REX 5-8 & 7-10 ton Steel Wheel Roller Repairs Parts Manual - PDF DOWNLOAD

BULLETIN 443 - A 5 - 8 & 7 - 10 TON STEEL WHEEL ROLLER SERIAL NO. HR-136 Thru HR - 220 FEBRUARY 1973

REX CHAINBELT INC. CONSTRUCTION MACHINERY SECTION, MILWAUKEE, WISCONSIN 53201 MANUFACTURERS OF: Truck Mixers Building Mixers Pumps Pumperete Airport and Road Forms Road Pavers Spreaders Finishers Floats Spray Cure Machines Subgrade Planer and Tester Slurry-Matic

Conveyors Road Batch Plants Central Mix Plants Dry Batch Plants Automation Pulvi-Mixers Trav-L-Plants Pneumatic Compactors Steel Wheel Rollers Material Spreaders Concrete Breakers REX Pactor

P 1B

Always Give Serial Number of Machine

INSTRUCTIONS FOR ORDERING PARTS Order repair parts from your Rex distributor. Specify quantity, part number and name of part.

Do not order by reference number or state quantity wanted in terms of sets or pairs.

Always give serial number of machine. This is very important. The serial number is stamped on manufacturers' plate which is attached to the frame of machine.

Be particular to give complete shipping address mentioning town, county, and state. Also give billing instructions and address. Tell whether to ship via parcel post, express, air express, or freight.

DAMAGE CLAIMS When broken goods are received, a full description of the damage should be made by the carrier agent on the freight bill. If this description is insisted on, full damage can always be collected from the transportation company.

We assume no responsibility for delay or damage to merchandise while in transit. Our responsibility ceases upon delivery of shipment to the transportation company, from whom a receipt is received showing that shipment was in good condition and properly packed when delivered to them; therefore, claims for parts lost or broken in transit should be made

BY YOU to the transportation company.

REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

INDEX

BULLETIN 443-A REXROL 5-8 TON REXROL 7-10 TON STEEL WHEEL ROLLER EFFECTIVE SERIAL NO. HR-136 THRU HR-220

Description CONTROLS ASSEMBLY DAMAGE CLAIMS AND INSTRUCTIONS FOR ORDERING PARTS

Page No. 13, 14 -43 44 P1B

FRAME Frame, Covers, Hood, Previous to HR-201 Frame, Covers, Hood, Effective HR-201

19, 20, 21 23, 24, 25

GEAR CASE Reduction Gear Case Assembly

15, 16, 17

HYDRAULICS Hydraulic Filter and Tank Hydraulic Lines — Ford 240 Gas Hydraulic Lines — Ford 242 Diesel Hydraulic Motor (Sundstrand) Hydraulic Pump — Steering (Webster) Hydraulic Pump (Sundstrand) Hydraulic Ram — Steering Hydraulic Tank and Filter Hydraulic Valve — Steering HR-101 — HR-170 and HR-186, up Hydraulic Valve — Steering HR-171 — HR-185 approx.

INSTRUCTIONS FOR ORDERING PARTS AND DAMAGE CLAIMS INSTRUMENT CONSOLE LIGHTS

40 5, 6 11, 12 22 26 10 32 40 31 18 P1B 4 41

OPTIONAL EQUIPMENT Optional Gravity Feed Sprinkler System Optional Pump Feed Fog Spray System

33, 34 35, 36

POWER UNITS Ford 240 Gas Ford 242 Diesel

1, 2, 3 7, 8, 9

ROLLS Drive Roll Guide Roll

27, 28 29, 30

WATER PUMPS Centrifugal Water Pump (Optional) Water Pump (Jabsco)

37, 38 39

39 40 23

61

•v •s,

NI03 1 NI tld

22 m

2

FORD 240 GAS ENGINE & ACCESSORIES

03 1,41 7Ad V •S 'il

X 0

I

z

rn FORD 240 GAS ENGINE & ACCESSORIES

0

Item No.

Part Number

1

102-7195-1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 , 26 27 28 29 30 31

*N-5-1 *N-6-3 *N-8-1 *N-11-17 *N-7-1 *N-25-3 *N-20-1 *N-53-3 *N-105-2 *N-43-1 *N-21-1 *N-3-4 *N-114-3 *P-104-5 *C5JC-9450-A 102-7160-1 298-5515-68 502-2509-80 502-3934-80 102-7317-1 298-5106-92 _ 102430- -) - 102=-516#1102-7360-1 102.4459-1 - - - - 102-61203 298-6085-17

Description

No. Req'd.

Ford 240 Gas Engine — Includes Items 2 thru 16 1 Fuel Pump Assembly w/Filter 1 Flywheel Housing S.A.E. 4' 1 1 B6P-A Starting Motor Alternator 12V 1 Flywheel Assembly REX No. B-2L21-13 1 Distributor — Tach. Drive 1 Governor — Mech. Var. Speed 1 Water Outlet 1 Carburetor Air Horn • 1 Power Steering Pump less Reservoir 1 Front Engine Support 1 1 Carburetor Assembly Alternator Regulator 1 Muffler 1 Exhaust Flange Gasket '1 Engine Fan 1 Cap Screw %," x 1" H C -H T. 4 Rubber Engine Mount 2 Front Engine Support 1 Cap Screw 1/2" x 3" w/C.W. & Lock Nut 2 Oil Drain Tube 1 Regulator Mounting Bracket 1 Right Angle Tachometer Drive 1 Flex Shaft — Tachometer 1 Drive Plate 1 Drilled Cap Screw w/Lock Wire 12 Adapter Flywheel Hsg. to Pump 1 Cap Screw 3/8 " x 11/2" w./1., IN 12 Hydraulic Pump (See Sep. Illus.)

1 1 Neutral Start Switch

Item No.

Part Number

32 33

102-6973-1

34 35 36

502-2157-80

37 38 39 40 41 42 43 44 45 46 47

102-6116-1 - - - - 402-624-2 102-7362-1 102-7361-1 102-1749-1 *B6A-11450-A

48 49 50 51 52 53 54 55 56 57 58 59

298 128-47 502-1896-80

102-8029-1 298-127-47

298-9043-86 298-5652-68 298-2071-62 298-35-98 298-8030-86 298-26040-17 298-26033-17 298-3252-17

Description Special Nut Cap Screw 1/2" x 11/2" H.C.-H.T. w/CAV. & L.W. Stop Bracket Sq. Hd. Set Screw 3/8 " x 1 1/2" w/Nut Set Screw, Sq. Hd. Oval Pt. 'A" x 2" w/Nut Lever — Hyd. Pump Hex Nut Drive Plate Hub Drilled Cap Screw w/Lock Wire Center Bonded Joint Solenoid Bracket Solenoid Cap Screw 'A" x 3/4" w/L.W. & Nut Throttle Cable Throttle Cable Clip Machine Screw (R.H.) --78-32 x 58" w/L.W. & Nut Throttle Cable Bracket Filter Bracket Cap Screw 5/ 6 " x 1" Brt. Fuel Hose Clamp Fuel Hose Union Adapter 1/4 " x 90° Fuel Cock Adapter Fitting Cable Battery Cable Battery 12V Carriage Bolt 5,16" x 10" w/C.W.,L.W., Nut

No. Req'd.

4 1 2 1 1 2 1 6 12 1 1 2 1 1 1 1 1 2 1 1 1 1 2 1 1 1 2

Alw ays G ive Seri al Number ofMachine

In

''V S '11NI031NI LIcl

FORD 240 GAS ENGINE AND ACCESSORIES FOR REXROL

0

Item No.

Part Number

60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

298-46-47 298-26030-17

75 76 77 78 79

102-3390-1 102-3388-1 298-20-98 102-3391-1 298-9013-86 298-5648-68 102-3527-1 102-33934 102 -3392 4 298-5036-92 102-1703-1 102-1703-1 298-5074-92 298-9027-86 298-5655-68

Description Frame & Clamp Battery Ground Cable Cap Screw 3/8 " x 1" w/L.W. & Nut Radiator Support (R.H.) Radiator w/Oil Cooler Drain Cock Radiator Support (L.H.) Cap Screw 1/2 " x 1 1/4" w/C.W.,L.W. & Nut Hose Clamp Lower Radiator Hose Upper Radiator Hose Radiator Shield Cap Screw %," x 11/4" w/L.W. & Nut Shield Bracket Air Cleaner Cap Air Cleaner — Oil Bath Type Donaldson #FGA09-0020 Air Cleaner Air Cleaner Mounting Band Cap Screw 3/8 " x 11/4" Air Cleaner Hose Clamp Hump — Reducer

No. Req'd.

1 1 16 1 1 1 1 4 4 1 1 1 8 1 1 1 1 2 4 1 1

Item No.

Part Number

80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

298-9019-86 298-5122-92 198-2072-62 102-3544-2 298-5122-92 102-3544-6 502-2634-80 298-124-47 298-5042-92 102-4554-1 102-7078-1 298-241-47 298-242-47 102-7077-1 102-7957-1 298 -161-47 X203699 102-7598-1 502-2829-80

Description Hose Clamp Tube 2 1/2" x 11 3/x" Rubber Ell 45° Tube 2 1/2" x 3" Rubber Elbow 2 1/2" x 90° Tube 2 1/2" x 13 %" Exhaust Pipe Exhaust Pipe Clamp Exhaust Pipe Extension Wire Set Throttle Wire Bracket Collar Assembly Pivot Carburetor Clip Choke Cable Carburetor Clip Rubber Strip (Not Illustrated) Drain Hole Cover (Not Illustrated) Ground Wire — Fuel Tank (not Illus.)

No. Req'd.

8 1 3 1 1 1 1 1 1 1 1 2 1 1 1 2 1 1 1

ce

•

*Ford Motor Co. part numbers.

ai 0

CD

•V•S '11 NI G3 1N.d

Item No.

w

rn ri

z

Part Number

4 5

102-8029-1 298-6067-17

6

298-6068-17

7

298-6019-17

8 9

10

11 12 13 14 15 16

1102-8031-1 102-8032-1 1102-7957-4 102-7957-1 102-7957-2 -298-6114-17

102-4375-1 *SW440343 *SW444553 *SWG442681 298-3002-17 *SWG441207

-

No. Req'd.

