Rex SP848 Dirt & SP900 Asphalt Vibratory Rollers Parts Book Manual #469 - PDF DOWNLOAD

REPAIR PARTS BOOK BULLETIN 469 Self Propelled VIBRATORY ROLLER (Model SP848 Dirt & SP900 Asphalt) EFFECTIVE SERIAL NO HX267 thru JUNE 1973

INSTRUCTIONS FOR ORDERING PARTS

Order repair parts from your Rexnord distributor. Specify quantity,' part number and name , of part. Do not order by reference number or state quantity wanted in terms of sets or pairs.

Always give serial number of machine. This is very important.

The serial number is stamped on manufacturers' plate which is attached to the frame of machine.

Be particular to give:complete shipping address mentioning town, county, and state. Also give billing instructions and address.

Tell whether to -0ip : ,via ,parcel post, express, air express, or freight.

CONTENTS

BULLETIN NO. 469 Self Propelled

VIBRATORY ROLLER (Model 5P848 Dirt & SP900 Asphalt) EFFECTIVE SERIAL No. HX267 thru JUNE 1973 Description

Page No. 469-

BASIC UNIT 2, 3 4, 5 6

Dirt, Model 848 Asphalt, Model 900 Lights

CONTROLS 7 8 9 11

Operators Console Dual, Exciter and Traction Drive 2-Speed Shift and Emergency Stop Brake

,

POWER UNIT 12, 13

Diesel (GM 3-53)

TRACTION. DRIVE 14 15 17 18, 19 20, 21 22, 23

Hydraulic System Hydraulic Pump (Sundstrand) Hydraulic Motor (Sundstrand) Transmission Case, 2 Speed (Rockwell Standard) Drive Axle (Rockwell Standard) Wheel Ends (Rockwell Standard)

VIBRATOR 24, 25 26 27 28 29 30 31 32

Hydraulic System Hydraulic Pump (Sundstrand) Hydraulic Motor (Commercial) Roll, R.H. Roll, L.H. Amplitude Unit Control Box Articulating Cross

STEERING 33 34 35 36 37

Hydraulic System, Single, Model 848 Dirt Hydraulic System, Dual, Model 900 Asphalt Hydraulic Pump (Vickers) Hydraulic Valve, Orbitrol (Char-Lynn) Hydraulic Cylinder (Cross)

ASPHALT OPTION (Model 900) 38 39 40 41

Water Tank and Piping Water Pump (Jabsco) Tire Scrapers Fuel Oil Wetting System

469-2

BASIC UNIT - DIRT (848)

Always Give Serial Number of Machine

Rex

111

BASIC UNIT - DIRT (848)

Item Part No. Number

Description

No. Req'd.

1 Main Frame 1 Steering Wheel 1 Horn Button Kit 1 Rubber Grommet 1 3 X 298 79-8070009-71 Nut, Steering Wheel 1 5 602-10050-01 Fuel Tank 2 _{.102-07948-01 Spacer, Fuel Tank 4 6 530982 :902902 013 :8381 Strap, Fuel Tank Cotton Webbing '4," x 2" 15 Ft. 1 7 298-02059-56 Sending Unit, Fuel Tank 1 8 298-02511-68 Gasket, Sending Unit 2 9 502-08082-80 Pin, Steering Lock 1 10 502-08081-80 Steering Lock 1 11 298-00131-47 Hair Pin 1 12 298-05010-92 Fuel. Strainer 1 13 298-00278-47 Knob Steering Wheel 1 14 502-06031-80 Platform, Operator 1 15 502-02247-80 Post, Seat Support 1 16 502-04664-80 Support, Seat 1 17 502-02822-80 Plate, Seat Mtg. 1 f102-09100-02 Trim, Quickedge 1 18502-06032-80 Fender, L.H. 1 502-06032-81 Fender, R.H. 1 19 502-08029-80 Seat Support Sleeve 1 20 102-08753-01 Pin 1 21 298-00050-47 Hair Pin 1 22 502-04793-80 Handrail, L.H. Front 1 23 502-04793-81 Handrail, R.H. Front 1 24 502-06033-80 Grille Shroud 1 25 502-04457-80 Grille Removable 1 26 502-06268-80 Shroud, Rad. Pump. Comp.

1 27 502-06037-80 Shell, Front Eng. Tank 28 102-07937-01 Cover, Front Comp. Shell 1 1 29 102-04690-01 Hood, Engine 1 30 T102-04520-01 Panel, Side Eng. Comp.

1 1102-04520-02 Panel, Side Eng. Comp.

31 102-09266-01 Handrail Pipe 1 32 298-17011-86 Socket Tee 2 33 502-07107-80 Frame, Roll 1

1 502-07109-80 2 298-00068-47 102-09148-01

Item No. 34 35 36 37 38 39 40 41 42

Part Number 102-04518-01 102-03655-01 102-03818-01 102-03819-01 102-03820-01 502-05979-80 102-03647-01 502-08165-80 502-08165-81 602-02804-01

502-05995-80 298-0601468 298-06023-68 298-05534-68 44 502-08014-80 45 102-07766-01 46 102-08085-01 43

47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

102-08732-01 102-08733-01 298-03254-17 502-08159-80 X7386 102-.08830-01 502-00223-80 102-30194-01 102-30199-01 102-01282-01 402-01749-01 102-04650-01 102-30193-01 102-08523-01 102-08523-02 502-02799-80 502-06257-80 298-00214-47 502-06265-80 102-09138-01

469-3

,

Description

No. Req'd.

Cover, Roll Shaft 2 Cover, Frame End 2 Bar, Top Scraper 2 2 Bar, Bott:m 2 Scraper, Rubber 1 Roll Cover, Inspection 2 Handrail, R.H. Rear 1 Handrail, L.H. Rear 1 Wheel Tire & Tube Assy., Dirt, incls. the following: 2 Wheel 1 1 Tire 23, V. x 26 1 Tube 23, V. x 26 Plug Valve Hole 1 Clamp, Battery 1 Bolt, Hold down 2 Tape, Safety Walk 4" x 18" Lg. 6 Tape, Reflective 4" x 37 Ft. 1 Tape, Reflective 6" x 37 Ft. 1 Battery, 72 Amp 1 Guide, Roll 2 1 Grease Gun Spray Can, 12 oz. Lime 1 Grease, Tube 1 Ctn. 2 Warning Plate Label, Operating Instr. 1 Serial, Model, Plate 1 Name Plate, Rex 4 Lubrication Plate 1 Label, 2 Speed Control 1 1 Cable, 73" Lg. Cable, 30" Lg. 1 1 Cap, Fuel Tank 1 Cover, Console 1 Seat Floorboard, Console 1 Bracket, Adjusting 2

Always Give Serial Number of Machine

Rex 111

469-4

BASIC UNIT - ASPHALT (900)

Always Gitre Serial Number of Machine

'

Rex

BASIC UNIT - ASPHALT (900)

Item Part No. Number 1 502-07109-80 2 298-00068-47 102-09148-01 3 -4)(7987 298-00009-71 02-10050-01 102-07948-01 T 5 502-02213-81 :: 398-99003-38 6 298-02059-56 7 298-02511-68 8 502-08082-80 9 502-08081-80 10 298-00131-47 11 298-05010-92 12 298-00278-47 13 502-04827-80 14 102-30221-01 15 502-04828-80 16 502-04828-81 102-30261-01 17 502-06300-80 502-06300-81 18 102-09282-01 19 502-06033-80 20 502-04457-80 21 502-06268-80 .502-06037-80 22 1102-07937-01 23 102-04690-01 102-04520-01 24 {102-04520-02 25 102-09266-01 26 298-17011-86

4

1

Description

No. Req'd.

1 Main Frame 1 Steering Wheel 1 Horn Button Kit 1 Rubber Grommet 1 Nut, Steering Wheel 1 Fuel Tank 2 Spacer, Fuel Tank Strap, Fuel Tank 4 Cotton Webbing 34 6 " x 2" 15 Ft. 1 Sending Unit, Fuel Tank 1 Gasket, Sending Unit 2 Pin, Steering Lock 1 Steering Lock 1 Hair Pin Fuel Strainer 1 Knob Steering Wheel 1 Ladder 2 Handrail, Side Rear 2 Handrail, L.H. Front 1 Handrail, R.H. Front 1 Filler Plate, Fender 1 Fender, L.H. 1 Fender, R.H. 1 Seat 2 Grille Shroud 1 Grille Removable 1 Shroud, Rad. Pump. Comp.

1 Shell, Front Eng. Tank 1 Cover, Front Comp. Shell 1 Hood, Engine 1 Panel, Side Eng. Comp.

1 Panel, Side Eng. Comp.

1 Handrail Pipe 1 Socket Tee 2

Item Part No. Number 27 502-07107-80 28 102-04518-01 29 102-03655-01 30 102-03818-01 31 102-03819-01 32 102-03820-01 33 502-05979-80 34 102-03647-01 602-10368-01 35

298-06055-68 502-04734-80 298-06056-68 36 —102-08085-01 37 102-08732-01 38 102-08733-01 39 298-03254-17 40 X7386 41 102-08830-01 42 502-00223-80 43 102-30194-01 44 102-30199-01 45 102-01282-01 46 402-01749-01 47 102-04650-01 48 102-30193-01 49 502-08159-80 50 102-09288-01 51 502-08177-80 52 502-08180-80 53 502-08180-81 54 502-04829-80 55 502-02799-80 56 502-06315-80

469-5

No. Req'd.

