Tigercat S610C CARRIER VEHICLE MOVING AND TRANSPORTING INSTRUCTIONS MANUAL

Tigercat ENG

®

S610C CARRIER VEHICLE MOVING AND TRANSPORTING INSTRUCTIONS

36231AMUL R2 08/15

Tigercat®

2

Tigercat® INDEX ENGLISH MACHINE WEIGHT ............................................................................ 17 TRANSPORTING INSTRUCTIONS ................................................... 16 VEHICLE MOVING INSTRUCTIONS JOYSTICK STEERING ................................................................... 10 STEERING WHEEL .......................................................................... 5

3

Tigercat®

4

Tigercat®

ENGLISH VEHICLE MOVING INSTRUCTIONS ONLY FOR S610C CARRIER MACHINES EQUIPPED WITH A STEERING WHEEL For machines equipped with joystick steering, see page 10.

IMPORTANT: Read and understand these safety instructions before loading or off loading this machine. See operator’s manual in the storage box in the cab for additional information.

1. Turn battery disconnect switch ON . This switch is located behind the access panel on the left side of engine compartment.

2. Ensure area is clear before moving machine and that any personnel are at a safe distance.

E625C-116

3. Remove securing pins and red articulation lock bar from between frames.

BATTERY DISCONNECT SWITCH LEFT SIDE ENGINE COMPARTMENT

RETAINING BOLT

4. Sit in operator’s seat, fasten seat belt and close both doors.

ARTICULATION LOCK

5. Place both seat armrests in down, operating position.

F610C-02

5

Tigercat® 6. Check that outside personnel have not moved into a hazardous location near the machine, before starting the engine.

7. Press horn button several times to alert personnel in the area of your intent to start engine. The horn button is located in the center of the steering wheel.

8. Turn key switch to RUN position and observe computer display.

9. Wait for WAIT TO START warning on computer display to turn off.

10. Ensure that the parking brake is on. The parking brake icon on the computer display will be illuminated (red) when the parking brake is engaged.

P

CONTROL PANEL

P

11. Turn key switch to START position , release when engine fires.

6

Tigercat® 12. Disengage the parking brake

P

P .

Warning: All controls are now operational.

CONTROL PANEL

13. Use dozer control lever to raise

dozer blade.

AD610C-01

DOZER BLADE CONTROL LEVER

14. Move machine by pressing travel foot pedals on the right.

Right pedal is FORWARD Left pedal is REVERSE

. .

34356AUNI R0

7

Tigercat® 15. Steer machine by slowly turning the steering wheel in the direction desired.

16. Once the machine is in the desired location stop machine.

17. Use dozer control lever to lower

dozer blade.

AD610C-01

DOZER BLADE CONTROL LEVER

8

Tigercat® 18. Engage parking brake P .

P

CONTROL PANEL

19. Turn key switch to STOP position

to shut off engine.

20. If transportation of machine is to continue, reinstall red articulation lock bar between the front and rear frames.

RETAINING BOLT

F610C-02

ARTICULATION LOCK

21. Turn battery disconnect switch OFF .

625C-111

9

BATTERY DISCONNECT SWITCH LEFT SIDE ENGINE COMPARTMENT

Tigercat®

ENGLISH VEHICLE MOVING INSTRUCTIONS ONLY FOR S610C CARRIER MACHINES EQUIPPED WITH JOYSTICK STEERING For machines equipped with steering wheel, see page 5.

IMPORTANT: Read and understand these safety instructions before loading or off loading this machine. See operator’s manual in the storage box in the cab for additional information.

1. Turn battery disconnect switch ON . This switch is located behind the access panel on the left side of engine compartment.

2. Ensure area is clear before moving machine and that any personnel are at a safe distance.

E625C-116

BATTERY DISCONNECT SWITCH LEFT SIDE ENGINE COMPARTMENT

3. Remove securing pins and red articulation lock bar from between frames.

RETAINING BOLT

4. Sit in operator’s seat, fasten seat belt and close both doors.

ARTICULATION LOCK

5. Place both seat armrests in down, operating position. For safe operation of all controls the operator’s seat must be locked in either the forward facing or rear facing position.

