Rex Rollers SP950 Parts Book Manual #477 - PDF DOWNLOAD

477 BULLETIN NO.MUM MODEL SP950 VIBRATORY ROLLER SERIAL NO. 95HX NEW 10/77

Rex

III

construction machinery

Index Bulletin No. 477 (New Oct. 77) Model SP950 Self Propelled Vibratory Roller Effective Serial No. 95HX505 Fische & Grid No.

Description

Page Number

Control Console Assembly Controls Hydraulic lines Speedometer Wiring Diagrams

20 thru 32 20, 26 20 32 28, 30

Fluid System Fuel Oil Tire Wetting Pump Strainer Tank & Piping

55 49 52 50

Frame, Housings, Guards

57

Power Unit Air Cleaner Battery Controls Engine & Mount Hydraulic Pumps Muffler Wiring Diagram

1 1 1 1 1 1 7

Roll Over Protection

56

Steering Components Articulating Joint Cylinder Hydraulic Pump Valve

37 33 23 24

Traction Drive Differential Drive Train Hydraulic Lines Hydrostatic Motor Hydrostatic Pump Two Speed Transmission Wheel Options

15 9 19 12 6 13 17

Vibration Drive & Controls Control Cylinder M.D.F. (in roll) Hydraulic Motor — Drive Hydrostatic Pump — Drive Hydraulic System — Drive Hydraulic System — M.D.F. Roll Transducer Assy.

Variable Volume Hyd. Pump

45 46 48 34 38 41 47 40

Always Give Serial Number of Machine

Regamd Rexnord Inc Milwaukee, WI 1111111

II

53201

Always Give Serial Number of Machine

(C) F ISCH E N O.

477-1 (New 10177)

7

HI

Specify Quantity,

4

_ .„

4it

■11,

Part Number and Description When Ordering

SpecifyQuantity, Part Numberand Description When Ordering

EFFECTIVE SERIAL NO. 90HX OR 95HX505 AND UP Item No. I

Part Number 102-9906-1

Description

No. Req'd.

G.M. Die'sel Engine Series 3-53 Model 5033-7201 Including the Following Features (Listed for Convenience Only — (Always Refer to Option Plate on Valve Rocker Cover and to Engine Parts Book for Definite Identification Flywheel SAE #4 for use with Rockford 11TT Clutch Flywheel Housing SAE #4 Governor, Variable Speed with Closed Linkage Set at 2450 RPM No Load Fan — 18" Dia. Suction 5 Blade (6K1-469) Air. Inlet Housing for Remote Mounted Donaldson H.D. Air Cleaner Lube Oil Filter, F.F. Mounted on Oil Cooler • Exhaust Manifold — Side Outlet (5146215) Water Connection — Less Radiator Connection Battery Charging Alternator 12 Volt — 42 Amp. Starting Motor, 12 Volt Sprag Oil Pan, Shallow, for 10 Degree Operation Oil Pan Dipstick, for 10 Degree Oil Pan Breather, on Flywheel Housing Plain Rocker Cover with Oil Filter on Side Injectors N50

Item Part No. Number.

No. Req'd.

Exhaust Outlet Flange — 3" Pipe Threads Oil Cooler — Engine Only C. S. Pulley — 2 Groove — Cone Drive (5126687 (6K1A-153) Tachrometer Drive Mtd: on R.H. Balance Shaft when Viewing Engine from Flywheel End, 90° Adapter, 1 to .500 Ratio , Air Inlet Housing Gasket 5124405 Emergency Shut Down 5186687 (Plate) Pull to Stop Nameplate 5184255 Start Nameplate 1567238 2 Gasket — Air Inlet Housing (General Motors Part No. 5124405) 3 Spacer — Engine Front Support 102-9096-1 4 298-5515-68 Rubber Engine Mount Center Bonded — for 1/2 " Mounting Bolt 2" O.D. x 1 3/s " Assembled Thickness, 1 1/4 " Dia. Mounting Hole (Lord #J-6256-3) 4 5 502-4755-80 Front Engine Support 1 6 398-2002-33 Cap Screw 1/2 x 3" U.N.C. 2 7 398-2002-42 Cap Screw 1/2 x 5" U.N.C. 2 8 X203740 Flange Yoke — (Spicer 2-2-329) 1 9 X203741 Snap Ring (Spicer 2-7-29) 2 4398-20000-27 Cut Washer 5/8" 4 10 398-2002-57 Hex Head HC-HT Cap Screw 5/8 x 1 3/4" 4 298-41-93 Cap Screw 3/8 x 1" — SAE Grade 8 4 11 4 {398-20000-37 Lock Washer 3/8" 12 102-9393-1 End Yoke (Dana #2-4-834) 1 rX8005 "U" Bolt 2 13 -1398-20000-64 Lock Washer 5A 6 " 4

1 (Con t'd.)

1

Description

..... • • • •

(C) FISCHE NO. 7 GRID A-2

AlwaysGiveSerial Numberof Machine

SELF PROPELLED ASPHALT HANDLING VIBRATORY ROLLERS - (MODEL 900 WITH SINGLE FORCE ROLL, MODEL 950 WITH MULTIPLE DYNAMIC FORCE ROLL) POWER UNIT AND ADJUNCTS, (AIR CLEANER, MUFFLER AND MOUNTING, STEERING AND MULTIPLE DYNAMIC FORCE VARIABLE VOLUME PUMPS, CONTROLS) TRACTION AND VIBRATION DRIVE HYDROSTATIC PUMPS AND MOUNTING

Part Item Number No. -(Coned.

13 1398-11000-18 102-9450-1 14

Description

No. Req'd.

4 Hex Nut 5 y 6 " U.N.C. Sundstrand Model 22-2052 Hydrostatic Pump (Propulsion) — 1 See Separate Illustration 4 Cap Screw 1/2 x 11/4" U.N.C. 398-2002-18 4 398-20000-25 Cut Washer 1/2" 15 4 398-20000-39 Lock Washer V2 1 Bracket — Propulsion Pump 502-6316-80 16 Exhaust Muffler (Nelson Muffler 298-5149-92 17 Corp. #T-14855) 1 Muffler Clamp — 31/2" (Maremont 298-205-47 18 Auto. Products No. X350) 3 Radiator Mounting Bracket 2 502-8114-80 19 Radiator & Shroud 1 102-6518-1 20 Radiator Cap — (Included in Item 20 1 298-5177-92 21 Auxiliary Fan Shroud 1 502-4765-80 22 Drain Cock (Imperial #201E) 1 298-20-98 23 Air Cleaner Bracket 1 *502-6328-80 24 Strip — Channel Rubber 1 X203699 25 Mounting Band — Air Cleaner — *298-5126-92 26 (Donaldson P4076) 2 Air Cleaner Hose 27 102-9125-2 3 Hose Clamp 3916 to 41/2" (Breeze 28 / 298-9026-86 Corp. Inc. #0S100-M64) 8 Air Cleaner — (Donaldson Cyclopac 4 102-9209-2 FW Series Model FWG 10-003) 1 Element for Air Cleaner (P11-8159) 1 102-9209-2 Gasket Washer for Air Cleaner — 102-9209-3 29 (Donaldson Part No. P18462) 1 Cup Gasket for Air Cleaner — 102-9209-4 1 (Donaldson Part No. P10-1401) 1 *502-4850-80 Tube — Air Cleaner 30 "

'

Item No.

Part Number

31

298-6509-68

,3

298-5054-92

398-17000-70 33 1398-11000-19 34 298-6085-17 35 36

102-6973-1 X202821

37

298-157-47

38

I

298-158-47 398-10000-48 298-146-47

39 40 41 42 43

398-10000-46 398-11000-16 298-263-47 102-30528-1 502-6494-80 298-5154-92 102-8704-1

44

(C) FISCHE NO. 7 GRID A-3

Description

No. Req'd.

Indicator — Air Filter — 1/8 x 1/8 Connector Fitting with Built-in Safety Filter (Bacharach Code No. 63-0039 Model 63-7001) Oil Cooler (Yates #RD-L-6556, General Radiator Inc. #0C-2409, Perfex #A18-953 or Equal) 1 Square Head Set Screw 3/3 " x 11/2" 4 Hex Nut 3/8" 8 Neutral Stop Switch (Cole-Herse 1 #9233) Nut — Neutral Stop Switch 1 Ball Joint 1/4 " (Tourek Type SR No. 1 SR107G) Bracket — Cable Clamp — (Morse #A21600) 2 Cable Clamp 1/2" for 43C Series Cable (Morse #A21227) _ 2 Rd. Hd. Mach. Screw 10-24 x 3/4" 4 Cable Clamp 1" Hole CenterS2 - 13/64 Dia. Holes for 30 Serie Cable (Morse #A31804) 1 Rd. Hd. Mach. Screw #10-24 x 5/8" 2 Hex Heavy Nut #10-24 6 Cable End 10-32 UNF Female — 1/4 - 28 Male (Morse A31126) 1 Bracket — Muffler Support 1 Pipe — Down Exhaust 1 Exhaust Extension (Stemco Mfg. Co. #27-10257) J 1 Vibratory Hydrostatic Pump — Model 22-2031 — (Used on Model 900) — See Separate Illustration

Always Give Serial Numberof Machine

SpecifyQ uanti ty, Part Numberand Description When Ordering

SELF PROPELLED ASPHALT HANDLING VIBRATORY ROLLERS (MODEL 900 WITH SINGLE FORCE ROLL, MODEL 950 WITH MULTIPLE DYNAMIC FORCE ROLL) POWER UNIT AND ADJUNCTS, (AIR CLEANER, MUFFLER AND MOUNTING, STEERING AND MULTIPLE DYNAMIC FORCE VARIABLE VOLUME PUMPS, CONTROLS) ' TRACTION AND VItRATION DRIVE HYDROSTATIC PUMPS AND MOUNTING EFFECTIVE SERIAL NO. 90HX OR 95HX505 AND UP (Continued)

4

"

(C) FISCHE NO. 7 GRID A-4

AlwaysGiveSerial N umberof Machine

SpecifyQ uantity, Part Numberand Description When Ordering

SELF PROPELLED ASPHALT HANDLING VIBRATORY ROLLERS (MODEL 900 WITH SINGLE FORCE ROLL, MODEL 950 WITH MULTIPLE DYNAMIC FORCE ROLL) POWER UNIT AND ADJUNCTS, (AIR CLEANER, MUFFLER AND MOUNTING, STEERING AND MULTIPLE DYNAMIC FORCE VARIABLE VOLUME PUMPS, CONTROLS) TRACTION AND VIBRATION DRIVE HYDROSTATIC PUMPS AND MOUNTING EFFECTIVE SERIAL NO. 90HX OR 95HX505 AND UP (Continued) No. Part item No. Part Item Description Description Req'd.

Number Req'd.

No. Number No. 398-20001-13 Cut Washer 1/2" S.A.E. Vibratory Hydrortatio PiThar — (For 102-10037-1 4 398-2001-76 Cap Screw 3/8 x 1" U.N.C. Model 950 Only) Note Service 7 44 56 Cap Screw 1/2 x 21/2" U.N.C. 1 398-2002-31 Parts are Identical to those used on (Cont'd.)

(Cont'd.) 398-2002-24 Cap Screw 1/2 x 1 3/4 " U.N.C. 2 102-8704-1 Above — Except 398-20000-25 Cut Washer 1/2" 102-4365-80 Control Valve and 3 298-2010-71 Self Locking Nut 1/2 - 13 U.N.C. Orifice are Replaced by 102-9748-1 McLean-Fogg-Uni-Torque) 3 Controller Pump 1 57 102-7949-1 Hydraulic Pump — Steering — Bracket — Steering Pump 1 45 102-4786-1 Constant Displacement — Vane Sheave — Steering Pump — 46 102-30614-1 Type — 7.5 GPM 1500 PSI (Used on Model 900 Single Force Relief — Manifold Type — R.H. Roller) 1 Rotation (Vickers . #VTM 42-6047 Not Used 75-15-MD-R1-14) See Separate Front Engine Support 1 502-4399-80 48 Illustration 2 Cap Screw 7A 6 x 1 1/4 " U.N.C. 398-2002-5 1 102-3680-1 Flange — Yoke Adanter Rear Engine Support (R.H.) — 1 "502-4257-81 58 398-2006-23 Socket Head Nylok d#p'Screw 5A 6 X 1" (Opposite of Illustration) 1 , (Secure with "Loctite Nut Lock") 4 Left Rear Engine Support — 502-4257-80 49 502-8128-80 Air Intake Adapter Tube (As Illustrated) 1 1 59 398-2001-58 Hex Hd. Cap Screw fYi 6 X 3A " 1 Cap Screw 1/2 x 11/2" U.N.C. 8 398-2002-21 60 102-9120-1 Radiator Hose — Upper 1 3/4" I.D. 1 8 398-20000-39 Lock Washer 1/2" 61 298-5701-68 1 .

Adapter Radiator Hose — 2" I.D. — Flexible J02-3283-1 Socket Head NylOck Cap Screw 13" Overall (General #218 or Equal) 1 50 398-2006-65 62 298-9027-86 Hose Clamp 1 1 ,/, to 23/4" 3/8 x 1 1/4 " (Heat Treated) 6 (Breeze #OS100M_36 e or Equal) 4 Drive Plate 1 102-5164-1 51 '63 298-92-47 -cup up 0.3764 Cup - Dia., 1/8 - 27 Hub 1 402-624-2 52 NPT, 11.46 Overall Height Spring Drilled Cap Screw 511 6 x 3/4 " — _1102-7362-1 Loaded Cover (Gits #1003-S28) 1 6 HC-HT 53 64 398-14001-28 Street Elbow 1/2 x 90° 1 6 398-20000-64 Lock Washer 5A 6 65 502-4625-80 Bracket — Throttle and Governor Joint — Center Bonded — (Lord 102-7361-1 54 Pull to Stop Cables 1 12 #JA-6250-1) 66 502-2980-80 Control Arm — Governor Throttle 1 Drilled Cap Screw — 5/16 x 1 3/4 102-7360-1 55 67 298-6543-17 Solenoid Switch 12 Volt — Grounded HT-HC 12 (Cole-Hersee #24037) Ignition 1 Adapter Plate — Hydraulic Pump 1 56 _1.102-3666-1 68 102-9439-1 Trip for Switch 4 H.T. Cap Screw 1/2 x 11/2" U.N.C. 1398-2002-22

SpecifyQuantity,Part Numberand DescriptionWhen Ordering

Item No.

