14000 PARTS MANUAL This manual has been prepared for and is considered part of -
This manual is divided into the following groups:
GROUP A – Rotating Structure - includes general arrangement, outline dimensions, operator’s cab, operator’s cab mounting, rotating bed, counterweights, enclosures, platforms, catwalks and steps, air conditioner/ heater, lifting assembly, pin puller , nameplates & decals, MAX-ER®, MAX-ER® wheeled carrier, horns, mirrors. GROUP B – Upperworks Machinery - includes front/rear rotating bed mounted drums, brake and clutch bands, ratchet & pawls, swing drive, boom hoist, drum speed sensors, upperworks hydraulic piping, quick disconnects, hydraulic oil reservoir. GROUP C – Controls, Electrical - includes operator’s cab control consoles, electric control wiring, remote setup switch, auxiliary light plant, upperworks/lowerworks lighting, TV monitoring.
GROUP D – Power Plant - includes power plant, pumps & pump drive, clutch disconnect, radiator mounting and piping, charge air cooling piping, air conditioner, air cleaner, muffler, fuel tank and piping, throttle, battery box, electric wiring for power plant.
GROUP E – Lowerworks - includes carbody, crawlers, crawler drive, adapter frame and swing drives, motor mount, rotating union, lowerworks hydraulic piping, grease piping, and lowerworks platforms.
GROUP F – Attachments - includes boom/jib/luffing jib riggings, sheaves, wire rope guides, mast, drum assemblies mounted in the boom or mast, equalizer, gantry, backhitch, timber guards, boom angle indicator, boom and mast stop, block-up limit, upper and lower boom point, boom lighting, wind speed indicator, load moment indicator, boom hinge/gantry backhitch pin puller and hook and weight ball. O-NUMBER SECTION - includes lacing drawings and purchased component parts drawings referenced in sections A through F.
This manual is arranged in sections as listed above. Each section is arranged in numerical order with an alphabetical index after each section tab. An alphabetical index for Groups A through F and a code number (purchased component) numerical index for the O-number section are located at the back of this manual. The following information is provided after this cover page: • Basic Specifications • Outline Dimensions • Crane Weights • Dealer Listing • Replacement Parts List (Service Interval Kits and Lubrication Reference) NOTICE The serial number of the crane and applicable attachments (i.e. luffing jib) is the only method your Manitowoc distributor or Manitowoc Crane Care has of providing you with correct parts and service information. The serial number is located on a crane identification plate attached to the operator’s cab and each attachment. Refer to the Nameplate and Decal Assembly Drawing in Section 2 of this manual for the exact location of the crane identification plate. Always furnish serial number of crane and its attachments when ordering parts or discussing service problems with your Manitowoc distributor or Manitowoc Crane Care.
©2014 Manitowoc
MANITOWOC CRANES, INC. 2401 South 30th Street · PO Box 70 Manitowoc, WI 54221-0070 Phone: 920-684-6621
14000_PARTS_INSIDE_COVER