Rex SP Vibratory Roller Parts Manual - PDF DOWNLOAD

BULLETIN 463 S.P. VIBRATORY ROLLER SERIAL NO. HX 151 & Up 9/72

REX CHAINBELT INC. CONSTRUCTION MACHINERY SECTION, MILWAUKEE, WISCONSIN 53201 MANUFACTURERS OF:

Truck Mixers Building Mixers Pumps Pumperete Airport and Road Forms Road Pavers Spreaders

Finishers Floats Spray Cure Machines Subgrade Planer and Tester

Conveyors Road Batch Plants Central Mix Plants Dry Batch Plants Automation Pulvi-Mixers Trav-L-Plants Pneumatic Compactors Steel Wheel Rollers Material Spreaders Concrete Breakers RP)' Partnr

INDEX BULLETIN 463 REX SELF-PROPELLED VIBRATORY ROLLER Eff. Ser. No. HX-157, Up

Description

Page No.

AIR CLEANER

4

ARTICULATING JOINT

41, 42, 43, 44

CONTROLS Controls Assembly — Morse Controls Assembly — Operators' Console Control Box. — Vibration Meter Controls — 2-Speed Shift Control Unit — Power Steering DAMAGE CLAIMS

35, 36 31, 32, 33 30 34 39, 40 P 1B

FRAME — ENGINE HOUSING, ROLL, TANKS

1, 2, 3

HYDRAULICS Hydraulic Piping — Traction Drive Hydraulic Piping — Vibrator Hydraulic Pump — Steering Hydraulic Pump — Traction Hydraulic Pump — Vibrator Hydraulic Motor — Traction Hydraulic Motor — Vibrator Hydraulic System — Steering

9, 10 19, 20 38 8 29 14 21, 22 37

INSTRUCTIONS FOR ORDERING PARTS

OPTIONAL EQUIPMENT Optional Cold Weather Start Optional Water System Optional Wheels, Tires Optional Wheel Scrapers Optional Wiper Mats Roll and Tires POWER UNIT TRACTION DRIVE Traction Drive Axle Traction Drive Hydrostatic Motor Traction Drive Hydrostatic Pump Traction Drive Transmission — 2-Speed Traction Drive Wheel Ends VIBRATOR Vibratory Roll (R.H.) Vibratory Roll (L.H.) Vibration Amplitude Indicator WATER PUMP — JABSCO WIRING Wire Sets — G.M. Wiring — Frequency Meter Wiring — Lights Wiring — Spray Bar

P1B 56 45, 46, 47, 48 1, 2, 3 51 49, 50 5, 6, 7 11, 12, 13 14 8 15, 16 17, 18 23, 24 25, 26 27, 28 52

55 53 54 55

.

-

is

,

Always Give Serial Number of Machine

Y 1B

INSTRUCTIONS FOR ORDERING PARTS Order repair parts from your Rex distributor. Specify quantity, part number and name of part. Do not order by reference number or state quantity wanted in terms of sets or pairs.

Always give serial number of machine. This is very important. The serial number is stamped on manufacturers' plate which is attached to the frame of machine.

Be particular to give complete shipping address mentioning town, county, and state.

Also give billing instructions and address. Tell whether to ship via parcel post, express, air express, or freight.

DAMAGE CLAIMS When broken goods are received, a full description of the damage should be made by the carrier agent on the freight bill. If this description is insisted on, full damage can always be collected from the transportation company.

We assume no responsibility for delay or damage to merchandise while in transit.

Our responsibility ceases upon delivery of shipment to the transportation company, from whom a receipt is received showing that shipment was in good condition and properly packed when delivered to them; therefore, claims for parts lost or broken in transit should be made BY YOU to the transportation company.

REX CHAINBELT INC. PRINTED IN U.S. k.

Specify Quantity, Part Number and Description When Ordering gliEX

4-

21 11

12 13 14

12 13 14

30 31

21

34, \ 35Ths

28

32

29

Previous to HX-157

33

Effective Ser. No. HX-157

MAIN FRAME — ENGINE HOUSING — ROLL ROLL FRAME & SCRAPER — TRACTION DRIVE WHEELS FUEL TANK — HYDRAULIC TANK REX SELF-PROPELLED VIBRATORY ROLLER

'W •S •11 NIGa./Weld

m

MAIN FRAME — ENGINE HOUSING — ROLL ROLL FRAME & SCRAPER — TRACTION DRIVE WHEELS FUEL TANK — HYDRAULIC TANK

w

Item No. 1

0

a,

2 3 4 5 6 7 8

as

9

cD

10 11 12 13 14 15 16 17 0:1

18

P art Nu mber

Description

Main Frame Cap Screw 1/4" x 8" 502-6031-80x Operator's Platform ..: Floorboard — Operator's Platform 502-4454-80 Channel Rubber — Floorboard X203699 102-8085-3>c Safety Walk Tape 4" x 18" Steering Lock 502-8081-80 Hair Pin — Steering Lock 298-131-47 Pin — Steering Lock 502-8082-80 Cut Washer 1" Cotter Pin 3/, 6 " x 2'/2 " .

502-4412-801 Hand Rail (L.H.) (As Illus.)

502-4412-81-v Hand Rail (R.H.) (Opposite) Steering Wheel 298-68-47 Cap — Steering Wheel 298-69-47 Nut — Steering Wheel 298-9-71 Knob — Steering Wheel 298-278-47 Carriage Bolt, 1/4" x 1/4" Cad. Plated 102-8077-14- Orbitrol Steering Unit (See Sep. Illus.)

Vibratory Roll Assy. (See Sep. Illus.)

602-5925-2 Frame for Vibratory Roll 502-7107-80 Top Bar — Scraper 102-3818-1 Rubber Scraper 102-3820-1 Bottom Bar — Scraper 102-3819-1 Cover — Roll Shaft 102-4518-1 Cover — Frame End 102-3655-1 502-6032-80K Fender (L.H.) (As Illus.)

502-6032-8k Fender (R.H.) (Opposite) Reflective Tape 4" x 72" 102-8732-1 Reflective Tape 6" x 72" 102-8733-1 Wheel — All Weather Traction Tire 502-5995-80 (Machines w/o Fluid Handling Systems)

.1502-7108-80

(Item 18 Continued)

No. Req'd.

1 8 1 1 2 6 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1 2 2 2 2 2 1 1 6 6 2

Item No.

Part Number

0 cD

Description

No. Req'd.

a

2

ti

502-4731-80

Wheel for Smooth Tire. 14" wide Rim x 30" Dia. (for Machines with Fluid Handling Systems) 502-4734-80 Wheel for Smooth Tire. 16.9" wide x 30" Dia. (Used for narrowing the 18 wheel base & replaces the above Cont'd. wheels in pairs only.

298-6014-68 Tire, 8 Ply — All-Weather 298-6048-68 Tire, Smooth 16.9 x 30" 298-6023-68 Tube for All-Weather Tire 298-6049-68 Tube for Smooth Tire 298-5534-68 Plug, Valve Hole #221 (for All-Weather Tire only) 502-5997-80 Fuel Tank , 298-25-98 Fuel Cock —11b/o9?Sitside of Tank Filler Cap 502-2799-80 Pipe Plug 1" Pipe Plug 34" 102-7947-1>c Support Angle Spacer — Fuel Tank 102-7948-1 502-2213-80A, Strap — Fuel Tank Cotton Webbing 34 6 " x 2" x 15 ft.

19 Sending Unit — Fuel Tank 298-2059-56 Gasket — Sending Unit 298-2511-68 Rd. Hd. Mach. Screw 10-32 x 1/2 " Lock Washer '46" Pipe Plug 1" (Drain) Strainer — Fuel Tank 298-5010-92 Reducing Bushing 3/8 " x 1/4" Hose — Fuel Line — Intake 502-2786 Hose — Fuel Line — Return 502-2787 Grille Shroud 502-6033-80 Removable Grille 502-4457-80

20 1

ta

2 2 2 2 2 2 1 1 1 1 2 1 1 4 1 1 1 5 5 1 1 2 .1 1 1 1

cD

it

m

MAIN FRAME — ENGINE HOUSING — ROLL

ROLL FRAME & SCRAPER — TRACTION DRIVE WHEELS

•, s nNI

031 NI tiel

SpecifyQuantity, Part Numberand Description When Ordering

FUEL TANK — HYDRAULIC TANK

Part Number

Item No. 21 22 23

Description

No. Req'd.

{502-5993-80A Shroud — Rad. & Hyd. Pump . Cap Screw % " x 1" Air Intake (See Power Unit) Air Exhaust (See Power Unit) 02-4519-1'K Engine Hood Side Panel 102-4520-1 102-7937-1.k Cover — Front Compartment Shell 502-6037-80A, Shell — Front Engine & Shell 02-6035-80( Hyd. Oil Tank Cover Plate 102-8412-1$ Cover Gasket 102-7864-1 Cap Screw 34" x 1" Pipe Plug 1" Pipe Plug 'V Pipe Coupling 1 14" Tube — Hyd. Tank 102-8510-1 Filter Element 298-133-53 502-2733-80X, Cover — Hyd. Tank Cap — Hyd. Tank 102-7320-1 Breather — Hyd. Tank 298-8001-89 298-13010-86 Drain Plug — Magnetized Sight Gauge — Hyd. Tank 298-2070-56 Plate — Seat Mounting 502-2822-80 Support — Seat Mounting *502-4485-80 502-2247-80c Post — Seat Support Mounting Plate — Seat Mounting Support — Plate 502-4664-80 Seat Support Post Sleeve 502-8029-80 Post .

Pin 102-8753-1 Hair Pin 298-50-47 REX Nameplate 402-1540-1

24 11

25

26

0 2

2

27 28 29 30 31 32 33 34 35 36

* When 502-4485-80 is needed for Service on machines Previous to HX-1571, Items 31, 32, 34 & 35 can be furnished.

1 4 1 1 1 2 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3

Always Give Serial Number of Machine

463-4

1

7 9

AIR CLEANER CYCLOPAC F.W. SERIES REX PART NO. 102-8103-1 DONALDSON CO., INC. #FWA10-0017

---______ Item No. 1 2 3 4 5 6 7 8 9

REX CHAIN WELT INC. PRINTED IN U.S.A.

part Number -

102-8103-2 102-8103-3

.

102-8103-4)e

Description Body Assembly (Reference Only) Yoke (Reference Only) Element Assembly (*P10-1234) Gasket Washer Thumb Screw (Reference Only) Clamp Assembly (Reference Only) Baffle Assembly (Reference Only) Cup Assembly (Reference Only) Cup Gasket (*P18663)

No Req'd.

1 1 1 1 1 1 1 1 1

R=Nbe Specify Quantity, Part Number and Description When Ordering ..oek

cp

cn

•V •S •nNI 031Nl b1d

POWER UNIT MUFFLER — AIR CLEANER — RADIATOR & HOSES TRACTION AND EXCITER DRIVE HYDRAULIC PUMPS (Cont'd.)

2 in

2

Item No.

Part Number

1

102-8358-1

*6K1-469

- - - - -

*5126687

m

afbi, Cu P

Description Diesel Engine — General Motors Corp.

Series 3-53 Model 5033-7201 with the following features: (See Engine Parts Book) S.A.E. #4 Flywheel for use with Rockford 11TT Clutch S.A.E. #4 Flywheel Housing Governor — Variable Speed with Closed Linkage set at 2400 F.L. and approx.

2600 N.L. Fan — 18" Dia. Suction — 5 Blade Fan Belt for Fan Mounted 12" above Engine centerline Air Inlet Housing for Remote Mounted H.D. Air Cleaner .

Lube Oil Filter, F.F. Mounted on Oil Cooler Exhaust Manifold, Center Vertical Outlet Water Connections less Radiator Conn.

Battery Charging Generator 12 Volt 25 Amp. Starting Motor 12 Volt (Sprag.)

Oil Pan, Shallow, for 10° Operation Oil Pan Dipstick for 10° Pan Breather on Flywheel Housing Plain Rocker Cover with Oil Filler on Side Injectors, S45 Exhaust Outlet Flange — 3" Pipe Thds.

Oil Cooler — Engine only C.S. Pulley — 2 Groove — Cone Drive (*6K1A-153)

No. Req'd.

Item No.

Part Number

Description

No. Req'd.

1 102-7774-1

1

Diesel Engine (Cont'd.)

Tachometer Drive Mounted on R.H. (Cont'd.)

