3. Disclaimer

[3]Cautions for equipment installation and removal

[4]Cautions for maintenance and storage

[5]Cautions concerning performance and functions

3.Disclaimer

We disclaims responsibility for any of the following items.

1.When working, always check that the power supply for devices has been cut off and that motors, engines, etc. are stopped. Also check that pressure inside the hydraulic pipes is "0". Operate the equipment levers a number of times (at least 10) to release any pressure remaining in the accumulator circuit. 2.Have such work as installation, removal, pipe work, wiring, etc. performed by personnel with the requisite specialized knowledge. (Personnel with the requisite specialized knowledge: About

Class 2 hydraulic pressure adjustment technician or persons who have received this division's service training) 3.Installation holes and installation surfaces must be clean. Otherwise, bolt tightening defects and seal damage might cause damage, oil leaks, etc. 4.When installing a product, always use the specified bolts and tighten to the specified torque.

Installation in violation of specifications can cause operation defects, damage, oil leaks, etc.

1.The customer must never alter the product. 2.Do not disassemble or reassemble the product without permission. Doing so can make it impossible to attain the specified performance and cause breakdowns and accidents. If disassembly and reassembly are unavoidable, have them performed by personnel with the requisite specialized knowledge. However, as stated in Item 5, we can only warrant the performance and functions of equipment that has passed factory performance and operation tests. 3.When transporting or storing this product, pay attention such environmental conditions as the ambient temperature and humidity, and protect the product from dust and rust. 4.When using this product after it has been stored for a prolonged period, it may be necessary to replace seals.

Since this product is crucial safety equipment, we can only warrant the performance and functions of equipment that has passed factory performance and operation tests. We request that this be understood if any assembly and disassembly is undertaken.

1.Fire or other force majeure, or accident or other external cause 2.Incorrect use, abuse ・ Use for other than the specified applications ・ Use contrary to the specification conditions ・ Performance of something prohibited ・ Performance of any item not specified in the operator's manual (operation, maintenance, inspection sequence) ・ Failure to perform an item specified in the operator's manual (operation, maintenance, inspection sequence) 3.Unsafe behavior 4.Performance and functions after disassembly and reassembly by the customer company or a third party