NEF 45 TIER 4B Tigercat ‒ Technical repair manual INTRODUCTION
5
SYMBOLS - WARNINGS
INTRODUCTION This document provides data, specifications, instructions and methods to perform repair interventions on the assembly and its components. Anyhow, this document is addressed to qualified and specialised personnel. Before performing any intervention, check that the document relating to the vehicle model on which the intervention is being performed is available and also make sure that all accident prevention devices, including but not limited to, goggles, helmet, gloves, shoes, as well as work equipment, lifting and transport equipment, etc., are available and efficient, and also make sure that the unit is in safety conditions for intervention. Carrying out interventions which fully comply with the indications given here, as well as the use of the specific equipment indicated, ensures repair interventions are carried out correctly, timings are respected and the operator's safety is safeguarded. Each repair intervention must be finalised to the recovery of functionality, efficiency and safety conditions that are provided by FPT. Each intervention on the unit aimed at a modification, alteration or other which has not been authorised by FPT relieves FPT of any liability, and, in particular, where the assembly is covered by a warranty, each intervention will immediately invalidate the warranty. FPT declines any liability for repair work. FPT is available to provide any information necessary for the execution of the interventions and to provide instructions for any cases and situations not covered in this publication. The data contained in this issue may not be up-to-date due to possible modifications made by the Manufacturer for technical or commercial reasons, or to adaptations required by laws in force in different countries. In the event of discordance between the information in this publication and the actual assembly, please contact the FPT network before performing any interventions. The complete or partial reproduction of the text or illustrations herein is forbidden. Manuals for repairs are split into Sections, each one of which is marked by a numeral; the contents of these sections are indicated in the general table of contents. Sections with mechanical contents include technical data, tightening torque collections, tool lists, overhauls at the bench, diagnostics and scheduled maintenance In the electrical/electronic system section there are the descriptions of the electric network and the electronic systems of the assembly, wiring diagrams, electrical characteristics of components and the component codes. The appendix provides a list of the general safety regulations which all operators, whether installers or maintenance technicians, must comply with to prevent any serious injury. The manual uses proper symbols in its descriptions; the purpose of these symbols is to classify information. In particular, a set of symbols has been defined to classify warnings, while another set has been specified for service operations.
SYMBOLS - WARNINGS Danger for persons Failure to comply with these prescriptions can result in the risk of serious injury. Risk of serious damage to the assembly The partial or total non-observance of these instructions could cause serious damage to the assembly and may nullify the warranty. General danger Includes the dangers of both above described signals. Environmental protection Indicates correct behaviour in order for the assembly use to be as environmentally friendly as possible. NOTE
– P2D32N030E0115
Indicates an additional explanation for a piece of information.
