ElectricalSystem–5000

Error codes

13.5Errorcodes

•Press and hold S18 while turning S17 to “ON” position.

•Press and hold S18 until E = error codes is displayed.

•When E is selected, the “E” symbol will light up as an indication of what is shown in the display.

•The 50 most recent error codes are stored. The latest error is displayed first. The display shows the error code first, followed by the time when the error occurred.

•The error codes are divided into two groups, C = caution and E = error.

•C codes are not stored. They are only cautions and remain lit in the display as long as the fault remains.

•If there is only one error registered in the memory, the other empty entry lines appear as follows: Error: E - - - and time: - - - - .

CodeC3

Description TLS: Shock sensors registered values outside the limits

Possible error cause

A shock sensor has reported values that exceed the truck’s tolerance values. Driving may be too hard

Check that the shock sensor’s limit values are correctly set.

Check that the shock sensor is correctly positioned./The brake engages and stops the truck. The TLS reset command activates the truck

CodeC4

Description TLS: Use of the truck has been blocked

Possible error cause Truck use can be “blocked” by a TLS command. / The truck cannot be used until a new TLS command cancels the blocking of the truck