KUBOTA Tractor BX24 Mower RCK60B-23BX RCK54P-23BX RCK54-23BX Front Loader LA240 BT601 Shop Manual P

WORKSHOP MANUAL

TRACTOR,FRONT LOADER, BACKHOE,ROTARY MOWER BX24,LA240,BT601,RCK54, RCK54P,RCK60B

KiSC issued 08 , 2019 A

TO THE READER This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism , service and maintenance of KUBOTA Tractor BX24, KUBOTA Rotary Mower RCK60B-23BX, RCK54P-23BX, RCK54-23BX, KUBOTA Front Loader LA240 and KUBOTA Backhoe BT601 . It is divided into three parts , "General", "Mechanism " and "Servicing" for each section .

■

General Information on the tractor identification , th e general precautions , maintenance check list, check and maintenance and spec ial tools are described.

■

Mechanism Information on the construction and function are included. This part should be understood before proceeding with troubleshooting , disassembling and servicing .

Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9789701873 I 97897-18200) for the one which has not been described to this workshop manual.

■

Servicing Information on the troubleshooting , servicing specification lists, tightening torque , checking and adjusting , disassembling and assembling and servicing which cover procedures, precautions, factory specifications and allowable limits.

All information illustrations and specifications contained in this manual are based on the latest product information available at the time of publ ication .

The right is reserved to make changes in all information at any time without notice.

December 2005

© KUBOTA Corporation 2005

KiSC issued 08, 20 19 A

GENERAL

CONTENTS 1. TRACTOR IDENTIFICATION ........ .. .. .. ...... .... .. .................. ... .... ...... .. .. ............ G-1 2. GENERAL PRECAUTIONS .... .. ....... .. ... ............. .. .......... .. .................. ..... .. ...... G-2 3. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING .. G-3 (1] WIRING ...... .... ........ .. .... ... ... .. .. ... .... ....... ... ....... ....... .. ...................... ....... ...... G-3 [2] BATTERY ....... .. ... ............................ ............... ...... .............................. .. ...... G-5 [3] FUSE ..... ..... .......... .... ... .. ....... ........ .. ...... .. ..... ... ....... .. ....... ........ ... ......... ... .. ... G-5 [4] CONNECTOR .... .... ....... ....... .... ......... .... ... ....... .... .......... .......... .. .... .... ......... G-5 [5] HANDLING OF CIRCUIT TESTER .. .. .. ... .... ..... .. ...... .. ................ .... ... ... ... G-6 4. LUBRICANTS FUEL AND COOLANT .... .. ...... .. ....... ..... .. .. .. ... ............ ........... G-7 5. TIGHTENING TORQUES ...................................................... .... .... .. ... ............ G-8 (1] GENERAL USE SCREWS , BOLTS AND NUTS ..... ...... ... ......... ......... .. . G-8 (2] STUD BOLTS ...... .... .... .. .......... ..... ........... .. .... ....... .. ....................... .... .. ...... G-8 (3] AMERICAN STANDARD SCREWS , BOLTS AND NUTS WITH UNG OR UNF THREADS .................. .................. .... ... ................................... ... G-9 [4] PLUGS ........ .. ................... .. .. ....... .. ...... ... ......... ........ .. ...... ....... ....... .... ........ . G-9 6. MAINTENANCE CHECK LIST .......... ....... ...... ..... ..... .. ...... ... .... ... ....... ... ..... .. . G-10 7. CHECK AND MAINTENANCE .. ............. .. .......... ... .... .. ... ..... ..... ............. ....... G-11 [1] DAILY CHECK .. .. ........ .. ... ... .. ..... .. .. ... .. .. ... ... ........ .. ....... ..... .... ...... ....... .. .. . G-11 [2] CHECK POINTS OF INITIAL 50 HOURS ..... ... ..... ... .... ..... .... .. ..... ... .... G-12 (3] CHECK POINTS OF EVERY 50 HOURS .. ... ... ... .... .. .... ... .. ..... .. ..... ... .. G-14 (4] CHECK POINTS OF EVERY 100 HOURS .......... .. ....... ..... .... .. ... .... .. .. G-16 [5] CHECK POINTS OF EVERY 200 HOURS ......... ... ... ........ ..... ..... .. ..... . G-22 (6] CHECK POINTS OF EVERY 300 HOURS .... .... ...... ....... ....... .. ......... .. G-24 [7] CHECK POINT OF EVERY 400 HOURS ........ .. ........ ....... .. ... .... ... .. .... G-25 [8] CHECK POINT OF EVERY 500 HOURS .. ...... ... .... ........ .... ... ....... ...... G-25 (9] CHECK POINT OF EVERY 800 HOURS .. ..... .. .. .... .. .... ... ....... .......... .. G-26 (1 0]CHECK POINT OF EVERY 1500 HOURS ..... ........ ........ .... .......... ...... G-26 [11]CHECK POINT OF EVERY 3000 HOURS .... ........... ....... ................. .. G-26 [12]CHECK POINT OF EVERY 1 YEAR ...... .. .. ... .. .. ...... ............ .. .. ... ....... .. G-26 [13]CHECK POINTS OF EVERY 2 YEARS ... .. ..... ..... .... ...... .. ....... .. ..... ... .. G-26 [14]OTHERS ... .. ...... ... .... ..... .. ..... .. .. .. ... ....... .. ...... .. ..... .. .. ....... ...... ............ .. ..... . G-30 8. SPECIAL TOOLS ......... ..... ... ... ... ....... .. ......... ..... .. ...... ... ....... ..... .. ... .. ......... ... .. G-32 [1] SPECIAL TOOLS FOR ENGINE .. .. .. .. ........ ...... .. ...... .... ... ... .... ... ....... .... G-32 [2] SPECIAL TOOLS FOR TRACTOR .. ....... .... ....... ........ ...... ..... ..... ........ ... G-37 9. TIRES ... ........ ... .... ......... .. .... .... .... ..... ...... ........ .. ... .... .... .. ........... ...... ... .... .. .. .. .... G-41 [1] TIRE PRESSURE ... ....... ... .. .. ....... ........... .. ..... ...... .. ..... ....... .. .. ..... .. ........ .. G-41 [2] WHEEL TREAD .. .. .. ... .. ............... .. ......... ............ .. .. ...... ................ ........ .. . G-42 [3] BALLAST .. ....... .. .. ........ ... ............. ... .... ... .. .... ... ..... ... ...... ..... ....... ... ...... .... .. G-43 (1) Front Ballast .... ...... ......... .. ............... ..... ... ...... ..... .... .... ............... ...... ... G-43 (2) Rear Ballast ........ ... ........ .. ........ ..... ... .... ... ....... .... ..... ... ..... .. ..... ... ......... G-44 10. IMPLEMENT LIMITATIONS .. ... .. ....... .......... .. .. .. .. .... .... ...... ....... ....... ..... ........ . G-45

KiSC issued 08, 2019 A