Electrical systems – 5000

Parameters

Changing non-configurable options

•Ensure the truck is in parameter mode.

The parameter symbol is lit.

•Select parameter #15 using [L1].

The first set-up of sub-parameters is displayed

The next set-up of sub-parameters is displayed if you continue to activate the speed control L1. Ensure that only the relevant sub-parameters are displayed.

The value of the sub-parameters is displayed after 1 second.

•Press the horn button S18.

The parameter symbol flashes. .

•Enter the sub-parameter value by repeatedly operating the speed control L1 in either direction. See Table 1: for more information.

•Press the S18 horn button once to confirm the new setting.

The parameter symbol is lit (i.e. stops flashing).

•Switch off the truck by pressing on the keypad. The non-configurable option is now activated.

•Check that the function works correctly before the truck is put back in operation.