) VG 68 Chains Klüberoil 4UH 1-68N P/N 1230640 < +41° (+5°) < +113° (+45°) VG 150 Chains Klüberoil 4UH 1-150N P/N 1230641 >+113 ° (+45°) <+176° 80°C VG 220 Chains Klüberoil 4UH 1-220N P/N 1230642 > -40° (-40°) < +5° (-15°) ISO-VG 15 Hydraulic system > -15°C < +113° (+45°) ISO-HM 32 Hydraulic system 75W-90 Synthetic Gear Oil API Service GL-5 Gears > -40° (-40°) < +5° (-15°) --------- Contact surfaces Klüber Paste 46 MR 401 for support rollers P/N 1230643 > -15°C < +113° (+45°) --------- Contact surfaces Grafloscon C-SG 2000 Ultra for support rollers P/N 1230644 > -40° (-40°) < +5° (-15°) --------- Rotation bearings Polylube GLY 801 and interruption (Klüber) P/N 1230638 rollers > +5° (-15°) < +113° (+45°) --------- Rotation bearings and interruption Microlube GL 261 P/N 1230649 rollers > -40° (-40°) < +5° (-15°) EP2 Mast girders Gleitmo 805 P/N 1230645 Q8 Rubens LT P/N 1230646 > +5° (-15°) < +113° (+45°) EP2 Mast girders Gleitmo 805 P/N 1230645 Q8 Rembrandt EP2 P/N 1230647 --------- Articulated center axle, rotating bearing and bushings for the pulley rollers Polylube GLY 801 (Klüber) P/N 1230638 Transmission all applications oil Grease Grease Grease Grease Publication: 1203870 ° ° > -40 (-40 ) < +5° (-15°) 5–1 990-655/001 (1 qt./0.9 liter) 990-655/003 (1 gal./3.8 liters) Issued: 20 Jan 20163a:T574,Model 9800 Swing-Reach® Lift Truck Frame pivot – 0320 Removal/Reassembly of Rear Chassis 7. Frame pivot – 0320 7.1 Removal/Reassembly of Rear Chassis These instructions explain how to disassemble and reassemble the rear chassis and replace the bearings in the pivots. 7.1.1 Special Tools • Mast tool set P/N V10-16169 (blocking of mast and operator’s compartment) • Remote control P/N 214303 (lifting operator’s compartment from outside) • Stabilizing block set – P/N 245344 Front block: 2x P/N 245314 (weight approx. 88 lb. (40 kg) each) Rear block: 2x P/N 245286 Bolts: 8x P/N 20002 (M12x30) Washers: 8x