Description

Frame, Roll 1 Cover, Roll Shaft 2 Cover, Frame End 2 Bar, Top Scraper 2 Bar, Bottom Scraper 2 Scraper, Rubber 2 1 Roll Cover, Inspection 2 Wheel Tire Assy., Smooth, incls. the following: 2 Tire, Smooth 16.9 - 30 1 Wheel 1 Valve 1 Tape, Safety Walk 1 Tape, Reflective 4" x 37 Ft. 1 Tape, Reflective 6" x37 Ft. 1 Battery, 72 Amp. 1 Gun, Grease 1 Spray Can, 12 oz. Lime 1 Grease, Tube 1 Ctn. Warning Plate 1 Label, Operating Instr. 1 Serial, Model, Plate 1 Name Plate, Rex 4 Lubrication Plate 1 Label, 2 Speed Control 1 Guide 2 Box, Battery 1 Strap, Box 1 Cable, 132" Lg. Positive 1 Cable, 132" Lg. Negative 1 Cover, Console 1 Cap, Fuel Tank 1 Tire, Steel 1

Always Give Serial Number of Machine

Rex

111

469-6

LIGHTS mow

Item Part No. Number 1 298-12015-17 2 298-12014-17 298-06123-17 1298-00052-17 4 502-00173-80 5 - 298-05526-68 6 298-00053-17 7 398-04000-39 8 398-04000-39 9 398-95002-94 10 398-95002-94 11 102-03821-01 12 298-26010-17 13 298-00057-47 14 298-13162-17 15 502-08191-80

3

Description Front Lamp Assy. (GM #910900) Rear Lamp Assy. (GM #923-40) Switch, Two Position Seal, Switch Wire Assy. & Fuse Grommet, 1/2" I.D. Wire Nut #74B Wire, 12 Ga. x 30" Lg. Wire, 12 Ga. x 12" Lg. Electric Loom, '4" x 26" Lg. Electric Loom, '4" x 10" Lg. Wire Set Terminal, Wire Clip, Coated Light Socket Kit (iilds. bulb) Bracket, Light

Always Give Serial Number of Machine

No. Req'd.

2 2 1 1 1 2 2 1 1 2 1 1 1 3 2 2 June '73

Rex

469 - 7

OPERATORS CONSOLE,

15

Item Part No. Number

1 2 3 4

Description

No. Req'd.

502-06260-80 Console, Operators 298-00121-17 Plug Button, 3" 102-04686-01 Floorboard, Console Channel, Rubber X203699 298-06123-17 Switch, Water Spray 298-00052-17 Seal, Switch 5- 602-10238-01 Fuse and Holder, 10 Amp 298-05525-68 Grommet 102-30188-03 Flex. Shaft, Tach. (Mod. 900) 6 [102-30188-02 Flex. Shaft, Tach. (Mod. 848) 102-07957-06 Cable, Pull to Stop 168" (Model 900) 7 02-07957-01 Cable, Pull to Stop 144" (Model 848) 102-08642-01 Cable, Throttle 156" (Model 900) 8102-08642-04 Cable, Throttle 132" (Model 848)

I1

1 1 1

2 3 3 2 2 1 1 1 1 1 1

Item Part No. Number

102-04375-01 102-04375-11 102-04375-12 9- 102-04375-13 102-04375-14 102-04375-15 102-04375-16 102-04375-17 10 298-09032-86 11 298-06068-17 12 298-06067-17 13 298-00274-47 14 1102-08743-01 L602-00034-01 15 102-09149-01 16 102-09149-02 17 102-09149-03 18 102-09149-04 19 102-09149-05 20 298-15018-17 21 102-08516-01 22 298-06019-17

Description

16

No. Req'd.

Instrument Cluster, 1 incls. the following: Ammeter (S.W. #440436) 1 1 Water Temp. (S.W. #442784) Oil Pressure (S.W. #444642) 1 Fuel Gauge (S.W. #441343) 1 1 Tachometer (S.W. #551-LR) Glass (S.W. #411329) 1 Bezel (S.W. #413222) 1 Clamp, Cable 2 1 Switch, Lock (C.H. #95522A) Switch, Start, Push Button (Cole Hersee #9216) 1 Key (Cole Hersee #83357) 1 1 Frequency Meter Fuse and Holder 1 Horn Package Kit, incls. 16 thru 19 1 Horn (Delco #9000513) 1 Nut 1 Bracket 1 Bracket 1 Relay, Horn 1 Vibration Meter, Amplitude 1 Switch, Lights 1 June '73

Always Give Serial Number of Machine

Rex

DUAL CONTROLS — EXCITER & TRACTION DRIVE

469-8

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Part Number 298-00314-02 298-00315-02 298-00032-97 298-05003-08 102-30130-01 502-08107-80 502-08101-80 502-08102-80 102-09089-01 398-20001-02 398-02001-92 298-02012-71 298-00313-02 102-30131-01 502-08106-80 502-08199-80 398-17002-15 298-06004-34 298-00300-47 102-07190-01

Description Bearing, 1 1/4 " Bore Flangette, Bearing Mtg. Thrust Washer Bushing Shaft, Dual Control Lever, Direction Cable Tube, R.H. Control Tube, L.H. Control Spacer, Tube Cut Washer %" SAE Cap Screw 3/8 " .x 3" Lock Nut 'V NC Bearing, Pillow Block Bracket, Bearing Lever, Vibration Control Lever, Direction Control Nylok Soc. Set Scr. %" x 3/" Rollpin 1/4 " x 17/8 " Ball Plunger %" Knob, Red, Exciter

No. Req'd.

2 4 6 4 1 1 1 1 2 10 2 2 1 1 2 2

4 3 2 2

Item Part No. Number 21 X204135 22 298-00276-02 23 102-09088-01 24 298-00312-47 25 298-02056-71 26 502-08109-80 27 502-08132-80 -102-07554-05 28 -

102-07554-06

=102-08672-06

29 -

102-08672-07

30 102-07253-01

Description

No. Req'd.

Knob, Black, Directional 2 Rod End, Female 14" 2 1 Plate, Stop Adj. 2 Screw, Stop Adj. 2 Check Nut 3/8 " 1 Bracket, Cable Mount 2 Bracket, Detent.

Cable (Morse #43B192) 192" Lg. Direction Control 1 for Model 900 Cable (Morse #43B168) 168" Lg. Direction Control 1 for Model 848 Cable (Morse #43BC90) 90" Lg. Exciter Control for 1 Model 848 Cable (Morse #43BC108) 108" Lg. Exciter Control for 1 Model 900 Cable Brake 2 June '73

Always Give Serial Number of Machine

Rex

111

CONTROLS — TWO SPEED SHIFT & EMERGENCY STOP

Item Part No. Number

Description

No. Req'd.

1 1 102-07963-01 Control, 2 Speed Shift (Morse #E48996) 1 02-07244-15 Control Cable (Morse #63B66) 1 2T102-07244-11 Control Cable (Morse #63B84) Mod. 900 1 3 502-04456-80 Bracket, 2 Speed Support 1 4 298-00122-02 Rod End, Female 54," - 24 1 5 102-03669-01 Lever, 2 Speed Shift 1 6 298-00241-02 Bearing, Flanged Nylon 1 Shoulder Bolt 7 298-08014-04 1 8 102-03668-01 Bracket, 2 Speed Shift 1 9 298-00123-02 Rod End, Female (Sphereo #TR6) 1 10 298-05075-92 Rod End, Male (Sphereo #FRE-6) 1 11 298-02011-71 Locknut %" UNF 2 12 398-02001-82 Cap Screw %" x 1 1/2 " Stop, 144" Lg. 13 102-07957-02 Cable, Emergency

1 (Morse #B48701) 14 102-08022-01 Mounting Bracket 1 1 #A31804) 15 298-00146-47 Cable Clamp (Morse

1 16 298-00030-47 Cable Clamp, Jiffy

1 17 398-02075-82 Cap Screw UNF 54 6 " x 134" June '73

Always Give Serial Number of.Machine

Rex 111

469-9

BRAKE

469-11

15

Item No.

Part Number

1 502-04460-80 2 102-08109-01 3 102-01991-01 4 502-02791-80 5 298-00080-47 6 402-01596-02 7 102-01891-01 8 298-02131-62 9 298-05019-92 10 298-05017-92 11 298-05018-92 12 298-02129-62 13 502-02306-80 14 502-02306-83 15 502-08118-80 16 X204112 17 502-02965-80 18 298-02257-62 19.1502-02306-84 L502-02306-83

Description

Support, Brake Cylinder Brake Cylinder Yoke End Lever, Brake Pedal Pin, Brake Lever Pad, Brake Pedal Spring Connector Bolt, Connector Gasket Gasket Tee, Brake Line Line, Brake, 27" Lg. Line, Brake, 72" Lg. Line, Brake, 36" Lg. Clip Lock, Brake Union, Tube Fitting Brake Line, 96" Lg. (Model 900) Brake Line, 72" Lg. (Model 848)

Always Give Serial Number of Machine

No. Req'd.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 June '73

Rex

469-12

POWER UNIT - GM 3-53

Always Give Serial Number of Machine

Rex

III

POWER UNIT - GM 3-53

Item No.

