Raymond Hand Pallet Trucks LCR55 and LCS55 Versions Owner’s Operating Instructions and Replacement P

Models LCR55 and LCS55 Versions Hand Pallet Trucks

Owner’s, Operating Instructions, and Replacement Parts Manual Owner’s, Operating, and Parts Manual

Models LCR55 and LCS55 - Hand Pallet Trucks

©2013

To locate your Raymond Sales and Service Center, go to www.raymondcorp.com

If you need assistance with your lift truck, contact your local authorized Raymond Sales and Service Center.

To order additional copies of this manual, part number 1180453A, contact your local authorized Raymond Sales and Service Center

This publication, 1180453A, applies to the Raymond Hand Pallet Trucks, Models LCR55 and LCS55 versions, and to all subsequent releases of this product until otherwise indicated in new editions.

Changes occur periodically to the information in this publication.

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 12 Daily Service/Safety Checks . . . . . . . . . . . . . 13

Delivery Inspection . . . . . . . . . . . . . . . . . . . . . .1

Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Safe Use of This Hand Pallet Lift Truck is Your Responsibility . . . . . . . . . . . . . . . . . . . . . 2

Models LCR55/LCS55 - Hand Pallet Truck

Chassis Diagram, Model LCR55 . . . . . . . . . . . . . 28

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Push Bar Linkage Adjustment. . . . . . . . . . . . . 9 LCR55 Model . . . . . . . . . . . . . . . . . . . . . . . . . 9 LCS55 Model . . . . . . . . . . . . . . . . . . . . . . . . . 9 Hydraulic System . . . . . . . . . . . . . . . . . . . . . 10

i

Alphabetical Index . . . . . . . . . . . . . . . . . . . . . 41

APPENDIX B: Numerical Parts Index. . . . . . . . 39

APPENDIX A: Alphabetical Parts Index . . . . . . 35

Chassis Diagram, Model LCS55 . . . . . . . . . . . . . 32

Complete Hydraulic Assembly (PL-30278BN) . . . 22

Hardware Parts List . . . . . . . . . . . . . . . . . . . . 20

Recommended Spare Parts List . . . . . . . . . . . 19

Selected OSHA Regulations for Lift Trucks. . . 17

Hand Pallet Truck Warranty . . . . . . . . . . . . . . 16

Recycling Your Old Raymond Parts . . . . . . . . 15

Warranty Claim Procedure . . . . . . . . . . . . . . . 14

Parking the Hand Pallet Lift Truck . . . . . . . . . .8

Handling The Load . . . . . . . . . . . . . . . . . . . . . .7

Operating Instructions . . . . . . . . . . . . . . . . . . .6

Hand Pallet Lift Truck Rating . . . . . . . . . . . . . .5

Lifting the Hand Pallet Lift Truck . . . . . . . . . . .5

Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Safety Equipment . . . . . . . . . . . . . . . . . . . . . . .2

Safety Regulations for Maintenance Work . . . 11

Models Covered. . . . . . . . . . . . . . . . . . . . . . . . .1

Modifications and Additions . . . . . . . . . . . . . . 14

Adding Oil (If Required) . . . . . . . . . . . . . . . . . 10

Safety Signs and Statements. . . . . . . . . . . . . . .1

Table of Contents

ii

1180453A

Models LCR55/LCS55 - Hand Pallet Truck

Note tells you information that will make operating easier or better.

NOTE

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

! CAUTION

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

1

Visually inspect the hand pallet truck frame components and hydraulic unit for damage during shipment by the carrier. If damage is evident, notify the delivering carrier immediately and file the necessary claims. Test the hand pallet truck pump for proper operation. If the hydraulic pump does not respond to movement of the handle, an air lock may have developed during shipping. To remedy this, go to the user friendly “Troubleshooting” guide on page 12 in this manual.

Delivery Inspection

This manual covers Models LCR55 and LCS55 versions, Raymond Hand Pallet Trucks.

This manual uses three types of safety signs and statements. Each is defined below.

! WARNING

Models Covered

Safety Signs and Statements

Safety Signs and Statements

Safety First

2

Operate this hand pallet lift truck responsibly. If you fail to follow the safety rules while using this hand pallet lift truck, you could hurt yourself or someone else, or damage equipment.

We built this hand pallet lift truck for one job — to handle and transport material. Use it for nothing else.

Any equipment can be hazardous if not used properly, including this hand pallet lift truck.

Operate this hand pallet lift truck only if you are authorized and trained to do so.

Before you use this hand pallet lift truck, read this manual completely. Make sure that you understand all of the content. If you do not understand any part of this manual, tell your supervisor.

Safety glasses Heavy-duty gloves

• •

Do not operate this hand pallet lift truck unless you are authorized and trained to do so.

Read and obey all warnings and instructions contained in this manual.

Do not use the hand pallet lift truck if it is damaged or has any faults that might affect either its safety or its safe use.

• • •

1180453A

Only handle loads on flat level surfaces.

Do not use a loaded truck on inclines or declines.

•

Follow these safety rules:

Safety Rules

Safety shoes

•

To avoid personal injury, always wear required personal protective equipment that includes the following:

Safe Use of This Hand Pallet Lift Truck is

Your Responsibility

Safety Equipment

Safety First

Always operate the hand pallet lift truck with care and good judgement. Be responsible.

Do not operate the hand pallet lift truck with oily hands or oily shoes, due to the risk of slipping.

Floors should be strong enough to handle the heaviest allowed load being transported.

Use extreme care around objects that stick out from racks, shelves, or walls. These objects can cause bodily injury or damage to the hand pallet lift truck.

Never carry passengers.

Never overload your hand pallet truck. Stay within the rated capacity.

Distribute the load evenly on the forks. Do not concentrate loads at one point or load one fork more than the other.

Never allow anyone to stand on or near the hand pallet lift truck’s forks.

•

•

•

•

•

•

•

•

Models LCR55/LCS55 - Hand Pallet Truck

Do not use the hand pallet lift truck if it has been repaired, modified, or adjusted, unless it has been checked and approved by your supervisor or another authorized person.

•

Horseplay is dangerous to personnel and equipment, and is not permitted.

•

Always yield the right-of-way to pedestrians.

Be aware of other lift trucks in the area; operate the hand pallet lift truck cautiously.

•

3

Always make sure that the load is stable before moving to eliminate the opportunity for load shift.

•

•

Do not run while operating this hand pallet lift truck.

Do not use in cold storage, salty, or other corrosive environments.

•

•

Never allow anyone to stand in front of or immediately near a loaded hand pallet lift truck.

