1 minute read
ElectricalSystem–5000 Parameters
from Toyota Forklift 7SLL12.5 7SLL16 7SLL20 7SLL13.5S 7SLL12.5F 7SLL16F 7SLL20F Service Manual SN 985777
Odd values specify open driver parameters, even values specify that driver parameters must be opened using the CAN key
13.6.4Parameterdescription
Parameter10
NOTE!
The functionality of parameter #10 is set aside if the value of parameter #39 is set to 5,6,7 or 8. The PIN codes are managed using the socalled expanded keypad. See section Expanded keypad - General on page 47 for more detailed information.
Ten drivers can have their own PIN code to gain access to the truck. Each driver can set all driver parameters individually.
On delivery the PIN code is set to 1 and this only applies for driver no. 1. Code 0 is not accepted as a solitary code.
When you wish to start the truck enter your code and press the green button numbered 1.
When you want to switch off the truck, press the red button numbered 0. When the CAN key is connected, you can start the truck by simply pressing the green button numbered 1. Switch off by pressing the red button numbered 0.