F610C-02

10

Tigercat® 6. Check that outside personnel have not moved into a hazardous location near the machine, before starting the engine.

P

7. Press horn button several times to alert personnel in the area of your intent to start engine. The horn button is on the control panel.

CONTROL PANEL

8. Turn key switch to RUN position and observe computer display.

9. Wait for WAIT TO START warning on computer display to turn off.

10. Ensure that the parking brake is on. The parking brake icon on the computer display will be illuminated (red) when the parking brake is engaged.

P

CONTROL PANEL

P

11. Turn key switch to START position , release when engine fires.

11

Tigercat® 12. Disengage the parking brake P .

P

Warning: Joysticks are now operational.

CONTROL PANEL

13. Use dozer control lever to raise dozer blade (front).

AD610C-01

DOZER BLADE CONTROL LEVER

12

Tigercat® 14. Use the direction selection switch on the left hand joystick to select the direction of travel.

This switch selects the direction of travel for the travel/engine speed pedal in use (either forward facing or rear facing).

This is a three position switch.

(SEAT FACING FRONT OF MACHINE)

Place switch in the forward position to travel in a FORWARD* direction.

(SEAT FACING REAR OF MACHINE)

Place switch in the center position for neutral.

LEFT HAND JOYSTICK

Place switch in the rear position to travel in a REVERSE* direction. *NOTE: Control of machine travel is automatically transferred by the computer control system from the forward facing travel/engine speed pedal to the rear facing travel/engine speed pedal based on the position of the operator’s seat. Therefore FORWARD and REVERSE as described above are considered to be forward and reverse as viewed by the operator either from the forward facing seat position or the rear facing seat position.

E625C-23

FORWARD FACING FOOT PEDALS (SEAT FACING FRONT OF MACHINE)

15. Move machine by pressing travel foot pedal .

E625C-22

REAR FACING FOOT PEDALS (SEAT FACING REAR OF MACHINE) 13

Tigercat® 16. Steer machine by slowly moving the left hand steering joystick in the direction desired.

17. Once the machine is in the desired location stop machine.

(SEAT FACING FRONT OF MACHINE)

(SEAT FACING REAR OF MACHINE)

LEFT HAND JOYSTICK

18. Use dozer control lever to lower dozer blade (front).

AD610C-01

DOZER BLADE CONTROL LEVER

14

Tigercat® 19. Engage parking brake P .

P

CONTROL PANEL

20. Turn key switch to STOP position to shut off engine.

21. If transportation of machine is to continue, reinstall red articulation lock bar between the front and rear frames.

RETAINING BOLT

F610C-02

ARTICULATION LOCK

22. Turn battery disconnect switch OFF .

625C-111

15

BATTERY DISCONNECT SWITCH LEFT SIDE ENGINE COMPARTMENT

Tigercat® TRANSPORTING INSTRUCTIONS

The machine may be transported with the wheels on or off.

With wheels on:•

DO NOT remove air from tires, this will result in damage to the tires!

With wheels off:•

•

The articulation lock bar must be installed.

•

Additional chains may be installed on the two tow lugs (front of unit) and on the bottom cab access steps.

Do not secure the machine to the truck ANYWHERE near the center joint area as this can seriously damage the center joint.

With the wheels on or off:The dozer blade must be down on the truck bed.

The machine must be cross chained (side to side) at both the front and rear axle area.

IMPORTANT !

When transporting the machine, chains must be used to prevent forward, reverse and side to side movement of the machine.

If the wheels are removed the machine must be blocked so that the center joint is one inch or more above the truck bed.

•

•

Use only transport regulation chains for this purpose, example; 5/16” grade 7 with a tensile strength of 43500kg(96,000lb)/chain. Using inferior or damaged chains could cause the load to shift.

RETAINING BOLT

ARTICULATION LOCK F610C-02

16

Tigercat® MACHINE WEIGHT The following are standard machine weights for Tigercat Carrier models: S610C 12700 kg (28000 lbs)

E

A

B

H

A B C D

G F

I

E C

D

H,I

E

F,G

F G H I

B,C

A,D

E 47588BUNI R0

17

Tigercat®

18

Tigercat®

19

Tigercat®

20