Hydraulic, pneumatic – 6000 Adjustments

14.2 Adjustments

14.2.1 Adjustment of the pressure limit valve

The pressure limit valve is set to the correct value at the factory, but may need to be adjusted if the valve or complete hydraulic unit is replaced.

The truck should be able to lift a load of between 2250-2300 kg.

Pos. Description Notes

1 Cover nut

2 Adjuster screw, pressure limit Adjustment clockwise results in increased pressure Adjustment anticlockwise results in reduced pressure

•Unscrew the cover nut (1) with a spanner, 13 mm.

•Place a load, 2200 kg, on the forks and check that the machine lifts this.

•If the machine can lift 2200 kg, place a further 100 kg on the forks. Check whether machine can lift the load.

•If the machine can lift 2300 kg, adjust the pressure limit valve by screwing the adjuster screw (2) anticlockwise using a 4 mm allen key until the machine cannot lift the load.

Hydraulic, pneumatic – 6000

Cleaning the filter

14.3 Cleaning the filter

2 1 3 4 5

•Dismantle the hydraulic unit from the machine.

•Empty the oil from the tank.

•Loosen and remove the hose clip (1).

•Loosen and remove the two tank holders (2).

•Loosen the suction filter (5) and the return filter (3).

•Clean the filter in an environment friendly cleaning agent.

Assemble in the reverse order.