Komatsu HD785-7 Dump Truck Field Assembly Instruction Manual - PDF DOWNLOAD

GEN00119-01

Field Assembly Instruction

DUMP TRUCK

HD785 -7 SERIAL NUMBERS

30001

and up

CONTENTS 1. Outline of division (Only main components)................................................................................................. 1 2. Dimensions of main components ................................................................................................................. 2 3. Layout of work space ................................................................................................................................... 3 4. Rough schedule of assembly and welding ................................................................................................... 4 5. List of jigs, tools, and consumables for field assembling............................................................................. 9

CONTENTS 6. Assembly process No. No. Item 0010 Oil, grease, and coolant 0020 Levels of oil, grease, and coolant 0030 Positioning rear axle assembly 0040 Slinging and moving of bare machine 0050 Connection of rod and rear suspension 0060 Positioning bare machine 0070 Connection of rear axle cooling hose 0080 Connection of rear axle brake hose 0085 Connection of rear axle brake hose (ASR specification: If equipped) 0086 Connection of valve sub-assembly wiring harness (ASR specification: If equipped) 0087 Connection and fixing of piping going to rear axle (Sand terrain/ASR specification: If equipped) 0090 Connection and fixing of rear grease piping and supply of grease 0100 Preparation for installing front axle 0110 Installation of front axle 0120 Connection of front axle suspension pressure sensor 0125 Connection of front axle wheel speed sensor (ABS specification: If equipped) 0130 Connection of steering cylinder and tie rod 0140 Connection of front axle brake cooling hoses 0150 Connection of front axle brake hoses 0160 Connection of front axle auto suspension piping 0165 Fixing of front axle auto suspension piping 0166 Fixing of front axle auto grease piping (If equipped: Auto grease specification) 0167 Connection of left front axle auto grease piping (If equipped: Auto grease specification) 0168 Connection of right front axle auto grease piping (If equipped: Auto grease specification) 0170 Installation of bumper and front axle steps 0171 Installation of front axle step (EU specification) 0173 Installation of front axle step 0174 Installation of front axle step: Diagonal ladder specification (If equipped) 0180 Installation of tire and wheel assembly 0190 Installation of drive shaft 0200 Installation of oil quick charge box (If equipped: Oil quick charge specification) 0260 Installation of fuel tank wiring harness cover 0270 Installation of toolbox and tool kit 0275 Installation of fuel tank step (If equipped) 0280 Installation of rear support 0281 Installation of rear support (Muffler specification: If equipped) 0282 Installation of rear support (ABS specification: If equipped) 0283 Installation of rear support (Sand terrain specification: If equipped) 0290 Installation of muffler 0291 Installation of muffler (Body heating-less/Exhaust selector box specification: If equipped) 0300 Installation of fire prevention cover 0310 Installation of front support 0315 Installation of front support (Fog lamp specification: If equipped) 0317 Installation of front support (Fog lamp, beacon lamp, HID headlamp specification: If equipped) 0320 Installation of steering valve 0330 Preparation for installing cab 0340 Installation of cab 0345 Connection of ABS piping (If equipped) 0350 Connection of column 0355 Installation of washer tank 0370 Connection of cab wiring 0375 Connection of cab wiring (ASR/ABS specification: If equipped) 0376 Connection of engine prelubrication harness to cab (If equipped: Engine prelubrication specification) 0377 Connection and fixing of engine compartment lamp wiring harness (If equipped) 0378 Connection of auto grease harness to cab (If equipped: Auto grease specification)

Page 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70

CONTENTS No. 0379 0380 0385 0390 0395 0400 0405 0406 0410 0415 0420 0430 0440 0445 0451 0470 0472 0475 0476 0481 0482 0483 0484 0485 0489 0491 0500 0511 0520 0530 0540 0550 0555 0560 0565 0570 0580 0581 0590 0595 0597 0598 0600 0610 0620 0630 0640 0650 0660 0670 0680 0685 0700 0710 0720 0730 0740

Item Connection of engine stop harness to cab (If equipped: Engine emergency stop specification) Installation and fixing of steering hoses Fixing of air conditioner drain hose Installation of steering hose cover Connection of air conditioner and heater hoses Connection of cab floor wiring Fixing of ASR/ABS wiring harness (If equipped) Connection and fixing of ABS wiring harness (ABS specification: If equipped) Installation of cover under cab Wiring of front glass with heater wire (If equipped) Installation of cab seal Installation of ambient temperature sensor wiring harness Installation of undercab wiring harness connector Connection and fixing of rear view camera wiring harness (if equipped) Installation of hand rail and mirror to the R.H. platform assembly Installation of right fender Installation of right fender (If equipped: Body heating-less muffler specification) Installation of fuel tank quick charge-less hose (If equipped) Installation of fuel tank quick chargeless hose: Muffler specification (If equipped: muffler specification) Assembly of diagonal ladder (if equipped) Installation of cab step: Diagonal ladder specification (if equipped) Installation of diagonal ladder 1 (if equipped) Installation of diagonal ladder 2 (if equipped) Installation of diagonal ladder 3 (if equipped) Installation of cab step Installation of L.H. under view mirror (If equipped) Installation of fire extinguisher (If equipped) Installing radio antenna and fixing its cable Installation of L.H. fender Installation of left side mudguard Installation of grille guard Installation of left payload lamp (If equipped) Installation of left side lamp (If equipped) Installation of right payload lamp (If equipped) Installation of right side lamp (If equipped) Installation of left fender side lamp wiring harness (If equipped) Installation of right fender side lamp wiring harness (If equipped) Installation of right fender side lamp wiring harness (If equipped: Body heating-less muffler, exhaust gas selector box muffler specification) Installation of KOMTRAX (If equipped) Fixing of ORBCOMM antenna (If equipped) Connection and fixing of harness and hose going to auto grease pump - 1 (If equipped: Auto grease specification) Connection and fixing of harness and hose going to auto grease pump - 2 (If equipped: Auto grease specification)

Removal of hoist cylinder fixing bracket Connection of hoist cylinder piping Welding of body Sticking of body decal Supply of oil Slinging of body Installation of hinge pin Connecting hoist cylinder Hoist cylinder grease piping Fixing of auto grease piping to body (If equipped: Auto grease specification) Installation of field welding protection cover Installation of body mount Procedure for adjusting body mount shim Field welding of exhaust tube Assembly of body heater cover

Page 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127

CONTENTS No. 0770 0780 0790 0800 0810 0830 0850 0860 0870 0880 0900 0901 0905 0910 0920 0930 0950 0960 1000 1020-1 1020-2 1100 1200 1300 1400 1410 1420 1430 1440 1450 1460 1470 1480 1490 1500 1510 1520 1530 1540 1550 1560 1570 1580 1590 1600 1610

Item Installation of poke ejector Installation of poke ejector storage pin Installation of body mudguard Installation of body lock pin Installation of transmission underguard Installation of front handle Connection of dump sensor Procedure for adjusting dump sensor Calibrating dump control Adjustment of optical axis of light Bleeding air from brake Bleeding air from brake of ASR specification (ASR specification: If equipped) Bleeding air from ABS circuit (ABS specification: If equipped) Adjusting suspension Charging air conditioner with refrigerant Fitting of floating seal Painting Touchup Sticking of front axle decal Operating procedure of prelubrication system (If equipped: Engine prelubrication specification) Operating procedure of prelubrication system (If equipped: Engine prelubrication specification) Installation of chocks (If equipped) Installation of radiator curtain (If equipped) Installation and connection of beacon lamp (If equipped: Yellow beacon lamp specification) Assembly of power ladder step -1 (If equipped) Assembly of power ladder step -2 (If equipped) Assembly of power ladder step -3 (If equipped) Assembly of power ladder main part -1 (If equipped) Assembly of power ladder main part -2 (If equipped) Assembly of power ladder main part -3 (If equipped) Assembly of power ladder main part -4 (If equipped) Assembly of power ladder main part -5 (If equipped) Assembly of power ladder main part -6 (If equipped) Assembly of power ladder main part -7 (If equipped) Assembly of power ladder main part -8 (If equipped) Assembly of power ladder main part -9 (If equipped) Assembly of power ladder main part -10 (If equipped) Assembly of power ladder main part -11 (If equipped) Assembly of power ladder main part -12 (If equipped) Assembly of power ladder main part -13 (If equipped) Assembly of power ladder main part -14 (If equipped) Assembly of power ladder main part -15 (If equipped) Assembly of power ladder main part -16 (If equipped) Refilling power ladder with oil Adjustment of power ladder operating time Installation of additional under view mirror

Page 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173

CONTENTS 7. Adjustment procedure No. Item T-0010 Bleeding air from fuel circuit 1 (If equipped: Extra low-grade fuel specification) T-0020 Bleeding air from fuel circuit 2 (If equipped: Extra low-grade fuel specification) T-0030 Setting of machine monitor T-0040 Selection of machine model T-0050 Selection of optional component T-0060 Selection of option T-0070 Option setting/no-setting selection screen - Saving of change of option selection T-0080 OFF setting of corrosion resistor with maintenance monitor T-0090 Adjustment of body positioner sensor T-0100 Deletion of electrical system fault history (1) T-0110 Deletion of electrical system fault history (2)

Page 174 175 176 177 178 179 180 181 182 183 184

8. Welding procedure No. C-0010 Preparation of welding body C-0020 Assembly of split body (1/2) C-0030 Assembly of split body (2/2) C-0040 Tack welding body C-0050 Welding body (1/2) C-0060 Welding body (2/2) C-0070 Welding body instruction (1/2) C-0080 Welding body instruction (2/2) C-0090 Turn over the body C-0100 Welding body protector (1/2) C-0110 Welding body protector (2/2) C-0120 Finishing and painting welded parts of body C-0130 Welding front body mount bracket

Page 185 186 187 188 189 190 191 192 193 194 195 196 197

Appendix Field assembly inspection report

Item

1. Outline of division (Only main components) 1. Bare machine

2. Dump body (Divided into 3)

3. Front axle assembly

4. Rear axle and tire assembly

5. Front tire and wheel assembly

6. Cab assembly

1

2. Dimensions of main components Weight (kg)

Overall length (mm)

Overall width (mm)

Overall height (mm)

Bare machine

21,600

7,930

3,190

3,120

No.

Unit name

1 2

Dump body

15,400

7,250

3,100

3,100

3

Right and left front axle assembly

2,400

2,200

1,700

2,100

4

Rear axle and tire assembly

17,000

4,390

2,700

2,700

5

Front tire and wheel assembly (1 set)

2,000

2,700

750

2,700

6

Cab

3,000

2,760

2,010

2,190

Drawing of bare machine on trailer

3,800 150

1,680

G.L. 530 6,200 11,980

3,000

2,780

Reference Specifications of completed truck Specifications In selfpropelled travel

2

HD785-7

Related items Weight (kg)

Overall length (mm)

64,600 (Mass of machine)

10,290 (Front bumper – End of body)

Overall width (mm)

Overall height (mm)

5,528

5,047 (When empty)

3. Layout of work space (The work space should be wider for the ease of work and must be at least 30 m square.)

Caution: The work space must be level and drained well.

30M

Tire and wheel assembly

CAB

Body

Front axle

Bare machine

50 ton crane

Forklift

30M

Rear axle assembly and tire assembly

Light units keeping place Platform, front support, mudguard, rear support, fire prevention cover, poke rock ejector, drive shaft, etc.

Compressor parts and tools keeping place 50 ton crane

3

4-1. Rough schedule of assembly and welding Day Hour

1st day 1

2

3

4

5

6

7

8

Condition of chassis

Rough contents of assem- Positioning rear axle bly work Positioning chassis

Installing front axle Installing tires

Crane 50 ton

25 ton

25 ton

Approx. 2 m

Forklift

4 ton * Fork length: Approx. 2 m Number of workers

2

Day Hour

1st day 1

2

3

4

5

6

7

8

Condition of body

Contents of welding work

Unloading Removal of stands and fixing parts

Crane 25 ton Number of workers

4

25 ton 3

Positioning and fixing split body Welding back side

4-2. Rough schedule of assembly and welding Day Hour

2nd day 1

2

3

4

5

6

7

8

7

8

Condition of chassis

Rough contents of assem- Installing support bly work Installing cab

Piping and wiring

Crane 50 ton

50 ton

Forklift

Number of workers

2

Day Hour

2nd day 1

2

3

4

5

6

Condition of body

Contents of welding work

Positioning and fixing split body Welding back side

Turning over

Crane 25 ton Number of workers

3

5

4-3. Rough schedule of assembly and welding Day Hour

3rd day 1

2

3

4

5

6

7

8

7

8

Condition of chassis

Rough contents of assem- Installing platform bly work Painting

Supply of oil and coolant Starting engine

Crane

Forklift

Number of workers

2

Day Hour

3rd day 1

2

3

4

5

6

Condition of body

Contents of welding work

Welding inside of body

Crane 25 ton Number of workers

6

3

Welding protector

4-4. Rough schedule of assembly and welding Day Hour

4th day 1

2

3

4

5

6

7

8

7

8

Condition of chassis

Mounting body Rough contents of assemAdjusting shims bly work Field welding

Crane 50 ton

25 ton

Number of workers

25 ton

2

Day Hour

4th day 1

2

3

4

5

6

Condition of body

Contents of welding work

Crane

Number of workers

7

4-5. Rough schedule of assembly and welding Day Hour

5th day 1

2

3

4

5

6

7

8

7

8

Condition of chassis

Installing exterior parts Rough contents of assemPainting bly work

Maintenance, adjustment Inspection

Crane 25 ton Number of workers

2

Day Hour

Condition of body

Contents of welding work

Crane

Number of workers

8

5th day 1

2

3

4

5

6

5-1 List of jigs, tools, and consumables for field assembling (1/2) No.

Item

Specification

Q'ty

Remarks

1

Crane

5 ton

2

See Field Assembling Procedures

2

Crane

50 ton

2

See Field Assembling Procedures

3

Forklift

4 ton

1

See Field Assembling Procedures

1220N2

1

4

Gas cutting machine

5

Torch

6

Acetylene gas

7

Oxygen gas

8 9 10

1 1

For gas cutting machine

14.7 MPa {150kg/cm²}

1

For gas cutting machine

Grinder (round)

FG50L-1

1

Grindstone

SCW50 x 19 x 10

1

Grinder

LISG-7S

1

11

Grindstone

180ø x 6 x 22

3

For finishing

12

Dia. bar

CB7C105

1

13

Dia. bar blade

6GH

1

14

Semi-automatic welding machine

500A

3

15

Hand shield

GP-1S

3

16

Welding wire for semi-auto1.2 mm matic welding machine

17

Chipper scaling hammer

FCM-20F

2

18

Port power

300 mm for 10 ton

1

For adjustment of dump body deviation

19

Hydraulic jack

10 ton

1

For dump body For dump body

80kg

20

Hydraulic jack

5 ton

1

21

Shaft

WJ-H46-74001-023

1

22

Refractory cloth

1 m x 10 m

1

Protection when field welding

23

Spacer

ATH-465-027

3

Use when welding exhaust flange in field

24

Nitrogen gas injector

7926-10-1000

1

25

Nitrogen gas bottle

14.7 MPa {150 kg/cm²}

1

26

Tire inflation gauge

No. 2252

1

27

Grease pump gun

For 20kg can

1

28

Grease

GL-2

5 kg

29

Footstool

3-step

1

30

Footstool

6-step

1

31

Blue sheet

5 m x 10 m

5

Injection into suspension

Protection for equipment

32

Wood block

300 mm square, 1 m long

12

* Quantity depends on using condition

33

Oil jack

5l

1

For oil injection

34

Oil

See Field Assembling Procedures.

–

See Field Assembling Procedures

35

Oil sump, washing can

36

Drained oil can

37

Cloth

38

Diesel fuel

39

Antifreeze

40

Air hose

2 Empty drum can

1 5kg

See Field Assembling Procedures.

For refilling fuel 5l

6ø x 1m

1

For adding in sub-tank (to change mixing ratio depending on local weather) For air bleeding

9

5-2 List of jigs, tools, and consumables for field assembling (2/2) No.

Item

Specification

Q'ty

Remarks

41

Sanding machine for scaling-off coating

914B

42

Sandpaper

#80

100

43

Sandpaper

#180

10

44

Cup gun set

W87-20R2S

1

Use for coating

45

Brush

1

Use to repair coating.

46

Air compressor

Not less than 3.5 m³ or 7 kg/cm²

1

47

Air hose

With mouthpiece of ø12

5

48

Impact wrench

UW-13SK

2

49

Impact wrench

KW-3800P

1

50

Impact wrench

UW-9SK

2

51

Extension for impact wrench 38S

150 mm long

1

1

For impact grinder

52

Socket

1 inch x 46 mm

1

For tightening tire

53

Socket

1 inch x 30 mm

1

For tightening support

54

Torque-wrench

2800QL

1

For drive shaft and body pin

55

Torque-wrench

21000QLE

1

For tightening tire

56

Convex

5m

1

57

Locktite

LT-2

1

58

Vinyl tape

59

Standard tool (ISO specification)

700SX

2

60

Bar

1m

1

61

Pointed steel bar

1

1

62

Large hammer

10 lb

1

63

Axle pin installation guide

ATH-785-078

2

64

Shackle

BD10 for 500 kg

4

65

Shackle

BC40 for 10 tons

4

Use to bundle harnesses

For hole alignment

For mounting body

66

Chain

ATH-465-042

1

Multi purpose

67

Nylon shoe ring

100 mm wide x 5 m

2

For mounting fuel tank

68

Nylon shoe ring

60 mm wide x 3 m

1

For mounting support and small articles

69

Nylon shoe ring

100 mm wide x 12 m

1

For mounting front tires

70

Nylon shoe ring

30 mm wide x 2 m

3

For installing front axle

71

Nylon shoe ring

100 mm wide x 3 m

1

For installing front axle

72

Pin

ø60 × 250 mm

2

For slinging chassis, rear side (Safety pin can substitute)

73

Jig for slinging body

ATH-785-006

4

For mounting body

74

Lever block

3/4 tons, LB008

3

For installing front axle

75

Lever block

2 tons, LB020

1

For installing front axle

76

Wire

7m 28ø

2

For slinging chassis

77

Wire

4m 28ø

2

For mounting body

78

Wire

5m 28ø

2

For installing body

1 2 1

For mounting body For slinging chassis For slinging separated body

The following items may be substituted for No. 76 to 78.

ATH-465-039 ATH-465-040 ATH-465-041

10

List of touch-up coating on body for overseas specifications No. 1

Part Name Retane GP primer

Unit

Q'ty

4kg

1

0.8kg

1

4l

1

2

Retane GO hardener

3

Retane GP thinner

4

AX Mightylacq G2KB type natural yellow

16kg

1

5

NAX Mightylacq G2KB type hardener

15kg

1

6

X Mightylacq G2 500 standard thinner

17l

1

7

Acryliquid cloud gray

Spray can

1

8

Heat-resistance silver

Spray can

1

11

5-3. Tools and consumables Note: Komatsu cannot accept any responsibility for special tools manufactured according to these sketches.

Body alignment shaft

HEAT TREATMENT

MATERIAL

—

STKM13A

PART NAME

QTY

Shaft

1

WJ-H46-74001-023

Body lifting pin

HEAT TREATMENT

MATERIAL

—

SS400

PART NAME

QTY

Body lifting pin

4

AHT-785-006

12

Sketches of special tools Note: Komatsu cannot accept any responsibility for special tools manufactured according to these sketches.

When welding by actually positioning exhaust flange on machine

HEAT TREATMENT

MATERIAL

PU-4

SS40

PART NAME

QTY

SPACER

3

ATH-465-027

Body assembly lifting tool

HEAT TREATMENT

MATERIAL

—

—

PART NAME

QTY

Body assembly lifting tool

1

ATH-465-039

13

Chassis lifting tool

HEAT TREATMENT

MATERIAL

—

—

PART NAME

QTY

Chassis lifting tool

2

ATH-465-040

Dump body lifting tool

HEAT TREATMENT

MATERIAL

—

—

PART NAME

QTY

Split dump body lifting tool

1

ATH-465-041

14

Universal lifting tool

HEAT TREATMENT

MATERIAL

—

—

PART NAME

QTY

Universal lifting tool

1

ATH-465-042

Front axle installation guide

HEAT TREATMENT

MATERIAL

—

—

PART NAME

QTY

Front axle installation guide

2

ATH-785-078

15

Assembly process No.

Oil, grease, and coolant

0010 Method of using fuel, lubricant, and coolant according to ambient temperature t Fuel, oil Use the correct type for the ambient temperature as shown in the table below. a Specified capacity: Total amount of oil including oil for components and oil in piping Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. a When starting the engine in an ambient temperature of less than 0째C, always use EOS0W30, or EOS5W40, even though the temperature goes up to 10째C during the daytime. t Coolant Komatsu genuine super coolant (AF-NAC) is added to the cooling water, so there is no need to change it for temperatures down to -10째C. If the temperature goes below -10째C, adjust the density. For details, see CLEANING INSIDE OF COOLING SYSTEM in the WHEN REQUIRED Section of the Operation and Maintenance Manual.

a For details of the notes (e.g., Note. 1, Note.2

16

) in the table, see the Operation and Maintenance Manual.

Assembly process No.

Levels of oil, grease, and coolant

0020

Lubrication point

Type of oil

Specified capacity (l)

Refill capacity (l)

Volume of refilled oil (l)

Engine oil pan

Engine oil

134

129

—

Transmission case (Including brake sub-tank)

404

241

200

Steering and hoist oil tank

270

175

150

Front suspension

29.8 each on right and left sides

—

—

Rear suspension

16.5 each on right and left sides

—

—

Differential case

137

137

—

Power line oil

64 each on right and 64 each on right and left sides left sides

Final drive case

—

Fuel tank

Diesel fuel

1,308

—

—

Cooling system

Coolant

283

279

—

Caution) Before starting the engine, be sure to check each oil/coolant level.

Do not steer the machine largely before adjusting the suspension (If it is steered largely, the piping may be damaged).

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

17

Assembly process No.

Positioning rear axle assembly

0030 Slinging of rear axle 1. Sling the rear axle and tire assembly with a 50 ton crane.

Slinging position: Rod mounting portion on differential Weight: 20 ton (Including sling)

Positioning of rear axle 1. Position the rear axle. See the following figure.

(Secure the ground clearance under the coupling section so that the rear axle assembly will be horizontal.)

When positioning the rear axle on the ground, prevent slanting of the machine caused by subsidence of the ground.

2. Lock the wheels with chocks to prevent the rear axle from moving.

Wood block

1,200

Precautions

Necessary tools Name Lock the wheels with chocks to prevent the rear axle Nylon sling from moving.

(250 mm wide Ă— 5 m)

Other remarks

18

Necessary equipment Q'ty Name Q'ty 1 Crane (50 ton) 1

Assembly process No.

Slinging and moving of bare machine

0040 Sling of bare machine Front 12.5 ton (Including sling) Crane: 50 ton

Rear 10.8 ton (Including sling) Crane: 25 ton

Body lock pin

Slinging positions View f rom rear of bare machine

1. Apply cloths etc. to the body so that the body will not be damaged when it is slung.

2. Sling the bare machine with 2 cranes (Front side: 50 ton, Rear side: 25 ton).

Sling : Chain sling (ATH-465-040) or ø28 wire Slinging position on front side : Frame slinging bracket Slinging position on rear side : Body lock pin installing position * Insert the body lock pin from inside of the machine (See the above figure).

3. Raise the differential upper part installing rod (upper rod).

Raised upper rod

Moving of bare machine 1. Move the bare machine to above the rear axle.

Precautions Insert the body lock pin for slinging the rear side from inside of the machine. (If it is inserted from outside, it cannot be removed after the tire is installed.)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty Cranes (50 ton, 25 ton) 1 each Sling (ATH-465-040) 2 Pin (60 ø × 250 mm) 2 Wire (7 m, 28 ø) 2

Other remarks

19

Assembly process No.

Connection of rod and rear suspension

0050 Connection of rod and rear suspension Tack-weld nylon sling and lever block.

(Used to fix lower arm)

* Carry out work simultaneously.

1. Connect A, B and C in order.

Remove the pins installed temporarily and the spacers and bolts to be used in step 3.

A (1) (2) (3) B (4) (5) (6) C (7) (8) (9)

2.

3.

4.

5.

6.

Part No. 561-52-81210 01010-81430 569-40-61710 561-52-81210 01010-81430 569-40-61710 561-52-81210 01010-81425 569-40-61710

Part name Pin Bolt Washer Pin Bolt Washer Pin Bolt Washer

Q'ty 2 2 2 2 2 2 2 2 2

Condition of parts Temporarily installed to rear axle A Temporarily installed to rear axle A Temporarily installed to rear axle A Temporarily installed to frame B Temporarily installed to frame B Temporarily installed to frame B Temporarily installed to rear axle C Temporarily installed to rear axle C Temporarily installed to rear axle C

Adjust the pin holes and remove the rod from the pin holes temporarily.

Put the spacer in the rubber part of the spherical bushing. (See the figure at right.)

Adjust the pin holes and insert the pin.

Install the lock bolt and washer.

Supply grease.

Precautions

1.

2.

3.

4.

Necessary tools Name When adjusting the holes, take care not to catch Nylon sling your finger.

If the spacer is installed forcibly, it is deformed. Take (60 mm wide Ă— 3 m) care.

Lever block When hitting the pin, take care not to crash the (2 ton, LB020) grease fitting.

Clean the pins installed temporarily and parts A, B and C. Other remarks

20

3

Q'ty 2 2

Necessary equipment Name Q'ty

Assembly process No.

Positioning bare machine

0060

2,800

1,000

Wood block

Steel plate

Remove chock on front side.

Wood block

Sttel plate

1. Set the wooden blocks 1 m high under the vertical member as shown above.

(If wooden blocks are set under the bumper, the machine is more stabilized.)

When positioning the bare machine on the ground, place a steel plate under the wood blocks so that the bare machine will not sink and lean.

2. Remove the sling.

3. Discard the bolts and washers used to install the sling since they are not used any more.

Precautions

Necessary tools Name Take care that the chassis will not move.

Wood block Set the bare machine to proper height so that you can (300 mm square, 1 m) install the front tires.

Steel plate

Q'ty 6

Necessary equipment Name Q'ty

1

Other remarks

21

Assembly process No.

Connection of rear axle cooling hose

0070 Connection of rear axle cooling hose Rear axle Hose plug on machine side, 2 pieces

Rear axle

Rear axle plug, 4 pieces

If flange is loosened a little and a plate is inserted before piping is disconnected, oil leakage is decreased (*1).

Fig.1

Plate

Flange

1. Remove all of the hose plugs on the machine side (2 pieces) and rear axle plugs (4 pieces).

2. Connect the hoses by using the following parts.

(1) (2) (3) (4) (5) (6) (7) (8)

Part No. 07371-21465 07372-21245 01643-51232 07000-F3048 07371-32076 07372-21240 01643-51232 07000-F2060

Part name Flange Bolt Washer O-ring Flange Bolt Washer O-ring

Q'ty 4 8 8 2 4 8 8 2

Note) Do not damage the O-ring.

Condition of parts Installed parts Installed parts Installed parts Installed parts Installed parts Installed parts Installed parts Installed parts

3. Clean the parts stained with oil.

Precautions

Necessary tools Name When connecting each hose, check that no dirt is in the Impact wrench hose and the O-ring is fitted securely.

(For M12 mm) When removing each plug, set an oil drain case to Socket (19 mm) receive the leaking oil. *1. Dimension of plate (See "Fig 1") Large pipe: W = 63 mm Small pipe: W = 55 mm

22

Other remarks

Q'ty 1 1

Necessary equipment Name Q'ty

Assembly process No.

Connection of rear axle brake hose

0080 Connection of rear axle brake hose

a

b

c

a b View Y c Connection: From block to front side of valve (Reuse O-ring)

b

c

View Z Connection: From tube to rear side of valve (Reuse O-ring)

1. Remove the plugs from each part.

2. Connect the 3 hoses.

3. Clean the parts stained with oil.

Caution: Install the hoses horizontally.

Precautions 1. Take care extremely not to mistake the connecting positions.

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

2. When removing each plug, do not lose the O-ring.

Other remarks

23

Assembly process No.