Part Number

1

102-08358-01

2

502-04399-80 1502-04257-80 1_502-04257-81 102-03283-01 102-05164-01 402-00624.02 102-07362-01 102-07361-01 102-07360-01 102-03666-01 102-08704-01 102-07564-01 398-02002-22 102-03694-01 502-02735-80 502-02736-80 102-07949-01 102-03675-01 298-07073-91 102-03680-01 502-08128-80 102-09120-01 298-05701-68 298-09005-86 298-02066-56 298-02067-56 298-00092-47 298-00263-47 398-14001-28 502-04625-80 102-30255-01 102-03711-01 502-02980-80 291251-48 502-04765-80 502-08151-80 102-09209-01 298-05126-92 502-06328-80 102-09125-02 298-09026-86 502-08149-80 298-00216-47 502-04803-80 102-09096-01 298-05515-68 502-04755-80

3

4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Description

No. Req'd.

Diesel Engine GM 3-53, #5033-7201 (See Series 53 GM Engine Manual) 1 1 Support, Front Support, Rear L.H. 1 Support, Rear R.H. 1 Adapter Flywheel 1 Drive Plate 1 Hub, Drive Plate 1 Cap Screw, Drilled 6 Joint Center Bonded 12 Cap Screw, Drilled 12 Adapter Plate 1 Pump, Vib. (See Contents) 1 Washer, Special 4 Cap Screw '/2 " x 1'4" HT. HC. 4 Bracket, Volt. Reg. 1 Bracket, Steering Pump 1 Bracket, Steering Pump 1 Pump, Steer. (See Contents) 1 Sheave 1 V-Belt 2 Adapter Flange Yoke 1 Adapter Tube, Air Inlet 1 Hose, Upper Radiator 1 Hose, Lower Radiator 1 Clamp, Hose 4 Sending Unit, Oil Press.

1 Sending Unit, Water Temp.

1 Either Cup 1 Ball Joint 1 Street Elbow 14" x 90° 1 Bracket, Throttle Cable 1 Wire Harness 1 Wire Harness 1 Control Arm, Governor 1 Universal, incls. item 80 1 Auxiliary Fan Shroud 1 Bracket, Exhaust Pipe 1 Air Cleaner, incls. 77, 78, 79 1 Mounting Band, Air Cleaner 2 Bracket, Air Cleaner 1 Hose 3 Clamp, Hose 8 Tube, Air Inlet 1 Clamp, Tube 1 Exhaust Pipe 1 Spacer, Engine Support 2 Bushing 4 Support, Front 1

Item No.

Part Number

48 X203740 49 X203765 50 X203741 51 102-09039-01 52 102-08705-01 1502-06316-80 53

502-04754-80

502-08114-80 102-06518-01 298-05054-92 102-09434-01 298-05149-92 102-30192-01 298-05178-92 298-05703-68 298-00205-47 298-06509-68 298-00020-98 502-02157-80 398-17000-70 298-06085-17 67 1102-06973-01 68 X202821 69 502-08113-80 102-07554-06 54 55 56 57 58 59 60 61 62 63 64 65 66

70-

102-07554-05 102-08672-07

71-

102-08672-06

72 73 74 75 76 77

298-00276-02 502-02786-80 502-01341-90 502-04850-80 X203699 102-09209-02

78 79

102-09209-03 102-09209-04

80

298-06042-91

469-13

No. Req'd.

Description

Flange Yoke 1 Flange Yoke 1 Snap Ring Yoke 4 Companion Flange 1 Pump, Hydraulic Drive (See Contents) 1 Bracket, Hydraulic Pump (Eff. S/N HX297) 1 Bracket, Hyd. Pump (Pre. to S/N HX297) 1 Bracket, Radiator 2 Radiator 1 Oil Cooler 1 Mounting Bar, Exhaust Pipe 1 Muffler 1 Mounting Angle 1 Extension, Exhaust 1 Mounting Bushing 4 Clamp, Muffler 3 Indicator, Air Cleaner Drain Cock 1 Stop Bracket (See page 41) 2 Sq. Hd. Set Scr. %" x 1'/2 " 4 Neutral Start Switch 2 Special Nut 2 Ball Joint x 28" 1 Lever, Pump Control 1 Cable (Morse #43B168) 168" Lg. Direction Control for Model 848 1 Cable (Morse #43B192) 192" Lg. Direction Control for Model 900 Cable (Morse #43BC114) 114" Lg. Exciter Control for Model 900 1 Cable (Morse. #43BC90) 90" Lg. Exciter Control for Model 848 1 Rod End, Female 1 Hose, Fuel Line Return 1 Hose, Fuel Line Inlet 1 Tube 1 Channel Rubber 1 Element (Donaldson #P11-8159) 1 Gasket (Donaldson #P18462) 1 Cup Gasket (Donaldson #P10-1401) 1 Journal 8 Bearing Kit (Spicer #5-153X) 1 June '73

Always Give Serial Number of Machine

Rex

111

HYDRAULIC SYSTEM — TRACTION DRIVE

469-14

17 .12

13 14

To Cooler

To Vibrator Pump

Item No.

Part Number

Description

No. Req'd.

102-03691-02 Hose Assembly, 1" SAE x 42'4" Lg. 102-03688-02 Hose Assembly, %" NPT to 1'4 6 " JIC x 1 82" Lg. 3 502-02783-81 Hose Assembly, 74," JIC x 42" Lg. 4 502-08005-80 Hose Assembly, '4" NPT to '4" JIC x 1 20" Lg. 3 5 298-08118-86 Elbow '4" x 45° 1 6 298-08078-86 Straight Adapter, '4" NPT to 1'4 6 " JIC 7 102-08705-01 Hydraulic Pump, Traction (See Contents) 1 1 8 102-03849-03 Hose Assembly, 34" NPT x 30" Lg. 4 9 102-01594-04 "0" Ring, 154 6 " I.D. x n o " O.D. 8 10 298-08033-86 Split Flange Clamp 1" 16 11 398-02005-56 Cap Screw %" x 1 14" 1 —602-10051-01 'Hydraulic Tank, incls. the following: 1 102-08418-01 Plate, Cover 1 102-07864-01 Gasket, Cover 12— 1 398-14000-91 Pipe Cap, 1" 1 398-14000-89 Pipe Cap, %" 2 398-14006-19 Pipe Cap, '/" 1 13 102-08510-01 Tube, Hydraulic Tank 2 14 298-00133-53 Element, Filter 1 15 502-02733-80 Cover, Hydraulic Tank 1 16 102-07320-01 Cap, Filler 1 17 298-13010-86 Breather June '73 1 2

Always Give Serial Number of Machine

Rex

469-15

HYD. PUMP - TRACTION DRIVE

I

gas-rice r, m raft

co,

10

I ligtoftWA U

-

11 8 9

0

0 0

12

10

44 BSI 13

,I WIT 14 15 16

rai 17

O

HYDROSTATIC PUMP — TRACTION DRIVE SUNDSTRAND MODEL NO. HT22-2081 REX Part No. 102-8705-1 Item No.

P art Nu mber

1 2 3 4 5 6

102-4365-4 102-4365-6 102-4365-7 102-4365-11 102-4365-12 102-4365-1

7 8 9 10 11 12 13

102-4365-47 102-4365-52

14 15 16 17 18 19

102-4365-48 102-4365-49 102-4365-50 102-4365-46

Description Control Valve (*9800893) Gasket — Control Valve (*9800138) Charge Pump (*9800629-04) Gasket — Charge Pump (*9220327) Check Valve (*9800648) Seal Kit (*9510022) Consists of Items 7 thru 11 Inclusive Shaft Seal Housing Seal Retainer Seal Spring "0" Ring "0" Ring Retaining Ring (*9006320-0025) Charge Pump Relief Valve Poppet (*9800597) Cotter Pin (*9004600-0607) Pin (*9220441) Washer (*9009610-2850) Orifice (.036" Dia.) (*9800483) "0" Ring for .036" Orifice Control Shaft Handle (*9800690)

No. Req'd.

1 1 1 1 1 1 1 1 6 2 1 3 1 1 1 1 1 3 1

* Sundstrand Corp. Part Numbers

Always Give Serial Number of Machine

Rex

469-17

HYD. MOTOR — TRACTION DRIVE

HYDROSTATIC MOTOR — TRACTION DRIVE SUNDSTRAND MODEL 22-3055 REX PART NO. 102-8506-1

Item No.

Part Number

1 2

102-4365-78 102-4365-1

3

102-4365-77

Description Manifold Assembly (*9800834-53) Seal Kit (*9510022) Consisting of: *9210247 Shaft Seal *9210248 Housing Seal *9004102-1290 "0" Ring *9004100-2340 "0" Ring *9220242 Seal Spring Relief Valve Assembly (*9800370-55)

No. Req'd.

1 1 1 1 2 1 6 1

*Sundstrand Corp. part numbers.