Balance Shaft when viewing Engine from Flywheel End 90° Adapter — 1 to .500 Ratio giving a Cable Speed of twice Engine Speed *5124405 Gasket — Air Inlet Housing *5186687 Name Plate (Emergency Shut-down) *5184255 Name Plate (Pull to Stop) *1110955 Voltage Regulator 502-4399-80A Front Support — Engine 1 Cap Screw '4 6 " x 1 14" with L.W. 2 Cap Screw %" x 1 1/2 " with Nut & L.W. 2 5 022 4 2 57:801 Support — Rear (As Illus.) (R.H.) 1 {502-4257-81 Support — Rear (Oppos.) (L.H.) 1 5 H.C.-H.T. Cap Screw '4" x 1 3/, " w/L.W. 8 {102-3283-1 Adapter — Flywheel 1 6 Nyloc Cap Screw '4" x 1" — Soc. Hd. H.T, 6 102-5112421Drive Plate 7 1 8 2— Drive Plate le/SALM/Z 1 9 102-7362-1 Drilled Cap Screw 4 6 " w/L. 6 10 102-7361-1 Joint — Center Bonded 12 11 102-7360-1 Drilled Cap Screw 12 102-3666-1 Adapter Plate — Gear Pump 1 12 Cap Screw 34" x 11/2" w/L.W. 12 102-8704-1 Hydraulic Pump — Exciter Drive 13 (See Sep. Illus.)

1 Cap Screw 1/2" x 11/2" w/L. 4 {102-3694-1 Bracket — Mount — Vo ge Regulator 1 14 Cap Screw %" x 1" L.W. 2 15 502-2735-80 Bracket — Steerin ump 1 16 502-2736-80 Bracket — Steerin • Pump 1 17 Cap Screw 1/2" x f /" 1

Always GiveSerial Numberof Machine

0

1

1

,_

* General Motors Corp. Part Numbers — CcAA-0 Oa; /1- See Engine Parts Book. h4 s c4 46

04.-D P,442,7- Po te-

.2:SPida

POWER UNIT MUFFLER — AIR CLEANER — RADIATOR & HOSES TRACTION AND EXCITER DRIVE HYDRAULIC PUMPS Item No.

Part Number

1 1

f

z

m

0

6

m m

• 0

No. Req'd.

5 Cap Screw %" x 1" w/L.W. Cap Screw 1/2 " x 1 3/4 " w/C.W. & Lock Nut 2 19 102-7949-1 Hydraulic Pump (Steering) (See Sep. Illus.) 1 20 102-3675-1 Sheave — Steering Pump 1 21 "V" Belt (Maurey #3V-355) 1 22 102-3680-1 Adapter — Flange Yoke 1 23 Nyloc Socket Head Cap Screw 54," x 1" 4 Mounting Bushing 24 298-5515-68 4 25 Cap Screw V," x 3" w/Nut, L.W. & C.W. 4 26 aggN-V Flange Yoke 1 27 Shaft Yoke X203761 1 28 Sleeve Yoke 102-7036-1 1 29 Flange Yoke X203765 1 Snap Ring 30 X203741 4 Special Cap Screw %" x 1" w/L.W. 31 298-41-93 4 Companion Flange 32 1 102-7723-1 Cotter Pin 1/8 " x 2" 33 1 1 Slotted Nut 1"-20 U.N.F. 34 102-7725-1 H.C.-H.T. Cap Screw 74 6 " x 1 1/2 " w/Nut 35 & L. W. 4 Hydrostatic Pump — Traction Drive (See 102-8705-1 Sep. Illus.)

1 36 Cap Screw V," x 1'/2 " w/Nut & L.W. 4 1 Bracket — Hydraulic Pump 502-4398-80 Cap Screw 1/2 " x 1 1/2 " w/C.W. 4 37 4 Lock Nut V," 298-2010-71 Mounting Bracket (R.H.) 1 {102-3954-1 38 Cap Screw %" x 1" w/Nut, L.W. & C.W. 6 1 Mounting BraCket (L.H.) 02-3954-1 39 6 Cap Screw %" x 1" w/Nut, L.W. & C.W. 1 40 Radiator 102-6518-1 1 Oil Cooler 98-5054-92.

41 Cap Screw 5/, 6 " x 1" w/L.W. 4 1 502-2738-8C% Adapter — Exhaust 42 1 Muffler — Exhaust 43 28-5149-92 1 Elbow — Exhaust 44 298-5153-92 2 Muffler Clamp 45' - 298-205-47 18

0

Description

f

Item No.

Part Number

46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

102-8103-1 298-5127-92 298-5126-92 298-5091-92 298-9016-86 298-6509-68 298-5092-92 502-2781-80 502-2780-804 298-216-47 102-3289-1 K. 298-5573-68 298-9005-86 298-20-98 502-2157-80

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

I

Description

298-6085-17 102-6973-1 298-2066-56 102-8672-1 X202821 T102-8523-1 1102-8523-2 298-3294-17 298-252-47 298-5154-92 298-5155-92X 298-205-47 502-2754-80 502-2786-80 502-2787-80 298-2067-56 298-92-47 298-2071-62

1

Air Cleaner (See Sep. Illus.)

Cap — Air Cleaner Mounting Band Straight Hump — Air Cleaner Hose Clamp Indicator — Air Cleaner Elbow 4" x 90° Adapter Tube — Air Inlet Tube — Air Cleaner Tube Clamp Hose — Upper — Radiator Hose — Lower — Radiator Hose Clamp Drain Cock — Radiator Bracket — Stop — Pump Square Head Set Screw 3/8 " x 1 14" Hex Nut %" Switch — Neutral Start Special Nut Oil Pressure Sending Unit Control Cable — Direction Ball Joint ( 1411-28) Battery Cable 73" Battery Cable 30" Battery — 65 Amp. Hr. Frame with Clamp (Battery) Carriage Bolt 54 6 " x 10" w/Nut & L.W. Exhaust Extension Weather Cap Clamp — Exhaust Lever — Pump Control Hose — Fuel Line — Return Hose — Fuel Line — Inlet Water Temperature Sending Unit Ether Cup Adapter 90° Inlet Line to Fuel Filter

No. Req'd.

1 1

2

1

4 1 1 1 1 1 1 1 4

1 1

2 2

1 1 1 1 1 1 1 1 1

Ii 0

2

1 1 1 1 1 1 1

1 1

cb O

au cD

Always Give Serial Number of Machine

463-8

10

HYDROSTATIC PUMP — TRACTION DRIVE SUNDSTRAND MODEL NO. HT22-2081 REX Part No. 102-8705-1 Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Part Number

Description

Control Valve (*9800893) Gasket — Control Valve (*9800138) Charge Pump (*9800629-04) Gasket — Charge Pump (*9220327) Check Valve (*9800648) Seal Kit (*9510022) Consists of Items 7 thru 11 Inclusive Shaft Seal *9210247 Housing Seal Retainer *9210248 Seal Spring *9220242 "0" Ring *9004102 *9004100-2340 "0" Ring Retaining Ring (*9006320-0025) 102-4365-47 Charge Pump Relief Valve Poppet 102-4365-52 (*9800597) Cotter Pin (*9004600-0607) 102-4365-48 102-4365-49 Pin (*9220441) Washer (*9009610-2850) 102-4365-50 Orifice (.036" Dia.) (*9800483) "0" Ring for .036" Orifice Control Shaft Handle (*9800690) 102-4365-46 102-4365-4 102-4365-6 102-4365-7 102-4365-11 102-4365-12 102-4365-1

No. Req'd.

1 1 1

1 1 1 1

1

6 2 1 3 1 1 1 1 1

3 1

* Sundstrand Corp. Part Numbers REX CMAINBELT INC. PRINTED IN U•S•A.

Specify Quantity, Part Number and Description When Ordering 1=ipi■

viii

ev)

TRAC TION DRIVEH YDRAU LICSCH EMA TIC R EX SE LF- PR OPE L LEDVIBRA TORYROLLER

Always Give Serial Number of Machine

463-9

Lr1 CO

U 0

f-■

R

EX Specify Quantity, Part Number and Description When Ordering

REX CHAIM:DELT INC. PRINTED IN U.S.A.

NI03 INI LIel •v •s . n

IA rl

HYDRAULIC PIPING FOR TRACTION DRIVE Item No.

Part Number

1

102-3691-1

2

102-3688-1

3

502-2783-80

4

502-8005-80

5 6 7

298-8118-86 298-8078-86 102-8705-1

8

102-3849-1

9 10 11 12 13 14 15 16 17 18 19

102-1594-4 298-8033-86 502-6035-80 298-8001-89 102-7320-1 102-7864-1 502-2733-80 102-8510-1 298-133-53 102-8506-1

Description Hose Assy. 1" w/Flange Elbow 45° Both Ends Hose Assy. 34" I.D. with 1/4" Male N.P.T.F. & 1'4 6 "-12 Female Swivel El. 90° Hose Assy. 14," Female N.P.T. Both Ends Hose Assy. 54," I.D. x 20" with V," Male N.P.T. & 7/8 "-14 JIC Female Swivel Elbow 74" x 45° Straight Adapter 74," N.P.T. to 1'4 6 " JIC Hydrostatic Pump — Traction Drive (See Sep. Illus.)

Hose Assy. 3/4 " I.D. x 30" lg. 1/4" Male N.P.T. Both Ends "0" Ring — 1 54 6 " I.D. x 1'4 6 " O.D. Split Flange Clamp 1" Cap Screw 34" x 1 14" HC, HT w/L.W. Hydraulic Tank Breather Filler Cap Cover Gasket Cover for Hydraulic Tank Tube — Reservoir Filter Element Hydrostatic Motor (See Sep. Must.)

No. Req'd.

2 1 1 1 3 1 1 1 4 8 16 1 1 1 1 1 1 1 1

Always GiveSerial Numberof Machine

I

TRACTION DRIVE RIGID PLANET AXLE ASSEMBLY INCLUDES TRANSMISSION & WHEEL ENDS ROCKWELL STD. PART NO. 35-3380-A REX Part No. 102-8095-1

m

28

C)

32 7

31 v

23 24 25

0

z

DIFF. CASE 7 PLAIN HALF

0,

V.

12 DIFF. CARRIER

z

7

1

( 19, 7

a

.

38 7

28

DIFF. CASE FLANGED HALF

O

5 7 z 22 9

0 23

24

v 20 --e

a•

7 e DIFF. i 25 cP 77 Y CARRIER 7 7

COVER

15 14 /

utz

18

z

cp

a

13 0

17

16 19 —

V

O

a,

z z

X

TRACTION DRIVE RIGID PLANET AXLE ASSEMBLY INCLUDES TRANSMISSION & WHEEL ENDS ROCKWELL STD. PART NO. 35-3380-A RPX Part No. 102-8095-1

a

a

1 Item No.

Part Number

1

102-6168-57

2

102-1514-20 102-1514-22

{

102-1514-23 102-1514-24 102-6168-73

102-1514-18

102-1514-15 102-1514-14 8

102-7572-20

9 10 11 12 13 14 15

102-8095-84 102-8095-48 102-8095-42 102-8095-30 102-8095-85 102-8095-28 102-1514-16

16

102-8095-29

17 18

102-7872-26 102-7872-38

Description

No. Req'd.

Cone — Bevel Pinion Brg. (Inner & Outer) (*55176-C) Cup — Bevel Pinion Brg. (Inner & Outer) (*55443) Shim — Bevel Pinion Brg. .003 3 (*2803-W-1791) 3 .005 (*2803-X-1792) 1 .010 (*2803-Y-1793) Spacer Set; Bevel Pinion Brg. AR .219 (*2203-N-1054) thru (Two, As Required) AR .254 (*2203-Y-1065) Matched Set; Gears (XA35350) 1 Ring Gear (*35350) 1 and Pinion (*35131) (Not Sold Separately) Bearing — Bevel Pinion Brg. (Rear) 1 (*1228-Z-52) Lock Ring — Bevel Pinion Brg. 1 (*1229-Z-1300) Plug — Diff. Carrier — Inspection 1 (*1250-5-149) 2 Flange — Axle Tube (*3897-Z-2886) 2 Snap Ring (*1854-C-289) 2 Oil Seal — Axle Shaft (*A1205-W-829) 2 Axle Shaft (*3802-Y-1507) Axle Tube (R.H. & L.H.) (*A-3816-5-617 2 1 Cover — Diff. Carrier (*A48-3800-Z-468) Gasket — Diff. Carrier & Cover 1 (*2208-L-272) Carrier — Differential (L.H.) 1 (*A3-3800 -Y-649) 1 Pin for Thrust Block (*1246-G-293) 1 Thrust Block (*2297-A-573)

Item No. 19

20

Part Number 102-7872-14 102-7572-14 102-6168-42 102-6168-41

21

102-7872-16

22

102-6168-28 102-8095-20

23 102-8095-21 24 25 26

27

28

L

102-1514-9 102-1514-5 102-8095-87 102-1574-41 102-7872-21 102-7872-22 102-6592-64

29 30

102-1574-22 102-6972-1

Description Plug — Diff. Case Drain (*P-18) Plug — Diff. Case Filler and Level (*P-18) Bolt — Diff. Carrier Flange (*S-1814-1) Nut — Diff. Carrier Flange (*N-18-1) Lock Washer — Diff. Carrier Flange (*WA-18) Cap Screw — Diff. Carr. Flange (Front) (*S-2811-1) Oil Breather — Diff. Carr. Cover (*A-1199-J- 166) Spacer Set — Diff. Brg. Cup .146" (*1244-D-394) thru .164" (*1244-K-401) Contains .146", .149", .152", .158", and .164". and .134" (*1244-K-479) thru .179" (*1244-T-488) Contains .134", .140" , .170", .176" and .179".

