INSTRUMENTS AND CONTROLS

• Check T ransmission W arning Indicator (If Equipped) Only present vehicles equipped with automatic

• Optional T ell - T ales

• Right - Hand Operation Indicator Indicates that a right - hand drive mode has been enabled.

• Maintenance Due Indicator — Indicates that a maintenance alert has been issued (maintenance due).

• Optional T ell - T ales

• Aftertreatment DPF Regeneration Inhibit Icon — Illuminates when the inhibit switch turned will allow the driver know that the switch a inhibit position and a regeneration will not occur

• Forced Neutral Indicator — Illuminates when O engaged and the truck not moving.

• Fuel Filter Restriction (If Equipped)

• Air Filter Restriction (If Equipped)

• Predictive Oil Change (If Equipped)

• Engine Oil Level Indicator — illuminated, immediately check the level your engine oil.

• W ater Fuel Indicator (If Equipped) Illuminates when water accumulates the primary fuel filter sediment bowl. Stop the engine and drain the fuel from the sediment bowl.

Speedometer/Odometer — Indicates road speed miles and/or kilometers per hour and total distance vehicle has

High Beam Indicator (Blue) — Indicates that high beams are on.

T urn Signal Indicators — Flash green when the turn signals are T ransmission Oil T emperature Gauge (If Equipped) — Indicates transmission oil temperature.

10. V oltmeter Indicates the surface charge the battery with the engine NOT running (and the ignition Indicates the condition charging system with the engine running.

The voltmeter can useful a diagnostic During the reading should not drop below Lower readings may indicate corroded connections the cranking motor battery discharged defective https://www.truck-manuals.net/mack/