Always Give Serial Number of Machine

Rex

469-18

TWO-SPEED TRANSMISSION CASE

PART OF TRACTION DRIVE AXLE 102-8095-1 (Rockwell Std. No. 35-3380-A)

12 REAR — Bolts on to Diff. Carrier Hag.

34

32 33

43 25 26

24

23

28 20 27

0

.9

31 29 30

X22 16

17

18

19

3 14

?P' fl?

FRONT

Ctek 15

k15

10

Always Give Serial Number of Machine

Rex iii

35

TWO-SPEED TRANSMISSION CASE

PART OF TRACTION DRIVE AXLE 102-8095-1 (Rockwell Std. No. 35-3380-A)

Item Part No. Number 1 102-06168-35 2 102-06168-36 3 102-06168-37 4 298-00341-02 5 298-00339-02 6 102-01781-01 7 102-06168-40 8 102-06168-43 102-06168-65 102-06168-66 9- 102-06168-67 102-06168-68 10 102-06974-13 102-06168-44 11-

102-06168-42 102-06168-41 102-06168-10

12-

102-06168-11

13 102-08095-14 102-06168-14 14 -

102-06168-15 102-06168-16 151102-07872-14 102-07872-14 16 102-06168-47

_

17 102-06168-48 18 102-08095-25 19 102-08095-88

Description

No. Req'd.

Nut, Input Bearing Adjusting (*1827-A-287) 1 Lock for Adjusting Nut (*1829-P-874) 1 Washer, Input Pinion Bearing 1 (*1829-U-879) Cone, Input Pinion Bearing (Inner & Outer) (*395-A) 2 Cup, Input Pinion Bearing (Inner & Outer) (*394-AS) 2 Gasket, Hydraulic Motor Adapter (Outer) 1 Adapter for Hydraulic Motor (* A-3897-M-2405) Gasket, Hydraulic Motor Adapt. (Inner) (*2808-X-1090) 1 Bolt, Case & Cover • (*5-1611-1) 10 Nut, Case & Cover (*N-16-1) 10 Lock Washer, Case & Cover (*WA-16) 10 Dowel Trans. Case to Cover (*1846-A-313) 2 Cover, Trans. Case (*3876-R-408) 1 Stud, Hydraulic Motor Adapter (*4-X-733) 6 Nut, Hydraulic Motor Adapter (*N-18-1) 6 Lock Washer, Hydraulic Motor Adapter (*WA-18) 6 Cap Screw (Front & Rear Cap) (*S-2710-1) 7 Lock Washer Idler Pin (Front Cap) (*WA-17) 4 Cap, Idler Pinion (Front) (*3866-D-992) 1 Shim, Idler Pinion Front Brg. .003" (*2803-C-2083) 3 .005" (*2803-D-2084) 3 .010" (*2803-E-2085) 1 Plug, Oil Filler (*P-18) 1 Plug, Oil Drain (*P-18) 1 Pinion, 24T Input Drive (*3891-C-1199) 1 Nut, Clutch Drive Pinion (*1827-17-285) 1 Collar, Shift (*3897-D-2526) 1 Pinion, 24T Clutch (*A-3891-R-1448) 1

Item Part No. Number 20 102-06168-53 21 102-07872-44 22 102-06168-52 23 102-06592-94 24 102-08095-89 25 102-06168-31 102-07872-23 102-06168-33 27 102-06168-54 26

28 102-08095-18 29 102-02515-68 102-07872-17 30 -

102-07872-11

31 102-08095-90 32 102-06168-34 33 102-06168-24 34 102-07872-55 35 102-07872-18 36 102-06168-17 37 102-06168-18 38 102-06168-19 39 102-08905-17 40 102-06168-20 41 102-06168-22 42 X7857 43 102-06168-56 44 102-06168-11

No. Req'd.

Description Set Screw, Clutch Pinion (*5-865) Spring, Hi-Lo, Shift Shaft Lock (*2858-W-257) Shift Ball (*1898-H-34) Shift Shaft (*2843-A-521) Oil Seal, Shift Shaft (*A-1805-Z-26) Hi-Lo Shift Fork (*2849-B-158) Set Screw (*26-X-96) Lock Wire (*LW-168) Bushing, Lo-Speed Drive Gear (*1825-M-117) Gear, Lo-Speed Driven 45T (*A-3892-B-2524) Gasket, Trans. Case to Cover (*2808-H-1100) Cap Screw, Trans. Case to Carrier (*5-2910-D1) Lock Wire, Trans. Case to Carrier (*LW-1620) Transmission Case (*A2, A3-3875-U-645) Plug, Shift Shaft Hole (*1850-Z-78) Gasket, Idler Pinion Rear Brg. Cap (*2808-W-1089) Cap, Idler Pinion (Rear) (*3866-G-1021) Cap Screw (Special) Idler Pin. (Rear) Cap (*5-7710-S) Cup, Idler Shaft Pinion Bearing (Front) (*25821) Cone, Idler Shaft Pinion Bearing (Front) (*25878) Gear, 55T, Lo-Speed Idler (*3892-N-2484) Pinion, 34T, Idler Shaft (*3891-N-1418) Key, Lo-Speed Gear (*16-X-103) Cone, Idler Shaft Pinion (Rear) (*3877) Cup, Idler Shaft Pinion (Rear) (*3820) Oil Seal, Bevel Pinion Bearing (*A-1805-Y-545) Lock Washer, Idler Pinion Brg. Cap (Rear) (*WA-17)

1 3 3 1 1 1 1 1

* Part No.'s are Rockwell Standard.

Always Give Serial Number of Machine

Rex

111

469-19

TRACTION DRIVE AXLE 102-8095-1 ;

469-20

(Rock Std. No. 35-3380-A)

28

32 z 33 z

23

1 z

24 25 z z

z

10

DIFF. CASE / PLAIN HALF/ r

11

/

/ 20

z

rz

12

z z'l r

( @

DIFF. CARRIER

1

38 28

DIFF. CASE FLANGED HALF

s z 0 z 25 cP y z 24 zr z 23 z

5 /

z z 22

20 ---® 16 19 , 18 z' 17 z 5 rz 14 z z

DIFF. CARRIER COVER

/

13

Always Give Serial Number of Machine

Rex

111

TRACTION DRIVE AXLE 102-8095-1

469-21

,

(Rock. Std. No. 35-3380-A)

Item No.

Part Description Number

No. Req'd.

102-06168-57 Cone, Bevel Pinion Bearing 2 (Inner & Outer) (*55176-C) 2 102-01514-20 Cup, Bevel Pinion Bearing 2 (Inner & Outer) (*55443) 102-01514-22 Shim, Bevel Pinion Bearing 3 .003" (*2803-W-1791) 3 3 102-01514-23 .005" (*2803-X-1792) 1 102-01514-24 .010" (*2803-Y-1793) 102-06168-73 Spacer Set; Bevel Pinion AR Brg. .219" (*2203-N-1054) 4 thru (Two, as Required) AR .254" (*2203-Y-1065) 5 102-01514-18 Matched Set; Grs. (XA35350) 1 Ring Gear (*35350) 1 and Pinion (*35131) (Not Sold Separately) 6 102-01514-15 Bearing, Bevel Pinion Brg. 1 (Rear) (*1228-7-52) 7 102-01514-14 Lock Ring, Bevel Pinion 1 Bearing (*1229-Z-1300) 8 102-07572-20 Plug, Diffential Carrier, 1 Inspection (*1250-5-149) 9 102-08095-84 Flange, Axle Tube (*3897-Z-2886) (Part of item 13) 2 10 102-08095-48 Snap Ring (*1854-C-289) 2 11 102-08095-42 Oil Seal, Axle Shaft (*A1205-W-829) 2 12 102-08095-30 Axle Shaft (*3802-Y-1507) 2 13 102-08095-85 Axle Tube (*A-3816-S-617) (incls. item 9) 2 14 102-08095-28 Cover, Differential Carrier (*A48-3800-Z-468) 15 102-01514-16 Gasket, Differential Carrier 1 & Cover (*2208-L-272) 16 102-08095-29 Carrier, Differential, L.H. (*A3-3800-Y-649) 1 17 102-07872-26 Pin for Thrust Block (*1246-G-293) 1 18 102-07872-38 Block Thrust 1 (*2297-A-573) Plug, Differential Case Drain (*P-18) 1 19 102-07872-14 Plug, Differential Case 1 Filler and Level (*P-18) 102-07572-14 -Bolt, Differential Carrier 10 Flange (*5-1814-1) 102-06168-42 Nut, Differential Carrier 20Flange (*N-18-1) 10 102-06168-41 Lock Washer, Differential Carrier Flange (*WA-18) 12 1

_

Item Part No. Number

Description

No. Req'd.

21 102-07872-16

Cap Screw, Differential Carrier Flange (Front) (*5-2811-1) 2 22 102-06168-28 Oil Breather, Differential Carr. Cover (*A-1199-J-166) 1 102-08095-20 Spacer Set, Differential Brg. Cup. .146" (*1244-D-394) thru .164" (*1244-K-401) Contains .146", .149", AR .152", .158", and .164".

23102-08095-21 and .134" (*1244-K-479) thru .179" (*1244-T-488) Contains .134", .140", .170", .176" and .179".