Part Number

SELF PROPELLED ASPHALT HANDLING VIBRATORY ROLLERS (MODEL 900 WITH SINGLE FORCE ROLL, MODEL 950 WITH MULTIPLE DYNAMIC FORCE ROLL) POWER UNIT AND ADJUNCTS, (AIR CLEANER, MUFFLER AND MOUNTING, STEERING AND MULTIPLE DYNAMIC FORCE VARIABLE VOLUME PUMPS, CONTROLS) ' TRACTION AND VIBRATION DRIVE HYDROSTATIC PUMPS AND MOUNTING EFFECTIVE SERIAL NO. 90HX OR 95HX505 AND UP (Continued) . ..

Item Part No. Description No. Number.

Req'd.

Lever — Pump Control 69 102-9440-1 Bracket 70 502-4864-80 Cap Screw 1/4 x 1 1/4 " U.N.C. 398-2001-48 Lock Washer 1/4 " 398-20000-36 71 .1 Limit Switch 98-6547-17 " 02-9636-1 Arm and Roller Only for Service 72 F (Included in 298-6547-17)

"U" Joint 73 291251-48 Air Intake Tube 74 102-10186-1 Adapter — Union 1A " Male 298-2071-62 75 NPT x 1/4 " Female — 90° (Anchor #4MA-4UFS)

Fuel Line (Suction) 6 ft. lg.

76 502-1341-90 398-14000-13 Outside Hex Mall. Pipe Bushing 77 1/2 x 3A3" 502-2786-80. Hose Assembly — Return Fuel Line 78 Outside Hex Bushing % x 1/4" 398-14000-5 79 Rod End Female — " Bore -298-276-2 80 1/4 - 28 NF Thread — (Sealmaster #FR-4) (Model 950 Only) Control Cable — Vibration Pump 102-8672-7 (Morse 43BC114) 114" lg. — Model 900 Only as Illustrated Control Cable -- Manual Over-ride 102-7245-12 81 for Vibration Pump — Model 950 Only (Morse Part No. 33BC120) 120" lg. ..

Ball Joint #10-32 U.N.F. — Used in 298-135-47 82

83

102-7554-5

Place of item 80, Model 950 Only Control Cable — Direction (Morse Part No. 43B168)

1 1 4 4 1 1 1 1

84

102-8642-1

1 85

102 7957 6

86 87 88

102-8022-1 102-7958-1

89

102-9815-1

90 91

102-10034-1 102-30480-1

92

298-7081-91

93

102-7253-1

1 1 1 1 2 )

-

-

102 30481 1 -

-

1

1

102-8523-1 102-8523-3 298-3255-17

94 1 95

1 1

96 97 4 98

502-6423-80 102-7957-2

99

298-5092-92

298-7036-91

(C) FISCF NO. 7 GRID A-5

Description

No. Req'd.

Throttle Control Cable -- 30M Series Vernier Control (18 Turns) Black Knobs Control and Brake, Part No. D44194, Clamp Type — Threaded End 10-32 NF-3 with Boot #A45477 1 "Pull to Stop" Cable (Morse B48701 Cable with B42978-1A Red "T" Handle) 1 Cable Mount (Emergency Stop) 1 1 Clamp — Cable Bracket (Hyd. Pressure Compensating Pump) (Model 95 Only) 1 Pump — Variable Volume, R.H. Rotation, (Hydraulic Components Divn. #PVQ-PSEJ-06ERM) (Model 950 Only) — See Separate 1 Illustration Sheave, Single Groove (Model 950 Only) 1 Sheave — Hydraulic Steering (Model 950 Only) "V" Belt — "A" Section 28" Outside Circumference (Gates Rubber Co. A26 or Equal) (Model 950 Only) Cable Brake (Morse #A44386-60 Series) Battery Cable 73" Long Battery Cable 96" Long Battery — 12 Volt — 4D — Diesel Start — Amp Hr. 170 (Delco #759, Exide D-4D4939 or Equal Battery Box Cable — Emergency Stop (Morse B48701) "V" Belt — Fan & Steering Pump (Maurey A48) Air Cleaner Elbow (Rubber) 90°

1 1

3 1

1

1 I 1 1 1

Rexnard

Always Give Serial Number of Machine

111111111111

Rexnord Inc Milwaukee. WI 53201

477.6 (New 10/77)

HYDROSTATIC PUMP — TRACTION DRIVE SUNDSTRAND MODEL NO. 22-2124 REX PART NUMBER 102-9450-1 MODEL SP848, 900 AND 950 VIBRATORY ROLLERS Item No. 1 2 3 4 5 6 7 8 9 I0 II 12 13 14 15 16 17 18 19

Part Number 102-4365-4 102-4365-6 102-4365-7 102-4365-11 102-4365-12 102-4365-1

102-4365-47 102-4365-52 102-4365-48 102-4365-50 102-4365-51 102-4365-46

Description Control Valve Gasket — Control Valve Charge Pump Gasket — Charge Pump Check Valve Seal Kit (Contains Items 7 thru I I Shaft Seal Housing Seal Seal Spring "0" Ring "0" Ring Retaining Ring Charge Pump Relief Valve Poppet Cotter Pin Reference Only — (Pin) Washer Reference Only — (Orifice) "0" Ring Control Shaft Handle

—

No. Req'd.

1 1 1 1 1 Not Sold Separately)- 1 1 1 6 2 1 3

3 1

Note — Do not attempt repairs beyond parts listed above — Rebuilt — fully warranted pumps and motors are available from stock at special exchange prices.

(C) FISCHE NO. 7 GRID A-6

Specify Quantity, Part Number and Description When Ordering

BLUE

CD 0 Ai

I SOLENOID

START BUTTON

KEY SWITCH

STARTER 1

BLACK YELLOW

12 VOLT BATTERY

tal CA

9

Li

NEU. SWITCHES SENDING UNIT FUEL TANK

5'

PURPLE

1:077:

ALTERNATOR

GM 3-53

ENGINE

(C) FISCHE NO. 7 GRID A-7 .4111011 ■..

co n st ructi onma ch i n ery

OIL SENDING UNIT

TEMP SENDING UNIT

[51 auppeNJO laqumN ferias aArD sAemly

Item No. 1

2 3 4 5 6 7 8 9

i

Part Number

102-30428-1 298-6540-17 102-9790-1 102-9791-1 298-3255-17 203027-1 203027-2 102-4375-1 298-86-17

Description

Wire Set Field Switch Wire Wire Battery — 170 Amp. Wire Wire Instrument Cluster Connector

Req'd.

i

const ructi onm ach i n ery

WIRING DIAGRAM — NEGATIVE GROUND ALTERNATOR 900, OR 950 SELF PROPELLED VIBRATORY ROLLERS

1 1 1 1 1 2 2 1 1

z c 0 63

(C) FISCHE NO. 7 GRID A-8

(C) FISCHE NO. 7 GRID A-9

Part Number

Item No. 1

SpecifyQ uantity,PartNumberand Description When Ordering

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Rex

32 33

No. Req'd.

Description

Differential Assembly — Reference Only — See Separate Illustration H.T. Cap Screw 1/2 x 2" 398-2002-28 398-20000-39 Lock Washer 1/2 " Oil Seal (National 410082) 298-3115-68 Shim (.020" thick) 58183-20 Gear Box 502-6457-80 H.T. Cap Screw 3/4 x 2" 398-2005-37 Hardened Washer 3/4 " 298-36-97 Cap Screw 3/4 x 1" 398-2002-89 Shaft — Pinion Gear 402-4803-1 Bearing Cup (timken No. 28622) 298-349-2 Bearing Cone (timken No. 28678) 298-350-2 Spacer 102-9822-1 Shim (.005") as required 58183-5 Shim (.007") as required 58183-7 Shim (.020") as required 58183-20 Cover 102-30479-1 H.T. Cap Screw 1/2 x 1 3/4" 398-2002-25 Cover with Oil Level Hole 502-8343-80 398-14005-76 Square Hd. Pipe Plug 3/4 " Spacer 102-9798-1 Bearing Cup (timken JM714210) 298-351-2 Bearing Cone (timken JM714249) 298-352-2 Axle Shaft 102-4780-1 Gear — 43 Teeth 402-2639-2 Spacer 102-9800-1 Retainer — Bearing 102-30455-1 Shim (.020") 58486-20 Oil Seal (National 415011) 298-3114-68 Wheel Hub 402-1768-2 Straight Key 5/8 x 5/8 x 2 1/2" 398-6001-87 Washer 102-9802-1 Lock Nut (ESNA #49NTE-242) X202866 11/2 " — 12 NF — 3 Hub Can 298-4006-47 Shim (.005") as req'd.

58486-5 Shim (.0075") as req'd.

58486-7 Shim (.020") as req'd.

58486-20 502-6475-80

1 8 44 2 2 2 8 8 4 2 4 4 2 6 6 4 2 32 2 6 2 4 4 2 2 4 2 2 2 2 2 2 2 2 10 6 6

Part Number

Item No. 34 35 36 37 38 39

40 41 42 43 44

102-30459-1 398-2001-77 398-20000-37 102-9816-1 502-6459-80 502-4986-80 398-2002-57 398-11000-23 398-20000-41 398-20000-27 102-9726-1

45

102-9726-10 102-9726-11 102-9726-12 102-9726-13

102-9726-20 102-9726-14 102-9726-15 102-9726-16 102-9726-17 102-9726-18 102-9726-19

46

102-9726-21

(C) F I SCH E NO. 7 GRID A-10

Description Cover — Gear Box H.T. Cap Screw 3/3 x 1" Lock Washer 3/4 " Spacer Strut — Gear Box & Motor Mount Support — Disc Brake H.T. Cap Screw 5/8 x 1 3/4" Nut 5/8" Lock Washer 5/8" Cut Washer 5/8" Disc Brake Mechanical Caliper (H. H. Products No. 00-04270) Consisting of items 45-46 & 47 Cam Side Subassembly (H. H. Products No. 99-04306) Consisting of: Pix (H. H. Products No. 33-04305) Cam Side Housing (H. H. Products No. 99-02564) Pad Holder (H. H. Products No. 99-06212) includes Friction Material and Pad Holder Assembled Friction Material (566 sintered) (H. H. Products No. 57-00306) Spring — Pad Retainer (H. H. Products No. 06-03356) Pin, Push (H. H. Products No. 05-05790) Cam (H. H. Products No. 18-02918) Washer (H. H. Products No. 03-02772) Jam Nut (H. H. Products No. 66-04953) Cotter Pin (H. H. Products No. 05-04167) Carrier Side Subassembly (H. H. Products No. 99-06214) Consisting of:

No. Req'd.

2 16 16 4

1 1 4 4 4 4 1 1 1 1

1 1 1 2 1 1 2 2

1

Always GiveSerial Numberof Machine

TRACTION DRIVE TRAIN AND AXLE MOUNTING MODEL SP848, 900 OR 950 VIBRATORY ROLLERS

TRACTION DRIVE TRAIN AND AXLE MOUNTING — (Continued) MODEL SP848, 900 OR 950 VIBRATORY ROLLERS

SpecifyQuantity,Part Numberand Description When Ordering

Part Number

Item No.

102-9726-22 102-9726-23

46 (c „n e (I )

102-9726-13

102-9726-20 102-9726-14 102-9726-19 47

102-9726-24

48

52

298-90-93 298-2059-71 102-30533-1 398-2005-20 1398-11000-21 1398-20000-38 298-6075-91

53

102-7322-10

54 55

298-6076-91 398-2004-83 {398-20000-38 398-11000-21 102-8506-1

49 50

51

56

57 58 59 60 61

-

T398-2005-88 1398-2001-13 298-4037-47 298-5-71 .F. 102-9803-1 1 0 33 =23 1 00 22 :9988 0

62 98-2004-31 63 _ 398-20000-28

No. Req'd.

Description Pix (H. H. Products No. 33-04307) Carrier Side Housing (H. H. Products No. 12-02544) Pad Holder (H. 13', Products No. 99-06212) includes Friction Material and Pad Holder Assembled Friction Material (566 sintered) (H. H. Products No. 57-00306) Spring — Pad Retainer (H. H. Products No. 06-03356) Cotter Pin (H. H. Products No. 05-04167) Ferry Hd. Cap Screw 1/2-13 x 3" long (H. H. Products No. 66-04540) Cap Screw 5/8 x 51/2" Lock Nut 5/8" Disc — Brake, Speedometer H.T. Cap Screw 7,46 X PA Nut 7/16 ' Lock Washer 1/4 " "U" Joint Assembly (Dana 9012-SF) Journal & Bearing Kit — (included in item 52) Companion Flange H.T. Cap Screw 7/16 x 11/4 " Lock Washer 7//16 Hex Nut — 7/16 " Hydrostatic Motor — (Sundstrand Model 22-3055) Nylok H.T. Cap Screw 1/2 x 1 3/4" S.A.E. Cut Washer 1/2" Wheel Stud (Motor Wheel Co. No. 83589) (Electric Wheel Co. No. FS15262) (Budd No. 43806) Nut — 3/4-16 NF (Budd No. 37888) Shim (22 Gauge) — as required Shim ((1128 ___.

— rreeqquuiirreedd Gauge) as required H.T. Cap Screw 3/4 x 2 1/4 Cut Washer 3/4" "

"

1 1

1 1 1 2 3 2 2 1 4 4 4 1 2 1 4 4 4 1 4 4 16 16 6 6 2 2

Item No.

Part Number

Description

...

