Liebherr Tractor 3-tooth deep ripper Operator's Manual - PDF DOWNLOAD

en

Operator's manual 3-tooth deep ripper Option

Document ID Order number: Issued: Version: Author:

ORIGINAL OPERATOR'S MANUAL 93517224 01.09.2016 01 LWT I Technical Documentation Department

Product ID Manufacturer: Liebherr-Werk Telfs GmbH Product type: option - 3-tooth deep ripper Valid for (From Serial no.): PR 776-1296

Contact

Liebherr-Werk Telfs GmbH Hans Liebherr-Stral1e 35 A - 6410 Telfs

Machine data: Enter the following information on taking delivery. *You will find the information on the type plate of the machine. This will also be useful when you order spares.

* Vehicle ID number: VAUZ ............................. ZT ............................ .

* Year of manufacture:

Commissioning date: .................. 1 ................. 1 ................ .

copyright© Liebherr-Well< Telfs GmbH 2016

2

llEBHERR

Foreword

This supplement to the standard operating instructions has been written for the machine operator and for the maintenance personnel of the machine. It only contains the description for the installed or attached special equipment and must be read and applied carefully before the initial operation and later in regular intervals.

The supplement to the standard operating instructions belongs with the machine. Make sure that a copy is always readily available in the compartment in the operator's cab. Supplement the operating instructions with instructions of existing national regulations for accident prevention and protection of the environment.

We reserve the right to make changes of technical details on the equipment in comparison to the information and illustrations in this manual.

Note (i) This section only contains the description for the installed or attached special equipment! ►

For detailed descriptions for the entire machine, see "Standard Operating Instructions".

copyright© Liebherr-Werk Telfs GmbH 2016

IIIBHIRR

3

Foreword

Operator's manual

copyright© Liebherr-Well< Telfs GmbH 2016

4

llEBHERR

Contents

1

Control, operation

7

1.1

Operation

7

1.1.1

3-tooth deep ripper

7

1.1.2

Raise and lower the deep ripper

7

1.1.3

Setting the tooth angle

8

Index

9

copyright© Liebherr-Werk Telfs GmbH 2016

llEBHERR

5