AR 24 102-01514-09 Cup, Diff. Brg. (*33472) 2 25 102-01514-05 Cone, Diff. Brg. (*33281) 2 26 102-08095-87 Case, Differential, Flanged Half (*3235-X-882) (Not Sold Sep., Part of item 38) 1 27 102-01574-41 Case, Diff., Plain Half (*3235-P-354) (Not Sold Sep., Part of item 38) 1 102-07872-21 Bolt, Differential Case (Short) (*15-X-926) 28102-07872-22 Bolt, Differential Case (Long) (*15-X-927) 8 102-06592-64 Bolt, Differential Case & Drive Gear (*15-X-667) 12 29 102-01574-22 Nut, Differential Case & Drive Gear (*N-28-1) 12 30 102-06972-01 Differential, Internal Assy., No Spin (*A2-3235-G-397) Items 31 thru 37, Assembled (Detroit Auto Co. #NS-21-63061) 1 31 Side Gear 2 32 Spring 2 33 Spring Retainer 2 Cam & Clutch Assembly 2 34 -{ Holdout Ring 2 35 Snap Ring 1 36 Center Cam 1 37 Spider 1 38 102-08095-86 Case Assembly with No Spin Internal Assembly (*A84-3235-X-882) Contains items 26, 27, 28, 29 & 30.

1 -

* Part No's. are Rockwell Standard.

Always Give Serial Number of Machine

Rex 111

469-22

WHEEL ENDS

PART OF TRACTION DRIVE AXLE 102-8095-1 (Rock. Std. No. 35-3380-A)

Always Give Serial Number of Machine

Rex 111

469-23

WH EEL ENDS

1

Part Number 102-06592-23

2

102-08095-64

3

102-07572-57

4

102-08095-69

5

102-07572-58

6 7

102-08095-72 102-08095-73

8

102-08095-74

9

102-07572-63

10

102-08095-67

11

102-07572-86

12

102-08095-70

13

102-08095-42

14

102-08095-57

15

102-08095-36

16

102-06592-36

17

102-08095-33

18

102-08095-56

19 20

102-08095-68 102-01841-72

21

102-08095-60

22

102-08095-71

23

102-08095-75

24

102-08095-76

25

102-08095-62

26

102-08095-77

27 28 29

102-06592-13 102-08095-50 102-07572-46

30

102-08095-78

31

102-08095-40

32

102-08095-37

Item No.

No. Description Req'd.

Push Rod, Wheel Cylinder (*A-1245-W-49) Wheel Cylinder Assembly (*Al2-3261-P-16) Spring, Brake Shoe Return (*2258-T-124) Washer, Guide Pin (*1729-N-248) "C" Washer, Guide Pin (*1229-H-216) Brake Shoe (*3722-V-334) Lining, Brake Shoe (*2740-Q-3137) Rivet, Brake Shoe to Lining (*RV-387) "C" Washer, Brake Anchor Pin (*1229-M-221) Anchor Pin, Brake (*1759-L-38) Bushing, Brake Anchor Pin (*1225-P-94) Strap, Anchor Pin (*1245-X-50) Oil Seal, Axle Shaft (*A-1205-W-829) Spindle, Wheel (*A-3897-C-2447) "0" Ring, Spindle to Housing (*5-X-591) Nut, Spindle to Housing (*1827-R-252) Bolt, Spindle to Housing (*5-1920-1) Spacer, Brake to Housing (*3897-R-2072) Nut, Anchor Pin (*N-114) Lock Washer, Anchor Pin Nut (*WA-114) Backing Plate, Brake (*A-3736-Q-771) Bracket, Shoe Anchor (*3764-M-29) Rivet, Anchor Bracket (*RV-169) Guide Pin, Brake Shoe (*1746-G-59) Adjusting Cam Assembly (*A-2747-A-105) Spring, Adjustable Cam (*2758-U-153) Cam, Adj. (*2847-R-200) Drum, Brake (*3819-H-450) Nut, Wheel Hub (*1199-H-112) Stud, Wheel Hub (*20-X-262) Hub, Wheel Assembly (*A-322-J-452) Cap Screw, Planet. Spider to Hub (*10-X-667)

4 2 2 16

Item Part No. Number 33 102-08095-34 34

102-08095-31

35

102-08095-32

36

102-08095-47

37

102-08095-51

8 4

38

102-08095-52

4

39

102-08095-45

64

40

102-08095-55

4

41

102-08095-46

4

42

102-08095-49

4

43

102-08095-48

2

44

102-08095-53

2

45

102-08095-41

2

46

102-08095-39

2

47

298-00065-02

24

48

102-06592-83

24

49

102-08095-54

2 4

50 51

102-08095-58 102-07980-21

4

52

102-08095-79

2

53

102-08095-80

2

54

102-07873-17

12

55

102-0 9`)95-81

8

56

102-08095-82

4

57

102-08095-83

4 4 2

58

102-08095-43

59

102-08095-35

16

60

298-00162-02

16

61

102-08095-38

2

62

102-08095-44

32

63 64

102-08095-30 102-08095-61

Description

No. Req'd.

"0" Ring, Hub to Spider (*5-X-589) 2 Plug, Planet. Spider Drain 2 (*P-16) Set Screw, Planet, Pinion 6 Shaft (*S-665) Snap Ring, Planet. Pinion Shaft (*1854-Z-182) 6 Shaft, Planet. Pinion 6 (*3880-H-814) Pinion, Planetary (*3891-Q4629) 6 Washer, Planetary Pinion Thrust (*1829-C-783) 6 Spider, Planetary Pinion (*A-3897-E-1695) 2 Pin, Hub Bearing Adj. Nut 2 (*1846-W-361) Thrust Button, Axle Shaft (*1898-Z-858) 2 Snap Ring, Axle Shaft (*1854-C-289) 2 Gear, Planetary Sun (*3892-T-1814) 2 Nut, Hub Bearing Adj. (*A-1227-H-736) 2 Cone, Hub Bearing (Outer) (*34300) 2 Cup, Hub Bearing (Outer) (*34478) 2 Plug, Planetary Spider Filler (*P-212) 2 Gear, Planetary Ring (*3892-G-2997) 2 Slinger, Oil (*3905-B-80) 2 Gasket, Inlet Connection (*2208-V-204) 2 Bleeder Screw (*1199-H-1334) 2 Inlet Connection (*1199-D-784) 2 Lock Washer, Wheel Cylinder (*WA-16) 4 Cap Screw, Wheel Cylinder (*S-267) 4 Gasket, Inlet Connection Bolt (*2208-D-82) 2 Bolt, Inlet Connection (*15-X-88) 2 Oil Seal, Hub Bearing (*A-1805-Z-546) 2 "0" Ring, Spindle (*5-X-590) 2 Cup, Hub Bearing (Inner) (*27620) 2 Cone, Hub Bearing (Inner) (*27691) 2 Bushing, Wheel Spindle (*1825-Z-234) 2 Shaft, Axle (*3802-Y-1507) 2 Brake Shoe & Lining Assy.

Contains items 6, 7 and 8, Assembled (*A3-3722-V-334) 2

Always Give Serial Number of Machine

Rex 111

469-24

VIBRATOR HYD. SYSTEM

Always Give Serial Number of Machine

Rex

111

VIBRATOR HYDRAULIC SYSTEM

Item No.

Part Number 1 2

3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

Description

Pipe Coupling 1" NPT Hose-Tank to Cooler 84" Lg. 298-14503-86 Reducing Bushing 1/4" x 1/4" 298-08080-86 Straight Adapter V x " 298-17002-86 Pipe Tee 1/4" 298-14500-86 Reducing Bushing 1" x 1/4" 298-12002-86 Close Nipple 1/4" 298-02247-62 Elbow 1/2 " x 90° 298-12001-86 Close Nipple 1/2 " 502-01347-85 Hose, Cooler by-pass 298-02170-62 Check Valve 298-08076-86 Elbow 1 54 6 " "0" Ring x JIC X7487 Street Elbow '4" NPT x 90° 102-04365-15 Manifold Relief Valve, 3000 psi 102-05254-01 Manifold Block 298-08030-86 Elbow V , "0" Ring x JIC x 90° 298-02093-62 Elbow 7/8 ", "0" Ring x '4" NPT x 90° 298-02245-62 Elbow 7/8 ", "0" Ring x 1/4" NPT x 90° 102-01594-04 "0" Ring, SAE 1" 298-08033-86 Split Flange Clamp 1" Cap Screw %" x 11/4" HC, HT w/Lock Washer X7604 3/16" Cold Shut 102-08094-01 Connecting Bar 298-09035-86 Hose Clamp

Cap Screw 1/2 " x 1" w/Lock Washer & Nut 102-03695-01 Hose 1'/, 6 " x 54'4" Lg. 102-03702-01 Hose 154 6 " x 531/4" Lg. 298-12003-86 Nipple 1/4" NPT 298-02081-62 Street Elbow 1/4" NPT x 45° 298-02246-62 Service Tee 1/2 " NPT, F 298-17010-86 Tee 1/2 " NPT, F 102-08580-01 Hydraulic Motor, Vibrator 298-00012-93 Cap Screw, Self-Locking '4" x l'4" 298-02075-62 Elbow 1/2 " NPT x 90° X7484 Reducing Bushing 1/2 " x %" NPT 298-02244-62 Adapter 3/4 " Female to '/" Male NPTF 298-00019-01 Elbow V," Tube x 1/4" NPT 298-02078-62 502-01350-95

No. Req'd.

