Landoll Bendi Forklift 55D MT Full Freelift Triple Mast PARTS MANUAL

P

ARTS MANUAL

This manual contains standard production Product Identification Numbers.

Special Engineered Options not included.

55D MT Full Freelift Triple Mast For PIDs 55D-MT-001 Through Present

FOR PARTS AND SERVICE: TELEPHONE: (800) 423-4320 Manual Number: F-389-0804 1900 North Street · Marysville, KS 66508 · Toll Free (800) 423-4320 · (785) 562-5380 · FAX (785) 562-4892

About This Manual Introduction Prior to calling the parts department, find the Landoll forklift serial number located on the data plate and the mast part number located on the left hand side of the outer upright channel. This number must be used when ordering replacement parts for this product.

MAST PART NUMBER XXX-XX-XXXX

x xx p/n) x xx oll nd a (L

EXAMPLE

MA2380.eps

Ordering Parts Customers Parts and service literature is available through authorized lift truck dealers. To place an order, contact the lift truck dealer of your choice.

Lift Truck Dealers To order parts and service literature contact:

LANDOLL CORPORATION CUSTOMER SERVICE 1900 NORTH STREET MARYSVILLE, KS 66508 TELEPHONE: (800) 423-4320 OR (785) 562-5381 FAX: (785) 562-4892

Contents Introduction ............................................................................................................................................................ 2 Safety Decals ......................................................................................................................................................... 3 Main Lift Cylinder .................................................................................................................................................. 6 Free Lift Cylinder ................................................................................................................................................... 8 Outer Upright ....................................................................................................................................................... 12 Intermediate Upright ........................................................................................................................................... 16 Inner Upright ........................................................................................................................................................ 18 Hoist Chains and Free Lift Hose ......................................................................................................................... 26 Lowering Control Valve ...................................................................................................................................... 30 Load Backrest ...................................................................................................................................................... 31 4 Roller Carriages ................................................................................................................................................ 32 6 Roller Carriages ................................................................................................................................................ 36 Single Function IHR ............................................................................................................................................ 41 Double Function IHR .......................................................................................................................................... 48 Recommended Spare Parts List ......................................................................................................................... 55 Parts Ordering Log .............................................................................................................................................. 56 Landoll Mast P/N Table - 55D Triple ................................................................................................................... 57

Safety Decals

2 - 123430 “NO STEP”

6 - 123435 “HANDS OFF”

123434 1 - 123434 “WARNING”

1 - 123431 “NO STEP”

123433

1 - 123433 “WARNING” 2 - 123432 “FORK STOP”

3

Main Lift Cylinder - 2600 PSI 3 4 5

12 13

6 7 8 1 2

14 15 16 17

9

18

10 11 19

MA2551.eps

4

Main Lift Cylinder - 2600 PSI For PIDS 55D-MT-001 Through 55D-MT-311 HPML-5 OCL HIGH PRESSURE (in)

MAIN LIFT CYLINDER QTY 2

104 133113 109 133114 118 133115 OCL - Outer Channel Length

HPML-6 Item QTY Part # Description 1 1 N/A Shell Assembly 2 1 N/A Plunger 3 1 1417342 Snap Ring 4 1 Wiper 1 5 1 133077 Retainer 6 1 Rod Seal 1 7 1 Backup Ring 1 8 1 O-Ring 1 9 1 133091 Fuse Piston 10 1 133089 Fuse Spring 1 - Included in Seal Kit P/N 133081.

Item 11 12 13 14 15 16 17 18 19

QTY 1 2 2 1 1 1 1 1 1

Part # 133090 133163 132578 133078 133084 1 1 1,2 133264

Description Spring Guide Seal Capscrew Pull Wire Piston Nylon Ring Piston Seal Wear Ring Fitting

5

Main Lift Cylinder - 2600 PSI 18 4 5 6 7 8

1

2 12

3

13 14

9

15

10

16

11 17 MA0862.eps

6

Free Lift Cylinder - 2600 PSI 21

2

5

4

6 7 8 1

14 15

16

17

18

19

13

9

3

20

11 10 12 22

8

MA0863.eps

Free Lift Cylinder - 2600 PSI For PIDS 55D-MT-001 Through 55D-MT-311 HPFL-3 HIGH PRESSURE OCL (in)

FREE LIFT CYLINDER QTY 1 134308 134309 134310 134311

80 84 92 98 104 133110 109 133111 118 133112 OCL - Outer channel Length

HPFL-4 Item QTY Part # Description 1 1 N/A Shell Assembly 2 1 N/A Plunger 3 1 Snap Ring 3 4 1 Rod Wiper 1 5 1 133080 Retainer 6 1 Rod Seal 1 7 1 Backup Ring 1 8 1 O-Ring 1 9 1 Wear Ring 1,2 10 1 133083 Fuse Piston 11 1 133085 Fuse Spring Included in Piston Kit P/N 126286.

1 2 - Included in Seal Kit P/N 133087.