•

Do not allow your hand pallet truck to drop from one level to another. Even a drop of 1 in. (25 mm) more than doubles the effected load momentarily and results in a “shock” that can bend or break components.

Use the hand pallet lift truck only to transport loads.

• •

Never put your feet, hands, or any other body part under the frame assembly.

•

Safety Rules

Safety Rules

4

Use extreme care when rounding corners. Too fast a speed could cause a hand pallet lift truck to tip. If loaded, the load could shift and fall.

When the load impairs visibility, the hand pallet lift truck should be pulled and not pushed.

Come to a stop gently and carefully to prevent the load from slipping off of the load carriers.

Always keep a safe distance from the edges of loading bays and loading ramps. Be attentive to marked risk areas.

Before operating a hand pallet lift truck over a loading ramp, make sure that the loading ramp is correctly secured and has the necessary load bearing capacity. Operate the hand pallet lift truck slowly and carefully across the ramp.

Securely set the brakes and block the wheels of highway trucks, trailers, and railroad cars before you load or unload them. Check the highway truck/trailer/railroad car doorway clearance. Make sure floors of highway trucks, trailers, and railroad cars will support the

•

•

•

•

•

•

Stop when approaching crossing aisles, when exiting an aisle, or when visibility is obstructed.

Before operating or moving a hand pallet lift truck into an elevator, make sure that the elevator is approved for total weight of the hand pallet lift truck, the load, the operator, and any other passenger in the elevator. When entering the elevator, the load must enter first—not the operator. No other person should be in the elevator when the load or hand pallet lift truck enters or leaves.

When not is use, lower the forks completely to avoid injury.

• •

•

1180453A

When parking a hand pallet lift truck on another vehicle, make sure that the parking brake, if equipped, has been applied and/or a parking rack, if available, is used.

•

weight of the loaded hand pallet truck. Cross railroad tracks only at approved floor grade crossings. Do not park hand pallet trucks within 8 ft. (2.4 m) of railroad tracks. Ask local railroad authorities or your supervisor which warning devices to use.

Models LCR55/LCS55 - Hand Pallet Truck

When lifting a hand pallet lift truck, using lifting equipment, it is recommended to use a hand pallet lift truck equipped with a lifting eye.

Injury may occur when lifting the hydraulic end of the hand pallet lift truck.

Cuts may occur when lifting the forks and end-plate.

Use extreme caution when lifting a hand pallet lift truck by hand.

! WARNING

To lift a hand pallet lift truck either by hand or with lifting equipment, follow these warning instructions.

Lifting the Hand Pallet Lift Truck

Report all accidents—personal, damage to buildings or equipment—to your supervisor immediately. All unsafe conditions on the hand pallet lift truck should also be reported.

Figure 1. Typical Hand Pallet Lift Truck Spec Plate

If any plate and/or decal becomes unreadable, it must be replaced. Contact your supervisor or local authorized Raymond Sales and Service Center for a replacement.

NOTE

5

The weight of the load must be within the hand pallet lift truck’s permitted lifting capacity. For load weight and lifting capacity rate, see the specification plate on the truck and Figure 1.

Hand Pallet Lift Truck Rating

Lifting the Hand Pallet Lift Truck

Operating Instructions

6

3. For free handle movement, place the lift/lower lever in the neutral position.

2. To lower the load, pull up on the lift/lower lever.

1. To lift the load, push down on the lift/lower lever. Pump the handle to lift the load from the floor.

For maximum operating efficiency, follow these instructions: (See Figure 2.)

Your head, arms, hands, legs, or feet can be seriously injured if they strike objects while the hand pallet truck is moving.

Keep your body clear of the pallet truck and nearby objects and your hands on the control handle while walking with a hand pallet truck.

! WARNING

Operating Instructions

1180453A

The neutral position disengages the pump from the lifting mechanism. This frees the handle, which makes pulling loads much easier. Also, the pump is not being subjected to shock pressures while the hand pallet lift truck is in motion.

NOTE

Figure 2. Lift/Lower Instructions

3

2

1

Models LCR55/LCS55 - Hand Pallet Truck

• Always keep your hands on the control handle.

• Before lowering, make sure the area beneath the forks is clear.

• Make sure that there are no conditions in the hydraulic system that may cause accidental lowering.

To avoid injury, do the following: (For location of numbered callouts, see Figure 3.)

Never ride on the hand pallet lift truck.

The hand pallet lift truck is used only to transport loads.

Always wear appropriate safety apparel, such as safety shoes, safety glasses, and heavy-duty gloves when working with a hand pallet lift truck.

! WARNING

Handling The Load

(3)

(2)

(5)

Figure 3. The Hand Pallet Lift Truck (See Table 1 on page 8.)

(4)

(1)

• Do not place your hands between the top cap (4) and the top nut (5).

• Do not place your hands between the control handle (1) and the control handle bracket (3).

7

Handling The Load

Parking the Hand Pallet Lift Truck

Control Handle Protective Clamps

Control Handle Bracket

Top Cap

Top Nut

2.

3.

4.

5.

8

Handle only loads that are within the hand pallet lift truck’s permitted lifting capacity.

Handle only loads that are stable, evenly distributed on the forks, and safely arranged.

Use caution when handling long and high loads. Load support is recommended for high loads.

Loaded or unloaded, operate the hand pallet lift truck with great care. Overturning can occur, particularly when handling high loads or when operating with a hand pallet lift truck fitted with a load support or an extension frame in the raised position.

•

•

•

•

Obey these rules when handling a load:

Control Handle

Name of Callout

1.

Callout Number

Table 1. Legend for Figure 3, The Hand Pallet Lift Truck

L

Use extreme care when cornering. If operating at too high a speed, the load could fall from the hand pallet lift truck.

Never park on an incline or with a raised load.

Never park in areas that could obstruct other traffic or work areas.

Never park in areas that could cause personal injury or damage to any equipment.

• • •

1180453A

Make sure that the fork frame is fully lowered.

•

When parking the hand pallet lift truck, follow these instructions:

Parking the Hand Pallet Lift Truck

•

Models LCR55/LCS55 - Hand Pallet Truck

2. Remove one split pin (Item 7) with a 3/16 in. punch.

1. Turn the hand pallet truck over so that the underside of the forks are accessible. Refer to Figure 5 on page 28.

LCR55 Model

If the forks do not rise evenly at the tips, or the roller levers begin to drag on the floor, adjust following these steps for that model:

Push Bar Linkage Adjustment

All pivot points are equipped with permanently lubricated bushings and bearings. To increase bearing life, it is recommended that a few drops of light machine oil be applied at each pivot point every 6 months. The thrust plate is equipped with three grease fittings. Apply grease under normal conditions every 6 months.