1

Item No.

Part Number

38 39

298-00015-01

40

102-03998-01

41

102-03948-01

42

102-03946-01

2 2

43

102-03946-02

1 1

44

102-03849-03

1

45

502-02785-80

46

502-01347-84

47

502-08004-80

48

502-01341-97

1 1 1 1 1 1 1 4 1 1

1 2 10 20 40 3 1 1 1 1 1 1 1 2 2 1

4 1 1 1 1

49

298-02086-56 {502-08007-80 50

51

298-02248-62

52 53 54

102-04365-33 102-04365-40 102-04365-41

55

56 57

298-02068-62

58 59

602-10051-01 298-05054-92

60

102-08704-01

469-25

Description

No. Req'd.

Connector 14" x 14" NPT 1 Copper Tube '4" O.D. x .037" Wall x 48" Lg. 1 Hose Assembly 1" I.D. x 33" Lg. Has Straight Flange Head & 90° Flange Elbow 1 Hose Assembly 1" I.D. x 26" Lg. Has 45° Flange Elbow & 90° Flange Elbow 1 Hose Assembly 1" I.D. x 56" Lg. Has 90° Flange Elbow, Both Ends 1 Hose Assembly 1" I.D. x 62" Lg. Has 90° Flange 1 Elbow, Both Ends Hose Assembly % " I.D. Has % " Male NPT, 1 Both Ends Hose Assembly V2 " I.D. x 88" Lg. Has 1/2 " Male NPT & '4 "-14 Female Thread 1 Hose Assembly 3/8 " I.D. x 33" Lg. Has 14 " Male NPT One End & " NPT w/Swivel Other End 1 Hose Assembly 34" I.D. x 62" Lg. Has '4" Male NPT to 34" Male NPT 1 Hose Assembly %" I.D. x 72" Lg. Has '/4 " Male NPT & 14 " Male NPT w/Swivel 1 Vacuum Gauge 1 Bracket, Vacuum Gauge 1 Round Head Machine Screw 2 546" x 1" w/L.W. & Nut Straight Adapter 74 " "0" Ring x V," NPT 1 Pipe Cplg. " NPT, Galv.

1 "0" Ring 1 "0" Ring 2 Back-up Ring 2 Cap. Scr. 5/16 " x 3 34" HC, HT 6 Swivel Adapter 1/4" NPT x 90° Hyd. Tank (See page 14) 1 Oil Cooler (Perfex #A18-953) 1 Hydraulic Pump, Vibrator (See Contents) 1 June '73

Always Give Serial Number of Machine

Rex

HYD. PUMP — VIBRATOR

469-26

• •

• 1 0

0 13

yid

10 11 8 9

10

Jaw low 0 L -O;

ilmor

12

CI)

2

75-

14 15 16 17

o -r155 1

18

19

HYDRAULIC PUMP — VIBRATOR SUNDSTRAND MODEL NO. HT22-2080 REX Part No. 102-8704-1 Item No.

Part Number

1 2 3 4 5 6 '7 8 9 10 11 12 13 14 15 16 17 18 19

102-4365-4 102-4365-6 102-4365-8 102-4365-11 102-4365-12 102-4365-1

102-4365-47 102-4365-52 102-4365-48 102-4365-49 102-4365-50 102-4365-51 102-4365-46

Description Control Valve (*9800893) Control Valve Gasket (*9800138) Charge Pump Charge Pump Gasket (*9220327) Check Valve (*9800648) Seal Kit — Consists of Items 7 thru 11 Shaft Seal Housing Seal Retainer Seal Spring "0" Ring "0" Ring Retaining Ring (*9006320-0025) Charge Pump Rel. Valve Poppet (*9800597) Cotter Pin (*90046-0607) Pin (*9220441) Washer (*9009610-2850) "0" Ring (*9004101-0140) Special Control Valve (*980-1303-1) Control Shaft Handle

No. Req'd.

1 1 1 1 1 1 1 1 6 2 1 2 1 1 1 1 3 1 1

* Sundstrand Part Numbers.

Always Give Serial Number of Machine

Rex 111

HYDRAULIC MOTOR — VIBRATOR

Item No.

Part Number

No. Req'd.

Description

Hydraulic Motor, Vibrator (Commercial *M25X-778-BEVL-15-7) incls. the following: 102-07884-10 Check Assembly (*M1391K) 102-07883-22 Shaft Bushing (*AH2010) 102-07883-23 Spring (*A1327-182) 102-07883-11 Roller Bearing (*S1032) 102-07884-14 Retainer Ring (*LA1072) 102-07884-15 Hi-Pressure Seal (X73-50-3) 102-07883-28 "0" Ring (*L3006-26) 102-07883-29 Tapered Roller Bearing (*X126-8) 102-08580-11 Shaft End Cover (*XA-1686-8) 102-07884-19 Drive & Driven Gear (*KA1007M-15) 102-07883-33 Shaft (*PB1135) 102-07883-34 Spacer (*YA-1669-1) 102-07883-35 Retaining Ring (*X97-100)

469-27

,

102-08580-01

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

102-07883-15 102-07883-17 102-07884-24 102-07883-16 102-07883-10

Thrust Plates (*Y1058) Gasket (*UB3006-244) Gear Housing (*MA1688-15-64) Pocket Seal (*K3026-27) Port End Cover (*RA1603)

1 2 1 1 4 1 1 1 1 1 1 Set 1 1 1 4 2 1 12 1 June '73

* Part Numbers are Commercial Shearing & Stamping Co., Youngstown, Ohio

Always Give Serial Number of Machine

Rex

VIBRATORY ROLL — LEFT SIDE

22

20

-1,21

1'19

8

Item Part No. Number

Description

1 502-05979-80 Roll (-102-03647-01 Cover 1102-03248-01 Lubrication Plate 1502-04383-80 Tire Housing Half, Bottom 3 502-04814-80 Tire Housing Half, Top 102-08085-11 Safety Walk Tape 6" 4 602-03227-01 Pneumatic Isolator w/Keyway, incls. 4a, 4b, 4c 4a 502-04384-80 Wheel 15" 4b 298-06035-68 Tire, Radial Ply 5:00-15 4c 298-06036-68 Tube, 5:00-15 5 402-02604-02 Mounting Flange 102-04516-01 Ring, Bearing Carrier 102-07900-01 Tab, Bolt Lock 7 298-03093-68 Oil Seal 7 154 6 " I.D. 8 102-07897-01 Shim, .005" 9 102-07897-02 Shim, .0075" 10 102-07897-03 Shim, .020" 11 298-00275-02 Bearing Cone 12 298-00274-02 Bearing Cup 13 402-02605-02 Hub, Wheel 14 102-03646-01 Spacer, Bearing 15 298-03094-68 Oil Seal, 8 1/2 " I.D. 2

64

-

No. Req'd.

1 1 1 1 1 2 1 1 1 1 1 1 6 1 6 6 6 2 2 1 1 1

Item Part No. Number

16 17 18 19 20 21 22 23 24 25 26

298-03089-68 402-02606-02 X7846 398-20000-23 X7328 398-14000-44 398-08000-11 298-00312-02 402-01693-02 502-02998-80 102-08580-01

27 28 29 30

298-07020-34 298-03095-68 102-07974-01 102-07976-01

31 298-02045-71 32 398-20000-81 33 102-07975-01 34 398-06001-15

469.29

17

No. Req'd.

Description

1 Oil Seal, 3%" I.D. 1 Hub, Roll Drive L.H. 1 Grease Hose 34," I.D. x 12" 1 Washer %" 1 Rubber Grommet 1 Coupling V," 1 Lubricating Fitting #1613B 1 Spherical Bearing 1 Retainer, Labyrinth 1 Roll Shaft w/Weights Hydraulic Motor, Vibrator 1 (See Contents) 1 Snap Ring 1 Seal, Coupling 1 Coupling Half, Exciter Dr. Coupling Sleeve, 1 Exciter Drive 1 Locknut '4" -14 1 Thrust Washer 1 Coupling Half, Driven Woodruff Key %" x 1%" #E-1210 1 June '73

Always Give Serial Number of Machine

Rex

111

469-30

VIBRATION AMPLITUDE UNIT

Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

502-04747-80 298-00218-02 102-08522-01 398-11000-72 602-03145-01 502-04695-80 402-01728-02 102-08520-01 298-00286-02 298-08521-34 298-06018-34 502-02931-80 398-02001-52 102-08728-01 398-03000-63 502-02930-80 102-08521-01 398-02001-46 102-08521-02 102-08660-01 102-09453-01 102-30267-01 102-09399-01

Description Bracket, Link Rod End %" Threaded Rod %" Jam Nut %" Transducer Assy., inc.ls. 6 thru 19 Mounting Frame Oscillating Frame Shaft Ball Bearing, Sealed Retaining Ring Roll Pin 34 6 " x 1 1/2 " Core Stack, Stationary Cap Screw 14" x 2" Transformer, Coil Cotter Pin V." x 1 14" Core Stack, Oscillating Shim .005" Cap Screw 14" x 1" Shim .050" Control Assembly (See page 31) Vibration Meter Stop Bracket Cap Screw %", Special

Always Give Serial Number of Machine

No. Req'd.