Description

Throttle Cable Gas — Diesel Starter Switch — Cole Hersee Co. #9216, Push Button Ignition Switch — 12 Volt — Cole Hersee Co. 495522A, Key No. 83357 Light Switch — 3 Way — (see Lighting System Diagram) Ident. Plate — Ford 240 Gas Ident. Plate — Ford 242 Diesel Engine Stop Switch — Diesel only Engine Stop Cable — Diesel only Choke Cable — Gas only Emergency Stop Switch — Diesel only Emergency Stop Cable — Diesel only Accessory Drive Switch — Pump Feed & Gas Power — Also, see Page 443S — 28 Instrument Cluster, Items 12 thru 16 Ammeter Ga. Oil Pressure Ga. Water Temperature Ga. Hour Meter (See Sep. Illus.)

Fuel Gauge

1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1

INSTRUMENT CONSOLE — GAUGES — PLATES MISCELLANEOUS FITTINGS — NOT ILLUSTRATED Part Number

Description

502-6022-80

Instrument Console — Eff. Prey. to HR201 Instrument Panel Eff. HR 201, up Rd. Hd. Mach. Screw %," x 1 /2 " w/L.W. Ident. Plate — Sprinkler — Gravity Feed, as Illus. Eff HR 201, up Drive Rivet Ident. Plate Sprinkler — Pump Feed, not Illus. Eff. HR 201, up Drive Rivet

Item No. 1 2

502-4513-80 _

3

102-8332-1

298-5000-34 - 102-8134-1 298-5000-36

No. Req'd.

1 1 4 1 4 1 4

17 18

298-2066-56 298-8052-86

19

298-2067-56 p98-5556-68 298-5688-68

20 21 22 23

102-2701-1 203027-1

Oil Pressure Sending Unit Fitting — Male 1/4" - 18 NPT for 3 8" I.D. Hose — Aeroquip #4738-4-6B Water Temperature Sending Unit Rubber Chan. Strip V' x 3/8 " x 9 172 Rubber Chan. Strip ,6,11 x 34" x 9'," Cap Screws 51 ," x 3/4 " Hose — Oil Pressure Ga. Instrument Cluster Wire "

* Stewart Warner Part Numbers

1 1 1 1

1 4 1 2

Alwa ys G ive Serial Number of Machine

0

m C/2

cD

STEERING PUMP

P..

29

0

31

CD ti

a b .

0 tcl

•v •s .n NI03 INI dd

m

m

z rn

z

0

HYDRAULIC LINES FOR REXROL 8-12 WITH FOPD 240 GAS POWER

Always GiveSerialNumber ofMachine

co

NIC13 1 N1 Hel •v •s •r,

x 0 I

w

Item No

Part Number

1

502-1347-99

2

502-1347-93

C)

pecify Q uanti ty,Part N umb er and Descripti on Wh en Ord eri ng

3

502-1942-80

4

102-2848-1

5

102-3222-1 502-149-80

7

8 9

102-3403-1

102-2847-3 102-2927-1

10

102-3519-1

11 12 13 14 15

102-3400-1 102-1594-2 102-1594-3 102-1594-4 602-4857-1 .. 7 298-102-53

16 17

_102-3389-1 298-6517-86

18

298-6516-86

Description Hose 1/2" I.D. Aeroquip 2556-10 4' -9'4" Long — 298-8018-86 Male Pipe Fitting to 298-8017-86 Swivel Fitting Hose '/2" I.D. Aeroquip 2556-10 7' -9'4" Long — 298-8018-86 Male Pipe Fitting to 298-8017-80 Swivel Fitting with 298-8015-86 Male Adapter Hose %" I.D. x 2' -5'"Long Aeroquip 2556-10, 298-8017-86 Swivel Fitting Both Ends Hose — Female 3/4" NPTF to Male 3/4" NPTF with Swivel Hose — Male 3/4" NPTF w/Swivel to Female 1V 6 " -12 Hose 3/4" I.D. x 1 '4," O.D. x 48" Long, One End Plain, Other End 298-8003-863/4" NPTF Hose 34" I.D. x 68" Long, 946 " -18 F, Swivel — 37° JIC & Inverted Flare Tube Nut %" -18" Thread Hose 34" I.D. x 89" w/% 6 " -18 Female Swivel — 37° J.I.C. Flare — Both Ends Hose 1", Hi-Press, 30" Long w/Flanged Head for 1" S.A.E. Split Coupling — Both Ends Hose 1" w/Flanged Head for 1" S.A.E. Split Coupling — Both Ends Steering Cyl. (see sep. Illus.)

Flange Halves — Plated Cap Screw — Plated "0" Ring Hydraulic Tank Assembly (see sep.

Illus.)

Hyd. Steering Valve — "Gresen" — See Footnote & see page 443-13 Bracket — Steering Valve Fitting — 90° Elbow Male ',"2" NPT to Male -18 J.I.C. — Eastman F-236x8 Fitting — 90 ° Elbow w!"0" Ring — Eastman z-,F28 — 6 x 6

No. Req'd.

Item No.

Part Number

19 20

298-57-53 298-2068-62

21 22 23

298-2147-62 298-14502-86 298-2095-62

24 25 26 27

298-8078-86 298-8030-86

28

102-3388-1

29

298-14511-86

30

298-6501-86

1

31

N-43-1

1

32 33 34

298-2174-62 298-101-53 298-2143-62

35

102-2758-7

36 37

298-9018-86 102-6120-3

38

102-6121-3

1

1 1 1 8 16 4

No. Reg'd.

Description Filter — Hyd. Oil (see sep. Illus.)

Adapter Fitting — 90° Male 3/4" NPT to Female 3/4" NPT — Anchor 1Z-MA-1Z UFS Adapter Reducing Bushing 3/4" to 'A" PT Adapter /16 " -18 , "0" Ring x ',4" — 90° Street Elbow 1/2" x 90° Straight Adapter 3/4" Male to Female Street Elbow 1/2" x 45" Adapter Fitting %" Male NPT Both Ends Radiator w/Oil Cooler — Yates — American # RD-LL-7024 Reducing Bushing 11/4" x 34 Male to Female — Parker Hannifin #0102-20-12 Street Elbow 3/4" x 90 ° — Parker Hannifin #2102 Power Steering Pump — Ford — see Engine Parts Book Straight Adapter 1/4" NPTF x ',/4" NPSM Needle Valve 'A" NPTF Straight Adapter 3/4" Male NPTF to '46"18 J.I.C. — Anchor #4M-6JMS Hose 3/4" I.D. x 13/4" O.D. x 31" Long x 3/4" NPT Male — Both Ends Hose Clamp Hyd. Pump — Sundstrand — (see page 443-4) Hyd. Motor — Sundstrand — (see page 443-10)

2

3 1

"

1 1 1

1 3 1 2

*The above "Gresen" Valve will always be furnished for service. Machines may be equipped with Alternate "Energy" Valve. Also, Energy Valve Linkage not needed for Gresen Valve, so discard Items 34, 35, 36 & 37 on Page 443S-15.

2 2 1 1 1 1 1 1 1

Always G iveSeri al Numb er ofMachine

HYDRAULIC LINES FOR REXROL 8-12 WITH FORD 240 GAS POWER

89

cc).--74

35

36

90

9

34

33

CU

81

ify Q uanti ty , Part N umber and Descripti on W henOrd ering

75 79 75

80 75

5

77

82

88

78

88

30 75

70

91

69 24

21 68

67

22

29

31 38

17

J

47 43' ‘°°

52

51 8-44 ,44c 5 45 58

63

m x.

2

13

72 13 12

inw 2

55

-C)

14

60

57

48 / 46

49

t

39 40 1L-41 43 42

56

FORD 242 DIESEL ENGINE & ACCESSORIES-

Always G ive Serial Number of Machine

1

m

25 26

61

64

62 •Y •S •r1NI 034. NI I:Id

31

•v . s •ri NI031 NI Eld

mm

.r.,

0

0,

0

.

cD

8 O

0 I.

FORD 242 DIESEL ENGI NE & ACCESSORIES Item No.

Part Number

1

102-7341-1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

*7-H/2 *D-114-2 102-7342-1 298-5130-92 102-7219-1

25 26

502-2157-80

27

5411

m

*D-11-7 *D-11-13 *D-8-9 *D-7-15

28 29 30 31

298-5515-68 502-4295-80 102-3503-1 502-5164-1 102-7360-1 102-3538-1 102-3537-1 102-6120-3 298-6085-17 102-6973-1

402-624-2 102-7362-1 102-7361-1 102-1749-1 *B6A-11450-A

Description Ford 242 Diesel Engine — Includes Items 2 thru 7 Generator — Am. Pos. Ground Generator Support Bracket Starting Motor — Electric Solenoid Type Flywheel — Special for long i#S-11 Converter Group — Engine P.T.O. Voltage Generator Power Steering Pump Muffler Engine Fan Cap Screw 5/1 ," x 1" H.C.-H.T. w/L.W. Rubber Engine Mount.

Front Mounting Bracket Cap Screw 1/2" x 2 %" w/C.W., L.W. & Nut Flex Shaft Tachometer Drive Plate Drilled Cap Screw w/Lockwire Pump Adapter Flywheel Housing to Pump Cap Screw 38" x 1 1/2" w/L.W. & drilled Flywheel Adapter Hydraulic Pump — Sundstrand Neutral — Start Switch Special Nut Cap Screw 1/2" x 1 1/2" A.C.-H.T. w/C.W. & L.W. Stop Bracket Sq. Hd. Set Screw 3/8 " x 1 1/2 " w/Nut Drive Plate Hub Cap Screw — Drilled w/Lockwire Cap Screw Soc. Hd. 5 `, 6 " x 1" Center Bonded Joint Solenoid Bracket Solenoid

No. Req'd.