Lubrication

Maintenance

5. Replace pin (Item 33) through the eyebolt and replace split pin (Item 32).

4. Adjust the eyebolts (Item 35). Turn counterclockwise to raise the fork tips and clockwise to lower the fork tips.

3. Remove pin (Item 33) from the bracket.

2. Remove one split pin (Item 32) with a 3/16 in. punch.

1. Turn the hand pallet truck over so that the underside of the forks are accessible. Refer to Figure 6 on page 32.

LCS55 Model

6. When adjusted properly, the top of the forks should be 3 in. (76.2 mm) from ground level when in the lowered position.

5. Replace pin (Item 6) through the eyebolt and replace split pin (Item 7).

4. Adjust the eyebolts (Item 11). Turn counterclockwise to raise the fork tips and clockwise to lower the fork tips.

3. Remove pin (Item 6) from the bracket.

9

Maintenance

Maintenance

10

Oil to add (Fl. Oz.) 0 2.7

Distance (inches)

5-1/8 in.

4-3/4 in.

4. Measure the vertical height of the exposed piston (Item 20, Figure 4) and refer to the chart below.

3. Pump the truck to its maximum lift height.

2. Lower the truck and load with 600 lbs. (approximate).

1. Check for and fix any possible oil leaks.

Your hydraulic system is maintenance free. Do not add hydraulic oil unless there is, or has been, a leak. Use Premium HVI hydraulic oil or equal. Other oils, fluids, or solvents may damage your hydraulic system. If you suspect additional oil is required, follow these steps:

Hydraulic System

6. When adjusted properly, the top of the forks should be 3 in. (76.2 mm) from ground level when in the lowered position.

4.7

2-3/8 in.

1180453A

5. Pull up on the release lever (Item 3) and collapse the lift piston until oil starts to ooze from the screw.

4. Reinstall screw (Item 29) but do not tighten.

Leave a 1/32 in. gap.

3. Remove screw (Item 29) and add the amount of oil determined by the chart in step 4.

2. Pull up on the release lever (Item 3) and extend the lift piston fully.

1. Place and secure the truck on its right side (release valve facing the floor). Refer to Figure 4 on page 22.

Adding Oil (If Required)

4.4

3.7

3-1/2 in.

2-3/4 in.

3.4

4 in.

4.0

3.0

4-3/8 in.

3-1/8 in.

Oil to add (Fl. Oz.)

Distance (inches)

Tighten the screw (Item 29) fully and return the truck upright.

Models LCR55/LCS55 - Hand Pallet Truck

Before welding or grinding on painted surfaces always sandblast (remove) at least 4-6 in. (102-152 mm) of paint.

Heated paint gives off harmful gases.

! WARNING

Safety Regulations for Maintenance Work

6.

It is extremely important that step 5 is performed. Otherwise, air in the pump can force out the wiper seal (Item 24). Take care when adding oil not to introduce impurities into the hydraulic system.

! CAUTION

Never wear loose fitting objects or jewelry.

Properly store or dispose of used oil. Follow the manufacturer’s instructions.

Properly dispose of used solvents and all other cleaning/washing chemicals. Do not flush down drains. Follow the manufacturer’s instructions for proper disposal.

• • •

11

Always keep the area where you work clean.

Oil and/or water make the floor slippery.

•

Safe maintenance practices conform with the following general guidelines:

Always secure the hand pallet lift truck when carrying out repairs. A badly supported hand pallet lift truck could cause injury.

! WARNING

Safety Regulations for Maintenance Work

Troubleshooting

An air lock in the hydraulic system.

Chain anchor is out of adjustment.

Dirt or foreign particle is caught in the cone valve seat.

Pump is low on oil.

The push jam nut is loose. The push bars require adjustment.

Pump does not lift the load.

Lifting, neutral, and lowering do not function properly.

Forks raise and sink with pump action.

Pump does not lift the load to the complete raised height.

Forks are not lowering completely.

12

POSSIBLE CAUSE

CONDITION

Table 2. Troubleshooting

Use the troubleshooting procedures shown in Table 2 as a guide only. Do not try to service this lift truck. Contact your Service Department or your local authorized Raymond Sales and Service Center listed on the back of this manual.

Troubleshooting

Refer to Push Bar Linkage Adjustment in the MAINTENANCE section.

1180453A

Check for and fix any leaks. Then add oil as instructed in the MAINTENANCE section.

Pull up on the fingertip control and hold while pumping the handle 8 to 10 times to purge the valve system.

Turn the nut on the chain anchor clockwise until the pumping action, while in neutral, does not raise the forks.

Pull up on the fingertip control and hold while pumping the handle 8 to 10 times to bleed air from the system.

ACTION

Make sure that the brakes or hand/parking brake, if equipped, function properly.

Must have adequate oil level and no leakage. If not, contact your supervisor. (See page 10.)

Make sure there is no excessive oil on the exterior.

Brakes or Hand/ Parking Brake

Hydraulic System

Models LCR55/LCS55 - Hand Pallet Truck

Action

Check Points

Table 3. Daily Service/Safety Check

Read Table 3 for daily service check points and required safety action.

Never neglect the daily service and safety checks. Serious injury may occur. If you discover a fault or damage, report it immediately to your supervisor. Never use a hand pallet lift truck that has faults or is damaged.

! WARNING

Daily Service/Safety Checks

Check for damage. Clean often, removing dirt and any other debris.

If lift, neutral, and lower positions are not functioning properly, contact your supervisor.

Make sure that all decals and plates are in place and legible. If not, contact your supervisor or local authorized Raymond Sales and Service Center for a replacement.

Make sure that steering functions properly. Make sure there is full steering rotation.

Chassis/Handle

Lifting/Lowering

Decals and Plates

Steering

13

Check for damage. Remove oil, metal chips, and anything else that might cause wear and abrasion.

Wheels

Table 3. Daily Service/Safety Check

Daily Service/Safety Checks

Modifications and Additions

14

In order to submit a claim for a warranty, you must supply the hand pallet lift truck serial number as well as the date of purchase to your local authorized Raymond Sales and Service Center.

Warranty Claim Procedure

Replacement parts should be “Raymond Approved” and obtained from your local authorized Raymond Sales and Service Center.

Modifications or additions to this hand pallet lift truck that affect its safe use or operation are not permitted without written approval from the manufacturer.

