Removal and Installation of Common Rail

General Cautions When Performing Inspections

1.Cautions for inspections [1]Inspection after maintenance When working together, decide upon and use signals. 1)After the maintenance, run the engine at low idling (for approximately 5 minutes) and make sure that no oil or water leakage is detected from locations where maintenance work was done. 2)Operate each component slowly and make sure that they work properly. 3)Increase the engine speed and make sure there is no water and oil leakage. 4)Operate each component and make sure that there are no abnormalities. 5)Operate the monitor and other electric parts to check that they function properly.