Lock Nut 3/4" UNC "U" Bolt 3/4 " Lock Washer 3A " Wheel (Model 850 only) Disc Wheel (Model 900 and 950) 67 Rim Valve with Cap — (Model 900 and 950) 298-6014-68 Optional 18:00 x 26 All Weather Tire (Model 850 Only) 68 Smooth Tread Tire 16.9-30, 6 Pr. 298-6055-68 Tubeless (900 or 950 only) Emergency Parking Brake Cable 102-30536-1 (Models 900 and 950 only) 69 Emergency Parking Brake Cable 102-30477-1 (Model 850 only) Clevis Pin 298-129-47 70 Bracket — Speedometer Pick-up 102-9917-1 71 Magnetic Pick-up — Speedometer 298-103-17 72 Cord Assembly 502-205-80 73 298-26031-17 Connector 74 Support — Motor Adaptor 102-30484-1 75 Transmission Assembly — Reference 602-8409-1 76 Only — See Separate Illustration Support — Transmission 502-4988-80 77 Screw (Shift Yoke Block) 102-7287-1 78 _ 398-99012-90 Wire .045 Dia., SAE 51430 Shift Block 402-649-2 79 Lever — Shift Block 502-4972-80 80 Nut 298-2035-71 81 HC. HT . Hex Head Cap Screw 3/4 x 3" _398-2004-64 82 Ball Joint X7733 83 - 398-11000-41 Hex Nut 1/2 " U.N.F. _398-20000-39 Lock Washer 1/2" Shift Rod 102-9727-1 84 Nut 298-2042-71 85 Rolloin 5/1 6 X 1 3/4 298-6000-34 86 Shift Lever 87 502-8323-80 er Shift Lever Aarainisih— 988098 x 25092280--438 73 3-29527-80 BW 64 65 66

298-2035-71 102-9804-1 398-2000-42 502-6430-80 502-4989-80 298-6056-68

"

91 92

398-20000-28 502-8455-80

(C) FISCHE NO. 7 GRID A-11

Cut Washer 34 Bracket for Shift Block "

No. Req'd.

6 2 6 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 4 2 1 1 1 1 1 21 2 1

0

cD

Rexnord

Rexnord Inc Milwaukee, WI 53201

477-12 (New 10/77)

Always Give Serial Number of Machine 11111111111

40r

ANAL/.

iff

FIXED DISPLACEMENT HYDROSTATIC MOTOR SERVICE PARTS REX PART NUMBER 102-8506-1 (SUNDSTRAND SERIES 22-3055) REX PART NUMBER '102-6123-1 (SUNDSTRAND SERIES 23-3008) MODEL 848- 900 OR 950 VIBRATORY ROLL TRACTION DRIVE

Item No. 1 2 3

Part Number 102-4365-78 102-4365-14 102-4365-1 102-4365-2 102-4365-21 102-4365-77

Description Manifold Assembly (Series 22 only) Manifold Assembly (Series 23 only) Seal Kit (Series 22 only) Seal Kit (Series 23 only) Relief Valve Assembly (Series 23 only) Relief Valve Assembly (Series 22 only)'

No. Req'd.

1 1 1 1 1 1

NOTE: Rebuilt - fully warranteed pumps and motors are available from stock at special exchange price.

(C) FISCHE NO. 7 GRID A-12 Specify Quantity, Part Number and Description When Ordering

111

Rexnord 477-13 (New 10/77)

Rexnord Inc

Milwaukee, WI 53201

111111111 Always Give Serial Number of Machine

cc

CV

CO

'et

(C) FISCH E NO. 7 GRID A- 13

O

Specify Quantity, Part Number and Description When Ordering

No. Item

1 2 3 4 5 6

0 a,

a.

z 0

Part Number

Description

No. Req'd.

Item Part No. Number

1 1 1 2 4

32 X203519

Transmission Case Gasket Adapter Cap Screw 5/8 x 13/4 " U.N.C. Lock Washer 5/8" Cap Screw 5/8 x 2" — Heat Treated, U.N.C. Gasket — Countershaft Bearing Cover 102-3368-1 7 Cover — Countershaft Bearing 402-650-2 8 Heat Treated Cap Screw 3/8 x 1" 398-2001-77 9 398-20000-37 Lock Washer 3/E; 10 Gasket — Rear Bearing Cover 102-3370-1 11 Cover — Rear Bearing 402-646-2 12 Main Drive Gear 102-4818-1 13 Bearing Cone (Timken #397) — 298-344-2 14 2.3622" I.D., .8660" Wide Tapered Roller Bearing Cup 298-45-2 15 (Timken #394A) Keyed Washer (Timken #K91512) 298-10032-2 16 Lock Washer (Timken #TW112) 298-10030-2 17 Lock Nut (Timken #TN12) 298-10031-2 18 Ball Bearing (N.D. #1206) 298-253-2 19 Gear — Mainshaft Sliding 102-4817-1 20 Mainshaft 102-4428-1 21 Ball Bearing (N.D. #41309) 298-251-2 22 Snap Ring 1.625 I.D. x 2" O.D. x 298-8516-34 23 .093" Thick (Reliance Divn. of Eaton Mfg. Co. #974) Spacer — U Joint 102-3359-2 24 Companion Flange (Dana Corp.

25 298-6076-91 #3-1-3341) — Circular Type, 1.500-10 Spline

Nut — Main Shaft (Fuller No. 1846) 26 102-7286-1 Cotter Pin 1%8 x 2" 27 398-3000-18 28 398-20001-20 Cut Washer 15A B" x 2" x 11/64" Pipe Plug 3/4 " (Magnetized) 29 X7652 Snap Ring -- External — 1.452 298-8517-34 30 I.D. x 1.764 O.D. x .093 Thick (Reliance Divn. of Eaton Mfg. #916)

Spacer 102-3361-1 31 402-2596-8 102-30411-1 402-2621-2 398-2002-56 398-20000-41 398-2002-60

2 2 2 20 20

1 1 1

2 2

1 1 1 1 1 1 1

1 1

1 1 1 1 2 1 1

33 34 35 36 37

102-30598-1 102-3379-1 102-3360-1 402-659-2 102-7293-1

38

298-3012-68

39 40 41 42 43 44 45 46 47 48 49 50 51 52 53

402-1663-2 102-3371-1 102-7284-1 102-3372-1 398-10001-70 398-20000-64 X6326 102-7283-1 102-7290-1 102-3407-1 402-647-2 102-7287-1 398-99012-90 102-7299-1 298-3520-68

54

402-649-2 *102-8506-1

55

."*398-2005-88

p398-20001-13 56 *102-1781-1

Description

No. Req'd.

Bearing — Ball, Maximum Capacity Type, Medium Series 40 x 90 x 23 M.M. (Fafnir #308WD, MRC #308MF, N.D. #7608, SKF #308AZ) Low Countershaft Gear Shaft — (Countershaft) Spacer Gear — Countershaft Drive Nut — Countershaft Front Bearing (Fuller #8337) Oil Seal — Garter Spring Type 2 1/4" Shaft Dia. 3.355 O.D., 1%2" Wide (Sirvene — Type W4 — #22511) Cover Gasket Cover — Hand Hole Gasket — Hand Hole Round Head Mach. Screw 51 B x 1/2 " Lock Washer Bearing Ball 1/2•" Spring Plug Bar — (Shift Rail) Yoke — Shifter Lock Screw Lock Wire (.045 Dia. SAE 51430) Thimble — Oil Retaining "0" Ring 1/8 x 3/4 x 1" (National # 622715) Shifter Block Hydrostatic Motor — Sundstrand Model 22 — 3055 (See Separate Illustration) Nylok HC-HT Cap Screw V2 x 1 3/4 (Motor to Case) Cut Washer 1/2" Gasket

*Parts not included in 602-8409-1 two speed transmission assembly.

(C) FISCHE NO. 7 GRID A-14

2

1 1 1 1

1

1 1 1 1 1 4 4 1 1 1 1 1 2 2 1 1

1

1 4 4 1

Always Give Serial Numberof Machine

TRACTION DRIVE TWO SPEED TRANSMISSION ASSEMBLY PART NO. 602-8409-1 USED ON SP848-900 OR 950 VIBRATORY ROLLERS

itexnard Rexnord Inc

Milwaukee, WI 53201

11111111111 Always Give Serial Number of Machine

( C) FISCH ENO. 7GR ID

477-15 . (New 10/77)

Specify Quantity, Part Number and Description When Ordering

Item No. 1

102-9795-10

2

102-9795-11

3 4 5 6

No. Req'd.

Description

102-9795-12

7 8 9 10 11 12

102-9795-13' 102-9795-14 102-9795-15 102-9795-17

13 14

102-9795-22 102-9795-16

15

102-9795-23

16

102-9795-21

Drive Gear and Pinion Assembly Kit Consisting of Items 2 thru 13 (*706048-7X) Kit — Innner Pinion Bearing (*706060X) Shim — Drive Pinion Adjusting (Reference Only — Sold Only in 102-9795-10 Assembly Baffle — Pinion Bearing (Reference Only — Sold Only in Kit Form) Shim -- Pinion Bearing Adjusting (Reference Only — Sold Only in Kit Form) Kit, Outer Pinion Bearing (*706045X) Slinger — Pinion Bearing Outer (Reference Only — Sold Only in Kit Form) Seal — Pinion (*35725) Washer — Pinion Nut (*30275) Nut -- Pinion (*30271) Gasket — Carrier Cover (*34687) Shim — Differential Bearing (Reference Only — Sold Only in Kit Form) Bolt — Drive Gear (* 30266) Companion Flange Assembly (*3-1-4031) Kit — Differential Case Assembly Consisting of Items 11 thru 13 and Items 16 thru 27 (*706050X) Kit — Differential Bearing (*706047X)

Part Number

Item No. 17

1

18

1

19 20 21

1

22 23 24 25 26 27

102-9795-26

28

102-9795-24

29

102-9795-25

30

12 1

31 32 33

102-9795-18 102-9795-19 . . . ......

34 35

102-4803-1 102-9795-20

1

1

(C) FISCHE NO. 7 GRID A-16

Description Flange Half — Differential Case — Not Sold Separately Cap — Differential Case (Not Sold Separately) Shaft -- Differential (Not Sold Separately) Pinion (Not Sold Separately) Gear — Differential (Not Sold Separately) Ring — (Not Sold Separately) Plate — (Not Sold Separately) Disc — (Not Sold Separately) Disc — Dished (Not Sold Separately) Plate — (Not Sold Separately) Bolt — Differential Case (*35104-2) Kit — Differential Parts — Consisting of Item 11 and 19 thru 26 (*706057X) Kit — Gear Carrier Cover — Consisting of Item 11 and Items 30 thru 32 (`706059X) Cover — Carrier (Not Sold Separately) Plug — Cover (* 36472) Bolt — Carrier Cover (*34822) Differential Case (Sold Only as Complete Assembly Part No. 502-6475-80 — See Heading) Shaft -- Pinion Gear Bolt — Bearing Cap (*500400-20)

No. Req'd.

1 4

2 2 2 1

8

1

10

2 4

*Spicer Axle Division, Dana Corporation Part Numbers

Lie u w ow u o!43ruo u o,

auppeN zaciftunN repos amp sifentry

DIFFERENTIAL ASSEMBLY REX PART NUMBER WITH AXLES AND TUBES 502-6475-80 REX PART NUMBER WITHOUT AXLES AND TUBES (102-9795-1 DANA CORP. PART NUMBER WITHOUT AXLES AND TUBES 27943-28X MODEL 848-900 OR 950 SELF PROPELLED VIBRATORY ROLLERS

Remold Rexnord Inc Milwaukee, WI 53201

1111111111 I Always Give Serial Number of Machine

(C) FISCH E NO. 7GRID A- 17

477-17 (N ew 10/77)

Specify Quantity, Part Number and Description When Ordering

SpecifyQ uantity, Part N umberand Description When Ordering

Item Part No. Number 1 2 3 4 5 6 7 8 9 10

502-8082-80 502-8081-80 298-131-47 502-7107-80 102-4518-1 102-3655-1 102-3818-1 102-3819-1 102-3820-1 602-10478-1

11 12 13

298-6055-68 298-6056-68 502-4989-80 298-3255-17 298-316-47 102-8830-1

502-223-80 14 402-1749-1 15 502-8159=80 16 _ 502-6423-80 17 18 _ 102-8523-1 _ 102-8523-3 19 502-6497-80

20

102 9867 1 ' -

-

Description Pin, Steering Lock Steering Safety Lock Hair Pin Frame — Vibratory Roller Cover — Roll Shaft Cover — Frame End Bar — Top Scraper Bar — Bottom Scraper Scraper — Rubber Smooth — Tubeless Tire Unit Including Wheels, Consisting of: (Optional) Tire — Smooth 16.9-30 Valve Wheel Battery Grease Gun Spray Touch Up Paint — Lime — 12 oz. Can Grease Tube (1 Carton) Nameplate — Rex Guide Battery Box Battery Cable 73" long Battery Cable 96" long Steel Rear Wheel — Optional Spray Bar for Steel Wheel Option --Used in Place of 102-9292-1 Spray Bar Pipe — See Water Tank and

No. Rey d.

Item No.

1 1 1 1 2 2 2 2 2

21

2 2 2 2 1 1 1 1 4 2 1 1 1

2

22 23 24 25 26 27 28 29 30 31

32 33 34

Part Number

Description

No Rey'd.

Scraper Blade for Optional Steel Wheel — Used in Place of 102-9449-1 Scraper Blade — Item 21 4 Scraper Blade — Rubber Tire Option 102-9449-1 — See Item 20 4 502-4737-80 Scraper Bracket — Used on Steel or Rubber Options 2 Compression Spring (Both Options) X203065 4 398-20000-82 Cut Washer 1" (Both Options) 12 502-4649-80 Pivot Bracket — Rear — Used on Steel or Smooth Rubber Wheel Options 2 398-3000-23 Cotter Pin 31 6 x 1 1/2 (Both Options) 4 102-8678-1 Retainer — (Both Options) 4 502-8020-80 Bracket — Spring Hanger (Both Options) 2 202344 Spring, Tension, R.H. & L.H. 4 502-4736-81 Bracket — Scraper — Front, R.H. — As Illustrated (Both Options) 1 502-4736-80 Bracket — Scraper — Front, L.H. — Opposite Side —(Both Options) 1 502-4666-81 Pivot Bracket, Front, R.H. — As Illustrated — (Both Options) 1 502-4666-80 Pivot Bracket, Front, L.H. — Opposite Side — (Both Options) 1 298-8009-4 Eyebolt 5/1 6 " (Both Options) 2 398-8000-22 Lube Fitting #1792 2 102-30532-1

Piping Illustration (C) FISCHE NO. 7 GRID A-18

"

Always Give Serial Numberof Machine

DRIVE WHEEL OPTIONS — TIRE & WHEEL SCRAPERS MODEL 900 OR 950 SELF PROPELLED VIBRATORY ROLLER

HYDRAULIC SYSTEM — TRACTION DRIVE

477.19 (New 10177)

To Cooler

To Vibrator Pump

Part Number

Description

1 2

102-03691-02 102-03688-02

Hose Assembly, 1" SAE x 42'/2 " Lg. Hose Assembly, 34" NPT to 1'4 6 " JIC x

3 4

502-02783-81 502-08005-80

Item No.

