INSTRUMENTS AND CONTROLS

1 Mode Button — Using this button will display diagnostic trouble code information and trip distance the odometer When you press and hold down this the display will through a gauge self After the self test diagnostic trouble code information will the speedometer/odometer When the first MID push the Mode button again display the 1st diagnostic trouble code for this the end the diagnostic trouble code list for each "CLEAR" will Y have the option here clear the codes for this you choose so, press and hold the Mode Once the codes are cleared for this the next MID will pressing this button once (NOT holding down), information for T rip 1 distance will displayed. Press and hold the Mode button clear T rip 1 information. pressing this button twice, information for T rip 2 distance will displayed. Press and hold the Mode button clear T rip 2 information.

12. Hour Meter — Indicates hours engine Hours operation should used a guide for certain engine O maintenance

13. Optional Switch See Optional , page .

14. Hand - Control Brake Lever (If Equipped) — Pull down activate the trailer the rear axle brakes the case a platform

Note: There are only two instances when the feature should used: (1) momentary brake application a stop sign, light, etc., (2) apply the trailer brakes while sliding a 5th

The hand - contr brake system must NOT used for parking. NOT use apply service brakes while vehicle motion. not leave the vehicle while hand - contr brake applied.

15. Optional Switch — See Optional , page

16. Optional Switch — See Optional , page .

17. Air V ent — Rotate the knob open close the air

18. Cab Climate Control Panel — See the CAB CLIMA CONTROL section for more information.

19. Fuel/ DEF Registers the fuel and DEF levels the supply