0085

Connection of rear axle brake hose (ASR specification: If equipped)

Connection of rear axle brake hose

c

b

a a

View Y

b

Connection: From block to front side of valve (Reuse O-ring)

c

Connection: CNJ13

d

Connection: CNJ12

c

a

1. Remove the plugs from each part.

2. Connect the 3 hoses.

View Z

3. Connect connectors "CNJ12" and CNJ13".

Connection: From tube to rear side of valve (Reuse O-ring)

4. Clean the parts stained with oil.

Caution: Install the hoses horizontally.

Precautions 1. Take care extremely not to mistake the connecting positions.

Necessary tools Name

2. When removing each plug, do not lose the O-ring.

Other remarks

24

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0086

Connection of valve sub-assembly wiring harness (ASR specification: If equipped)

Connection of valve sub-assembly wiring harness * Wiring harness length between a -- b: 600 mm Wiring harness length between c -- d: 600 mm

Rear view of machine body

Connect CN WSRR.

Connect CN WSRL.

Remove clip and bolt and fix wiring harness.

(1) (2) (3)

Part No. 04434-51512 01024-81016 08193-21012

View Z

View Y

Part name Clip Bolt, sems Clip

Q'ty 5 6 2

Condition of part (Parts list No.) Installed temporarily to machine Installed temporarily to machine Installed temporarily to machine

1. Remove the clips and bolts installed temporarily and fix the wiring harness.

2. Connect connectors "CN WSRR" and "CN "WSRL".

3. Fix the sensor on the back side of the valve sub-assembly.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

25

Assembly process No.

0087

Connection and fixing of piping going to rear axle (Sand terrain/ASR specification: If equipped)

Connection and fixing of piping going to rear axle

Z

(190)

(225)

ASR valve Rear axle slack adjuster

Rear axle

View X

Connection

Rear axle

View Z

1. Fix the hose going to the rear axle to the rear axle tube. (See view X.) 2. Connect the hose fixed in step 1 to the rear axle.

(1) (2) (3) (4) (5) (6)

Part No. 416-88-11140 04434-52110 07095-20314 07283-32236 01643-31032 01580-11008 Precautions

Part name Plate Clip Cushion Clip Washer Nut

Q'ty 2 2 2 2 4 4

Condition of part (Parts list No.) Packed separately (HD785-7-087) Packed separately (HD785-7-087) Packed separately (HD785-7-087) Packed separately (HD785-7-087) Packed separately (HD785-7-087) Packed separately (HD785-7-087) Necessary tools Name

Other remarks

26

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0090

Connection and fixing of rear grease piping and supply of grease

Connection and fixing of rear grease piping and supply of grease

FWD

X

b

Y

c a

A

a b

View X

c

FWD 1. Connect 1 tube to part A (1 each on the right and left sides). (Left side: (2), Right side: (6)) b

2. Install elbows (4) to the ends of tubes (2) and (6) (directing them straight down) and connect them to the frame.

a

3. Fix tubes (2) and (6) with clips (8) and bolts (9).

c

4. Supply grease (G2-LI) through part A.

a A

b

View Y

c

5. Supply grease until it flows out of the lubricated spherical bushing, seal, or boot lip.

6. Grease must not ooze from the pipe joints

(2) (4) (6) (8) (9)

Part No. 561-52-82641 421-09-12540 561-52-82631 04434-50608 01024-80816

Part name Tube Elbow Tube Clip Bolt sems

Precautions 1. Take care extremely not to mistake the connecting positions.

Q'ty 1 2 1 4 4

Condition of part (Parts list No.) Packed separately (HD785-7-090) Packed separately (HD785-7-090) Packed separately (HD785-7-090) Packed separately (HD785-7-090) Packed separately (HD785-7-090) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

27

Assembly process No.

Preparation for installing front axle

0100 Preparation for installing front axle 1. Remove the packing materials for each part.

(1) (2) (3) (4) (5) (6) (7) (8) (9)

Part No. 561-40-61550 561-40-61560 566-52-41950 01010-81425 569-40-61710 561-40-81540 566-52-61150 01010-81425 569-40-61710

Part name Pin Pin Spacer Bolt Washer Pin Spacer Bolt Washer

Q'ty 2 2 4 4 4 2 4 2 2

Condition of parts Temporarily installed to machine (L = 260 mm) Temporarily installed to machine (L = 290 mm) Temporarily installed to machine Temporarily installed to machine Temporarily installed to machine Temporarily installed to machine Temporarily installed to machine Temporarily installed to machine Temporarily installed to machine

2. Sling the front axle (See the attached photo).

Precautions

Necessary tools Name

Necessary equipment Q'ty Name Q'ty 1. Dimensions of pin vary on each portion. Place pins Nylon sling (30 mm wide Ă— 2 m) 3 Crane (25 ton) 1 near relevant locations to install pins in place with Nylon sling (100 mm wide Ă— 3 m) 1 ease.

2. Adjust sling so that suspension cylinder becomes Lever block (3/4 ton, LB008) 3 vertical against ground.

Lever block (2 ton, LB020) 1 Hook slings at suspension cylinder assembly and hub stud portion.

Other remarks

28

Assembly process No.

Installation of front axle

0110 Installation of frontxle

Fix with spacer, pin and lock bolt.

Move up.

o When installing steering cylinder

Move up.

How to sling

Fix with spacer, pin and lock bolt.

o When installing suspension cylinder

Lever block

1. Move up the A-arm mounting part with a Fix to fuel tank crane. bracket.

2. While adjusting the crane and lever block, adjust the A-arm to the pin holes of the frame once and then lower it with the lever block.

3. Insert the removed spacers (8 pieces) in the rubber covers of the spherical bushings of the A-arm (4 places on right and left sides) and then adjust the pin holes again with the lever block. (Adjust the horizontal direction with the lever block, too. See the right upper photo.)

4. Install the spacers and pins and fix them with the lock bolts.

(If you use the guide as shown at right, you can install easily.)

5. Remove the sling from the A-arm.

6. While adjusting the crane, install the upper part of the suspension similarly to the A-arm.

7. Remove the sling and supply grease to each part.

Precautions

Guide ATH-785-078

A-arm

Necessary tools Name

Necessary equipment Q'ty Name Q'ty 1. Check spacer for deviation.

Nylon sling (30 mm wide Ă— 2 m) 3 Crane (25 ton) 1 2. When making alignment, take care not to catch your Nylon sling (100 mm wide Ă— 3 m) 1 fingers in it.

Lever block (3/4 ton, LB008) 3 3. Check for O-ring on spherical bushing.

Lever block (2 ton, LB020) 1 Guide pin (ATH-785-078)

Other remarks

29

Assembly process No.

Connection of front axle suspension pressure sensor

0120 Connection of front axle suspension pressure sensor

Z

Connection Suspension oil pressure sensor (Left) CN SUFL Suspension oil pressure sensor (Right) CN SUFR

1. After installing the front axle, connect the suspension oil pressure sensor wiring harness.

2. Fix the suspension oil pressure sensor wiring harness of the left front axle with clips (1) and bolts (2).

3. Fix the suspension oil pressure sensor wiring harness of the right front axle with clips (1) and bolts (2).

Suspension oil pressure sensor (Right) CN SUFR

A

A 2

Suspension oil pressure sensor (left) CN SUFL View Z

(1) (2)

Part No. 04434-50810 01024-81020 Precautions

Part name Clip Bolt, sems

Section A-A

Q'ty 3 3

Condition of parts Temporarily installed to machine Temporarily installed to machine Necessary tools Name

Necessary equipment Q'ty Name Q'ty Nylon sling (30 mm wide Ă— 2 m) 3 Crane (25 ton) 1 Nylon sling (100 mm wide Ă— 3 m) 1 Lever block (3/4 ton, LB008) 3 Lever block (2 ton, LB020) 1

Other remarks

30

Assembly process No.

0125

Connection of front axle wheel speed sensor (ABS specification: If equipped)

Connection of front axle wheel speed sensor 1. Fix and connect the wheel speed sensor wiring harness with the clip installed to the front axle.

Connection: CN WSFL Wheel speed sensor (FL)

Y

View Y Fixing with clip (installed to front axle)

30째

Left front axle

Fixing with clip (installed to front axle): Direct down 5째

Connecting: CN WSFR Wheel speed sensor (FR)

Z

Fixing with clip (installed to front axle)

View Z

50째

Right front axle Fixing with clip (installed to front axle): Direct down 5째

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

31

Assembly process No.

Connection of steering cylinder and tie rod

0130 Connection of steering cylinder and tie rod

L = 260mm

Reconnection

Reconnection

L = 240mm

(1) (2) (3) (4) (5)

Part No. 561-40-61531 561-40-61570 01010-81425 569-40-61710 561-40-61631

Part name Pin Pin Bolt Washer Boot

Q'ty 2 2 4 4 8

Condition of parts Temporarily installed to front axle Temporarily installed to front axle Temporarily installed to front axle Temporarily installed to front axle Temporarily installed to front axle

1. Take out the remote grease tube from the top of the pin of the front axle lever and remove pins (1) and (2) and bellows (5). Remove the air cylinder cover, too.

2 Set the lever in parallel with the ground by adjusting the crane.

3. Set boots (5), adjust the pin holes, and install the pins.

4. Tighten the lock bolts.

5. Connect the remote grease tube again.

6. Supply grease to each part.

Precautions

Necessary tools Name

Necessary equipment Q'ty Name Q'ty 1. Check that the O-rings are fitted to the steering cylNylon sling (30 mm wide Ă— 2 m) 3 Crane (25 ton) 1 inder and tie rod spherical bushing.

2. Note that the lengths of the pins are different from Nylon sling (100 mm wide Ă— 3 m) 1 Lever block (3/4 ton, LB008) 3 one another.

Lever block (2 ton, LB020) 1

Other remarks

32

Assembly process No.

Connection of front axle brake cooling hoses

0140 Connection of front axle brake cooling hoses Connection

Connection

Connect rear side to rear side.

Connect rear side to rear side.

Connect front side to front side

Connect front side to front side.

Left side

Right side

1. Remove all of the hose plugs on the machine side (2 pieces) and front axle plugs (4 pieces).

2. Connect the hoses by using the following parts. (Connect the right and left side similarly.)

(1) (2) (3)

Part No. 07371-21465 07375-21240 07000-F3048

Part name Flange Bolt O-ring

Q'ty 8 16 4

Condition of parts Installed parts Installed parts Installed parts

3. Clean the parts stained with oil.

* Before connecting the front axle brake cooling hose, set the hose clamp as shown in the following figure.

(Flange face - center of clip width)

Frame seen from front

Precautions When removing each pipe plug, prepare a drain case to receive the leaking oil.

Necessary tools Name

Q'ty

(Flange face - center of clip width)

Necessary equipment Name Q'ty

Other remarks

33

Assembly process No.

Connection of front axle brake hoses

0150 Connection of front axle brake hoses Connection

a

a

b

After connecting hose, reassemble.

a b

b

Left front axle

Connection

a

b

b a a

After connecting hose, reassemble.

b

Right front axle

1. Remove the plugs, clamps, cushions and bolts from each part.

2. Connect 4 hoses (2 pieces each on right and left sides) and install the clamps, cushions and bolts removed in step 1.

3. Clean the parts stained with oil.

Precautions 1. Take care extremely not to mistake the connecting positions.

2. When removing each plug, do not lose the O-ring.

Necessary tools Name

Other remarks

34

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Connection of front axle auto suspension piping

0160 Color of SOL B-A band: Black Color of SOL B-B band: Green

Connection of front axle auto suspension piping

Color of SOL A-A band: Yellow

Color of SOL A-B band: Red

Section A-A Connection

Color of SOL A-A band: Yellow

Color of SOL A-B band: Red Color of SOL B-A band: Black

Color of SOL A-B band: White

SOL B-B

Color of SOL B-B band: Green

Left front axle

Color of SOL B-A band: Blue Color of SOL A-A band: Brown

Section B-B

Color of SOL A-A band: Brown Color of SOL A-B band: White

Connection

Color of SOL B-A band: Blue

SOL B-B

Right front axle

1. Remove the plugs from each part.

2. Connect 8 hoses (4 pieces on right side and 4 on left side).

3. Clean the parts stained with oil.

Precautions 1. Take care extremely not to mistake the connecting positions.

2. When removing each plug, do not lose the O-ring.

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

35

Assembly process No.

Fixing of front axle auto suspension piping

0165 Fixing of front axle auto suspension piping 1. Fix the front axle and auto suspension piping. * For the clamp locations, see the following figure.

View Q

: 3 places

View P

: 8 places View Y: Right axle

View X: Left axle

107 (Actual length of center of brake hose)

420 (Actual length of center of brake hose) 193 (Actual length of center of brake hose)

466 (Actual length of center of brake hose)

532 (Actual length of center of auto suspension hose)

268 (Actual length of center of auto suspension hose)

Right axle seen from front

Left axle seen from rear

(1) (2) (3) (4) (5) (6) (7) (8)

Part No. 04434-53212 04434-53412 07095-00420 07095-00423 01024-81025 01580-11008 01024-81020 01643-31032 Precautions

Part name Clip Clip Cushion Cushion Bolt, sems Nut Bolt, sems Washer

Q'ty 8 4 1 3 4 4 4 4

Condition of part (Parts list No.) Packed separately (HD785-7-165) Packed separately (HD785-7-165) Packed separately (HD785-7-165) Packed separately (HD785-7-165) Packed separately (HD785-7-165) Packed separately (HD785-7-165) Packed separately (HD785-7-165) Packed separately (HD785-7-165) Necessary tools Name

Other remarks

36

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0166

Fixing of front axle auto grease piping (If equipped: Auto grease specification)

Fixing of front axle auto grease piping 1. Fix the front axle and auto grease piping. * For the clamp locations, see the following figure.

View Z

190 (Actual length of center of brake hose) 80 (Actual length of center of brake hose)

270 (Actual length of center of brake hose)

480 (Actual length of center of brake hose)

300 (Actual length of center of auto grease hose)

(1) (2) (3) (4) (5) (6)

Part No. 04434-52310 04434-53412 07095-00420 01024-81025 01643-31032 01580-11008 Precautions

600 (Actual length of center of auto grease hose)

View X: Left axle

Part name Clip Clip Cushion Bolt, sems Washer Nut

Q'ty 4 4 4 4 4 4

View Y: Right axle

Condition of part (Parts list No.) Packed separately (HD785-7-166) Packed separately (HD785-7-166) Packed separately (HD785-7-166) Packed separately (HD785-7-166) Packed separately (HD785-7-166) Packed separately (HD785-7-166) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

37

Assembly process No.

0167

Connection of left front axle auto grease piping (If equipped: Auto grease specification)

Connection of left front axle auto grease piping 1. Connect the left front axle and auto grease piping.

Connect: Band color "Yellow" L2 View Z Connect: Band color "Blue" L3

View W

Connect: Band color "Green" L6

Connect: Band color "Red" L1

Connect: Band color "White" L4 View Y

(1) (2) (3)

Part No. 561-95-63290 04434-51010 01024-81016 Precautions

Part name Elbow Clip Bolt, sems

Q'ty 3 1 1

Condition of part (Parts list No.) Installed to machine body Packed separately (HD785-7-167) Packed separately (HD785-7-167) Necessary tools Name

Other remarks

38

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Connection of right front axle auto grease piping (If equipped: Auto grease specification)

0168

Connection of right front axle auto grease piping 1. Connect the right front axle and auto grease piping.

Connect: Band color "Blue" R3

Section A-A

Connect: Band color "Black" R5

Connect: Band color "White" R4

Connect: Band color "Red" R1 Connect: Band color "Green" R6

View Y

View X

(1)

Part No. 561-95-63290

Precautions

Part name Elbow

Q'ty 3

Condition of part (Parts list No.) Installed to machine body

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

39

Assembly process No.

Installation of bumper and front axle step

0170 Installation of bumper step

1. Remove bolts (1) from the bumper and install steps (2).

2. Install steps (4) with bolts (3).

(1) (2) (3) (4)

Part No. 01024-81225 561-54-86871 01024-81230 561-54-31690

Part name Bolt, sems Step Bolt, sems Step

Q'ty 8 2 8 2

Condition of part (Parts list No.) Installed to bumper Packed separately (HD785-7-170) Packed separately (HD785-7-170) Packed separately (HD785-7-170)

Installation of front axle steps

L.H. R.H.

1. Install the steps to the right and left front axles.

(5) (6) (7) (8) (9)

Part No. 561-54-86751 561-54-86761 01024-81225 561-54-86740 01024-81030

Part name Bracket L. H. Bracket R. H. Bolt Step Bolt

Precautions There are right and left front axle steps. Since they are stamped as shown below, check the stamps when installing.

Q'ty 2 2 8 2 8

Condition of part (Parts list No.) Packed separately (HD785-7-170) Packed separately (HD785-7-170) Packed separately (HD785-7-170) Packed separately (HD785-7-170) Packed separately (HD785-7-170) Necessary tools Name

"R.H" Other remarks

40

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of front axle step (EU specification)

0171 Installation of front axle step

R.H. L.H.

1. Install the steps to the right and left front axles.

(1) (2) (3)

Part No. 561-54-88300 561-54-88400 01024-81225

Part name Step assembly R.H. Step assembly L.H. Bolt

Precautions The right and left front axles are different. When installing them, confirm their part Nos.

Q'ty 1 1 4

Condition of part (Parts list No.) Packed separately (HD785-7-172) Packed separately (HD785-7-172) Packed separately (HD785-7-172)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sale code : 5AC11

41

Assembly procedure No.

Installation of front axle step

0173 Installation of front axle step

Z

⑧⑨

Detail of View Z

Reference figure Front axle R.H.

⑥ R.H. ⑦ L.H.

①②

③⑤ R.H. ④⑤ L.H.

1. Install steps to right and left side of front axle.

No. (1) (2) (3) (4) (5) (6) (7) (8) (9)

Part No. 561-54-8A741 01024-81030 561-54-86761 561-54-86751 01024-81230 561-54-8A240 561-54-8A250 561-54-8A260 01024-81225

Precautions There are right and left front axle steps. Since they are stamped as shown below, check the stamps when installing.

Part Name Step Bolt, sems Bracket R.H. Bracket L.H. Bolt Plate L.H. Plate R.H. Bracket Bolt, sems

42

State of part (Parts list No.) Separately Packed （HD785-7-170） Separately Packed （HD785-7-170） Separately Packed （HD785-7-170） Separately Packed （HD785-7-170） Separately Packed （HD785-7-170） Separately Packed （HD785-7-170） Separately Packed （HD785-7-170） Separately Packed （HD785-7-170） Separately Packed （HD785-7-170）

Necessary tools Name

Other remarks "R, H"

Q'ty 2 4 2 2 8 1 1 2 4

Q'ty

Necessary equipment Name

Q'ty

Assembly procedure No.

0174

Installation of front axle step: Diagonal ladder specification (If equipped)

Installation of front axle step

Z

⑥⑦ Detail of View Z

Reference figure Front axle R.H.

④ R.H. ⑤ L.H.

①③ R.H. ②③ L.H. 1. Install steps to right and left side of front axle.

No. (1) (2) (3) (4) (5) (6) (7)

Part No. 561-54-88301 561-54-88401 01024-81225 561-54-8A250 561-54-8A240 561-54-8A260 01024-81225

Part Name Step assembly R.H. Step assembly L.H. Bolt Plate R.H. Plate L.H. Bracket Bolt

Precautions There are right and left front axle steps. Since they are stamped as shown below, check the stamps when installing.

Q'ty 1 1 8 1 1 2 4

State of part (Parts list No.) Separately Packed （HD785-7-171） Separately Packed （HD785-7-171） Separately Packed （HD785-7-171） Separately Packed （HD785-7-171） Separately Packed （HD785-7-171） Separately Packed （HD785-7-171） Separately Packed （HD785-7-171）

Necessary tools Name

Q'ty

Necessary equipment Name

Q'ty

Other remarks "R, H"

43

Assembly process No.

Installation of tire and wheel assembly

0180 Installation of tire and wheel assembly <How to sling tire and wheel assembly> Apply chock hitch.

Nylon sling

<<Reference>> If forklift is available, you can work easily as shown below.

Place wooden blocks under front axle (under king pin) and place steel plate under them.

Weight of tire: 1,500 kg Wood block Steel plate

Secure tire with wire to prevent tire from falling.

Installed to front axle temporarily

Note) If the block is projected out too much, it will interfere with the installed tire.

Accordingly, set the block inside of the king pin.

3 : 1,519 -- 1,617 Nm

{154.9 -- 164.8 kgm}- 1,617 Nm Tightening torque: 1,519 {154.9 - 164.8 kgm}

(1) (2) (3)

Part No. 569-22-72870 426-09-11520 561-30-80000

Part name Nut Washer Tire assembly

Q'ty 40 40 2

Condition of part (Parts list No.) Temporarily installed to front axle Temporarily installed to front axle Packed separately (HD785-7-180)

1. Remove the nuts and washers installed to the front axle temporarily.

2. Install the tire with the forklift and install the nuts and washers in the order of the numbers shown at right.

Note) Take care that the tire will not fall from the forklift.

When positioning the tire, take care not to damage the valve for inflating the tire.

3. Tighten the nuts with the impact wrench temporarily.

4. Lift up the front part of the chassis with the crane and remove the wood blocks.

5. Tighten the tire mounting nuts with the torque wrench.

(Tightening torque: 1,519 – 1,852 Nm {154.9 – 188.8 kgm}) 6. Touch up the tightened parts (to prevent rusting).

(Use the yellow paint used for the body.)

Precautions

1,11

Take care of position of air valve.

5

3 9

7

8

10 4

6

2

Necessary tools Necessary equipment Name Q'ty Name Q'ty 1. When carrying the tire, take care that it will not fall.

Torque wrench 1 Crane (50 ton) 1 2 When positioning the tire, take care not to damage QLE21000 Forklift (4 ton) 1 the air valve.

Nylon sling 1 Wire 1 (100 mm wide × 12 m) Socket (1 inch × 46 mm) 1

Other remarks

44

Assembly process No.

Installation of drive shaft

0190 Installation of drive shaft

Apply LT-2.

Apply LT-2 3: 343 --343 427- Nm Tightening torque: 427 Nm {34.9 -- 43.5 kgm} {34.9 - 43.5 kgm}

Install larger end to transmission.

(1) (2)

Part No. 561-20-72002 01050-61895

Part name Propeller shaft Bolt

Q'ty 1 8

Condition of part (Parts list No.) Packed separately (HD785-7-190) Packed separately (HD785-7-190)

1. Remove the drive shaft from the machine.

2. Sling the drive shaft with the crane and put it between the rear axle and transmission.

3. Lightly hit the drive shaft spider to fit the faucet joint securely.

4. Install and tighten the bolts in the diagonal order. (For the Fig. 1 tightening order, see Fig. 1. Apply LT-2 to the bolts.)

5. Tighten the bolt again with the torque wrench.

Bolt (2) tightening torque: (Torque wrench: 343 – 627 Nm {34.9 – 43.5 kgm}) 343 – 427Nm 6. Install the guard again. {34.9 – 43.5kgm} Guard tightening torque: 7. Wipe off the grease from the mounting part and 1,180 – 1,470Nm degrease the bolts (coupling). {120 – 150kgm}

Precautions

Necessary tools Name Install drive shaft from the front side and transmission Nylon sling side for the ease of work. (Tighten the bolts on the front (60 mm wide × 3 m) side temporarily and fit the faucet joint securely.)

Torque wrench, 2800QL When installing the rear side, install a chain block to the drive shaft to extend.

4

2

5,1

3

Necessary equipment Q'ty Name Q'ty 2 Crane (25 ton) 1 1

Other remarks

45

Assembly process No.

0200

Installation of oil quick charge box (If equipped: Oil quick charge specification)

Installation of oil quick charge box 1. Install box (1) with bolts (2).

Hydraulic tank

: 5 places

Transmission and brake cooling oil

Brake control oil Steering and H/T oil

Engine oil

Section A-A

(1) (2)

View Z

Part No. X251156860 01024-81225

Precautions

Part name Box, sub-assembly Bolt, sems

Q'ty 1 5

Condition of part (Parts list No.) Packed separately (HD785-7-200) Packed separately (HD785-7-200)

Necessary tools Name

Other remarks

46

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of fuel tank wiring harness cover

0260

FUEL TANK

Wiring harness cover

Installation procedure for cover (1)

Installation of fuel tank wiring harness cover 1. Install cover (1) with the bolts installed to the fuel tank.

(1)

Part No. 561-04-81322

Precautions

Part name Cover

Q'ty 1

Condition of part (Parts list No.) Installed to fuel tank

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

47

Assembly process No.

Installation of toolbox and tool kit

0270 Installation of toolbox

(1) (2) (3)

Part No. 561-98-86110 01024-81225 09460-00000

Part name Tool box, sub-assembly Bolt Lock

Q'ty 1 4 1

Condition of part (Parts list No.) Packed separately (HD785-7-270) Temporarily installed to fuel tank Packed separately (HD785-7-270)

1. Remove the toolbox sub-assembly mounting bolts (installed to the fuel tank temporarily).

2. Fix toolbox sub-assembly (1) with the bolts removed in step 1.

3. Install the attached tool kit.

4. Close the cover of box (1) and tighten the wing screw.

5. Install lock (3).

Precautions

Necessary tools Name

Other remarks

48

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of fuel tank step (If equipped)

0275 Installation of fuel tank step 1. Remove bolts (2) installed to the fuel tank.

2. Install ladder (1) with bolts (2) removed in step 1.

3. Install step (3) to ladder (1) with bolts (4).

EU specification

EU specification

(1) (2) (3) (4) (5) (6)

Part No. 561-54-8A981 01024-D1230 561-54-8A960 01024-D1230 561-54-8A982 561-54-8A900 Precautions

Part name Ladder Bolt Step Bolt Ladder Step

Q'ty 1 8 1 4 1 1

EU specification reference drawing

EU specification reference drawing

Condition of part (Parts list No.) Packed separately (HD785-7-275) Installed to fuel tank Packed separately (HD785-7-275) Packed separately (HD785-7-275) Packed separately (HD785-7-277) Packed separately (HD785-7-277) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code: 6HH68-A or 5AC11

49

Assembly process No.

Installation of rear support

0280 Installation of rear support 1. Remove the bolts and washers installed to the machine body temporarily.

2. Install the rear support assembly. * For adjustment, keep bolts (2) and (5) tightened temporarily until installing the right platform and cab. * Remove rust preventive paint from rear support ground face (on machine frame side).

* Remove rust preventive paint from rear support ground face (on machine frame side).

(1) (2) (3) (4) (5) (6)

Part No. 561-46-80200 01010-82475 01643-32460 561-46-81791 01010-81850 01643-31845

Z

Part name Rear support LH Bolt Washer Rear support RH Bolt Washer

Q'ty 18 18 18 1 7 7

Condition of part (Parts list No.) Packed separately (HD785-7-280) Installed to frame Installed to frame Packed separately (HD785-7-280) Installed to frame Installed to frame

Part name Clip Bolt

Q'ty 18 18

Condition of part (Parts list No.) Packed separately (HD785-7-280) Packed separately (HD785-7-280)

Fixing of air tube 1. Fix the air tube.

(7) (8)

Part No. 04434-51210 01024-81020

View Z

Diagonal front view

Precautions

Necessary tools Name Nylon sling (60 mm wide Ă&#x2014; 3 m) Torque wrench

Other remarks

50

Necessary equipment Q'ty Name Q'ty 1 Crane (25 ton) 1 1

Assembly process No.

0281

Installation of rear support (Muffler specification: If equipped)

Installation of rear support 1. Remove the bolts and washers installed to the machine body temporarily.

2. Install the rear support assembly. * For adjustment, keep bolts (2) and (5) tightened temporarily until installing the right platform and cab.

Muffler specification

* Remove rust preventive paint from rear support ground face (on machine frame side).

* Remove rust preventive paint from rear support ground face (on machine frame side).

(1) (2) (3) (4) (5) (6)

Part No. 561-46-80200 01010-82475 01643-32460 561-84-84391 01010-81850 01643-31845

Z

Part name Rear support LH Bolt Washer Rear support RH Bolt Washer

Q'ty 18 18 18 1 7 7

Condition of part (Parts list No.) Packed separately (HD785-7-281) Installed to frame Installed to frame Packed separately (HD785-7-281) Installed to frame Installed to frame

Part name Clip Bolt

Q'ty 18 18

Condition of part (Parts list No.) Packed separately (HD785-7-281) Packed separately (HD785-7-281)

Fixing of air tube 1. Fix the air tube.