Item QTY Part # Description 12 1 133082 Spring Guide 13 1 Washer 3 14 1 , Pull Wire 1 2 15 1 Piston 3 16 1 Backup Ring 1 17 1 Piston Seal 1 18 1 Check Valve 3 19 1 O-Ring 3 20 1 1417341 Fitting 21 1 1418433 Snap Ring 22 1 133341 Roll Pin Included in check valve kit P/N 126287.

3

9

Free Lift Cylinder - 2600 PSI 21

2

5

4

6 7 8 1

14 15

16

17

18

19

13

9

3

20

11 10 12 22

10

MA0863.eps

Free Lift Cylinder - 2600 PSI For PIDS 55D-MT-312 Through Present HPFL-1 HIGH PRESSURE OCL (in)

FREE LIFT CYLINDER QTY 1 133120 133121 133123 133124

80 84 92 98 104 133125 109 133127 118 133128 OCL - Outer channel Length

HPFL-2 Item QTY Part # Description 1 1 N/A Shell Assembly 2 1 N/A Plunger 3 1 Retainer Ring 3 4 1 Rod Wiper 1 5 1 133080 Retainer Rod Seal 6 1 1 7 1 Backup Ring 1 8 1 O-Ring 1 9 1 , Wear Ring 1 2 10 1 133083 Fuse Piston 11 1 133105 Fuse Spring 1 - Included in Piston Kit P/N 126286.

2 - Included in Seal Kit P/N 133087.

Item QTY Part # Description 12 1 133104 Spring Guide 13 1 Washer 3 14 1 Pull Wire 1,2 15 1 Piston 3 16 1 Backup Ring 1 17 1 Piston Seal 1 18 1 Check Valve 3 19 1 O-Ring 3 20 1 1417341 Fitting 21 1 1418443 Snap Ring 22 1 133341 Roll Pin 3 - Included in check valve kit P/N 126287.

11

Outer Upright 55D-MT-001 Through 55D-MT-763 11 5

OLD STYLE

WEAR PLUG & SHIM

4 NEW STYLE

6

7

WEAR PLUG & SHIM

8 3

9 10

2 12 1

MA2335.eps

12

Outer Upright 55D-MT-001 Through 55D-MT-763 OUTER CPG-1 REF QTY PART # 1 1 1 2 2 23002DX 3 *16 133508 4 132969 21 5 2 1417342 6 2 1417343 * Quantity will vary.

1 - See Outer-1.

DESCRIPTION Outer Upright Load Roller Load Roller Shim Mainlift Cylinder Shim Kit Snap Ring Chain Pin

REF QTY PART # 7 4 132583 8 2 133170 9 2 1417346 10 2 1417347 11 132333 21 12 2 1417349 2 - One kit per mast.

DESCRIPTION Cotter Pin Chain Anchor Cotter Pin Jam Nut Wear Plug Kit Nut

OUTER-1

OCL (IN)

80 84 92 98

OLD *OUTER UPRIGHT

Replacement OUTER UPRIGHT QTY 1

REF 1 134312 134313 134314 134315

REF 1 134316 134317 134318 134319

104 133315 132634 109 133316 132635 118 133317 132636 OCL - Outer Channel Length * - Part numbers are for reference only.

Order part numbers in next column.

13

Outer Upright 55D-MT-764 Through Present 11 5

OLD STYLE

WEAR PLUG & SHIM

4

6

7

9

8

NEW STYLE

WEAR PLUG & SHIM

3 2 13 14 10 12 1

MA2334.eps

14

Outer Upright 55D-MT-764 Through Present OUTER CPG-2 REF QTY PART # 1 1 1 2 2 23002DX 3 *16 133508 4 1 132969 2 5 2 1417342 6 2 1417343 7 4 1417344 * Quantity will vary.

1 - See Outer-2.

DESCRIPTION Outer Upright Load Roller Load Roller Shim Mainlift Cylinder Shim Kit Snap Ring Chain Pin Cotter Pin

REF QTY PART # 8 2 133510 9 2 132628 10 2 1417347 11 1 132333 2 12 2 1417349 13 2 132632 14 2 132631 2 - One kit per mast.

DESCRIPTION Cotter Pin Chain Anchor Jam Nut Wear Plug Kit Nut Bumper (OCL above102") Clamp (OCL above102")

OUTER-2 OUTER UPRIGHT QTY 1 REF 1 80 134316 84 134317 92 134318 98 134319 104 132634 109 132635 118 132636 OCL - Outer Channel Length OCL (IN)

15

Intermediate Upright 55D-MT-001 Through Present

2

9

3

OLD STYLE

WEAR PLUG & SHIM

4

5 6 7

NEW STYLE

WEAR PLUG & SHIM

1

6 MA2336.eps

16

7

8

Intermediate Upright 55D-MT-001 Through Present INTER CPG-1 REF QTY PART # 1 1 1 2 2 1418208 3 2 1418248 4 1 133254 5 2 23019 * Quantity will vary.

1 - See Inter-1.

