Maintenance

GENERAL

Always check oil level and drain or fill all the reservoirs with the machine on a flat ground.

The intervals specified here refer to normal operating conditions. During the initial period of use (break-in) and under severe working conditions, the servicing intervals need to be shortened. Consult your New Holland Construction dealer for more information.

Drain the engine oil immediately after shutting off the engine so the oil is warm and flows more easily.

After refilling system at oil change intervals, the oil should be checked only after engine has been run at low idle for a few minutes. This procedure insures that the oil cooler, filters, lines, etc., are completely full before the oil level check is made.

A maintenance and lubrication chart decal is located on the rear og the cab in the lower left corner.