OPERATIONAL PERFORMANCE TEST / Engine

2. When measurement is started from cylinder No.1, perform the same measurement to all valves indicated with mark “●” in the following table after measuring cylinder No.1. (When measurement is started from

Cylinder

No.

When measurement is started from cylinder No.4 cylinder No.4, perform the same measurement to all valves indicated with mark “○” in the following table after measuring cylinder No.4.)

●●●●

3. After rotating the crank shaft 360 ?, align the TDC mark with the pointer. Then, continue measuring the other valves in the same manner.

Evaluation: Refer to the Performance Standard Table

Adjustment: Please perform the adjustment with a procedure similar to the measuring method, if it has not standard dimensions.

1. Loosen the adjusting screw lock nuts for the rocker arms. Insert the feeler gauge set of the standard size, and adjust the adjusting screws.