DESCRIPTION Intermediate Upright M10x1,5x16 Capscrew M10 Lockwasher Chain Sheave Pin Chain Sheave

REF 6 7 8 9

QTY *32 3 1 21

PART # 23003 23002DX 133255 132333

DESCRIPTION Load Roller Shim Load Roller Chain Sheave Pin Wear Plug Kit

2 - One kit per mast.

INTER-1 INTERMEDIATE UPRIGHT QTY 1 REF 1 80 134320 84 134321 92 134322 98 134323 104 133309 109 133310 118 133311 OCL - Outer Channel Length OCL (IN)

17

Inner Upright 55D-MT-001 Through 55D-MT-311

1 4 5 10 3

11

12 17

6 7 8

2

9 10

9

18 12 2 2

2

14 14

19

19 15

MA2557.eps

18

16

Inner Upright 55D-MT-001 Through 55D-MT-311

INNER CPG-1 REF QTY PART # 1 1 1 2 1 132260 3 2 23019 4 2 133253 5 1 133252 6 2 1417944 7 2 133258 8 2 133257 9 4 133168 10 8 1417344 * Quantity will vary.

1 - See Inner-1.

DESCRIPTION Inner Upright FL Cylinder Band Kit Chain Sheave Chain Guard Crosshead Snap Ring M12 Lockwasher M12x1,75x20 Capscrew Chain Pin Cotter Pin

REF 11 12 13 14 15 16 17 18 19

QTY 2 4 2 4 *16 2 2 2 4

PART # 133170 1417346 132582 1417347 23003 23002DX 133259 133256 1417349

DESCRIPTION Chain Anchor Cotter Pin Nut Jam Nut Load Roller Shim Load Roller Insert (High Pressure Only) Chain Anchor Nut

INNER-1

OCL (IN)

OLD *INNER UPRIGHT

INNER UPRIGHT

QTY 1

80 84

REF 1 134324 134325

REF 1 134328 134329

92 98

134326 134327

134330 134331

104 133312 132603 109 133313 132604 118 133314 132605 OCL - Outer Channel Length * - Part numbers are for reference only. Order part numbers in next column.

19

Inner Upright 55D-MT-312 Through 55D-MT-763

1 4 5 10 3

11

12 17

6 7 8

2

9 10

9

18 12 2 2

2

14 14

19

19 15

MA2557.eps

20

16

Inner Upright 55D-MT-312 Through 55D-MT-763 INNER CPG-2 REF QTY PART # 1 1 1 2 1 132260 3 2 23019 4 2 133253 5 1 132601 6 2 1417944 7 2 133258 8 2 133257 9 4 133168 10 8 1417344 * Quantity will vary.

1 - See Inner-2.

DESCRIPTION Inner Upright FL Cylinder Band Kit Chain Sheave Chain Guard Crosshead Snap Ring M12 Lockwasher M12x1,75x20 Capscrew Chain Pin Cotter Pin

REF 11 12 13 14 15 16 17 18 19

QTY 2 4 2 4 *16 2 2 2 4

PART # 133170 1417346 132582 1417347 23003 23002DX 133259 133256 1417349

DESCRIPTION Chain Anchor Cotter Pin Nut Jam Nut Load Roller Shim Load Roller Insert (High Presseure Only) Chain Anchor Nut

INNER-2 OCL (IN)

INNER UPRIGHT

QTY 1 REF 1 80 134328 84 134329 92 134330 98 134331 104 132603 109 132604 118 132605 OCL - Outer Channel Length

21

Inner Upright 55D-MT-764 Through 55D-MT1094

1 4 5

10 11 12

3

17 2

6 9

9 10 7

2 2 2

12 14 14 8 15 16

8

MA2558.eps

22

Inner Upright 55D-MT-764 Through 55D-MT1094 INNER CPG-3 REF QTY PART # 1 1 1 2 2 132260 3 2 23019 4 2 1418443 5 1 132263 6 2 1417944 7 2 133256 8 4 1417349 9 4 133168 * Quantity will vary.

1 - See Inner-3.

DESCRIPTION Inner Upright FL Cylinder Band Kit Chain Sheave Snap Ring Crosshead Kit Snap Ring Chain Anchor Nut Chain Pin

REF 10 11 12 13 14 15 16 17

QTY 8 2 4 2 4 * 2 2

PART # 1417344 133170 1417346 132582 1417347 23003 23002DX 133259

DESCRIPTION Cotter Pin Chain Anchor Cotter Pin Nut Jam Nut Load Roller Shim Load Roller Insert (High Presseure Only)

INNER-3 OCL (IN)

INNER UPRIGHT

QTY 1 REF 1 80 134328 84 134329 92 134330 98 134331 104 132603 109 132604 118 132605 OCL - Outer Channel Length

23

Inner Upright 55D-MT1095 Through Present

1

18

19

20

4

5 3

10 11 13 17 2

6 9

9 10 7 12

2 2

14

2

8

14 8 16 15

24

MA2559.eps

Inner Upright 55D-MT1095 Through Present INNER CPG-4 REF QTY PART # 1 1 1 2 2 132260 3 2 23019 4 2 1418443 5 1 132224 6 2 1417944 7 2 133256 8 4 1417349 9 4 133168 10 8 1417344 * Quantity will vary.