Modifications and Additions

1180453A

Steel Steel and cast iron Brass Steel Nylon/Polyurethane/Steel Cast iron Cast iron Steel Nylon/Polyurethane/Steel Brass Disposal in accordance with local regulations Steel, brass, nylon

Chassis

Roller suspension

Bushings

Grease fittings

Rollers

Hydraulic body

Thrust plate

Handle

Wheel

Bushings

Hydraulic oil

Assembly parts

Models LCR55/LCS55 - Hand Pallet Truck

Material

Component

Recycling Your Old Raymond Parts

15

Recycling Your Old Raymond Parts

Hand Pallet Truck Warranty

16

This warranty is void in the event of defects or damage caused by misuse, abuse, or accident. Any truck used under adverse conditions, such as fish, meat or poultry processing plants, tanneries, freezer applications, or any other application where the unit is operating in water or subjected to fluid or chemicals is NOT covered under any warranty.

Components found to be defective by an authorized Raymond Sales and Service Center during the warranty period will be replaced or repaired as indicated above. Replacement components installed during the defined period set forth above, are warranted for the balance of the applicable truck warranty period, or 90 days, whichever is longer. Additionally, freight charges for parts involved in the replacement or repair of a defective component will be paid by Raymond, provided that the replacement or repair is made by an authorized Raymond Sales and Service Center. Labor or miscellaneous costs involved in the replacement of any components determined to be defective are not covered. Local taxes, if any, are excluded.

• Oilite Bearings and Bushings

• Wheels, Rollers, and Bearings

Wearable Components include but are not limited to:

The Raymond Hand Pallet Trucks, Models LCR55 and LCS55 versions, are warranted against defects in materials and workmanship for a period of two (2) years for the hydraulic pump, one (1) year for the truck chassis, and six (6) months for wearable components. All periods begin from date of installation.

Hand Pallet Truck Warranty

1180453A

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY. THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event shall The Raymond Corporation be liable for incidental, special, or consequential damages.

Notwithstanding any other language contained herein, this warranty is expressly voided without any further notice if any modification is made to the Raymond equipment, or if additional components or devices are added to the Raymond equipment, without prior approval having been granted in writing by The Raymond Corporation.

The Raymond Corporation reserves the right to make changes and improvements in design without making changes to previously manufactured vehicles.

This warranty does not cover oil leaks, adjustments, or loose hardware.

Models LCR55/LCS55 - Hand Pallet Truck

• The user shall see that all nameplates and markings are in place and are maintained in a legible condition. (a) (6)

• Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation and maintenance instruction plates, tags or decals shall be changed accordingly. (a) (3)

The following citations are followed by a reference to the appropriate subparagraph of the regulations.

The full text of the Federal regulations can be found in the Code of Federal Regulations at 29 CFR Section 1910.178.

Because of their wide applicability, this section of your manual lists several parts of the Federal OSHA regulations that might be of particular importance to your workplace.

Check with your local OSHA office or provincial Labor Bureau to confirm which regulations govern your workplace.

In addition, several states have implemented regulations which apply instead of the Federal regulations.

The use of forklift trucks in the workplace is governed by various regulations. In the United States, the Federal Occupational Safety and Health Administration (OSHA) has issued regulations which cover the majority of workplaces.

Note: Some or all of the following may not be applicable to your hand pallet lift truck.

Selected OSHA Regulations for Lift Trucks

• An evaluation of each powered industrial truck operator’s performance shall be conducted at least once every three years. (l) (4) (iii)

17

• Refresher training, including an evaluation of the effectiveness of that training, shall be conducted as required by paragraph (l) (4) (ii) to ensure that the operator has the knowledge and skills needed to operate the powered industrial truck safely. (l) (4) (i)

• Training shall consist of a combination of formal instruction (e.g. lecture, discussion, interactive computer learning, videotape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator’s performance in the workplace. (l) (2) (B) (ii) [Editorial Note: For required training program content, refer to (l) (3) (i) (A-M) and (l) (3) (ii) (A-I).]

• Trainees may operate a powered industrial truck only under the direct supervision of persons who have the knowledge, training, and experience to train operators and evaluate their competence and where such operation does not endanger the trainee or other employees. (l) (2) (i) (A) (B)

• Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph. (l) (1) (ii)

• The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph. (l) (1) (i)

Selected OSHA Regulations for Lift Trucks

Selected OSHA Regulations for Lift Trucks

18

• Stunt driving and horseplay shall not be permitted. (n) (9)

• Under all travel conditions the truck shall be operated at a speed that permits it to be brought to a stop in a safe manner. (n) (8)

• The driver shall be required to slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver shall be required to travel with the load trailing. (n) (4)

• All traffic regulations shall be observed, including authorized plant speed limits. A safe distance shall be maintained approximately three truck lengths from the truck ahead, and the truck shall be kept under control at all times. (n) (1)

• Only approved industrial trucks shall be used in hazardous locations. (m) (11)

• Brakes shall be set and wheel blocks shall be in place to prevent movement of trucks, trailers or railroad cars while loading or unloading. Fixed jacks may be necessary to support a semitrailer when the trailer is not coupled to a tractor. The flooring of trucks, trailers, and railroad cars shall be checked for breaks and weakness before they are driven onto. (m) (7)

• The employer shall prohibit arms or legs from being placed between the uprights of the mast or outside the running lines of the truck. (m) (4)

• The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation. (l) (6)

1180453A

• Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the truck. Such examination shall be made at least daily. Where powered industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected. (q) (7)

• All parts of any such industrial truck requiring replacement shall be replaced only by parts equivalent as to safety with those used in the original design. (q) (5)

• Any power-operated industrial truck not in safe operating condition shall be removed from service. All repairs shall be made by authorized personnel. (q) (1)

• If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition. (p) (1)

Part No.

Qty. Page

Models LCR55/LCS55 - Hand Pallet Truck

Ball ....................................... 20065............... 1 ...... 25 Ball, Chrome .......................... 20065............... 2 ...... 23 Bearing ................................. 22226............... 4 ...... 25 Bearing, Ball .......................... 213056............. 1 ...... 25 Bearing, Load Roller................ PL-20214 ........... 2 ...... 34 Bearing, Roller, Load............... PL-20214 ........... 4 ...... 30 Bushing ................................. 215913............. 2 ...... 24 Bushing ................................. PL-20203 ........... 4 ...... 34 Bushing ................................. PL-20203A ......... 2 ...... 33 Bushing ................................. PL-20206 ........... 4 ...... 29 Bushing ................................. PL-20206 ........... 4 ...... 33 Bushing ................................. PL-20226A ......... 2 ...... 33 Bushing ................................. PL-30206 ........... 2 ...... 29 Bushing ................................. PL-30206 ........... 2 ...... 33 Bushing ................................. PN-20203.......... 4 ...... 30 Bushing ................................. PN-20203A ....... 1 ...... 29 Bushing ................................. PN-20226A ....... 2 ...... 29 Fitting, Grease........................ 27662............... 1 ...... 25 Fitting, Grease........................ 27662............... 2 ...... 29 Fitting, Grease........................ 27662............... 2 ...... 33 O-Ring (Overload) .................. 22032............... 1 ...... 24 O-Ring................................... 22032............... 1 ...... 25 O-Ring................................... 24213............... 1 ...... 24 Pin, Locking ........................... 20001............... 2 ...... 25

Description

Recommended Spare Parts List Part No.