82" Lg. Hose Assembly, 74" JIC x 42" Lg.

Hose Assembly, '/2 " NPT to 'V JIC x 20" Lg. Elbow 74" x 45°

No. Req'd.

2 1

1

1 3 298-08118-86 1 298-08078-86 Straight Adapter, 74" NPT to 1 14 6 " JIC 102-9450-1 Hydraulic Pump, Traction (See Contents) 1 1 102-03849-03 Hose Assembly, 34" NPT x 30" Lg. 4 102-01594-04 "0" Ring, 1546" I.D. x 194 6 " O.D. 8 298-08033-86 Split Flange Clamp 1" 16 398-02005-56 Cap Screw %" x 1'4" 1 602-10051-01 Hydraulic Tank, incls. the following: 1 102-08418-01 Plate, Cover 1 102-07864-01 Gasket, Cover 12— 1 398-14000-91 Pipe Cap, 1" 1 398-14000-89 Pipe Cap, 34" 2 398-14006-19 Pipe Cap, '4" 1 13 102-08510-01 Tube, Hydraulic Tank 2 14 298-00133-53 Element, Filter 1 15 502-02733-80 Cover, Hydraulic Tank 1 16 102-07320-01 Cap, Filler 17 298 8001 89 Breather 1 June '73

5 6 7 8 9 10 11

—

-

-

(C) FISCHE NO. 7 GRID A-19

Always Give Serial Number of Machine

Rex

ui

...,,,

i..omeavans 41,I.V. '

. X,

.. ow ----,:: .-

,....... .....

1

777, _____ itt,-Tr,11114 ._!_.,

I .74 rzo A ra neArair/0/0/0/

.....„,,...,.....

...... uh.

■.4, .,...I • ..,

Always Give Serial Numberof Machine co n st ructi onma ch i nery

(C) FISCHE NO. 7 GRID A-20

Item No.

Part Number

Description

Item No.

No. Req'd.

Hose Assembly 1/2" x 136" 1 Horn 1 Cover — Console Extension 2 Cap Screw % x 1 1/2 " 12 Hose Assembly 75" lg.

1 Hose Assembly 96" lg.

1 Hose Assembly 180" lg.

1 Hose Assembly 108" lg.

1 Hose Assembly 37" lg.

4 Tee — Adapter — 37° 2 Steering Valve — Char — Lynn "Orbitrol" — See Separate Illustration 2 Straight Adapter 3/4 - 16" 0 Ring Male 11 298-8110-86 to 3/4 - 16 Male J.I.C. (Anchor #8-BCO) 8 Steering Wheel 1298-68-47 2 Nut — Steering Wheel 12 298-9-71 2 102-9148-1 Horn Button Kit 2 '13 298-278-47 Knob — Steering Wheel 2 14 102-30536-1 'Cable — Brake — Parking 1 15 502-8450-80 Bracket — Cables 1 16 502-6503-80 Operators Console (Reference Only) 1 17 502-8336-80 Brake Lever 1 18 298-80-47 Clevis Pin 2 19 402-1596-2 Pedal 2 20 102-30292-1 Hydraulic Cylinder — Steering (Green Mfg. Co. 73-386) See Separate Illustration 1 21 298-2171-62 Elbow — 90° 1/2 " NPTF x 34 " - 16 JIC (Anchor 8MA-8JMS) 1 22 298-8112-86 Elbow 45° 1/2" NPTF'x 3/4 - 16 J.I.C. 1 23 102-9767-1 Ball Stud 2 24 102-30437-1 Housing — Ball Stud 2 25 102-6806-8 __ Bushing 7- Radial 2 26 298-7527-34 Snap Ring — Internal (Truarc N5000-281) 2 Washer (3 Ply Fabreeka x I-A.6 " thick) 4 27> 102-9768-1 {59077 Special Washer ' 2 28 398-11000-87 Castle Nut 11/4 " 2 -

SpecifyQuantity,Part Numberand DescriptionWhenOrdering

29 30 31 32 33 34

1 102 3701 5 -

2 102-9149-2 3 102-30222-1 1398-2001-83 4 102-3701-1 5 102-3701-6 6 102-3701-10 7 102-3701-11 8 102-3701-12 9 298-17012-86 10 102-9236-1

'

35 36 37 38 39 40 '41 42

.

43 44 45 46 47 48 49 50 51 152 53

.

54 55 56 57 58 59

Part Number

No. Req'd.

Description

3983000-68 502-6230-80 298-8018-86 102-7033-3 298-9018-86 102-7949-1

Cotter Pin 3/16 x 2" Hydraulic Tank (Reference Only) Hose Adaptor 1/2 " M.P.T. Hose % " x 33" long Hose Clamp Steering Pump (Vickers VTM-42-60-75-15-MD-R1-14) See Separate Illustration Elbow — 90° 3/4 " 0 Ring x 34 - 16 298-8111-86 J.I.C. Str. Adaptor 1/2 " MNPT x 3/4 16 298-2172-62 Str. thd.

398-14000-52 Coupling 1/2 " NPT 102-30524-1 Wire Set — Horn (84" long) Wire Set — Horn (40" long) 102-30524-2 398-20001-2 Cut Washer % " S.A.E. Cotter Pin 1/16 X 3/4 398-3000-6 Roll Pin 298-6035-34 298-315-2 Flangette Bearing Mount (Half) (Fafnir 62MST) 298-314-2 Bearing (Fafnir 1103KLLB3) 502-8332-80 Handle 502-20007-80 Shaft — Control 102-9754-1 Cross Shaft 298-6029-34 Roll Pin 316 x 1 1/4 " 298-4516-68 Plastic Tie Clamp 298-9045-86 Tubing Clamp — 7/8 O.D. Tube 502-8337-80. Brake Release Roll Pin 1/8 x 3/4" 298-6021-34 298-322-47 Ratchet 398-2005-50 Cap Screw % x 21/2" H.T. U.N.C. 398-11000-19 Hex Nut %" U.N.C. 398-20000-37 Lock Washer 3/3 Spring 202338 Spring 102-699-1 Holder — Spring 102-9739-1 Lock Nut %" U.N.C. 298-2012-71 502-4965-80 Gate —Left Hand 502-4966-80 Gate— Right Hand

2 1 1 1

1 1

-

T

"

"

{

(C) FISCHE NO. 7 GRID A-21

"

1 1 1 1 2 2 2 8 4 2 1 1 2 15

1 1 1 1 2 2 2 1 2 2 2 1 1

Always GiveSerialNumberof Machine

OPERATORS CONTROLS AT CONSOLE — STEERING, THROTTLE AND BRAKE — STEERING AND HOSES — MULTIPLE DYNAMIC FORCE VIBRATION MODEL 950 SELF PROPELLED VIBRATORY ROLLER

re, VIP m X

OPERATORS CONTROLS AT CONSOLE — (Continued)

a cD

z

0 O

Item No. 60 61 62 63

bg: 11)

CL (1)

b"' z

64 65 66 67 68 69 70 71 72 73 74

Part Number

Description

Block 102-30434-1 Cap Screw 3/8 x 21/2" U.N.C. 398-2001-89 {398-11000-19 Hex Nut %" U.N.C. Arm — Limit Switch 102-9911-1 Rod — Limit Switch 1 ft. — 102-9913-1 3 3/4" lg.

Rod — Limit Switch 1 ft. 14" lg.

102-9913-2 Ball Joint 1/4 - 28 X202821 502-20008-80 Shaft — Brake Bracket — Control 502-4979-80 Spacer 102-9813-1 Cap Screw 3/8 x 2 1/4" U.N.C. 398-2001-88 Handle 502-8347-80 Bushing 298-7007-8 Cap Screw 1/2 x 2" U.N.C. 398-2002-31 398-11000-52 Jam Nut I/2" U.N.C. 398-20000-25 Cut Washer 1/2"

No. Req'd.

2 2 2 2 1 1 4 1 1 2 2 1 1 1 1 2

,

Part Number

No. ltem 75

Description

No. Req'd.

102-7245-12

Control Cable — Override to Moog Valve on Vibration Hydraulic Pump' 1 76 298-135-47 Ball Joint 2 77 102-7253-1 Cable Brake 3 78 102-9811-1 Lever Extension 1 79 j02-9812-1 Cable Bracket 1 298-146-47 Clamp 1 _398-10000-36 Rd. Hd. Machine Screw #8-32 x 5/8" 2 80 398-10001-17 Hex Nut #8-32 2 398-20000-78 Lock Washer #8 2 81 102-10037-1 Vibratory Hydrostatic Pump (See Power Unit Illustration and Parts List Item 44 for Service Parts Information) 82 Lever on Moog Mfg. Co. Control (Reference Only) — 83 Cut Washer — 31 6 " (As Needed) — Bracket—Brake 1 84 102-9736-1

z 0

a. z

0

(C) FISCHE NO. 7 GRID A-22

co

Rejinord

Rexnord Inc

Milwaukee, WI 53201

Always Give Serial Number of Machine 1111111111

477-23

(N ew 10/77)

HYDRAULIC PUMP — STEERING VICKERS PART NUMBER VTM42-60-75-15-MD-R1-12 REX PART NUMBER 102-7949-1 Item No.

Part Number

Description

No. Req'd.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

102-7949-10 102-7949-11 102-7949-12 104-7949-13 102-7949-14 102-7949-15 102-7949-16 102-7949-17 102-7949-18 102-7949-19 102-7949-20 102-7949-21 102-7949-22 102-7949-23 102-7949-24 102-7949-25 102-7949-26 102-7949-27 102-7949-28 102-7949-29 .

102-7949-30 102-7949-31 102-7949-32 102-7949-33

Manifold Sub-Assembly (*281409) Cover Sub-Assembly (*286613) Control Valve Sub-Assembly (*232797) Ring (*296599) Body Sub-Assembly (*296601) Shaft (*250455) Washer (*28931) Screw (*199144) Pin (*32559) Screw (*171523) Spring (*170072) Plug (*175049) Spring (*245507) Pressure Plate (*276396) Pin (*154364) Vane Kit (*922594) (10 pcs.)

Rotor (*213859) Cartridge Kit (*923092) Bearing (*222440) Snap Ring (*106641) Bearing (*148423) Key (*1606) Snap Ring (*172376) Seal Kit (*922904)

1 1 1 1 1 1 1 3 1 4 1 1 1 1 2 1 1 1 1 1 1 1 1 1

*Vickers Incorporated — P.O. Box 302-Troy, Michigan 48084 part numbers.

Specify

(C) FISCHE NO. 7 GRID A-23

Quantity, Part Number and Description When Ordering

111

con st ructi onma ch i nery

I 1— CsiCOcr1.11 CD 1`..CO Cr)01— Cs1CO 'Cr it)CO 1%.03 Cr) 0 1—

Always GiveSerial Numberof Machine

Item No.

Part Number 102-09236-01 102.09106-10 102-09106.11 102-09106.12 102-09106.13 102.08077-21 102-08077-22 102-08077.23 102-09106-14 102-09106.15 102-09106.16 102-09106-17

N CO 'Cr N CNICSICNIN

102.09106-18 102.09106-19 102-09106.20 102.09106-21 102-09236.10 102-09236-11 102.09106-24 102-09106-25 102-09236.12 102-09236-13 ..

Description

No. Req'd.

Steering Valve (Char-Lynn *YP12SHF) Terminal & Wire (21142.1) Insulator Contact (*21138) Spring Contact (*5029) Washer Contact (*5028) Ring, Snap (*14092) Ring, Retainer (*5245) Bearing Assy. (*21146) Not Used Shaft Assy. (*6783) Ring, Contact (*21149) Insulator (*21151) Tube & Flange (*6785) Cap Screw % - 16 x %" Horn Brush Kit (*6414) Connector (*21173) Drive (*5126) Plate (*5414) Gear Set (*5664.8) Spacer (*5178) Spline (*5213) Cap, End (*6481) Cap Screw 12 pt. x 3" (*5389.14) Cap Screw 5/16 "-18x%"(*21046-1) Oil, Seal

1 1 1 1 1 2 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 7 4 1

Item No. 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Part Number 102.09106-26

**

102.09106-27 102-09106.28 102.09106-29 102-09106.30 ** 102-09106-31 *** ..... ** 102.09106-32 102.09106-33 102-09106-34 102.09106-35 102-09106.36 102.08077-16

Description Plate, Valve Housing (*843) Seal Bearing Kit (*64006) (Incls. 28, 29, 30) Race, Bearing (*5542) Locator, Bearing (*5543) Bearing, Thrust Needle (*5544) "0" Ring Control Kit (*6419) (Incls. 33-41) Housing Sleeve Spool "0" Ring Plug Seal (*21124) Seat, Check (*859) Ball, Steel (*18026) Spring, Compression (*857) Pin, Centering (*15) Seal Kit (*5140) (Incls. 24, 26, 31, 36)

*Char-Lynn Co. part numbers **Parts Included in Seal Kit, item 42. ***Parts Included in Control Kit, item 32 — Not Sold Separately.

(C) FISCHE NO. 7 GRID A-25

No. Req'd.

1 1

1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1

con st ructi onm ach i nery

ORBITROL STEERING VALVE — CHAR-LYNN

Rex

IN

construction machinery

( C) F ISCH E N O. 7 GRID B- 1

477-26

(New 10/77)

Always Give Serial Number of Machine

SpecifyQuantity, Part N umberandDescriptionWhen Ordering

Part Number

Item No. 1 2

X203699 102-4375-1 102-4375-11 102-4375-12 102-4375-13 102-4375-14 102-4375-15

3 4

102-4375-16 102-4375-17 298-9032-86 298-6176-17

5

298-6067-17

6 7

298-274-47 102-9149-1

8 9 10

102-9149-2 102-9149-3 102 9149 4 - _102-9149-5 -

-

-

Description . .