Cup — Diff. Brg. (*33472) Cone — Diff. Brg. (*33281) Case — Diff. — Flanged Half (*3235-X-882) (Not Sold Sep., Part of Item 38) Case — Diff. — Plain Half (*3235-P-354) (Not Sold Sep., Part of Item 38) Bolt — Diff. Case (Short) (*15-X-926) Bolt — Diff. Case (Long) (*15-X-927) Bolt — Diff. Case & Drive Gear (*15-X-667) Nut — Diff. Case & Drive Gear (*N-28-1) Differential — Internal Assy. — No Spin (*A2-3235-G-397) Items 31 thru 37, Assembled. (Detroit Auto Co. #NS-21-63061)

No. Req'd.

1 1 10 10 12

Always GiveSerial Numberof Machine

m

0

2

1

AR AR 2 2 1 1 4 8 12 12 rn

1

TRACTION DRIVE RIGID PLANET AXLE ASSEMBLY INCLUDES TRANSMISSION & WHEEL ENDS ROCKWELL STD. PART NO. 35-3380-A REX Part No. 102-8095-1

Item No. 31 32 33

Part Number

34

'V •S 'll NI 03.L NI del

35 36 37 38

A II X

0 I

0

102-8095-86

Description Side Gear Spring Spring Retainer Cam & Clutch Assy.

Holdout Ring Snap Ring Center Cam Spider Case Assy. with No Spin Internal Assy. (*A84-3235-X-882) Contains Items 26, 27, 28, 29 & 30.

No. Req'd.

2 2 2 2 2 1 1 1 1

Always Give Serial Number of Machine

463-14

HYDROSTATIC MOTOR — TRACTION DRIVE SUNDSTRAND MODEL 22-3055 REX PART NO. 102-8506-1

Item No.

Part Number

1 2

102-4365-78 102-4365-1

3

102-4365-77

Description Manifold Assembly (*9800834-53) Seal Kit (*9510022) Consisting of: *9210247 Shaft Seal *9210248 Housing Seal *9004102-1290 "0" Ring *9004100-2340 "0" Ring *9220242 Seal Spring Relief Valve Assembly (*9800370-55)

No. Recfd .

1 1 1 1 2 1 6 1

*Sundstrand Corp. part numbers.

REX CHAINBELT INC. PRINTED IN U.S.A.

Pt

Specify Quantity, Part Number and Description When Ordering

EV'

rn

12 REAR — Bolts on to Diff. Carrier Hsg.

40

39

32

43 24 25

23

26

28

33

k9

20 21 31

18 16

19

29 30

14

•V •S •fl NI 03 1NI .c1

FRONT

C)

m

TWO-SPEED TRANSMISSION CASE FOR TRACTION DRIVE AXLE Part of ROCKWELL STD. PART NO. 35-3380-A and REX Part No. 102-8095-1

34

•-• V1

0 0

Ei

Item No.

Part Number

1

102-6168-35

0

102-6168-36 102-6168-37 298-115-2 298-45-2 7

102-1781-1 102-8095-26 102-6168-43 102-6168-65 102-6168-66 102-6168-67 102-6168-68

10 11

12 13 14 15 16 17 18 19 20 21

f

102-6974-13 102-6168-44 102-6168-42 102-6168-41

{102-6168-10 102-6168-11 102-8095-14 102-6168-14 102-6168-15 102-6168-16 102-7872-14 102-7872-14 102-6168-47 102-6168-48 102-8095-25 102-8095-88 102-6168-53 102-7872-44

Description

No. Req'd.

Nut — Input Brg. Adjusting (*1827-A-287) 1 Lock for Adj. Nut (*1829-P-874) 1 Washer — Input Pinion Brg. (*1829-U-879) 1 Cone — Input Pin. Brg. (Inner & Outer) (*395-A) 2 Cup — Input Pin. Brg. (Inner & Outer) (*394-AS) 2 Gasket — Hyd. Motor Adapter (Outer) 1 Adapter for Hyd. Motor (*A-3897-M-2405) 1 Gasket — Hyd. Motor Adapter (Inner) (*2808-X-1090) 1 Bolt — Case & Cover (*S-1611-1) 10 Nut — Case & Cover (*N-16-1) 10 Lock Washer — Case & Cover (*WA-16) 10 Dowel. Trans. Case to Cover (*1846-A-313) 2 Cover — Trans. Case (*3876-R-408) 1 Stud — Hyd. Motor Adapter (*4-X-733) 6 Nut — Hyd. Motor Adapter (*N-18-1) 6 Lock Washer — Hyd. Motor Adapter (*WA-18) 6 Cap Screw (Front & Rear Cap) (*S-2710-1) 7 Lock Washer Id. Pin. (Front Cap) (*WA-17) 4 Cap — Idler Pinion (Front) (*3866-D-992) 1 Shim, Idler Pinion Front Brg. .003" (*2803-C-2083) 3 .005" (*2803-D-2084) 3 .010" (*2803-E-2085) 1 Plug — Oil Filler (*P-18) 1 Plug — Oil Drain (*P-18) 1 Pinion — 24T Input Drive (*3891-C-1199) 1 Nut — Clutch Dr. Pinion (*1827-Y-285) 1 Collar — Shift (*3897-D-2526) 1 Pinion, 24T Clutch (*A-3891-R-1448) 1 Set Screw — Clutch Pinion (*S-865) 1 Spring — Hi-Lo — Shift Shaft Lock (*2858-W-257) 3

Item No.

Part Number

22 23 24 25

102-6168-52 102-6592-94 102-8095-89 102-6168-31

26

1102-7872-23

27

102-6168-33 102-6168-54

28

102-8095-18

29

102-2515-68

30 31

1

102-7872-17 102-7872-11 102-8095-90

32 33

102-6168-34 102-6168-24

34 35

102-7872-55 102-7872-18

36

102-6168-17

37

102-6168-18

38

102-6168-19

39 40 41 42 43

102-8095-17 102-6168-20 102-6168-22 X7857 102-6168-56

44 I

102-6168-11

IP'

Description

No. Req'd.

Shift Ball (*1898-H-34) Shift Shaft (*2843-A-521) Oil Seal — Shift Shaft (*A-1805-Z-26) Hi-Lo Shift Fork (*2849-B-158) Set Screw (*26-X-96) Lock Wire (*LW-168) Bushing — Lo-Speed Drive Gear (*1825-M-117) Gear — Lo-Speed Driven 45T (*A-3892-8-2524) Gasket — Trans. Case to Cover (*2808-H-1100) Cap Screw — Trans. Case to Carrier (*S-2910-D1) Lock Wire — Trans. Case to Carrier (*LW-1620) Transmission Case (*A2, A3-3875U-645) Plug — Shift Shaft Hole (*1850-Z-78) Gasket — Id. Pin. Rear Brg. Cap (*2808-W-1089) Cap — Id. Pinion (Rear) (*3866-G-1021) Cap Screw (Special) Id. Pin (Rear) Cap (*S-7710-5) Cup — Id. Shaft Pin. Brg. (Front) (*25821) Cone — Id. Shaft Pin. Brg. (Front) (*25878) Gear — 55T — Lo-Speed Idler (*3892-N-2484) Pinion 34T — Idler Shaft (*3891-N-1418) Key — Lo-Speed Gear (*16-X-103) Cone — Id. Shaft Pin. (Rear) (*3877) Cup — Id. Shaft Pin. (Rear) (*3820) Oil Seal — Bev. Pin. Brg. (*A-1805-Y-545) Lock Washer — Id. Pin. Brg. Cap (Rear) (*WA-17)

3

1 1 1 1 1

1 1 1 8 1

1 1 1 1 1 1 1

1 1 1 1 1 1 7

Always GiveSerial Numberof Machine

TWO-SPEED TRANSMISSION CASE FOR TRACTION DRIVE AXLE Part of ROCKWELL STD. PART NO. 35-3380-A and REY Part No. 102-8095-1

m

49

fyQuanti ty, Part Numberand Description WhenOrdering

52 21

1

57 / 51 53

55 27 26 4 241 5859

/

1

18

2 19 22

23

10 a•

9 12 •

63 50 m

z

0

z z

29

31 WHEEL ENDS FOR TRACTION DRIVE AXLE Part of ROCKWELL STD. PART NO. .35-3380-A and RF X Part No. 102-8095-1

14

16

0

cp

•V •S , NI 031 N1 llc1

0

ti

ti

8 5'

ts 0 a cp

ri m

0

WHEEL ENDS FOR TRACTION DRIVE AXLE Part of ROCKWELL STD. PART NO. 35-3380-A and RFX Part No. 102-8095-1 Item No.

Part Number

1 2 3 4 5 6 7 8 9

102-6592-23 102-8095-64 102-7572-57 102-8095-69 102-7572-58 102-8095-72 102-8095-73 102-8095-74 102-7572-63

10 11

102-8095-67 102-7572-86

12 13 14 15

102-8095-70 102-8095-42 102-8095-57 102-8095-36

16 17 18 19 20

102-6592-36 102-8095-33 102-8095-56 102-8095-68 102-1841-72

21 22 23 24 25 26 27 28 29 30 31 32

102-8095-60 102-8095-71 102-8095-75 102-8095-76 102-8095-62 102-8095-77 102-6592-13 102-8095-50 102-7572-46 102-8095-78 102-8095-40 102-8095-37

Description

No. Req'd.

Push Rod — Wheel Cyl. (*A-1245-W-49) 4 Wheel Cyl. Assy. (*Al2-3261-P-16) 2 Spring — Brake Shoe Return (*2258-T-124) 2 Washer — Guide Pin (*1729-N-248) 16 "C" Washer — Guide Pin (*1229-H-216) 8 Brake Shoe (*3722-V-334) 4 Lining — Brake Shoe (*2740-Q-3137) 4 Rivet — Brake Shoe to Lining (*RV-387) 64 "C" Washer — Brake Anchor Pin (*1229-M-221) 4 Anchor Pin — Brake (*1759-L-38) 4 Bushing — Brake Anchor Pin (*1225-P-94) 4 Strap — Anchor Pin (*1245-X-50) 2 Oil Seal — Axle Shaft (*A-1205-W-829) 2 Spindle — Wheel (*A-3897-C-2447) 2 "0" Ring — Spindle to Housing (*5-X-591) 2 Nut — Spindle to Housing (*1827-R-252) 24 Bolt — Spindle to Housing (*S-1920-1) 24 Spacer — Brake to Hsg. (*3897-R-2072) 2 Nut — Anchor Pin (*N-114) 4 Lock Washer — Anchor Pin Nut (*WA-114) 4 Backing Plate — Brake (*A-3736-Q-771) 2 Bracket — Shoe Anchor (*3764-M-29) 2 Rivet — Anchor Bracket (*RV-169) 12 Guide Pin — Brake Shoe (*1746-G-59) 8 Adjusting Cam Assy. (*A-2747-A-105) 4 Spring — Adj. Cam (*2758-U-153) 4 Cam — Adjusting (*2847-R-200) 4 Drum — Brake (*3819-H-450) 2 Nut — Wheel Hub (*1199-H-112) 16 Stud — Wheel Hub (*20-X-262) 16 Hub — Wheel Assy. (*A-322-J-452) 2 Cap Screw — Planet. Spider to Hub (*10-X-667) 32

Item No.

Part Number

33 34 35 36

102-8095-34 102-8095-31 102-8095-32 102-8095-47

37 38 39

102-8095-51 102-8095-52 102-8095-45

40 41 42

102-8095-55 102-8095-46 102-8095-49

43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

102-8095-48 102-8095-53 102-8095-41 102-8095-39 298-65-2 102-6592-83 102-8095-54 102-8095-58 102-7980-21 102-8095-79 102-8095-80 102-7873-17 102-8095-81 102-8095-82 102-8095-83 102-8095-43 102-8095-35 298-162-2 102-8095-38 102-8095-44 102-8095-30 102-8095-61

Description

No. Req'd.

