Electrical System – 5000

Table 4: Option 3 – Choice of movement

Table 4: Option 3 – Choice of movement

Parameter 20

You decide yourself what the hour meter will show.

1A = Key time

2b = Movement time

3c = Drive motor time

4d =Pump motor time

5s = Time for service

Parameter 21

You must specify the type of battery the truck is equipped with.

In order to set the meter for the battery’s level of discharge, the following should be taken into account:

•Acid concentration when the battery is fully charged, to check the grade of the battery. Must be between 1.27-1.29.

•When the lifting capacity is disconnected (the battery is 80 % discharged), the value must be close to, but not below, 1.14.

The acid concentration can vary depending on the battery make.