Channel, Rubber Instrument Cluster Assembly Consisting of: Ammeter (Stuart Warner #440436) Water Temperature Gauge (Stewart Warner #442784) Oil Pressure Gauge (Stewart Warner #444642) Fuel Gauge (Stewart Warner #441343) Tachrometer (Stewart Warner #551-LR) Glass (Stewart Warner #411329) Bezel (Stewart Warner #413222) Cable Clamp Switch — Lock (Cole Hersee #EX17351) Switch, Start, Push Button (Cole Hersee #9216) Key (Cole Hersee #83357) Horn Package Kit (Includes item 8 thru 10 inclusive) Horn (Delco #9000513) Nut Bracket Bracket

No. Req'd.

Item No.

2

11 12 13

1 1 1

14 15 16

1 1

17

1 1 1 2 1 1 1 1 1 1 1 1

1 •

18 19 20 21 22 23 24 25 26 27 28

Part Number

' Description

No. Req'd.

298-15018-17 Relay — Horn 1 298-6019-17 Switch — Lights _ 1 Cable — Emergency Stop 48" lg.

102-7957-2 (Morse #B48701) (on Hydraulic Tank) 1 102-8022-1 Mounting Bracket (on Hyd. Tank Shell) 1 , Cable Clamp (Morse #A31804) 298-146-47 1 Cable Clamp 298-30-47 1 298-6123-17 Switch, Water Spray 3 Seal, Switch 298-52-17 3 Fuse and Holder, 10 Amp. 602-10238-1 2 298-5525-68 Grommet — for Wires 2 102-30188-3 Flexible Shaft — Tachrometer 1 Cable — Pull to Stop — 168" 102-7957-6 1 Cable — Throttle, 156" lg.

102-8642-1 1 298-5711-68 Shear Sandwich Mount 2 Isolation Washer 102-9509-1 2 Cap Screw 1/2 x 3/4" with L.W. 4 398-2001-76 Cap Screw 343 x 1" 2 Lock Nut 3/8" 2 Mounting Angle 102-9746-1 1 502-6501-80 Instrument Panel 1 102-9912-1 Control Valve — Manual Multiple Dynamic Force — (Webster Electric Co. Part No. 187E2F) Altered 1

(C) FISCHE NO. 7 GRID B-2

Always GiveSerial Numberof Machine

OPERATORS CONSOLE & INSTRUMENTS, SWITCHES, EMERGENCY STOP MODEL 950 VIBRATORY ROLLER

42

52

52

4

3— oiLms-TRumE

52 51 I 2 2

Pass.

20

33

V IB. N■AR‘

FUE L LEVEL

ENGIN TEMP

0 iG NOS

METER

OIL II TIRE SWITCH I SWITCH

FREQ. \ METER

ROLL

SWITCH

1G

SPEEDO \ METER

CLUSTER L ANTS

53 49

Always Give Serial Numberof Machine

44

co

HO RN

34 44 50

N In O

o 0 09

16

04 :1 ° ENG. TE MP.

—44 43

26 BUTTON .Q..

31 35 36

54

OIL

S 0 I Co

43

12 CABLE ASSEMBLIES ARE PART OF ZO

LIMIT SW ITCH MOUNTED ON TRACTION PUMP

20

Oq PRESSURE SWITCH

[433

44—, 29 morel

STARTER

39

BATTERY

74

GRD.To

S P E EDOMET ER PICK UP

ENGINE

40 21

GROUND ENGINETO FRAME

(C) FISCHE NO. 7 GRID B-3

VIBRATION TRANSDUCER

SWITCH SHOWN IN TRAVEL POSITioN(CONTACTS 3 @ 4 OPEN.) WHEN MACHINE IS IN NEUTRAL LIMIT SWITCH ACTIVATE- 54 CONTACTS 3 4 CLOSE / 4 2 OPEN.

11111110.

111111111.•

const ructi onmach i nery

4

19

LIMIT SW ITCH MOUNTED Om TRAC-r ION PUMP

32

-o

13

38

OPT ION AL

25 29 SW ITCH

37

REA R

—43

12 11

28

To ENOINE

SOLENOID

Ca==l1

27 GROVND

HORN

IN

0

24 LiGeiT, BUTTON

C 3

z

2 5 LK)

FRONT

26

9

0 FREQ. SET POINT

GI Item No.

AlwaysGiveSerial Numberof Machine

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

---

Part Number

102-4375-1 298-6176-17 298-5004-17 298-5005-17 602-1495 ...... . .

298-52-17 298-6067-17 298-6123-17 298-15018-17 298-26085-17 298-26086-17 298-6540-17 298-2066-56 298-2083-56 298-2067-56 602-3124 X8189 1298-3255-17 298-3256-17 102-10020-1 298-26040-17 298-103-17

r

298-12015-17 298-6543-17 102-9148-1 298-26087-17

Description Instrument Cluster Key Switch 2 Amp. Circuit Breaker 20 Amp. Circuit Breaker Pressure Switch Not Used Seal For Toggle Switch Start Button Toggle Switch Horn Relay Bullet Terminal Connector — 2 Wire Bullet Pressure Switch — Fuel .

Oil Press Sending Unit Fuel Sending Unit Temp. Sending Unit Vibration Transducer Wire Terminal for 3/8 Stud Battery — Standard Battery — Cold Start Control Panel Battery Cable 1 ft. 7" lg.

Frequency Pick-up Not Used Flood Lamps Solenoid Switch (IGN) Horn Button Kit _ Connector — 3 Wire Bullet

No. Reci'd.

Item No.

1 1 1 2 1 — 4 1 4 1 1 2 1 1 1 1 1 1 1 1 1 1 2 — 4 1 2 3

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Part Number 298-46-98 298-6524-17 102-6440-1 102-9149-2 102-10037-1 298-13162-17 298-86-17 102-9149-3 102-9149-4 102-30523-1 298-26034-17 102-9790-1 102-9791-1 203027-1 102-30527-1 102-30503-1 102-30507-1 102-8523-3 102-8523-1 102-10184-1 102-30673-2 102-30526-1 102-30526-3 102-30673-1 102-9859-1 502-2829-80

Description Solenoid Switch (Oil Wet) Limit Switch Pump (JABSCO 8860) Horn Pump Control Light Kit (Instrument Cluster) Connector — Solderless Nut — Bracket — Horn Bracket — Horn Wire Set Wire Terminal for 1/4 Stud Wire — 12" lg.

Wire 15" lg.

Wire 6" lg.

Wire 1 '0" Wire Set Wire Set Not Used Battery Cable 8 ft. lg.

Battery Cable 6 '1" Not Used Wire 7" lg.

Wire 5 ft. lg.

Wire 1 ft. lg.

Wire 3" lg.

Wire 14 Ga. 2 ft. 6" lg.

Wire Set 1 '6" lg.

Wire 1 '8" lg.

No. Req.d.

1 1 2 1 1 2 7 1 1 1 2 1 1 1 2 1 1 — 1 1 — 1 1 5 5 1 1 1

const ructi onma ch i n ery

WIRING DIAGRAM — MULTIPLE DYNAMIC FORCE MODEL 950 SELF PROPELLED VIBRATORY ROLLER ONLY

m O

(C) FISCHE NO. 7 GRID B-4

O

477-30

Rex

10/77)

IN

construction machinery

4

A.SSV dWV dON3Id 143.LIMS N0110991A 113131110033dS 3110SS311d

dfl93Id 31131400W

000W

of YZ

oom

511

® ®

oz

111T111 0 0

Oi

mr ova.r C•1 V.1 N e4

■11

0

OD 010, Op r`t0 f7

FISCHE NO. 7G RIDB-5

B

° of

r-.

I; 010 CI) (I) ® O.

dfiNald DOW 1Z 0110 pis r DIS ray WdA iloz 11313W 313W 113114 -I_ DIS ELM INdA 81 MS SS39d — 11410d 13S %HA ILZ1 '5'1 'OMA 01 V1 .A31:1 6 AZI 4 r DON 6L ,, L 000W

'9'3'd 40W A0139 9 , 11311011 A110101191A — 11110d'0119 13S b3114 SE 331103 IN 331104 MOl I

• \\

113MOd

C-5

Ol

331104 HDIN 11313W A3N300393

11313W 3011111dINV NO1101191A

331104 MOl

N0 8 JJO 113MOd

O 11313W0033dS

Always Give Serial Number of Machine

CI R CLE D NU M BE R SA R E

(New

WIRING DIAGRAM MDF CONTROL

Item No. AlwaysGive Serial Numberof Machine

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Part Number

No. Req'd.

D iti escrpon

1 1

102-10008-1 102-1088-1

Enclosure 12 x 10 x 6 Serial No. Plate

602-8413 602-8484 602-8485 298-16289-17 298-124-17 298-6139-17 298-12033-17 298-12077-17 298-12034-17 298-12035-17 298-320-47

Vibration Meter Ass'y.

Frequency Meter Ass'y.

Speedometer Ass'y.

Rheostat 1K, 50W Knob Toggle Sw. SPST Light Socket Light Bulb 14V Lens, Red Lens, Green Hex Spaer %" Self Tapping Mach. Scr. #6-32 x 3/8 Edge Connector 22 Term.

MDF Control PCB Limit Switch Limit Switch Terminal Block 300V Terminal End Face Plate

Item No. 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 70 71 72 73 74 75

1 1 1 1 1 1 2 2 1 1 4 8 1 1 1 1 25 2 1

No. Req'd.

Description

_

-

298-13178-17 602-8473 298-6524-17 298-6541-17 298-26070-17 298-26071-17 102-5370-1

Part Number

.

298-13088-17 298-13081-17 298-11-17 298-13089-17 298-13098-17 102-30535-1 602-1495

Receptacle 2PI F Receptacle 6PI F Grip Plug 2PIM Plug 6PIM Support Angle Pressure SW. Ass'y.

102-30095-19 102-10007-1 298-19-17 298-13176-17 298-13177-17 298-13150-17 298-13151-17 398-14007-00 398-99005-78

Legend Plate Legend Plate Grip Plug 4PI F AMPH #MS3106A-14S-2S Cable Clamp AMPH # AN-3057-6 Plug 2PI F Cable Clamp Cord SO. # 18-2 Cord SO # 18-6 PI SO # 18-2 Vib. Amp. Ass'y. SO # 18-6 Mag. Pickup SPD SO # 18-2

4 1 1 3 1 2 1 1 1 1 1 1 2 2 49 ft.

15 ft.

6 ft.

15 ft.

17 ft.

Pump Control (Moog) SO # 18-2 Magnetic Pickup SO # 18-2

10 ft.

16 ft.

,

AJOUI LI 3D W UOI M AI SUO D

•

----lb

z

CD -

0 (33

(C) FISCHE NO. 7 GRID B-6

12-YELLOW

P.C. BOARD SCHEMATIC

(

BLACK

-

(+)

2V DC

)

10

W IRE

CD

-BLACK WIRE

0 S.? "

MPP WHITE C4

e_chis„.„443.4) AIRPAZ 1-0001 CI

•---) •

.22 mFd @75VD

R4 I

ED

3

Iiew 5%

DI 1145059

RE

RI '.5W 57.

•

WI

D4

aurrpeN lo iaqumN repos eAto siiemni

5W 5%

21422.70 /

C2 4X L9 IS

DE

1145069

R3

103

8

3,

.15 rnFdal5V

11

r,rd •___e WH ITE 600 MICROAMP

BLACK

10

fz

RED

9 SPEEDOMETER ASSEMBLY & SCHEMATIC MODEL 950 SELF PROPELLED VIBRATORY ROLLER

WIRING DIAGRAM CORD ASSEMBLY SOS-205-80 SPLICE 7 INS W II

NEGATIVE GROUND SYSTEM

FUSE HOLDER 602-34-I

POSITIVE GROuNO SYSTEM

WIO

PICKUP 298-103-17 MAGNETIC

BLOW

SPLICE POINTS

1 2

102-3975-1 602-3344

3 298-7030-17 w

A

MAGNETIC

598-/03-/7

I AMP FUSE is S LOW • 5W. BLOW

FUSE HOLDER 602-34- I

Part Number

Item No.

PICKUP

4 102-9918-1 5 298-5697-68 6 298-139-17 7 8 9 10 11 12 13 (C) FISCHE NO. 7 GRID B-7

Description Panel Meter Assembly Tachrometer P.C. Board Assembly Capacitor .15 Mfd. — 75WVDC Speedometer Face Grommet Tested Label Fiber Insulating Board Meter Movement Red Wire Black Wire White Wire Yellow Wire Instrument Panel Assy.

No. Req'd.

1 1 1 1 1 1 1 I

co n st ructi o nm a ch i ne ry

CORD ASSEMBLY 502-E os-- 8o

1

A

Rex

III

477-33 (New 10/77)

construction machinery

7 8 9

.11Ik 12 11

STEERING CYLINDER (GREEN)

Item No.

Part Number

Description

102-30292.01 1 2 3 4 5 6 7 8 9 10 11 12 —

102.30292-11 *102.30292-12 102-30292.13 102.30292-14 102.30292-15 *102.30292-16 *102.30292-17 102.30292-18 102.30292-19 102-30292-20 *102-30292-21 *102.04714-19 102-30292.22

Steering Cylinder (Green #73.386) Incls. the following Service Parts Lock Nut • Poly-Pac Piston Barrel Assy.

Rod "0" Ring "0" Ring Lock Wire Cap Cap Screw Dust Seal "0" Ring Seal Service Kit IncIs. *Items 2, 6, 7, 11 & 12

(C) FISCHE NO. 7 GRID B-8

Always Give Serial Number of Machine

No. Req'd.

1 1 2 1 1 1 1 1 1 2 2 1 1 1

Rexnord Inc

477-34 (N ew 10/77)

111111111

■

Milwaukee, WI 53201

Always Give Serial Number of Machine

53

41 40 39 1:38 8

67 65

HYDRAULIC TANK

54

26

23

=pp

66

eV moo

22

11

13---J

28

59 52

45

46

50 12

44

64

4

*

;.