1 1 1 1 1 1 1 1 1 1

4 2 1 2 1 1

12 1 12 1 1 1 1

4 1 2 1 6 6 12 1 1

Item No.

Part Number

32 33 34 35

102-8029-1 298-161-47

36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

102-3553-1 502-1896-80 298-2071-62 298-35-98 298-8001-86 102-7218-1 298-9043-86 298-2059-1

502-1338-88

102-3554-1 298-26040-17 298-26033-17 298-3254-17 298-252-47 298-26028-17 502-3934-80 102-3449-1 298-5054-92 298-20-98 102-3445-1 102-3446-1

Description Cap Screw 1/4" x 3/4" w/L.W. & Nut Throttle Cable Throttle Cable Clip Machine Screw (R.H.) 8-32 x w/L.W. & Nut Throttle Cable Bracket Hydraulic Filter Bracket Cap Screw 5/16 " x 1" Brt. Union Adapter 1/4" x 1/4" x 90° Fuel Shut-Off Cock Connector Fitting 1/4" x %" Fuel Hose — Suction Hose Clamp Tube Nut Copper Tubing 5/1," x 3" Street Ell 1/4" x 90° Street Ell '/8 " x 90° Reducing Bushing 1/4" x %" Fuel Hose — Return Close Nipple '/8 " Pipe Tee '/8 " Line to Fuel Filter (Ford) Regulator Bracket Cable Battery Cable Battery (12V) Carriage Bolt '/1," x 10" w/L.W. & Nut Frame & Clamp Battery Ground Cable Oil Drain Tube Radiator Oil Cooler Radiator Drain Cock Radiator Support Radiator Support .

No. Req'd.

2 1 2 1 1 1

2 2 1 1 1 1

2 1 1 1 1 1 1 1 1 1 1 1 1

2 1 1 1 1 1 1 1 1

FORD 242 DIESEL ENGINE & ACCESSORIES

m Item No.

1:3cp

n.

66 67 68 69 70 71 72 73 74 75 76 77 78 79

0

ht,

CD eL ti..

cD 0

CD

m x

102-7077-1 102 4555 1

m

101

502-2829-80

Ground Wire — Fuel Tank (not Illus.)

97

102-3447-1 102-3448-1 102-5681-68 298-9013-86 298-5686-68 298-5036-92 298-9019-86 298-5042-92 102-1703-1 298-5074-92 298-5655-68 102-3544-5 298-5122-92 502-2669-80 298-9019-86 502-2519-81 298-168-47 298-5558-68 102-7664-1 298-63-47 298-5104-92 298-5042-92 502-4195-80 102-7957-1 102-7078-1 298-161-47 298-241-47 298-242-17 102-7079-1

•

4 6 1 1 9

1 4 1 1 6 1 1 2 1

1 1 1 1 1 2 1 1 2

1 1 1 1 1 1 2 1 1 1 4 1 1

1

Alwa ys G ive Serial Numb er of M achine

98 99 100

81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96

13 6'

No. Req'd.

Description Cap Screw 1/2" x 11/4" w/C.W., L.W. & Nut Cap Screw 3/," x 1" w/L.W. & Nut Radiator Shield Shield Bracket Cap Screw 54," x 1" w/L.W. & Nut Upper Radiator Hose Hose Clamp Lower Radiator Hose Air Cleaner Cap Hose Clamp Extension — Air Stack Air Cleaner w/Clamp Air Cleaner Mounting Band & Bolt Reducing Hump Tube 2 1/2" x 11 3/4" Rubber Elbow 2 1/2" x 45° Tube 2 1/2 " x 141/2" Hose 23/4" Dia. x 3" Air Intake Elbow Pipe Clamp with U-Bolt Flex Bolt Mounting Support — Muffler Clamp Muffler Clamp with U-Bolt Tractor Cap Exhaust Extension Exhaust Pipe Exhaust Gasket (Ford) Choke Cable Throttle Wire Bracket Carburetor Clip Collar Assembly Pivot Cable Pivot Carburetor Main Screw #10-24 x 38" Carburetor Clip Wire Set (Not Illustrated) '

80

ca

Part Number

Always Give Serial Number of Machine

443A-10

•

10

/

11

31

•

•

0 0

12 8 9 10

■ 111111111 13

O 14 15 16

-

11

11T O

18

O

HYDRAULIC PUMP FOR REXROL 8-12 SUNDSTRAND MODEL NO. 22-2029 REX PART NO. 102-6120-3 Item No.

Part Number

Description

No. Req'd.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

102-4365-4 102-4365-6 102-4365-8 102-4365-11 102-4365-12 102-4365-1 *9210247 *92 10248 *9220242 *9004102 *9004100-2340 102-4365-47 102-4365-52 102-4365-48 102-4365-49 102-4365-50 102-4365-51 102-4365-24 102-4365-46

Control Valve Control Valve Gasket Charge Pump Charge Pump Gasket Check Valve Seal Kit — Consists of Items 7 thru 11 Shaft Seal Housing Seal Retainer Seal Spring "0" Ring "0" Ring Retaining Ring Charge Pump Rel. Valve Poppet Cotter Pin Pin Washer "0" Ring Orifice .042 Dia. Control Shaft Handle

1 1 1 1 1 1 1 1 6 2 1 2 1 1 1 1 3 1 1

Sundstrand Part Numbers.

REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

a o p=w, "EX 4y

SpecifyQ uanti ty, Part N umb er and Descripti on W hen O rdering

31

STEERING PUMP

20

,

0

z1

MN-

I??

27

m

X

w i z 0

33 32 23

17

c

11

auo XAVAtirV

25--v miumiN

8 18

12 13 14 27

HYDRAULIC PIPING FOR REXROL 8-12 WITH FORD 242 DIESEL POWER.

HYDRAULIC PIPING FOR REXROL 8-12 T m z z

z

in r4

Item No.

Part Number

1

502-1347-99

2

502-1347-93

z

3

Q uantity, Part N umber and Descripti on W henOrdering

rAVek

m X

4

102-2848-1

5

102-3222-1

6

102-2758-4

7

102-2760-2

8

102-2847-3

9 10

11 12 13 14 15

102-2927-1

102-3519-1

102-3400-1 102-1594-2 102-1594-3 • 102-1594-4 602-4857-1 298-102-53

16 17

102-3389-1 298-6517-86

18

298-6516-86

19

298-57-53

Description Hose I/2" I.D. - Aeroquip 2556-10 4"-9 14" Long - 298-8018-86 Male Pipe Fitting to 298-8017-86 Swivel Fitting Hose 1/2" I.D. - Aeroquip 2556-10 7"-91/8 " Long - 298-8018-86 Male Pipe Fitting to 298-8017-86 Swivel Fitting with 298-8015-86 Male Adapter Hose 54" I.D. Aeroquip 2556-10 with 298-8017-86 Swivel Fitting - Both Ends Hose - Female 3/4" NPTF to Male 34 " NPTF with Swivel Hose - Male 3/4" NPTF with Swivel to Female 1 1/6 ' 1 -12 Hose 3/4" I.D. x 1 1/4" O.D. with 3/4" Male NPT - Both Ends Hose IA" I.D. - 1750 # Max. Press. with 1/2" Male NPT - Both Ends Hose %" I.D. x 89" with 9/16 11 - 18 Female Swivel & 37° J.I.C. Flare - Both Ends Hose 1" Hi. Press. 30" Long w/Flanged Head for 1" S.A.E. Split Coupling Both Ends Hose 1" Hi. Press. - 29 1/2 " Long w/ Flanged Head for 1" S.A.E. Split Coupling - Both Ends Steering Cyl. (see sep. Illus.)

Plated Flange Halves Plated Cap Screw "0" Ring Hydraulic Tank Assembly (see Sep. Illus.)

Hyd. Steering Valve - "Gresen" - see Footnote & see Page 443-13 Bracket - Steering Valve Fitting 90° Elbow - Male 12" NPT to Male %," - 18 J.I.C. - Eastman F-23-6 x 8 Fitting 90 Elbow w/"0" Ring Eastman #F-28-6 x 6 Filter - Hyd. Oil (see Sep. Illus.)

No. Req'd.

Item No.

Part Number

20

298-2068-62

21

298-2075-62

22

298-2067-62

23

298-2095-62

1

1

1 1 1 1 1 1

1

1 1 8 16 4 1 1 1

2 1 1

24 25 26 27

298-8078-86 298-8030-86 298-5054-92 - - - - -

28 29 30 31 32 33

102-7342-1 298-2174-62 298-101-53

34

298-2143-62

35

102-2758-7

36

102-6121-3

37 38 39

298-14502-86 102-7599-1 102-6120-3

Description Adapter Fitting 90 Male 3/" NPT to Female 34" NPT - Anchor #12-MA-12 U.F.S. Union 90° Adapter 1/2" NPT Male to 1/2" NPT Female - Anchor 8MA-8 U.F.S. Union Adapter - Male 3/4" NPT to Female 1/2" NPT - Anchor #12MA8 U.F.S. Adapter Elbow 90 ° - 9/,6 11 -18-"0" Ring x 1/4" NPT Street Elbow 1/2" x 90° Straight Adapter 3/4 " Male to Female Street Elbow 1/2" x 45° Adapter Fitting 5$" Male NPT - Both Ends Oil Cooler - Perfex Corp. A18-953 Reducing Bushing 11/4" to 3/4" Street Elbow 3/4" x 90 ° Power Steering Pump (see Page 443-14) Straight Adapter - 1/4" NPTF x 1/4"NPSM Needle Valve 1/4" NPTF Skinner #F-221-000 Straight Adapter 1/4" Male NPTF to 94," 18 J.I.C. Thread Anchor #4M-6JMS Hose 3/4" I.D. x 1 1/4" O.D. x 31" Long 3/4 1' NPT Male - Both Ends Hyd. Motor - Sundstrand (see Page 44310) Reducing Bushing 3/4" x 1/2" P.T. Nylon Spiral Sheve - (not Illus.)

