N•m

5/16–18

13–18 ft•lb 17–24 N•m 16–21 ft•lb 21–28 N•m 13–17 ft•lb 17–23 N•m 18–23 ft•lb 24–43 N•m

5/16–24

14–19 ft•lb 19–25 N•m 18–23 ft•lb 24–31 N•m 14–18 ft•lb 19–24 N•m 20–26 ft•lb 27–35 N•m

3/8–16

16–20 ft•lb 21–27 N•m 28–37 ft•lb 38–50 N•m 23–29 ft•lb 31–39 N•m 33–41 ft•lb 44–50 N•m

3/8–24

16–22 ft•lb 21–30 N•m 32–42 ft•lb 43–57 N•m 26–33 ft•lb 35–44 N•m 37–47 ft•lb 50–63 N•m

7/16–14

23–32 ft•lb 31–43 N•m 45–59 ft•lb 61–80 N•m 37–47 ft•lb 50–63 N•m 52–66 ft•lb 70–89 N•m

7/16–20 1/2–13 1/2–20 9/16–12 9/16–18 5/8–11 5/8–18

US

Grade G Hex Flange

US 1/4–20

115–146 ft•lb

78–100 N•m 108–137 N•m 122–154 N•m 156–198 N•m

24–34 ft•lb 32–46 N•m 51–66 ft•lb 69–89 N•m 41–52 ft•lb 55–70 N•m 58–74 ft•lb

100–130 ft•lb

93–122 N•m 105–138 N•m 135–176 N•m

37–50 ft•lb 50–67 N•m 69–90 ft•lb 38–53 ft•lb 51–72 N•m 78–102 ft•lb 50–70 ft•lb 67–95 N•m

57–72 ft•lb 77–97 N•m 80–101 ft•lb 64–81 ft•lb 82–103 ft•lb

87–110 N•m 111–139 N•m

90–114 ft•lb

58–78 ft•lb

78–105 N•m

111–146 ft•lb

150–198 N•m

91–115 ft•lb

123–156 N•m

128–163 ft•lb

173–221 N•m

70–95 ft•lb

95–129 N•m

138–180 ft•lb

187–224 N•m

113–143 ft•lb

153–194 N•m

159–201 ft•lb

215–272 N•m

156–204 ft•lb 245–320 ft•lb

211–276 N•m 332–434 N•m

127–161 ft•lb 200–253 ft•lb

172–218 N•m 271–343 N•m

180–228 ft•lb 282–357 ft•lb

224–309 N•m 382–484 N•m

223–282 ft•lb

302–282 N•m

315–399 ft•lb

427–541 N•m

3/4–10

125–165 ft•lb

99–133 N•m 169–223 N•m

3/4–16

120–165 ft•lb

162–223 N•m

273–357 ft•lb

370–484 N•m

7/8–9

185–250 ft•lb

251–339 N•m

394–515 ft•lb

534–698 N•m

7/8–14

200–270 ft•lb 275–375 ft•lb

271–366 N•m 375–508 N•m

435–568 ft•lb 591–772 ft•lb

589–770 N•m 801–1046 N•m

Grades B and F: SAE J429

1–12

290–395 ft•lb

393–535 N•m

663–867 ft•lb

899–1175 N•m

Grade 5 bolts

1 1/8–7

294–404 ft•lb

398–547 N•m

837–1095 ft•lb

1135–1484 N•m

Grades C and G: SAE J429

1 1/8–12

412–549 ft•lb 375–513 ft•lb

558–744 N•m 508–695 N•m

412–549 ft•lb

558–744 N•m

939–1227 1273–1663 ft•lb N•m 1181–1545 1601–2094 ft•lb N•m 1308–1710 1773–2318 ft•lb N•m

1–8

1 1/4–7 1 1/4–12

01

Grade B Hex

73–98 ft•lb

Page 167

Grade 8 bolts

ID0688544

Torque Values for Other Types of Fasteners Find the torque for the same size and grade/class of hex nut and multiply that value by the conversion factor listed below to determine recommended torque values for other types of fasteners.

