FIELD OPERATION ________________________________________________________
THREE POINT HITCH SYSTEM The three point hitch system gives position control and draft control (If equipped) of implements. This tractor is equipped with a category I hitch. The three-point hitch dimensions are shown in the following table. Implement identification Dimensions
Cat I implement
A – Gap In top of implement mast
44.5 mm (1-3/4 inch)
B – Diameter of holes in top of Implement mast
19.1 mm (3/4 inch)
C – Diameter of hitch pins
22.2 mm (7/8 inch)
D – Lower Hitch Pin Inner Shoulder Spread
682.6 mm (26-7/8 Inch)
MAST
HITCH PIN
HITCH PIN
65
16 Series, Model - 2816 HST