(7) (8)

Part No. 04434-51210 01024-81020

View Z

Diagonal front view

Precautions

Necessary tools Name Nylon sling (60 mm wide Ă&#x2014; 3 m) Torque wrench

Necessary equipment Q'ty Name Q'ty 1 Crane (25 ton) 1 1

Other remarks

51

Assembly process No.

0282

Installation of rear support (ABS specification: If equipped)

* Keep bolts (2) and (5) tightened lightly Installation of rear support for adjustment until the right platform and 1. Remove the bolts and washers installed to the machine. cab are installed.

2. Install the rear support assembly.

(Before installing the left rear support assembly, install ABS assembly (9) with bolts (10). * Remove rust preventive paint from rear support grounding surface (on machine frame side).

View Y

* Remove rust preventive paint from rear support grounding surface (on machine frame side).

(1) (2) (3) (4) (5) (6) (9) (10)

Part No. 561-46-80300 01010-82475 01643-32460 561-84-84391 01010-81850 01643-31845 561-88-80201 01024-81230

Part name Rear support L.H. Bolt Washer Rear support R.H. Bolt Washer ABS front sub-assembly Bolt, sems

Q'ty 18 18 18 1 7 7 1 4

Condition of part (Parts list No.) Packed separately (HD785-7-282) Installed to frame Installed to frame Packed separately (HD785-7-282) Installed to frame Installed to frame Packed separately (HD785-7-282) Packed separately (HD785-7-282)

Part name Clip Bolt

Q'ty 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-282) Packed separately (HD785-7-282)

Fixing of air tube 1. Fix the air tube.

(7) (8)

Part No. 04434-51210 01024-81020

Precautions

Necessary tools Name Nylon sling (60 mm wide x 3 m) Torque wrench

Other remarks

52

Necessary equipment Q'ty Name Q'ty 1 Crane (25 ton) 1 1

Assembly process No.

0283

Installation of rear support (Sand terrain specification: If equipped)

Installation of rear support 1. Remove the bolts and washers installed to the machine.

2. Install the rear support assembly. * Keep bolts (2) and (5) tightened lightly for adjustment until the right platform and cab are installed. * Remove rust preventive paint from rear support grounding surface (on machine frame side).

* Remove rust preventive paint from rear support grounding surface (on machine frame side).

(1) (2) (3) (4) (5) (6)

Part No. 561-46-80200 01010-82475 01643-32460 X250783640 01010-81850 01643-31845

Part name Rear support LH Bolt Washer Rear support RH Bolt Washer

Q'ty 1 18 18 1 7 7

Condition of part (Parts list No.) Packed separately (HD785-7-283) Installed to frame Installed to frame Packed separately (HD785-7-283) Installed to frame Installed to frame

Part name Clip Clip Bolt

Q'ty 2 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-283) Packed separately (HD785-7-283) Packed separately (HD785-7-283)

Fixing of air tube 1. Fix the air tube.

(7) (8) (9)

Part No. 04434-51210 04434-51010 01024-81020

Precautions

Necessary tools Name Nylon sling (60 mm wide Ă&#x2014; 3 m) Torque wrench

Necessary equipment Q'ty Name Q'ty 1 Crane (25 ton) 1 1

Other remarks

53

Assembly process No.

Installation of muffler

0290 Installation of muffler Fire prevention cover <Points of work> * Before tightening the bolts permanently, install all the parts

Z

X Tightening torque: 3: 8.8 – 9.8 Nm {0.9 – 1.0 kgm}

(1) (2) (3) (4) (5) (6)

Part No. 561-02-81210 6502-12-1722 01024-81235 561-02-81350 01580-11008 01643-31032

Part name Tube V coupling Bolt Band Nut Washer

* Tightening bolts to secure fire prevention cover.

Q'ty 1 1 2 1 4 2

View Z

Condition of part (Parts list No.) Packed separately (HD785-7-290) Packed separately (HD785-7-290) Packed separately (HD785-7-290) Installed to frame Installed to frame Installed to frame

1. Remove the fire prevention cover installed to machine body (rear support).

2. Remove parts (4) – (6) installed to the frame temporarily and install tube (1) to the frame with parts (2) and (3).

3. Clamp tube (1) with parts (4) – (6) removed in step 2. See "Tightening procedure for exhaust pipe band" (below).

4. Reinstall the fire prevention cover removed step 1.

Tightening procedure for exhaust pipe band Tighten the nuts of exhaust pipe band ((4) 561-02-81350) according to the following procedure (See view X).

1) Tighten nut "a" to 13.7 Nm {1.5 kgm}.

2) Tighten nut "b" to 59 – 74 Nm {6 – 7 kgm} and then return nut "a" slightly.

Precautions

Necessary tools Name

Other remarks

54

a b Q'ty

View X Necessary equipment Name Q'ty

Assembly process No.

0291

Installation of muffler (Body heating-less/Exhaust selector box specification: If equipped)

Installation of muffler

a: 4 places

3 : torque: Tighten

8.8–9.8Nm {0.9–1kgm}

Front view of machine (Sectional view of rear support)

Rear view of machine

1. Install muffler sub-assembly (1) with bolts (2).

2. Install the exhaust pipe on the machine side and muffler sub-assembly (1) with V-coupling (3). See "Assembly procedure for exhaust pipe at muffler connecting part".

(1) (2) (3) (4)

Part No. 561-84-80101 01024-81230 6502-12-1722 561-84-84341

Part name Muffler sub-assembly Bolt, sem V coupling Tube

Q'ty 1 4 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-291) Packed separately (HD785-7-291) Packed separately (HD785-7-291) Installed to machine

Assembly procedure for exhaust pipe at muffler connecting part 1) When installing exhaust pipe (4) and muffler sub-assembly ((1)), 1. Install frame-side V-coupling (3) temporarily. * At this time, adjust the flexible pipe length to 336 ± 9 mm. * If the flexible pipe is tightened after extended, its sealing performance may lower and it may be disconnected. Take care.

If the flexible pipe needs to be shortened, shorten it while twisting it to the left. (Twisting distance: 3 – 5 mm) 2. Permanently tighten V-coupling (3) on the frame side.

Twisting distance to left: 3 – 5 mm Twisting distance to right: 0 mm

336±9

A

A-A A

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty 1

Other remarks

55

Assembly process No.

Installation of fire prevention cover

0300 Installation of fire prevention cover

<Point of work> * Install the fire prevention cover before installing the fender (for higher workability).

(1) (2) (3) (4)

Part No. 561-89-86111 561-89-86120 01024-81230 01024-81225

Part name Cover Cover Bolt, sems Bolt, sems

Q'ty 1 1 6 2

Condition of part (Parts list No.) Packed separately (HD785-7-300) Packed separately (HD785-7-300) Packed separately (HD785-7-300) Packed separately (HD785-7-300)

1. Install the fire prevention cover to the right rear support.

Precautions

Necessary tools Name

Other remarks

56

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of front support

0310 Installation of front support

Tightening torque:

3: 662 – 829 Nm {67.5 – 84.5 kgm}

Tightening torque: 3: 662 – 829 Nm {67.5 – 84.5 kgm}

Connection of headlamp wiring harness

(1) (2) (3) (4) (5) (6)

Part No. 561-54-80301 01010-82270 01643-32260 561-54-80401 01010-82255 01643-32260

Part name Front support sub-assembly L.H.

Bolt Washer Front support sub-assembly R.H.

Bolt Washer

Q'ty 1 11 11 1 5 5

Condition of part (Parts list No.) Packed separately (HD785-7-310) Packed separately (HD785-7-310) Packed separately (HD785-7-310) Packed separately (HD785-7-310) Packed separately (HD785-7-310) Packed separately (HD785-7-310)

1. Install front support assemblies (1) and (4) with bolts (2) and (5) and washers (3) and (6).

2. Fix the wiring harness to the clip and connect connector (CN-RP and CN-LP3).

3. After installing the front support, touch it up.

Precautions

Necessary tools Name Nylon sling (60 mm wide x 3 m) Torque wrench

Necessary equipment Q'ty Name Q'ty 1 Crane (25 ton) 1 1

Other remarks

57

Assembly process No.

0315

Installation of front support (Fog lamp specification: If equipped)

Installation of front support

3: 662 – 829 Nm {67.5 – 84.5 kgm}

Tighteningtorque:

Tightening torque: 3: 662 – 829 Nm {67.5 – 84.5 kgm}

Connection of headlamp wiring harness

(1) (2) (3) (4) (5) (6)

Part No. 561-54-80100 01010-82270 01643-32260 561-54-80200 01010-82255 01643-32260

Part name Front support sub-assembly L.H. Fog

Bolt Washer Front support sub-assembly R.H. Fog

Bolt Washer

Q'ty 1 11 11 1 5 5

Condition of part (Parts list No.) Packed separately (HD785-7-315) Packed separately (HD785-7-315) Packed separately (HD785-7-315) Packed separately (HD785-7-315) Packed separately (HD785-7-315) Packed separately (HD785-7-315)

1. Install front support assemblies (1) and (4) with bolts (2) and (5) and washers (3) and (6).

2. Fix the wiring harness to the clip and connect connector (CN-RP and CN-LP3).

3. After installing the front support, touch it up.

Precautions

Necessary tools Name Nylon sling (60 mm wide x 3 m) Torque wrench

Other remarks

58

Necessary equipment Q'ty Name Q'ty 1 Crane (25 ton) 1 1

Assembly process No.

0317

Installation of front support (Fog lamp, beacon lamp, HID headlamp specification: If equipped)

Installation of front support

Tightening torque: 3:

Tighten 3 : torque:

Connection of headlamp harness

(1) (2) (3) (4) (5) (6)

Part No. 561-85-80V00 01010-82270 01643-32260 561-85-80W00 01010-82255 01643-32260

Part name Front support sub-assembly L.H.

Bolt Washer Front support sub-assembly R.H.

Bolt Washer

Q'ty 1 11 11 1 5 5

Condition of part (Parts list No.) Packed separately (HD785-7-317) Packed separately (HD785-7-317) Packed separately (HD785-7-317) Packed separately (HD785-7-317) Packed separately (HD785-7-317) Packed separately (HD785-7-317)

1. Install front support assemblies (1) and (4) with bolts (2) and (5) and washers (3) and (6).

2. Fix the harness to the clips and connect connectors (CN-RP and CN-LP3).

3. After installing, touch up the damaged surfaces.

Precautions

Necessary tools Name Nylon sling (60 mm wide x 3 m) Torque wrench

Necessary equipment Q'ty Name Q'ty 1 Crane (25 ton) 1 1

Other remarks

59

Assembly process No.

Installation of steering valve

0320 Installation of steering valve 1. Remove the blind plugs and caps from the frame steering piping (5 places).

2. Install the steering valve to the left front support.

Tightening torque: 3 : 44.1 -- 58.8 Nm {4.5 -- 6.0 kgm}

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)

Part No. 561-40-83300 561-40-42620 561-40-42630 561-40-42650 02010-20638 01643-31032 569-40-83470 569-40-83480 01024-80616 01643-30623 01580-10605

Part name Valve,steering Cushion Collar Plate Bolt Washer Bracket Seal Bolt, sems Washer Nut

Q'ty 1 4 4 4 4 4 2 1 2 2 2

Condition of part (Parts list No.) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320)

3. Install the nipple to the steering valve.

View Z (12) (13) (14) (15) (16) (17)

Part No. 02896-21012 569-61-84770 437-40-22310 569-61-84780 418-62-11620 02896-21018

Part name O-ring Nipple O-ring Nipple O-ring O-ring

Precautions 1. Take care that the O-ring will not be projected.

Q'ty 1 2 2 2 2 4

Condition of part (Parts list No.) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Packed separately (HD785-7-320) Necessary tools Name

Other remarks

60

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Preparation for installing cab

0330 Preparation for installing cab 1. Adjust the dimensions between the viscous mounts with the left front support and rear support as shown below.

Dimension measuring method

Slinging of cab 1. Sling the cab assembly. (Use a sling having capacity of at least 3 ton.)

(1)

Part No. 561-54-83200 Precautions

Part name Cab assembly

Q'ty 1

Condition of part (Parts list No.) Packed separately (HD785-7-330)

Necessary tools Name Nylon sling (Capacity: Min. 3 ton)

Necessary equipment Q'ty Name Q'ty 1 Crane (50 ton) 1

Other remarks

61

Assembly procedure No.

Installation of cab

0340 Installation of cab Clearance (A) adjusted with shim (Standard: 0 mm)

Z

⑪ Section A-A

B

*After cab is installed, if clearance (A) is made, insert shims (7) and (8) by necessary quantity (up to 8 pieces for each place (t0.5 x 4, t1.0 x 4)). No shim may be used as standard.

A

* After the cab is mounted, if there is clearance (Standard: 0 mm), insert shims (4) as necessary [Number of shims prepared for each place: 4 (t1.0 x 4)]. No shim may be used as standard.

①②④⑨⑩ Tightening torque (1)： 245 - 309Nm ｛25 - 31.5kgm｝ Tightening torque (9)： 1,177 - 1,471 Nm ｛120 - 150kgm｝

⑫ ⑫

A

B

Connect View Z

⑤⑥⑦⑧ Tightening torque(5)： 490 - 608 Nm ｛50 - 62kgm}

FWD

Connect

⑫

Section B-B

1.Move the cab assembly to above the frame.

2.Remove parts (9) and (10) installed temporarily and then install the cab assembly with the following parts.

No. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10)

Part No. 01010-81645 01643-31645 561-54-87211 561-54-87221 01010-82055 01643-32060 561-54-87231 561-54-87243 01596-03024 01643-33080

Part Name Bolt Washer Shim t=0.5 Shim t=1.0 Bolt Washer Shim t=0.5 Shim t=1.0 Nut Washer

Q'ty 8 8 8 8 8 8 8 8 1 1

State of part (Parts list No.) Separately Packed （HD785-7-0340） Separately Packed （HD785-7-0340） Separately Packed （HD785-7-0340） Separately Packed （HD785-7-0340） Separately Packed （HD785-7-0340） Separately Packed （HD785-7-0340） Separately Packed （HD785-7-0340） Separately Packed （HD785-7-0340） Installed to frame Installed to frame

3. Remove the sling.

4. Connect the ground wire to the rear of the cab assembly

No. (11) (12)

Part No. 08028-45025 01024-81016

Part Name Cable Bolt, sems

Precautions 1. If there is clearance between the mount bracket and cab (clearance to be adjusted with shims), insert shims by necessary quantity (up to 8 pieces for each place).

2. The part to connect the ground wire must be free from stain or paint.

Q'ty 1 1

Necessary tools Name

Other remarks

62

State of part (Parts list No.) Installed to cab assembly Separately Packed （HD785-7-0340）

Q'ty

Necessary equipment Name

Q'ty

Assembly process No.

Connection of ABS piping (If equipped)

0345 Connection of ABS piping 1. Remove the plugs of each hose and tube.

2. Check that the correct O-ring is fitted to each tube and connect the hose on the ABS front box side.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

63

Assembly process No.

Connection of column

0350 Connection of column 1. Remove the bolt and washer and connect the column shaft to the steering valve.

2. Set the bolt removed in step 1 to the hollow of the steering valve joint and tighten it again.

(See section A-A.)

Remove these bolt and washer.

A A

Bolt Set bolt to this "hollow".

Steering valve Section A-A

Precautions 1. Apply grease (LM-G) to the connecting parts.

Necessary tools Name

2. When installing the parts, do not hit them with a hammer etc. or installing them forcibly.

Other remarks

64

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of washer tank

0355 Installation of washer tank

1. Take washer tank assembly (1) out of the cab and install it to the cab with bolts (2).

2. Fix washer hose (A) coming out of the cab with washer tank clips (marked with a) at 2 places so that it will not be flattened and then connect it to the washer tank.

3. Connect wiring harness (B) going to the washer motor to the washer tank. (CN FL04) 4. Fix washer hose (A) and wiring harness (B) going to the washer motor with band (3) at 80 mm from the bracket end (on the cab side) so that the hose will not be flattened.

(1) (2) (3)

Part No. 569-06-6115A 01024-81020 08034-40521

Part name Washer tank Bolt, sems Band

Precautions 1. When fixing the washer hose, take care not to flatten it.

Q'ty 1 4 1

Condition of part (Parts list No.) Packed together with cab Packed together with cab Packed together with cab

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

65

Assembly process No.

Connection of cab wiring

0370 Connection of cab wiring

Procedure for connecting wiring harness

CN LP2: Left platform wiring harness junction

Z (View from below cab) CN LP1: Left platform wiring harness junction

CN J01: Wiring harness junction in cab

CN J06: Wiring harness junction in cab CN J05: Wiring harness junction in cab

CN PMLA: PLM and side lamp wiring harness junction

CN J03: Wiring harness junction in cab CN J02: Wiring harness junction in cab

Z (View from below cab)

(1) (2) (3) (4) (5) (6) (7) (9) (10) (11) (12)

Part No. 04434-52711 01024-81020 08193-21012 01024-81016 23S-62-25850 6152-51-5520 01024-81070 04434-52110 07095-20420 561-61-65530 561-61-65540

Z (View from below cab)

Part name Clip Bolt, sems Clip Bolt, sems Clip Spacer Bolt, sems Clip Cushion Clip Insulator

Q'ty 3 4 1 1 1 1 1 1 1 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370) Packed separately (HD785-7-370)

1. Connect the wiring harness in the cab.

2. Install the cab undercover removed in the previous step.

3. Fix the bracket installed in the previous step.

Precautions

Necessary tools Name

Other remarks

66

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0375

Connection of cab wiring (ASR/ABS specification: If equipped)

Connection of cab wiring

CN LP2: Left platform wiring harness junction

Procedure for connecting wiring harness

CN J04: Wiring harness junction in cab CN LP1: Left platform wiring harness junction CN J06: Wiring harness junction in cab

Z (View from below cab)

CN J05: Wiring harness junction in cab

CN J01: Wiring harness junction in cab

CN J03: Wiring harness junction in cab

CN PMLA: PLM and side lamp wiring harness junction

CN J02: Wiring harness junction in cab

Z (View from below cab)

Z (View from below cab) : Fix lower wiring harness

Fix upper wiring harness :

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16)

Part No. 04434-52711 01024-81020 08193-21012 01024-81016 23S-62-25850 6152-51-5520 04434-52110 01024-81070 04434-52511 07095-20420 561-61-65530 561-61-65540 195-979-5190 04434-53411 07095-20625 01024-81075

Part name Clip Bolt, sems Clip Bolt, sems Clip Spacer Clip Bolt, sems Clip Cushion Clip Insulator Collar Clip Cushion Bolt, sems

Q'ty 3 3 4 4 1 1 1 1 1 1 1 1 1 1 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375) Packed separately (HD785-7-375)

1. Connect the wiring harness in the cab.

2. Install the cab undercover removed in the previous step.

3. Fix the bracket installed in the previous step.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

67

Assembly process No.

0376

Connection of engine prelubrication harness to cab (If equipped: Engine prelubrication specification)

Connection of engine prelubrication harness to cab 1. Fix the engine prelubrication harness to the cab and connect it to the harness on the cab side.

View X

View Z

Section B-B

Connect: Cab relay connector PRE4

: Tighten together at 3 places.

View Y: Underside of cab

Section A-A

(1) (2) (3) (4) (5)

Part No. 6131-22-3750 04434-51210 198-06-53510 01024-81045 04434-50810 Precautions

Part name Boss Clip Cushion Bolt, sems Clip

Q'ty 1 1 1 1 3

Condition of part (Parts list No.) Packed separately (HD785-7-376) Packed separately (HD785-7-376) Packed separately (HD785-7-376) Packed separately (HD785-7-376) Packed separately (HD785-7-376) Necessary tools Name

Other remarks

68

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Connection and fixing of engine compartment lamp wiring harness (if equipped)

0377

Connection and fixing of engine compartment lamp wiring harness Pass wiring harness into cab.

Mark a: 4 places (Tighten with clip)

View Z: Cab seen from below

CAB

Remove cover in cab.

Section A-A 1. Lay the engine compartment lamp wiring harness from the machine to under the cab and fix it with clips (1).

2. Pass the engine compartment wiring harness into the cab.

Remove the cover in the cab and connect the wiring harness to connector (SPARE4).

3. Install the cover in the cab again.

Connect: SPARE4

Inside of cab seen from front

(1)

Part No. 04434-50610 Precautions

Part name Clip

Q'ty 4

Condition of part (Parts list No.) Packed separately (HD785-7-377) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

69

Assembly process No.

0378

Connection of auto grease harness to cab (If equipped: Auto grease specification)

Connection of auto grease harness to cab 1. Fix the auto grease harness to the cab and connect it to the harness on the cab side.

For other specifications, remove mounting bolt and install with it.

Section A-A Connect: Harness on cab side

View Y

View Z

(1) (2) (3)

Part No. 04434-51210 01024-81020 561-95-83210 Precautions

Part name Clip Bolt, sems Bracket

Q'ty 1 2 1

Condition of part (Parts list No.) Packed separately (HD785-7-378) Packed separately (HD785-7-378) Packed separately (HD785-7-378) Necessary tools Name

Other remarks

70

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0379

Connection of engine stop harness to cab (If equipped: Engine emergency stop specification)

Connection of engine stop harness to cab 1. Fix the engine stop harness to the cab and connect it to the harness on the cab side.

Install together with main harness clip mounting bolt.

View Y

Install together with cab under harness clip mounting bolt.

: 8 places

Section A-A

Section B-B Install together with cab under harness clip mounting bolt.

Section C-C

Remove used for standard and install with it.

Section D-D : 2 places Install together with main harness clip mounting bolt.

Connect View Z

View X

(1) (2) (3) (4) (5)

Part No. 04434-50610 04434-51210 198-06-53510 01024-81020 08193-21012 Precautions

Part name Clip Clip Cushion Bolt, sems Clip

Q'ty 8 1 1 2 1

Condition of part (Parts list No.) Packed separately (HD785-7-379) Packed separately (HD785-7-379) Packed separately (HD785-7-379) Packed separately (HD785-7-379) Packed separately (HD785-7-379) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

71

Assembly process No.

Installation and fixing of steering hoses

0380 Installation and fixing of steering hoses 1. Remove the cover from the front support. Install the 5 hoses to the steering valve.

When installing the hoses, match the Nos. printed on them to the following figure.

Port P: "2"

Port LS

Port RT: "5" Port R: "1" Port LT: "4"

View Z

(1) (2) (3) (4) (5)

Part No. 02766-00423 561-61-82320 561-61-82350 561-61-82310 561-61-82340

Part name Hose Hose Hose Hose Hose

Q'ty 1 1 1 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-380) Packed separately (HD785-7-380) Packed separately (HD785-7-380) Packed separately (HD785-7-380) Packed separately (HD785-7-380)

Port R Port P Port LT

Port LS

Port RT

Port R: "1" Port P: "2" Port LS Port LT: "4" Port RT: "5"

(6) (7) (8) (9) (10)

Part No. 561-61-64510 561-61-64540 561-61-64530 561-61-64520 01024-81290 Precautions

Part name Clamp Plate Spacer Plate Bolt sems

2. Fix the 5 steering hoses to the front support.

3. Connect the hoses to the steering tubes of the frame.

4. Clean the parts stained with oil.

Q'ty 6 3 6 3 6

Condition of part (Parts list No.) Packed separately (HD785-7-380) Packed separately (HD785-7-380) Packed separately (HD785-7-380) Packed separately (HD785-7-380) Packed separately (HD785-7-380) Necessary tools Name

Other remarks

72

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Fixing of air conditioner drain hose

0385 Fixing of air conditioner drain hose

L.H.

1. Remove the cab undercover.

2. Remove wiring harness clamping bolts (2) of the front support L.H..

3. Install the air conditioner drain hose to the wiring harness clamping position of the front support L.H. with clip (1) and bolts (2) removed in step 1.

4. Remove bolts (5) installed in field assembly procedure No. 0380.

5. Install the 2 air conditioner drain hoses together with clips (3) and (4) and bolts (5) removed in step 3.

(1) (2) (3) (4) (5)

Part No. 04434-51510 01024-81016 04435-51510 04435-51810 01024-81290 Precautions

Part name Clip Bolt, sems Clip Clip Bolt, sems

Q'ty 2 2 1 1 2

Condition of part (Parts list No.) Packed in cab Installed to front support L.H. Packed in cab Packed in cab Installed in No. 0380 Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

73

Assembly process No.

Installation of steering hose cover

0390 Installation of steering hose cover

1. Install the cover over the steering piping of the left front support

(1) (2) (3) (4)

Part No. 561-54-81490 01024-81220 561-54-81580 01024-81220

Precautions

Part name Cover Bolt, sems Cover Bolt, sems

Q'ty 1 4 1 4

Condition of part (Parts list No.) Packed separately (HD785-7-390) Packed separately (HD785-7-390) Packed separately (HD785-7-390) Packed separately (HD785-7-390)

Necessary tools Name

Other remarks

74

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Connection of air conditioner and heater hoses

0395 Connection of air conditioner and heater hoses

1. Connect the 4 hoses to the cab piping.

2. Fix hose (d) going to the engine and hose (c) coming from the engine with clamps (1).

(1) (2)

Part No. 09479-02400 01024-81020 Precautions

Part name Clamp Bolt, sems

Q'ty 2 1

Condition of part (Parts list No.) Installed to hose Packed separately (HD785-7-395) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

75

Assembly process No.

Connection of cab floor wiring

0400 Connection of cab floor wiring 1. Remove the cover in the cab floor.

Inside of cab floor

X 2. Connect the wiring coming from the following figure (View Z) inside the cab floor. * Each wiring harness is printed with a connector No. Take care not to connect them wrongly.

Z

CN HM-21B Exhaust temperature sensor connector (RF)

CN HM-21A Exhaust temperature sensor connector (LF)

CN HM-21D Exhaust temperature sensor connector (RR)

View Z

(1)

Part No. 561-97-82250

Precautions

Part name Wiring harness

Connection

CN HM-22A

CN HM-23A

CN HM-22C

CN HM-23C

CN HM-22B

CN HM-23B

CN HM-22D

CN HM-23D

Q'ty 1

Inside of cab floor

Condition of parts Installed to frame

Necessary tools Name

Other remarks

76

View X

CN HM-21C Exhaust temperature sensor connector (LR)

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Fixing of ASR/ABS wiring harness (If equipped)

0405 Fixing of ASR/ABS wiring harness 1. Fix ASR/ABS wiring harness (1) to the cab with clip (1) and bolt (2).

2. Fix the connector with clip (3) and bolts (2). (CN J11)

CAB

X

Z

Fixing: CN J11

View X

CN ABSER: Ground

View Z

(1) (2) (3)

Part No. 04434-51910 01024-81016 08193-21012 Precautions

Part name Clip Bolt, sems Clip

Q'ty 1 2 1

Condition of part (Parts list No.) Packed separately (HD785-7-405) Packed separately (HD785-7-405) Packed separately (HD785-7-405) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

77

Assembly process No.

0406

Connection and fixing of ABS wiring harness (If equipped)

Connection and fixing of ABS wiring harness 1. Connect and fix the wiring harness with the installed clip and bolt.

X

ABS front box

View Z Wheel speed sensor wiring harness ABS/ASR wiring harness Fixing Connection and fixing: CN J11 Fixing

Section A-A

Precautions

Z View X

Necessary tools Name

Other remarks

78

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of cover under cab

0410 Installation of cover under cab FWD

A A

B

B

Z View Z

Directed to inside of cover

Directed to inside of cover

Section A-A

Section B-B Installed position of (5), (6) and (7)

View Z

1. Install seals (3) and (4) to cover (1).

2. Install the cover under the cab.

3. Fix the 2 hoses with clamps (5), cushions (6) and bolt (7).

(1) (2) (3) (4) (5) (6) (7)

Part No. 561-54-82141 01024-81020 569-54-82260 569-54-82290 07094-30620 07095-00628 01024-81270

Precautions

Part name Cover Bolt, sems Seal Seal Clamp Cushion Bolt, sems

Q'ty 1 9 1 1 2 2 1

Condition of part (Parts list No.) Packed separately (HD785-7-410) Packed separately (HD785-7-410) Packed separately (HD785-7-410) Packed separately (HD785-7-410) Packed separately (HD785-7-410) Packed separately (HD785-7-410) Packed separately (HD785-7-410)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

79

Assembly process No.