01

Type

Factor

Example

hex top deformed locknuts

.75

3/8”, grade 5: 31 ft•lb .75 = 23.25 ft•lb

smooth flange nuts and bolts

1.5

M10, class 8.8: 52 N•m X 1.5 = 78 N•m

serrated flange nuts and bolts

2.0

1/2”, grade 8: 145 N•m X 2.0 = 290 N•m

Page 168

ID0688544

Lug Nut Torque Size

Type

Torque(ft•lb)

Torque (N•m)

7/16–NF

cone

75–85

102–115

1/2–NF

cone

90–100

120–135

5/8–NF

flange

275–325

373–440

Do not use these values if a different torque value or tightening procedure is given for specific application.

Torque values listed are for general use only. Check tightness of fasteners periodically.

Torque values are for non-lubricated threads.

01

Page 169

ID0688545

Assembly Methods JIC 37° and SAE 45° Flare* Dash Size

Flats from Wrench Resistence (FFWR)

Swivel Nut Torque Newton Meters (Ref)

Pound-Feet (Ref)

-4

2

18

13

-5

2

23

17

-6

1-1/2

30

22

-8

1-1/2

57

42

-10

1-1/2

81

60

-12

1-1/4

114

84

-16

1

160

118

-20

1

228

168

-24

1

265

195

-32

1

360

265

*without lubrication Seal-Lok® Swivel Nut Torque

O-Ring Boss End Fitting or Lock Nut

Dash Size

Newton Meters (+10%/-0)

Pound Feet (+10%/-0)

Flats from Wrench Resistence (FFWR)

-4

25

18

1/2 - 3/4

-6

40

30

-8

55

40

Thread Size

Newton Meters

PoundInches

1/2 - 3/4

9/16-18

48 to 54

432 to 480

1/2 - 3/4

3/4-16

70 to 78

612 to 684 Pound-Feet

01

-10

80

60

1/2 - 3/4

7/8-14

102 to 114

75 to 84

-12

115

85

1/3 - 1/2

1-1/16-12

142 to 160

105 to 117

-16

150

110

1/3 - 1/2

1-5/16-12

237 to 254

175 to 187

-20

205

150

1/3 - 1/2

-24

315

230

1/3 - 1/2

-32

-

-

-

Page 170

ID0688546

Code 61 Flange Recommended Bolt Torque Dash Size

Flange Size

Inch Bolt (J518)

+10% -0 Torque ft. lbs.

Metric Bolt (ISO 6162)

+10% -0 Torque N-m

8

1/2

5/16-18

17

M8

24

12

3/4

3/8-16

31

M10

50

16

1

3/8-16

31

M10

50

20

1-1/4

7/16-14

52

M10

50

24

1-1/2

1/2-13

77

M12

92

32

2

1/2-13

77

M12*

92

40

2-1/2

1/2-13

77

M12

92

48

3

5/8-11

155

M16

210

56

3-1/2

5/8-11

155

M16

210

64

4

5/8-11

155

M16

210

80

5

5/8-11

155

M16

210

*Does not meet ISO 6162 specification.

Code 62 Flange Recommended Bolt Torque Dash Size

Flange Size

Inch Bolt (J518)

+10% -0 Torque ft. lbs.

Metric Bolt (ISO 6162)

+10% -0 Torque N-m

8

1/2

5/16-18

17

M8

24

12

3/4

3/8-16

31

M10

50

16

1

7/16-14

52

M12

92

20

1-1/4

1/2-13

77

M14*

130

24

1-1/2

5/8–11

155

M16

210

32

2

3/4–10

265

M20

400

*Does not meet ISO 6162 specification.

01

Page 171

ID0688546

SAE Straight Thread Port Assembly (SAE J1926) Assembly Torque (+10%-0) Non-Adjustable Triple-Lok Ferulok Pipe Fittings

Seal-Lok ft.lbs

ft.lbs

SAE Dash Size

Thread Size UN/ UNF

(in.lbs)

N-m

(in.lbs)

N-m

2

5/16–24

-

-

(85)

10

3

3/8–24

-

-

(155)

18

4

7/16–20

(310)

35

(260)

29

5

1/2–20

(360)

40

(280)

32

6

9/16–18

(420)

46

(350)

40

8

3/4–16

60

80

(620)

70

10

7/8–14

100

135

85

115

12

1 1/16–12

135

185

135

185

14

1 3/16–12

175

235

175

235

16

1 5/16–12

200

270

200

270

20

1 5/8–12

250

340

250

340

24

1 7/8–12

305

415

305

415

32

2 1/2–12

375

510

375

510

NOTE: Lubricate threads before assembly. Values in chart are for steel fittings in steel ports. For stainless steel fittings, please use the upper limit of torque range. For brass, aluminum (and other soft metal), decrease torque value by 35%.