Qty.

Page

Pin, Locking ........................... 20014............... 1 ...... 24 Pin, Locking ........................... 21737............... 1 ...... 25 Pin, Locking ........................... 220312............. 1 ...... 23 Pin, Locking ........................... 220312............. 1 ...... 25 Pin, Split................................ 20105............... 1 ...... 23 Pin, Split................................ 20461............... 1 ...... 23 Pin, Split................................ PL-20269 ........... 6 ...... 33 Pin, Split................................ PN-20269.......... 4 ...... 30 Pin, Split................................ PN-20269B........ 2 ...... 29 Ring, Sealing ......................... 7500105CE ...... 1 ...... 24 Sealing ................................. 20066............... 1 ...... 24 Sealing ................................. 215866............. 1 ...... 24 Sealing ................................. 215867............. 1 ...... 24 Sleeve ................................... 215803............. 1 ...... 23 Sleeve, Control Lever .............. 54140............... 1 ...... 23 Spring................................... 215156............. 1 ...... 24 Spring................................... 39106............... 1 ...... 24 Spring................................... 47071............... 1 ...... 25 Spring, Control Lever .............. 218182............. 1 ...... 23 U-Ring ................................... 7500100........... 1 ...... 25

Description

19

Recommended Spare Parts List

Hardware Parts List

Part No.

Qty.

20

Nut, Adjusting .............................. 21094.................... 1 Nut, Jam ...................................... PL-10224AF ............ 2 Nut, Jam ...................................... PN-10224AF........... 2 Nut, Lock ..................................... PL-10218 ................ 2 Nut, Lock ..................................... PL-10218 ................ 2 Ring, Locking................................ 20019.................... 2 Ring, Locking................................ 20043.................... 1 Ring, Locking................................ 20642.................... 1 Screw (Overload).......................... 221232.................. 1 Screw .......................................... 221586.................. 1 Washer ....................................... 215282.................. 1 Washer ....................................... 215288.................. 1 Washer ....................................... 235545.................. 1

Description

Hardware Parts List

1180453A

Models LCR55/LCS55 - Hand Pallet Truck

21

Hardware Parts List

Complete Hydraulic Assembly (PL-30278BN)

22

5

4

12

13

10

14

9

8

3

15

11

1

58 56

57

55

54

31

29 32

53

49

33

30

25

22

21

19

18

16

ITEM 60

28

41 40

39

50

34

27

43

35

51

42

47

37

52

48

38

36

26

24

23

20

17

Figure 4: Complete Hydraulic Assembly (PL-30278BN)

7

6

2

Complete Hydraulic Assembly (PL-30278BN)

46

45

1180453A

1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 1 1 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PL-30278BN PL-40276M 20105 PL-40274BDM 54140 218182 20065 215775 20461 47930 202755 7500086 21094 220312 215128 156623BT 20043 215803 215282

PART NUMBER

Complete Hydraulic Assembly Complete Handle (includes: Items 2-10) Pin, Split Lever, Control Sleeve, Control Lever Spring, Control Lever Ball, Chrome Rod Assembly, Control Pin, Split Axle Roller with Bushing Axle Nut, Adjusting Pin, Locking Arm, Lowering Cover Ring, Locking Sleeve Washer

DESCRIPTION

Models LCR55/LCS55 - Hand Pallet Truck

List 4: Complete Hydraulic Assembly (PL-30278BN) (Sheet 1 of 4)

R= Recommended Spare

QTY

FIGURE 4 ITEM NO.

R

R

R

R R R

R

USED ON

23

Complete Hydraulic Assembly (PL-30278BN)

Complete Hydraulic Assembly (PL-30278BN)

24

1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Spring Piston Piston Ring, Sealing Ring, Locking Sealing Sealing Sealing Pin, Locking Bushing Screw O-Ring Washer Spring Cone, Valve Screw (Overload) O-Ring (Overload) Spring (Overload) Pin, Guide (Overload) Ball (Overload)

DESCRIPTION

List 4: Complete Hydraulic Assembly (PL-30278BN) (Sheet 2 of 4)

215156 215030 215286 7500105CE 20642 20066 215866 215867 20014 215913 221586 24213 235545 39106 223935 221232 22032 221227 221231 22055

PART NUMBER

R= Recommended Spare

QTY

FIGURE 4 ITEM NO.

R

R

R

R R R R R

R

R

1180453A

USED ON

1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 4 2 2

39 40 41 42 43 45 46 47 48 49 50 51 52 53 54 55 56 57 58

Ball Washer O-Ring Body, Valve Spring U-Ring Piston Valve, Lowering (Complete) Bearing, Ball Pin, Locking Pin, Locking Plate, Thrust Pin, Locking Fitting, Grease Ring, Locking Spacer (Required With 200965BT Only) Axle Bearing Wheel Complete, Nylon Wheel Complete, Poly

DESCRIPTION

Models LCR55/LCS55 - Hand Pallet Truck

List 4: Complete Hydraulic Assembly (PL-30278BN) (Sheet 3 of 4)

20065 215288 22032 7500112 47071 7500100 7500116 7518604CE 213056 220312 20001 215092 21737 27662 20019 161637 220310 22226 251189 160422

PART NUMBER

R= Recommended Spare

QTY

FIGURE 4 ITEM NO.

R

R R

R R R

R R

R

R

USED ON

25

Complete Hydraulic Assembly (PL-30278BN)

Complete Hydraulic Assembly (PL-30278BN)

26

PART NUMBER

200965BT 160433 220069 243772

QTY

2 2 1 1

Wheel Complete, Poly/Steel Wheel Complete, Steel Hydraulic Unit Rebuild Kit

DESCRIPTION

List 4: Complete Hydraulic Assembly (PL-30278BN) (Sheet 4 of 4)

R= Recommended Spare

60

FIGURE 4 ITEM NO.

