JLG GRADALL 534B-6 534B-8 Telehandler Parts Manual - PDF DOWNLOAD

Illustrated Parts Manual Models 534B-6 534B-8 S/N 8344001L thru 0144870S P/N - 9020-7316 Revised July 6, 2007

FRAME SHROUDING AND TRIM Starting Serial No. 0144687J Revised 6-25-99

18

4 2

8

7

11 12

16

14

10

20

13

17

15 19

1

25

43 9 41

6

40 3

5

36

22

42

24

39 37 38

23 21

26

31 27

32 29 35 34

30

33 28

JJ

* Changed page number on second page of 2-1 from 2-1.1 to 2-1.

2-1

1st & 2nd BOOM SECTIONS Starting Serial No. 8344001L Revised 11-08-05

*NOTE: When ordering items no. 2,4,6,10,23, & 27 bearings for machines prior to S/N 8544678, new mounting hardware must also be purchased to match with fine thread bearings.

JD

* Revised illustration and changed items 42 thru 45.

3-1

1st & 2nd BOOM SECTIONS Starting Serial No. 8344001L Revised 11-08-05 Item

Part No.

Qty.

1

9103-6035

1

*

9103-5148

1

9103-6070 9103-1384 9103-6036 9020-5870 9103-1236 9103-3190 9103-1237 9020-5497 9103-3186 9103-3189 9103-3188 9103-3184 8820-1533 8820-1532 8820-1566 8820-1067 9103-1234 9002-8935 9020-7352 8820-1563 8820-1534 9020-7029 9103-1235 9020-7030 9103-1383 8850-1010 9020-6892 8820-1105 8850-1010 9040-3280 8820-1106 9103-1369 9060-2842 9002-8965 8850-1008 9040-3212 8508-1016 0510-1441 9103-1163 8850-1116 8820-1069 8540-1340 9040-3352 8856-1109 9020-3959 9020-7575 8856-1109 8850-1004 9103-3185

1 2 1 12 12 6 12 12 4 2 2 2 8 12 6 2 2 2 1 12 4 2 4 4 2 3 3 3 1 1 1 2 1 1 2 1 2 2 1 1 2 2 1 4 4 1 2 2 2

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

42 43 44 45

Description Of Part 1ST BOOM SECTION (thru serial no.

8744141G) 1ST BOOM SECTION (starting serial no.

8744142G) BOOM WELDMENT BUSHING 2ND BOOM SECTION SLOTTED SHIM PUNCHED HOLE SHIM BEARING PUNCHED HOLE SHIM SLOTTED SHIM BEARING BEARING BEARING BEARING HEX HD CAPSCREW, 3/8-24x7/8 Gr5 HEX HD CAPSCREW, 3/8-24x3/4 Gr5 HEX HD CAPSCREW, 1/2-20x1-1/2 Gr5 HEX HD CAPSCREW, 1/2-13x1-1/2 Gr5 PUNCHED HOLE SHIM SNAP RING CROWD CYLINDER ROD PIN HEX HD CAPSCREW, 1/2-20x7/8 Gr5 HEX HD CAPSCREW, 3/8-24x1, Gr5 SLOTTED SHIM PUNCHED HOLE SHIM SLOTTED SHIM SHIM HEX NUT, 5/8-11 CROWD BASE & LIFT ROD PIN HEX HD CAPSCREW, 5/8-11x4, Gr5 HEX NUT, 5/8-11 BOOM BASE PIN HEX HD CAPSCREW, 5/8-11x4-1/2 Gr5 BUSHING STRONGBACK HEX NUT, 1-8 HEX NUT, 1/2-13 CROWD CYLINDER HANGER CAPSCREW HARDENED WASHER STOP BAR HEAVY HEX JAM NUT, 1-8 HEX HD CAPSCREW, 1/2-13x2, Gr5 WASHER BOOM COVER FLAT WASHER, 3/8 WING BOLT TIE DOWN CORD FLAT WASHER, 3/8 HEX NUT, 1/4-20 BEARING

*NOTE: For service replacement of 1st section boom on units with serial no. 8744142G thru 0144297J excluding machine 0144263J, provide 9103-5148 1st section boom, consisting of 9103-6070 weldment and two 9103-1384 bushings.