•!•1 ■< 0 '1WO

41

0,0

21 55 31 56 24 57 58

.shilansissa

29 7D P °

A

4 1:1?

VIBRATOR

48

N 49

11

. cis

42

P low

17

51

43

Ve0

30 61

B

10

:De

FROM PR 01.111N PUM

45 44

25 4.1•4111=1•11•P

47

14

■e

15 18

101 VIEW C-C

P

20

16

13 12

ii

60 63 62

20 15

27

11

20 24

Rex

32 33 34 35 36 37

lidr* OAP am

48

PUMP

F ISCHE NO. 7G R IDB-9

■

111

Specify Quantity, Part Number and Description When Ordering

Item No.

SpecifyQuantity, Part Numberand Description When Ordering

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Description

298-2078-62 298-17002-86 298-14503-86 298-8080-86

Coupling 1" N.P.T. Tee — Pipe 3/4 " N.P.T. Reducer Bushing 3/4 x 1/4" N.P.T. Adapter — Straight 7/8" 0 Ring x 3/4 " N.P.T. Elbow — 90 ° , 1 5/16" 0 Ring x J.I.C. Elbow — 90°, 7/8 0 Ring x J.I.C. Elbow 90°, 7/8" 0 Ring x 1/2 ' N.P.T. Elbow 90 ° , 3'1 6" 0 Ring x 1/4" N.P.T. Nipple 1/4 N.P.T. Street Elbow 1/4 NPTF x 45° Service Tee 1/2" NPTF Hose. Assy. 541/2 " lg.

Hose Assy. 53 1/4" lg.

Hose Assy. 72" lg.

Tee 1/2" NPTF Oil Cooler (Reference Only) Elbow 90° x 1/2" NPT Hose Assembly — 36" long Reducer Bushing 1/2" x 3/8 N.P.T. Close Nipple 1/2 N.P.T. Manifold Relief Valve (2000 P.S.I.) (SP848 only) Manifold Relief Valve (3000 P.S.I.) (SP900 only) Reducer Bushing 1" x 3/4 " N.P.T. Close Nipple 3/4 ' N.P.T. Street Elbow 1/2 " N.P.T. x 90° Elbow 1/2" N.P.T. x 90° Elbow — 90°, 1/4 " Tube x 1/4" N.P.T. Check Valve Connector — 1/4 " Tube x 1/4 " N.P.T. Hydraulic Pump (See Separate Illustration)

298-8076-86 298-8030-86 298-2093-62 298-2245-62 298-12003-86 298-2081-62 298-2246-62 102-3695-1 102-3702-1 502-1350-94 298-17010-86 298-5054-92 298-2075-62 502-1347-85 X7484 298-12001-86 102-4365-79

21 102-4365-15 22 23 24 25 26 27 28 29

No. Recrd.

Part Number

298-14500-86 298-12002-86 X7487 298-2247-62 298-19-1 298-2170-62 298-15,1 102-8704-1

1 2 1 1 2 1 1 2 1 1 2 1 1 1 2 1 1 1 1 4 1 1 1 1 2 1 1 1 1 1

Item No.

Part Number *102-8580-1

30 *102-9742-1

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57

298-2248-62 X7604 102-8094-1 298-9035-86

102-1594-4 298-8033-86 102-3998-1 102-30467-1 102-3946-1 102-3946-2 102-3849-3 502-2785-80 502-1347-84 502-8004-80

502 8367 80 -

-

502-8005-80 102-3688-1 298-2086-56 398-99000-17 102-4365-33 102-4365-40 102-4365-41

(C) FISCHE NO. 7 GRID B-10

Description Hydraulic Motor, Vibrator (Commercial Shearing & Stamping M25X778BEVL15-7) (See Separate Illustration) Hydraulic Motor, Vibrator (Commercial Shearing & Stamping 51 Series Part No. D231-20) — See Separate Illustration.

Adapter — 7/8" 0 Ring, x 1/2" N.P.T Cold Shut 3//16 Bar, Connecting Hose Clamp Cap Screw 1/2 x 1" Lock Washer 1/2 " Hex Nut 1/2 " "0" Ring (SAE 1") Split Flange Clamp 1" H.C. — H.T. Cap Screw 3/8 x 1 1/4 " Lock Washer 3/8 Hose Assembly -- 33" long Hose Assembly — 21 3/4 " long Hose Assembly — 56" long Hose Assembly — 62" long Hose Assembly — 30" long Hose Assembly — 88" lg.

Hose Assembly — 33" lg.

Hose Assembly — 62" lg.

"

Hose Assembly

—

6 ft. long

Hose Assembly — 20" lg.

Hose Assembly — 76" 1g.

Vacuum Gauge Coupling — 1/4 " N.P.T. Galvanized "0" Ring "0" Ring Back-Up Ring

No. Req'd.

1

1 1 3 1 4 1 1 1 10 20 40 40 1 1 1 1 1 1 1 1

Always GiveSerial Numberof Machine

VIBRATOR HYDRAULIC SYSTEM MODEL SP848, 900 OR 950 VIBRATORY ROLLERS

1

1 1 1 1 1 2 2

z CD

o 5.2

SpecifyQ uantity, Part Numberand Description WhenOrdering

VIBRATOR HYDRAULIC SYSTEM — (Continued) MODEL SP848, 900 OR 950 VIBRATORY ROLLERS

Item No.

Part Number

Description

H.C.-H.T. Cap Screw 5A 6 x 3 3/4" Swivel Adapter 90' x 3/4" N.P.T. Adapter 34 Female x 1/2" Male NPTF. Not Used 61 398-14007-56 Nipple 1/2 x 4" Galvanized — TBE. 62 398-14000-53 Coupling — 1/2" Galvanized 63 Manifold Block 64 102-5254-1 Hydraulic Tank (Reference Only) 502-6035-80 65 Copper Tube 1/4 " O.D. x .032" wall 66 x 4 ft. long Bracket, Vacuum Gauge 67 502-8007-80

58 398-2006-79 59 298-2068-62 60 298-2244-62

No. Req'd.

6

1 1 1 1 1 1 1

*Vendor, Commercial Shearing & Stamping Co. has instituted a design change - to replace entire motor on model SP848 furnish 102-9833-1 rebuilt, fully warranted motor or 102-8580-1 motor.

— to replace motor on model SP900 furnish 102-9742-1 motor with 2 of 298-8148-86 adapter, 2 of 102-1594-4 "0" Ring, 4 of 298-8033-86 split flange clamp, 8 of 398-2005-56 cap screw 3/8 x 1 1/4" and 8 of 398-2p0037 lock washer, note this can be used on SP848 when 102-9833-1 or 102-8580-1 are not available. (Note this change on your copy of machine record.)

(C) FISCHE NO. 7 GRID B-11

111

ARTICULATING CROSS 11111•1111111111111•111111111111111

477.37 (New 10/77)

1 10

Item No.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Part Number

No. Req'd.

Description

402-02616-04 298-10027-02 298-10028-02 102-08757-03 102-08757-02 102-08757-01 102-03977-01 102-03978-01 398-02002-28 398-08000-07 102-08757-04 502-04676-80 502-07107-80 502-07114-80 398-02004-80 298-02035-71 298-03527-68

Articulating Cross Inner Bearing Ring Outer Bearing Ring Shim (.050") Shim (.010") Shim (.005") Sleeve - Bearing Bearing Retainer Cap Screw 1/2 - 13 x 2" H.C.-H.T. Lube Fitting, 14," NPT #1610 Shim (.125")Bracket - Bearing Housing Roll Frame Main Frame Cap Screw 3/4 x 5 H.C.-H.T. Stop Nut 3/4" "0" Ring

1 4 4

4 8 12 4 4 24 4 2 1 1 1 8 8 1 M ar. '73

(C) FISCHE NO. 7 GRID B-12

Always Give Serial Number of Machine

Rex

477-38 (New 10/77)

Rex

IN

construction machinery

PUMP

27 25

22

23

15

13 12 HYDRAULIC TANK

7 SUCTION LINE

STEERING PUMP

MANIFO LD

IN FRAME

19 ROTATING UN ION

(C) FISCHE NO. 7 GRID B-13

Always Give Serial Number of Machine

477-39 (New 10/77)

Rex 1'I constructionmachinery

HYDRAULIC SCHEMATIC — MULTI DYNAMIC FORCE MODEL 950 VIBRATORY ROLLER

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Part Number X7896 298-2246-62 398-14005-72 602-1495 298-17001-86 398-02001-58 298-14508-86 X7489 298-2172-62 398-20000-64 102-3701-5 502-1341-86 502-1347-86 298-14502-86 102-3701-10 298-8049-86 298-2142-62 102-2847-3 298-7515-86 298-6501-86 298-8146-86 298-8156-86 102-9815-1 102-9912-1

Description 1/2 x 1/4 Red. Bushing /2 Street Tee 3/8 Sq. Hd. Pipe Plug (Galv.)

Pressure Switch with Plug 1" Pipe Tee 5/16 x 3A. Cap Screw 1 x 1/2 Red. Bushing 1/2 Pipe Tee Str. Adapt. 1/2 NPT x 3A - 16 JIC A6 L.W. 1/2 I.D. Hose 134" lg.

1/4 I.D. Hose 42" lg.

5/8 I.D. Hose 42" lg.

Not Used 3/4 x 1/2 Red. Bushing 1/2 I.D. Hose 180 lg.

Male Elbow 3/8 NPT x 94 6 - 18 JIC Not Used Str. Adapt. 3/8 NPT x 9A 6 - 18 JIC Not Used 3/8" I.D. Hose 89 lg.

Str. Adapt. 1 1A 6 - 12 JIC x 3/4" Pipe Female Elbow 3/4 NPT Male & Female Male Elbow 3/4 NPT x 3A - 16 JIC Str. Fitting "0" Ring Boss Not Used Pressure Compensating Pump Control Valve 1

(C). FISCHE NO. 7 GRID B-14

Always -Give Serial Number of Machine

No. Req'd.

1 1 1 1 1 4 1 1 1 4 1 1 1 — 1 1 2 — 2 — 2 1 1 2 1 — 1 1

Rem

R lxwnao ur dk eInc. e \AI I

,Kim A4

477-40 (New 10/77)

811111111

5320 1

Always Give Serial Number of Machine

42 23 41 30 29 42

42

42

n

22

6 42

(C) FISCHE NO. 7 GRID B-15

Specify Quantity, Part Number and Description When Ordering

Always Give Serial Number of Machine

Remord Rexnord 111111111 II

Inc Milwaukee, WI 53201

477.41 (New 10/77)

VARIABLE VOLUME HYDRAULIC PUMP MODEL 950 MULTIPLE DYNAMIC FORCE ROLLERS CONSTRUCTION MACHY. DIVN. PART NO. 102-9815-1 HYDRAULIC COMPONENTS DIVN. PART NO. PVQ-PSEJ-06ERM

Item No.

Part Number

1 2 3 4 5 ‘6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

102-9815-10 102-9815-11 102-9815-12 102-9815-13 102-9815-14 102-9815-15 102-9815-16 102-9815-17 102-9815-18 102-6913-26 102-9815-20 102-6913-31 102-9815-22 102-9815-23 102-9815-24 "102-9815-25 102-9815-26 102-9815-27 102-9815-28 102-9815-29 102-9815-30 102-9815-31 102-9815-32 102-9815-33 102-9815-34 102-9815-35 102-9815-36 102-9815-37 102-9815-38 102-9815-39 102-9815-40 "102-9815-41 102-9815-42 "102-9815-43 102-9815-44 102-9815-45 102-9815-46

1

102-9815-48 102-9815-49 102-9815-50 102-9815-51 "102-9815-52 102-9815-53 102-9815-54 102-9815-55 102-9815-56

Description Body — R.H. (*222611) Cover — R.H. — Journal Bearing — SAE Porting (*222612) Plate — Body (*290177) Ring — (*304647) Plate -- Port Cover — R.H. (*308500) Shaft — Rotor (Journal) (*308431) Roll Pin (*402386) Name Plate (Not Illustrated) (*400599) Screw, 5A6 - 18 x 1 1/4" (*400789) Pipe Plug 1A 6 " NPTF (*400925) Key (*401122) Screw — Self Tapping (*401296) Vane (1 set of 12) (*406153) Nut (*406426) Set Screw (*406427) Shaft Seal (*490954) Roll Pin (*402265) Shim (.0010) — as req'd. (*490959) Shim (.0015) — as req'd. (*490960) Shim (.0020) — as req'd. (*490961) Shim (.0030) — as req'd. (*490962) Nameplate (*490997) Plug — Port End Cover (*491010) Bearing — Journal (*778088) Body — Governor (*222511) Adjustment Screw (*304834) Screw 1/4 - 20 x 3/4" (*400780) Roll Pin (*407464) Spring 1000 psi (*406457) Spring Seat — Adjustable (*308402) Spring Seat (*308403) "0" Ring Assy. (*778089) Thrust Washer (*490998) "0" Ring '1/32 x 1 1/2 x 1 11A 6 (*490250) Dowel Pin (*490957) Cap (*221299) Screw 8 - 32 x 5/8 (*400772) Not Used Shim .002 (*402316) — as required Shim .003 (*402317) — as required Shim .005 (*402318) — as required Seal Plate (*405230) "0" Ring (*405231) Thrust Block Assy. (*777184) "0" Ring (*408172) Buna Seal Kit (*723199) Repair Parts Kit (*723200) **Parts included in item 41 102-9815-55 Buna seal kit.

FISCHE NO. 7 GRID B-16

No. Req'd.

1 1 1 1 1 1 2 1 4 2 1 4 1 1 1 1 4

1 1 2 1 1 8 1 1 1 1 1 1 1 1 1 2

1 1 1

1

1

'(C) Specify

•

Quantity, Part Number and Description When Ordering

111

Always Give Serial Numberof Machine

const ructi onmach i nery

MULTIPLE DYNAMIC FORCE ROLL ASSEMBLY MODEL 950 VIBRATORY ROLLER ONLY 0 3

Item No.

Part Number

Always GiveSerial Numberof. Machine

1 502-5979-80 2 102-3647-1 3 298-28-93 4 502-4936-80 25 98-6035-68 5 298-6036-68 6 02-4814-80 7 102-9801-1 8 502-4383-80 398-2003-5 9 1298-2035-71 { 98-46-93 10 1-398-20000-41 11 402-2606-2 12 402-2607-2 13 402-2605-2 298-88-93 14 [298-36-97 15 298-312-2

1.

