de 2 Pm clinic auxiliary mode [U] (W) 3 Error code display mode [T] 4 Adjustment mode 1 Maintenance mode [>] Travel direction/Gear speed + Shift mode/Service meter [>] [>] [>] (Automatic) Maintenance item: 12 items [<] Auxiliary menu: 11 items [<] [<] Adjustment menu: 5 items [<] Action code display function [ON] & [U](W) [T] Service mode 5 Maintenance interval change mode [>] 6 Maintenance item: 12 items [<] Electric system error code display mode [>] [<] Mechanical system error code 7 display mode [>] 8 [<] Adjustment mode [>] [<] 9 Load memory display mode [>] Adjustment menu: 22 items Display menu: 9 items [<] 10 Real-time monitoring mode [>] [<] 11 Dual display monitoring mode [>] [<] Maintenance interval change 5 mode D275AX-5E0 [ON] [U]: [T]: [ > ]: [ < ]: (W): Service switch Buzzer cancel switch (Left) Buzzer cancel switch (Right) Information switch (Right) Information switch (Left) Min. 2.5 sec 310c:T6d6,SEN01416-02 Operation and display in operator mode (Outline) a In this section, only the outline of the operation mode is described. For the details of the contents and operation method of each function and mode, see "Operation Manual". Normal display mode (Default) The monitor panel displays the following information normally. Gear speed display section (1): q Left side: Travel direction (P · N · F · R) q Right side: Gear speed (1 · 2 · 3) q Graphics: Engine speed Multi-information section (2): a Information is displayed in 2 lines of 16 characters each. q Left side: Gear shift mode (F1-R1 · F1-R2 · F2-R2) q Right side: Service meter (Unit: 0.1h) a To change the normal display mode to the operator mode, hold buzzer cancel switch (4) in the [U] position for 3 seconds. Serial No.: 30001 – 30131 30 Testing and adjusting 1. Maintenance mode (1-OIL, FILTER MAINTENANCE MODE) In this mode, the time up to the next replacement of oils and filters is displayed on the multi-information section (2) and to update the maintenance history. a Gear speed display