Hyd. Pump - Sundstrand - (see Page 443-4)

*The above "Gresen" Valve will always be furnished for service. Machines may be equipped with alternate "Energy" Valve. Also Energy Valve Linkage not needed for "Gresen - Valve, so discard Items 34, 35, 36 & 37 on Page 443S-15.

No. Req'd.

4

1 ti

1 3 1 2 1 2 2 2 1 1 1 1 1 1 1 1 1

0

TWO—SPEED SHIFT

21

7.1

STEERING

28 29

BRAKE

VA; FORWARD & REVERSE

40

42 g

43 --` g--46 ---44 g 45 --95

39 q,,v r

41

-42 43 V-- 46

47

tV544

45

FORWARD 66 REVERSE

4

oi

44.

x

0

z

w r:,

z

C)

6/#q) HYDRAULIC PUMP (#4 at

CONTROLS ASSEMBLY REX PART NO. 602-4848-4

cp

m

0

173 F1 ''„

—

6

z

z C)

CONTROLS ASSEMBLY REX PART NO. 602-4848-4 Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

502-6047-80 298-48-47 502-1957-80

17 18 19 20 21 22 23 24

102-1325-1 298-7004-8 102-1336-1

Description Deck Plate — Controls Knob Forward & Reverse Lever Sq. Hd. Cup Pt. Set Screw 34" x ' Woodruff Key #808-1/4" x 1" Bearing Bushing Keeper Cap Screw 34" x 1" w /C.W. & Nut Disc Plate Clutch Disc Throttle Shaft Cut Washer 34" Spring Nut 34" Threaded Rod Ball Joint Nut 3/8 " UNF Throttle Link Rod — G.M. — Diesel Throttle Link Rod — Ford — Gas Link — G.M. — Diesel Link — Ford — Gas Lever — G.M. — Diesel Lever — Ford — Gas Two-Speed Lever Lever Extension Brake Link Rod Throttle Cable .

h

102-1339-1 102-1335-1 502-2813-80 102-1326-1 102-1340-1 IX7887 _1102-6079-4 102-6080-2 {502-2228-84 502-2228-82 {502-2027-82 502-2027-81 102-3778-1 102-8219-1 102-6079-2 102-8029-1 1

No. Req'd.

Item No.

Part Number

1 3 2 2 4 3 3 3 6 2 2 1 32 8 31 4 7 7 1 1 1 1 1 1 1 1 1 1

25 26 27 28 29 30 31 32 33 34

102-3777-1 502-4491-80 -502-8117-80 ' 298-239-47 298-146-47 298-240-47 102-7079-1 298-8007-4 502-2806-80

35 36

102-8145-1

37

102-3743-1

38 39 40 41 42 43 44

102-3334-1 502-1959-80 402-1596-2 102-1334-1 102-1326-1 - - - 298-58-47

45 46 47

298-153-2 502-1994-80

Description Gate for Two-Speed Lever Two-Speed Box Steering Lever Spoon Latch Machine Screw #10-24 x 34" Cable Clamp Tube Clamp Cable Pivot Shoulder Bolt Steering Valve Link — "Energy" Valve only .

Link Bar — "Energy" Valve only Cotter, Pin '4 6 " x 3/4" "Energy" Valve only Steering Valve Bracket — "Energy" Valve only Decelerator Cable Brake Lever Brake Pedal Pawl Spring Cap Screw 34" x 11/2" w/C.W. & Nut Ball Plunger — VLIER #I3L-58N — 34" — 16 NC Thread Pillow Block 1" Cap Screw 3 8 " x 1" Brake Shaft 1"

No. Req'd.

1 1 1 1 4 3 1 1 1 1 1 1 1 1 2 2 2 2 8 2

2 16 1

Specif y Q uanti ty, Part N umb er and Descripti on W hen Ord ering

&um-am ro iaqurng reties eArD sReAtty

WiE

m

REDUCTION GEAR CASE ASSEMBLY

0

REDUCTION GEAR CASE ASSEMBLY FOR REXROL REX PART NUMBER 602-4865-2

O

C

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Part Number 402-2565-2 402-1605-2 402-1610-2 402-1609-2 402-1608-3 402-1612-2 402-610-2 402-608-2 402-611-2 402-1712-2 402-1579-4 402-609-2 402-607-2 402-578-4 402-1611-2

I

502-1988-80 502-1983-80 102-6016-1 102-4260-1 102-6919-1 102-2888-1 102-2889-2 102-2890-1 102-2887-1 102-6000-1 102-1999-1 102-2896-1 102-2896-3 102-2896-5 102-2895-1 102-2895-3 102-2895-5 102-2897-1 102-2897-3

Description Gear Case Transmission Case Cover Gear 72 Tooth Gear 60 Tooth Idler Gear — 40 Tooth Sliding Gear — 19 Tooth & 16 Tooth Gear — 22 Tooth Gear — 20 Tooth Gear — 19 Tooth Brake Drum Brake Anchor & Cover Brake Shaft Cover Inter. & Sliding Gear Shaft Cover Carrier — Idler Shaft Final Drive Pinion Not Used Cover Shifter Arm Cap Screw — Drilled Bearing Carrier Idler Shaft Intermediate Shaft Sliding Gear Shaft Brake Shaft Rail Shifter Spacer Spacer Shim (As Required) (.001" th.)

Shim (As Required) (.003" th.)

Shim (As Required) (.005" th.)

Shim (As Required) (.001" th.)

Shim (As Required) (.003" th.)

Shim (As Required) (.005" th.)

Shim (As Required) (.001" th.)

Shim (As Required) (.003" th.)

No. Req'd.

Item No.

1 1 1 1 1 1

36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

1 1 1 1 1 1 2 1

1 1 1 1 1 1 1 1 1 1 1 1

10 7 7 10 6 6 3 2

Part Number 102-2897-5 298-139-47 298-140-47 298-141-47 298-3052-68 298-3010-68 102-3037-5 298-3520-68 298-163-2 298-164-2 298-165-2 298-166-2 102-6375-1 298-193-2 298-135-2 298-136-2 298-3518-68 298-8513-34 298-51-47 298-54-47 298-28-2 102-6121-3 298-6503-68 102-2893-1 102-2886-1 102-2885-1 102-1422-1 102-644-1

Description Shim (As Required) (.005" th.)

Not Used Cam Operating Lever Brake Lever Actuating Brake Cam Oil Seal (Bower Brg. #55402) Oil Seal (Bower Brg. #50185) Shim (.005" th.)

"0" Ring (National #622715) Bearing Cup (Timken #592XS) Bearing Cone (Timken #593) Bearing Cup (Timken #3920) Bearing Cone (Timken #3980) Bearing Spacer Bearing Assembly (Timken #A30620) Bearing Cone (Timken #LM501349) Bearing Cup (Timken #LM501310) "0" Ring (National #622773) Snap Ring Brake Brake — Pin Bearing — 38 " Ball Not Used Hydraulic Motor 14" N.P.T. Breather Gasket Gasket Gasket — Brake Cover Washer Spring — Shifter Shaft x 1" Brt. Cap Screw w/L.W. Pipe Nipple 1/4" x 3 1/2" Pipe Coupling 1/4 Brt. Cap'Screw 1.z x 1" Brt. Cap Screw "

'

No. Req'd.

2 1 1 1 1 1

7 2 1 1 1 1

2 1 6 6 1 1 1 1 1 1 1 1 1 1 1 1

37 1 1

3 3

Al wa ys G ive Seri al Numb er of Machine

vi

Spe cify Q uanti ty, Part N umb er and Descripti on W henOrd ering

REDUCTION GEAR CASE ASSEMBLY FOR REXROL REX PART NUMBER 602-4865-2 (Cont'd.)

Part Number

71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

- - -

--

,

- - - - -

102-1781-1 102-3037-1 102-3037-3

89 •v •s, NI 03 1 N1 Hci

A C)

zw z

C)

90 91

102-6013-1

Description 1/2" x 1 1/2" H.C. H.T. Cap Screw 546 " x 1" Soc. Hd. Cup Pt. Set Screw, Nut 1/2" x 11/2" Sq. Hd. Cup Pt. Set Screw 1/2" x 3 1/2" Soc. Cap Screw 3/8 " Lock Washer 1/2" Lock Washer Not Used 5/16 " Nut Hex %" Nut Hex 1/2" Nut Hex 46 Ga. Wire (Soft Iron) x 10' Lg. Not Used 1/2" x 45° Str. El. 1/2" Pipe Plug Gasket Shim (.001" th.)

Shim (.003" th.)

Cap Screw 3/4 " x 1 14" H.T. C.W. & L.W. (Not Illustrated) Cap Screw 1/2" x 3 1/2" Soc. Head L.W. & Spacer (Not Illustrated) Rubber Pad Cap Screw H.T. 3/4" x 1 1/4" w/C.W. & L.W.

No. Req'd.

4 1 1 6 37 14 1 1 1 1 1 2 2 10 7 3 6 1 3

Alwa ys G ive Serial Numb er ofMachine

Item No.

443A-18

Always Give Serial Number of Machine

10

ALTERNATE HYDRAULIC VALVE — STEERING REX PART NO. 298-148-53 ENERGY NO. XA-1091 EFFECTIVE SERIAL NO. HR-171 HR-185 APPROX. Relief Valve Set at 800 P.S.I. NOTE: Check carefully, machine may have Gresen Valve. See page 443A-31.

Item No.

Part Number

1

102-8752-1

2 3 4 5 6 7 8 9 10 11 12 13 14

102-8752-2 102-8752-3 102-8752-4 102-8752-5 102-8752-6 102-8752-7

15 16

102-8752-13 102-8752-14

102-8752-10

102-8752-12

Description

No. Req'd.