1 - See Inner-5.

DESCRIPTION Inner Upright FL Cylinder Band Kit Chain Sheave Snap Ring Crosshead Kit Snap Ring Chain Anchor Nut Chain Pin Cotter Pin

REF 11 12 13 14 15 16 17 18 19 20

QTY 2 4 2 4 * 2 2 4 4 2

PART # 133170 1417346 132582 1417347 23003 23002DX 133259 1418018 1418019 132228

DESCRIPTION Chain Anchor Cotter Pin Nut Jam Nut Load Roller Shim Load Roller Insert (High Presseure Only) M6x1,0x16 Capscrew M6 Lockwasher Chain Guard

INNER-5 OCL (IN)

INNER UPRIGHT

QTY 1 REF 1 80 134328 84 134329 92 134330 98 134331 104 132603 109 132604 118 132605 OCL - Outer Channel Length

25

Hoist Chains

1

SEE CHN-1

2

MA2339.eps

Free Lift Hose

3 SEE CHN-1

MA2341.eps

26

Hoist Chains and Free Lift Hose 55D-MT-001 Through 55D-MT-311 CHN-1 MAIN LIFT FREE LIFT FREE LIFT CHAIN CHAIN HOSE OCL (in) REF #1 REF #2 REF #3 QTY 2 QTY 1 80 134332 134335 134338 84 133192 133188 134339 92 134333 134336 134340 98 134334 134337 134341 104 133319 133188 133307 109 133320 133189 132597 118 133321 133192 132598 OCL - Outer Channel Length

27

Hoist Chains

1 SEE CHN-2

2

MA0170.eps

Free Lift Hose

3 SEE CHN-2

MA2340.eps

28

Hoist Chains and Free Lift Hose 55D-MT-312 Through Present CHN-2 MAIN LIFT FREE LIFT FREE LIFT CHAIN CHAIN HOSE OCL (in) REF #1 REF #2 REF #3 QTY 2 QTY 1 80 134332 134335 134338 84 133192 133188 134339 92 134333 134336 134340 98 134334 134337 134341 104 133319 133193 133307 109 133320 133195 132597 118 133321 133318 132598 OCL - Outer Channel Length

29

Lowering Control Valve 1

2

3

REF

QTY

PART#

Lowering Control Valve DESCRIPTION

Valve Assembly *134022 *134028 *1418249

1

2000 PSI Lowering Control Valve, 8 GPM 2000 PSI Lowering Control Valve, 24 GPM 2600 PSI Lowering Control Valve, 17 GPM

Valve B ody 2

1

1418250

Valve Body

Valve C artridge 134025 2000 PSI Valve Cartridge, 8 GPM 3 1 1422632 2000 PSI Valve Cartridge, 24 GPM 1418251 2600 PSI Valve Cartridge, 17 GPM * - Valve Assem bly consists of 1 - Valve Body and 1 - Valve Cartridge.

30

Load Backrest 1

Backrest-2.eps

2

LBR-1 ALL Class II Load Backrests REF QTY PART # DESCRIPTION 118161 *Backrest, 31" x 36" 118139 *Backrest, 31" x 48" 118164 *Backrest, 31" x 60" 1 1 116270 *Backrest, 37" x 36" 114842 *Backrest, 37" x 48" 116535 *Backrest, 37" x 60" 2 4 1415032 Capscrew, M16x2,0x35-8.8 * - Item 1 inlcudes items 2.

Other Backrest sizes are available, contact Landoll Corporation for details.

31

4 Roller Carriages 55D-MT-001 Through 55D-MT-311 1 6

7 8

2

3

4

9

5

11

10

MA0442.eps

12 13

Carriage drawing is for reference only, specific carriage may look different.

CARR-1

REF

55D MT 4 Roller Carriages QTY Part # Description

Carriage Weldments 1 1 133260 37" Cushion Carriage ---------------------* - Quantity as needed.

1 - Included in Roller Kit p/n 132877.

REF

Common Parts QTY Part # Description

2 3 4 5 6 7 8 9 10 11 12 13

1 4 133265 1 4 1417958 1 4 1417959 2 1417346 2 1417343 4 1417343 2 133256 1 *16 23003 1 4 23002D 2 1417347 2 1417349 1 1419462

Capscrew Lockwasher Thrust Roller Assembly Cotter Pin Chain Pin Cotter Pin Chain Anchor Load Roller Shim Load Roller Jam Nut Nut Forkstop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

32

4 Roller Carriages 55D-MT-312 Through 55D-MT1094 High Pressure 55D-MT-312 Through Present Low Pressure 1 6

2

3

7 8

4

9

5 11 12

10

MA2342.eps

13

Carriage drawing is for reference only, specific carriage may look different.

CARR-2

REF

55D MT 4 Roller Carriage QTY Part # Description

Carriage Weldments 132606 37" Cushion Carriage ------1 1 ---------------* - Quantity as needed.