"0" Ring — Hub to Spider (*5-X-589) 2 Plug — P1. Spider Drain (*P-16) 2 Set Screw — Planet. Pinion Shaft (*S-665) 6 Snap Ring — Planet. Pinion Shaft (*1854-Z-182) 6 Shaft — Planet. Pinion (*3880-H-814) 6 Pinion — Planetary (*3891-W-1115) 6 Washer — Planet. Pinion Thrust (*1829-C-783) 6 Spider — Planet. Pinion (*A-3897-E-1695) 2 Pin — Hub Brg. Adj. Nut (*1846-W-361) 2 Thrust Button — Axle Shaft (*1898-Z-858) 2 Snap Ring — Axle Shaft (*1854-C-289) 2 Gear — Planetary Sun (*3892-T-1814) 2 Nut — Hub Brg. Adj. (*A-1227-H-736) 2 Cone — Hub Brg. (Outer) (*34300) 2 Cup — Hub Brg. (Outer) (*34478) 2 Plug — Planet. Spider Filler (*P-212) 2 2 Gear — Planet. Ring (*3892-G-2997) 2 Slinger — Oil (*3905-B-80) Gasket — Inlet Connection (*2208-V-204) 2 Bleeder Screw (*1199-H-1334) 2 Inlet Connection (*1199-D-784) 2 4 Lock Washer — Wheel Cyl. (*WA-16) 4 Cap Screw — Wheel Cyl. (*S-267) Gasket — Inlet Conn. Bolt (*2208-D-82) 2 Bolt — Inlet Conn. (*15-X-88) 2 2 Oil Seal — Hub Brg. (*A-1805-Z-546) 2 "0" Ring — Spindle (*5-X-590) 2 Cup — Hub Brg. (Inner) (*27620) Cone — Hub Brg. (Inner) (*27691) 2 2 Bushing — Wheel Spindle (*1825-Z-234) 2 Shaft — Axle (*3802-y-1507) Brake Shoe & Lining Assy. Contains Items 6, 7 and 8, Assembled 2 (*A3-3722-V-334)

Always GiveSerial Numberof Machine

.4..:

in

m

Ry 0 A, A 4/L /C

49

58

TANK

50 37

•, •11 '11P41 031 1'41 1dd

Quantity,PartNumberand Description WhenOrdering 0 I

39 38J3

44

I /NA A//FOLO BL 0 C

f 70 TR 4 cT OR

43 18 27

33 15

48

14 51 13 53 54 55 56

12

27

47 "Aro M 7"4 A-C.

/ 4

\=ittu)

/

-34 O M.

31

17

12

26

10 59

9-0

z

m

13

HYDRAULIC PIPING FOR VIBRATOR

•V •S •11 Ni 03 1NI Llei

HYDRAULIC PIPING FOR VIBRATOR X 0

z w in

z0

Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

298-2078-62 502-1350-94 298-14503-86 298-8080-86 298-17002-86 298-14500-86 298-12002-86 298-2247-62 298-12001-86 502-1347-85 298-2170-62 298-8076-86 X7487 102-4365-79 102-5254-1 298-8030-86 298-2093-62

18

298-2245-62

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

102-1594-4 298-8033-86

102-3695-1 102-3702-1 298-12003-86 298-2081-62 298-2246-62 293-17010-86 102-8580-1 298-12-93

34 35 36 37 38

298-2075-62 X7484 298-2244-62 298-19-1 298-15-1

X7604 102-8094-1 298-9035-86

Description Pipe Coupling 1" N.P.T. Hose-Tank to Cooler 72" lg.

Reducing Bushing 1/4" x V. Straight Adapter 74" X 1/4" Pipe Tee 1/4" Reducing Bushing 1" x 1/4" Close Nipple 34" Elbow 1/2 " x 90° Close Nipple '/2 " Hose — Cooler by-pass Check Valve Elbow 1 54 6 " "0" Ring x JIC Street Elbow '/2 " N.P.T. x 90° Manifold Relief Valve Manifold Block Elbow V — "0" Ring x JIC x 90° Elbow 14" — "0" Ring x 1/2 " N.P.T. x 90° Elbow'/" — "0" Ring x '4" N.P.T. x 90° "0" Ring — S.A.E. 1" Split Flange Clamp 1" Cap Screw 34 x 11/4" HC, HT w/L.W. '46" Cold Shut Connecting Bar Hose Clamp Cap Screw 1/2 " x 1" w/L.W. & Nut Hose 1'4 6 " x 54 14" lg.

Hose 1 54 6 " x 53'4" lg.

Nipple 1/4" N.P.T. Street Elbow 14" N.P.T. x 45° Service Tee 1/2 " N.P.T. — F Tee '4" N.P.T. — F Hydraulic Motor — Vibrator Cap Screw, Self-Locking 14" x 1'/2 " w/L.W. Nylok #M4BS813-24C Elbow '/2 " N.P.T. x 90° Reducing Bushing V," x 'V N.P.T. Adapter 1/4" Female to 1/2 " Male N.P.T.F. 1 Elbow '4" Tube x '4" N.P.T. Connector 1/4" x 1/4" N.P.T.

No. Req'd.

Item No.

1 1 1 1 1 1 1 1 4 1 1 2 2 1 1 1

39

Part Number

40

102-3998-1

41

102-3948-1

42

102-3946-1

43

102-3946-2

44

102-3849-3

45

502-2785-80

46

502-1347-84

1

47

502-8004-80

2 10 20 40 3 1 1 1 1 1 1 1 2

48

502-1341-97

49

298-2086-56 502-8007-80

2 1

50 51 52 53 54 55 56 57

Copper Tube '4" O.D. x .037" Wall x 48" lg.

Hose Assy. 1" I.D. x 33" lg. Has Strait Flange Hd. & 90° Flange El. Hose Assy. 1" I.D. x 26" lg. Has 45° Flange El. & 90° Flange El. Hose Assy. 1" I.D. x 56" lg. Has 90° Flange El. — Both Ends Hose Assy. 1" I.D. x 62" lg. Has 90° Flange El. — Both Ends Hose Assy. 1/4" I.D. Has 34" Male N.P.T. — Both Ends Hose Assy. '4" I.D. x 88" lg. Has '4" Male N.P.T. & %"-14 Fem. Thread Hose Assy. 34" I.D. x 33" lg. Has 1/4" Male N.P.T. One End & '4" N.P.T. w/Swivel Other End Hose Assy. 34" I.D. x 62" lg. Has 14" Male N.P.T. to %" Male N.P.T. Hose Assy. 34" I.D. x 72" lg. Has '4" Male N.P.T. & '4" Male N.P.T. w/Swivel Vacuum Gauge Bracket — Vacuum Gauge Rd. Hd. Mach. Screw 54 6 " x 1" w/L.W. & Nut Straight Adapter'/" "0" Ring x '/2 " N.P.T. Pipe Coupling '4" N.P.T. Galv.

"0" Ring "0" Ring Back-up Ring Cap Screw '4 6 " x 31/4" HC, HT Swivel Adapter 1/4" N.P.T. x 90° Hyd. Tank (Prey. to HX202) Hyd. Tank (Eff. HX202, up) Oil Cooler — General Radiator Inc. #0C-2409; Perfex Corp. #A18-953 Hyd. Pump — Vibrator (See Sep. Illus.)

—

102-4365-33 102-4365-40 102-4365-41

59

298-2068-62 {502-6035-80 502-6230-80 298-5054-92

60

102-8704-1

58

4 1 1 1 1 1

298-2248-62

No. Req'd.

Description

1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 6 1 1 1 1 1

4b3-21

Always Give Serial Number of Machine

HYDRAULIC MOTOR — VIBRATOR

REX Part No. 102-8580-1

REX

Specify Quantity, Part Number and Description When Ordering

REX CHAINBELT INC. PRINTED IN U.S.A.

Always Give Serial Number of Machine

463-22

HYDRAULIC MOTOR — VIBRATOR REX PART NO. 102-8580-1 COMMERCIAL SHEARING & STAMPING CO. NO. M25X-778-BEVL-15-7 Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

102-7884-10 102-7883-22 102-7883-23 102-7883-11 102-7884-14 102-7884-15 102-7883-28 102-7883-29 102-8580-11 102-7884-19 102-7883-33 102-7883-34 102-7883-35 102-7883-15 102-7883-17 102-7884-24 102-7883-16 102-7883-10

Description

No. Req'd.

Check Assembly (*M1391K) Shaft Bushing (*AH2010) Spring (*A1327-182) Roller Bearing (*S1032) Retainer Ring (*LA1072) Hi-Pressure Seal (*X73-50-3) "0" Ring (*63006-26) Tapered Roller Bearing (*X126-8) Shaft End Cover (VB-1686-8) Drive Gear (*KA1007M-15) Shaft (*PB1135) Spacer (*YA-1669-1) Retaining Ring (*X97-100) Thrust Plates (*Y1058) Gasket (*UB3006-244) Gear Housing (*MA1688-15-64) Pocket Seal (*K3026-27) Port End Cover (*RA1603)

2 1 1 4 1 1 1 1 1 2 1 1 1 4 2 1 12 1

*Commercial Shearing & Stamping Co. - 1775 Logan Ave. Youngstown, Ohio 44501 part numbers.

REX CHAINEELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

LX

ellitio

nq

/fir(

,

‘7

• .

(4'

■

--

1

, / ti , ir) /71,(a4c

( r (

i

,

•

/ ,. .

i , .,, 1

I

■

)

JO (. /7

'

,

,

azu "S EX Specify Quantity, Part Number and Description When Ordering RIGH TSID EVIBRATORY ROLLA SSEM BLY

e

I,- i 4. //, 1 ''3 13 32 1 , , Nmiti \,,

, O.,. , ,1 0\- . i ; 25 .W ., ,,,i,/, 0 fi e } ( ire t' ,ath 35 ,3/4 33 ;- -,,,( 5 6 .1) ,. 0 29 28 A /' ", Ti i , . , (U#, (21 26 / °0 , ,,,1-1

. 0

22 21 __-_---201 9 /., _ 19 ' ' _ ____-- _ 1 ,/ I..

25 18 3 24za zr r, 1, 1 7 • „ I, • 16 i i5 . e till t ') 9/2''(, ',/* . I/ / 14 11 2 13 %14 ,r, ( 7 I ' ,,/ ,‘ , 12 11 °' ■I . ,_ la. 0/ ee 10 98 r- °:1411111141 7 6 ,_ 4 ko .0

,. ., - - - -__.

463-23

Always Give Serial Number of Machine

REX CHAINBELT INC

PRINTE0 IN J 5 4

0

m cm z

RIGHT SIDE VIBRATORY ROLL ASSEMBLY

rn tI

Item No. 424

1 2

a, z Or

3

4

502-5979-80 102-3647-1 - 298-28-93 102-3248-1 298-5000-34 .

502-4383-80 - 298-2016-71 _102-8085-6 502-4384-80 -

6

298-6035-68 298-6036-68 402-2604-2 {298-19-93 102-4516-1 I102-7900-1

7 8 9 10 11 12 13 14 15

298-3093-68 102-7897-1 102-7897-2 102-7897-3 298-275-2 298-274-2 402-2605-2 102-3646-1 298-3094-68

a.

8

Part Number

5

O

1:1

0 ti

Description Roll Cover Cap Screw, Self-Lock 3/8 " x 1" Plate — Lubrication Pop Rivet Tire Housing Half Cap Screw %" x 2 34" Nut %" Self-Lock Safety Walk Tape Wheel 15" Cap Screw 5/8 " x 2'4" w/L.W. Tire — Radial Ply 5:00-15 Tube — 5:00-15 Mounting Flange — Motor & Wheel Flat Head Machine Screw 3/8 " x 1" Ring — Bearing Carrier Tab — Bolt Lock Cap Screw %" x 1'4" H.C. — H.T. Oil Seal 7' 54 6 " I.D. Shim, .005" (As Req'd.)

Shim, .0075" (As Req'd.)

Shim, .020" (As Req'd.)

Bearing Cone Bearing Cup Hub — Wheel Spacer — Bearing Oil Seal 8'/2 " I.D. —

No. Req'd.

