Issued: 20 Mar 2014 Figure 3-22. • Diagnostic Screen - Driver Controller Tab INP pin 11 – The input voltage from the man-on platform sensor. “digital O” indicates the digital status of the input 3-334c:T5df,Section 3. Systems Overview Model 102XM Maintenance Manual TruckCom Other Menu Functions Save to File The truck parameters can be saved in the PC for downloading at a later date. Select < File | Save to file | Parameters >. All parameters in the nodes that are connected to the CAN-bus will be scanned in and saved in a file. If only the hour meters are needed, select < File | Save to file | Hour meters >. Help - About the TruckCom Application To see program information, select < Help | About TruckCom... > or use the tool button [Information] Exit To exit the program, select < File | Exit > or use the tool button [Exit]. Download from File A set of parameters can be downloaded from the PC to the truck. Select < File | Load from file | Parameters >. The parameters in the file will be copied to the nodes connected to the bus. If only the hour meter settings are needed, select < File | Load from file | Hour meters >. Reset CAN Adapter If problems should occur when resetting the CAN adapter connected to the PC, this can normally be done manually by making sure that the adapter is supplied with voltage, and then selecting < Nodes | Reset CPC-PP >. Delete Error Code Log To delete the truck’s error code log, select < Tools | Erase error log >. Reset Hour Meter To reset the truck’s hour meter to 0, select < Tools | Reset hour meters >. Read Error Code Log To show the truck’s error code log, select < Tools | Read error log >. 3-34 Publication: 1010183, Issued: 20 Mar 20144d:T6ad,Model 102XM Maintenance Manual Section 3. Systems Overview FlashWare FlashWare Installing FlashWare on PC NOTE: FlashWare is used on trucks with Vehicle Managers P/N 1067833-004 and above. If you are a customer service technician, obtain FlashWare from your Raymond Sales and Service Center. Overview If you a