1180453A

USED ON

Models LCR55/LCS55 - Hand Pallet Truck

27

Complete Hydraulic Assembly (PL-30278BN)

Chassis Diagram, Model LCR55

28

10

8

9

3

2

9

8

10

1

7

6

5 11

12

13

4

14

15

17 16

Figure 5: Chassis Diagram, Model LCR55

3

Chassis Diagram, Model LCR55

16

18

22

19

22 20

24

1-24_LCR55CHASSIS

17 18

21

23

1180453A

1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 4

1 2

Chassis (Specify Length and Width) Bar, Torsion (20.5 in. Wide Truck) Bar, Torsion (27 in. Wide Truck) Bushing Pin, Bulkhead Pin, Split Pin, Eye Bolt Pin, Split Pin, Thrust Plate (with Grease Fitting) Bushing Fitting, Grease Eye Bolt Nut, Jam Bushing Bar, Push (36 in. Long Fork) Bar, Push (42 in. Long Fork) Bar, Push (48 in. Long Fork) Roller, Exit Bushing

DESCRIPTION

Models LCR55/LCS55 - Hand Pallet Truck

List 5: Chassis Diagram, Model LCR55 (Sheet 1 of 2)

Consult Factory PN-30201 PN-30202 PN-20203A PN-20204 20174 PN-20227 PN-20269B 166701 PL-30206 27662 PN-20226 PN-10224AF PN-20226A PN-20224X36 PN-20224X42 PN-20224X48 PN-20220 PL-20206

PART NUMBER

R= Recommended Spare

15 16

3 4 5 6 7 8 9 10 11 12 13 14

QTY

FIGURE 5 ITEM NO.

R

R

R R

R

R

USED ON

29

Chassis Diagram, Model LCR55

Chassis Diagram, Model LCR55

30

4 2 4 2 2 2 2 4 2 2

17 18 19 20 21

Bushing Lever Arm Assembly with Bushings Pin, Split Pin, Fork Roller, Load (Nylon with Bearings) Roller, Load (Poly with Bearings) Roller, Load (Steel with Bearings) Bearing, Roller, Load Axle Assembly Nut, Lock

DESCRIPTION

List 5: Chassis Diagram, Model LCR55 (Sheet 2 of 2)

PN-20203 PN-20212 PN-20269 PN-20219 PL-20210BN-B 167609 PL-20210S-BRG PL-20214 PL-20215 PL-10218

PART NUMBER

R= Recommended Spare

22 23 24

QTY

FIGURE 5 ITEM NO.

R

R

R

1180453A

USED ON

Models LCR55/LCS55 - Hand Pallet Truck

31

Chassis Diagram, Model LCR55

Chassis Diagram, Model LCS55

32

28

29

30

27

26

30

29

32

33 35

32 36

37

31

38

41

43 39

Figure 6: Chassis Diagram, Model LCS55

28

27

25

Chassis Diagram, Model LCS55

39

44

46

32

46 42

48

25-48_LCS55CHASSIS

43 44

45

47

1180453A

1 1 2 2 2 2 2 6 2 2 2 2 2 2 2 2 4 2 2

25 26 27 28 29 30 31 32 33 35 36 37 38

Chassis (Specify Length and Width) Bar, Torsion (Specify Truck Width) Bushing Fitting, Grease Pin, Thrust Plate (with Grease Fitting) Bushing Pin, Bulkhead Pin, Split Pin, Eye Bolt Bolt, Eye Nut, Jam Bushing Bar, Push (36 in. Long Fork) Bar, Push (60 in. Long Fork) Bar, Push (72 in. Long Fork) Bar, Push (96 in. Long Fork) Bushing Roller, Exit Pin, Fork

DESCRIPTION

Models LCR55/LCS55 - Hand Pallet Truck

List 6: Chassis Diagram, Model LCS55 (Sheet 1 of 2)

Consult Factory Consult Factory PL-20203A 27662 166701 PL-30206 PL-20204 PL-20269 PL-20227 PL-20226 PL-10224AF PL-20226A PL-20224X36 1124207-002 1124207-003 1124210-002 PL-20206 PL-20220 PL-20219

PART NUMBER

R= Recommended Spare

39 41 42

QTY

FIGURE 6 ITEM NO.

R

R

R

R

R R

USED ON

33

Chassis Diagram, Model LCS55

Chassis Diagram, Model LCS55

34

4 2 2 2 2 2 2 2

43 44 45

Bushing Lever Arm with Bushings Roller, Load (Nylon with Bearings) Roller, Load (Poly with Bearings) Roller, Load (Steel with Bearings) Bearing, Load Roller Axle Assembly Nut, Lock

DESCRIPTION

List 6: Chassis Diagram, Model LCS55 (Sheet 2 of 2)

PL-20203 PL-20212 PL-20210BN-B 167609 PL-20210S-BRG PL-20214 PL-20215 PL-10218

PART NUMBER

R= Recommended Spare

46 47 48

QTY

FIGURE 6 ITEM NO.

R

R

1180453A

USED ON

Part No.

Page

Models LCR55/LCS55 - Hand Pallet Truck

Arm, Lowering .............................. 215128 ............... 23 Axle Assembly .............................. PL-20215 ............. 30 Axle Assembly .............................. PL-20215 ............. 34 Axle ............................................ 220310 ............... 25 Axle ............................................ 47930 ................. 23 Axle ............................................ 7500086 ............. 23 Ball (Overload) ............................. 22055 ................. 24 Ball ............................................. 20065 ................. 25 Ball, Chrome ................................ 20065 ................. 23 Bar, Push (36 in. Long Fork) ........... PL-20224X36 ....... 33 Bar, Push (36 in. Long Fork) ........... PN-20224X36 ...... 29 Bar, Push (42 in. Long Fork) ........... PN-20224X42 ...... 29 Bar, Push (48 in. Long Fork) ........... PN-20224X48 ...... 29 Bar, Push (60 in. Long Fork) ........... 1124207-002 ...... 33 Bar, Push (72 in. Long Fork) ........... 1124207-003 ...... 33 Bar, Push (96 in. Long Fork) ........... 1124210-002 ...... 33 Bar, Torsion (20.5 in. Wide Truck) .. PN-30201 ............ 29 Bar, Torsion (27 in. Wide Truck) ..... PN-30202 ............ 29 Bar, Torsion (Specify Truck Width) .. Consult Factory ..... 33 Bearing........................................ 22226 ................. 25 Bearing, Ball ................................ 213056 ............... 25 Bearing, Load Roller ...................... PL-20214 ............. 34 Bearing, Roller, Load ..................... PL-20214 ............. 30 Body, Valve.................................. 7500112 ............. 25 Bolt, Eye ...................................... PL-20226 ............. 33

Description

APPENDIX A: Alphabetical Parts Index Part No.