1 1 2 1 4 2 4 4 2 1 6 1 1 1 4 1 6 6 1 6 6 6 2 2 1 1 1

Item No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29

Part Number 298-3089-68 1.402-2607-2 298-32-93 X7846 X7328 1613-B 298-273-2 402-1693-2 298-12-93

30

502-2998-80 298-4006-47 102-8649-1 298-6004-34 102-8651-1 {502-4648-80 298-62-93

31 32 33 34

298-103-17 502-205-80 298-289-2 298-7517-34

35

102-3932-1

Description Oil Seal — 334" I.D. Hub — Roll, Driven (R.H. side) Cap Screw 34" x 3", Self-Lock Setscrew 3/8 " x 2" Soc. Hd. Dog Point Grease Hose 34 6 " I.D. x 12" Cut Washer %" Rubber Grommet Pipe Coupling '4" Lube Fitting'/8 "-90° Spherical Bearing Retainer — Labyrinth Cap Screw le x 1'4" Self-Lock Lock Washer '/2 " Roll Shaft with Weights Hub Cap Gear — 30T Roll Pin Spacer — Gear Bearing Flange Cap Screw '4" x 1'4" Self-Lock Lock Washer '/2 " Magnetic Pick-up Cord Assy.

Sealed Bearing Snap Ring — Internal #N5000-244 Tru-Arc Waldes Kohinoor, Inc. Shaft — Coupling to Roll Shaft

No. Req'd.

1 1 8 3 1 2 1 1 1 1 1 8 8 1 1 1 1 1 1 4 4 1 1 1

Always GiveSerial Numberof Machine

; X

1 1

1

m

rn

1.&)

OUltpeN Jo

zaqunw [Win'OAID SAPAirti SpecifyQ ua nti ty,Part N umberand Description WhenOrdering

•V •S •11 NI 03 1 141 i1c1

m 0

2 2

z

LEFT SIDE VIBRATORY ROLL ASSEMBLY Item No.

1 2

3

4

Part Number 502-5979-80 102-3647-1 298-28-93 - 102-3248-1 298-5000-34 r502-4383-80 298-2016-71 102-8085-6 r502-4384-80

6

298-6035-68 298-6036-68 402-2604-2 -7 298-19-93 '--102-4516-1 - 102-7900-1

7 8 9 10 11 12 13 14 15

29 8-3093-68 102-7897-1 102-7897-2 102-7897-3 298-275-2 298-274-2 402-2605-2 102-3646-1 298-3094-68

s

Description Roll Cover Cap Screw, Self-Lock 34" x 1" Plate — Lubrication Pop Rivet Tire Housing Half Cap Screw 1/4" x 21/4" Nut 1/4" Self-Lock Safety Walk Tape Wheel 15" Cap Screw %" x 2'/4" w/L.W. Tire — Radial Pl y 5:00-15 Tube — 5:00-15 Mounting Flan ge — Motor & Wheel Flat. Head Machine Screw 3/8 " x 1" Ring — Bearin g Carrier Tab — Bolt Lock Cap Screw 34" x 11/4" H.C. — H.T. Oil Seal 715461: I.D. Shim, .005" (As Req'd.)

Shim, .0075" (As Req'd.)

Shim, .020" (As Req'd.)

Bearing Cone Bearin g Cup Hub — Wheel Spacer — Bearin g Oil Seal — 8'7'2 " I.D.

No. Req'd.

1 1 2 1 4 2 4 4 2 1 6 1 1 1 4 1 6 6 1 6 6 6 2 2 1 1

1

Item No. 16 17 18 19 20 21 22 23 24

Part Number 298-3089-68 t402-2606-2 298-32-93 X7846 X7328 1613-B 298-273-2 1402-1693-2 298-12-93

25 26 27 28 29 30 31 32 33 34

502-2998-80 102-8580-1 -

298-7020-34

298-3095-68 102-7974-1 102-7976-1 298-2045-71 102-7975-1

Description Oil Seal — 31/4" I.D. Hub — Roll, Driven (L.H. side) Cap Screw 3411 x 3" Self-Lock Setscrew 3/8 " x 2" Soc. Hd. Dog Point Grease Hose 3/16 " I.D. x 12"• Cut Washer 3/8 " Rubber Grommet Pipe Couplin g Vs " Lube Fitting 1/8 "-90° Spherical Bearin g Retainer — Labyrinth Cap Screw 1/2 " x 11/2 " Self-Lock Lock Washer '/2 " Roll Shaft with Weights Hy draulic Motor — Vibrator Drive (See Sep. Illus.)

Cap Screw V," x 1'/2 " Self-Lock Lock Washer 1/2 " Snap Rin g — Couplin g Size #2 Mill Motor Hub-Lovejo y Inc., Chica go, Ill. Seal — Couplin g Couplin g Half — Exciter Drive Couplin g Sleeve — Exciter Drive Locknut 7/8"-14 Cut Washer 74," Couplin g Half — Driven Woodruff Key 3/8 " x 114" #E-1210

No. Req 'd.

1 1 8 3 1 2 1 1 1 1 1 8 8 1 1 8 8 1 1 1 1 1 1 1 1

2.

(D

mI I

rn

Used Previous to HX202

(D

0

VIBRATION AMPLITUDE INDICATOR

0,

z a

.

cD

I. O"'

0

•V •6 •11NI G3 1Nl ael

Q.

0 I

0

Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14

502-4577-80 298-218-2 102-8522-1 502-4695-80 102-8520-1 298-286-2 298-8521-34 502-2931-80 502-2930-80 102-8521-1 402-1728-2

15 16 17 18 19 20 21 22 23

- 298-6018-34 102-8728-1 - - - - 202073 298-2034-71 298-2014-71 102-8521-2

Description Bracket — Link Rod End '4" Threaded Rod Mounting Frame Shaft Ball Bearing Retaining Ring Core Stack — Stationary Core Stack — Oscillating Shim .005" Oscillating Frame Cap Screw 1/4" x 1. 3/4"`w/ Locknut Cap Screw 1/4" x 3/4 " w/ Cap Screw 5/8 " x 2" w/C.W., Jam Nut Cap Screw 5/,," x 1 1/4" w/Lock Nut Roll Pin 3/,,," x 11/2" Transformer — Resonator Cotter Pin '/8 " x 1 1/2" Spacer Locknut 14" Locknut 5/8 " Shim .050" Jam Nut % " S.A. E.

No. Req'd.

1 2 1 1 1 2 2 1 1 36 1 7 4 2 3 1 1 1 5 11 2 2 2

V •S •fl NI C131 NIticl

in 0

in

PI

0

ri

CD

0

Eff. Ser. No. HX-202

a AMPLITUDE INDICATOR AND TRANSDUCER

Item No.

Part Number

1 2 3 4 5

502-4577-80 298-218-2 102-8522-1

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

602-3145-1 502-4695-80 402-1728-2 102-8520-1 298-286-2 298-8521-34 298-6018-34 502-2931-80 102-8728-1 502-2930-80 102-8521-1 102-8521-2

ti

Description Bracket — Link Rod End 5/8 " Threaded Rod 5/8 " S.A.E. Jam Nut 5/8 " S.A.E. Transducer Assembly — Items 6 thru 21, Inclusive Mounting Frame Oscillating Frame Shaft Ball Bearing — Sealed Retaining Ring Roll Pin 34 6 " x 1 1/2 " Core Stack — Stationary Cap Screw 1/4" x 11/4" w/Locknut Transformer — Resonator Cotter Pin Vs " x 1 14" Core Stack — Oscillating Shim .005" Cap Screw 1/4" x 4" Shim .050" Cap Screw 54" x 2" w/C.W. & Locknut Cap Screw 54 6 " x 11/4" w/Locknut

No. Req'd.

1 2 1 2

.S. at

1 1 1 3 2 2 1 1 3 1 1 1 36 4 2 2 3

Eff. Ser. No. HX-202 CYN

Cv 00

Always Give Serial Number of Machine

463- 29

HYDRAULIC PUMP — VIBRATOR SUNDSTRAND MODEL NO. HT22-2080 REX Part No. 102-8704-1

Item No.

Part Number

1 2 3 4

102-4365-4 102-4365-6 102-4365-8 102-4365-11 102-4365-12 102-4365-1 *9210247 *9210248 *9220242 *9004102 *9004100-2340 102-4365-47 102-4365-52 102-4365-48 102-4365-49 102-4365-50 102-4365-51

5

6 7 8 9 10 11 12 13 14 15 16 17 18 19

102-4365-46

Description Control Valve (*9800893) Control Valve Gasket (*9800138) Charge Pump Charge Pump Gasket (*9220327) Check Valve (*9800648) Seal Kit — Consists of Items 7 thru 11 Shaft Seal Housing Seal Retainer Seal Spring "0" Ring "0" Ring Retaining Ring (*9006320-0025) Charge Pump Rel. Valve Poppet (*9800597) Cotter Pin (*90046-0607) Pin (*9220441) Washer (*9009610-2850) "0" Ring (*9004101-0140) Special Control Valve (*980-1303-1) Control Shaft Handle

No. Req'd.

1 1 1 1 1 1 1 1 6 2

1 2

1 1 1 1 3

1 1

* Sundstrand Part Numbers.

Pt=l

if Specify Quantity, Part Number and Description When Ordering

REX CHAINEIELT INC. PRINTED IN u.s A.

4:1

rn

'V •S •11 NI 03 1 NI tAd

x

0

k co

w )411 1/2 XI X2

0

K

o

0

oc

cD

4,

cp

ti.

z

z

11

0

10

CONTROL BOX — VIBRATION METER REX Part No. 602-3074

6 R CCni

.4.

WH/

8 /ICI( RED 14/H/TEN

e

Item No.

BZ /lc.< RFD GRELL- Al

9

a

.

8 O

cD

z 0

cD

prf m

7 13 6

H/ X/1 1-1 4 X2 6 7 8

4 12 1—

8 —3 2

5 13

2

1 2 3 4 5 6 7 8 9 10 11 12 13

Part Number

Description

102-3887-1 Control Box 298-16182-17 Rheostat 298-26048-17 Shaft Lock 298-24053-17 Choke 298-24036-17 Rectifier 298-26071-17 Terminal Block End 298-26070-17 Terminal Block 102-3888-1 Bracket 298-11-17 Cord Grip 398-99005-52 Wire #18-4 x 36" 398-99005-52 Wire #18-4 x 144" 102-8528-1 Panel Screw Rd. Hd. 6-32 x

1/2"

No. Req'd.

1 1 1 1 1 2 8 1 2 1 1 1 4

tD

Always Give Serial Number of Machine

OPERATOR 'SCON SOLE & CON TROL S

463-31

Art

■v; E

REX CHAINBELT INC

Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S.A.

OPERATOR'S CONSOLE & CONTROLS THROTTLE, DIRECTION, EXCITER, PULL TO STOP, IGNITION & STARTER Item No.

Part Number

1 2

0

3 4 5 6 7 8 9 10

102-3736 -1 102-37377) 102-3845-1 102-4375-1

11 12

298-2067-56 298-2066-56

G.

tp

13 14 15

502-2977-80 { 102-3937-1

16

tp

0 tit/

m

17

102-8642-1

18

102-8672-1

19

102-7253-1

20 21 22

X202821 502-2754-80 102-8705-1

23

502-4625-80

Description

No. Req'd.

Item No.

Operator's Console Cover, Amplitude Ga. Cap Screw %" x 1" w/C.W.. L.W. & Nut Cover, Instruments Cover, Instruments Cover, Brake Master Cylinder Instruction Plate - Operation of Machine Instruction Plate - "Towing" Instruction Plate - "Lubrication" Instruction Plate - "Clearances" Instrument Cluster — Includes Items 11 thru 14 Assembled Ammeter Gauge - Stewart Warner #440436 Temperature Gauge - Stewart Warner #442784 Water Temperature Sending Unit Stewart Warner Corp. #362AJ Reducing Bushing Oil Pressure Sending Unit - Stewart Warner #353Z Oil Gauge - Stewart Warner #444642 Fuel Gauge - Stewart Warner #441343 Mounting Flange - Throttle & Direction Con. Machine Screw Flat Head 1/4 " x 1" Control - Throttle & Direction - Morse #E63144 (See Separate Illustration) Machine Screw Flat Head 1/4" x t/2 " Control Cable - Throttle, 156" lg.

Morse Series 30M #D44194 Control Cable - Forward -Reverse Morse Series 40 #43C-180 Cable Brake for Throttle Cable & Direction - Morse #44386 Ball Joint 1/4 -28 Lever - Hydrostatic Pump Control Hydrostatic Pump - Traction Drive

1 1

24 25 26 27 28 29

502-2980-80 298-157-47 298-158-47

30 31 32

102-3302-4 102-7957-1 298-9032-86 298-6068-17

(See Separate Illustration) Bracket - Throttle Cable

9

1 1 1 1 1 1 2

1 1

33

1

34

1 1 1 1 1 1 6

36 37 38

1

1

44

3 2 1

1 1

298-146-47

203027-1 298-6067-17 102-7958-1 298-156-47

35

39 40 41 42 43

1 4

Part Number

45 46 47 48 49 50 51

{ 502-4460-80

1

102-8109-1 102-8109-12 102-1991-1 502-2791-80 298-80-47 102-1596-2

1 102-1891-1 298-5017-92 298-2131-62 298-5018-92 298-5019-92 502-2965-80

Description

No. Req'.d.

