Tigercat 718 Feller Buncher
Safety
GENERAL SAFETY PRECAUTIONS continued Avoid mounting or dismounting the machine in areas with slippery surfaces. If this is not possible clean up or cover slippery surfaces with a nonslip material.
Keep a first aid kit in an easily accessible location on the vehicle at all times. Safety Hazards - Viton Seals O-rings and other seals manufactured of Viton material produce a highly corrosive acid when subjected to temperatures above. 600°F (315°C). This contamination can have extreme consequences on human tissue since it is almost impossible to remove after contact. The following procedures are recommended when inspecting equipment that has been subjected to high temperatures such as fire:
Machines should be completely cleaned of debris at least daily, particularly around the engine exhaust components. Hydraulic oil leaks, excess grease, fuel and oil accumulation (including spillage) should be eliminated immediately. Maintain a clean cab interior, clear away trash or debris.
•
Visually inspect any seals or gaskets which have suffered from heat; they will appear black and sticky.
•
If these are found, Do Not Touch!!!
•
Determine the material composition of any seals or gaskets, If fluoro-elastomer seals (Viton, fluorel, or tecmoflon) have been used, the affected area must be decontaminated before undertaking further work. Natural rubber and nitrile materials are not hazardous.
•
Disposable heavy duty gloves (neoprene) must be worn and the affected area decontaminated by washing thoroughly with limewater (Calcium Hydroxide solution).
•
Any cloths, residue and gloves must be safely discarded after use.
Machine should be washed completely before and after every major service. Inspect the machine daily for signs of damage or unusual wear, to ROPS, FOPS, OPS structures. Check for fluid leaks, or faulty operation. Repair or replace malfunctioning parts and systems immediately. Check windows and door guards for damage. Check protective windows for cracks, a damaged window has reduced strength to stop flying objects. Check windows for scratching, crazing and cloudiness that could impair clear visibility all round the machine.
NOTE: Burning discarded items is not recommended except in an approved incineration process where the dangerous products are treated by alkaline scrubbing.
Do not operate the machine with any defective or inoperable components. Check all fluid levels. Do not operate the machine with any of the exhaust system, safety covers, or other devices removed.
1.4
