Electrical system Special functions of machine monitor (EMMS) Machine monitor mode and flow of function (List of functions) Operator mode 1 Service meter and odometer display function (Standard operator mode screen) UOIt 2 Operation information display (ON-OFF of display in service mode) >OI < 3 Reverse travel odometer display function Service mode o t < + [ID] 11 12 13 i t 14 >OI< Maintenance monitor function and filter/oil 4 replacement time display function >OI< 15 5 Telephone number input function 16 >OI< 6 Language selecting function 17 >OI< Speedometer or Gear speed display selection 7 function (*1) >OI< 18 8 Monitor brightness adjusting function 19 O [Automatic] 9 Action code display function 20 21 >O 10 Failure code display function 22 Display function of electrical system failure history [ELECTRIC FAULT] >OI< Display function of mechanical system failure history [MACHINE FAULT] >OI< Real-time monitoring function [REAL-TIME MONITORING] >OI< Cylinder cutout test mode [CYLINDER CUT-OUT] >OI< No Injection Cranking Function [NO INJECTION] >OI< Adjusting function [TUNING] >OI< Maintenance monitor function [MAINTENANCE MONITOR] >OI< Operation information display function [OPERATION INFO] >OI< Option selecting function [OPTIONAL SELECTION] >OI< Forced low idle operation function [ENG LOW IDLE] >OI< Torque converter stall function [T/C STALL] >OI< Initializing function (exclusive for factory) [INITIALIZE] Operator mode a No.2 to 8 are displayed endlessly according to the switch operation. a When a failure occurs, the display automatically shanges to No.9 regardless of the display of No.1 to 8. a If the switch operation is not performed for 30 seconds or longer regardless of the current display, the display automatically: q changes to No. 1: When no failure is occuring, q changes to No. 9: When a failure occures. a If the display is changed from No. 10 to No.1 by the switch operation, and if the switch operation is not performed for 10 seconds or longer, the display automatically shanges to No. 9. Service mode a The No.11 to No.22 are displayed endlessly according to the switch operation. a ID, once input and entered, is valid until the starting switch is turned OFF whichever mode the mode is switched to. *1: This function is displayed only when the optional non-SI unit system is selected at the time of shipment from the factory. 30-106 GD555-5,GD655-5,GD675-5 (01)