16 17 18

298-274-2 298-275-2 298-3089-68

19 20

298-3093-68 298-3094-68

21 102-4516-1 {102-7897-1 22 102-7897-2 102-7897-3 23 102-7900-1 24 398-2001-77 25 102-3646-1 26 402-1693-2 298-12-93 27 {398-20000-39 28 402-2604-2 29 298-19-93

No. Req'd.

Description Vibratory Roll (Shell only) Inspection Cover Nylok Cap Screw 3/8 x 1" Wheel tire — Radial 165-SR15 (Goodyear) tube Isolator housing — top half Shim tire housing — lower half Hex head cap screw 3/4 x 2-3/4" Locknut 3/4" Self locking cap screw 5/8 x 2-1/4" Lock Washer Roll hub (Drive side) Hub (Driven Side) Wheel hub Self locking cap screw 3/4 x 3-1/4" Hardned washer 3/4" Spherical Bearing (SKF No. EPVB452320-M 2/W22) Bearing Cup (Timken No. L435010) Bearing Cone (Timken No. L435049) Oil Seal 3-3/4" I.D. (National No. 415379, Federal — Mogal — Bower or C.R. No. 37390) Oil Seal (National No. 455595) Oil Seal (National No. 415489, or Johns — Manville No. 15382 LDS) Bearing Carrier Ring Shim (as required .005") Shim (as required .0075") Shim (as required .020") tab-Lock, Bolt Heat treated cap screw 3/8 x 1" Bearing spacer Retainer Self locking cap screw 1/2 x 1-1/2" Lock Washer 1/2" Flange flat head self locking machine screw 3/8x 1"

1 2 4 2 2 2 2 4 2 8 8 12 12 1 1 2 16 16 2 4 4 2 2 2 2 2 2 1 12 12 2 2 12 12 2

No. Item

Part Number

30 31 32 33 34 35 36 37

398-6001-15 398-20000-81 298-2045-71 398-20000-39 X7846 X7328 398-95004-31 298-315-47

38 39 40

398-14000-44 398-20000-23 102-7974-1

41

102-7975-1

42 43 44 45 46 47 48 49 50 51

102-7976-1 298-3095-68 298-7020-34 298-62-93 298-103-17 102-3248-1 298-5000-34 502-6330-80 502-6507-80 298-5016-8

52 53 54

102-9392-1 398-6001-86 298-8626-34

55 56 57

502-4852-80 398-14010-31 502-8202-80 298-33-97 298-35-97 398-11001-83 398-20000-82 398-13000-35

58 59 60 61

r

8

(C) FISCHE NO. 7 GRID B-18

Description Woodruff key #1210 Cut Washer 7/8" Lock nut 7/8-14 U.N.F. Lock Washer 1/2" Grease Hose Rubber Grommet Alemite fitting A1184 90° Angle Body (Lincoln 20029) 1/8" P.T. female x 1/8" male Steel Coupling 1/8" Cut Washer 3/8" Coupling half — Drive — Exciter (Motor End) — Splined Coupling half — Driven — (Roll End) tapered-with key way Coupling sleeve Seal-coupling Snap ring Self locking cap screw 1/2 x 1-1/4" Magnetic pick up Lubrication plate Aluminum Drive Rivet Shaft — Vib. Roller Weight — Vib. Roller Bronze Bushing — SAE 660-1-1/2" inside Dia. x 1-3/4" O.D. x 2-1/4" L (Bunting No. F1276) Gear key 1/4 x 1/4 x 7/8" Retaining Ring — External for 2-1/4" shaft (Waldrs Kohinoor Inc. 5100225) Bearing Flange Countersunk pipe plug 3/8" Pivot Pin Thrust Race Thrust Race Slotted Nut 1" U.N.C. Cut Washer 1" Cotter Pin 3/16 x 2-1/4"

No.

2 0

1 1 1 4 2 2 2 2 2 4

1 1 1 2 2 4 1 2 8 1 2 4 1 1 1 1 1 2 18 8 2 4 2

3a

MULTIPLE DYNAMIC FORCE ROLL ASSEMBLY MODEL 950 VIBRATORY ROLLER ONLY (Coned.)

Item No.

Part Number

No. Re 'd .

Description

102-4763-1

63

298-335-2

Always Give Serial Numberof Machine

64

102-30266-1 398-2001-85 65 1 298-2012-71 398-20000-37 102-9398-1 66 { 102-9398-2 102-9398-3 67 298-174-2

68 69 70 71 72 73 74

102-9396-1 398-2077-24 298-2057-71 102-9391-1 398-17001-31 502-224-80 398-17000-8

•

-

Description

No. IN

J

62

Part Number

Item No.

Hydraulic Cylinder (Green Mfg. Co. No. 500-1058) see separate illustration Self Aligning radial bushing 1" Bore, 1-5/8" 0.D., 7/8" innerrace length (Roller Brg. Co. B16-L) Cylinder — Trunnion Carrier HC-HT. Cap screw 318'x 1-3/4" Lock Nut 3/8" Lock Washer 3/8" Shim Shim Shim Bearing — Spherical 1.250 Bore — 2.0" 0.D. .937 Outer race width, 1.093 Ba ll Width Torrington 12SBB20 or Roller Brg. Co. B20-9L) Clevis link U.N.F. HT — Cap Screw 1" x 3-1/2" Thin Lock Washer 1" Hydraulic Cylinder Pin Socket head set screw 3/8 x 3/4" Clevis Eye Socket head cup point set screw 1/4 x 1/2"

3 2 12 12 17 6 4

2 1 1 1 2 8 1

75

102-9397-1

76 77 78 79

502-8203-80 398-2005-43 298-2035-71 398-14008-58 298-6557-86

80 81

102-30286-1 298-6558-86

82 83

298-9044-86 298-2142-62 102-9821-1

84

85

86

3

398- 2004-63398-11000-58 102-9742-1

(C) FISCHE NO. 7 GRID B-19

1 1 2 4 1 1 1 1 5 1 2

H.T. Hex hd. Cap screw 3/4 x 3" Jam . N ut , 1 "-8 Hydraulic motor — 51 series (Commercial Shearing No. D231-20). see separate illustration 1

const ructi onmach i nery

.

High speed rotating union (coolant) model 1105-75, Rotor No. 1106-9, 5/8-18 UNF, RH Rotor thd, 3/8" NPT tap for Hydr. fluid (Drublin company 1919 Stanley Street, Northbrook III.) tie strut cap screw 3/4 x 7" (H.T.) Locknut 3/4" Pipe Nipple 3/8 x 3" (Galv.)

Union Elbow 90° male 37° flare, 3/8" ' female N.P.T. x 9/16 — 18 U.N.F. Thd. (Acroquip #2025-6-6S) Hose Union Elbow 90° int. pipe X "0" Ring boss 3/8-18 fern. N.P.T. x 3/4-16 U.N.F. Male tube clamp 3/4" Adapter Eccentric Weight

477.45 (New 10/77)

Rex II/construction machinery

17

WEIGHT ACTUATING HYDRAULIC CYLINDER FOR MODEL 950 SELF PROPELLED VIBRATORY ROLLERS REX PART NO. 102.4763-1 GREEN MFG. NO. 500.1058

Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

102-4763-10 102.4763-11 102-4763-12 102-30292-20 102-4763.13 102.4763-14 102.4763-15 102-4763.16 102.4763-17 102.4763-18 102-4763-19 102-4763.20 102.4763-21 102.4763-22 102-4763-23 102-4763-24 102.4763-25 102.4763-26

Description Rod Assembly *C-4296 "0" Ring *803.0 Rod Wiper *729 Cap Screw #925 Washer #C-2841 Locking Wire #965 Sleeve #C-4297 "0" Ring #814-0 Roll Pin 3/18 X 11/4" Piston #C-4294 Barrel Assy. #C-4293 Piston Seal #902-UP Rod #R1178 "0" Ring #814.1 Sleeve #C-4295 Rod Seal #893-UR Rod End #C4289 "0" Ring #807-0 Seal Kit #1413-S includes item 2, 3, 8, 12, 14, 16 and 18 *Green Manufacturing Inc. Bowling Green, Ohio Part numbers

(C) FISCHE NO. 7 GRID B-20

Always Give Serial Number of Machine

No. Req'd.

1 1 2 4 5 2 1 1 1 1 1 1 1 1 1 1 1 1 1

477-46

Rex

(New 10/77)

construction machinery

10 9

HYDRAULIC MOTOR — VIBRATION DRIVE COMMERCIAL SHEARING INC. REX PART NUMBER 102-9742-1

Item No.

1

2 3 4 5

Part Number 102-9517-10 J02-9517-11 102-9742-10 102-9742-11 102-9742-12

6 7 8 9 •10 11 12

102-7884-10 102-9517-14 102-7883-11 102-9517-15 102-9742-13 102-7883-17 102-9742-14

13

102-9742-15

14

102-9517-19

15 16 17

102-7463-22 102-7463-23 102-9832-20

18

102-9742-16

Description Snap Ring (*X134-283) Ball Bearing (*X69-58) Lip Seal (*X73-50-8) Retainer for Lip Seal (*AC1669) Not Used Shaft End Cover (*Computer No. 313-5037-402) Check Assembly (*M1391K) Ring Seal (*NB1669-1) Roller Bearing (*S1032) Pocket Seal (*BA3026-1) Thrust Plate (*Y1058-1) Gasket Seal (*UB3006-244) Integral Shaft and Gear Set (*PD1135ML1-15) Gear Housing (*Computer No. 313-8215-901) Part End Cover (*Computer No. 313-3120-100) Washer (*144-3) Cap Screw (*X2-27) Dowel Pin (Not Illustrated) (*Computer No. 391-2082-032) Pipe Plug (Not Illustrated) (*X1-11) — 1/4' NPT Drain

*Commercial Shearing Co., Youngstown Ohio part numbers (C) FISCHE NO. 7 GRID B-21

Always Give Serial Number of Machine

No. Req'd.

1 1 1 1 1

2 2 4 12 2 2

1 1 1

4 4 4 1

477.47 (New 10/77)

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Part Number

No. Req'd.

Description

502-04747-80 298-00218-02 102-08522-01 398-11000-72 602 ,-03145-01 102-047481 402-01728-02 102-08520-01 298-00286-02 298-08521-34 298-06018-34 502-02931-80 398-02001-52 102-08728-01 398-03000-63 502-02930-80 102-08521-01 398-02001-46 102-08521-02

Bracket, Link Rod End % " Threaded Rod 54" Jam Nut 5/8 " Transducer Assy., incls. 6 thru 19 Mounting Frame Oscillating Frame Shaft Ball Bearing, Sealed Retaining Ring Roll Pin 34 6 " x 1'/2 " Core Stack, Stationary Cap Screw 14" x 2" Transformer, Coil Cotter Pin '4," x 1'/2 " Core Stack, Oscillating Shim .005" Cap Screw '4" x 1" Shim .050"

102-30267-01 102-09399-01

Stop Bracket Cap Screw 5/8 ", Special

1

2 1

2 1 1 1 1 2 2 1 1 3 1 1 1

8 4 2 1 1 1 1

(C) FISCHE NO. 7 GRID B 22 -

Always Give Serial Number of Machine

Rex

477-48

Rex

(New 10/77)

IN

construction machinery

14 15 16 17 18

HYDRAULIC PUMP — VIBRATOR SUNDSTRAND MODEL NO. HT22-2080 REX PART NO.102-10037- I USED ON MODEL 950 VIBRATORY ROLLERS Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13

14 15 16 17 18 19

Part Number 102-4365-6 102-4365-8 102-4365-11 102-4365-12 102-4365-1

102-4365-47 102-4365-52

102-4365-48 102-4365-49 102-4365-50 102-4365-51 102-4365-46

Description 1

•

Control Valve Control Valve Gasket (*9800138) Charge Pump Charge Pump Gasket (*9220327) Check Valve (*9800648) Seal Kit – Consists of Items 7 thru 11 Shaft Seal Housing Seal Retainer Seal Spring "0" Ring "0" Ring Retaining Ring (*9006320-0025) Charge Pump Rel. Valve Poppet (*9800597)

Cotter Pin (*90046-0607) Pin (*9220441) Washer (*9009610-2850) "0" Ring (*9004101-0140) Special Control Valve (*980-1303-1) Control Shaft Handle

* Sundstrand Part Numbers — Rebuilt Pumps Available at Spec. Price.

(C) FISCHE NO. 7 GRID B-23

Always Give Serial Number of Machine

No. Req'd.

1 1 1 1 1 1 1 1 6 2 1 2

1 1 1 1 3 1 1

111

Item No.

WATER PUMP — JABSCO

Part Number

Description

102-06440-01 1 2 3 4 5 6 7 8 9 10 11

102-06440-11 102-06440-12 102-06440-13 102-06440-14 102-06440-15 102-06440-16 102-06440-17 102-06440-18 102-06440-19 102-06440-20 102-06440-21 102-06440-22

Water Pump (Jabsco #8860), incls. the following: Screw (*SP1002-09) End Cover (*8865) Model 8860 Gasket (*7828) Impeller (*1414-37) Screw, Cam (*SP1002-01) Cam (*8089) Seal (*SP3000-10) Body (*7824) Slinger (*6342) Screw (*SP8019-02) Motor, Model 8860 (*SP8012-02) Service Kit, incls. items 1, 3, 4, and 7 (*8860-SK92)

477.49 (New 10/77)

No. Req'd.

1 3 1 1 1 1 1 1 1 1 2 1 1

*Part No's. are Jabsco, Costa Mesa, California.

(C) FISCHE NO. 7 GRID B-24

Always Give Serial Number of Machine

Rex

' Ramon

Rexnord Inc Milwaukee, WI 53201

Always Give Serial Number of Machine

( C) FISCHE NO. 7 GRID C- 1

477-50 (New 10/77)

Specify Quantity, Part Number and Description When Ordering

Always GiveSerial Numberof Machine

No. Item ..

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Part Number

No. Req'd.