Wiring of front glass with heater wire (If equipped)

0415 a: 3 places

Installation of cab undercover

FWD

X

Z : 2 places (1 place: See view X)

: 3 places

CN BR-4 Connection : 2 places

View X

View Z

(Battery)

Connection: Secondary side (BR04)

1. Using clips (1) and bolts (2), connect the glass heater wiring harness coming from the cab.

2. Remove the bolts marked with a (3 places) and fix wiring harness with clips (1), collars (4) and bolts (5). (Discard the removed bolts.)

3. Open the battery box cover and connect the glass heater wiring harness to the battery relay. (View X) 4. Fix the wiring harness with bands (3) and (6).

(1) (2) (3) (4) (5) (6)

Part No. 04434-50610 01024-81016 08034-20823 22D-62-18450 01024-81055 08034-20519 Precautions

Part name Clip Bolt, sems Band Collar Bolt, sems Band

Q'ty 6 3 2 3 3 2

Condition of part (Parts list No.) Packed separately (HD785-7-415) Packed separately (HD785-7-415) Packed separately (HD785-7-415) Packed separately (HD785-7-415) Packed separately (HD785-7-415) Packed separately (HD785-7-415) Necessary tools Name

Other remarks

80

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of cab seal

0420 Installation of cab seal

Z

1. Stick seal (1) to the clearance between the cab and radiator guard.

(1) Degrease, clean and dry the seal sticking surface.

(2) Thinly apply adhesive (LT-1A) to the seal sticking surface and sticking surface on the right side of the cab. Dry the surfaces coated with the adhesive for 3 - 5 minutes and then stick the seal.

(1)

Part No. 561-54-61290

Precautions

Part name Seal

Q'ty 1

Condition of part (Parts list No.) Packed separately (HD785-7-420)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

81

Assembly process No.

0430

Installation of ambient temperature sensor wiring harness

Installation of ambient temperature sensor wiring harness

Connection: CN FL06

Front support (Left) Ambient temperature sensor wiring harness

1. Fix the wiring harness under the cab with clips (2) and bolts (3).

2. Fix the connector with clip (1) and bolts (3) and connect CN FL06. * Bolts (3) are those used in Assembly procedure No. 0480, however. Use them to fix the cab step, too.

(1) (2) (3)

Part No. 08193-21012 04434-50612 01024-81230

Precautions

Part name Clip Clip Bolt, sems

Q'ty 1 2 3

Condition of part (Parts list No.) Packed separately (HD785-7-430) Packed in cab Bolt (2) used in No. 0480

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code: 6HF55K (VHMS + PLM + ORB, overseas)

82

Assembly process No.

Installation of undercab wiring harness connector

0440 Installation of undercab wiring harness connector

Front support (Left)

1. Fix the wiring harness under the cab with clip (2) and bolts (3).

2. Fix the wiring harness with clip (1) and bolts (3) and connect connector (4) to its end. * Bolts (3) are those used in Assembly procedure No. 0480, however. Use them to fix the cab step, too.

(1) (2) (3) (4)

Part No. 08193-21012 04434-50612 01024-81225 08192-23830

Precautions

Part name Clip Clip Bolt, sems Connector

Q'ty 1 2 3 1

Condition of part (Parts list No.) Packed separately (HD785-7-440) Packed in cab Bolt (2) used in No. 0480 Packed separately (HD785-7-440)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

83

Assembly process No.

0445

Connection and fixing of rear view camera wiring harness (If equipped)

Connection and fixing of rear view camera wiring harness Camera cable

Wiring harness rail

2-stage connection 1) Tighten the connector with the fingers.

2) Using 2 17mm spanner wrench, rotate the outer ring 180 degrees.

Tighten to about 245 Nm {25 kgm} securely.

View X

Connect

View Y

Pass through backup lamp mounting hole and fix together with junction connector.

Section A-A

Section B-B

Section C-C

Mark a: 9 places Mark u: 11 places

View Z

(1) (2) (3) (4)

Part No. 120-54-42430 04434-50610 01024-81050 08034-20823

Part name Spacer Clip Bolt, sems Band

Q'ty 9 9 9 11

Condition of part (Parts list No.) Installed temporarily to machine Installed temporarily to machine Installed temporarily to machine Packed separately (HD785-7-445)

1. Pull the camera cable out of the cab. (See view Z.) 2. Remove the wire harness rail cover and fix the camera cable with clips (2) installed temporarily.

3. Connect the rear view camera and camera cable and fix the wire harness with bands (4).

Precautions

Necessary tools Name 17mm spanner wrench

Other remarks

84

Q'ty 1

Necessary equipment Name Q'ty

Assembly procedure No.

Installation of hand rail and mirror to the R.H. platform assembly

0451 Installation of R.H. platform assembly 1. Install the hand rail.

2. Install the mirror to the hand rail.

3. Adjust the angle of the mirror. ( See View Z )

②

①

Tightening torque ： 59 - 74Nm ｛6 - 7.5kgm｝

③④⑤⑥

Ｚ

52°

323

FWD

View Z

Tightening torque ： 59 - 74Nm ｛6 - 7.5kgm｝

③④⑤⑥ No. (1) (2) (3) (4) (5) (6)

Part No. 561-54-8175A 561-54-8178A 561-54-80900 07283-33442 01643-31032 01597-01009

Precautions

Part Name Guard assembly Guard assembly Mirror & rail assembly Clip Washer Nut

Necessary tools Name

Q'ty 1 1 2 4 8 8

State of part (Parts list No.) Separately Packed （HD785-7-468） Separately Packed （HD785-7-468） Separately Packed （HD785-7-464） Separately Packed （HD785-7-464） Separately Packed （HD785-7-464） Separately Packed （HD785-7-464）

Q'ty

Necessary equipment Name

Q'ty

Other remarks

85

Assembly process No.

Installation of right fender

0470 Installation of right fender

PLAT FORM R.H.

Set glossy side toward front of machine.

1. Install the right fender.

2. Install the guard to the right fender.

• Remove guard mounting plate and bolts installed to fender assembly.

• Install the guard with the removed plate and bolts.

3 : 29.4 – 49.0 Nm {3 – 5 kgm} Tightening torque: 29.4 - 49.0 Nm {3 - 5 kgm｝

(1) (2) (3)

Part No. X251043130 01024-81230 561-54-87420

Part name Fender R.H. Bolt sems Guard

Precautions Install guard (3) with its glossy side toward the front of the machine.

Q'ty 1 6 1

Condition of part (Parts list No.) Packed separately (HD785-7-470) Packed separately (HD785-7-470) Packed separately (HD785-7-470)

Necessary tools Name

Other remarks

86

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0472

Installation of right fender (If equipped: Body heating-less muffler specification)

Installation of right fender

: 6 places

• Remove the plate and bolts for the guard installed to the fender assembly temporarily.

• Install the right fender with the removed plate and bolts.

Tightening torque: 29.4 - 49.0 Nm {3 - 5 kgm} • Install the fender with the glossy side toward front of machine.

(1) (2) (3) (4)

Part No. X251039700 01024-81225 01024-81225 561-54-87420

Precautions

Part name Fender R.H. Bolt, sems Bolt, sems Guard

Q'ty 1 6 2 1

Condition of part (Parts list No.) Packed separately (HD785-7-472) Installed to fender Packed separately (HD785-7-472) Packed separately (HD785-7-472)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

87

Assembly process No.

0475

Installation of fuel tank quick charge-less hose (If equipped)

Installation of fuel tank quick charge-less hose Right fender

View X

Fuel tank

Fire prevention cover View Z

* To be installed to fire prevention cover.

: 3 places

Detail of part P

1. Fix bracket (1) to the fire prevention cover with bolts (2) installed to the fire prevention cover.

(2 places) 2. Fix the hose going to the fuel tank breather to the bracket with clips (4) and bolts (5). (2 places) 3. Install cover (3) to the fire prevention cover with bolts (6).

4. Fix the hose going to the fuel tank breather to cover (3) with clip (4) and bolt (5). (1 place) (1) (2) (3) (4) (5) (6) (7)

Part No. 561-04-81530 01024-81020 561-04-81540 04434-51210 01024-81020 01024-81040 01024-81016 Precautions

Part name Bracket Bolt, sems Cover Clip Bolt, sems Bolt, sems Bolt, sems

Q'ty 2 4 1 5 3 2 2

Condition of parts Packed separately (HD785-7-475) Packed separately (HD785-7-475) Packed separately (HD785-7-475) Packed separately (HD785-7-475) Packed separately (HD785-7-475) Packed separately (HD785-7-475) Packed separately (HD785-7-475) Necessary tools Name

Other remarks

88

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0476

Installation of fuel tank quick chargeless hose: Muffler specification (If equipped: muffler specification)

Installation of fuel tank quick chargeless hose

Rear support

Right fender

Fuel tank

View X

View Y

* To be installed to rear support.

L-plate

Detail of part Q

View Z

View P

Bolt

Bolt

1. Remove the L-plate and 2 bolts. (See view P.) 2. Install cover (1) and the hose going together to the fuel tank breather to rear support (1) with clips (2) and bolts (3). (See views Y and Q.) 3. Fix the hose going to the fuel tank breather with clips (7) and bolts (8). (3 places. See views X and Z.) 4. Install cover (4) with bolts (5) and (6). (See view Y.) (1) (2) (3) (4) (5) (6) (7) (8)

Part No. 561-04-81550 04434-51212 01024-81260 561-04-81560 01024-81045 01024-81035 04434-51210 01024-81016 Precautions

Part name Cover Clip Bolt, sems Cover Bolt, sems Bolt, sems Clip Bolt, sems

Q'ty 1 2 2 1 1 1 3 3

Condition of part (Parts list No.) Packed separately (HD785-7-476) Packed separately (HD785-7-476) Packed separately (HD785-7-476) Packed separately (HD785-7-476) Packed separately (HD785-7-476) Packed separately (HD785-7-476) Packed separately (HD785-7-476) Packed separately (HD785-7-476) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

89

Assembly procedure No.

Assembly of diagonal ladder (If equipped)

0481 Fig.1

Assembly of diagonal ladder 1. Install handrail to ladder and platform. * When installing clamp (10), see "Fig. 1".

Up

Set edge side up.

② Set rear side down.

① ⑩⑪⑫

Photo of clamp (3)

⑧

★ marks： 10 places

⑦

⑥

⑨

③④

⑤ ⑬⑭ (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14)

Part No.

Part Name

Q'ty

561-89-86911 561-89-86950 561-89-86810 01024-81025 561-89-86933 561-89-86961 561-89-86920 561-89－86970 561-89-86991 561-54-61910 01643-31645 01010-81635 561-89-85990 01024-81025

Step Guard Plate Bolt, sems Step Guard Step Guard Guard Clamp Washer Bolt Plate Bolt, sems

1 1 1 2 1 1 1 1 1 10 20 20 1 2

Precautions

State of part (Parts list No.) Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481） Separately Packed （HD785-7-481）

Necessary tools Name

Other remarks

Sales code : 6HB55-E

90

Q'ty

Necessary equipment Name

Q'ty

Assembly procedure No.

0482

Installation of cab step: Diagonal ladder specification (If equipped)

Installation of side cab step 1. Install the step assembly to the left side of the cab.

CAB

Only machine equipped with radio

① ②

Remove paint from radio antenna ground part (Remove paint from ground part on left platform side, too).

Remove masking tape.

(1) (2)

Part No. X251787672 01024-81225

Part Name Q'ty State of part (Parts list No.) Side cab step assembly 1 Separately Packed （HD785-7-482） Bolt 8 Separately Packed （HD785-7-482）

Installation of front cab step 1. Install the step assembly to the front side of the cab.

A

⑥⑦⑧

④

Detail of part A

③ ④

(3) (4) (5) (6) (7) (8)

Part No. 561-54-8B300 01024-81230 01024-81250 01024-81245 01643-31232 01580-11210 Precautions

Part Name Step assembly Bolt, sems Bolt, sems Bolt, sems Washer Nut

Q'ty 1 14 2 1 1 1

⑤

State of part (Parts list No.) Separately Packed （HD785-7-481） Separately Packed （HD785-7-482） Separately Packed （HD785-7-482） Separately Packed （HD785-7-482） Separately Packed （HD785-7-482） Separately Packed （HD785-7-482）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Q'ty

1

Necessary equipment Name

Crane （25 ton）

Q'ty

1

Other remarks

Sales code : 6HB55-E

91

Assembly procedure No.

Installation of diagonal ladder 1 (If equipped)

0483 Installation of diagonal ladder 1 1. Install the step assembly to the front side of the cab.

A

2. Install the rod.

B A B

①

55° Tightening torque (10): 490 – 608 Nm {50 – 62 kgm}

② ③ ④

FWD

⑥

FWD

⑤ ④

⑥

⑧

⑦

* 2 places Other than rod (11)

Section A-A

* 2 places

No. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)

Part No. 561-89-8693A 01011-82015 566-54-21931 566-54-21920 566-54-12212 566-54-21910 01643-32060 01580-12016 01597-02016 01583-12012 561-89-6A970

Precautions

⑦

⑪

Section B-B

Part Name Step assembly Bolt Plate Plate Cushion Bushing Washer Nut Nut Nut Rod

Q'ty 1 2 2 8 8 4 6 2 2 4 1

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Other remarks

Sales code : 6HB55-E

92

④ ⑤ ④ ⑩

⑨ ⑦

State of part (Parts list No.) See field assembly procedure No.0481.

Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483） Separately Packed （HD785-7-483）

Q'ty

1

Necessary equipment Name

Crane （25 ton）

Q'ty

1

Assembly procedure No.

Installation of diagonal ladder 2 (If equipped)

0484 Installation of diagonal ladder 2 1.Install the step assembly to the front side of the cab.

③④⑤

A

⑥

B

⑨⑩ ⑦⑧ ③④⑤ ①

⑪ Detail of part A

② No. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)

Part No. 561-89-8581A 01024-81230 01024-81245 01643-31232 01580-11210 561-89-8A780 07283-32236 07283-52232 01643-31032 01597-01009 569-54-8C330

Precautions

Detail of part B Part Name Step assembly Bolt, sems Bolt, sems Washer Nut Stay Clip Seat Washer Nut Mirror

Q'ty 1 6 2 2 2 1 2 2 4 4 1

State of part (Parts list No.) See field assembly procedure No.0481.

Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484） Separately Packed （HD785-7-484）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Q'ty

1

Necessary equipment Name

Crane （25 ton）

Q'ty

1

Other remarks

Sales code : 6HB55-E

93

Assembly procedure No.

Installation of diagonal ladder 3 (If equipped)

0485 Installation of diagonal ladder 3 1.Install the step assembly to the front side of the cab.

No. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)

Part No. 561-89-8582A 01010-81635 01643-31645 01011-82015 566-54-21931 566-54-21920 566-54-12212 566-54-21910 01643-32060 01580-12016 09415-03614

Part Name Step assembly Bolt Washer Bolt Plate Plate Cushion Bushing Washer Nut Cap

Q'ty State of part (Parts list No.) 1 See field assembly procedure No. 0481.

6 Separately Packed （HD785-7-485） 6 Separately Packed （HD785-7-485） 2 Separately Packed （HD785-7-485） 2 Separately Packed （HD785-7-485） 4 Separately Packed （HD785-7-485） 4 Separately Packed （HD785-7-485） 2 Separately Packed （HD785-7-485） 2 Separately Packed （HD785-7-485） 2 Separately Packed （HD785-7-485） 2 Separately Packed （HD785-7-485）

⑪ ④ ⑤ * 2 places

⑦

⑧

⑥ Section A-A

⑨

⑩ A

① ⑬ ⑫

A

Ｚ View Z

Installation of step 1. Install the step assembly to the front side of the cab.

No. (12) (13)

Part No. 561-54-88201 01024-81235

Cautions

Part Name Step Bolt, sems

Q'ty 1 4

②③ State of part (Parts list No.) Separately Packed （HD785-7-485） Separately Packed （HD785-7-485）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Other remarks

Sales code : 6HB55-E

94

Q’ty

1

Necessary Equipment Name

Crane （25 ton）

Q’ty

1

Assembly procedure No.

Installation of cab step

0489 Only machine equipped with radio

①

② CAB A Scrape paint off ground part for radio antenna (Scrape paint off on left platform side, too).

Z Peel off masking tape Detail of part A

④

⑦⑧⑨

View Installation of front cab step 1. Install the guard to the front side of the cab.

No. (1)

Part No. 561-54-81772

⑥

⑤

Z

Part Name Guard

③ Q'ty State of part (Parts list No.) 1 Separately Packed （HD785-7-486）

Installation of side cab step 1. Install the step assembly to the left side of the cab.

No. (2) (3) (4) (5) (6) (7) (8) (9)

Part No. X251787672 01024-81225 01024-81230 01024-81235 01024-81250 01024-81245 01643-31232 01580-11210 Precautions

Part Name Side sub-step assembly Bolt Bolt, sems Bolt Bolt, sems Bolt, sems Washer Nut

Q'ty 1 6 2 2 2 1 1 1

State of part (Parts list No.) Separately Packed （HD785-7-486） Separately Packed （HD785-7-486） Separately Packed （HD785-7-486） Separately Packed （HD785-7-486） Separately Packed （HD785-7-486） Separately Packed （HD785-7-486） Separately Packed （HD785-7-486） Separately Packed （HD785-7-486）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Q'ty

1

Necessary equipment Name

Crane （25 ton）

Q'ty

1

Other remarks

95

Assembly procedure No.

Installation of L.H. under view mirror (If equipped)

0491 Z

Installation of L.H. under view mirror

① ②

③④⑤⑥

1. Install the under view mirror to the cab step.

2. Adjust the angle of the mirror.

20°

View Z

No. (1) (2) (3) (4) (5) (6)

Part No. 569-54-8C330 561-54-8A880 07283-32236 07283-52232 01597-01009 01643-31032

Precautions

Part Name Mirror Stay Clip Seat Nut Washer

Q'ty 1 1 2 2 4 4

Necessary tools Name

Other remarks

96

State of part (Parts list No.) Separately Packed （HD785-7-490） Separately Packed （HD785-7-490） Separately Packed （HD785-7-490） Separately Packed （HD785-7-490） Separately Packed （HD785-7-490） Separately Packed （HD785-7-490）

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of fire extinguisher (If equipped)

0500 Installation of fire extinguisher (If equipped)

1. Remove the temporarily installed bolts and install fire extinguisher (1) with bolts (2).

(1) (2)

Part No. 09495-00000 01435-00616

Precautions

Part name Extinguisher Bolt

Q'ty 1 4

Condition of part (Parts list No.) Packed separately (HD785-7-500) Packed separately (HD785-7-500)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code: 6ZZ01

97

Assembly procedure No.

Installing radio antenna and fixing its cable

0511 Perform this work only when the radio is installed.

⑥⑤

④⑪ ⑦

FWD

① ②

Detail of View Z

⑩

⑧⑨

③ ⑤⑥ Bind connector and cable

⑤⑥ L.H. platform assembly

Connect

ZZ No. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11)

Part No. 561-54-87480 01225-40412 01023-10414 07270-51514 04434-51910 01435-01016 08037-11825 561-54-8A840 01435-01016 08037-01008 08210-00610

Part Name Antenna Screw Screw Tube Clip Bolt Grommet Cover Bolt Grommet Spiral tube

Q'ty 1 1 1 1 6 6 1 1 2 1 1

State of part (Parts list No.) Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511） Separately Packed （HD785-7-511）

1. Install antenna (1) to the handrail installed to the L.H. platform assembly as shown in the above figure.

2. Connect the antenna cable coming from the cab to the cable coming from the antenna.

3. Fix the cable with the other parts as shown in the above figure.

Precautions

Necessary tools Name

Other remarks

98

Q'ty

Necessary equipment Name

Q'ty

Assembly process No.

Installation of L.H. fender

0520 Installation of L.H. fender

Installed to

Set glossy side toward front of machine.

(1) (2) (3)

Part No. X251042740 01024-81230 561-54-87410

Part name Fender L.H. Bolt sems Guard

Q'ty 1 6 1

Condition of part (Parts list No.) Packed separately (HD785-7-520) Packed separately (HD785-7-520) Packed separately (HD785-7-520)

1. Install the left fender.

2. Remove the bolts and plate installed temporarily to the left fender.

3. Install the guard with the bolts and plate removed in 2.

(Install the guard with its glossy side toward the front of the machine.)

4. Tighten the guard mounting bolts to 29.4 â&#x20AC;&#x201C; 49.0 Nm {3 â&#x20AC;&#x201C; 5 kgm}.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

99

Assembly process No.

Installation of left side mudguard

0530 Installation of left side mudguard

View from inside of cab

Z

3 torque(6): : 29.4 -- 49.0 Nm {3 -- 5 kgm} Tightening 29.4 - 49.0 Nm {3 - 5 kgmď˝? r: 3 places

a: 6 places

View Z

1. Install the left side mudguard.

(1) (2) (3) (4) (5) (6) (7) (8)

Part No. 561-54-86670 01024-D1025 561-54-86820 01024-D1220 569-54-81571 01024-D1030 417-43-16210 283-54-11470

Part name Bracket Bolt, sems Bracket Bolt, sems Guard Bolt, sems Washer Plate

Q'ty 1 2 1 3 1 6 2 2

Condition of part (Parts list No.) Packed separately (HD785-7-530) Packed separately (HD785-7-530) Packed separately (HD785-7-530) Packed separately (HD785-7-530) Packed separately (HD785-7-530) Packed separately (HD785-7-530) Packed separately (HD785-7-530) Packed separately (HD785-7-530)

1. Install the left side mudguard.

Precautions

Necessary tools Name

Other remarks

100

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of grille guard

0540 Installation of grille guard

(1)

Part No. 561-54-81763

Part name Guard

Q'ty 1

Condition of part (Parts list No.) Packed separately (HD785-7-540)

1. Remove the bolts installed temporarily to the grille.

2. Sling and move the guard over the grille.

3. Install the guard with the removed bolts.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

101

Assembly process No.

Installation of left payload lamp (If equipped)

0550 Installation of left payload lamp 1. Install the payload lamp wiring harness to the rear of the cab.

2. Fix the wiring harness to the bottom of the cab.

3. Connect the payload lamp wiring harness to the frame wiring harness 4. If the side lamp is not installed, bind and fix the wiring harness with band (13).

Cab seen from rear

View Z Fix together with main wiring harness.

Connection: CN.PMLA

Cab seen from below

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (12) (13)

Part No. 561-86-80100 569-86-87321 01024-81020 421-62-23710 421-62-18550 175-54-34170 01010-81235 561-86-87522 04434-50810 04434-51010 01024-81016 08034-20834 Precautions

Part name Q'ty PLM lamp sub-assembly L.H. 1 Bracket 1 Bolt, sems 3 Cushion 4 Cushion 4 Washer 4 Bolt 4 Wiring harness 1 Clip 5 Clip 1 Bolt, sems 4 Band 1

Necessary tools Name

Other remarks

102

Condition of part (Parts list No.) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550) Packed separately (HD785-7-550)

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of left side lamp (If equipped)

0555 Installation of left side lamp 1. Install side lamp wiring harness (1) to the rear of the cab.

2. Fix the wiring harness to the rear and underside of the cab.

3. Connect the wiring harness to the main wiring harness. (Connection: PMLA)

Fix together with main wiring harness.

Connection: CN. PMLA

Bottom view

(1) (2) (3)

Part No. 561-85-81211 04434-50810 01024-81016

Precautions

Part name Wiring harness Clip Bolt, sems

Q'ty 1 5 3

Condition of part (Parts list No.) Packed separately (HD785-7-555) Packed separately (HD785-7-555) Packed separately (HD785-7-555)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code: 5AC11 (EC Regulations)

103

Assembly process No.

Installation of right payload lamp (If equipped)

0560 Installation of right payload lamp 1. Install the payload lamp wiring harness to the right platform.

2. Remove the bolts marked with a on the right platform (3 places) and fix the wiring harness with them.

Fix the other parts of the wiring harness, too.

3. Connect the payload lamp wiring harness to the frame wiring harness 4. If the side lamp is not installed, bind and fix the wiring harness with band (10).

Red

Orange

Green

View Y

Right platform seen from rear

Tightening torque: 3

59 --74 Nm {6 -- 7.5 kgm}

Connection: CN.PMRA

View Z

Right platform see from above

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15)

Part No. 561-86-80201 421-62-23710 421-62-18550 175-54-34170 01010-81235 561-86-87531 01024-81016 04434-50810 08193-21012 08034-20834 561-54-86541 01024-81025 07283-33442 01643-31032 01597-01009 Precautions

Part name Q'ty PLM lamp sub-assembly R.H. 1 Cushion 4 Cushion 4 Washer 4 Bolt 4 Wiring harness 1 Bolt, sems 2 Clip 7 Clip 1 Band 1 Cover 1 Bolt, sems 3 Clip 2 Washer 4 Nut 4

Necessary tools Name

Other remarks

104

Condition of part (Parts list No.) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Packed separately (HD785-7-560) Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of right side lamp (If equipped)

0565 Installation of right side lamp

Tightening torque: 3 : 59 -- 74 Nm {6 -- 7 kgm}

1. Connect side lamp wiring harness (1).

(Connection: PMRA) 2. Fix wiring harness (1) with clip (3) and bolt (2).

3. Fix cover (6) and wiring harness (1) together with clip (3) and bolt (4).

4. Fix cover (6) and guard with clip (7), washer (8) and nut (9).

Right platform

Connection: CN-PMRA

(1) (2) (3) (4) (5) (6) (7) (8) (9)

Part No. 561-85-81220 01024-81016 04434-50810 01024-81025 08193-21012 561-54-86541 07283-33442 01643-31032 01597-01009

Precautions

Part name Wiring harness Bolt, sems Clip Bolt, sems Clip Cover Clip Washer Nut

Q'ty 1 1 4 3 1 1 2 4 4

Condition of part (Parts list No.) Packed separately (HD785-7-565) Packed separately (HD785-7-565) Packed separately (HD785-7-565) Packed separately (HD785-7-565) Packed separately (HD785-7-565) Packed separately (HD785-7-565) Packed separately (HD785-7-565) Packed separately (HD785-7-565) Packed separately (HD785-7-565)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code: 5AC11 (EC Regulations)

105

Assembly process No.

0570

Installation of left fender side lamp wiring harness (If equipped)

Installation of left fender side lamp wiring harness 1. Remove the cover installed to the fender temporarily.

2. Remove the lamp cover and connect the wiring harness. (Side lamp wiring harness: CN. SLL) 3. Fix the side lamp wiring harness with the clips and bolts installed to the fender temporarily.

4. Install the cover removed in steps 1 and 2 again.

Fix with clips and bolts installed temporarily.

Connection: SLL

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code: 5AC11 (EC Regulations)

106

Assembly process No.

0580

Installation of right fender side lamp wiring harness (If equipped)

Installation of right fender

PLAT FORM R.H.

Z (1) (2) (3) (4) (5) (6)

Part No. 04434-50810 01024-81016 561-85-81170 01024-81020 561-85-81180 01024-81035

Part name Clip Bolt, sems Cover Bolt, sems Cover Bolt, sems

Q'ty 2 2 1 2 1 2

1. Remove the cover installed to the fender temporarily.

2. Remove the lamp cover and connect the wiring harness. (Side lamp wiring harness: CN. SLR) 3. Fix the side lamp wiring harness with the clips and bolts installed to the fender temporarily and clips (1) and bolts (2).

4. Install cover (5) with bolts (6).

5. Install the covers removed in steps 1 and 2 again.

Condition of part (Parts list No.) Packed separately (HD785-7-580) Packed separately (HD785-7-580) Installed temporarily to right fender Installed temporarily to right fender Packed separately (HD785-7-580) Packed separately (HD785-7-580)

View Z

Connection: SLR

Fix with clips and bolts installed temporarily.

Reinstallation of cover Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code: 5AC11 (EC Regulations)

107

Assembly process No.

0581

Installation of right fender side lamp wiring harness (If equipped: Body heating-less muffler, exhaust gas selector box muffler specification)

Installation of right fender

PLAT FORM R.H.