1 2 1 2 1 1 1 1 2 2 1 1 3 1 1 1 8 4 2 1 1 1 1

Rex

111

469-31

CONTROL BOX - VIBRATION METER

CC Cr: U = LU LU I- 0 I- H. LU LU 0 Le, -I- -I- I

111 H2 XI X2

11 GREEN WHITE BLACK RED .GREEN

BLACK RED WHITE N

7

I XII/ •Ilk A 11 --2111 MI

12

4 1

1 2 3 4 5 6 7 8 9 10 11 12

102-08660-01 102-03887-01 298-16182-17 298-26048-17 298-24053-17 298-24036-17 298-26096-17 298-26095-17 102-03888-01 298-00011-17 102-09291-02 102-09291-02 102-08528-01

!

J

' ' \ \ '--' cZ

HI

I 1 1

Part Number

___

I I

Item No.

1

HI XI H2 4 X2 6 7 8

6-

)(

`6-° . szos.

1.10 0 7 X2

®

_

- -. ..-

-_ .. -

/

8

3

)

e 0

10

I

1

No. Req'd.

Description Control Assembly, incls. 1 thru 12 Control Box Rheostat Lock, Shaft Choke Rectifier Terminal Terminal Block Bracket Cord Grip Cord #14-4 Cord #14-4 Sub-Panel

1 1 1 1 1 1 7 1 1 2 3 Ft. 12 Ft. 1 June '73

Always Give Serial Number of Machine

Rex 111

469-32

ARTICULATING CROSS

10

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Part Number 402-02616-04 298-10027-02 298-10028-02 102-08757-03 102-08757-02 102-08757-01 102-03977-01 102-03978-01 398-02002-28 398-08000-07 102-08757-04 502-04676-80 502-07107-80 502-07109-80 398-02004-80 298-02035-71 298-03527-68

No. Req'd.

Description Articulating Cross Inner Bearing Ring Outer Bearing Ring Shim (.050") Shim (.010") Shim (.005") Sleeve - Bearing Bearing Retainer Cap Screw 1/2 - 13 x 2" H.C.-H.T. Lube Fitting, 1/8 " NPT #1610 Shim (.125") Bracket - Bearing Housing Roll Frame Main Frame Cap Screw 34 x 5 H.C.-H.T. Stop Nut 34" "0" Ring

1 4 4 4 8 2 4 4 24 4 2 1 1 1 8 8 1 Mar. '73

Always Give Serial Number of Machine

Rex

111

469-33

STEERING SYSTEM — SINGLE

17 9

9

SIMM PUMP

Item Part No. Number

Description

No. Req'd.

1 102-03725-01 Cylinder, Steering (See Contents) 1 2 2 102-07505-01 Ball Stud 3 102-09236-01 Steering Valve (See Contents) 1 4 298 -08110-86 Adapter, Straight % "- 16 to 34 "- 16 JIC 4 5 298-02171- 62 Elbow 90° 1/2 " NPT to 3/4 "- 16 2 6 298-08112- 86 Elbow 45° 1/2 " NPT to 34 "- 16 1 1 7 102 -07033-07 Hose %" x 30 Lg. 1 8 298-08018-86 Adapter 1/2 " NPT 1 9 298-09018-86 Clamp, Hose 1 10 398- 14000-52 Coupling 1/2 " 1 11 102 -03701 -01 Hose 1/2 " x 75 " Lg. 1 12 102-03701-02 Hose 1/2 " x 881/2 " Lg. 1 13 102 -03701-05 Hose 1/2 " x 136 " Lg. 1 14 102 -03701 -04 Hose 1/2 " x 102 " Lg. 1 15 298 -00068-47 Wheel, Steering 1 16 298 -00009-71 Nut 17 102-09148-01 Horn Button Kit (Ross #465611), 1 incls. 19 and 20 18 102 -09148-02 Parts Group (Ross #454871) 1 19 102 -09148-03 Horn Button (Ross #450043) 1 1 20 298-00278-47 Knob June '73

Always Give Serial Number of Machine

Rex 111

469-34

STEERING SYSTEM - DUAL

STEERING PUMP

Item Part No. Number 1 102-03725-01 2 102-07505-01 3 102-09236-01 4 298-08110-86 5 298-02171-62 6 298-08112-86 7 102-07033-07 8 298-08018-86 9 298-09018-86 10 398-14000-52 11 102-03701-01 12 102-03701-06 13 102-03701-10 14 102-03701-11 15 102-03701-12 16 X7887 17 298-00278-47 18 298-17012-86 19 298-00068-47 20 298-00009-71 21 102-09148-01 22 102-09148-02 23 102-09148-03 1502-06294-80 24 1502-06294-81 25 102-03701-05

Description Cylinder, Steering (See Contents) Ball Stud Steering Valve (See Contents) Adapter, Straight %"-16 to V-16 JIC Elbow 90° 1/2" NPT to 3/4 "-16 Elbow 45° 1/2" NPT to V-16 Hose %" x 30" Lg. Adapter 1/2 " NPT Clamp, Hose Coupling 1/2" Hose 1/2" x 75" Lg. Hose 1/2" x 96" Lg. Hose 1/2" x 180" Lg. Hose 1/2" x 108" Lg. Hose 1/2" x 37" Lg. Grommet Knob Tee, Adapter JIC 1/2" Wheel, Steering Nut Horn Button Kit (Ross #465611), incls. 22 23 Parts Group (Ross #454871) Horn Button (Ross #450043) Extension, L.H. Console Extension, R.H. Console Hose '/2

"

x 136" Lg.

Always Give Serial Number of Machine

No. Req'd.

1

2 2 8 2 1 1 1 1 1 1 1 1 2 4 2 2 2 2 1 2 1 1 1 1 1

Rex

ni

469 35

HYDRAULIC PUMP — STEERING

-

VICKERS PART NUMBER VTM42-60-75-15-MD-R1-12 REX PART NUMBER 102-7949-1 Item No.

Part Number

Description

No. Req'd.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

102-7949-10 102-7949-11 102-7949-12 102-7949-13 102-7949-14 102-7949-15 102-7949-16 102-7949-17 102-7949-18 102-7949-19 102-7949-20 102-7949-21 102-7949-22 102-7949-23 102-7949-24 102-7949-25 102-7949-26 102-7949-27 102-7949-28 102-7949-29 102-7949-30 102-7949-31 102-7949-32 102-7949-33

Manifold Sub-Assembly (*281409) Cover Sub-Assembly (*286613) Control Valve Sub-Assembly (*232797) Ring (*296599) Body Sub-Assembly (*296601) Shaft (*250455) Washer (*28931) Screw (*199144) Pin (*32559) Screw (*171523) Spring (*170072) Plug (*175049) Spring (*245507) Pressure Plate (*276396) Pin (*154364) Vane Kit (*922594) (10 pcs.)

Rotor (*213859) Cartridge Kit (*923092) Bearing (*222440) Snap Ring (*106641) Bearing (*148423) Key (*1606) Snap Ring (*172376) Seal Kit (*922904)

1 1 1 1 1 1 1 3 1 4 1 1 1 1 2 1 1 1 1 1 1 1 1 1

*Vickers Incorporated — P.O. Box 302 — Troy, Michigan 48084 part numbers.

Always Give Serial Number of Machine

Rex

ORBITROL STEERING VALVE — CHAR-LYNN

469-36

is 18 e 1,e ----A, i T aluer k, og, e ; Il

i

Vitt 1111Ly t

!Ii■tut.

213 30 20 fat

141 V!_ I i ,e-I 7-

36 31 38

7

33

39 40

ga

II 23 24 25 26 21 31

41 34

L_ _

32

No. No. Item Part Description Req'd.

No. Number Req'd.

26 ** _ _ _ Seal 1 102-09236-01 Steering Valve (Char-Lynn 27 102-09106-27 Bearing Kit (*64006) 1 *YP12-SHF) (Incls. 28, 29, 30) 1 1 1 102-09106-10 Terminal & Wire (*21142-1) 28 102-09106-28 Race, Bearing (*5542) 2 1 2 102-09106-11 Insulator Contact (*21138) 29 102-09106-29 Locator, Bearing (*5543) 1 1 3 102-09106-12 Spring Contact (*5029) 30 102-09106-30 Bearing, Thrust Needle 1 4 102-09106-13 Washer Contact (*5028) 1 (*5544) ** _ _ _ 2 5 102-08077-21 Ring, Snap (*14092) "0" Ring 31 1 1 6 102-08077-22 Ring, Retainer (*5245) 32 102-09106-31 Control Kit (*6419) (Incls.