Page

Bushing ........................................215913 .............. 24 Bushing ........................................PL-20203 ............. 34 Bushing ........................................PL-20203A ........... 33 Bushing ........................................PL-20206 ............. 29 Bushing ........................................PL-20206 ............. 33 Bushing ........................................PL-20226A ........... 33 Bushing ........................................PL-30206 ............. 29 Bushing ........................................PL-30206 ............. 33 Bushing ........................................PN-20203 ........... 30 Bushing ........................................PN-20203A ......... 29 Bushing ........................................PN-20226A ......... 29 Chassis (Specify Length and Width) .................................Consult Factory ..... 29 Chassis (Specify Length and Width) .................................Consult Factory ..... 33 Complete Handle...........................PL-40276M .......... 23 Complete Hydraulic Assembly .........PL-30277 ............. 23 Cone, Valve ..................................223935 .............. 24 Cover ...........................................156623BT ........... 23 Eye Bolt ........................................PN-20226 ........... 29 Fitting, Grease...............................27662 ................ 25 Fitting, Grease...............................27662 ................ 29 Fitting, Grease...............................27662 ................ 33 Hydraulic Unit ...............................220069 .............. 26 Lever Arm Assembly with Bushings ...PN-20212 ........... 30

Description

35

APPENDIX A: Alphabetical Parts Index

APPENDIX A: Alphabetical Parts Index

Part No.

Page

36

Lever Arm with Bushings................. PL-20212 ............. 34 Lever, Control ............................... PL-40274BDM ...... 23 Nut, Adjusting .............................. 21094 ................. 23 Nut, Jam ...................................... PL-10224AF ......... 33 Nut, Jam ...................................... PN-10224AF ........ 29 Nut, Lock ..................................... PL-10218 ............. 30 Nut, Lock ..................................... PL-10218 ............. 34 O-Ring (Overload)......................... 22032 ................. 24 O-Ring ......................................... 22032 ................. 25 O-Ring ......................................... 24213 ................. 24 Pin, Bulkhead................................ PL-20204 ............. 33 Pin, Bulkhead................................ PN-20204 ............ 29 Pin, Eye Bolt ................................. PL-20227 ............. 33 Pin, Eye Bolt ................................. PN-20227 ............ 29 Pin, Fork ...................................... PL-20219 ............. 33 Pin, Fork ...................................... PN-20219 ............ 30 Pin, Guide (Overload) ................... 221231 ............... 24 Pin, Locking .................................. 20001 ................. 25 Pin, Locking .................................. 20014 ................. 24 Pin, Locking .................................. 21737 ................. 25 Pin, Locking .................................. 220312 ............... 23 Pin, Locking .................................. 220312 ............... 25 Pin, Split ...................................... 20105 ................. 23 Pin, Split ...................................... 20174 ................. 29 Pin, Split ...................................... 20461 ................. 23 Pin, Split ...................................... PL-20269 ............. 33 Pin, Split ...................................... PN-20269 ............ 30 Pin, Split ...................................... PN-20269B .......... 29

Description

Part No.

Page

1180453A

Pin, Thrust Plate (with Grease Fitting) .....................166701 .............. 29 Pin, Thrust Plate (with Grease Fitting) .....................166701 .............. 33 Piston ...........................................215030 .............. 24 Piston ...........................................215286 .............. 24 Piston ...........................................7500116 ............ 25 Plate, Thrust...................................215092 .............. 25 Rebuild Kit ....................................243772 .............. 26 Ring, Locking.................................20019 ................ 25 Ring, Locking.................................20043 ................ 23 Ring, Locking.................................20642 ................ 24 Ring, Sealing.................................7500105CE ........ 24 Rod Assembly, Control ...................215775 .............. 23 Roller with Bushing .........................202755 .............. 23 Roller, Exit.....................................PL-20220 ............. 33 Roller, Exit.....................................PN-20220 ........... 29 Roller, Load (Nylon with Bearings) ...PL-20210BN-B ...... 30 Roller, Load (Nylon with Bearings) ...PL-20210BN-B ...... 34 Roller, Load (Poly with Bearings) ......167609 .............. 30 Roller, Load (Poly with Bearings) ......167609 .............. 34 Roller, Load (Steel with Bearings) .....PL-20210S-BRG .... 30 Roller, Load (Steel with Bearings) .....PL-20210S-BRG .... 34 Screw (Overload)...........................221232 .............. 24 Screw ...........................................221586 .............. 24 Sealing .........................................20066 ................ 24 Sealing .........................................215866 .............. 24 Sealing .........................................215867 .............. 24 Sleeve ..........................................215803 .............. 23

Description

Part No.

Page

Models LCR55/LCS55 - Hand Pallet Truck

Sleeve, Control Lever ..................... 54140 ................. 23 Spacer (Required With 200965BT Only)................. 161637 ............... 25 Spring (Overload) ......................... 221227 ............... 24 Spring ......................................... 215156 ............... 24 Spring ......................................... 39106 ................. 24 Spring ......................................... 47071 ................. 25 Spring, Control Lever ..................... 218182 ............... 23 U-Ring ......................................... 7500100 ............. 25 Valve, Lowering (Complete)............ 7518604CE ........ 25 Washer ....................................... 215282 ............... 23 Washer ....................................... 215288 ............... 25 Washer ....................................... 235545 ............... 24 Wheel Complete, Nylon ................ 251189 ............... 25 Wheel Complete, Poly ................... 160422 ............... 25 Wheel Complete, Poly/Steel .......... 200965BT ........... 26 Wheel Complete, Steel .................. 160433 ............... 26

Description

Description

Part No.

Page

37

APPENDIX A: Alphabetical Parts Index

APPENDIX A: Alphabetical Parts Index 38 1180453A

Description

Page

Models LCR55/LCS55 - Hand Pallet Truck

1124207-002 ....... Bar, Push (60 in. Long Fork).................33 1124207-003 ....... Bar, Push (72 in. Long Fork).................33 1124210-002 ....... Bar, Push (96 in. Long Fork).................33 156623BT............. Cover ...............................................23 160422 ................ Wheel Complete, Poly ........................25 160433 ................ Wheel Complete, Steel .......................26 161637 ................ Spacer (Required With 200965BT Only)25 166701 ................ Pin, Thrust Plate (with Grease Fitting) ....29 166701 ................ Pin, Thrust Plate (with Grease Fitting) ....33 167609 ................ Roller, Load (Poly with Bearings)...........30 167609 ................ Roller, Load (Poly with Bearings)...........34 20001 .................. Pin, Locking .......................................25 20014 .................. Pin, Locking .......................................24 20065 .................. Ball...................................................25 20065 .................. Ball, Chrome .....................................23 20066 .................. Sealing .............................................24 200965BT............. Wheel Complete, Poly/Steel................26 20105 .................. Pin, Split............................................23 20174 .................. Pin, Split............................................29 202755 ................ Roller with Bushing .............................23 20461 .................. Pin, Split............................................23 213056 ................ Bearing, Ball......................................25 215030 ................ Piston................................................24 215092 ................ Plate, Thrust .......................................25 215128 ................ Arm, Lowering ...................................23

Part No.

