Electric drive motor – 1760

Technical data

Order numberDateValid from serial numberT-code 222995-0402005-10-28723984-677, 678, 679

Residual detergent should be removed with an appropriate solvent, if it leaves a greasy surface.

If the parts of the motor are heavily fouled it may be necessary to use a solvent that is sprayed onto the parts. It is important that the detergent is applied in a way to prevent dirt from penetrating into the parts of the motor, especially for the rotor.

One method of cleaning the rotor is to dip it in solvent. If this is done then the rotor must always be dried with the application of heat. There must be adequate ventilation during the drying process, and the drying should continue until a number of measurements of the insulation resistance provide equivalent and approved results.

9.3 Technical data

Type of machine7PM187PM20,

TypeTSL140S-DS20TSL140S-DS30TSL140B-DS40