LUBRICATION
LUBRICATION
RELEASE BEARING PADS:
RELEASE BEARING PADS:
Apply a small amount of recommended grease between the release bearing pads and the clutch release fork when lubricating the clutch release bearing.
Apply a small amount of recommended grease between the release bearing pads and the clutch release fork when lubricating the clutch release bearing.
RELEASE BEARING LUBE TUBE (IF EQUIPPED):
RELEASE BEARING LUBE TUBE (IF EQUIPPED):
Lube tubes should be pre-lubed before installation. This is to remove air from the lube tube system to ensure lubricant is delivered to the release bearing during initial installation.
Lube tubes should be pre-lubed before installation. This is to remove air from the lube tube system to ensure lubricant is delivered to the release bearing during initial installation.
Your new MACK truck has been prepared for delivery by your MACK Service Center. After delivery, oil change, filter change, and chassis lubrication intervals become your sole responsibility.
Your new MACK truck has been prepared for delivery by your MACK Service Center. After delivery, oil change, filter change, and chassis lubrication intervals become your sole responsibility.
It is important that components be filled with lubricants meeting the specifications as given in “LUBRICANT SPECIFICATIONS” on page 267.
It is important that components be filled with lubricants meeting the specifications as given in “LUBRICANT SPECIFICATIONS” on page 267.
When checking oil levels, the vehicle must be parked on level ground and the units at normal operating temperature. Components must be filled to the correct level. DO NOT OVERFILL.
When checking oil levels, the vehicle must be parked on level ground and the units at normal operating temperature. Components must be filled to the correct level. DO NOT OVERFILL.
The oil and filter change intervals outlined in this manual pertain to MACK components. For information concerning oil and oil filter change intervals for vendor components, refer to the specific vendor component service literature.
The oil and filter change intervals outlined in this manual pertain to MACK components. For information concerning oil and oil filter change intervals for vendor components, refer to the specific vendor component service literature.
149
149