Z (1) (2) (3) (4) (5)

Part No. 561-84-81250 561-84-84250 04434-50810 01024-81016 01024-81045

Part name Cover Cover Clip Bolt, sems Bolt, sems

Q'ty 1 4 4 2 4

1. Remove the cover, clips and bolts installed to the fender temporarily.

2. Remove the lamp cover and connect the wiring harness. (Side lamp wiring harness: CN. SLR) 3. Pass clips 3 through the side lamp wiring harness. Fix the wiring harness with the clips and bolts removed in step 1.

4. Install cover (1) and clips together with bolts (5).

5. Install cover (2) with bolts (5).

6. Install the cover removed in steps 1 again together with the clips.

Precautions

Condition of part (Parts list No.) Packed separately (HD785-7-581) Packed separately (HD785-7-581) Packed separately (HD785-7-581) Packed separately (HD785-7-581) Packed separately (HD785-7-581)

Connection: SLR

View Z

Reinstallation of cover

View Z

Necessary tools Name

Other remarks

108

Fix with clips and bolts installed temporarily.

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of KOMTRAX (If equipped)

0590 Installation of KOMTRAX Tightening torque: 3 : 59 -- 74 Nm {6 -- 7 kgm}

Tightening torque: 3 : 59 -- 74 Nm Apply LT-2 to threaded part.

{6 -- 7 kgm}

Right handrail

Cable supplied with cab (561-97-62250)

= 5 places

Z

Detail of assembly of antenna

Tightening 3 : 59 --torque: 74 Nm 59 -74 Nm {6 -- 7 kgm}

Right platform

Detail of fixing of pole (2 places)

View Z 1. Install the KOMTRAX antenna as shown above.

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)

Part No. 561-97-82141 01010-81635 01643-31645 8A13-10-2100 561-97-62250 561-97-62150 07283-33442 07283-36155 01597-01009 01643-31032 04434-50610 01024-81016

Part name Pole Bolt Washer Antenna, orbcomm Antenna, cable Plate Clip Clip Nut Washer Clip Bolt, sems

Q'ty 1 2 2 1 1 2 4 2 12 12 5 5

Precautions

Condition of part (Parts list No.) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Packed separately (HD785-7-590) Necessary tools Name

LT-2

Q'ty 1

Necessary equipment Name Q'ty

Other remarks

109

Assembly process No.

Fixing of ORBCOMM antenna (If equipped)

0595 Fixing of ORBCOMM antenna

= 20 places

View Z

View Y

= 7 places

= 2 places

= 4 places

View X

Bind excessive part of antenna cable together with electrical intake air heater wiring harness.

1. Fix the wiring harnesses with clips (1) in the order of the above numbers. Fix them together at places where bolts (2) are not used. Fix Nos. 6 â&#x20AC;&#x201C; 12 with spacers (5) and bolts (6) and (7).

2. After fixing the wiring harness, bind it with bands (3) and (4).

3. Bind the excessive part of the antenna cable together with electrical intake air heater wiring harness between Nos. 19 and 20.

(1) (2) (3) (4) (5) (6) (7)

Part No. 04434-50610 01024-81016 08034-20823 08034-20519 175-79-83760 01024-81045 01024-81040 Precautions

Part name Clip Bolt, sems Band Band Spacer Bolt, sems Bolt, sems

Q'ty 20 4 1 3 8 7 1

Condition of part (Parts list No.) Packed separately (HD785-7-595) Packed separately (HD785-7-595) Packed separately (HD785-7-595) Packed separately (HD785-7-595) Packed separately (HD785-7-595) Packed separately (HD785-7-595) Packed separately (HD785-7-595) Necessary tools Name

Other remarks

110

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

0597

Connection and fixing of harness and hose going to auto grease pump - 1 (If equipped: Auto grease specification)

Connection and fixing of harness and hose going to auto grease pump - 1 1. Fix the harness and hose going to the auto grease pump with the parts installed temporarily to the right platform.

View Y

(When ORBCOMM antenna is installed) (When payload meter and ORBCOMM antenna are installed)

(When payload meter and ORBCOMM antenna are installed)

(When ORBCOMM antenna is installed)

(When payload meter is installed)

Section CA-CA Section BM-BM

(1) (2) (3) (4) (5) (6) (7)

Part No. 04434-51210 01024-81075 154-06-34790 01024-81095 175-79-83760 04434-52712 07095-20420

: 5 places

Part name Clip Bolt, sems Spacer Bolt, sems Spacer Clip Cushion

Q'ty 6 6 6 6 6 5 5

Precautions

(When payload meter is installed)

Condition of part (Parts list No.) Installed to right platform Installed to right platform Installed to right platform Installed to right platform Installed to right platform Installed to right platform Installed to right platform Necessary tools Name

LT-2

Q'ty 1

Necessary equipment Name Q'ty

Other remarks

111

Assembly process No.

Connection and fixing of harness and hose going to auto grease pump - 2 (If equipped: Auto grease specification)

0598

Connection and fixing of harness and hose going to auto grease pump - 2 1. Fix the harness and hose going to the auto grease pump with the parts installed temporarily to the right platform.

2. Connect the auto grease hose to the pump.

View WW

Connect

View Y

(When ORBCOMM antenna is installed)

(When payload meter and ORBCOMM antenna are installed)

Connect: GREASE PUMP A CONNECTOR

Connect:

PRESSURE SWITCH CONNECTOR

Section CD-CD Section CC-CC (When payload meter is installed)

Section CB-CB

(1) (2) (3) (4) (5) (6) (7) (8) (9)

Part No. 04434-51210 01024-81075 154-06-34790 01024-81085 561-46-43390 04434-52712 07095-20420 01024-81016 02896-21012 Precautions

Part name Clip Bolt, sems Spacer Bolt, sems Spacer Clip Cushion Bolt, sems O-ring

Q'ty 2 1 1 1 1 1 1 1 1

Condition of part (Parts list No.) Installed to right platform Installed to right platform Installed to right platform Installed to right platform Installed to right platform Installed to right platform Installed to right platform Installed to right platform Packed separately (HD785-7-598) Necessary tools Name

Other remarks

112

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Removal of hoist cylinder fixing bracket

0600 Removal of hoist cylinder fixing bracket

Hoist cylinder fixing jig Hoist cylinder

Right side of machine

Hoist cylinder

Hoist cylinder fixing jig

Left side of machine

1. Remove the right and left hoist cylinder fixing jigs and secure them with lever blocks.

2. Discard the jigs removed in step 1 above.

Precautions

Necessary tools Name Torque wrench

Q'ty 1

Necessary equipment Name Q'ty

Other remarks

113

Assembly process No.

Connection of hoist cylinder piping

0610 Connection of hoist cylinder piping 1. Remove hoist cylinder mounting bolts A and B and remove the parts marked with A. Since the parts marked with A are not used any more, discard them.

Hoist cylinder

A

A Reused

A

B (1) (2) (3) (4) (5)

Reused

Part No. 07372-21035 07000-F3038 01024-80845 07000-F3030 01643-51032

Part name Bolt O-ring Bolt O-ring Washer

Q'ty 8 2 8 2 8

Condition of part (Parts list No.) Packed separately (HD785-7-610) Packed separately (HD785-7-610) Packed separately (HD785-7-610) Packed separately (HD785-7-610) Packed separately (HD785-7-610)

2. Using bolt (1) and washer (5) instead of bolt (A) and using bolt (3) instead of bolt B, reconnect the hose.

When reconnecting the hose, use O-rings (2) and (4) supplied loose.

Precautions 1. When installing the piping, take care that O-ring will not be caught.

2. If the engine is started after this process is completed, the cylinder is extended automatically.

Necessary tools Name

Other remarks

114

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Welding of body

0620 Welding of body

* For details of welding of body, see the separate manual.

(1)

Part No. 561-74-81102

Precautions

Part name Body U., assembly

Q'ty 1

Condition of part (Parts list No.) Packed separately (HD785-7-620)

Necessary tools Name Port power (300 mm for 10 ton) Hydraulic jack (10 ton) Hydraulic jack (5 ton)

Necessary equipment Q'ty Name Q'ty 1 Cranes (50 ton, 25 ton) 1 each

1 1

Other remarks

115

Assembly process No.

Sticking of body decal

0630 Sticking of body decal

Left side of body

Right side of body 1. Stick the decals to the body.

(1) (2) (3)

Part No. 561-93-81320 561-93-81310 561-93-81360

Part name Mark Mark Mark

Precautions 1. Eliminate blisters and fit each decal perfectly.

2. Remove all the oil and dust from the surfaces to stick the decals.

3. Stick the decal before installing the body.

Q'ty 2 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-630) Packed separately (HD785-7-630) Packed separately (HD785-7-630)

Necessary tools Name

Other remarks

116

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Supply of oil

0640 Supply of oil * Referring to No. 0010, check the types of oil and supply proper oil. * Before starting the engine, be sure to check the oil level in the brake oil tank. If the level is low, add new oil.

1. Before starting the engine, add oil through the filler tube of the transmission case to the H level and then add oil through the oil filler of the brake oil tank to the top (36 liters).

2. After starting the engine, run the engine at low idle and add oil until the oil pressure gauge indicates the maximum.

3. Bleed air from the brake system. Then, run the engine at low idle and adjust the oil level again.

(Do not use the oil discharged during the air bleeding operation.)

For details, see the Operation and Maintenance Manual.

Retightening of hose clamps * After starting the engine, retighten the clamps of the low-pressure hoses.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

117

Assembly process No.

Slinging of body

0650 Slinging of body Body sling pin (ATH-785-006) Shackle BC40 for 10 ton

Chain sling (ATH-465-039) or ø28 wire

Inserting direction of body sling pin (ATH-785-006): Insert from outside of body.

1. Set the body sling pins from outside of the body side plate (4 pieces to holes of body).

2. Set the shackles and sling.

3. Check the center and sling the body.

Precautions

Necessary tools Name

Other remarks

118

Q'ty

Necessary equipment Name Q'ty Sling (ATH-465-039) 1 Sling (ATH-785-006) 4 Pin (BC40) 4 Crane (50 ton) 1

Assembly process No.

Installation of hinge pin

0660 Installation of hinge pin

A A

Tightening 245 Nm - 309 Nm 3 ing:torque: 245 -- 309 {25 -31.5 kgm} {25 - 31.5 kgmď˝?

Clearance: Max. 1 mm Clearance: Max. 1 mm

Section A-A (1) (2) (3) (4) (5) (6) (7) (8)

Part No. 568-74-12650 568-74-11421 568-74-12660 568-74-12670 561-74-61740 01010-81635 01643-31645 421-70-11280

Part name Shim t = 6.0 Shim t = 2.3 Shim t = 1.0 Shim t = 4.5 Pin Bolt Washer Washer

Q'ty 2 8 8 2 2 2 2 2

Condition of part (Parts list No.) Packed separately (HD785-7-660) Packed separately (HD785-7-660) Packed separately (HD785-7-660) Packed separately (HD785-7-660) Packed separately (HD785-7-660) Packed separately (HD785-7-660) Packed separately (HD785-7-660) Packed separately (HD785-7-660)

1. Operate the crane to set the pin holes of the frame to those of the body.

2. Insert shims to even the clearance and reduced to 1 mm or less and then insert pins (5).

3. Fix the pins with the lock bolts.

Precautions

Necessary tools Name Q'ty Torque wrench (2800QL) 1

Necessary equipment Name Q'ty

Other remarks

119

Assembly procedure No.

Connecting hoist cylinder

0670 Connecting hoist cylinder

① ③ ② ④

Hoist cylinder

Tightening torque：157 - 196 Nm ｛16 - 20 kgm｝

Main frame

No. (1) (2) (3) (4)

Part No. 561-52-61211 01010-81430 569-40-61710 07042-20108

Part Name Pin Bolt Washer Plug

Q'ty 2 2 2 2

State of part (Parts list No.) Separately Packed （HD785-7-670） Separately Packed （HD785-7-670） Separately Packed （HD785-7-670） Separately Packed （HD785-7-670）

1. Match the hoist cylinder rod hole to the pin hole of the body mounting part.

2. Insert pin (1) and fix it.

3. Tighten set bolts (2) and (3).

4. Install plug (4).

Precautions

Necessary tools Name

Other remarks

120

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Hoist cylinder grease piping

0680 Hoist cylinder grease piping

Install fitting (7) outward.

(1) (2) (3) (4) (5) (6) (7)

Part No. 421-09-12540 423-09-12110 561-52-82610 01024-80816 04434-50608 07042-20108 07020-00000

Part name Elbow Connector Tube Bolt, sems Clip Plug Fitting

Q'ty 2 2 2 2 2 2 2

Condition of part (Parts list No.) Packed separately (HD785-7-680) Packed separately (HD785-7-680) Packed separately (HD785-7-680) Packed separately (HD785-7-680) Packed separately (HD785-7-680) Packed separately (HD785-7-680) Packed separately (HD785-7-680)

1. Install the grease tubes to the hoist cylinder. (Install the right and left tubes similarly.)

2. Supply grease.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

121

Assembly process No.

0685

Fixing of auto grease piping to body (If equipped: Auto grease specification)

Fixing of auto grease piping to body 1.Fix the auto grease piping to the body.

: 9 places

Section A-A

View X

Section B-B Detail of part P

(1) (2) (3) (4)

Part No. 561-95-83250 04434-51010 01024-81020 01024-81016 Precautions

Part name Bracket Clip Bolt, sems Bolt, sems

Q'ty 1 11 3 9

Condition of part (Parts list No.) Packed separately (HD785-7-685) Packed separately (HD785-7-685) Packed separately (HD785-7-685) Packed separately (HD785-7-685) Necessary tools Name

Other remarks

122

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of field welding protection cover

0700 Installation of field welding protection cover

Part welded in field

Part welded in field

Part welded in field

1. Install the protection cover around each "part welded in field" shown in the above figure.

Precautions

Necessary tools Name Fireproof cloth (1 m Ă&#x2014; 10 m)

Q'ty 1

Necessary equipment Name Q'ty

Other remarks

123

Assembly process No.

Installation of body mount

0710 Installation of body mount 1. Install the body mount.

2. For the adjustment procedure, see the following section.

3 : (8) (12) 245 – 309 Nm- 31.5 kgm｝ ｛24.9 {24.9 – 31.5 kgm} Tightening torque (8) (12) : 245 - 309 Nm

Welded to frame For welding procedure, see C-0130.

Welded to frame For welding procedure, see C-0130.

(1) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15)

Part No. 561-74-61531 561-83-69540 561-83-69550 561-83-69560 561-83-69570 561-74-61511 01010-81645 01643-31645 561-74-61521 561-74-61540 01010-81660 01643-31645 561-46-8A890 561-46-8A870

Part name Shim t = 1.0 Shim t = 1.0 Shim t = 1.0 Shim t = 1.0 Shim t = 1.0 Pad Bolt Washer Pad Shim t = 1.0 Bolt Washer Bracket L.H. Bracket R.H.

Precautions After welding in the field, touch up the welded parts.

Q'ty 70 8 8 8 8 8 32 32 2 18 8 8 1 1

Condition of part (Parts list No.) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Packed separately (HD785-7-710) Necessary tools Name

Other remarks

124

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Procedure for adjusting body mount shim

0720 Procedure for adjusting body mount shim

1. Procedure for adjusting shim for body mount Adjust the shim according to the following procedure.

(1) Bottom mounts (Rubber mounts of body bottom plate) 1. Insert a spacer 43 mm thick (dimension marked with a) in the body end.

2. Measure distance b between the center of the body mount and the frame top (8 places on both sides).

3. Insert (b1 - 35), (b2 - 35), (b3 - 35) and (b4 - 35) pieces of shims (561-74-61531) in the points of b1, b2, b3 and b4 respectively. Omit the figures after the decimal fractions.

4. Install the bottom mounts and remove the spacers.

5. Lower the body and check that all of the 8 bottom mounts are in contact with the frame top. If not, adjust the shims.

6. Finish adjustment of the bottom mounts. * Before installing the frame temporarily, remove the paint from the grounding surface.

(2) Front mounts (Rubber mounts of body front plate) 1. After the above adjustment of the bottom mounts, place and tack-weld brackets 561-468A890 and 561-46-8A870 on the frame so that the clearance between the body and bracket will be 57 mm. (See Fig. 1) 2. Raise the body and weld the brackets permanently.

3. Insert 7 shims 561-74-61540 7 mm in total and install rubber pad 561-74-61521.

4. Lower the body and check that the total thickness of the rubber pad is 50 mm. If it is not 50 mm, set it to 50 mm by adjusting the shim.

5. Finish adjustment of the front mounts.

2. After the body is assembled, the discrepancy between the protector and cab must be 59 Âą 30 mm.

If the discrepancy is not 59 Âą 30 mm, adjust the shim of hinge pin (561-7461740) (See A-A).

Fig. 1

125

Assembly process No.

Field welding of exhaust tube

0730 1.

Field welding of exhaust tube

2.

Make the hook (part P) and weld it as shown in the figure.

After finishing the work, cut the welded hook with gas and finish the cut surface smoothly with a grinder and the paint it yellow.

Must be aligned.

Equivalent to 1 winding on exhaust pipe

Section A-A Procedure for assembling body exhaust inlet portion 1. Carry out the following work after adjusting the body mount.

2. Install spring (581-02-31360) and seal (582-02-11210) between tube (561-02-81170) and flange (561-02-61150) and then lock nut (0158011411) to dimension A shown in the figure. (4 places) 3. Fix the tube and flange with the jigs so that the distance between them will be the dimension show in the figure (188).

4. While the parts are fixed as explained in 2 and (3), insert plate (582-0211230) in the tube and insert them in the body exhaust inlet portion.

5. Align tube (561-02-81210) with flange (561-02-61150) at the flange mating face and then weld the plate and tube (561-02-81170).

(Runout must be 3 mm or less.)

6. After steps 2 - 5 above, remove the jigs used in step 3.

7. Tighten the bolts according to KES 04.123.1.

(1) (2)

Part No. 561-74-80100 582-02-11230

Part name Exhaust box, sub-assembly Plate

Precautions Runout must be 3 mm or less.

Q'ty 1 1

Necessary tools Name

Carry out the above work after adjusting the body mount shim.

Other remarks

126

Condition of part (Parts list No.) Packed separately (HD785-7-730) Packed separately (HD785-7-730) Q'ty

Necessary equipment Name Q'ty Spacer (ATH-465-027) 3

Assembly process No.

Assembly of body heater cover

0740 Assembly of body heater cover

: 54 –torque: 123 Nm 3 Tightening 54 - 123 Nm

｛5.5 - 12.5 kgm｝ {5.5 – 12.5 kgm}

1. Install the heater cover to the body.

(1) (2)

Part No. 561-74-81470 01024-81220

Precautions

Part name Cover Bolt, sems

Q'ty 1 6

Condition of part (Parts list No.) Packed separately (HD785-7-740) Packed separately (HD785-7-740)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

127

Assembly process No.

Installation of poke rock ejector

0770 Installation of poke rock ejector

Weight: 40.4 kg

Bend end of pin.

View from inside

(1) (2) (3)

Part No. 561-74-81620 581-74-11360 04050-18055

Part name Bar Pin Pin

Q'ty 2 2 2

Condition of part (Parts list No.) Packed separately (HD785-7-770) Packed separately (HD785-7-770) Packed separately (HD785-7-770)

rock ejector to the body.

1. Install the poke

Precautions

Necessary tools Name

Other remarks

128

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

rock ejector storage pin Installation of poke

0780 Installation of body lock pin

(1) (2)

Part No. 04205-11650 04052-11664

Part name Pin Pin

Q'ty 2 2

Condition of part (Parts list No.) Packed separately (HD785-7-780) Packed separately (HD785-7-780)

1. Install the poke rock ejector storage pin to the body.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

129

Assembly process No.

Installation of body mudguard

0790 Installation of body mudguard 1. Install the mudguard to the body.

Caution for installing guard

is curved, install it with * Since guard toward the rear of the machine.

Tightening 3 : 29.4 --torque: 49.0 Nm29.4 - 49.0 Nm ｛3.0 - 5.0 kgm｝ {3.0 -- 5.0 kgm} Bolt between support and body

3:

29.4 -- 49.0 Nm {3.0 -- 5.0 kgm}

Tightening torque: 29.4 - 49.0 Nm ｛3.0 - 5.0 kgm｝

3 : 29.4 --torque: 49.0 Nm29.4 - 49.0 Nm Tightening

{3.0 -- 5.0 kgm} Guard fixing bolt

Set glossy side toward rear of machine.

Set glossy side toward rear of machine.

(1) (2) (3) (4) (5) (6) (7) (8)

Part No. 561-74-61631 561-74-61641 01010-81225 01643-31232 561-74-61661 561-74-61651 01010-81230 01643-31232 Precautions

Part name Support L.H. Support R.H. Bolt Washer Guard Plate Bolt Washer

Q'ty 1 1 14 14 2 2 16 16

Condition of part (Parts list No.) Packed separately (HD785-7-790) Packed separately (HD785-7-790) Packed separately (HD785-7-790) Packed separately (HD785-7-790) Packed separately (HD785-7-790) Packed separately (HD785-7-790) Packed separately (HD785-7-790) Packed separately (HD785-7-790) Necessary tools Name

Other remarks

130

Q'ty

Necessary equipment Name Q'ty

View from left side of machine body

131

Assembly process No.

Installation of transmission underguard

0810 Installation of transmission underguard 1. Install the transmission underguard.

A

Thickness 1

Thickness 1

A

Section A-A

(1) (2) (3) (4) (5) (6)

Part No. 561-54-86201 561-54-66250 01010-82080 01580-12016 01643-32060 01010-82055

Precautions

Part name Guard sub-assembly Collar Bolt Nut Washer Bolt

(Weight: 120 kg)

Q'ty 1 2 2 2 6 2

Condition of part (Parts list No.) Packed separately (HD785-7-810) Packed separately (HD785-7-810) Packed separately (HD785-7-810) Packed separately (HD785-7-810) Packed separately (HD785-7-810) Packed separately (HD785-7-810)

Necessary tools Name

Other remarks

132

View Z

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Installation of front handle

0830 Installation of front handle 1. Install the handle to the front axle cooling piping. (Install to the right and left similarly.)

3: 59 -- 74 Nm Tightening torque: 59 - 74 Nm ď˝&#x203A;6.0 - 7.5 kgmď˝? {6.0 -- 7.5 kgm}

L.H.

R.H.

Front axle on right side of frame

Front axle on left side of frame

(1) (2) (3) (4) (5)

Part No. 561-54-86811 07283-34949 07283-34346 01597-01009 01643-31032 Precautions

Part name Grip Clip Clip Nut Washer

Q'ty 2 2 2 8 8

Condition of part (Parts list No.) Packed separately (HD785-7-830) Packed separately (HD785-7-830) Packed separately (HD785-7-830) Packed separately (HD785-7-830) Packed separately (HD785-7-830) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

133

Assembly process No.

Connection of dump sensor

0850 Connection of dump sensor

REAR FRAME

(1) (2) (3)

1.

2.

3.

4.

Part No. 01010-81035 566-40-11560 04245-4102A

Part name Bolt Washer Rod assembly

Q'ty 1 2 1

Condition of part (Parts list No.) Packed separately (HD785-7-850) Packed separately (HD785-7-850) Packed separately (HD785-7-850)

Install the rod.

Check that the distance between the rod end centers is 484 mm (If not, adjust).

Fix the dump sensor to the body with bolt (1).

Adjust the dump sensor according to "Procedure for adjusting dump sensor" on the next page.

Precautions

Necessary tools Name

Other remarks

134

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Procedure for adjusting dump sensor

0860 Procedure for adjusting dump sensor Note) Be sure to perform the following adjustment after adjusting the shim of the body mount.

1. Seat the dump body.

2. Check that the difference between the centers of the lever hole and potentiometer hole (Positioning hole marked with a: ø 5) is below 1 mm.

Caution) If the misalignment is larger than 1 mm, adjust it to 1 mm or less.

If the adjustment dimension of the rod is reduced to 480 mm or less at this time, the potentiometer may be broken. Accordingly, never reduce it so.

3. Check the value of the "Body position" on the real-time monitor in the cab.

Standard value of "Body position" when dump body is seated: 0.46 â&#x20AC;&#x201C; 0.54 V Procedure for using real-time monitor (1). Press the "t" and "<" switches simultaneously to set the machine monitor in the service mode and input the ID. ID No.: 6491 (2). Select the real-time monitor. (Change the item with the ">" and "<" switches and select it with the "U" switch.)

(3). Select the retarder controller. (Select the item with the ">" and "<" switches.)

(4). Check the value of Item No. 34602: "Body position".

If the value of the "Body position" is out of the standard range, adjust the rod length to set the value in the standard range. To increase the value, increase the rod length. To decrease the value, decrease the rod length.

Caution) If the adjustment dimension of the rod is reduced to 480 mm or less at this time, the potentiometer may be broken. Accordingly, never reduce it so.

4. Check that the value of the "Body position" is in the standard range and tighten the rod permanently.

NUT

Angle sensor

BOLT

484 Lever

REAR Frame

a Precautions Never reduce the rod length below 480 mm. If it is reduced below 480 mm, the potentiometer may be broken.

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

135

Assembly process No.

Calibrating dump control

0870 Calibrating dump control

RAISE

HOLD

FROATING

LOWER

REAR FRAME

a Before starting the calibration, run the engine until the hydraulic oil temperature reaches 80 – 90 °C. (Check with the real-time monitor.)

1. Lower the dump body to the stroke end and keep the control lever in the "FROAT" position for 5 secnds. a Check that the body pilot lamp is turned OFF. 2. Raise the body to the stroke end and keep the control lever in the "RAISE" position for 5 seconds while running the engine at low idle.

3. Lower the body and then raise it while running the engine at high idle. Then, while running the engine at low idle, set the lever in the "LOWER" position. When the body starts lowering, set the lever in the "FROAT" position and lower the body to the seat.

Repeat this operation 5 – 10 times. a Move the body to the stroke end by the raising operation and floating operation.

4. While running the engine at high idle, raise the body and then set the lever in the "LOWER" position.

When the body starts lowering, set the lever in the "FROAT" position and lower the body to the seat.

Repeat this operation 5 – 10 times. a Move the body to the stroke end by the raising operation and floating operation.

Precautions

Necessary tools Name

Other remarks

136

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Adjustment of optical axis of light

0880 Adjustment of optical axis of light 1. Remove the 4 bolts at the light bracket bottom and set the bracket as shown below.

2. Remove cap (09415-03614).

3. Loosen nut (A) and adjust the light lens face perpendicular to the ground.

4. Return the light, cap and bolts to the original state.

Fig. 1

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

137

Assembly process No.

Bleeding air from brake

0900 Bleeding air from brake * Bleed air from the rear hood box, rear brake and front brake in order. <Procedure for bleeding air from rear hood box> 1. Inside of rear hood box: 1 place

2. Rear brake: 7 places Left wheel brake: Right wheel brake:

2 places 2 places Parking brake Foot brake retarder brake

* Common to right and left

Rear brake slack adjuster: 2 places Parking brake differential top block: 1 place

3. Front brake: 6 places Left wheel brake: Right wheel brake: Front brake slack adjuster:

2 places 2 places 2 places

Foot brake Retarder brake Parking brake

* Common to right and left

1. Remove the rear hood box cover.

2. Start the engine and check that the oil levels in the transmission case and brake oil sub-tank are in the specified range and the brake oil pressure caution lamp is turned OFF. 3. Remove the cap of bleeder screw (1) on the block and insert the air hose. Prepare a container filled with oil and put the other end of the air hose in the oil by 50 mm.

4. Turn the parking brake switch OFF, loosen bleeder screw (1) about 3/4 turns and wait until the bubbles do not come out of the air hose any more.

5. After bleeding air, tighten bleeder screw (1) securely and put the cap. <Procedure for bleeding air from rear brake> 1. Start the engine and check that the oil levels in the transmission case and brake oil sub-tank are in the specified range and the brake oil pressure caution lamp is turned OFF. 2. Remove the cap of bleeder screw (2) of the slack adjuster and insert the air hose. Prepare a container filled with oil and put the other end of the air hose in the oil by 50 mm.

3. Press the brake pedal, loosen bleeder screw (2) about 3/4 turns and keep pressing the brake pedal until the bubbles do not come out of the air hose any more.

4. Pull the retarder control lever, loosen bleeder screw (2) about 3/ 4 turns and keep pulling the retarder control lever until the bubbles do not come out of the air hose any more.

