INSTRUMENTS AND CONTROLS

Parked Regeneration (If Needed)

Parked regeneration allows the operator start and/or stop the regeneration manually when the vehicle parked and the engine idling. The operator notified that a regeneration needed when the icons the DPF Smart switch illuminate. The operator should perform the regeneration soon possible.

Please refer the instructions below how use the DPF Smart switch for parked

Move the vehicle a safe location, apply the park brake and allow the engine idle.

W Arning

When a r egeneration ocess, the temperatur e the exhaust will elevated. NOT park the vehicle with the exhaust outlet under low hanging overhead flammable objects such ees, awnings, etc., that could damaged elevated exhaust temperatur es. NOT attempt r egenerate inside a garage enclosed the tail pipe attached exhaust ventilation system the hose material may not rated for the high temperatur

Press and hold the top part the DPF Smart switch momentarily initiate the

During regeneration, the icons the switch will shut The HEST indicator the instrument cluster will light notify high exhaust temperatures.

Engine speed will ramp high

Regeneration will take between minutes complete.

After regeneration has completed and the exhaust temperature has returned the HEST indicator will shut

T o stop regeneration, press the switch down the inhibit position. When the bottom the switch illuminated, regeneration stopped. The switch will remain locked this position and the light will stay illuminated. The driver has the option stopping a regeneration the vehicle area where elevated exhaust temperatures will pose a hazard (i.e., tunnel, under trees, area where there flammable material, etc.).