1 - Included in Roller Kit p/n 132877.

REF

Common Parts QTY Part # Description

2 3 4 5 6 7 8 9 10 11 12 13

1 4 1417957 1 4 1417958 1 4 1417959 2 1417346 2 1417343 4 1417344 2 133256 1 *16 23003 1 4 23002D 2 1417347 2 1417349 1 1419462

Capscrew Lockwasher Thrust Roller Assembly Cotter Pin Chain Pin Cotter Pin Chain Anchor Load Roller Shim Load Roller Jam Nut Nut Forkstop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

33

4 Roller Carriages 55D-MT1095 Through 55D-MT1528 1 6

2

3

7 8

4

9

5 11 12

10

MA0337.eps

13 Carriage drawing is for reference only, specific carriage may look different.

CARR-3

55D MT 4 Roller Carriages REF QTY Part #

Description

Carriage Weldments 132249 37" Cushion Carriage ------1 1 ---------------* - Quantity as needed.

1 - Included in Roller Kit p/n 132877.

Common Parts REF QTY Part #

Description

14 14 14 2 2 4 2 1 *16 14 2 2 1

Capscrew Lockwasher Thrust Roller Assembly Cotter Pin Chain Pin Cotter Pin Chain Anchor Load Roller Shim Load Roller Jam Nut Nut Forkstop Kit

2 3 4 5 6 7 8 9 10 11 12 13

1417957 1417958 1417959 1417346 1417343 1417344 133256 23003 23002DX 1417347 1417349 1419462

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

34

4 Roller Carriages 55D-MT1529 Through Present

A 2

1

8

10

3

11

9

4 7

6 5

CARR-4

55D MT 4 Roller Carriages REF

QTY Part #

Description

MA0737.eps

Common Parts REF

QTY Part #

11Description

12 High Pressure Carriage Weldments 1 1 4 1417957 Capscrew 132890 37" Hi-Vis Cushion Carriage 2 1 4 1417958 Lockwasher ---3 1 4 1417959 Thrust Roller Assembly Carriage drawing is for reference A 1 ---4 only, 2 specific 1417346 carriage Cotter Pinmay look different.

---5 2 1417349 Nut, Hex full ---6 2 1417347 Nut, Hex Jam ---7 2 133170 Chain Anchor * - Quantity as needed.

8 4 1417344 Cotter Pin 9 2 1417343 Pin 1 - Included in Roller Kit p/n 132877.

10 *16 23003 Shim 1 11 4 23002DX Roller Assembly 1 12 1 1419462 Forkstop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

35

6 Roller Carriages 55D-MT-001 Through 55D-MT-311 1 6

7 8

2

3

9

4

5

13

10

9

11

12

MA0441.eps

14 15

Carriage drawing is for reference only, specific carriage may look different.

CARR-5

55D MT 6 Roller Carriages REF

QTY

Part #

Description

CARRIAGE WELDMENTS 133266 37" Cushion Carriage ------1 1 ---------------* - Quantity as needed.

1 - Included in Roller Kit p/n 132876.

Common Parts REF

QTY

Part #

Description

2 3 4 5 6 7 8 9 10 11 12 13 14 15

14 14 14 2 2 4 2 1 *24 16 12 14 2 2 1

133264 1417958 1417959 1417346 1417343 1417344 133256 23003 23002DX 23005 1417962 1417347 1417349 1419462

Capscrew Lockwasher Thrust Roller Assembly Cotter Pin Chain Pin Cotter Pin Chain Anchor Load Roller Shim Load Roller Retainer Plate Capscrew Jam Nut Nut Fork Stop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

36

6 Roller Carriages 55D-MT-312 Through 55D-MT1094 1 6

2

3

7

8 9

4

10 11

12

15

5 13 14

MA0375.eps

16 Carriage drawing is for reference only, specific carriage may look different.

CARR-6

REF

55D MT 6 Roller Carriages QTY Part # Description

CARRIAGE WELDMENTS 132607 37" Cushion Carriage ------1 1 ---------------* - Quantity as needed.

1 - Included in Roller Kit p/n 132879.

REF

QTY

Common Parts Part # Description

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

14 14 14 2 2 4 2 1 *24 16 12 14 2 2 12 1

1417957 1417958 1417959 1417346 1417343 1417344 133256 23003 23002DX 23005 1417962 1417347 1417349 23115 1419462

Capscrew Lockwasher Thrust Roller Assembly Cotter Pin Chain Pin Cotter Pin Chain Anchor Load Roller Shim Load Roller Retainer Plate Capscrew Jam Nut Nut Load Roller Fork Stop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

37

6 Roller Carriages 55D-MT1095 Through Present 1 6

2

3

7

8

9

4

10 11

12

15

5

13

14

MA2343.eps

16 Carriage drawing is for reference only, specific carriage may look different.

CARR-7

55D MT 6 Roller Carriages REF

QTY

Part #

Description

CARRIAGE WELDMENTS 132882 31" Cushion Carriage 132251 37" Cushion Carriage ---------1 1 ------------------* - Quantity as needed.