5. Turn the parking brake switch OFF, loosen bleeder screw (2) about 3/4 turns and wait until the bubbles do not come out of the air hose any more.

6. After bleeding air, tighten bleeder screw (2) securely and put the cap.

7. Bleed air from the wheel brake by loosening and tightening bleeder screw (3) similarly to steps 2, 3, 4 and 6.

8. Bleed air from the wheel brake by loosening and tightening bleeder screw (4) similarly to steps 2, 5 and 6.

9. After finishing the above procedure, work on the opposite side similarly.

10. Referring to steps 2 – 6, bleed air from block (5) above the parking brake differential. <Procedure for bleeding air from front brake> 1. Start the engine and check that the oil levels in the transmission case and brake oil sub-tank are in the specified range and the brake oil pressure caution lamp is turned OFF and the front brake OFF switch is in the OFF position.

2. Remove the cap of bleeder screw (6) of the slack adjuster and insert the air hose. Prepare a container filled with oil and put the other end of the air hose in the oil by 50 mm.

3. Press the brake pedal, loosen bleeder screw (6) about 3/4 turns and keep pressing the brake pedal until the bubbles do not come out of the air hose any more.

4. Pull the retarder control lever, loosen bleeder screw (6) about 3/ 4 turns and keep pulling the retarder control lever until the bubbles do not come out of the air hose any more.

5. Turn the parking brake switch OFF, loosen bleeder screw (6) about 3/4 turns and wait until the bubbles do not come out of the air hose any more.

6. After bleeding air, tighten bleeder screw (6) securely and put the cap.

7. Bleed air from the wheel brake by loosening and tightening bleeder screw (7) similarly to steps 2, 3, 4 and 6.

8. Bleed air from the wheel brake by loosening and tightening bleeder screw (8) similarly to steps 2, 5 and 6.

9. After finishing the above procedure, work on the opposite side similarly. * Bleed air from all of the 14 bleeding points. * After bleeding air, add oil to the transmission case and brake sub-tank.

Precautions

Necessary tools Name 1. When bleeding air, stop the machine on a level Air hose (6 ø × 1 m) place and lock the wheels with chocks.

2. When bleeding air, raise the oil temperature to above 40 °C so that the air will be bled easily.

Other remarks

138

Q'ty 1

Necessary equipment Name Q'ty

Assembly process No.

0901

Bleeding air from brake of ASR specification (ASR specification: If equipped)

Bleeding air from brake of ASR specification <Procedure for bleeding air from brake of ASR specification> 1. Start the engine.

Remove cover from rear of operator's seat.

2.

Check that the transmission case and brake sub-tank are filled with oil and the brake oil pressure caution lamp is turned OFF.

3.

Turn the ASR switch ON, remove the cover from the rear of the operator's seat, and connect connector "TEST". (The valve opens and oil pressure is applied to the ASR circuit.)

4.

Referring to No. 0900 "Bleeding air from brake", bleed air from the rear brake.

5.

After bleeding air from the brake, disconnect connector "TEST".

6.

Install the cover removed in step 3.

*

After bleeding air, refill the traffic accident and brake subtank with oil.

Connector "TEST"

View Z

Precautions

Necessary tools Name 1. When bleeding air, stop the machine on a flat place Air hose (6 ø × 1 m) and set chocks under the wheels.

2. Bleed air while the oil temperature is above 40 °C so that air will be bled well.

Q'ty 1

Necessary equipment Name Q'ty

Other remarks

139

Assembly process No.

0905

Bleeding air from ABS circuit (ABS specification: If equipped)

Bleeding air from ABS circuit * Bleed air from air bleeding points (a), (c), (b), (d), (c) and (d) in order.

1. Inside of ABS front box: 2 places <Procedure for bleeding air from ABS circuit>

Air bleeding point (a)

1.

2.

3.

4.

5.

6.

Air bleeding point (b)

7.

8.

2. Inside of rear hood box: 2 places

9.

10.

Air bleeding point (c)

11.

12.

13.

14.

Air bleeding point (d)

15.

16.

17.

Rear hood box

18.

19.

* * ABS front box

Remove the rear hood box cover.

Remove the ABS front box cover.

Start the engine and fill the brake sub-tank with oil.

Turn the ABS switch ON. (The valve opens and oil pressure is applied to the ABS circuit).

Air bleeding point (a): Remove the cap of bleeder screw (1) in the ABS front box and insert the air hose. Prepare a container filled with oil and put the other end of the air hose in the oil by 50 mm.

Press the brake pedal, loosen bleeder screw (1) about 3/ 4 turns, and wait until bubbles do not come out of the air hose any more.

Pull the retarder control lever, loosen bleeder screw (1) about 3/4 turns, and wait until bubbles do not come out of the air hose any more.

After bleeding air, tighten bleeder screw (1) securely and put the cap.

Air bleeding point (c): Bleed air through bleeder screw (3) in the rear hood box according to steps 5 – 8.

Air bleeding point (b): Bleed air through bleeder screw (2) in the ABS front box according to steps 5 – 8.

Air bleeding point (d): Bleed air through bleeder screw (4) in the rear hood box according to steps 5 – 8.

Turn the ABS switch OFF. Air bleeding point (c): Remove the cap of bleeder screw (3) in the rear hood box and insert the air hose.

Prepare a container filled with oil and put the other end of the air hose in the oil by 50 mm.

Press the brake pedal, loosen bleeder screw (3) about 3/ 4 turns, and wait until bubbles do not come out of the air hose any more.

Pull the retarder control lever, loosen bleeder screw (3) about 3/4 turns, and wait until bubbles do not come out of the air hose any more.

After bleeding air, tighten bleeder screw (3) securely and put the cap.

Air bleeding point (d): Bleed air through bleeder screw (4) in the rear hood box according to steps 13 – 16.

Install the rear hood box cover.

Install the ABS front box cover.

Bleed air from all of the 4 bleeding points.

After bleeding air, refill the transmission case and brake sub-tank with oil.

Machine seen from above

Precautions Necessary tools Name 1. When bleeding air, stop the machine on a flat place Air hose (6 ø × 1 m) and set chocks under the wheels.

2. Bleed air while the oil temperature is above 40 °C so that air will be bled well.

Other remarks

140

Q'ty 1

Necessary equipment Name Q'ty

Assembly process No.

Adjusting suspension

0910 Adjusting suspension Nitrogen gas filter valve

Air bleeder valve

Air bleeder

Location of air bleeder valve of front suspension

Nitrogen gas cylindrer Suspension gas filler unit (7926-10-1000)

Dimension

Dimension

Dimension 247 ± 10 mm

Section of rear suspension Dimension 199 ± 10 mm

Front Section of front suspension

1.

2.

3.

4.

5.

6.

7.

8.

Rear

Loosen the air bleeder valves of the right and left front suspensions to bleed all air.

(Check that air does not come out any more (only oil flows out), and then tighten the valves again. (Tightening torque: 39.2 – 49 Nm {4 – 5 kgm})) Check that the valves are closed and install the suspension gas filler unit to the suspension cylinders.

Connect the hoses of the suspension gas filler unit to the nitrogen gas filler valves. (Since there are 2 hoses, connect them to the right and left suspension cylinders so that pressure will be applied to both cylinders evenly.)

Open the valve of the suspension gas filler unit gradually.

When the suspension cylinders rise to the specified level shown above, close the valve.

(Supply the gas to the front side according to the decal and to the rear side so that the dimensions in the figure will be obtained.)

Remove the hoses from the nitrogen gas filler valves and move the chassis forward and in reverse to fit the suspension cylinders, and then stop without applying the brake. (Finally, stop the truck without applying the brake to prevent an uneven load caused by braking.)

Apply the parking brake and check the length of the suspension cylinders.

If the length of the suspension cylinders is out of the standard range, repeat steps 3 – 7. (Usually, adjustment is completed by repeating those steps 3 – 4 times.)

Precautions

1. Bleed air from the cylinders.

Quantity of oil to be supplied = 16.5 l (Reference) 2. Fill both suspension cylinders simultaneously.

3. Do not extract the suspension cylinders to the stroke end.

4. After moving the truck forward and in reverse, stop it without applying the brake.

5. Do not steer the truck before finishing this adjustment. (If it is steered, the piping may be broken.)

Necessary tools Name Q'ty Suspension gas filler unit 1 (7926-10-1000)

Necessary equipment Name Q'ty

Other remarks

141

Assembly process No.

Charging air conditioner with refrigerant

0920 Charging air conditioner with refrigerant

Connection of gas charge

Receiver sight glass

1. Connect the air conditioner refrigerant charge.

2. Charge the air conditioner with the specified quantity of the refrigerant.

• Air conditioner refrigerant: R134a • Quantity: 900 ± 50 g • Point While running the engine at low idle, charge the air conditioner with refrigerant.

Adjust the quantity of the refrigerant by checking the receiver sight glass.

(1)

Part No. 20Y-979-3310 Precautions

Part name Drum

Q'ty 5

Condition of part (Parts list No.) Packed separately (HD785-7-920) Necessary tools Name

Other remarks

142

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Fitting of floating seal

0930 Fitting of floating seal 1. Prepare for travel.

To fit the floating seal in the rear axle, install oil receivers as shown in the above figure.

(Install similar oil receivers to the front axle, too.)

2. Check of travel After preparing for travel, drive the machine for several km.

Gear speed F1 F2 F3 F4 F5 F6 F7

Reference: HD785-5 Travel distance (Rough standard) 500 m 500 m 1000 m 1000 m 1000 m 1500 m 1500 m

After driving the machine, visually check that little oil has been drained.

Precautions

Necessary tools Name Q'ty Drained oil receiving con- 1 tainer

Necessary equipment Name Q'ty

Other remarks

143

Assembly process No.

Painting

0950 Painting

Welded parts of exhaust pipe (Heat-resistant silver paint)

Welded parts body

Welded part of body mount

Paint (Sent from factory for trucks in Japan) Undercoat paint RETAN GP primer : 4 kg RETAN GP hardener : 0.8 kg RETAN GP thinner : 4 l

Topcoat paint SR3000 natural yellow: 16 kg SR3000 hardener : 15 kg Urethane thinner 205 : 17 l

Heat-resistant silver paint : Spray can Black gray paint : Spray can

1. Paint each welded part and scratch with the specified paint.

2. Mix the base and hardener of the paint well at the ratio of "5:1, thinning rate: 10 â&#x20AC;&#x201C; 30%" before using.

3. If there is a scratch on the chassis, touch up it with the above paint.

Precautions

Necessary tools Name Cup gun set (W87-20R2S) Brush Paint sander (914B) Paint sand paper (#80) Paint sand paper (#180)

Other remarks

144

Q'ty 1 1 1 100 10

Necessary equipment Name Q'ty

Assembly process No.

Touchup

0960 Touchup *

The paint may be removed from the parts on which slings were installed or which were machined or bruised. Touch up those parts.

Touch up each part with paint of the color around it. (See 5-2. Touchup paint list.)

(Always touch up parts (1) â&#x20AC;&#x201C; (3) shown below. Touch up the other parts if the paint is removed from them.)

(1) Machined part of tire (2) Hoist cylinder clamp (3) Bruised part of pin

Precautions * Work on both sides similarly.

Necessary tools Name Q'ty (See 5-2. Touchup paint list)

Necessary equipment Name Q'ty

Other remarks

145

Assembly procedure No.

Sticking of front axle decal

1000

Ｙ Ｙ Front axle -R.H.

Front axle -L.H.

Sticking of front axle decal

50

1. Stick the decals to the front axle. (Stick to the cover side.

Front axle R.H. is on the front side and front axle L.H. is on the rear side.)

Cover

③General overseas countries and Indonesia

③④⑤

⑤Japan ④USA & Puerto Rico

View Y

No. (3) (4) (5)

Part No. 09659-A0881 09659-33000 09659-A0880

Cautions 1. Note that different front axle decals ((3) (5)) are used for different destinations.

(Necessary quantity: 2 pieces/machine)

Q'ty State of part (Parts list No.) 2 Separately Packed （HD785-7-1001） 2 Separately Packed （HD785-7-1002） 2 Separately Packed （HD785-7-1000）

Part Name Plate Plate Plate

Special tool Name

Q’ty

Necessary Equipment Name Q’ty

Other remarks Sales code： (3) 2ZZ02 （General overseas countries ）, 2ZZ39 （Indonesia） (4) 2ZZ03 （USA ＆ Puerto Rico) (5) 2ZZ01 （Japan）

146

Assembly process No.

1020-1

Operating procedure of prelubrication system (If equipped: Engine prelubrication specification)

Operating procedure of prelubrication system

A. In normal state 1. Turn "ON" the starting switch in the cab. (See Fig. 1.)

2. Check the state of the prelubrication indicator on the left side of the starting switch.

• State of prelubrication indicator Blinking : Engine needs to be prelubricated.

Lighting : Engine is being prelubricated.

OFF : Prelubrication is finished (Engine can be started).

3. Start the engine according to the state of the prelubrication indicator.

3-a) Prelubrication indicator is blinking Step 1. Turn the starting switch to the "START" position and wait until the prelubrication indicator stops blinking and lights up and then release the starting switch. (The released starting switch returns automatically to the "ON" position.)

Step 2. Prelubrication is finished in 10 – 60 seconds.

(If the engine temperature is low (the coolant temperature is -5 °C or below), the preheater operates automatically after prelubrication is finished. Check the state of preheat lamp.) (See Fig. 3.)

• Preheat lamp ON : Engine is being preheated.

OFF : Preheating is finished.

Step 3. Check the prelubrication indicator.

• If the indicator is blinking, wait for 60 seconds and then repeat steps 1 – 3 (up to 3 times).

• If the indicator is turned OFF, turn the starting switch to the "START" position to start the engine.

3-b) Prelubrication indicator is turned OFF. • Turn the starting switch to the "START" position to start the engine.

B. Procedure for connecting emergency start connector (when prelubricator is broken and engine cannot be started) 1. There are 2 each of the 3-pole connectors tagged with "PRE1" and "PRE2" around the prelubrication controller under the passenger seat, and the connectors of the same tags are connected to each other.

2. To start the engine without performing prelubrication, disconnect the 2 couples of the connectors and connect "PRE1 (male)" to "PRE2 (female)" and connect "PRE1 (female)" to "PRE2 (male)".

(See Fig. 4.)

3. Turn the starting switch to the "START" position, and the engine skips prelubrication and starts.

• If prelubrication is skipped while the engine is cold, when the starting switch is turned to the "ON" position, the preheater operates. (The preheat lamp does not light, however.)

147

Assembly process No.

Operating procedure of prelubrication system (If equipped: Engine prelubrication specification)

1020-2

Operating procedure of prelubrication system

STARTING SWITCH

CONNECTOR FOR EMERGENCY PURELUBE SET ON RELAY

ENGINE CONTROLLER PURELUBE OIL PRESSURE SWITCH

PREHEAT SIGNAL

(BATTERY)

PREHEAT RELAY

PRE1

PRE1

(FEMALE)

(MALE)

PRE2 (MALE)

PRE2 (FEMALE)

TO DRIVE RELAY PURELUBE CONTROLLER

STARTER RELAY

ENGINE START AUTHORIZE RELAY

PURELUBE START AUTHORIZE RELAY

CONNECTOR FOR EMERGENCY

PURELUBE RELAY

PURELUBE PUMP PRE1

PRE1 (MALE)

(FEMALE)

PRE2 PRE2

(FEMALE)

(MALE)

CONNECTING EMERGENCY START CONNECTOR

Fig. 4

CHECK VALVE

PRESSURE HOSE

ENGINE

OIL FILTER SUCTION HOSE

148

PRELUBE PUMP

Assembly process No.

Installation of chocks (If equipped)

1100 Installation of chocks

1. Install the bracket to the front of the frame.

2. Install the chocks

(1) (2) (3) (4)

Part No. 569-98-63110 569-95-46820 01010-81625 01643-31645

Precautions

Part name Bracket Stopper, (Tire) Bolt Washer

Q'ty 1 2 4 4

Condition of parts Loose-supply item (Separately packed) Loose-supply item (Separately packed) Loose-supply item (Separately packed) Loose-supply item (Separately packed)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

149

Assembly process No.

Installation of radiator curtain (If equipped)

1200 Installation of radiator curtain 1. Remove the installed snaps (2) and washers (3).

2. Install curtain (1) with the snaps (2) and washers (3) removed in step 1.

A A

Point marked with : 22 places

Point marked with : 22 places

Section A-A

(1) (2) (3)

Part No. 561-84-81810 409-03-19130 01602-20720

Precautions

Part name Curtain Snap Washer

Q'ty 1 22 22

Condition of part (Parts list No.) Packed separately (HD785-7-1200) Installed to machine Installed to machine

Necessary tools Name

Other remarks

150

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

1300

Installation and connection of beacon lamp (If equipped: Yellow beacon lamp specification) Tighten together with beacon lamp mounting nut.

Installation and connection of beacon lamp Connect: PR04B (Ground) Connect: PR04 (Beacon lamp)

Section B-B

1. Remove the nut of beacon lamp (1) and install it to bracket (2).

Section A-A 2. Install cover (4) to the beacon lamp with bolts (5).

3. Install the beacon lamp to the right platform with bolts (3).

4. Fix the beacon harness coming out of the right front support with clips (6).

1 place: Tighten with beacon lamp mounting nut.

1 place: Fix with bolt (10).

5. Connect the beacon harness coming out of the right front support.

CN PR04 : Beacon lamp CN PR04B : Ground ... Install with bolt (7), washer (8) and nut (9). * If the ground connecting part is stained or painted, remove all the stain or paint.

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)

Part No. 08154-12400 561-85-81340 01024-81020 569-85-88570 01024-81025 04434-50810 01024-80825 01643-30823 01580-10806 01024-81016 Precautions

Part name Lamp, beacon Bracket Bolt, sems Cover Bolt, sems Clip Bolt, sems Washer Nut Bolt, sems

Q'ty 1 1 4 1 2 2 1 1 1 1

Detail of part P

View Z

Condition of parts Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Packed separately (HD785-7-1300) Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

151

Assembly procedure No.

Assembly of power ladder step -1 (If equipped)

1400 Assembly of power ladder step -1 1. Install the handrail to the ladder. * When installing clamp (3), see "Fig. 1".

Fig.1

Set edge side up.

Up

② Set rear side down.

⑥⑦

Photo of clamp (3)

①

③④⑤

(1) (2) (3) (4) (5) (6) (7)

Part No. 561-89-86933 561-89-86961 561-54-61910 01010-81635 01643-31645 561-89-86810 01024-81025

Precautions

Part name Step Guard Clamp Bolt Washer Plate Bolt, sems

Q'ty 1 1 3 6 6 1 2

★ marks ： 3 places

State of parts (Parts list No.) Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Other remarks

Sales code : 6HB55A

152

Weight： 76.69 kg

Q'ty

1

Necessary equipment Name Q'ty

Crane （25 ton）

1

Assembly procedure No.

Assembly of power ladder step -2 (If equipped)

1410 Assembly of power ladder step -2 1. Install the step to the under mirror. * When installing mirror, see "Fig. 1".

Fig.1

63

A

90°

View Z

①

Detail of part A Ｚ

② ⑤⑥ ③④

View Z

⑦

(1) (2) (3) (4) (5) (6) (7)

Part No. 561-89-8693A 561-89-8A780 07283-32236 07283-52232 01643-31032 01597-01009 569-54-8C330 Precautions

Part name Step assembly Stay Clip Seat Washer Nut Mirror

Q'ty 1 1 2 2 4 4 1

State of parts (Parts list No.) See field assembly procedure No.0481.

Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Q'ty

1

Necessary equipment Name Q'ty

Crane （25 ton）

1

Other remarks

Sales code : 6HB55A

153

Assembly procedure No.

Assembly of power ladder step -3 (If equipped)

1420 Assembly of power ladder step -3 1. Install the handrail to the ladder. * When installing clamp (3), see "Fig. 1".

②

③④⑤ ★ marks ： 3 places

A

① Weight ：74.10 kg

⑦⑧⑨ ◆ marks ： 3 places

⑥ Detail of part A

(1) (2) (3) (4) (5) (6) (7) (8) (9)

Part No. 561-89-86911 561-89-87170 561-54-61910 01010-81635 01643-31645 561-89-87180 01024-81245 01643-31232 01580-11210 Precautions

Part name Ladder Guard Clamp Bolt Washer Guard Bolt, sems Washer Nut

Q'ty 1 1 3 6 6 1 3 3 3

State of parts (Parts list No.) Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Other remarks

Sales code : 6HB55A

154

Q'ty

1

Necessary equipment Name Q'ty

Crane （25 ton）

1

Assembly procedure No.

Assembly of power ladder main part -1 (If equipped)

1430 Assembly of power ladder main part -1 1. Install the step assembly to the front side of the cab.

A

A

①

⑧ ⑤ ④

③

② ④ ⑥

⑦

(1) (2) (3) (4) (5) (6) (7) (8)

Precautions

Part No. 561-89-869A 566-54-12212 566-54-21910 566-54-21920 01011-82015 01580-12016 01643-32060 566-54-21931

Q'ty Part name Ladder assembly 1 4 Cushion 2 Bushing 4 Plate Bolt 2 2 Nut 2 Washer Plate 2

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

State of parts (Parts list No.) See field assembly procedure No.1410.

Packed separately （HD785-7K-030） Packed separately （HD785-7K-030） Packed separately （HD785-7K-030） Packed separately （HD785-7K-030） Packed separately （HD785-7K-030） Packed separately （HD785-7K-030） Packed separately （HD785-7K-030）

Q'ty

1

Necessary equipment Name Q'ty

Crane （25 ton）

1

Other remarks

Sales code : 6HB55A

155

Assembly procedure No.

Assembly of power ladder main part -2 (If equipped)

1440 Assembly of power ladder main part -2 1. Install the rod assembly to the front side of the cab.

④

⑤ ⑦

② ④ ⑦

③ A-A

⑥ ④

A

A

⑥

②

⑦

①

③ B

B-B

④ ⑦ ⑤ B

(1) (2) (3) (4) (5) (6) (7)

Part No. 561-89-6A970 566-54-12212 566-54-21910 566-54-21920 01597-02016 01583-12012 01643-32060 Precautions

Part name Rod Cushion Bushing Plate Nut Nut Washer

Q'ty 1 4 2 4 2 4 4

State of parts (Parts list No.) Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050）

Necessary tools Name

Nylon sling （250 mm wide x 5 m）

Other remarks

Sales code : 6HB55A

156

Q'ty

1

Necessary equipment Name Q'ty

Crane （25 ton）

1

Assembly procedure No.

Assembly of power ladder main part -3 (If equipped)

1450 Assembly of power ladder main part -3 1. Install the ladder assembly to the front side of the cab.

★ ★

★

★

★

★

View Z

② ★ marks ： 6 places

Z

①

(1) (2)

Part No. 561-89-8691A 01024-81235

Precautions

Part name Ladder assembly Bolt, sems

Q'ty 1 6

State of parts (Parts list No.) See field assembly procedure No.1420.

Packed separately （HD785-7K-030）

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

Sales code : 6HB55A

157

Assembly procedure No.

Assembly of power ladder main part -4 (If equipped)

1460 Assembly of power ladder main part -4 1. Install the bumper to the step sub-assembly.

Section A-A

③④ 2 places

②④ ★ marks ： 6 places

A

A

① Weight ： 212.8 ㎏

(1) (2) (3) (4)

Part No. 561-89-87031 01010-81645 01010-81655 01643-31645

Precautions

Part name Step sub-assembly Bolt Bolt Washer

Q'ty 1 6 2 8

State of parts (Parts list No.) Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020） Packed separately （HD785-7K-020）

Necessary tools Name

Other remarks

Sales code : 6HB55A

158

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Assembly of power ladder main part -5 (If equipped)

1470 Assembly of power ladder main part -5 1. Install the step sub-assembly to the ladder assembly.

⑧ ⑦

④

③

①

②

⑥ ⑤

Section A-A

A

A

(1) (2) (3) (4) (5) (6) (7) (8)

Part No. 566-54-12212 566-54-21910 566-54-21920 01011-82015 01580-12016 01643-32060 566-54-21931 09415-03614 Precautions

Part name Cushion Bushing Plate Bolt Nut Washer Plate Cap

Q'ty 4 2 4 2 2 2 2 2

State of parts (Parts list No.) Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Packed separately （HD785-7K-050） Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

Sales code : 6HB55A

159

Assembly procedure No.

Assembly of power ladder main part -6 (If equipped)

1480 Assembly of power ladder main part -6 1. Install the ladder assembly to the step assembly of the front side of the cab.

①

②③

FWD

(1) (2) (3)

Part No. 01010-81245 01643-31232 01580-11210

Precautions

Part name Bolt Washer Nut

Q'ty 2 2 2

State of parts (Parts list No.) Packed separately （HD785-7K-040） Packed separately （HD785-7K-040） Packed separately （HD785-7K-040）

Necessary tools Name

Other remarks

Sales code : 6HB55A

160

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Assembly of power ladder main part -7 (If equipped)

1490 Assembly of power ladder main part -7 1. Connect the hoses to the emergency lowering valve.

Check O-rings before connecting

②

①

1

Ｙ

View Y

(1) (2)

Part No. 02765-00326 02765-00327

Precautions

Part name Hose Hose

Q'ty 1 1

State of parts (Parts list No.) Packed separately （HD785-7K-060） Packed separately （HD785-7K-060）

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

Sales code : 6HB55A

161

Assembly procedure No.

Assembly of power ladder main part -8 (If equipped)

1500 Assembly of power ladder main part -8 1. Fix the hoses coming from the emergency lowering valve.

50°

①③④ ②③⑤⑥ ②③⑤⑥ Hoses must not interfere

②③⑤⑥ ①③④ 15°

(1) (2) (3) (4) (5) (6)

Part No. 07094-30315 07094-10315 07095-00314 01024-81260 01011-81200 01643-31232

Precautions

Part name Clamp Clamp Cushion Bolt, sems Bolt Washer

Q'ty 4 12 10 2 3 3

State of parts (Parts list No.) Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060）

Necessary tools Name

Other remarks

Sales code : 6HB55A

162

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Assembly of power ladder main part -9 (If equipped)

1510 Assembly of power ladder main part -9 1. Fix and connect the hoses inside the step sub-assembly.

③④⑥

Check O-rings before connecting

①

③④⑤

②

(1) (2) (3) (4) (5) (6)

Part No. (02765-00326) (02765-00327) 07094-30315 07095-00314 01024-81260 01024-81255

Precautions

Part name Hose Hose Clamp Cushion Bolt, sems Bolt, sems

Q'ty 1 1 4 4 1 1

State of parts (Parts list No.) See field assembly procedure No.1490.

See field assembly procedure No.1490.

Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060）

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

Sales code : 6HB55A

163

Assembly procedure No.

Assembly of power ladder main part -8 (If equipped)

1500 Assembly of power ladder main part -8 1. Fix the hoses coming from the emergency lowering valve.

50°

①③④ ②③⑤⑥ ②③⑤⑥ Hoses must not interfere

②③⑤⑥ ①③④ 15°

(1) (2) (3) (4) (5) (6)

Part No. 07094-30315 07094-10315 07095-00314 01024-81260 01011-81200 01643-31232

Precautions

Part name Clamp Clamp Cushion Bolt, sems Bolt Washer

Q'ty 4 12 10 2 3 3

State of parts (Parts list No.) Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060） Packed separately （HD785-7K-060）

Necessary tools Name

Other remarks

Sales code : 6HB55A

164

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Assembly of power ladder main part -11 (If equipped)

1530 Assembly of power ladder main part -11 1. Connect the main wiring harness of the power ladder.

2. Connect the hoses going to the power ladder unit.

SWH1 Main wiring harness of the power ladder

CN SWH2 Main wiring harness of the power ladder

Ｚ Check O-rings before connecting

Connect

②① Check O-rings before connecting View Z

(1) (2)

Part No. 04434-51410 01024-81025 Precautions

Part name Clip Bolt, sems

Q'ty 1 1

State of parts (Parts list No.) Packed separately （HD785-7K-090） Packed separately （HD785-7K-090）

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

Sales code : 6HB55A

165

Assembly procedure No.

Assembly of power ladder main part -12 (If equipped)

1540 Assembly of power ladder main part -12 1. Install ladder sub-assembly to the step sub-assembly. * When installing step, see "Fig. 1".