01

Page 172

ID0688546

SAE Straight Thread Port Assembly (SAE J1926) Assembly Torque (+10%-0) Adjustable Triple-Lok Ferulok

Seal-Lok ft.lbs

ft.lbs

SAE Dash Size

Thread Size UN/ UNF

(in.lbs)

N-m

(in.lbs)

N-m

2

5/16–24

-

-

(60)

7

3

3/8–24

-

-

(100)

11

4

7/16–20

(180)

20

(180)

20

5

1/2–20

(360)

40

(250)

28

6

9/16–18

(420)

46

(350)

40

8

3/4–16

60

80

(620)

70

10

7/8–14

100

135

85

115

12

1 1/16–12

135

185

135

185

14

1 3/16–12

175

235

175

235

16

1 5/16–12

200

270

200

270

20

1 5/8–12

250

340

250

340

24

1 7/8–12

305

415

305

415

32

2 1/2–12

375

510

375

510

NOTE: Lubricate threads before assembly. Values in chart are for steel fittings in steel ports. For stainless steel fittings, please use the upper limit of torque range. For brass, aluminum (and other soft metal), decrease torque value by 35%.

01

Page 173

ID0688546

SAE Straight Thread Port Assembly (SAE J1926) Assembly Torque (+10%-0) Plugs Hollow Hex

Hex Head

HP5ON-S

P5ON-S

ft.lbs

ft.lbs

SAE Dash Size

Thread Size UN/ UNF

(in.lbs)

N-m

(in.lbs)

N-m

2

5/16–24

(30)

3.5

(85)

10

3

3/8–24

(55)

6

(155)

18

4

7/16–20

(120)

13.5

(260)

29

5

1/2–20

(170)

19

(280)

32

6

9/16–18

(410)

46

(350)

40

8

3/4–16

60

80

(620)

70

10

7/8–14

100

135

85

115

12

1 1/16–12

135

185

135

185

14

1 3/16–12

175

235

175

235

16

1 5/16–12

200

270

200

270

20

1 5/8–12

250

340

250

340

24

1 7/8–12

305

415

305

415

32

2 1/2–12

375

510

375

510

NOTE: Lubricate threads before assembly. Values in chart are for steel fittings in steel ports. For stainless steel fittings, please use the upper limit of torque range. For brass, aluminum (and other soft metal), decrease torque value by 35%.

01

Page 174

ID0688546

Pipe Fittings Nom. SAE Dash Size

Fractional Size

Threads per Inch

Turns from Finger Tight

2

1/8 inch

27

2–3

4

1/4 inch

18

2–3

6

3/8 inch

18

2–3

8

1/2 inch

14

2–3

12

3/4 inch

14

2–3

16

1 inch

11–1/2

1.5 – 2.5

20

1–1/4 inch

11–1/2

1.5 – 2.5

24

1–1/2 inch

11–1/2

1.5 – 2.5

32

2 inch

11–1/2

1.5 – 2.5

NOTE: Apply sealant/lubricant to male pipe threads. The first two threads should be left uncovered to avoid system contamination. Screw pipe fitting into female pipe port to the finger tight position. Wrench tighten fitting to the appropriate turns from finger tight (TFFT) shown in table above, making sure the tube end of an elbow or tee fitting is aligned to receive incoming tube or hose fitting.

01

Page 175

ID0688546

Notes:

Page 176

Notes:

American Augers 135 US Route 42 West Salem, Ohio 44287 www.americanaugers.com TEL: 419-869-7107 • 800-324-4930 (USA) FAX: 491-869-7425

Always include machine serial number when ordering parts.

Due to our continuing product improvement, machine specifications are subject to change without notice.

Released June 2023

Revision 00

7053-0102