Valve "IN" Section with Valve Stem and (21) P-74 Valve Stem Packings — Specify Port Sizes: 1/2" N.P.T. and 4-Way (*CV-3) "0" Ring 74" x 1" (*OR-0875-1) Ball Bearing (*P-21) Relief Valve Spring (*P-16) Adjustment Screw (*P-54) Valve Stem Stop (*P-13) Valve Stem Spring (*P-17) Washer S.A.E. s/i6 " (* Hex Head Cap Screw 54 6 " 18 N.C. x 54" (* Spring Clamp (*P-66) Hex Head Cap Screw '4" 16 N.C. x 13/4" (* Not Used Not Used Valve Stem — 4-Way for Double Action Hydraulic System (Not Illustrated) (*P-60) "0" Ring '4" x 1/2" (Not Illus.) (*OR-0375-0500) "0" Ring 1/2" x 1146" (Not Illus.) (*OR-0500)

*Part numbers a re Energy Mfg. Co., Inc. — Monticello, Iowa part numbers.

MiliMMMWM, REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

1 1 1 1

1 2 1

1 1 1 1

1 1

m

33 18 66 —ow19 _ 17 65 72

74

ri)

36

CD

0

44

17\

7

58

26 21

I

25

7331*"-

68

400.1 s '

v

43

41 37

70

CD a.

''..4It'll '4''Nit

r

85 ----_____t

;17

13

11

L-

32

38 39 40

................ .......-- otstst.4..

L

10 2

14

-

3

.....---",

N 28

31

71

" Cu

12 3

(1) tt.

76

w.

PROS 041[0 SAVAirV

0

CD 0

0 CD utl

1

47

20 33 34 84

55 56

•V •S •fl NICI3 INI bicl

In

22

Used Previous to HR-201

64

85

27 30

54

0

FRAME — COVERS — HOOD — MATS & SCRAPERS

•V - S •11 NI 031 NI Md

0

m

Used Pre vious to HR-201

0 z

cp

8

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

502-5835-80 298-5555-68 502-5834-80

17 18 19 20 21

z

ct.ts 0 (1)

I

Item No.

.

:2 v Asti 7 va.

m

22 23 24 25 26 27 28 29 30 31 32

102-3389-11 502-1798-81 102-6014-1 298-34-47 502-1982-80 502-5570-80

502-1798-83

298-5536-68 58124A3 102-7593-1 102-7069-1 502-5577-80 502-5577-81 298-144-47 102-2916-1 102-2917-1

FRAME — COVE RS — HOOD — MA TS & SCRAPE RS FOR REXROL 8- 12 WITH FORD 240 GAS OR 242 DIESEL POWE

Description Main Frame Rubber Channel Strip Hood — Drive Roll Pipe Plug 1/4' 1 (Not Illustrated) Pipe Plug 3/4" (Not Illustrated) Cap Screw 3/4" x 3/4" w/C.W., L.W. & Nut Steering Valve Bracket Cap Screw %" x 1" Brt. w/Washer & Nut Fuel Line Wire Rubber Mounting Pad Cap — Water Tank Cover — Ballast Tank Cap Screw 34" x 1" Frame — Engine Hood Cap Screw 3/4" x 1 1/2" (Not Illustrated) Cap Screw — Brt. '/16 " x 1" w/C.W., L.W. & Nut Ammeter Switch Jumper Wire Reducing Bushing 3/4" x Street Ell 1/4" x 90° Cap Screw 1/2" x 1" Cap Screw 1/2" x 1 1/2" w/C.W., L.W. & Nut Rubber Channel Strip 1/2" x 1/2" x 91/2" A='10-32 x 1/2" Mach. Screw R.H. w/C.W. Finger Clip Fastener Seat and Slides Seat Support — Base Cover — Engine Side (Gear Case Side) Cover — Engine Side Fastener — Panel Cover — Gear Case Side Cover Cap Screw 5,1 6 " x 3/4" w/L.W.

No. Req'd.

Item No.

Part Number

1 1 1 1 1 18 1 2 1 18 1 1 17 1 4

33 34 35 36 37 38 39

298-8001-86

42 43 44 45

298-6068-17 502-3936-80

3

46

502-3799-80

1 1

47

502-3800-80

502-4187-80 298-175-47 102-7192-1 102-7214-1

40 41

1 4 6

1 5 4

1 1 1 1 1 1 4

48 49 50 51 52 53 54 55 56 57 58 59 60 61

102-3418-1 102-3418-2 102-1970-1 102-1327-1 102-6985-1 102-1311-1 298-2014-71 502-5569-82 502-2011-80 502-3801-80

m Cn cep

Description Fitting Cap Screw 3/4" x 13/4" w/L.W. Fuel Tank Cap — Fuel Tank Clamp — Fuel Tank Bracket — Clamp, Fuel Tank Cap Screw 1/2" x 11/4" w/Nut & L.W. (Not Must.)

Cap Screw 3/4" x 11/4" Cap Screw 3/4" x 21/4" w/Nut & L.W. (Not Illustrated) Cotton Webbing 3/4" x 2" x 23" Cotton Webbing 3/4" x 2" x 27" Ignition Switch Scraper — 1 Hole (Inside) and ahead of Guide Roll Scraper — 5 Holes — Fits Cocoa Mats on ends of machine Scraper — 2 Slots — Inside and to rear of Drive. Roll Cap Screw 3/4" x 7" with Lock Nut Spring — Scraper (Counterclockwise) Spring — Scraper (Clockwise) Yoke End Pin Cotter Pin 3/4" x 1" Knob Cap Screw x 41/4" Spring Lock Nut 5,1 6 " N.C. Hood — Engine Compartment Cover — Top Cotter Pin ', 16 " x 3/4" Frame — Cocoa Mat

No. Req'd.

1 7

1

gr O

1 3 1 O

2 2 5 3 3 1

1 2 1 6 3 3 3 3 3 5 2 2 2 1 1 4 2

FRAME — COVERS — HOOD — MATS & SCRAPERS FOR REXROL 8-12 WITH FORD 240 GAS OR 242 DIESEL POWER

Used Previous to HR-201

Item No. 62 63 64

•S •11NI 031N1 Hel

65

0

z

66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87

Part Number 102-2919-1 298-123-47 _ 102-4375-1 *SW440343 - *SW-G444553 *SW-G442681 ....*SW-G441207 298-6067-17 298-2069-56 298-5044-92 102-756-1 298-2065-56 298-2511-68 298-2066-56 298-2067-56 502-2423-80 102-7020-1 402-1540-1 502-2507-80 102-6973-1 402-1540-2 102-1282-1 102-2892-1 102-2933-1 102-7103-1 102-7598-1 58124A3

Description Cocoa Mat Hog Ring Carriage Bolt 1/2" x 8" Instrument Cluster Assembly Ammeter Gauge Oil Pressure Gauge Water Temperature Gauge Hour Meter Gauge Fuel Gauge .

Starter Switch Vacuum Gauge (Gresen 83025) Throttle Cable Choke Cable Fuel Gauge Sending Unit Gasket — Fuel Gauge Sending Unit Oil Pressure Sending Unit Water Temperature Sending Unit Instrument Panel Cover Hook Bolt w/Nut REX Name Plate Spacer — Fuel Tank Nut, Special — Starter Switch REX Name Plate (Not Illust.)

Plate — Serial & Model No. (Not Illust.)

Plate — "Mobil Fluid 300" (Not Illust.)

Plate — "Hydrostatic" (Not Illust.)

Plate — "Hydro-Oil" (Not Illust.)

Drain Hole Cover 5" x 6 134 5 " Cut Washer 'A" Fastener Cut Washer 34" * Stewart Warner part numbers.

No. Req'd.

2 14 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 2 1 1 1 1 1 1 1 4 4 4

ta .?

ar

cD 0 a,

in

z

cD

Always Give Serial Number of Machine

443A-22

HYDRAULIC MOTOR SUNDSTRAND FIXED DISPLACEMENT MOD. 22-3023 REX PART NO. 102-6121-3 FOR REXROL 8-12

Item No.

Part Number

1 2 3

102-4365-15 102-4365-1 102-4365-18

Description Manifold Assembly Seal Kit Relief Valve Assembly

No. Req'd.

1 1 1

REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

R

EX

17

82 EO

65

s - nNICI3

INI tid

Specif y Q uanti ty , Part N umb er and Descripti on W henO rd eri ng

43

33

67 34 L 71

38 39 40

32N 28

13 11 12

31 87 86 85 84

milt 54

66

6

58

76 29

m

X 0

47

22

2

Eff. Sera No. IR201 0

64

1 20 33 55 56 54 il 1 67\ ii. \ i6

i

27 30 FRAME — COVERS — HOOD — MATS & SCRAPERS FOR REXROL WITH FORD 240 GAS OR 242 DIESEL POWER

•Y •S •11NI a3 INI 8c1

FRAME — COVERS — HOOD — MATS & SCRAPERS FOR REXROL WITH FORD 24'0 GAS OR 242 DIESEL POWER

in

0

cb

502-1798-81 102-6014-1 298-34-47 502-1982-80 502-5570-80 •

502-1798-83

a 0

-

0

kt/

m

298-5556-68 58124A3 102-7593-1 102-7069-1 502-5577-80 502-5577-81 298-144-47 102-2916-1 102-2917-1

6 1 5 4 1 1 1 1 5 1 1 4

102-1282-1 298-2065-56

5 36 37 38 39

502-4187-80 298-175-47 102-7192-1 102-7214-1

40 41 42 43 44 45

298-6068-17 5C2-3936-80

46

502-3799-80

47

502-3800-80

48 49 50 51 52 53 54 55 56 57 58 59 60

102-3418-1 102-3418-2 102-1970-1 102-1327-1 102-6985-1 102-1311-1 298-2014-71 402-1540-2 502-2011-80

Description Plate — Serial and Model No. Fuel Gauge Sending Unit Stewart Warner Corp. #390-CM Fuel Tank Cap — Fuel Tank Clamp — Fuel Tank Bracket — Clamp, Fuel Tank Cap Screw 1/2" x 11/4" w/Nut & L.W. (Not Illustrated) Cap Screw %" x 11/4" Cap Screw 34" x 21/4" w/Nut & L.W. (Not Illustrated) Cotton Webbing 1/8 " x 2" x 23" Cotton Webbing '4" x 2" x 27" Ignition Switch Scraper — 1 Hole (Inside) and ahead of Guide Roll Scraper — 5 Holes — Fits Cocoa Mats on ends of machine Scraper — 2 Slots — Inside and to rear of Drive Roll Cap Screw %" x 7" with Lock Nut Spring — Scraper (Counterclockwise) Spring — Scraper (Clockwise) Yoke End Pin Cotter Pin 1/8 " x 1" Knob Cap Screw 1/2" x 4" Spring Lock Nut 1/2 " N.C. "REX" Name Plate Cover — Top Cotter Pin i i ," x '4"

No. Req'd.