④③ ②

【A】

① 【B】

Adjust clearances (Bl and Br) between step sub-assembly [A] and ladder sub-assembly [B] evenly on the right and left sides by moving ladder sub-assembly [B]. (Nominal clearance: 8 mm)

【A】 Ｂｒ

Ｂｌ

【B】

Fig.1

(1) (2) (3) (4)

Part No. 561-89-87022 561-89-87890 04082-00212 01024-81230 Precautions

Part name Ladder A., SUB Pin Lock Bolt, sems

Q'ty 1 2 2 4

State of parts (Parts list No.) Packed separately（HD785-7K-070） Packed separately（HD785-7K-070） Packed separately（HD785-7K-070） Packed separately（HD785-7K-070）

Necessary tools Name

Other remarks

Sales code : 6HB55A

166

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Assembly of power ladder main part -13 (If equipped)

1550 Assembly of power ladder main part -13 1. Install the ladder sub-assembly to the step sub-assembly. * When installing pin (1), see "Fig. 1".

12°

View Z

A

A

②③④

②③④

① ⑦ Z

Fig.1

Use shims to adjust the dimensions as shown in the figure.

(1) (2) (3) (4) (5) (6) (7)

Part No. 561-89-87230 56B-54-16470 56B-54-16480 56B-54-16490 417-43-16210 01024-81016 07020-00675 Precautions

⑥

⑤

Part name Pin Shim, T4.5 Shim, T1.6 Shim, T0.5 Washer Bolt, sems Fitting

Q'ty 1 2 4 4 1 1 1

A-A State of parts (Parts list No.) Packed separately （HD785-7K-080） Packed separately （HD785-7K-080） Packed separately （HD785-7K-080） Packed separately （HD785-7K-080） Packed separately （HD785-7K-080） Packed separately （HD785-7K-080） Packed separately （HD785-7K-080）

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

Sales code : 6HB55A

167

Assembly procedure No.

Assembly of power ladder main part -14 (If equipped)

1560 Assembly of power ladder main part -14 1. Install the ladder sub-assembly to the sensor assembly.

⑨ ①②③

Z

⑧ ⑦⑥ Connect 60°

CN RPOS Ladder position sensor

(1) (2) (3) (4) (5) (6) (7) (8) (9)

Part No. 7861-93-871A 01010-81435 01643-31445 08193-21012 01024-81016 04434-50810 01024-81016 01024-81020 561-89-87190

Precautions

Q'ty Part name Sensor assmbly 1 2 Bolt 2 Washer 1 Clip 1 Bolt, sems 1 Clip 1 Bolt, sems 1 Bolt, sems 1 Guard

State of parts (Parts list No.) Packed separately （HD785-7K-090） Packed separately （HD785-7K-090） Packed separately （HD785-7K-090） Packed separately （HD785-7K-090） Packed separately （HD785-7K-090） Packed separately （HD785-7K-090） Packed separately （HD785-7K-090） Packed separately （HD785-7K-090） Packed separately （HD785-7K-020）

Necessary tools Name

Other remarks

Sales code : 6HB55A

168

④⑤

View Z

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Assembly of power ladder main part -15 (If equipped)

1570 Assembly of power ladder main part -15 1. Install the cover.

③

②

FWD

②

①

④

(1) (2) (3) (4)

Part No. 561-89-87281 01024-81020 01024-81035 01024-81065

Precautions

Part name Cover Bolt, sems Bolt, sems Bolt, sems

Q'ty 1 2 1 1

State of parts (Parts list No.) Packed separately （HD785-7K-070） Packed separately （HD785-7K-070） Packed separately （HD785-7K-070） Packed separately （HD785-7K-070）

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

Sales code : 6HB55A

169

Assembly procedure No.

Assembly of power ladder main part -16 (If equipped)

1580 Assembly of power ladder main part -16 1. Install the handrail to the ladder sub-assembly.

FWD

①②

②①

⑦⑥⑤

⑤⑥⑦ ③④

④③

(1) (2) (3) (4) (5) (6) (7)

Part No. 561-89-87252 01024-81245 561-89-87880 01024-81245 07283-33450 01597-01009 01643-31032

Precautions

Part name Guard Bolt, sems Plate Bolt, sems Clip Nut Washer

Q'ty 2 8 2 8 2 4 4

State of parts (Parts list No.) Packed separately （HD785-7K-070） Packed separately （HD785-7K-070） Packed separately （HD785-7K-070） Packed separately （HD785-7K-070） Packed separately （HD785-7K-070） Packed separately （HD785-7K-070） Packed separately （HD785-7K-070）

Necessary tools Name

Other remarks Sales code : 6HB55A

170

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Refilling power ladder with oil

1590 Refilling power ladder with oil 1. For the kind of oil and refilling procedure, see the following table.

Procedure for refilling power ladder system with oil 1) Remove the power unit cover and the four mounting bolts on the platform.

2) Remove oil filler cap [A] of the pump tank and add oil to the specified level.

3) Operate the ladder RAISE and LOWER switches to raise and lower the ladder between the storage position and lowest position several times.

Since the oil level inside the tank lowers at this time, add oil as necessary while operating the ladder.

4) Set the ladder to the lowest position, open the emergency lowering valve fully (turn it counterclockwise), and hold down the ladder RAISE switch for about 10 seconds.

5) Close the emergency lowering valve fully (turn it clockwise), and then raise and lower the ladder several times.

6) Set the ladder in the storage position and add oil to the specified level in the tank.

7) Tighten the oil filler cap of the tank and restore the parts removed in step 1).

Specified oil level

Sight gauge Oil filler cap

ă&#x20AC;?Aă&#x20AC;&#x2018; FWD

Power unit Emergency lowering valve Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code : 6HB55A

171

Assembly procedure No.

Adjustment of power ladder operating time

1600 Adjustment of power ladder operating time 1) Operate the ladder RAISE and LOWER switches to move the ladder and measure the time required to raise and lower the ladder between the storage position and the lowest position for mounting and dismounting the machine. * Adjust the raising and lowering times to "10 +- 2 seconds" respectively.

2) If the operating time needs to be adjusted, remove the six mounting bolts of the undercover of the power ladder step and lower the undercover.

3) Adjustment of ladder raising time 3-1) When the operating time is short, turn the ladder raising speed adjustment dial of the speed adjustment valve clockwise.

3-2) When the operating time is long, turn the ladder raising speed adjustment dial of the speed adjustment valve counterclockwise.

4) Adjustment of ladder lowering time 4-1) When the operating time is short, turn the ladder lowering speed adjustment dial of the speed adjustment valve clockwise.

4-2) When the operating time is long, turn the ladder lowering speed adjustment dial of the speed adjustment valve counterclockwise.

5) If hunting occurs after adjustment of the ladder operating time, turn the ladder adjustment dial of the speed adjustment valve counterclockwise until hunting stops.

6) After finishing adjustment, restore the parts removed in step 2).

6 .

Ladder RAISE switch

Y

Ladder LOWER switch Ladder raising speed adjustment dial Undercover

View Y

Z

Ladder lowering speed adjustment dial

View Z Precautions

Necessary tools Name

Other remarks Sales code : 6HB55A

172

Q'ty

Necessary equipment Name Q'ty

Assembly procedure No.

Installation of additional under view mirror

1610 Installation of additional under view mirror 1. Install the mirror to the guard.

A

295

B

②① 10°

Detail of part B

A

20°

A

⑥⑤③

②① B

③④⑤⑥

25°

B

②①

A-A

④

B-B

20°

20° 20°

Detail of part A

(1) (2) (3) (4) (5) (6)

Part No. 23W-P86-2890 561-54-81871 07283-32236 07283-52232 01597-01009 01643-31032

Precautions

Part name Mirror Stay Clip Seat Nut Washer

Q'ty 3 3 6 6 12 12

30°

State of parts (Parts list No.) Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010） Packed separately （HD785-7K-010）

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks Sales code : 6HB55A

173

Assembly process No.

T-0010

Bleeding air from fuel circuit 1 (If equipped: Extra low-grade fuel specification)

Bleeding air from fuel circuit * Bleed air in the following cases.

• When the fuel filter has been replaced • When fuel has run out • When the engine is started for the first time after modification of the piping or replacement of the supply pump -- Before bleeding air: Warning -• Before starting the engine, check that there are no persons around the machine.

The machine may start suddenly and may injure a person.

• When using the electric priming pump, do not loosen the air bleeding plug of the fuel circuit.

While the electric priming pump is operating, pressure is applied to the fuel circuit. If the air bleeding plug is loosened at this time, fuel may spout out.

Air bleeding procedure 1. Set the starting key in the OFF position and stop the engine.

2. Check that the fuel valve of the fuel tank is open.

3. Open the shut valves on the sides of the engine. There are 2 shut valves on the right and left sides. Open both of them.

4. Set the electric priming pump switch to the ON position, and the lamp blinks and the electric priming pump starts.

Precautions

Necessary tools Name

Other remarks

174

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

T-0020

Bleeding air from fuel circuit 2 (If equipped: Extra low-grade fuel specification)

Supplementary explanation â&#x20AC;˘ The electric priming pump switch has a built-in timer, which starts and stops the pump automatically. â&#x20AC;˘ The electric priming pump stops while the lamp is blinking. This does not indicate a trouble, however. â&#x20AC;˘ If the switch is set to the OFF position while the lamp is lighting, the electric priming pump stops.

OFF

5. After the set time (approx. 7 minutes), the lamp goes off automatically and the electric priming pump stops.

Set to ON position.

6. When the engine has stopped because of running up of fuel or when the fuel hose, fuel tube, etc. has been replaced, after the supply pump stops (the lamp goes off), set the electric priming pump switch to the ON position again.

7. When the lamp has gone off, air bleeding is finished.

8. Close the shut valves on the sides of the engine.

9. Start the engine.

If the engine does not start, try again according to the following procedure.

1) Check that the shut valve (Step 2) is open.

2) Set the electric priming pump switch (Step 4) to the ON position.

3) Start the engine while the electric priming pump is operating.

If the engine still does not start, wait for about 2 minutes and then repeat steps 2) and 3).

4) After the engine starts, run it for about 5 minutes to bleed all air from the fuel circuit.

Important Do not operate the starting motor for more than 20 continuous seconds. If you have failed start the engine, wait for about 2 minutes and then try again.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

175

Assembly process No.

Setting of machine monitor

T-0030 Monitor panel selector switches

Note) The machine monitor is set when the machine is delivered.

Set it again only when it needs to be set differently.

After assembling the machine to a degree that the starting switch can be turned ON, execute the procedures securely in order from 2. (How to set machine monitor in service mode) to No. T-0070 (Saving change of option selection), even if there is an error.

If the procedures are finished to No. T-0070 (Saving change of option selection) and the model and options are entered, each controller performs troubleshooting normally. If there is any error, repair it.

Symbols in drawings

1. Operation method of machine monitor When initializing the sensor or setting options, set the machine monitor in the service mode.

2. How to set machine monitor in service mode Operating method Turn ON the starting switch of the machine and then turn ON the machine monitor. While the character display of the machine monitor is displaying the normal service meter screen or warning screen, hold down machine monitor mode selector switch 1 (t) and machine monitor mode switch 2 (<) simultaneously for 5 seconds, and the screen changes to the service ID input screen.

3. Inputting method of ID (1) Press the </> switch, and the number at the cursor increase/decreases. Select the specified number and press the U switch.

(2) Perform the operation of (1) for the 4 places, and the screen changes to the electrical equipment system fault history screen.

(3) If a wrong number is input, press the t switch to return the cursor to the left end place and input the correct number from the left end place.

(4) If the t switch is pressed while the cursor is at the left end place, the screen changes to the normal service meter screen or warning screen.

(5) If no switch is pressed for 60 seconds in the ID input mode, the screen changes to the normal service meter screen or warning screen.

The ID to set the machine monitor in the service mode is "6491".

Remarks: If the starting switch is turned OFF while the machine monitor is in the service mode, the normal service meter screen or warning screen appears when the starting switch is turned ON next time.

Precautions

Necessary tools Name

Other remarks

176

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Selection of machine model

T-0040 1. Selection of machine model While the machine model selection screen is displayed in the service mode, press the U switch to change the selection of the machine model. q If machine model selection is executed, the setting of options is reset. Accordingly, execute machine model selection first after the machine monitor is initialized. After executing machine model selection, execute optional component selection from the first step. q A change of machine model selection becomes effective when the starting switch is turned ON after the change is made and the starting switch is turned OFF and each controller on the machine is turned off perfectly (about 15 seconds later).

Monitor panel selector switches

Symbols in drawings

Note) â&#x20AC;˘ After setting a new machine model, be sure to turn the starting switch OFF and wait for 15 seconds. â&#x20AC;˘ After setting a new machine model, be sure to set the optional component again.

Machine model selection function screen The currently selected machine model is displayed in the place of ?????.

If HD785-7 is selected, "HD785" is displayed.

2. Change of machine model Press the U switch, and the screen changes to the setting screen. * Only when the U switch is held down for 5 seconds, the screen changes to the machine model selection change screen.

Machine model selection function screen The currently selected machine model is displayed in the place of ?????.

If HD785-7 is selected, "HD785" is displayed.

Enter Cancel Machine model selection change screen

Each time the > switch is pressed, the item changes from the smallest item No. to the largest item No. After the largest item No., the smallest No. is displayed.

Each time the < switch is pressed, the item changes from the largest item No. to the smallest item No. After the smallest No., the largest No. is displayed.

(1) Set the machine model selection change screen to "HD785" with the </> switch.

(2) Press the U switch to enter the machine model, and the screen returns to the model selection function screen.

(3) If the t switch is pressed, change of machine model selection stops and the screen returns to the machine model selection function screen.

(4) Check that the machine model selection change screen is set to "HD785".

3. Saving of machine model change When the machine model selection has been changed, turn the starting switch OFF to stop the operation of the controllers perfectly (Wait for about 15 seconds after turning starting switch OFF).

When the starting switch is turned ON next time, the new machine model selection becomes effective.

Accordingly, after executing machine model selection, be sure to turn the starting switch OFF, wait for at least 15 seconds, and turn starting switch ON again.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

177

Assembly process No.

Selection of optional component

T-0050 1. Selection of optional component While the optional component selection screen is displayed in the service mode, hold down the U switch for at least 5 seconds to execute optional component selection. Check installation of the optional components of the related machine and set it correctly. q A change of machine model selection becomes effective when the starting switch is turned ON after the change is made and the starting switch is turned OFF and each controller on the machine is turned off perfectly (about 15 seconds later).

Monitor panel selector switches

Symbols in drawings

Note) • After setting a new machine model, be sure to turn the starting switch OFF and wait for 15 seconds. q Before setting optional components, check that model selection has been executed.

Item Sales Default Contents of selection No. code Exhaust brake 1 Not added (NO ADD) If exhaust brake is added, select ADD. 6HC23 ARSC 2 Added (ADD) If ARSC is added, select ADD. — ASR 3 Not added (NO ADD) If ASR is added, select ADD. 6HF66 ABS 4 Not added (NO ADD) If ABS is added, select ADD. 6HC22 Auto suspension 4 Added (ADD) If auto suspension is added, select ADD. 2HE02 VHMS/PLM 7 VHMS/PLM Select no VHMS [NON], 6HF55X only VHMS [VHMS] or 6HF55 VHMS + built-in PLM [+VHMS].

6HF55D EG mode selection ENG MODE 9 E1 Select engine mode (E1/E2/E3).

— Set E1 normally.

Body-up caution BODY UP CAU 10 Not added (NO ADD) If body-up caution function is added, select — ADD. Dump counter DUMP COUNT 11 Not added (NO ADD) If dump counter function is added, select ADD. — Tire size correction TIRE SIZE 12 0% Set speed correction quantity by tire size.

— HD785-7(27.00R49aa) : 0% HD785-7(31/90R49 E4) : -1% Pitch angle sensor INCLINOMET. 13 Added (ADD) If pitch angle sensor (machine lateral inclina6HB72 tion sensor) is added, select ADD. Front brake cut F BRAKE CUT 14 Added (ADD) If front brake cut function is added, select ADD. — Unit selection SPEED(UNIT) 15 MPH Selectable only when machine monitor of non— (MPH or km/h) SI specification is installed.

Select unit of travel speed (MPH or km/h).

Parking brake interlock PARKING I.L. 16 Not added (NO ADD) If parking brake interlock function is added, — select ADD. Maintenance sensor SENSOR 19 Not added (NO ADD) If maintenance sensor is added, select ADD. — Item

Display in English EXH BRAKE ARSC ASR ABS AUTO SUS VHMS/PLM

Precautions

Necessary tools Name

Other remarks

178

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Selection of option

T-0060 1. Selection of option Press the U switch, and the screen changes to the setting screen. * Only when the U switch is held down for 5 seconds, the screen changes to the option selection screen.

If the screen changes, the right and left differential lock selection screens are displayed.

Note) Be sure to start option setting from item No. 1 and set item No. 1 according to the following procedure.

Monitor panel selector switches

Symbols in drawings

When exhaust brake is not installed

q Check installation of the optional components of the related machine and set the items in order according to the above table.

For the setting method, see No. 1340.1.

See No. 1340.2 for correction of the tire size and see No. 1340.3 for selection of the unit, however.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

179

Assembly process No.

T-0070

Option setting/no-setting selection screen - Saving of change of option selection

1. Option setting/no-setting selection screen (1) If each optional component is not selected, the option no-setting screen is displayed. ("NO ADD" is displayed at the left bottom.)

(2) If each optional component is selected, option setting screen is displayed. ("ADD" is displayed at the left bottom.)

(3) ADD/NO ADD of each optional component can be changed with the U switch.

Each time the ? switch is pressed, ADD or NO ADD is replaced with the other.

(4) On each optional component selection change screen, the next optional on the other hand is selected with the </> switch.

(5) If the t switch is pressed, each optional component selection change screen returns to the option selection screen.

Monitor panel selector switches

Symbols in drawings

2. Tire size correction setting screen

3. Unit selection (Only monitor panel of non-SI specification)

4. Saving of change of option selection When the option selection has been changed, turn the starting switch OFF to stop the operation of the controllers perfectly (Wait for about 15 seconds after turning starting switch OFF).

When the starting switch is turned ON next time, the new option selection becomes effective.

Note) After executing option selection, be sure to turn the starting switch OFF, wait for at least 15 seconds, and turn starting switch ON again.

Precautions

Necessary tools Name

Other remarks

180

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

T-0080

OFF setting of corrosion resistor with maintenance monitor

OFF setting of corrosion resistor with maintenance monitor Turn the corrosion resistor maintenance function OFF for a machine which is not equipped with the corrosion resistor.

While the maintenance monitor screen is displayed in the service mode, press the U switch to select the maintenance function.

If the U switch is pressed, the screen changes to the "Maintenance item No. 1" screen.

Monitor panel selector switches

Symbols in drawings

Maintenance monitor (1st layer)

Maintenance item selection Select a corrosion resistor item with the </> switch.

When the corrosion resistor item is displayed, press the U switch, and the screen changes to the interval time change screen. Press the > switch to change the screen to the timer stop screen.

On the screen of selection of each item timer stop/each item effective, press the U switch, and the YES/ NO screen is displayed. Move the cursor with the < switch to YES and press the t switch.

To return to the normal screen, press the t switch 3 times.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

181

Assembly process No.

Adjustment of body positioner sensor

T-0090 Adjustment of body positioner sensor When the body positioner rod has been disconnected and connected or the body positioner has been removed and installed, test and adjust the body positioner according to the following procedure.

1. Testing sensor input voltage 1) Change the display of the machine monitor to the monitoring function of service mode 1 and display the body positioner sensor input voltage. q Monitoring item Code No. 34603: BODY POSITION

Monitor panel selector switches

Symbols in drawings

2) Start the engine.

3) Move the dump lever to the "lower stroke end" and "raise stroke end" and check the monitoring voltage at each stroke end. q Lower stroke end: 0.46 – 0.54 V q Raise stroke end: 4.00 – 4.70 V 2. Adjusting link length If the monitoring voltage is out of the normal range, adjust the link length according to the following procedure.

1) Loosen locknut ((1)).

2) Remove mounting bolt ((2)).

3) Rotate rod end ((3)) to adjust the link length. q The input voltage changes as follows. * If the link length is increased, the input voltage is decreased. * If the link length is decreased, the input voltage is increased. q Change of voltage per turn of rod end: Approx. 0.04 V 4) Install mounting bolt ((2)).

5) Tighten locknut ((1)).

6) Check that the input voltage is normal according to the procedure described above.

3. Calibration of system 1) Run the engine and increase the hydraulic oil temperature to 80 – 90 °C. 2) Set the dump body to the "lower stroke end" and continue "lower relief" for at least 5 seconds at this position. q Check that the body pilot lamp is turned OFF. 3) Set the dump body to the "raise stroke end" and continue "raise relief" for at least 5 seconds at this position.

4) While running the engine at low idle, raise and float the dump body 10 times. q Move the body to the stroke end by the raising operation and floating operation.

5) While running the engine at high idle, raise and float the dump body 10 times. q Move the body to the stroke end by the raising operation and floating operation.

Precautions

Necessary tools Name

Other remarks

182

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Deletion of electrical system fault history (1)

T-0100 1. Deletion of electrical system fault history While the electrical system fault history screen is displayed in the service mode, press the U switch to select an electrical system fault history item.

Monitor panel selector switches

If 0 is displayed in the place of **, there is not an electrical system fault history and deleting operation is not necessary.

If the U switch is pressed under this condition, the screen changes to the following screen.

Symbols in drawings

1-1. Deletion of fault history when there is only that history (1) Press the U switch to select an electrical system fault history, and the screen changes to the following screen.

(2) Press the U switch, and the screen changes to the history delete screen.

(3) Move the cursor with the </> switch to YES and press the t switch, and the history is deleted.

(4) If the fault history is deleted, the screen changes to the fault history screen. Check that the number of fault history is "0".

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

183

Assembly process No.

Deletion of electrical system fault history (2)

T-0110 1-2. Deletion of multiple fault histories (1) Press the U switch to select an electrical system fault history, and the screen changes to the following screen.

Monitor panel selector switches

Symbols in drawings

(2) Press the U switch and select the item screen of all electrical system fault history delete screen.

(3) Press the </> switch, and the screen changes to the all electrical system fault history delete screen.

(4) Move the cursor with the </> switch to YES and press the t switch, and all the histories are deleted.

(5) If the fault history is deleted, the screen changes to the fault history screen. Check that the number of fault history is "0".

Precautions

Necessary tools Name

Other remarks

184

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Preparation of welding body

C-0010 1. Select a place for work.

Select a place for work, secure an area of 169 m2 (13 m Ă&#x2014; 13 m) on the floor or ground. The gradient of the floor or ground must not exeed 0.05 m in 10 m.

2. Arrange the welder, generator, and tools.

3. Lift off the body (in the normal position).

Place the body on proper wood blocks.

4. Remove the right half body and protector stored in the split body.

Cut off the angle bar and plate used to fix the right half body and protector with gas.

At this time, sling the right half body and protector with a crane to prevent them from falling after the angle bar and plate are cut.

Remove the protector first, and then remove the right half body.

After lowering the right half body, cut the 2 brackets (56186-68112) tack-welded to its inside with gas.

5. Remove the paint from the parts to be welded.

Remove the paint from the range of 15 mm through along the fitting line of the body.

Burn the paint with a gas burner or scrape it with a grinder.

15

561-86-68112

15

6. Reverse the split body.

It can be reversed easily with the following.

(1) Hanging shaft (ATH-785-006) (2) Eagle clamp: For 5 ton, 2 pieces

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

185

Assembly process No.

Assembly of split body (1/2)

C-0020 1. Install the stand on ground, as shown in right figure.

2. Set the right side of the split body on the stand.

600 × 600 × 16t Stand

7,400 5,200 3. Set the left side of the split body on the stand so that the clearance will be even.

4. Fix the set body with the bolts.

(1) Tighten the set right and left half bodies temporarily with the bolts. (For the necessary parts, see the following table.)

(1) (2) (3) (4)

Part No. 01011-82010 01643-32060 01580-12016 581-74-11630

Part name Bolt Washer Nut Tube

Q'ty 5 5 5 5

Condition of part (Parts list No.) Packed separately (HD785-7-C020) Packed separately (HD785-7-C020) Packed separately (HD785-7-C020) Packed separately (HD785-7-C020)

(2) Pass the alignment shaft (ø89.3) through the hinge bracket at the bottom (See the photo at right) and check the heights and positions of the right and left half bodies.

Alignment shaft (ø89.3)

Precautions

Necessary tools Name

Other remarks

186

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Assembly of split body (2/2)

C-0030 (3) Tighten the bolts.

(4) Check that you can move the alignment shaft with the fingers.

If the split parts are off largely from each other, adjust them with a hydraulic cylinder or a wedge.

When adjusting, check that the clamping bolts are loosened.

Adjustment with wedge Precautions

Adjustment with hydraulic cylinder Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

187

Assembly process No.

Tack welding body

C-0040 1. Tack-weld the body (outside and inside).

(1) Tack-weld to a degree of 6 100 â&#x20AC;&#x201C; 500 . Tack-weld the corners and ends of weld lines.

Note) Limit the root gap at the joint of the front and bottom large plates to 3 mm (Direction on drawing: 2 mm).

(2) After tack-welding, check that you can move the alignment pint with your fingers.

(3) Remove the bolts, washers, nuts, and tube.

2. Position and tack-weld 2 brackets (561-86-68112) removed in C-0010 above to the following dimensions.

542

Front side

561-86-68112 561-86-68112 598 561-74-68112

Precautions

Necessary tools Name

Other remarks

188

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Welding body (1/2)

C-0050 1. Weld the front plate. (Refer the C-0070 and C-0080 for welding instruction.)

Apply arc welding to the front plate in vertical position. Observe the welding condition shown in Table 1 of C-0060.

2. Weld the bottom plate on the level. (Refer the C-0070 and C-0080 for welding instruction.)

Put a stand under the rear part of the bottom plate to keep the bottom plate on the level.

Stand

Bead GL 20 â&#x20AC;&#x201C; 30 mm Note) Perform back step welding at each joint of beads and at each start of welding.

Note) Weld the inside of the channels of the large plates, too.

3. Position and weld 1 plate (561-83-69411), 1 plate (561-83-69440), 2 plates (561-83-69450), 4 plates (561-83-69462), 2 plates (561-83-69521) and 1 plate (561-83-89490) to the channel steel. (For the installing positions and welding instructions, see C-0070.)

(1) (2) (3) (4) (5) (6) (7)

Part No. 561-83-69411 561-83-69450 561-83-69440 561-83-69462 561-83-89490 561-83-69481 561-83-69521

Part name Plate Plate Plate Plate Plate Plate Plate

Precautions

Q'ty 1 2 1 4 1 1 2

Condition of part (Parts list No.) Packed separately (HD785-7-C050) Packed separately (HD785-7-C050) Packed separately (HD785-7-C050) Packed separately (HD785-7-C050) Packed separately (HD785-7-C050) Packed separately (HD785-7-C050) Packed separately (HD785-7-C050)

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

189

Assembly process No.

Welding body (2/2)

C-0060 4. After finishing the welding work, remove the spatters and finish the beads with a grinder.

Table 1 CO2 gas arc welding Flat (F) JIS Z3312YGW11 or equivalent AWS ER70S-G and equivalent ø 1.2, 1.6 Welding current (A) 320 – 350, 380 – 420 Preheating/Postheating Unnecessary Gas shielding rate (l/min) 25 – 35

Welding position Welding rod

Precautions

Arc welding Remarks Flat, vertical (V) (1) Do not apply CO2 gas welding when wind velocity is higher than 2 JIS Z3212D5816 – 3 (m/sec). or equivalent AWS E8016-G and (2) Remove moisture, dust, and paint from surfaces to be welded. equivalent (3) Drying time of arc welding rod ø 4.0, 5.0 1] Temperature: 150 – 200°C 130 – 160, 220 – 260 2] Time: 120 minutes Unnecessary —

Necessary tools Name

Other remarks

190

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Welding body instruction (1/2)

C-0070 Welding body instruction (1/2) Welding instructions are shown in Procedure for welding body (2/2) (C-0080)

Weld cross rib (inside of channel), too.

Weld cross rib (inside of channel), too.

Precautions

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

191

Assembly process No.

