1 minute read
Idle Shutdown Override Switch
from Mack Truck Electronic V-MAC IV Vehicle Management & Control with Co-Pilot Display Operator’s Manual
The aftertreatment diesel particulate filter (DPF) smart switch a three - position rocker switch where the position momentary , the MIDDLE position neutral (standby mode) and the DOWN position locked. The switch allows the operator interface with the s exhaust aftertreatment system.
The switch has several functions outlined below .
• Indicates that a aftertreatment DPF regeneration needed has started when the icons the switch are
• Indicates that a regeneration has been stopped when the DOWN position the switch pressed, locked and illuminated.
• Stops a regeneration event when the DOWN position the switch locked and
• Starts aftertreatment DPF manual regeneration event when the switch momentarily pressed the
• Goes into standby mode and waits for regeneration when the switch the MIDDLE position.
C0035425
e DPF Smart Switch
For additional information the Aftertreatment DPF Smart Switch and Regeneration, please refer “EXHAUST AFTER TREA TMENT SYSTEM” , page .