Control Arm - Governor Bracket - Cable Clamp Cable Clamp Machine Screw Rd. Hd. 10-24 x 3/4" Cable Clamp - Throttle Cable Machine Screw Rd. Hd. 10-24 x 518 " Morse #A31804 Flexible Shaft - Tachometer Cable - Pull to Stop Cable Clamp Ignition Lock Switch (Cole Hersee Co. #95522A) Wire - Ignition Switch to Ampere Gauge Starter - Push Button (Cole Hersee Co. #9216) Conduit Clamp (Not Illustrated) Cable - Exciter Control (Morse #43C, 8 ft. lg.)

Bracket - Brake Master Cyl. Cap Screw %" x 1" w/L.W. & Nut Brake Master Cylinder (Wagner #FE3086) Repair Kit for Master Cylinder (Wagner #F11301) Yoke End - Brake Cylinder Nut %," U.N.F. Brake Lever Cut Washer Pin - Brake Lever Cotter Pin 1/8 " x 2" Pad - Brake Pedal Pin - Brake Pedal Cotter Pin Spring Set Screw 5/16 " x 2" w/Nut Gasket - Hyd. Brake Line Connector - Brake Cylinder Gasket - Brake Line Bolt - Brake Line Brake Lock

1 2 2 8 1 2

1 1 1 1

3

1 1 1 1 4

1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

aurrpelq lo Jag= N Min anro sAehtly

031N1 .<1 V •S •11 NI

m 0

4-

rn

OPERATOR'S CONSOLE & CONTROLS THROTTLE, DIRECTION, EXCITER, PULL TO STOP, IGNITION & STARTER

SpecifyQ ua nti ty, Part Numberand Description WhenOrdering

52 53 54 55

C. 3 1 Ntbd

102-8743-1 102-1282-1 402-1540-1

1

402-1540-2 102-8516-1

102-8744-1 56 X202617 298-52-17 298-11-17 298-86-17 102-8719-1 57 - 298-6123-17 298-52-17 58 —602-3074

Description Cap Screw 34" x 2'4" w/Lock Nut Frequency Meter (See Wiring Diagram) Plate — Model & Ser. No. REX Nameplate w/Studs Nut 5/1 ," w/Lock Washer REX Nameplate w/Tapped Holes Bolt — Flat Head Tachometer, Vibration Meter — A.P.I. Instruments Co. — Chesterland, Ohio #355 Label V.P.M. Switch Boot for Switch Cord Grip 1/2 " Solderless Connectors Plate — Spray Control Toggle Switch Seal for Toggle Switch Vib. Meter Control Box (See Sep. Illus.)

No. Req'd.

1 1 1 4 6 2 4

1 1 1 1 1 2

1 1 1 1

MISCELLANEOUS PARTS — Not Illus.

70

298-212-6.2„ 502-2306-83

75

298-2012-71 76 29 - - 7 102-869

in

SnNI

Part Number

Item No.

C.A.)

x 0

2

80 81 82

102102-8699-1 298-263-47

in

in r

2

83 502-205-80 84 102-8975-1

Tee — Brake Line Brake Line 27" lg.

Brake Line 72" lg.

Clip — Brake Line Brake Line 96" lg.

Cap Screw 34," x 2 14" Lock Nut 34" U.N.C. Conduit Clamp Label "Control" Plate "Vibrator Control" Emblem S.M.V. Label "Lubrication" Label "Filter Indicator" Cable End 10-32 U.N.F. Female with 1/4 -28 Male Stud Wire for Frequency Meter Adapter for Tachometer

1 1 1

ar

3

1 1 1

fg)

2

O

n a 5' cp

Always Give Serial Number of Machine

463-34

CONTROLS TWO-SPEED SHIFT & EMERGENCY STOP

REX CHAINBELT INC. PRINTED IN U.S.•

Item No.

Part Number

1

102-7963-1

2

102-7244-15

3 4

502-4456-80 X203049

5 6 7 8 9 10 11 12

102-3669-1 298-241-2 298-8014-4 102-3668-1 298-123-2 298-5075-92 298-2011-71

13

102-7957-1

14

102-8022-1

15 16 17 18 19 20

298-146-47 298-30-47 298-92-47 102-3789-1

Description Control — 2-Speed Shift (Morse #E48996) Control Cable (Morse Series 60, #63B66) Bracket — 2-Speed Support Ball Joint 3/16 "-24 Thread (Tonrek Type "R", #R-108) Lever — 2-Speed Shift Bearing — Flanged Nylon Shoulder Bolt Bracket — 2-Speed Shift Rod End — Female (Spherco #TR6) Rod End — Male (Spherco #FRE-6) Lo cknut % " U . N. F. Cap Screw 3/8 " x l'/2 " w/C.W., L.W. & Nut Cable — Emergency Stop Red "T" Handle 144" lg. (Morse #B48701) Mounting Bracket — Emergency Stop Cable Cable Clamp w/Shim (Morse #A31804) Cable Clamp — Jiffy Ether Cup Street Elbow '4" x 90° Cable End Plate — 2-Speed Control

No. Req'd.

1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1

► Specify Quantity, Part Number and Description When Ordering kAP,1 EX

463-35

Always Give Serial Number of Machine

16

16 5 6 -

4 I"

26 27

14 14

15

\\ 29 15

CONTROLS ASSEMBLY REX Part No. 102-3937-1

Specify

Quantity, Part Number and Description When Ordering

REX CHAIN BELT INC. PRINTED IN U.S.A.

Always Give Serial Number of Machine

463-36

CONTROL ASSEMBLY MORSE CONTROLS INC. NO. 411111Mit REX Part No. 102-3937-1 Item No.

P art Nu mber

Description

1 Knob Actuator Assembly 2 3 Position Strip Gate Plate 4 Thumb Screw '4"-20 x 1,;" 5 6 Hex Nut V-20 Housing 7 Machine Screw V,"-20 x 1/2 " 8 Spacer — Short 9 Cable Terminal — C40 10 , Spacer — Long 11 12 °"' — _- - Lock Washer 1/4 " Shaft — 2 Lever 13 14 Cable Clamp 15 Shim — 40 Series Adjustable Lever Stop 16 17 Spacer — Housing Slug 18 Detent Spring 19 20 Ball 34" Stainless Steel Decal — Morse 21 , Machine Screw #10-24 x 14" 22 I Lock Washer #10 23 Clevis Pin 24 25 Cotter Pin 3/32 " x '/2 " Cable Hanger Assembly (L.H.) 26 Cable Hanger Assembly (R.H.) 27 28 Flat Hd. Screw #10-24 x 54" 29 Hex Nut #10-24 30 Lubricant — A32289

No. Req'd.

2 2 1 1 4 4 2 6 2 2 1 2 1 2 1 2 2 1 2 2 2 4 8 2 2 1 1 4 4 AR

* Morse Controls Inc., Hudson, Ohio Part Numbers Lube at Assembly with Item 30

REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

NEX

463-37

IN

13

Always Give Serial Number of Machine

rfgrra ii, OUT le lei lb 11

4 15 10 16

POWER STEERING HYDRAULIC SYSTEM REX Part No. 102-8077-1 Item No.

Part Number

Description

No. Req'd.

1 102-3701-1 Hose Assembly V," x 75" lg.

1 2 102-3701-2 Hose Assembly '/2 " x 88V," lg.

1 3 102-3701-3 Hose Assembly l/2 " x 130" lg.

1 4 102-3701-4 Hose Assembly '/2 " x 102" lg.

1 5 102-7033-5 Hose V." I.D. x 24" lg.

1 6 298-8018-86 Hose Adaptor ('/2 " MNPT) 1 7 298-9018-86 Hose Clamp 1 8 - - - - Pipe Coupling '/2 " 1 9 298-8112-86 Elbow 45° ( 1/2 " MNPT - 3/4"-16 Str.) 1 10 298-2171-62 Elbow 90° ( 1/2 " MNPT - 3/4 "-16 Str.) 1 11 Str. Adaptor ( 3/4 11-16 "0" Ring - JIC) 298-8110-86 4 12 298-8111-86 Elbow 90° ( 3/q "-16 "0" Ring - JIC) 1 13 10278071J Orbitrol Steering -Unit1 14 *101;7949-1 -----7Piiinp -,-Steering-(See separate illust.)

1 1 * 02:6035-80 Hydraulic Tank (See separate illust.)

1 *102-3725 Hydraulic Cylinder -(See separate illust.) 1 17 102-7505-1 Ball Stud I 2

1.-

3oala-ty •

".1 'y EX ". Specify Quantity, Part Number and Description When Ordering

REX

CHAINBELT INC

PRINTED IN u 5. 4

Always Give Serial Number of Machine

463-38

HYDRAULIC PUMP — STEERING VICKERS PART NUMBER VTM42-60-75-15-MD-R1-12 REX PART NUMBER 102-7949-1 Item No.

Part Number

Description

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

102-7949-10 102-7949-11 102-7949-12 102-7949-13 102-7949-14 102-7949-15 102-7949-16 102-7949-17 102-7949-18 102-7949-19 102-7949-20 102-7949-21 102-7949-22 102-7949-23 102-7949-24 102-7949-25 102-7949-26 102-7949-27 102-7949-28 102-7949-29 102-7949-30 102-7949-31 102-7949-32 102-7949-33

Manifold Sub-Assembly (*281409) Cover Sub-Assembly (*286613) Control Valve Sub-Assembly (*232797) Ring (*296599) Body Sub-Assembly (*296601) Shaft (*250455) Washer (*28931) Screw (*199144) Pin (*32559) Screw (*171523) Spring (*170072) Plug (*175049) Spring (*245507) Pressure Plate (*276396) Pin (*154364) Vane Kit (*922594) (10 pcs.)

Rotor (*213859) Cartridge Kit (*923092) Bearing (*222440) Snap Ring (*106641) Bearing (*148423) Key (*1606) Snap Ring (*172376) Seal Kit (*922904)

No. Req'd.

1 1

1 1 1 1 1

3 1 4 1

1 1 1

2

1 1

1

1

1

1 1 1

*Vickers Incorporated — P.O. Box 302 — Troy, Michigan 48084 part numbers.

REX CHIAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When OrderingLiti=x "

"ILEX 0:

'

—

,

a,

5

lore(a

p

ieit,

9

--

17

(

as -

10

13 , =p rep, . ,

-ar(

re 4

If

r

— ,.... _____ T 19

j

I I

% %. t ' -.. lir ---_____ _ 1I -0-61c• Au. '•-•••• -----. ., „.......... iitivy 1 -----•

1*6 ■--...............

20I

Ifli

0 ,, 7, 7 "--, t, (a, ,„ . . . „ ., , 1 filli I ------' 1"1 -7(go.-- ietrib- -",,

.------(III' la (

Specify Quantity, Part Number and Description When Ordering POW ER S TEER IN G C ONTR OLUN IT CHA R- LY NN C O.. "ORB ITR OL "M ODE L SC B- U M- 11 REXPARTN O. 1 02- 8077- 1

0

es----.

f%

18 -----___ V . (to f 1 6 16 .6e a ..7.- — ,,„, —_ ,i7,7, • °. . _ 6 lac 6( 7 ,( , —__ --_.

L

r-- -------- 14-Ir

(int war 8 , 7

) rii"f/ 1 /4-

Il%4, 6

, 70,1flutO

f.,, •

-

0 41.

ii

k ,% -4,

2 1 3 4

4b3-39

Always Give Serial Number of Machine

REX CHAIN BELT INC

PRINTED IN U.S.A.

,

0

m

POWER STEERING CONTROL UNIT CHAR-LYNN CO. "ORBITROL" MODEL SCB-UM-1 1 REX PART NO. 102-8077-1

z()

cb

0

z

a

.

cp

8

cp

z

0 ti

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16( 17 18 19 20

Part Number

_ _ _ - _ 102-8077-21 102-8077-22 102-8077-23 102-8077-24

102-8077-25 102-8077-10 102-8077-11 102-8077-12 102-8077-13 102-8077-14 102-8077-15 102-8077-16

Description Not Used Not Used Not Used Not Used Snap Ring (*14092) Retaining Ring (*5245) Bearing Assembly (*21146) Not Used Steering Shaft Assembly (*5249-1) Not Used Not Used Tube and Flange Assembly (*5246-1) Cap Screw 34" - 16 x 3/4" Drive (*839) Spacer (*20642) Plate (*594) Gerotor Set (1.50 thick) (*612) End Cap (*21176) Control Parts Assembly (*847-2) Seal Kit

*Char-Lynn Company — 15151 Highway 5 — Eden Prairie, Minnesota part numbers.