APPENDIX B: Numerical Parts Index Description

Page

39

215156................ Spring .............................................. 24 215286................ Piston ............................................... 24 215775 ................ Rod Assembly, Control ........................ 23 215803................ Sleeve .............................................. 23 215866................ Sealing ............................................. 24 215867................ Sealing ............................................. 24 215913................ Bushing............................................. 24 21737 .................. Pin, Locking ....................................... 25 218182................ Spring, Control Lever .......................... 23 220069................ Hydraulic Unit ................................... 26 220310................ Axle ................................................. 25 220312................ Pin, Locking....................................... 23 220312................ Pin, Locking....................................... 25 22032 .................. O-Ring (Overload).............................. 24 22032 .................. O-Ring .............................................. 25 22055 .................. Ball (Overload) .................................. 24 221227................ Spring (Overload) .............................. 24 221231................ Pin, Guide (Overload) ........................ 24 22226 .................. Bearing............................................. 25 223935................ Cone, Valve ...................................... 24 24213 .................. O-Ring .............................................. 24 243772................ Rebuild Kit......................................... 26 251189................ Wheel Complete, Nylon ..................... 25 27662 .................. Fitting, Grease ................................... 25 27662 .................. Fitting, Grease ................................... 29

Part No.

APPENDIX B: Numerical Parts Index

APPENDIX B: Numerical Parts Index

Description

Page

40

27662...................Fitting, Grease................................... 33 39106...................Spring .............................................. 24 47071...................Spring .............................................. 25 47930...................Axle ................................................. 23 54140...................Sleeve, Control Lever.......................... 23 7500086...............Axle ................................................. 23 7500100...............U-Ring .............................................. 25 7500105CE ..........Ring, Sealing..................................... 24 7500112...............Body, Valve....................................... 25 7500116...............Piston ............................................... 25 7518604CE ..........Valve, Lowering (Complete)................. 25 Consult Factory.......Bar, Torsion (Specify Truck Width)........ 33 Consult Factory.......Chassis (Specify Length and Width) ..... 29 Consult Factory.......Chassis (Specify Length and Width) ..... 33 PL-20203 ...............Bushing ............................................ 34 PL-20203A.............Bushing ............................................ 33 PL-20204 ...............Pin, Bulkhead .................................... 33 PL-20206 ...............Bushing ............................................ 29 PL-20206 ...............Bushing ............................................ 33 PL-20210BN-B ........Roller, Load (Nylon with Bearings) ....... 30 PL-20210BN-B ........Roller, Load (Nylon with Bearings) ....... 34 PL-20210S-BRG ......Roller, Load (Steel with Bearings) ......... 30 PL-20210S-BRG ......Roller, Load (Steel with Bearings) ......... 34 PL-20212 ...............Lever Arm with Bushings ..................... 34 PL-20214 ...............Bearing, Load Roller........................... 34 PL-20214 ...............Bearing, Roller, Load .......................... 30 PL-20215 ...............Axle Assembly................................... 30 PL-20215 ...............Axle Assembly................................... 34 PL-20219 ...............Pin, Fork ........................................... 33

Part No.

Description

Page

1180453A

PL-20220 ............... Roller, Exit ........................................ 33 PL-20224X36 ......... Bar, Push (36 in. Long Fork) ................ 33 PL-20226 ............... Bolt, Eye ........................................... 33 PL-20226A............. Bushing ............................................ 33 PL-20227 ............... Pin, Eye Bolt...................................... 33 PL-20269 ............... Pin, Split ........................................... 33 PL-30206 ............... Bushing ............................................ 29 PL-30206 ............... Bushing ............................................ 33 PL-30277 ............... Complete Hydraulic Assembly ............. 23 PL-40274BDM ........ Lever, Control .................................... 23 PL-40276M ............ Complete Handle............................... 23 PN-20203 ............. Bushing ............................................ 30 PN-20203A ........... Bushing ............................................ 29 PN-20204 ............. Pin, Bulkhead .................................... 29 PN-20212 ............. Lever Arm Assembly with Bushings....... 30 PN-20219 ............. Pin, Fork ........................................... 30 PN-20220 ............. Roller, Exit ........................................ 29 PN-20224X36........ Bar, Push (36 in. Long Fork) ................ 29 PN-20224X42........ Bar, Push (42 in. Long Fork) ................ 29 PN-20224X48........ Bar, Push (48 in. Long Fork) ................ 29 PN-20226 ............. Eye Bolt ............................................ 29 PN-20226A ........... Bushing ............................................ 29 PN-20227 ............. Pin, Eye Bolt...................................... 29 PN-20269 ............. Pin, Split ........................................... 30 PN-20269B............ Pin, Split ........................................... 29 PN-30201 ............. Bar, Torsion (20.5 in. Wide Truck) ....... 29 PN-30202 ............. Bar, Torsion (27 in. Wide Truck) .......... 29

Part No.

Models LCR55/LCS55 - Hand Pallet Truck

Maintenance 9 Adding Oil 10 Hydraulic System 10 Linkage Adjustment, Push Bar 9 Lubrication 9 Model LCR55 9

M

Lift/Lower Instructions 6

L

Hand Pallet Lift Truck Lifting 5 Parking 8 Rating 5 Handling The Load 7

H

Daily Service 13 Delivery Inspection 1

D

Control Handle 6

C

Alphabetical Index

Troubleshooting 12 Typical Hand Pallet Lift Truck Specification Plate 5

T

Safe Use of Hand Pallet Lift Truck 2 Safety Checks 13 Safety Equipment 2 Safety Regulations for Maintenance Work 11 Safety Responsibility 2 Safety Rules 2–5 Safety Signs 1 Safety Statements 1 Specification Plate 5

S

Recycling Your Old Raymond Parts 15

R

Operating Instructions 6 OSHA Regulations 17

O

LCS55 9 Models Covered 1 Modifications and Additions 14

41

Alphabetical Index

Alphabetical Index

42

Warranty Claim Procedure 14 Warranty, Hand Pallet Truck 16

W

1180453A

Printed by the Digital Print Center , The Raymond Corporation, Greene, NY

Installed by (Technician’s Name):

Lift Truck Serial Number:

Telephone Number:

1180453A

1180453A

Your Local Authorized Raymond Sales and Service Center is:

01 Oct 2013