Description

502-6299-80 Water Tank 298-19030-86 Spray Bar Socket Tee 3A x 3A" Pipe — Type 10-5 Side Cover, Water Tank 102-30219-1 Top Cover, Water Tank 102-30218-1 Gauge, Water Tank 102-30224-1 Shim, Water Tank 102-30223-1 Strainer, Water Tank — .

102-30212-1 See Separate Illustration 398-99006-31 Reducing Bushing — Galvanized 3A x % " 398-14006-87 Pipe Nipple % x 1 1/2" T.O.E. — Galvanized Hose 5/8 x 5" long 102-8224-17 Hose Clamp for % " I.D. 2 Ply Hose 298-9048-86 (Gates #7361-148) Water Pump (JABSCO #8860) 102-6440-1 See Separate Illustration Spray Bar — Front 102-3966-1 398-14008-24 Pipe Tee — 3/4 x 3/4 x %" — Galvanized 398-14000-90 Pipe Cap — Galvanized — 3A " "

1

16

2 2 1 2 6

17 18 19

2 10 2 8 2 2 1 4

Number

No.

1

2

1'40

Item

20 21 22 23 24 25 26 27 28

29 30 31 32

Description

No. Req'd.

16 .

Spray Nozzle 16 Orifice Tip for Nozzle 2 Pipe Plug 1 1/2" — Galvanized 2 Close Nipple 3/4" — Galvanized Street Elbow — Galvanized 5 3/8 x 90° 2 398-14001-11 Pipe Elbow 3/8 x 90° Galvanized 398-14010-23 Pipe Nipple 3/4 x 8" T.O.E. — 2 Galvanized 1 Bracket — For Pipe Tee 102-8718-1 1 398-14005-22 Pipe Tee — 3/8" Galvanized 2 Spray Bar, Rear 102-9292-1 2 398-14009-46 Reducing Coupling — Galvanized 2 Hose 5/8 I.D. x 38" long 102-8224-2 4 "U" Bolt (Jabsco Pump Mounting) 102-8899-1 "U" Bolt 1/4 ", with Nuts, 11/2" 298-1014-4 Between Legs, 2" Inside Length, 1" Thread Length (Chicago Hdw. & 4 Fixture Co. No. 05) 1 Hose — 3/4 " I.D. x 74" long 102-8224-5 1 Hose — 5/8" I.D. x 65" long 102-8224-3 1 Wire Set 102-30503-1 2 502-2799-80 Filler Cap

{102-6438-1 102-6438-5 398-14010-3 398-14009-1 398-14001-34

(C) FISCHE NO. 7 GRID C-2

co nst ructi o nm ach i n ery

WATER TANK AND PIPING TO VIBRATORY ROLL AND REAR WHEELS MODEL 900 OR 950 VIBRATORY ROLLERS

Reword Rexnord 477-52 (New 10/77)

111111111111

Inc

Milwaukee, WI 53201

Always Give Serial Number of Machine

WATER LINE STRAINER — 3/4" N.P.T. DELAVAN MFG. CO . #29857-1 REX PART NO. 102-30212-1 FOR MODEL 900 AND 950 VIBRATORY ROLLER

Item No. 1 2 3 4 5

Part Number 102-30212-10 102-30212-11 102-30212-13 102-30212-14

Description Pipe Plug 1/4" *16433 Cap *19798 "0" Ring *31352-031 Screen (80 Mesh) — *31500-4 Body *19799-1

(C) FISCHE NO. 7 GRID C-3

Specify Quantity, Part Number and Description When Ordering

No. Req'd.

1 1 1 1 1

Always Give Serial Number of Machine

Rexnoni 1111111111 II

Rexnord Inc Milwaukee, WI 53201

477.53 (New 10/77)

(C) FISCHE NO. 7 GRID C-4

Specify Quantity, Part Number and Description When Ordering

iii

Ramon

477-54 (New 10/77)

11111111111 MP. WI 'OM.

As. rum Kw.* anti ver oust 00.313• rnwrn.. Atr•n w r1A. Towns

•• 3

111• Mer l e s*

3L. In mem

••••

CLEARANCE CLOSES

3

t' • 3 Mott Pal Mall COMA Lem to ammo •milt loaor IM fiNiv/IL lAWI• IS. wens* aavuocl 3•01.111111111111111• PM allow.

STAND CLEAR AND DO NOT STAND ON LADDER WHEN ENGINE IS RUNNING.

• maws oramemi smut • Jett fftwa Lbw •oo•Ma N

Always Give Serial Number of Machine

WARNING

0► CRATING MIIITINCTIONS

■

Put iM11332;;;:3t

, Rexnord Inc MIlwoukee, WI 53201

•

i■ mrel. rJ

• 33.111111 - MN Wit•

■

• 1.311 3113111 4311 LIM a NM,. M nuvik.

no v....

• mots* mkt rent v.••• r r salon

USE STEERING FRAME LOCK WHEN SERVICING MACHINE.

B

Vi•PIATOINY SHAFT WITH1/4011

A

TOD7,5.VSAMS A 2 TOVErrEONHLITL L I *um.. 'you HAND L1.1.11

IOM

14001155T V12~1.22112 1121•1521 1211•02•22 2212211012,1212 4505?

111.11.1CIONT ACM 011212•••••=2221

F

INSTRUCTION PLATES & LABELS 'MODELS 848, 900 & 1300

A LUBRICATION PLATE 102-04650-01 B 102-04708-01 WARNING LABEL 102-30199-01 OPERATING INSTRUCTIONS

D 102-01282-01 SERIAL/MODEL NO. PLATE E 102-03248-01 LUBRICATION PLATE

F 102-09200-01 VIBRATION LABEL G 102-30189-01 CONTROL LABEL 102-08699-01 H FILTER INDICATOR LABEL 102-30190-01 ENGINE CONTROL LABEL

J 102-30194-01 WARNING PLATE K 102-30186-01 FREQUENCY ADJ. STOP LABEL L 402-01749-02 NAME PLATE - REX M 102-09222-01 THROTTLE LABEL LIGHTS LABEL 102-09220-01 0 102-08744-01 V.P.M. LABEL, 1800 P 102-09064-01 PNEUMATIC ISOLATOR 102-30193-01 Q 2 SPEED CONTROL

-41111wowomewm ■B,

TRAVEL

VIBRATOR

POPIVVA•I0

CONTROL ilACit

CONTI31 .s ■ 6,

N•UIPIAL

KHOO

AMOS

HYDRAULIC FILTER INDICATOR • k .4;1.4

swum

FILM- 1111.11111110111 INNEN 111111111CATOIN SNOWS ItIll WITH 111•11111 OIL

TYLL

PILL TO., STOP ENGINE

START ....•

WARNING DO NOT PUSH OR TOW VEHICLE UNLESS 2-SPEED SHIFT LEVER IS IN NEUTRAL POSITION

J

I

MODEL 900 ADD: R 102-30191-01 S 102-09510-01 T 102-09511-01 U 102-09512-01

FREQUENCY ADJUSTMENT . STOPS ADJUST TO 0••1121•0 C•CCC AND LOON KNURLS° NUTS

WETTING SYSTEM LABEL DUAL STEERING LABEL FUEL LABEL WATER LABEL

MODEL 1300 SUBSTITUTE: V 102-09152-01 V.P.M. LABEL, 1700 102-09343-01 PNEUMATIC ISOLATOR LABEL

FRONT REAR

ON ON AIL. ROLL D TIRE D „ TIRE

MICH DO NOT EXCEED 1800VPM

PNEUMATIC ISOLATOR

•

TO MAINTAIN 11110C.ATOIN .1112222/0V.A1.1 •IMMISSUA• MUST SA AT • ■ MI . PIMPAOVE COVAIN ••■ ONSOK vV

0

AkL•

EO M

WETTING

SYSTEM .„..

R

' CAUTION DO NOT OPERATE ROTH STEERING WHEELS AT THE SAME TIME

FUEL

S

WATER

PNEUMATIC ISOLATOR

DO NOT EXCEED 1700 VPM

(C) FISCHE NO. 7 GRID C-5

Specify Quantity, Part Number and Description When Ordering

TO AWINITINAIIN MIOUITCIPI APIPICENFICT-•VOIMINAI• MUST OM AT 21-34 PSI ANAROVII

Remold Always Give Serial Number of Machine

!11111111 I II

Rexnord Inc Milwaukee, WI 53201

477.55 (N ew 10177)

•

FUEL OIL WETTING SYSTEM FOR REAR DRIVE WHEELS MODEL 900 OR 950 VIBRATORY ROLLERS

Item No.

Part Number

Description

No. Req'd.

2 1 502-04836-80 Frame, Mat 2 2- 102-09381-01 Hook, Frame 4 3 102-01458-01 Wiper, Mat 40 4 298-00123-47 Hog Ring 4 5 298-00015-97 Washer, Special 2 6 102-06438-01 Nozzle, Spray 2 7 298-00081-01 Elbow, Male 1 Tube'/," O.D. x 56" long 8 102-8275-7 1 9 298-00087-01 Tee, Male 14" Tube Vi 0.D. x 32" long 1 10 102-8275-8 2 11 398-14000-10 Red. Bushing V," x Vt," 1 12 298-00046-98 Valve, Solenoid 1 13 102-30242-01 Bracket, Valve 1 14 398-14001-96 Close Nipple V," 1 15 298-00101-53 Valve, Needle 2 16 398-14006-79 Nipple '4" x 1 1/2 " Toe 1 Hose 1/4 " x 4 1/2 " Lg. 17 2556-8 2 18 298-09043-86 Clamp, Hose 1 19 398-14001-31 Street Elbow 1/4 " x 90° 1 Trip, Switch 20 102-09439-01 1 21 502-04864-80 Bracket, Switch 1 22 298-6547-17 Micro Switch 1 298-06123-17 Switch, Toggle 1 23 298-00052-17 Seal, Toggle 2 Grommet X7987 24 102-9440-1 Lever (Pump Control) 1 25 298-142-17 Cord Grip 1 26 102-6438-5 Orifice Tip for Spray Nozzle 2 (C) FISCHE NO. 7 GRID C-6 mimm immi'mw

Specify Quantity, Part Number and Description When Ordering

111

Rexnord Kexnord Inc Always Give Serial Number of Machine 11111111

1111

Milwaukee, WI 53201

477-56 (New 10/77)

OPERATOR SEAT

I 11

1

1 OPERATOR CONSOLE

ROLL OVER PROTECTION MODEL 900 AND 950 VIBRATORY ROLLERS ,

No.

Item

Part .Number

Description

1

102-09477-01 ROPS 1 298-00081-31 Cap Screw 102-30270-01 Back-up Bar Cut Washer %" 2 Cut Washer 16" Cut Washer 3/4" 502-04879-80 Seat Support Cut Washer 1/2!'

Cap Screw 1/2" x 1" Lock Washer 1/2" Lock Nut 1/2" Cap Screw 1/2" x 3 1/2" Cap Screw 5/3 x 21/4" — Grade 8 298-79-93 298-02014-71 Lock Nut- %" 398-02002-22 Cap Screw 1/2" x 1 1/2" H.T. 298-02010-71 Lock Nut 1/2"

No. Req'd.

1 8 2 8 10 8 2 1 4 5

1 1

8 8 10 10

* Used to bolt Fenders to Tank Shell. **Used to bolt Tank Shell to Main Frame.

(C) FISCHE NO. 7 GRID C- 7

Specify Quantity, Part Number and Description When Ordering

111

477.57 (New 10/77)

IN

i Remon

11111111111

Rexnord Inc Milwaukee,

WI 53201

Always Give Serial Number of Machine

Specify Quantity, Part Number and Description When Ordering

SpecifyQ uantity, Part N umberandDescriptionWhen Ordering

Part Number

It No.

Description

502-7124-80 Main Frame 502-5997-80 Fuel Tank Filler Cap 502-2799-80 Tank Support Spacer 102-7948-1 Tank Strap 502-2213-81 398-99003-38 Cotton Belting 6 x 2 Pin 502-8082-80 Steering Lock 502-8081-80 Pin 298-131-47 Cotter Pin 6 x 21/2" , 398-3000-25 Strainer 298-5010-92 10 Water Tank Shim 102-30223-1 11 502-6423-80 Battery Box 12 { 102-9741-1 Spacer 6 x 21" — Plywood 3/8" th.

102-9741-2 Spacer 2 x 21" — Plywood %" th.

Ladder 502-4827-80 13 102-30221-1 14 Handrail — Rear — Side 502-4828-80 Handrail — Front — L.H. 15 502-4828-81 16 Handrail — Front — R.H. 17 298-4029-86 Slip On Coupling 502-6496-80 Fender — L.H. (As Illustrated) 502-6496-81 Fender — R.H. (Opposite of Illustration) 1 2 3 4 5 6 7 8

9 1

18

1

No. Req'd.

Item No.

Part Number

1 1 3 2 4 15 2 1 1 1 1 3 1 1 1 2 2 1 1 2 1

19 20 21 22

102-9904-1 102-9282-1 298-5711-68 102-9509-1 398-2002-13 398-20000-39 502-6299-80 102-30224-1 502-6434-80 502-6503-80 502-6033-80 502-4457-80 102-30513-1 502-20056-80 102-4520-1 102-4520-2 502-6334-80 402-1749-2 • 102-9266-1 298-17011-86 502-6268-80 102-9746-1

23

24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

1

(C) FISCHE NO. 7 GRID C-9

Description Cover — Fender Holes Seat Complete with Pedestal • Shear Sandwich Mount Washer Can Screw 1/2 x 3/4" U.N.C. .

Lock Washer 1/2" Water Tank Liquid Gauge Cover — Console Operators Console Grill Removable Grill Belt Guard Engine Hood Side Panel — L.H. Side Panel — R.H. Front Engine & Tank Shell Name Plate — Rex Pipe — Handrail Socket Tee — 1" Pipe Radiator Shroud Bracket — Mounting Angle

No. Req'd.

2 2 2 4 4 4 1 2 1 1 1 1 2 .1 1 1 1 3 1 1 1 2

Always GiveSerial Numberof Machine

FRAME, FENDERS, ENGINE COMPARTMENT, FUEL TANK, WATER TANK & PLATFORM MODEL 900 AND 950 VIBRATORY ROLLERS