No. Req'd.

2 1 1 1 1 2 1 1 1 1 1 1

1

AlwaysGiveSerial Numberof Machine

in

no.Ex. -- -- -

, . •,

.--

..

4.

1

-

.... e

. .

)

. 0

1

230..

_

1

_ --

21 1,-,

. __ _ _------

P

ili•li

IA.'.

.... .......

1. sl......y ...

. .,

-

Specify Quantity, Part Number and Description When Ordering

PRINTED IN

ARTICUL ATIN G JOIN T& S TEERIN GCYLINDER'.

e:'

•

__,---- , , _ _ - --14 r---5 I 25 16 ---"b20 AN 17 Il ,- - .)r -i 711 *' 5,- . -7 ,„....

9 ift-1 16 ,,, , Lt s, ,)0 26 1 51 2 rfr Used Previou s to HX- 202.

19 24

c::-•

2: r°

_, n . __

00,0 0--

r ,,....„..

-,--Il---

,,, . .

26

Ivo_ -

.

ek- 1

_.. . .

,.._......_ - -• - r A IN

1,---' .

, --- -

. • ..•

... . .

../.......j -4:11•-3

..._-

10

(6

4 5 C---- - Li iLio llillil'r °1• 3 .c 7 c,_i '--6/ 2 , ,,--_,,4 0---------I6 t. ,, 3' -6:: '-- - -----.::. g0 -2 .00 #.- -, ..0 .,;# ;:..1 .'1 . ..:0: Iq . 1 --',"•••': 71

1i

463-41

Always Give Serial Number of Machine

REX CHAINSELT INC.

STEERING CYLINDER

ARTICULATING JOINT Item No.

Part Number

4 5 6

3

502-4395-80 102-8706-1 102-7924-1 { 102-7924-2 298-6805-8 102-7919-1 #1610

7

{ 298-2010-71

8

502-4396-80

9

I-i 298-2016-71

1 2

10 11

502-7087-80

{ 502-7087-81 102-4517-1

P art Number

Description

No. Req'd.

Item No.

Cross Shaft Bearing Spacer Shim 14 6 " (As Needed) Shim 1/32 " (As Needed) Self-Aligning Bushing (R.B.C. #B32-L) Bearing Cover Lubrication Fitting V Cap Screw 1/7 "' x 1 1/2" w/L.W. Lock Nut '/2" Cap Screw 1/2" x 2 1/2" w/L.W. Bracket — Bearing Housing k.-HN.uTt.3/4C"ap Screw %" x 5" FI LOCc Frame for Roll (Reference only) Straight Frame for Roll (Ref. only) Scraper for Frame Roll

1 4 8 4 4 4 4 16 12 12 1 8 8 1 1 2

12

102-3725-1

13 14 15 16 17 18 19 20 21 22 23 24 25 26

102-3725-2 102-3725-3 102-3725-4 102-3725-5 102-3725-6 102-3725-7 102-3725-8 102-3725-9 *102-3725-10 102-3725-11 102-3725-12 102-3725-13 102-3725-14 102-7505-1

Description Hydraulic Cylinder — Steering (Consists of Items 13 thru 25) Nut (Cross Mfg. #1A0146) Head Cap (Cross Mfg. #1C1528) Head (Cross Mfg. #1C1648) Piston (Cross Mfg. #1C0005) Rod (Cross Mfg. #1C9679) Tube Assembly (Cross Mfg. #1C9678) Retaining Ring (Cross Mfg. #1A0004) Cap Screw (Cross Mfg. #1A0300) Seal, T-Ring (Cross Mfg. #1A0315) "0" Ring (Cross Mfg. #1A0003) Seal, T-Ring (Cross Mfg. #1A0314) Seal, Wiper (Cross Mfg. #1A0019) "0" Ring (Cross Mfg. #1A0051) Ball Stud 1 14" - 12 U.N.F. Internal Thread (Vickers #922945)

No. Req'd.

1 1 1 1 1 1 1 1 3 1 1 1 1 1

Always Give Serial Numberof Machine

Used Previous to HX-202.

2

For Service Part No. 102-3725-12 will be replaced by — 102-3725-15 "0" Ring (Cross 1A0020) 102-3725-16 Backup (Cross 1A0147)

rn C.1/4)

411E X Specify Quantity, Part Number and Description When Ordering

N.

0,0

--%i10 /

\

,

\

..-------' .ag

)

r)

,,

)

\

\. ,-- --

AR TICU LA TING C R OS SAS SE MB LY

E ffec t ive Ser. No. H X202

,

•

v,,

.

2 3

a

//

. .

/

,

8 -10

7

_..-..

' ('‘_

.

0

Wi, 10

t1

v (-- 111,°'

,

1 4 10 9 .

, '10 4 5 6l

,

„3 2 ik

0

2

l----.___3

1 1 „...• •

N3

_- - -_ ,, 7111 .._c--------"---v _

■

-

i/ gm

/ 1 --.. , / 1 / 1 ■

•

0 go ,

'

8

10

4 Iiiii iI;1111r C:=>) II

.., ei tit

- ..... _, .

\) t (m) ) 10 . t ,1 1 ,y mot , t 0 '„` w \ .

15

8

\'N.ss

%

.

Al000.

12

‘11111111111

13

c)

463-43

Always Give Serial Number of Machine

REX CHAINEELT INC

PRINTED IN U. 5.4

.• 'S •r1 Ni 031 NI tid

I

Effective Ser. No. HX202 cb

0

O

ARTICULATING CROSS ASSEMBLY

Item No.

Part Number

1 2 3 4 5 6 7 8 9

402-2616-2 298-10027-2 298-10028-2 102-8757-3 102-8757-2 102-8757-1 102-3977-1 102-3978-1

10 11 12 13 14 15 16

102-8757-4 502-4676-80 502-7087-80 502-7103-80 298-2016-71

Description Articulatin g Cross Inner Bearin g Rin g Outer Bearin g Rin g Shim, .050" Shim, .010" Shim, .005" Sleeve — Bearin g Bearin g Retainer Cap Screw '/2"-13 x 2" H.C. — H.T. w/L.W. Lube Fittin g 143 " N.P.T. #1610 Shim, .125" Bracket — Bearin g Housin g Roll Frame Main Frame Cap Screw 3/4 " x 5" H.C. — H.T. w/L.W. Lock Nut 1/4"

No. Re q 'd.

1 4 4 4 8 2 4 4

Always Give Serial Numberof Machine

0

24 4 2 1 1 1 8 8

0 a. cp ti

utl

m

rn CA)

36

21 222

6?>2

28

21 25 6), 15 11 12 23 26 7,• 2

"V •S •11NI 031 P41 1:1e1

Used Previous to HX-202 z

12

C19 28

O

z

WATER SPRAY SYSTEM FOR ASPHALT OPTION

12 15

Arr;

16 17

12

18

7

0; 1 RI 31 ir\35

34

17 19 36 21)

1 0

32, U-35

•Y•S •r1NI 031 NI Nd

m 0

m 0

Used Previous to HX-202 WATER SPRAY SYSTEM FOR ASPHALT OPTION

a,

Part Number

1

502-6192-80 - - - 102-3990-1

2 fL

3 4 5 6 7

a

.

0

a.as

m

X-551-B X-551-C F 102-8325-1 9 _ 10 298-151-53 11 12 13 14 15 16 17 18

102-8224-8 298-8121-86 298-6510-68 298-9048-86 102-6440-1

Item No.

1 6 2 28 4 4 1 1 1 1

19 20

1 1 1 1 1 1 1 1 9 1 1 1 10 1 3 1

21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Part Number 298-46-98 102-3966-1 102-6438-1 102-8224-3 102-8718-1 102-3967-1 102-8224-2 298-1000-4 - 502-8021-80 502-4659-80

F

37 38 39 40 41

-

102-3329-1 _ 102-8224-5

-

Descripon ti

Reducing Bushing '4" to 34" Solenoid Valve — 12 volt, '4" N.P.T. Automatic Switch Co. #Asco 8210B94 Front Spray Bar Pipe Tee 3/4 " Galvanized Pipe Cap 34" Galvanized Spray Nozzle Nipple 3/4 " x 2 34" T.B.E. Galvanized Reducing Ell, 3/4 " to 3/" Galvanized Hose '4" I.D. x 65" long Street Ell 3/ " Bracket for Tee Tee '4" x 34" x 34" Galvanized Spray Bar (Rear) 34," Pipe Cap 34" Galvanized Reducing Coupling 34" to '%," Hose 54" I.D. x 38" long U-Bolt w/Nut & L.W. Support — Spray Bar (Rear) Carriage Bolt w/Lock Nut Cover for Spray Bar Cap Screw 3/8 " x 3/" w/Lock Nut REX Nameplate Cap Screw 14" x 1/2 " w/L.W. Hose '4" I.D. x 74" long Pipe Plug 2" Rubber Grommet Cap — Water Tank

No. Req'd.

lOd" 00 ■C. ■-•4

O

8 - X-551-A

Water Tank Cap Screw 54 " x 2" w/Lock Nut Cover for Tank Cap Screw 34" x 1" w/Copper C.W. Gasket — Cover Gasket — Cover Guard — Tube Extension Fitting for Tube Rubber Grommet Glass Tube — Gauge Brass Gauge Cock for '4" Dia. Tube, w/Petcock for drain Rubber Washer Brass Washer Composition Handle w/Mtg. Screw Rubber Insulator for Guard Reducer Bushing 74," x '/2 " Filter — Sump Strainer, 60 mesh Monel — Jelliff Corp. #J-10-170-60-1" NPTF Reducing Ell, 1" x 34" Galvanized Nipple 3/" x 1'4" T.O.E. Galvanized Hose % " I.D. x 4" long Hose Coupling w/Washer Filter for Coupling Hose Clamp Pump — Jabsco (See Sep. Illus.)

Close Nipple 3i."

Pipe Tee 34" Galvanized

No. Req'd.

C■1 NNN

A

102-4643-1 102-4643-2 102-3965-1 502-2766-80 X8063 102-8792-1 —X-551

j Description

•zr (NIN (NIoov-4 1-1N v—I

0

Item No.

28

SAWA 18111V

as

m

41

X

1

19

23

5 ,hr. 11

2•N 17

20 \ 191 22

17

14 6-15 5-16

19

21 37 19 38 39

19» 14 17

x 2

4 17

Eff. Ser. No. HX-202, up.

-ri 0

18 177e

30

22

♦ 'Sn Ni 031 Nl eld

19

\ 29 36

33

32

WATER SYSTEM FOR ASPHALT OPTION

38 39

Always GiveSerial Numberof Machine

SpecifyQ uanti ty, Part Numberand Descri ption WhenOrdering

17

'Y •c •fl NI 031 NI Ud

A

m

m ■

cm

ri

cp

0

ti

Eff. Ser. No. HX-202, up.

WATER SYSTEM FOR ASPHALT OPTION ti

Item No.

0 a,

Part Number 502-6221-80

1

a,

ti

2 3 4 5 6 7

a,

8 9 10 11 12

sr

13 14 15 16

ct rk

X

- - - - 102-3990-1 102-4643-1 102-4643-2 102-3965-1 502-2766-80 102-8792-1 ^ X-551 - X-551-A X-551-B _ X-551-C 102-8325-1 X-8063 298-158-53

Description Water Tank — 2 Compartment, L.H. side — 50 gal., R.H. side — 100 gal. capacity Cap Screw 54" x 2" w/Locknut Cover Gasket — Vertical Gasket — Horizontal Guard — Glass Extension Fitting — Tube Glass Tube Brass Gauge Cock for 54" Dia. Tube w/Petcock for Drain Rubber Washer Brass Washer Handle w/Mounting Screw Isolator — Tube Rubber Grommet Pipe Coupling 1/2 " Filter #200 Mesh Monel C.O. Jelliff Mfg. Co. W0-170-200-1" N.P.T.F. Reducing Bushing 1" x S" Galv.

Pipe Tee s" Pipe Nipple 34" x 2" T.B.E. Pipe Cap 3/8 "

No. Req'd.

1 6 2 4 4 2 2 2 2 2 2 2 4 2 2 2 2 3 2 2

Item No. 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Part Number 102-8224-14 298-9048-86 298-8121-86 102-6440-1 102-8899-1 102-8224-3

102-3966-1 102-6438-1 102-8224-5 102-8718-1 102-8224-2 102-3967-1

Description Pipe Nipple 3/3 " x 1 1/;" T.O.E. Hose 58" x 2" Hose Clamp Coupling w/Washer Pump — Jabsco (See Sep. Illus.)