1 - Included on Roller Kit p/n 132876.

Common Parts REF

QTY

Part #

Description

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

14 14 14 2 2 4 2 1 *24 16 12 14 2 2 12 1

1417957 1417958 1417959 1417346 1417343 1417344 133256 23003 23002DX 23005 1417962 1417347 1417349 23115 1419462

Capscrew Lockwasher Thrust Roller Assembly Cotter Pin Chain Pin Cotter Pin Chain Anchor Load Roller Shim Load Roller Retainer Plate Capscrew Jam Nut Nut Load Roller Fork Stop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

38

6 Roller Carriages 55D-MT1529 Through Present

A 10 2

1

8

11

3

14

13

9

4 7

6 5

CARR-8

55D MT 6 Roller Carriages REF QTY Part #

Description

Common Parts REF QTY

Part #

11

12 Description

MA0738.eps

15

1 Capscrew HIGH PRESSURE CARRIAGE WELDMENTS 1 4 1417957 132891 37" Hi-Vis Cushion Carriage 2 4 1417958 Lockwasher 1 A 1 ---3 4 1417959 Thrust Roller Assembly 1 Carriage drawing is for reference only, specific carriage may look different.

---4 2 1417344 Cotter Pin ---5 2 1417349 Nut, Hex full * - Quantity as needed.

6 2 1417347 Nut, Hex Jam 7 2 133170 Chain Anchor 1 - Inluded in Roller Kit p/n 132876.

8 4 1417344 Cotter Pin 9 2 1417343 Pin 10 23003 Shim 1 *24 11 1 4 23002DX Roller Assembly 12 23115 Roller Assembly 12 13 Capscrew 1 4 1417962 14 23005 Retainer Plate 12 15 1 1419462 Fork Stop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

39

6 Roller Carriages 55D-MT1529 Through Present 1 6

2

3

7

8

9

4

10 11

12

15

5

13

14

MA2349.eps

10

16

Carriage drawing is for reference only, specific carriage may look different.

CARR-9

55D MT 6 Roller Carriages REF QTY Part #

Description

CARRIAGE WELDMENTS 132971 37" High Pressure Cushion ---1 1 ------------* - Quantity as needed.

1 - Included in Roller Kit p/n 132876.

Common Parts REF

QTY

Part #

Description

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

14 14 14 2 2 4 2 1 *24 14 12 14 2 2 12 1

1417957 1417958 1417959 1417346 1417343 1417344 133170 23003 23002DX 23005 1417962 1417347 1417349 23115 1419462

Capscrew Lockwasher Thrust Roller Assembly Cotter Pin Pin Cotter Pin Chain Anchor Shim Roller Assembly Retainer Plate Capscrew Nut, Hex Jam Nut, Hex full Roller Assembly Fork Stop Kit

Contact Landoll Customer Service if your carriage does not match any of those listed (Mast PID number needed).

40

High Pressure Internal Hose Reeving Single Function 55D-MT-001 Through 55D-MT-311 For illustration purposes only - Use Charts on Page 45 for ordering

14

2

3

4

5

6 5

4

3

12

2

13 7 8

1

9

6

11

10 MA0440.eps

41

High Pressure Internal Hose Reeving For 55D-MT-312 Through 55D-MT1094

Low Pressure Internal Hose Reeving For 55D-MT-312 Through Present

14

2

3

4

5

Note: For 55D-MT-001 Through 55D-MT-311 High Pressure Units, crosshead conversion kit p/n 132263 must be ordered for new installations.

3

6 5

4

12 15

2

13 7 8 9

1

16

6

11

10

Note: Both Single and Double Function IHR are Illustrated.

Single Function is Installed on the Right Hand Side Only.

42

MA0383.eps

High Pressure Internal Hose Reeving For 55D-MT-312 Through 55D-MT1094

Low Pressure Internal Hose Reeving For 55D-MT-312 Through Present IHR-5

REF

QTY SINGLE DOUBLE

IHR COMMON PARTS COMMON PARTS GROUP: PART # 134382 QTY PART # DESCRIPTION REF SINGLE DOUBLE 132576 Layout Drawing 9 2 4 n Hose Sheave 10 1 2 133169 Hose Sheave 11 1 2 133275 Shaft 12 1 2 133258 Lockwasher, M12 13 1 2 133274 Capscrew, M12x60 14 1 2 1417986 Fitting, 6-6 15 1 2 133276 Bracket 16 4 8 1418248 Lockwasher, M10

1 2 4 2 2 4 3 2 4 4 2 4 5 2 4 6 3 6 7 1 2 8 2 4 n - See Chart Below.

For field installation - field kit p/n 132207 is required.