7r

'IP

22 23 24 25 26 27 28 29 30 31 32

3 1 1 1 4

33 34

-

qpmononono0ix)CVCV CV

C5*

1 1 1 1 1 18 1 2 1 4 1 1 17 1 4

Part Number

CA

17 18 19 20 21

102-3743-1

Main Frame Rubber Channel Strip Hood — Drive Roll Pipe Plug 1/4" (Not Illustrated) Pipe Plug 3/4" (Not Illustrated) Cap Screw 3/8 " x3/4" w/C.W.,L.W. & Nut Steering Valve Bracket — Ford 242 Diesel Cap Screw 1/2" x 1" Brt . w/Washer & Nut Fuel Line Wire Rubber Mounting Pad Cap — Water Tank Cover — Ballast Tank Cap Screw %" x 1" Frame — Engine Hood Cap Screw 34" x 11/2" (Not Illustrated) Cap Screw — Brt. 54 6 " x 1" w/C.W., L.W. & Nut Ammeter Switch Jumper Wire Reducing Bushing 1/4 " x 1/8 " Street Ell 1/4" x 90° Cap Screw 1/2 " x 1" Cap Screw 1/2" x 11/2" w/C.W., L.W. & Nut Rubber Channel Strip 31 6 " x 3 8 " x 9 1/2" #10-32 x 1/2" Mach. Screw R.H. w/C.W. Finger Clip Fastener .

Seat and Slides Seat Support — Base Cover — Engine Side (Gear Case Side) Cover — Engine Side Fastener — Panel Cover — Gear Case Side Cover Cap Screw 51 6 " x N" w/L.W.

Item No.

,4

I.

its

502-5835-80 298-5555-68 502-5834-80

No. Reqrd.

to0101,4

Oa

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Description

eqCq

tb

ti

Part Number

,4,4co

0

Item No.

Eff. Ser. No. IIR201

Alwa ys G ive Serial Number of Machine

0

m

FRAME — COVERS — HOOD — MATS & SCRAPERS FOR REXROL WITH FORD 240 GAS OR 242 DIESEL POWER

X ticb a

0 C

z

Item No.

Part Number

61 62 63 64

502-3801-80 102-2919-1 298-123-47

Description

502-6019-80

—

z

65 • 502-6087-80

Z 13,

z

8 * z

58124A3 102-7598-1 102-756-1 - - - - 298-2511-68 298-2066-56 298-2067-56 502-6022-80 .

cp

0 ■CI

'Y 'S ,

NI 03 1Nl tr1d

'

m

X 0

75 76 77 78 79 80 81 82

83 84 85 86 87 88

102-7103-1 402-1540-1 502-2507-80 102-6973-1 102-2933-1 102-3771-1 102-2892-1

502-2829-80 203027 502-4526-80 102-8369-4 102-8369-5 102-8414-1

Ground Wire — Tank (not Illus.)

Wire — Instrument Cluster (not Illus.)

Cover — Water Tank Tape — 26" long Tape — 36" long Cap Screw %." x 1 1/4" w/L.W. "WARNING" Plate

No. Req'd.

2 2 14 2

1 4 4 1 1 4 1 1 1 1 1 3 2 1 1 1 1

1 1 1 2 2 18 1

Always Gi ve Serial Number of Machine

66 67 68 69 70 71 72 73 74

Frame — Cocoa Mat Cocoa Mat Hog Ring Carriage Bolt 1/2" x 8" Hood — Engine Compartment (As Illus.)

Eff: Previous to HR-201 (See Sep. Illus.)

Hood — Engine Compartment (Similar to Illus.) Eff. HR-201 (See Sep. Illus.)

Fastener Cut Washer 1/2" Drain Hole Cover 5" x 6' 3/16" Choke Cable Cut Washer 'V Gasket — Fuel Gauge Sending Unit Oil Pressure Sending Unit Water Temperature Sending Unit Instrument Console Eff: Previous to HR-201 (See Sep. Illus.)

Plate — "Hydro-Oil" (Not Illus.)

REX Name Plate Spacer — Fuel Tank Nut, Special — Starter Switch Plate — "Hydrostatic" (Not Illus.)

Operating Instructions Plate Plate — "Mobil Fluid 300" (Not Illus.)

Eff. Ser. No. HR201

443A-26

Always Give Serial Number of Machine

14

10

11

13 6 12

P

I

-

15

yir

00.4

_

• . I Pra -

w.■1111111161Pr

"ir

i lalstemws la1 4 -ip7p,:=.7777 ir I/ WrO 2■1:=Z;ZA iffl ZZZ:=1.112.4-0 .11•1•111.111111111

■ •■■■■

IMbia.1111,11110111011.110

sort;

6 16 17

I el/

• II,

11110-1,.

ir -

A

• WI

■ . VP '•

411,101 %.11••

A

HYDRAULIC STEERING PUMP WEBSTER ELECTRIC PART NO. 077YC000 (19-2RA) REX PART NO. 102-7342-1 Item

No. 1 2 3 4

5 6 7 8 9 10 11 12 13 14 15 16 17

Part Number 102-7342-11 102-7342-12 102-7342-13 102-7342-14 102-7342-15 102-7342-16 102-7342-17 102-7342-18 102-7342-19 102-7342-20 102-7342-21

Description Cover (*150-40913) Gear (Impeller) (* Bearing Shaft (* Repair Kit — Consisting of all parts for normal repair (*152-39072-1) Driven Shaft (*152-39060-1) "0" Ring (*29771-135) Adapter (*151-26158-4) Retainer Plate (*150-32219-2) Drive Gear (* Key (*151-17665) Set Screw (*29543-1) Shaft Seal (* Retainer Screw (*29569-21) Housing (*150-40917) Dowell Pin (*151-32235-5) Steering Pump Gasket (*102-7635-1) Steering Pump Gasket (*102-7636-1)

No. Req'd.

1 2 4

1 1 1 1 1 1 1 1 1 3 1 2 1 1

*Webster Electric part numbers.

REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

att, S EX

Always Give Serial Number of Machine

D R IVE ROLL ASSE MBLY

443A-27

EX

REX CHAINBELT

Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S A.

•V •6,1NI C13 1N I 8c1

xm 0

I

z0

DRIVE ROLL ASSEMBLY FOR REXROL 8 -12 Item No.

Part Number

1

502-5499-80 102-2909-1 298-39-2 298-194-2 102-4263-1 402-1569-2 298-3054-68 - - - - 298-10022-2 298-10023-2 298-10024-2 102-6027-1

2 3 4

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

402-51-2 102-1930-1 102-1931-1 298-3517-68 402-2543-2 102-1916-1 298-2030-17 502-5497-80 298-3079-68 102-4258-1 102-4258-2 102-4258-3

102-1915-1 298-3518-68

Description Drive Roll Drive Shaft Bearing Cup Bearing Cone Sleeve Labyrinth Oil Seal Cap Screw V x Shim (.005) (As Required) Shim (.007) (As Required) Shim (.020) (As Required) Axle Cap Cap Screw 7/8 " x 7" w/L.W. Cover Pipe Plug 1/8 " Countersunk Cover Gasket "0" Ring Bull Gear Stud Lock Nut 1" U.N.C. Final Drive Housing Oil Seal Pipe Plug 1/4" Countersunk Gasket Gasket Gasket Pipe Plug %" Brass Cap Screw 3/8 " x 1" w/L.W. & Nut Set Screw 3/8 " x 1 1/2" Sq. Hd. Cup Pt. Drilled Cap Screw with 1/2" L.W. & Lock Wire "0" Ring Standard Stud 3/8 " x 11/2" w/Brass Nut

No. Req'd.

1 1 2 2 1 1 1 2 10 10 20 2 4 1 1 1 1 1 1 6 6 1 1 3 2 1 1 2 5 1 6 1 2

N

00

Always Give Serial Number of Machine

GU IDE ROL L - YOKE AND KING PIN

443A-29

LEX

REX CHAINBELT INC.

Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S.A.

GUIDE ROLL - YOKE AND KING PIN REXROL 8-12

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

P art Nu mber 502-5564-80 298-162-2 298-161-2 102-2873-1 102-2910-1 402-1571-2 102-1972-1 298-10022-2 298-10023-2 -I‘ 298-10024-2 102-1915-1

- - - - 402-51-2 102-1322-1

502-5565-80 1102-1973-3 102-1973-5 102-1973-10 298-10000-2 298-10001-2 298-10002-2 {

21

Description Guide Roll Bearing Cup Bearing Cone Shaft Center Labyrinth Outboard Labyrinth Axle Cap , Shim (.005") As Required Shim (.007 " ) As Required Shim (.020") As Required Drilled Cap Screw Lock Washer 1/2" Wire #16 Ga. (Soft Iron) x 7" lg.

Countersunk Pipe Plug 'V Cover Gasket Standard Stud %" x 11/2" Pipe Plug 3/4" Brass Hex Nut 34" Brass w/L.W. Yoke Cap Screw 1" Dia. x 8" lg.

Shim (.003" thick) As Required Shim (.005" thick) As Required Shim (.010" thick) As Required Shim (.005" thick) As Required Shim (.007" thick) As Required Shim (.020" thick) As Required

No. Req'd.