Welding body instruction (2/2)

C-0080 Welding body instruction (2/2)

690 Âą 1.5

Precautions

NTightening torque:

arks

192

Assembly process No.

Turn over the body

C-0090 1.

Remove the stands (8 pieces) for transportation installed to the bottom plate.

Stand for transportation

2.

Reverse the body (1) Prepare a 50-ton crane and a 20-ton crane. (Set the crane trucks as near the body as possible.)

(2) Insert the lifting pins (ATH-785-006) from inside of the body into the body and install 2-pieces chains (ATH465-040) with shackles. (2 places each on right and left sides, 4 pieces in total) (3) Taking care of the center of gravity, wind in the 50-ton and 25-ton cranes simultaneously. (Secure the space for reversing the body.)

(4) Taking care of the center of gravity, wind in the 50-ton crane and wind out the 25-ton crane to lay the body on its side.

(5) Keep holding up the body with the 50-ton crane, remove the sling from the 25-ton crane, move the 25-ton crane to the opposite side and install the sling to the 25-ton crane.

(6) Taking care of the center of gravity, wind in the 25-ton crane and wind out the 50-ton crane.

(7) After the body becomes horizontal, wind out both cranes simultaneously to lower the body to the ground and then remove the slings. At this time, put wooden blocks under the front and rear of the bottom plate.

(1)

(2)

(3)(4)

(5)

(6)

(7)

(4)

(7)

Next, weld the inside of the bottom plate.

Connect the welding ground cable to the body securely.

Apply CO2 gas shielded arc welding as standard. If it is difficult to apply CO2 gas shielded arc welding, apply arc welding.

Table 1 Welding position Welding rod

Welding current (A) Preheating/Postheating Gas shielding rate (l/min)

CO2 gas arc welding Flat (F) JIS Z3312YGW11 or equivalent AWS ER70S-G and equivalent ø 1.2, 1.6 320 – 350, 380 – 420 Unnecessary 25 – 35

Precautions

Arc welding Remarks Flat, vertical (V) (1) Do not apply CO2 gas welding when wind velocity is higher JIS Z3212D5816 than 2 – 3 (m/sec). or equivalent AWS E8016-G and equivalent (2) Remove moisture, dust, and paint from surfaces to be ø 4.0, 5.0 welded.

130 – 160, 220 – 260 (3) Drying time of arc welding rod Unnecessary 1] Temperature: 150 – 200°C — 2] Time: 120 minutes

Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

193

Assembly process No.

Welding body protector (1/2)

C-0100 1. Weld the protector.

(1) Place the protector on the tops of the side plate and front plate with a crane.

Capacity of crane: Min. 2 tons Lift of crane: Min. 7 m Breaking strength of wire rope, chain, chain block: Min. 2 tons (2) When positioning the protector, set the protector plate parallel to body side plate.

(3) Cut the front and side plates of the protector with gas so that the top of the body side plate and will be in parallel with the top of the protector.

Note: Since the protector and front plate are distorted by welding as shown below, the front and side plates of the protector must be cut with gas so that the clearance will be minimized at the time of welding. (Reduce the clearance to below 3 mm.)

(4) After positioning, tack-weld the front panel of the protector.

If any plate is used to secure the protector, remove it with a gas cutting device or a grinder.

CO2 gas arc welding Flat (F) JIS Z3312YGW11 or equivalent AWS ER70S-G and equivalent ø 1.2, 1.6 Welding current (A) 320 – 350, 380 – 420 Preheating/Postheating Unnecessary Gas shielding rate (l/min) 25 – 35

Welding position Welding rod

Precautions

Arc welding Remarks Flat, vertical (V) (1) Do not apply CO2 gas welding when wind velocity is higher than 2 JIS Z3212D5816 – 3 (m/sec). or equivalent AWS E8016-G and (2) Remove moisture, dust, and paint from surfaces to be welded. equivalent (3) Drying time of arc welding rod ø 4.0, 5.0 1] Temperature: 150 – 200°C 130 – 160, 220 – 260 2] Time: 120 minutes Unnecessary — Necessary tools Name

Other remarks

194

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Welding body protector (2/2)

C-0110 1. Weld the protector.

Welding order: Weld the side plate first.

Welding symbol: Follow welding instruction drawing below.

Welding condition: Follow welding condition table below.

Perform welding according to KES04.343, General, 2nd Grade.

2. Tack-weld the right and left triangular plates (Section C-C shown below) and then weld them permanently.

X→

View X

Apply CO2 gas shielded arc welding as standard. If it is difficult to apply, however, apply arc welding.

CO2 gas arc welding Flat (F) JIS Z3312YGW11 or equivalent AWS ER70S-G and equivalent ø 1.2, 1.6 Welding current (A) 320 – 350, 380 – 420 Preheating/Postheating Unnecessary Gas shielding rate (l/min) 25 – 35 Welding position Welding rod

Precautions

Arc welding Remarks Flat, vertical (V) (1) Do not apply CO2 gas welding when wind velocity is higher than 2 JIS Z3212D5816 – 3 (m/sec). or equivalent AWS E8016-G and (2) Remove moisture, dust, and paint from surfaces to be welded. equivalent (3) Drying time of arc welding rod ø 4.0, 5.0 1] Temperature: 150 – 200°C 130 – 160, 220 – 260 2] Time: 120 minutes Unnecessary — Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

195

Assembly process No.

Finishing and painting welded parts of body

C-0120 1. Finishing Remove the spatters and finish the beads with a grinder. Cut the hanging plate welded to the top of the body with gas and finish the marks of weld with a grinder.

2. Check the welded parts for defects.

(1) Crack of weld bead (visual check) (2) Undercut, overlap, and spatter (3) Leg length of weld for shortage (Insufficient leg length is not permitted.)

3. After cooling, paint the welded parts.

(1) Mix the base and hardener of the paint well at the ratio of 5:1 as specified.

(2) After painting, clean the paint spray gun with paint thinner before the paint is hardened.

Put on mask, goggles, gloves, etc. to protect yourself from paint mist.

[Undercoat paint] RETAN GP primer RETAN GP hardener RETAN GP thinner [Top coat paint] NAX MIGHTYLAC G II KB natural yellow NAX MIGHTYLAC G II KB hardener NAX MIGHTYLAC G II KB thinner

Precautions

Necessary tools Name

Other remarks

196

Q'ty

Necessary equipment Name Q'ty

Assembly process No.

Welding front body mount bracket

C-0130 Weld the front body mount bracket.

1. Install the body to the frame and adjust its dumping posture. (For the method of installing the body, see Assembly Manual No. 0650 – 0730.)

2. Adjust the distance between the body and frame with shims in advance. (See Assembly Manual No. 0720.)

3. Position the front body and mount bracket properly and weld them. For the welding condition, see Table 1.

Place bracket (561-46-8A870) on the right of the frame (rear support) and place bracket (561-468A890) on the left and then measure the clearance between the body and bracket at 4 places.

If the clearance is 57 mm or less, cut the lower part of the bracket (hatched part).

(See the following figure.)

4. Position the front body mount bracket properly and weld it.

Zo

A Left figure shows 561-46-8A890 (LH), which is symmetrically identical to 561-46-8A870 (RH).

If less than 57 mm, cut hatched part.

View Z

Detail of A

Table 1 CO2 gas arc welding Flat (F) JIS Z3312YGW11 or equivalent AWS ER70S-G and equivalent ø 1.2, 1.6 Welding current (A) 320 – 350, 380 – 420 Preheating/Postheating Unnecessary Gas shielding rate (l/min) 25 – 35 Welding position Welding rod

Precautions

Arc welding Remarks Flat, vertical (V) (1) Do not apply CO2 gas welding when wind velocity is higher than 2 JIS Z3212D5816 – 3 (m/sec). or equivalent AWS E8016-G and (2) Remove moisture, dust, and paint from surfaces to be welded. equivalent (3) Drying time of arc welding rod ø 4.0, 5.0 1] Temperature: 150 – 200°C 130 – 160, 220 – 260 2] Time: 120 minutes Unnecessary — Necessary tools Name

Q'ty

Necessary equipment Name Q'ty

Other remarks

197

1/8 Report No.

Field assembly inspection report After completion of assembling a machine, make inspections according to these check sheets for assuring machine performance and quality.

Model-Type

Machine Serial No.

User Unit No.

Engine Model

HD785-7 Service Meter Reading

Engine Serial No.

SAA12V140E-3B Date of Inspection Attachment 1

2

Location of Machine at Inspection Manufacture

Model Distributor's Name Serial No.

Customer's Name

Address:

Signature:

Delivery Report No. attached

Date: Inspector's Comments:

Inspector's Name:

KOMATSU USE ONLY

:

C. Sheet Receiving Date :

Title

By Signature:

:

Remark:

Check sheets filling instructions:

1. Use following indexes for entry of judgement

T..... Normal T..... Abnormal 2. Enter actually measured values in parenthese, [

T ..... Correction made on abnormal point T..... Not applied ].

Notes:

(1) Criteria are based on the standards when the machine is shipped out of the factory.

SUBMITTANCE OF THIS REPORT (AND CHECK SHEETS) TO KOMATSU IS ONE OF THE CONDITIONS OF WARRANTY VALIDATION, COPY FOR KOMATSU SHALL BE FORWARDED TO THE KOMATSU REGIONAL OFFICE TOGETHER WITH THE COPY OF DELIVERY SERVICE REPORT.

Printed in Japan

2/8

No.

Inspection item

Judgment procedure and standards

Check

Maintenance Remarks

Record the serial Nos. of the component parts.

1

Cab assembly No.

Enter the No. (No. ) * No. is stamped on floor (near left door bottom).

2

Front axle Nos.

Enter the Nos. (Left: ) (Right: * No. is stamped on front suspension cylinder.

3

Rear axle No.

Enter the No. (No. ) * Nameplate of No. is installed to differential case.

)

Check the oil and water levels. (Check before starting engine.)

4

Engine oil level (Check with engine stopped)

Level must be between (H) and (H-10 mm).

(Check with oil level gauge.)

5

Hydraulic oil level

Level must be within inspection window range.

6

Transmission oil level (1)

Level must be above (L) of gauge (engine stop position).

7

Brake oil level

Level must be in range of brake oil tank gauge.

8

Coolant level

The level must be above the midpoint between Full and Low of the sub-tank.

9

Battery fluid level

The fluid level must be 10 â&#x20AC;&#x201C; 12 mm above the plates.

10 Windshield washer fluid level

The fluid level must be above 2/3 of the tank.

Turn switch ON. 11 Function of horn

Sound must be proper in volume and must not have beat noise.

(Sensory check)

12 Function of back buzzer

Sound must be proper in volume and must not have beat noise.

(Sensory check) When wiper switch is turned to [LO] or [HI], wiper must operate.

(Wiping speed must change between LO and HI.) When wiper switch is turned to [INT], wiper must operate intermittently.

13 Function of windshield wiper

Wiping range must be proper. (Wiper must not project from glass.)

When wiper switch is turned to [OFF], wiper must stop at stopping position automatically. (Wiper must stop at proper position.)

When windshield washer switch is turned to [ON], washing fluid must be splashed over glass and wiper must operate. (Washing fluid must be splashed over proper position.)

14 Safety function (1)

When key switch is turned to START position while transmission shift lever is not in N, engine must not start.

15 Safety function (2)

When the parking brake switch is ON and the transmission shift lever is not in N, the centralized warning lamps and alarm buzzer must be turned ON.

Start the engine. (Before starting the engine, check the safety around the truck. Measure each item after warm-up operation.)

16 Abnormal noise from engine

No abnormal noise must be generated. (Sensory check)

Safety function (3) 17 * Check with engine started and parking brake turned off.

When dump lever is set to any position other than FLOAT and transmission lever is set to any position other than N position, centralized warning lamp must light up and centralized alarm buzzer must sound.

3/8

No.

Inspection item

Judgment procedure and standards

Check

Safety function (4) While dump lever is not in FLOAT position, transmission shifts to 18 * Check after starting engine and D – L but does not shift to R. turning parking brake OFF. Safety function (5) 19 * Check with engine started and parking brake turned off.

When body is not seated and transmission lever is shifted to D – L, "only 2nd speed must be selected at D and only 1st speed must be selected at 5 to L"

20 Function of engine cooling water temperature gauge

As cooling water temperature rises while engine is running, bar meter must move toward High side.

Function of torque converter oil 21 temperature gauge

As oil temperature rises while engine is running, bar meter must move toward High side.

Function of brake oil temperature 22 gauge of retarder, bar meter must When brake oil temperature rises because of operation of retarder, bar meter must move toward High side. move toward High side.

23

Engine speed * Engine coolant temperature: In green range * Engine oil temperature: 70 – 80 °C 24 * Torque converter oil temperature: 70 – 80 °C * If method of measuring engine speed is unknown, see Shop 25 manual, Testing and adjusting, Measuring engine speed.

26

Measure with parking brake ON, accelerator pedal OFF, and AISS switch ON. Standard: 625 – 675 rpm Low idle speed, Measured value: ( ) rpm Measure with parking brake ON and body seated (float caution lamp OFF) in power mode.

Standard: 2,200 – 2,300 rpm High idle speed, Measured value: ( ) rpm Engine speed at torque converter stall - Measured value: ( rpm) Power mode standard: 1,735 ± 100 rpm Engine speed at torque converter stall - Measured value: ( rpm) Economy mode standard: 1,635 ± 100 rpm

27 Engine acceleration time (LiL o Hi), in power mode

Standard value: Max. 3.5 sec, Measured value: ( • HD785: LiL o Hi × 0.95 (LiL o 2,100 rpm)

) sec

28 Engine acceleration time (LiL o Stall), in power mode

Standard value: Max. 6.0 sec, Measured value: ( • HD785: LiL o Hi × 0.95 (LiL o 1,700 rpm)

) sec

29

When AISS switch is turned ON, low idling speed of engine must be set to LiL (650 rpm). * Regardless of engine water temperature and operation of brake.

30

Function of AISS

While AISS switch is turned OFF, if engine water temperature is below 50 °C, low idling speed of engine must be kept at LiH (945 rpm).

31

While AISS switch is turned OFF, if engine water temperature is above 50 °C, low idling speed of engine must be kept at LiL (650 rpm). If parking brake and retarder brake are both turned OFF at this time, low idling speed of engine must be set to LiH (1,000 rpm).

32 Low idling regulation

When truck is steered to end, engine must not stop at low idling speed. Engine oil pressure caution lamp must not light up.

33 Exhaust gas color

Exhaust gas color must be proper during sharp acceleration (Li o Hi). (Sensory check.)

34 Exhaust gas leakage

Exhaust gas must not leak from exhaust pipe joint, exhaust shutter, etc.

Check the lamps.

35 Function of clearance lamps

When the lamp switch is turned ON (1st/2nd stage), both front lamps and 3 rear lamps (right, center, and left) must light up.

36 Check of head lamp

When the lamp switch is turned ON (2nd stage), the head lamps (1 lamp on each side) must light up.

37

Check of high beam (Function of dimmer switch)

When the head lamp is turned ON and the dimmer switch is operated, the number of the lamps must change between 2 and 4. (The lighting direction must change.)

38 Function of turn signal lamps

When the turn signal lever is operated, the front and rear turn signal lamps in the turning direction must flash.

39 Function of hazard lamp

When the hazard switch is turned ON, both turn signal lamps and pilot (arrow) lamp in the cab must flash.

Mainte- Remarks nance

4/8

No.

Inspection item

Judgment procedure and standards

40 Function of backup lamp

When the transmission shift lever is in R, the backup lamp must light up.

41

When the brake pedal is pressed, the 3 red brake lamps (Right, center, and left) must light up.

42 Function of brake lamp

When the retarder lever is pulled, the 2 red brake lamps (Right and left) must light up. The center brake lamp must not light up at this time.

43

When the lamp switch is turned ON and the brake is used, the brightness of the brake lamp must change (increase).

44 Function of emergency brake

When emergency brake is pressed while parking brake is ON, brake lamp must not light.

45 Function of room lamp

When the switch is turned ON. Must light up when cab door is open.

46 Function of working lamp

Lamp must light up when switch is turned ON (Right and left sides).

Check

Mainte- Remarks nance

Lamp must light up when switch is turned ON (Right and left 47 Function of fog lamp (If equipped) sides).

Drive and check truck. (Before checking the following items, check the safety around the truck.)

48

Abnormal noise from transmission

No abnormal noise must be generated. (Sensory check)

49 Abnormal noise from differential

No abnormal noise must be generated. (Sensory check)

50 Dragging of power train

When engine speed is set to high idling in N-range, truck must not start.

51 Straight travel of truck

While machine is traveling, control of steering wheel is not lost.

52 Braking mode function

When shift lever is set to D with brake turned ON (rear brake pilot lamp turned ON), gear speed must not change from F2.

53

(1) When lockup operates and brake is turned ON (rear brake pilot lamp lights up), exhaust brake must operate (regardless of operation of exhaust brake switch).

Function of exhaust brake 54 (If equipped)

(2) When lockup operates and accelerator pedal is turned OFF, exhaust brake must operate (only when exhaust brake switch is ON).

55

When (1) or (2) occurs, exhaust brake pilot lamp must light up.

56 Heating of front brake discs (Both After truck travels inside yard, check by touching with hand that sides) front brake discs are not heated.

Heating of rear axles (Both sides) After driving in yard, check by feeling that axle housing and final 57 brake drive cover are normal.

58

Drainage through floating seal (All width)

After machine travels in yard, oil of abnormal quantity must not be drained through seal. * Check with drain plug removed.

(Reference: After 60-minute travel, oil must not be drained more than 100 cc from each side.)

Check the brake. (Before checking, confirm the safety around the machine.)

59 Uneven working of service brake When machine is stopped suddenly with service brake, it does not turn and control of steering wheel is not lost.

When retarder brake is applied sharply, truck must not turn and 60 Uneven working of retarder brake steering wheel must not turn by itself. *** Method of checking No. 27 â&#x20AC;&#x201C; 30 (start limit value) *** (1) Operate the brakes to be checked (Release other brakes).

(2) Set the transmission shift lever in the D range.

(3) Press the accelerator pedal gradually and read the engine speed when the machine starts.

(4) If the machine does not start when the engine speed reaches the torque converter stall speed in the D range (F2), return to (2) and set the transmission shift lever in the 6 range (F1), and then check.

[Precautions] 1. When operating the transmission shift lever, set the engine speed to low idle.

2. Check the oil temperature gauge frequently and take care that the torque converter oil will not be overheated.

5/8

No.

Inspection item

Judgment procedure and standards

61 Function of parking brake

When the engine is stalled at F2 (above 1,610 rpm), the truck must not start. Enter start limit value.

Measured value (F : rpm)

62 Function of service brake

When the engine is stalled at F2 (above 1,570 rpm), the truck must not start. Enter start limit value.

Measured value (F : rpm)

63 Function of retarder brake

When the engine is stalled at F2 (above 1,200 rpm), the truck must not start. Enter start limit value.

Measured value (F : rpm)

64

When emergency brake (left pedal) is pressed, service brake and parking brake must operate. (Check that pilot lamp lights.)

65 Function of emergency brake

When emergency brake (left pedal) is pressed, central warning lamp and caution buzzer must operate.

66

Enter the start limit.

Measured value (F :

Check

Mainte- Remarks nance

rpm)

Check steering function.

67 Abnormal noise and vibration in steering operation

No abnormal noise must be generated. (Sensory check)

68 Smooth steering operation

There must be no hitch and operating effort must not change.

(Sensory check)

69 Steering effort (When empty)

Steering effort must not be heavy. (Sensory check) Standard: Max. 29 N {3 kg}

70 Play of steering wheel

Standard: Max. 150 mm – With engine stopped, measure peripheral length of steering wheel.

Measured value: ( ) mm

71

Lock-to-lock turns of steering wheel

72 Steering speed (Lock-to-lock time)

Standard: 3.1 – 3.8 turns Measured value: Left (

) turns, Right (

) turns

(1) Standard: Max. 4.0 sec (Engine speed: 650 rpm) Turning to left ( ) sec, Turning to right ( ) sec

73

(2) Standard: Max. 3.6 sec (Engine speed: Constant speed above 1,500 rpm) Turning to left ( ) sec, Turning to right ( ) sec

Automatic emergency steering 74 function

When key switch is ON and parking brake is OFF, emergency steering system must operate (for at least 24 seconds). * Do not operate emergency steering pump for more than 90 seconds continuously.

75 Emergency steering effort

Steering effort must not be heavy. (Sensory check) Reference: Max. 29 N {3 kg}

Emergency steering speed 76 (Oil temperature: 80 °C Atmospheric temperature: 25 °C)

Standard: Max. 12.0 sec (With battery charged fully) Turning to left ( ) sec, Turning to right ( ) sec

Check the functions of the work equipment.

[Note] Before checking, correctly carryout Assembling and adjusting dump sensor, "Field assembly manual". If the work equipment is operated without carrying out correctly, the original performance is not obtained. In the worst case, the dump sensor potentiometer and linkage (rod) may be broken.

77 Check of potentiometer voltage * Check with real-time monitor.

78

79

Check of function of body operation caution lamp

Potentiometer voltage at lowering end (when body is seated) Measured value: ( )V Standard value: 0.46 – 0.54 V (Target: 0.50 V) Potentiometer voltage at raising end (stroke end) Measured value: ( )V Standard value: 4.00 – 4.70 V When the dump lever is not in FLOAT or when the body is not seated, the body operation caution lamp must light up.

80 Operating effort of dump lever

The operating effort must be proper and dump lever must not be hitched. Check by sensory evaluation.

81 Shock made when dump body is lower to end

When dump body is seated, unpleasant shock must not be made. (Sensory check)

6/8

No.

Inspection item

Judgment procedure and standards Operate lever to RAISE position and check that it does not return to HOLD when released.

82 Function of body positioner 83

Operate lever to RAISE position to raise dump body and check that it automatically returns to HOLD at a point 50 – 100 mm before end of hoist cylinder stroke.

84

When dump body is raised fully, it must not sway to right or left.

Alignment of dump body on right 85 and left

When dump body is lower fully, it must come in contact with mount evenly. (Contact area must be at least 80 %.)

86

When dump body is lower fully, it must come in contact with vibration stopper evenly.

Body lifting speed (Oil tempera87 ture: 80 °C)

Engine speed: 2,000rpm Measured value: ( ) sec, Standard: 13.0 ± 1.5 sec

Body lowering speed (Lever at 88 FLOAT, Oil temperature: 50 – 70 °C)

Engine speed: Low idling speed Measured value: ( ) sec, Standard: 14.0 ± 1.5 sec

89 Hydraulic drift of dump body

Hydraulic drift in 5 minutes must be 85 mm or less.

(From point where cylinder No. 2 is extended by 100 mm) Measured value: (Left: ) mm, (Right: ) mm

Stop the truck on level ground and measure.

90 Transmission oil level (2) (Low idle level)

Level must be between (H) – (intermediate point between H – L) of gauge (on low idle side). * Warm up machine before checking.

The length must be in dimension A. Dimension A: Length of suspension cylinder 247 (Center of label) ± 10 mm 91 (Front) Measured value: * Measure with dump body empty. Left ( mm), Right ( mm) The length must be in dimension A. Dimension A: 199 ± 10 mm Measured value: Left ( mm), Length of suspension cylinder Right ( mm) 92 (Rear) Dimension A: From rod head * Measure with dump body empty. shoulder of suspension cylinder to top of flange

93

(1): When the dump lever is set to any position other than FLOAT, display must change from [Soft] to [Hard].

94

(2): When the service brake or emergency brake is turned ON, the display must change from [Soft] to [Medium].

Check of automatic suspension control function (Optional) 95 Measure with dump body empty.

96

(3): The display must show [Soft] in all cases other than (1) and (2) above.

Operations of cylinder link installed to front axle must be same as display in cab. * Cylinder link position: "Soft o Upper", "Hard o Middle", "Medium o Lower"

Inspect each part.

97 Function of body lock pin

The safety pin must be inserted without obstruction in the right and left stopper holes.

98 Storage function of body lock pin The safety pin must be removed from, installed to, and locked at the storage position securely.

99 Installation of drive shaft (Engine o Torque converter)

All mounting bolts must be free from looseness and abnormal play.

100 Installation of drive shaft (Transmission o Differential)

All mounting bolts must be free from looseness and abnormal play.

101 Engine mount

Mounting bolts must be free from looseness.

Check

Mainte- Remarks nance

7/8

No.

Inspection item

Judgment procedure and standards

102 Transmission mount

Mounting bolts must be free from looseness.

103 Operator's cab mount

Mounting bolts must be free from looseness.

104 Rear support

Mounting bolts must be free from looseness.

105 Hydraulic tank

Mounting bolts must be free from looseness.

107 Inspection around engine

No oil and water leakage.

108 Inspection around transmission

No oil leakage.

109 Fuel leakage from fuel system

No leakage.

110 Oil leakage from hydraulic oil sys- No leakage. tem (tank, cylinder, pump, piping) 111

Oil leakage from transmission system

No leakage.

112

Oil leakage from torque converter system

No leakage.

Oil leakage from differential and 113 final drive system

No leakage.

114 Oil leakage from brake system

No leakage.

115 Oil leakage from steering system No leakage.

116 Oil leakage from suspension (Both sides, front)

No leakage.

117 Oil leakage from suspension (Both sides, rear)

No leakage.

118 Car radio antenna (Front of cab)

Antenna must be free from harmful flaw.

119

Rear view mirror, under mirrors (Both sides)

120 Tension of fan belt

Must not be loosened.

When belt is pushed with thumb (approx. 59 N {6 kg}), its deflection must be 7 â&#x20AC;&#x201C; 10 mm. Belt must be free from flaw and twist.

Deflection of air conditioner com- When belt is pushed with thumb (approx. 59 N {6 kg}), its deflec121 pressor belt tion must be 10 â&#x20AC;&#x201C; 15 mm. Belt must be free from flaw and twist.

122 Installation of battery

Double nuts for installation of battery must be tightened.

123 Tightness of battery terminals

Terminals must not move when swing with hand.

124 Rubber caps of battery terminals and positive cable (+)

Must be installed securely.

125

(1) Airflow must be changed to 4 levels with blower switch.

126

(2) When air conditioner switch is turned ON after blower switch is turned ON, cab must be cooled and dried.

127 Function of air conditioner

(3) When temperature control switch is set to green side, cold air must come out. When former is set to red side, hot air must be come out.

128

(4) Fresh air or circulating air must be selected with fresh/circulating air selector switch.

129

(5) Air outlet must be set to "Vent", "Vent & foot", "Foot", "Defrost & Foot", or "Defrost" with air outlet selector switch.

Check

Mainte- Remarks nance

8/8

No.

Inspection item

130

Judgment procedure and standards (1) Front left: Retighten.

Tightness of tire hub nuts 131 Tightening torque: 1,519 – 1,617 Nm {154.8 – 164.8 kgm} (Target: 1,568 Nm {159.8 kgm}) 132 * When nothing is applied to the threads.

(2) Front right: Retighten.

(3) Rear left: Retighten.

133

(4) Rear right: Retighten.

134

Standard: Shown at left Measured value: Front left ( Front right (

Tire inflation pressure 135 (When dump body is empty) 27.00-R49: 0.686 – 0.715 MPa 31/90R49 E4 (OP): 0.686 MPa

Standard: Shown at left Measured value: Rear left inside ( Rear right inside (

136

Standard: Shown at left Measured value: Rear left outside ( Rear right outside(

137 Flaw of tires

The tires must be free from flaw and tear. Check the all 6 tires.

MPa), MPa) MPa), MPa) MPa), MPa)

Check the external appearance after painting (touching up) in the field.

138 Steering cylinders (Both sides)

The plated surfaces must be free from rust, harmful flaw, spatter, paint, etc.

139 Hoist cylinders (Both sides)

The plated surfaces must be free from rust, harmful flaw, spatter, paint, etc.

Suspension cylinders (Both sides, The plated surfaces must be free from rust, harmful flaw, spatter, 140 front) paint, etc.

141

Suspension cylinders (Both sides, The plated surfaces must be free from rust, harmful flaw, spatter, rear) paint, etc.

142 Appearance of cab glass

Glass must be free from flaw, paint, etc.

Check

Mainte- Remarks nance

HD785-7

DUMP TRUCK

Form No. GEN00119-01

©2012 KOMATSU All Rights Reserved Printed In Japan 08-12