PART #

DESCRIPTION

1418247 132574 1418006 133261 1418243 1418002 132206 132586

Capscrew, M10x25 Fitting, 6-6 Fitting, 6-6 Bracket Nut, M10 Washer Hose Guard Cap

ihr-6 IHR KIT and HOSE PART NUMBERS HOSE QUANTITY: SINGLE IHR - 2 DOUBLE IHR - 4 CUSHION (in) IHR KIT - QTY 1 HOSE 80 134342 126097 84 134343 125124 92 134344 134346 98 134345 134347 104 133327 133232 109 133328 133236 118 133329 133242 OCL - Outer Channel Length.

43

High Pressure Internal Hose Reeving Single Function 55D-MT1095 Through 55D-MT2338 4 2 24

6

11

20

18

26 27 17 22 25

23 26

5

10

19 21

3

27 10

11

7 8

10 11 12 10 8

16 1

28

8 15

10 11

44

14

MA0367.eps

13 7

9

High Pressure Internal Hose Reeving Single Function 55D-MT1095 Through 55D-MT2338 ITEMS LISTED BELOW ARE FOR REPLACEMENT PARTS ORDERING ONLY FOR COMPLETE KITS AND HOSES, ORDER PART NUMBERS LISTED ON PAGE 47.

ihr-s -4004 RE F 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Q TY 2 2 2 2 2 3 6 2 9 7 2 1 1 1

P A RT # 127568 132233 1418002 133258 1417957 1417986 1418247 133261 1418248 133345 133276 132574 1418006 132230

C O M M O N P A R TS D E S C R IP TIO N R E F Q TY P A R T # D E S C R IP TIO N H os e S heave 16 1 133167 S egm ent S haft 17 1 132229 Chain G uard W as her 18 2 132500 Caps c rew, M 10x 1,5x 45-8.8 Loc k w as her, M 12 19 1 132219 Caps c rew, M 10x 1,5x 65-8.8 C aps c rew , M 12x 1,75x 45-8.8 20 2 132227 G uard F itting, 6-6 21 2 127566 Tire C aps c rew , M 10x 1,5x 25-8.8 22 4 127567 Tire B rac k et 23 1 132226 Chain G uard Loc k w as her, M 10 24 2 132247 S haft N ut, M 10 25 4 132232 S haft B rac k et 26 4 206321 Caps c rew, M 6x 1x 16-8.8 F itting, 6-6 27 4 1418019 Loc k w as her, M 6 F itting, 6-6 28 2 132235 Clip B rac k et

45

High Pressure Internal Hose Reeving Single Function 55D-MT2339 Through Present 3

4

20

21

22

5

7

23

6 1

-

2 7 A

8

A

12 11 10 16

Notes: 1. Items “A” are originally installed on the mast and should be reused.

2. Items 1 though 8 can be ordered in kit p/n 132419.

15 13

9

B

16 11

14

11 17

For Single to Double IHR conversion use hardware conversion kit 16 p/n 132264. IHR hoses must be ordered separately. 15

18 19 25

46

MA0518.eps

12

High Pressure Internal Hose Reeving Single Function 55D-MT2339 Through Present IHR-1

REF QTY PART # 132587 1 1 132408 2 1 132229 3 2 1419447 4 2 1419448 5 2 132389 6 1 1419450 7 3 133258 8 1 1419452 9 2 133276 10 2 133261 11 6 1418247 12 3 1417986

HIGH PRESSURE SINGLE IHR COMMON PARTS COMMON PARTS GROUP: PART # 134384 DESCRIPTION REF QTY PART # DESCRIPTION Layout Drawing 13 1 133167 Segment IHR Bracket 14 2 132235 IHR Clip Chain Guard 15 4 1418243 Nut, M10 IHR Sheave 16 6 1417274 Lockwasher, M10 Stubshaft, single func.

17 1 132230 Bracket IHR & Chain Guard 18 1 1418006 Bulkhead Union 90 deg Capscrew, M12x65 long 19 1 132574 Fitting Lockwasher, M12 20 2 127568 Sheave Nut, M12 21 2 132233 Shaft IHR Bracket 22 2 1418002 W asher, 0.5ID, 1.5OD Bracket 23 2 1417957 Capscrew, M12x45 Capscrew, Hex head 24 1 132261 Installation Instructions Fitting, Bulkhead Union 25 2 1419457 Cap

IHR-2 HIGH PRESSURE SINGLE IHR KIT and HOSE PART NUMBERS CUSHION IHR KIT HOSE QTY 1 QTY 2 80 134348 133223 84 134349 127577 92 134350 133226 98 134351 134352 104 132853 133233 109 132854 133237 118 132855 133243 OCL - Outer Channel Length OCL

47

High Pressure Internal Hose Reeving Double Function 55D-MT1095 Through 55D-MT2338 3 32 24

6

11

20

27

23 26

5

10

19 21 18

4

26

17 22 25

27 10

7

11

8 9 10

28

11

29

12 16

30 5 31

10 8

B C

8 15

14

10 11 13

7

13

MA0366.eps

7

48

14

High Pressure Internal Hose Reeving Double Function 55D-MT1095 Through 55D-MT2338 ITEMS LISTED BELOW ARE FOR REPLACEMENT PARTS ORDERING ONLY FOR COMPLETE KITS AND HOSES, ORDER PART NUMBERS LISTED ON PAGE 51.