V-Belt for Pump Hose, 5 8" I.D. x 65" Reducing Ell 3/4 " to 3 8 " Pipe Nipple 3/4 " x 2 3 4" T.B.E. Galv.

Pipe Tee 3/,," Front Spray Bar 34" Pipe Cap 3:," Nozzle — Spray Bar Street Ell 3/8 " Hose S" I.D. x 74" Bracket for Tee Hose S" I.D. x 38" Reducing Coupling 3 4" x S" Spray Bar — Tires Pipe Cap 3/ U-Bolt Support for Spray Bar Carriage Bolt S" x 1" w/Locknut Filler Cap — Tank Spray Bar Hood (See Sep. Illus.)

4 "

298-1000-4 502-8021-80 502-2799-80 502-4661-80

No. Req'd, 9 2 12 2 2 4 1 2 1 1 2 2 18 2 1 1 2 2 2 2 6 4 8 2 1

0

5' cp

i9

Always Give Serial Number of Machine

WIPER MATS FOR ROLL AND SPRAY BAR Item No.

Part Number

Description

No. Req'd.

1 2 3 4

502-6192-80 102-8725-1

Water Tank Spray Pipe 34" x 40 14" Galvanized Pipe Cap 34" Pipe Tee 3/4 " x 34" x 1/4" Hanger — Spray Bar Cap Screw 1/4" x 1" H.C. — H.T. .

U-Bolt w/L.W. & Nut Cap Screw 3/8 " x 1/3 " w/L.W. & Locknut Hood with Brackets REX Nameplate Cap Screw 1/4" x 14" w/L.W. Washer ' 7/32 " I.D. Hood Latch Cotter Pin '4," x 1" Latch Bracket Cap Screw 1/2 " x 1" w/L.W. & Nut Pin Mat Frame — Wiper Cocoa Mat Hog Ring (Use as Req'd.)

1 2 2 1 4 8 4 6 1 1 2 4 1 7 2 4 5 1 2 42

5

{102-8724-1

6

298-1000-4

8

502-4661-80 f102-3329-1

7

9 10 11 12 13 14 15 16 17

298-15-97 102-8723-1 ...[502-206-80 57186 502-4662-80 102-2669-1 298-123-47

thiet ""EX Specify Quantity, Part Number and Description When Ordering

REX CHAINBELT INC RINTE, N L

s

Always Give Serial Number of Machine

463-50

COCOA MATS FOR TIRES — ASPHALT OPTION Item No.

Part Number *502-8021-80

1

-

2 3 4 5

*102-87144 * 102-8713-1 *298-1000-4 1102-8711-1

6 7 8 9 10 11 12

102-8712-1 298-15-97 502-4652-80 102-1458-1 298-123-47

Description

No. Req'd.

Spray Bar Bracket Cap Screw '/2 " x 1" w/L.W. & Nut Spray Pipe 34" — Tires Pipe Cap 3/4 " Hook for Frame U-Bolt Pivot Bracket (R.H. & L.H.) Carriage Bolt 'V x 1 1/4 " w/L.W. & Nut Drilled Rod Washer 17/32 " I.D. Cotter Pin '4," x 1" Frame — Wiper Mat (R.H. & L.H.) Cocoa Mats (R.H. & L.H.) Hog Rings (Use as Req'd.)

4 8 2 2 2 4 2 4.

2 4 4 4 4 48

* These Items are all part of the Water System, but shown here for reference.

REX CNAINSELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering .161EX

10

rn

2

TIRE SCRAPERS

1 (t,

51512 -.. . .)i

1 3 T

-, r-

, .

,

0

1\h,

a,

Item No.

\

•

4

j 3

1

0 °

411111114111110004 ,

----— / 11

6

tr a,

z

2 3 4 5 6 7

RIGHT HAND — FRONT ,

(1,

8 9

cD 0 tO

10

4

i

4

- 502-4737-80 _ 203065 502-4649-80 102-8707-1 102-8678-1 502-8020-80 - - - - 202344 502-4667-81 502-4736-81

-,;CC

-----

502-4650-80

13

RIGHT HAND — REAR

502-4736-80

3

----------,..,..L.i.

502-4667-80

11 12 13

502-4666-81 502-4666-80 298-8009-4

Description Spacer Bracket (Rear) (R.H. & L.H.) otal width at Dimension "A" is 21%" Spacer Bracket (Rear) (R.H. & L.H.) Total width at Dimension "A" is 18'4", used on narrow wheel base.

Cap Screw 3/4" x 1'," w/C.W., L.W. & Nut Compression Spring (R.H. & L.H.) Cut Washer 1" Pivot Bracket (Rear) (R.H. & L.H.) Cotter Pin 3/, 6 " x 11/2" Scraper Blade Scraper Retainer Cap Screw 3/4" x 1 3/4 " w/C.W., L.W. & Nut Spring Hanger Bracket (R.H. & L.H.) Cap Screw 3/4" x 11/2" w/C.W., L.W. & Nut Tension Spring (R.H. & L.H.) Scraper Bracket (Front) (R.H.) As Illus. Total width at Dimension "A" is 17% " Scraper Bracket (Front) (R.H.) As Illus. Total width at Dimension "A" is 14%". Used on narrow wheel base.

Scraper Bracket (Front) (L.H.) Opposite of Illustration. Total width at Dimension "A" is 1754" Scraper Bracket (Front) (L.H.) Opposite of Illustration. Total width at Dimension "A" is 1454". Used on narrow wheel base.

Cap Screw %" x 11/2" w/C.W., L.W. & Nut Pivot Bracket (Front) (R.H.) (As Illus.)

Pivot Bracket (Front) (L.H.) (Oppos.)

Eye Bolt 57, 6 " w/Jam Nut & Lock Nut (R.H. & L.H.) Lube Fitting #1792

No Req'd.

2 2 6 4 8 2 4 4 4

•

1

ii

16 2 18 4 1 1 1

1 8 1 1 2 2

Always GiveSerial Numberof Machine

,0 1) ■ 9 ; / I i / ,7

_

Part Number

Always Give Serial Number of Machine

463-52

10

. WATER PUMP JABSCO — "MINI-PUPPY" #8860 12. VOLT D.C. REX PART NO. 102-6440-1

Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12

102-6440-11 102-6440-12 102-6440-13 102-6440-14 102-6440-15 102-6440-16 102-6440-17 102-6440-18 102-6440-19 102-6440-20 102-6440-21 102-6440-22

Description Screw (*SP1002-09) End Cover — Mod. 8860 (*8865) .

Gasket (*7828) Impeller (*1414-37) Screw — Cam (*SP1002-01) Cam (*8089) Seal (*SP3000-10) Body (*7824) Slinger (*6342) Screw (Body to Motor) (*SP8019-02) Motor — Mod. 8860 (*SP8012-02) Service Kit — Consists of Impeller, Seal, Gasket and 31 End Cover Screws (*8860-SK92)

No. Req'd.

3 1 1 1 1 1 1 1 1 2 1 1

*Part numbers a re Jabsco — Costa Mesa, California part numbers.

REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering 1.7111EX

is White White' >>

Splice Points

Cil

Black

(1)

Black‘" 1 Amp.

0 C

Red

z r.

Ignition Switch Tachometer

au

tr

cD

n. cD

Ca

6.

POSITIVE GROUND SYSTEM

0

WIRING FOR FREQUENCY METER

r.

m.

X

m r

V

Sr1 NI 031 NI tid

kra

2 0

Item No.

Part Number

1 2 3 4 5

102-8743-1 602-34-1 298-103-17 502-205-80 298-86-17

Description Frequency Meter, also shown on Page 33.

Fuse & Holder — 1 Amp Magnetic Pick-up Cord Assy.

Connectors

No. Req'd.

1 1 1 1 4

Always Give Serial Number of Machine

463-54

WIRING DIAGRAM LIGHTING UNIT Item Part No. Number

Description

No. Req'd.

1 298-12015-17 Front Lamp Assy. (GMC #910900) 2 2 298-12014-17 Rear Lamp Assy. (GMC #923-40) 2 3 298-6019-17 Switch — Two Position 1 1 4 502-173-80 Wire Assembly & Fuse 2 5 298-5526-68 Grommet — 1/2" I.D. 6 298-53-17 Wire Nut #74B 2 7 Wire (#12 Gauge — Automotive x 2' 6" long) Black 1 Wire (#12 Gauge — Automotive x 1' 8 long) Black 1 9 Electric Loom 1/4 " I.D. x 2' 2" long 2 10 Electric Loom V4 " I.D. x 10" long 1 11 102-3821-1 Wire Set 1 12 298-26010-17 Terminal Wire 1 13 298-57-47 Clip — Coated (Not Illustrated) 3

REX CMAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

EX

m

SOLENOID REAR

cn

a H.

TO IGNITION SWITCH

0 PUMP

z

SWITCH REAR S.B. SOLENOID FRONT

\

SWITCH FRONT S.B.

RED WHITE GREEN BLACK

a.

WIRING DIAGRAM FOR SPRAY BAR, PUMP & SOLENOID

0

Item No.

Part Number

1

502-8039-80

cep

2

•Y 'S •n NI aa-LNI Ncl

3 I

z

z

4 5

298-86-17 298-12023-17 X8187 298-5546-68 298-12059-17 298-85-17 502-207-80 298-53-17

Description

WIRE SETS

No. Req'd.

Cable 8 ft. long. Has 4 wires w/eyelets on one end — other end plain Connectors Fuse Holder Terminal Wire 14 Ga. Wire 6" long Rubber Sleeve Fuse — 10 Amp Solderless Terminal Jumper Wire

1 3 1 2 1 1 1 1 4

Wire Nut

1

Item No.

Part Number

1

102-3710-1

2

102-3711-1

Description _ --,--7i) 7 — Wire Harness — G.M. 3-53, for Starter Button, Ammeter, Oil Pressure, Temp.

Gauge, Key Switch & Fuel Gauge Wire Set — G.M. 3 Wires, 12 Gauge — Generator to Regulator

No. Req'd.

1 1

Always Give Serial Number of Machine

463-56

OPTIONAL COLD WEATHER START BATTERY MOUNTING AND CABLES REX SELF-PROPELLED VIBRATORY ROLLER

Iteu,

No.

Part Number

1

502-4579-80

2

298-3256-17

4

102-8383-4 102-8383-5 298-3-44

I .

502-2693-80 102-7766-1

3

7

298-2012-71

Description Battery Tray (Please note when this option is used the main frame of roller has been altered per dwg. 602-3072) Battery — Diesel Starting — 12 Volt AABM Group Size — 8D (Delco Model 8DR205, Part No. 761 or Exide, DS-8D7796 or Prestolite Type 8D-A8Y or equal Battery Cable — #00 Ga. x 73" long Battery Cable — #00 Ga. x 30" long Acid — Electrolytic — 45 oz. Bottle (Military Spec. OS-801A) Clamp — Hold Down — Battery Bolt — Hold Down — Battery Wing Nut %" (Can be used) Lock Nut 34" N.C. (Normally used in place of Wing Nut) Cut Washer 34"

No. Req'd.

1

1 1 1 1 1 2 2 2 2

REX CHAINEIEf .T INC. PRINTED IN U S. A.

Specify Quantity, Part Number and Description When Ordering

4110 Ex

463-57

Always Give Serial Number of Machine

STEERING CYLINDER — CROSS 3'' BORE x 20" STROKE Item No.

Part Number 102-03725-01

2 3 4 5 6 7 8 9 10 11 12 13 14 15

102-03400-11 102-03725-03 102-03725-04 102-03725-05 102-03725-06 102-03725-07 102-03725-08 102-03400-24 102-03725-11 102-03725-13 102-03725-14 102-03725-15 102-03725-16 102-03725-17

Description

No. Req'd.

Hydraulic Cylinder (*230200 NWFAA) 1 Nut (*1A0146) 1 1 Head Cap (*1C1528) Head (*1C1648) 1 1 Piston (*2C2624) Rod (*1C9679) 1 Tube Assy. (*1C9678) Ret. Ring (*1A0004) 1 Cap Screw (*1A0300) , 3 "0" Ring (*1A- 003) 2 Seal — Wiper (*1A0019) 1 "0" Ring (*1A0051), 1 1 "0" Ring (*1A0020) Back-up (*1A0147) 1 Seal Back-up (*1A002) 2 Mar. '73

*Part Numbers are Cross Manufacturing, Inc.

at&

ks.gy E

REX CHAINBELT INC

Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S.A.