Item No.

2 4 4 1 1 2 2 *8 *8 *8 6 6 2 2 2 2 4 2 4 1 2 *10 *4 *6 *4 *4 *6

22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Part Number - - - - 402-1573-2 102-2854-1 2,98-6012-34 102-2856-1 298-151-2 298-150-2 402-1572-2 - - - - -

402-1556-2 298-145-2 298-146-2 298-27-2 298-39-2 102-1913-1 _ #1610 -102-1915-1 - - - - -

No. Req'd.

Description Hex Nut 1" Lock Washer 1" King Pin Cross Pin Roll Pin Spacer - King Pin Bearing Cup Bearing Cone Bearing Retainer Cap Screw %" x I" Brt. Lock Washer % " Pipe Plug '4" (Countersunk) Head - King Pin Bearing Cone Bearing Cup Bearing Cone Bearing Cup Cap - King Pin Grease Fitting Drilled Cap Screw Lock Washer 1/2" Wire #16 Ga. x 7" lg.

Cap Screw 3/4" x 2 1/2" (H.T.) Lock Washer 3/4" Hex Nut 3/4" * Quantities are approximate.

'

2 2 1 1 1 2 2 2 2 12 12 2 1 1 1 1 1 1 1 3 3 1 6 6 6

Always Give Serial Number of Machine

443A-31

11

12

22

10 4 /

19

701D 21

23

HYDRAULIC VALVE — STEERING GRESEN MFG. PART NO SP4 REX PART NO. 298-102-53 Eff. Ser. No. HR101 - HR170 and HR186, up.

Item No.

P art Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

102-8503-1 102-8503-2 102-8503-3 102-8503-4 102-8503-5 102-8503-6 102-8503-7 102-8503-8 102-8503-9 102-8503-10 102-8503-11 102-8503-12 102-8503-9 102-8503-14 102-6208-10 - - - - 102-8503-16 102-8503-17 102-8503-18 102-8503-19 102-8503-20 102-8503-21 102-8503-22

Description Rubber Bonnet (*967) Snap Ring, Stop Disc (*914) Stop Disc (*912) Bolt — Spring Assembly (*510) Lock Washer (*2529) Collar (*911A) Spring (*913) Stop Washer (*1202) Spool Seal (*932) Valve Housing (*2701) Plug (*947) Spool (*2891) Spool Seal (*932) Cotter Pin (*929) Handle Link (*928) Not Used — See Controls Assembly Check Ball Plug (*2783) "0" Ring (*1141) Check Ball (*2781) "0" Ring (*2706) Seat (Valve) (*2787) Gasket (*923) Body (*983)

No. Req'd.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1

*Gresen Mfg. Co.,405 - 35th Ave., N.E.— Minneapolis, Minn. 55418 part numbers.

REX

REX CHAINBELT

Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S.A.

Always Give Serial Number of Machine

443A-32

HYDRAULIC STEERING RAM REXROL 8-12 STEEL WHEEL ROLLER REX PART NUMBER 102-3400-1 CROSS MFG. CO . PART NUMBER 230135WSF Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

102-3400-10 102-3400-11 102-3400-12 102-3400-13 102-3400-14 102-3400-15 102-3400-16 102-3400-17 102-3400-18 102-3400-19 102-3400-20 102-3400-21 102-3400-22 102-3400-23 102-3400-24 102-3400-25 298-5050-92

Description

No. Req'd.

Tube Assembly (*1C3434) Nut (*1A0146) Seal — "T" Ring (*1A0315) Piston (*1C0005) "0" Ring (*1A0051) Rod (*1C3435) "0" Ring (*1A0003) Head (*1C1532) ' Wave Spring (*1A0256) Washer (*1A0248) Seal ("V" Set) (*1A0059) Retaining Ring — Wire (*1A0308) Headcap (*1C1528) Seal (Wiper - Lip Type) (*1A0019) Cap Screw (*1A0300) Seal Kit (Consists of Items 3, 5, 7 & 11) Drag Link

1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 1 2

*Cross Mfg. Co„ Inc., Lewis, Kansas Part Numbers.

REX CHAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering

milEX

Always Give Serial Number of Machine

443A-33

41■111111mmir

' vim

OP TIONALGRA VITY FE ED S PR IN K LE RS YS TEM

C

REX

REX CHAINBELT INC.

Spe ci f y Q s • uant ity, Part Number and Description Quantity, - • When Ordering•

PRINTED IN U.S.A.

•V •S , 1 NI ,13 1 N1

0

in

in

z

0

OPTIONAL GRAVITY FEED SPRINKLER SYSTEM FOR REXROL 8-10

I-.

0 Item No .

.13 0,

Ou

sts

6*

1 2 3 4 5 6 7 8 9 10 11 12

Part Number 602-1367 502-1799-83 502-1799-82 102-8224-2 102-8224-3 102-8224-4 298-1008-4 102-3536-1 102-1510-1 102-8135-1 298-46-98 298-151-53

6

tp 0

a

.

in

Description Sprinkler Bar Assem. — Items 29, 30, 31 & 32 assembled Wire Assembly Wire Assembly Hose %" x 38" — Goodyear Utility Hose 58" x 65" Hose %" x 124" U-Bolt Assy. w/Nut Bracket — Solenoid Mounting Pipe Clamp 1/2" Identification Plate Valve — Solenoid Water Sump Strainer — 60 Mesh Monel — 10 G.P.M. Flow Rate — 1 NPTF Thread Connector — C. 0. Jellif Mfg. Corp. 4,J10-1707 60- 1 NPTF Grommet 1" I.D. — 13,,:4" Overall Dia. x 7/,," thick — Goshen =4434 Toggle Switch — Cutler-Hammer z-, 8815 K6 —

13

298-5524-68

14

298-6114-17

No. Req'd.

2

2 4

1

1 1 4

1 1 1 2

1 1 2

Item No. 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Part Number X7820 102-8387-1

298-5000-34

102-6011-1

Description Hose Clamp Shim Nipple %" x 11/2" T.O.E. Galv.

Street Elbow %" x 90 ° Galv.

Reducing Bushing 1/2" x %" Galv.

Nipple 3/8 " x 3" T.B.E. Galv.

Reducing Elbow 1" x %" — 90° Tee 3/8 " Galv.

Close Nipple 3/8 " Galv.

Elbow %" — 90 ° Galv.

Not Used Drive Rivet (not Illus.)

Cap Screw %," x 3 4 " w,/L.W. & Nut Cap Screw 1/4 " x 3 4 " Sprinkler Pipe 3;8 " Pipe Cap 3/8 " Galv.

Pipe Tee 3 8 " Galv.

Pipe Nipple 3 8 " x 11/2" T.O.E.

No. Req'd.

6 8 2 2 4 1 1 1 2 1 2 1 4 2 2 1 1

.Alwa ys G ive Seri al Number of Machine

in

Always Give Serial Number of Machine

443A-35

V NI

csi

OPT IONA LPU M PFEE D F OGS PR AY SYS TE M

.111MEMI

'EX Specify Quantity, Part Number and Description When

REX CHAIN BELT INC

Ordering

PRINTED IN U 5 4.

ify Q uanti ty,Part N umb er and Descri pti on W hen Ord ering

Part Number

Item No. 1

602-2330

2 3

502-1799-81 102-6440-1

4 5 6 7

102-8224-2 102-8224-4 102-8224-5 102-1510-1 102-8335-1 298-5000-34 298-8121-86

89 1 10

298-46-98 '

11

298-6114-17

12

298-1014-4

Description Spray Bar Assem. Items 27, 28, 29, 30 & 31 assembled Wire Assembly Water Pump — "Jabsco" (See 443-35 Sep. Illus.)

Hose 3/8 " I.D. x 38" Goodyear Utility Hose 3/8 " I.D. x 124" Goodyear Utility Hose %" I.D. x 74" Goodyear Utility Pipe Clamp 1/2 " Ident. Plate — Sprinkler Drive Rivet Hose Coupling — Female — Brass — Serrated Shank — Female Swivel w/washer & %" Garden Hose Thread — Gates Rubber Co. #7203-55 Solenoid Valve — '/2" N.P.T. — 12 Volt D.C. — Automatic Switch Co. #ASCO 8210 B 94 Toggle Switch — Cutler-Hammer #8815 K-6 U-Bolt w/Nut

No. Req'd.

1 1 1 .1 3 1 6

1

Item No.

Part Number

13

298-147-53

14

298-26038-17

15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

X7820

- - 298-9-17 298-9048-86

- - - - 102-8224-4 102-3071-1 - - - -

Description Water Filter — Series 20, 10 G.P.M. Flow Rate 11 1/ Female Thread Connector — Michigan Dynamic Inc. #SU27 SF 16 Terminal Eye 1 332 " I.D. — #14-10 Gauge — Whitaker #1827 Hose Clamp i Nipple 3/8 " x 112" T.O.E. Galv.

Close Nipple 38" Galv.

Street Elbow 38" x 90° Galv.

Tee V' Galv.

Button Plug Reducing Bushing 1 2 " Hose Clamp — Steel Not Used Drive Screw :--.10 x ' s " lype "U" ' Reducing Eli 3 8' " x 1" — 90' — Galv.

Hose 's" I.D. x 124" Goodyear Utility Spray Bar 3 ," I Pipe Cap 3 ," Galv.

Pipe Tee 3 " x 3 ," x 3 Galv.

Spray Nozzle — Flat Atomizing Nozzle— Spray Systems Co. ='. TT 9501 Pipe Nipple 3 ," x l'," T.O.E. Galv. , "

102-6438-1

No Re q'd .

1 1 5 3 2 .1 1 1 2 1 1 1 1 2 2 1 8 1

A lwa ys G i ve Seri al Numb er of Machine

OPTIONAL PUMP FEED FOG SPRAY SYSTEM FOR RFAROL 8-10

443A-37

EX

Always Give Serial Number of Machine

REX CHAINBELT INC.

Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S.A.

NI 03 1 NI ble1

'V 's ,

PI

0I w

OPTIONAL 5M CENTRIFUGAL WATER PUMP

Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Part Number 62259A X7619 61968 61964 61959 61963 61977AA2 61960A

201690 402-545-2 62265 402-544-2 102-2451-1 *61967-5 *6196740 - *61967-15 *,61967-30 *61967-.40 C13422 61966

No. Req'd.

Description Standard Stud '46 " x it w/2 Hex Nuts Inlet Valve "0" Ring 2 14" I.D. Flap Valve Washer Flap Valve Rubber Weight for Flap Valve Keeper for Flap Valve Pump Body Lifting Plug Pipe Tee l'/2" x 34" x 11/2" Pipe Nipple 1 1/2" x 2" Square Head Cup Point Set Screw 1/4" x 1" with Jam Nut Peeler Cover Plate Gasket Impeller Wearing Plate Standard Stud '4 6 " x 1 1/4 " w/6 Hex Nuts Socket Head Cup Point Set Screw 1/4 " x 343 " Shim (.005" Thick) Shim (.010" Thick) Shim (.015" Thick) Shim (.030" Thick) Shim (.040" Thick) Rotary Seal Assembly Wearing Sleeve

2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 6 1 2 1 1 2 1 1 1

Item No.

Part Number

23

X203252

24 25

62264

26 27 28 29 30 31 32 33 34 35 36 37 38 39

----X6845 502-2036-80 A61745 61979

61809 A84287

* Parts included in C13422 Rotary Seal Assembly.

Description Briggs & Stratton Model "81331" Engine (Type #94352) with Special Crankshaft Extension (Per C.B.Co. Dwg. 203061) Fuel Tank Offset toward Blower Extension — Cylinder Aluminum Alloy with Sleeve Serial Number & License Plate Special Crankshaft for Briggs & Stratton Model "81331" Engine with Extension (Per C.B.Co. Dwg. 203061) Pipe Plug 1/4" Pipe Nipple 1/8 " x 31/2" T.B.E. Pipe Elbow 14" x 1/4 " x 90° Compression Grease Cup Bracket Strainer Copper Washer Flat Head Brass Machine Screw 1/4 " x 3/8 " Lock Washer & Cut Washer '4 6 " Round Head Machine Screw #10-24 x 1/2" with Hex Nut Round Head Machine Screw #8-32 x '/8 " Adapter Ring Handle Cap Screw '4 6 " x 1/2" with Copper Cut Washer

No. Req'd .

1 1 1 1 1 1 1 1 1 1 3 6 1 2 1 1 2

Always G ive Serial Numb er of Machine

A

Always Give Serial Number of Machine

443A-39

WATER PUMP JABSCO — "MINI-PUPPY" #8860 12 VOLT D.C REX PART NO. 102-6440-1 .

Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12

102-6440-11 102-6440-12 102-6440-13 102-6440-14 102-6440-15 102-6440-16 102-6440-17 102-6440-18 102-6440-19 102-6440-20 102-6440-21 102-6440-22

Description Screw (*SP1002-09) End Cover — Mod. 8860 (*8865) Gasket (*7828) Impeller (*1414-37) Screw — Cam (*SP1002-01) Cam (*8089) Seal (*SP3000-10) Body (*7824) Slinger (*6342) Screw (Body to Motor) (*SP8019-02) Motor — Mod. 8860 (*SP8012-02) Service Kit — Consists of Impeller, Seal, Gasket and 31 End Cover Screws (*8860-SK92)

No. Req'd.

3 1 1 1 1 1 1 1 1 2 1 1

*Part numbers ar e Jabsco — Costa Mesa, California part numbers.

Fatt,

irInEA.

REX CHAIN BELT INC

Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S.A.

Always Give Serial Number of Machine

443A-40

9 10

HYDRAULIC TANK — REX ASSEM. NO. 602-4857-1 FILTER — REX ASSEM. NO. 298-57-53 Item No.

Part Number

1 2 3 4 5 6 7 8 9 10

602-2381-1 298-3514-68 502-1684-80

298-57-53 298-3525-68 298-6505-68

11

298-2069-56

Hydraulic Tank "0" Ring Cover with Filler Pipe Pipe Cap 3/4" Cap Screw 34" x 1" w/L.W. Filter for Filler Pipe Pipe Plug 3/4" Oil Filter — Gresen #FA-201-NR "0" Ring Filter Element *10 Micron - Gresen Mfg. Co. Vacuum Gauge

12 13 14 15

298-57-47 X7953

MISC. HYD. FITTINGS (Not Illust.)

1" x 3/4" Reducing Ell 1.1A" x 1" Reducing ElI Tube Clip 72" Clamp

16

298-13014-86

Oil Level Gauge

298-41-53

No. Req d.

Description

1 1 1 1 6 1 2 1 1 1 1

l

1 1 3 2 1

REX CMAINBELT INC. PRINTED IN U.S.A.

Specify Quantity, Part Number and Description When Ordering .

R EX

Always Give Serial Number of Machine

443A-41

LiGrNT

7

ACCESS TARTER SCHEMATIC

REAR LI rs - -

RAft

OF cu) ITC 11

••■■•••

(

I

11 12 1

II I

I

10

3

I

_J

9 4 7

LIGHTING SYSTEM DIAGRAM OPTIONAL EQUIPMENT Item No.

Part Number

1

298-12014-17

2 3

298-12015-17 298-59-47 298-6019-17 502-173-80 102-6117-1 502-104-80 298-26029-17 298-59-47

4 5 6 7 8 9 10 11 12

R

298-5226-68 X8013

Description Combination Flood & Tail Light — 12V (R.H.) Lamp Assembly — 12V (L.H.) Tube Clamp Three-Way Switch 30 Amp. Fuse Assembly Wire Set Wire Assembly Terminal — Bullet Nose Tube Clamp /t8 x 'A" Sheet Metal Screw Grommet Clip 1/4" Loom 6' lg.

No. Req'd.

2 2 10 1 1 1 1 4 12 2 2 8 1

REX CHAINBELT INC.

EX Specify Quantity, Part Number and Description When Ordering

PRINTED IN U.S.A.

443-

Always Give Serial Number of Machine

43

CONTROLS ASSEMBLY - FORWARD - REVERSE - STEERING BRAKE - SHIFTER

EFF. previous to HR 186

/12 12 13

J 32 '

44

12 43

5

29 30 31

23 Nr;

22

45

18 13

11

10 21

— - ---,1 -11 3

4 1 I ee 15 1

10 20 23 10 21 24 16

40

8

/

13

11 7 21 25

8

21

10 20 23

I

26 35 39

L

REX CHAINBELT INC.

EX Specify Quantity, Part Number and Description When Ordering

PRINTED.U.S.A.

'V 'S, NI 031 NI dd

min

z :4

1

z CONTROLS ASSEMBLY — FORWARD — REVERSE — STEERING — BRAKE — SHIFTER FOR REXROL 8 -12

, Cn cb

a,

ti

C

a. co

8

0

cp

t. kg

rn

Item No.

Part Number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

502-4188-80 502-1994-80 502-1995-80 502-1959-80 502-2508-80 502-1957-80 502-1958-80 102-1950-1 102-1949-1 298-153-2 402-1596-2 298-48-47

28

102-6009-1 102-1334-1 102-1335-1 102-1326-1 298-58-47 298-8007-4

- - - - -

.

1298-123-2

Description Deck Plate — Controls Brake Shaft Throttle Shaft Brake Lever Steering Lever Lever — Travel Control Bracket — Clutch — Travel Control Pressure Plate Bearing Spacer Pillow Block 1" Brake Pedal Knob Woodruff Key #808 ( 1 " x 1") Rod — Shift Control Pawl Clutch Disc Spring Ball Plunger Shoulder Bolt Cap Screw 3/4" x 13/4" Cap Screw 3/4" x 1" Brt. Cap Screw 3/4" x 1 1/2 " Brt. Hex Nut 34" Lock Washer 3/4" Cup Point Set Screw 34" x %" Cap Screw 3/4" - 16 U.N.F. x 2" Jam Nut 3/4" - 16 U.N.F. Rod End 3/4" Nut 34" U.N.F.

No. Req'd.

Item No.

1 1 1 2 1 2 1 1 3 5 2 4 4 1 2 1 3 2 1 6 16 4 16 14 4 3 3 2 2

29 30 31 32 33 34 35 36 37 38 39

Part Number

Description

298-2012-71 502-1985-80 102-6079-2 102-6080-4 502-3810-80 502-2228-81 102-6116-1 102-1846-2 IX7887

40 41 42 43 44 45 46 47 48 49 50

102-3389-1 298-239-47 298-146-47 298-240-47 102-3334-1 102-1891-1 298-5108-92 102-7079-1

51

- - - - -

52

- -

53

-

Cap Screw 34" x 21/4" w/Nut & L.W. Nut — Cone Lock Cut Washer 34" Lever — Gear Shift Rod — Brake Link Throttle Link Rod Forward — Reverse Lever Forward — Reverse Link Lever (Hydraulic Pump) Spacer (Hydraulic Pump) Ball Joint %" Nut 3/8 " U.N.F. Steering Valve Mounting Bracket Spoon Latch Cable Clamp Tube Clamp Cable — Decellerator Brake Spring Throttle Cable Cable Pivot #10-24 x 3/," Machine Screw Cap Screw 3/8 " x 4 1/2" w/Nut (Not Illust.)

Cap Screw 34" x 2 1/2" Brt. w/Nut & L.W. (Not Illustrated) Set Screw Sq. Hd. 1/4" x 2" w/Nut & L.W. (Not Illustrated) Cap Screw 3/4" x 2" w/Jam Nut (Not Illustrated) #10-24 x 1" Machine Screw (Not Illust.)

No. Req'd.

2 1 8 1 1 1 1 1 1 2 5 5 1 1 3 1 1 2 1 1 4 1 3 4 3 1

111

•

s