INSTRUMENTS AND CONTROLS

24. DPF Smart Switch (If Equipped) This a three - position switch where the middle position

C0029592 regeneration occurs while the vehicle being driven and automatic (no operator input needed start regeneration) manual (operator input needed start The operator notified that a regeneration needed when the icons the DPF Smart switch illuminate (refer Figure listed

Note: During vehicle idle speed may increase when the vehicle stopped a traf fic light maintain proper Aftertreatment DPF Regeneration conditions. ( M a n u a l M o v i n g ) R e g e n e r a t i o n ( I f A v a i l a b l e )

1 When the icons the DPF Smart switch light up, maintain vehicle speed and press and hold the top part the switch momentarily .

2 During the icons the switch will shut https://www.truck-manuals.net/mack/

3 Regeneration will take between minutes complete.

4 T o stop press the switch down the inhibit When the bottom the switch regeneration The switch will remain locked this position and the light will stay The driver has the option stopping a regeneration the vehicle area where elevated exhaust temperatures will pose a hazard under area where there flammable etc.).