ihr-s -4005 RE F 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

QTY 2 2 2 2 3 6 2 9 7 2 1 1 1 1 1

P A RT # 133275 127571 133258 132633 1417986 1418247 133261 1418248 133345 133276 132574 1418006 132230 133167 132229

COM M ON P A RTS RE F Q TY P A RT # DE S CRIP TION S haft 18 2 132500 Caps c rew, M 10x 1,5x 45-8.8 S pac er 19 1 132219 Caps c rew, M 10x 1,5x 65-8.8 Loc kwas her, M 12 20 2 132227 Guard Caps crew, M 12x 1,75x 45-8.8 21 2 127566 Tire Fitting, 6-6 22 4 127567 Tire Caps crew, M 10x 1,5x25-8.8 23 1 132226 Chain Guard B rac k et 24 2 132247 S haft Loc kwas her, M 10 25 4 132232 S haft Nut, M 10 26 4 206321 Caps c rew, M 6x1x 16-8.8 B rac k et 27 4 1418019 Loc k was her, M 6 Fitting, 6-6 28 2 132233 S haft Fitting, 6-6 29 2 127568 Hos e S heave B rac k et 30 2 132234 Hos e Guard S egm ent 31 2 1417957 Caps c rew, M 12x 1,5x 45-8.8 Chain G uard 32 2 133169 Hos e S heave DE S CRIP TIO N

49

High Pressure Internal Hose Reeving Double Function 55D-MT2339 Through Present 3

4

24

25

11

7

23

5

6 1 2 7 A

8

A

16 15 14

9

19 10

18 11

13 7

17 12

Notes: 1. Items “A” are originally installed on the mast and should be reused.

19

B

15

C

15 20 26

21

19

18

26

22

16

MA0580.eps

22

7

21

26

50

26

High Pressure Internal Hose Reeving Double Function 55D-MT2339 Through Present IHR-3

REF QTY PART # 133250 1 1 132408 2 1 132229 3 2 1419447 4 2 1419448 5 2 132389 6 1 1419450 7 5 1419451 8 1 1419452 9 2 132233 10 2 127568 11 4 1418002 12 2 1417957 13 2 133276

HIGH PRESSURE DOUBLE IHR COMMON PARTS COMMON PARTS GROUP: PART # 134383 DESCRIPTION REF QTY PART # DESCRIPTION Layout Drawing 14 2 133261 Bracket IHR Bracket 15 6 1418247 Capscrew, Hex Head Chain Guard 16 6 1417986 Fitting, Bulkhead Union IHR Sheave 17 1 133167 Segment Stubshart, Single Func.

18 4 1418243 Nut, M10 IHR & Chain Guard 19 6 1417274 Lockwasher, M10 Capscrew, M12x65 long 20 1 132230 Bracket Lockwasher, M12 21 2 1418006 Bulkhead Union, 90 deg Nut, M12 22 2 132574 Fitting Shaft 23 2 132633 Capscrew, M12x60 Sheave 24 2 133275 Shaft Washer, 0.5ID 1.5OD 25 2 133169 IHR Sheave Capscrew, M12x45 26 4 1419457 Nut, #6 cap IHR Bracket 27 1 132261 Installation Instructions

IHR-4-2 HIGH PRESSURE DOUBLE IHR KIT and HOSE PART NUMBERS CUSHION OCL HOSE IHR KIT (IN) REF B REF C QTY 2 QTY 1 80 134353 133223 134357 84 134354 127577 133224 92 134355 133226 134358 98 134356 134352 134359 104 132856 133233 133231 109 132857 133237 133235 118 132858 133243 133239 OCL - Outer Channel Length

51

High Pressure Internal Hose Reeving Single Function - Cold Storage 55D-MT2339 Through Present ihr-5a OCL IHR KIT PART NO. (in) CUSHION 80 134360 92 134361 98 134362 104 132859 OCL - Outer Channel Length.

HOSE PART NO. QTY 2 Each 134363 134364 134365 133246

NOTE: Refer to page 46 and 47 for common parts and assembly information.

52

High Pressure Internal Hose Reeving Double Function - Cold Storage 55D-MT2339 Through Present ihr-6a OCL (in)

IHR KIT PART NO. CUSHION

80

134366

92

134367

98

134368

104

132863

HOSE PART NO. QTY 2 Each 134363 134369 134364 134370 134365 134371 133246 133245

OCL - Outer Channel Length.

NOTE: Refer to page 50 and 51 for common parts and assembly information.

53

Extra High Pressure Internal Hose Reeving Single Function 55D-MT2339 Through Present IHR-7 OCL (in)

HOSE P/N QTY 2 80 134372 134376 84 134373 134377 92 134374 134378 98 134375 134379 104 133007 133010 109 133008 133011 118 133009 133012 OCL - Outer Channel Length.

IHR KIT P/N

NOTE: Refer to page 46 and 47 for common parts and assembly information.

54