1 7 102-08077-23 Bearing Assy. (*21146) 1 33 -41) Not Used 8 *** Housing 33 1 102-09106-14 Shaft Assy. (*6783) 1 9 ** * Sleeve 34 1 102-09106-15 Ring, Contact (*21149) 1 10 *** 35 Spool 1 1 102-09106-16 Insulator (*21151) 11 ** _ 36 "0" Ring 1 102-09106-17 Tube & Flange (*6785) 1 12 Plug Seal (*21124) 27 102-09106-32 1 Cap Screw % -16 x 3/4" 2 13 38 102-09106-33 Seat, Check (*859) 1 1 102-09106-18 Horn Brush Kit (*6414) 14 1 39 102-09106-34 Ball, Steel (*18026) 1 102-09106-19 Connector (*21173) 15 Spring, Compression (*857) 1 40 102-09106-35 1 102-09106-20 Drive (*5126) 16 41 102-09106-36 Pin, Centering (*15) 1 1 102-09106-21 Plate (*5414) 17 Seal Kit (*5140) (Incls.

42 102-08077-16 2 Gear Set (*5664-8)

18 102-09236-10 24, 26, 31, 36) 1 1 19 102-09236-11 Spacer (*5178) Feb. '73 1 102-09106-24 Spline (*5213) 20 1 102-09106-25 Cap, End (*6481) 21 *Char-Lynn Co. part numbers.

Cap Screw 12 pt. x 3" (*5389-14) 7 102-09236-12 22 **Parts Included in Seal Kit, item 42.

102-09236-13 Cap Screw 5/5 "-18 x 5/8 "(*21046-1) 4 23 ***Parts Included in Control Kit, item 32 — 1 Oil, Seal ** _ - - 24 Not Sold Separately.

102-09106-26 Plate, Valve Housing (*843) 1 25

Item Part No. Number

Description

Always Give Serial Number of Machine

Rex 111

STEERING CYLINDER

469-37

STEERING CYLINDER — CROSS 3" BORE x 20" STROKE Item No.

Part Number

Description

No. Req'd.

Hydraulic Cylinder (*230200 NWFAA) 1 1 102-03400-11 Nut (*1A0146) 1 102-03725-03 Head Cap (*1C1528) 1 102-03725-04 Head (*1C1648) 1 102-03725-05 Piston (*2C2624) 1 102-03725-06 Rod (*1C9679) 1 102-03725-07 Tube Assy. (*1C9678) 1 102-03725-08 Ret. Ring (*1A0004) 3 102-03400-24 Cap Screw (*1A0300) 2 102-03725-11 "0" Ring (*1A0003) 1 102-03725-13 Seal — Wiper (*1A0019) 1 102-03725-14 "0" Ring (*1A0051) 1 102-03725-15. "0" Ring (*1A0020) 1 102-03725-16 Back-up (*1A0147) 2 102-03725-17 Seal BaCk-up (*1A002) Mar. '73 102-03725-01

2 3 4 5 6 7 8 9 10 11 1-2.'

13,, 14 15

*Part Numbers are Cross Manufacturing, Inc.

Always Give Serial Number of Machine

Rex 111

WATER TANK & PIPING

469-38

Item No.

Part Number

1 2 3 4 5 6 7 8

502-06299-80 102-09290-01 298-19030-86 102-30219-01 102-30218-01 102-30224-01 102-30223-01 102-30212-01

9 10 11 12 13

398-99006-31 398-14006-87 102-08224-17 298-09048-86 102-06440-01

14 15

102-03966-01 398-14008-24

Description Water Tank Spacer, Tube Tee, Socket, Spray Bar Side Cover, Water Tank Top Cover, Water Tank Gauge, Water Tank Shim, Tank Strainer, Water Tank, #80 Mesh Screen 3/4 " x 3/8 " Red Bush. Galv. x 1 1/2 " Nipple Toe Galv.

Hoses/8 " x 5" Lg. Clamp, Hose Pump, Jabsco (See Contents) Spray Bar, Front 3/4" x 34" x 34 Tee, Galv.

No. Req'd.

1 6 2 2 1 2 6 2 2 10 2 8 2 2 1

Item No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Part Number 398-14000-90 102-06438-01 398-14010-03 398-14009-01 398-14001-34 39844001-11 398-14010-23 102-08718-01 398-14005-22 102-09292-01 398-14009-46 102-08224-02 102-08899-01 298-01014-04 102-08224-05 102-08224-03 502-08119-80

Description

No. Req'd.

4 34 " Pipe Cap, Galvanized 16 Nozzle, Spray 2 1'4.. Pipe Plug, Galv.

2 3/4 " Close Nip., Galvanized 5 34 Straight Ell, Galv.

2 3/4 " x 90° Elbow, Galv.

2 '4" x 8" Nipple Toe Galv.

1 Bracket, Tee 1 38" Tee, Galvanized 2 Spray Bar, Rear 2 34" x 34" Red Cplg., Galv.

2 Hose 54" I.D. x 38" Lg. "U" Bolt, Pump 4 4 "U" Bolt, Spray Bar Hose 5/8 " I.D. x 74" Lg. 1 1 Hose 54" I.D. x 65" Lg. Cable, 8 Ft., 2 Wires 2 June '73

Always Give Serial Number of Machine

Rex

111

_WATER PUMP — JABSCO

Item No.

Part Number 102-06440-01

1 2 3 4 5 6 7 8 9 10 11 12

102-06440-11 102-06440-12 102-06440-13 102-06440-14 102-06440-15 102-06440-16 102-06440-17 102-06440-18 102-06440-19 102-06440-20 102-06440-21 102-06440-22

Description Water Pump (Jabsco #8860), incls. the following: Screw (*SP1002-09) End Cover (*8865) Model 8860 Gasket (*7828) Impeller (*1414-37) Screw, Cam (*SP1002-01) Cam (*8089) Seal (*SP3000-10) Body (*7824) Slinger (*6342) Screw (*SP8019-02) Motor, Model 8860 (*SP8012-02) Service Kit, incls. items 1, 3, 4, and 7 (*8860-SK92)

No. Req'd.

1 3 1 1 1 1 1 1 1 1 2 1 1

*Part No's. are Jabsco, Costa Mesa, California.

Always Give Serial Number of Machine

Rex 111

469-39

469-40

TIRE SCRAPERS

RIGHT HAND - REAR

RIGHT HAND - FRONT

Item Part No. Number 562-04737-80 2 203065 3 398-20000-82 4 502-04649-80 5 398-03000-23 {102-30254-01 6 102-08707-01 7 102-08678-01 8 502-08020-80 9 202344 02-04736-81 1015502-04736-80 02-04666-81 11 :5 502-04666-80 12 298-08009-04 13 398-08000-22

Description

No. Req'd.

2 4 12 2 4 Cotter Pin 34 6 " .x 11/2" 4 Blade, Scraper, Steel Tire 4 Blade, Scraper, Rubber Tire Retainer, Scraper 4 Bracket, Spring Hanger, R.H. & L.H. 2 Spring, Tension, R.H. & L.H. 4 1 Bracket, Scraper, Front R.H. 1 Bracket, Scraper, Front L.H. Bracket, Pivot, Front R.H. 1 1 Bracket, Pivot, Front L.H. 2 Eye Bolt 546 " Lube Fitting #1792 2 June '73 Bracket, Scraper, R.H. & L.H. Spring, Compression Cut Washer 1" Bracket, Pivot, Rear, R.H. & L.H.

Always Give Serial Number of Machine

Rex 111

TIRE WETTING SYSTEM — FUEL OIL

Item No.

Part Number

1 502-04836-80 2 102-09381-01 3 102-01458-01 4 298-00123-47 5 298-00015-97 6 102-06438-01 7 298-00081-01 8 102-08275-04 9 298-00087-01 10 102-08275-02 11 398-14000-10 12 298-00046-98 13 102-30242-01 14 398-14001-96 15 298-00101-53 16 398-14006-79 17 2556-8 18 298-09043-86 19 398-14001-31 20 102-09169-01 21 102-09171-01 22 298-06524-17 1298-06123-17 23 298-00052-17 X7987

Description Frame, Mat Hook, Frame Wiper, Mat Hog Ring Washer, Special Nozzle, Spray Elbow, Male Tube 1/4" O.D. x 78" Lg. Tee, Male 1/4" Tube 1/4" O.D. x 30" Lg. Red. Bushing 1/2" x 1/4" Valve, Solenoid Bracket, Valve Close Nipple 14" Valve, Needle Nipple 14" x 11/2" Toe Hose 14" x 41/2" Lg. Clamp, Hose Street Elbow 1/4" x 90° Trip, Switch Bracket, Switch Micro Switch Switch, Toggle Seal, Toggle Grommet

Always Give Serial Number of Machine

No. Req'd.

2 2 4 40 4 2 2 1 1 1 2 1 1 1 1 2 1 2 1 1 1 1 1 1 2 June '73

Rex

111

469-41

manufacturers of:

Truck Mixers Airport and Road Forms Slip-Form Road Pavers Concrete Spreaders Concrete Finishers and Floats Sub-Graders Conveyors Road Batch Plants Central Mix Plants Dry Batch Plants Automation Soil Stabilizers Steel Wheel Rollers Soil Compactors Sanitary Landfill Compactors

Rexnord I1 1 1 1 1 1

Rexnord inc.

Construction Machinery Group, Milwaukee, Wisconsin 53201

International Offices: Milwaukee, New York, San Juan, Bogota, Sao Paulo, Caracas, Tokyo, Singapore, Sydney, Johannesburg, Heidelberg.

Cable Address: "REXINTER" Printed in U.S.A.

Distributors in All Principal Cities of the World

B&C