JD

* Revised illustration and changed items 42 thru 45.

3-1

1st & 2nd BOOM SECTIONS Starting Serial No. 0144298J Also Machine Serial No. 0144263J Original Issue 2-8

Revised 11-08-05

JD

* Revised illustration and removed item 17.

3-1

1st & 2nd BOOM SECTIONS Starting Serial No. 0144298J Also Machine Serial No. 0144263J Original Issue 2-88 Revised 11-08-05

JD

Item

Part No.

Qty.

Description Of Part

1 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 * 17 18 19 20 21 22 23 24

9103-6070 9103-1163 0510-1441 8320-1053 9060-2842 8540-1340 8820-1069 9002-8965 8850-1116 9040-3352 8856-1109 9020-3959 9103-1389 9103-1371 8348-1645 8852-1010 9020-6892 8320-1044 Not Used 9103-3185 9103-1236 9020-5870 8856-1109 8820-1533 9040-3212 8820-1067

1 1 2 3 1 2 2 1 1 1 4 4 1 2 1 4 3 3

1st BOOM SECTION STOP BAR HARDENED WASHER HEX HD CAPSCREW, 1-8x3, GR8 STRONGBACK WASHER HEX HD CAPSCREW, 1/2-13x2, GR5 HEX NUT, 1-8 HEAVY HEX JAM NUT, 1-8 BOOM END COVER FLAT WASHER, 3/8 WING BOLT BOOM BASE PIN BUSHING HEX HD CAPSCREW, 5/8-11x6, GR8 HEX LOCKNUT, 5/8-11 CROWD BASE & LIFT ROD PIN HEX HD CAPSCREW, 5/8-11x4, GR8

2 12 12 48 8 1 2

25 26 27

8855-1013 8850-1008 8820-1567

2 2 6

28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

8856-1111 9020-5497 9103-1237 9103-3190 9103-3186 8820-1532 9103-6036 8820-1563 9020-7030 9103-1235 9103-3184 8820-1534 9103-3188 9103-1234 9020-7029 9103-3189 9020-7352 9002-8935

18 12 12 6 4 12 1 12 4 4 2 2 2 2 2 2 1 2

BEARING PAD PUNCHED HOLE SHIM SLOTTED SHIM FLAT WASHER, 3/8 HEX HD CAPSCREW, 3/8-24x7/8, GR5 CROWD CYLINDER HANGER HEX HD CAPSCREW, 1/2-13x1-1/2, GR5 LOCKWASHER, 1/2 HEX NUT, 1/2-13 HEX HD CAPSCREW, 1/2-20x1-3/4, GR5 FLAT WASHER, 1/2 SLOTTED SHIM PUNCHED HOLE SHIM BEARING PAD BEARING PAD HEX HD CAPSCREW, 3/8-24x3/4, GR5 2ND BOOM SECTION HEX HD CAPSCREW, 1/2-20x7/8, GR5 SLOTTED SHIM PUNCHED HOLE SHIM BEARING PAD HEX HD CAPSCREW, 3/8-24x1,GR5 BEARING PAD PUNCHED HOLE SHIM SLOTTED SHIM BEARING PAD CROWD CYLINDER PIN SNAP RING

* Revised illustration and removed item 17.

3-1

WINCH-TRUSS BOOM Starting Serial No. 8344001L Revised 8-25-06

LK

4-3

WINCH-TRUSS BOOM Starting Serial No. 8344001L Revised 8-25-06 Item

LK

Part No.

Qty.

Description Of Part

9020-7878

1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

9020-8147 9020-8171 8820-1035 9020-8154 9020-8150 9020-8174 9020-8168 9020-8185 9020-8142 9020-8186 9020-8156 9020-8183 9020-8189 9020-8170 9020-8188 9020-8180 8820-1037

1 1 6 2 1 1 1 1 1 1 2 2 2 2 2 1 4

18 19 20 21 22 23 * 24 25 26 27 28 29 30

8855-1011 9020-8187 9020-8181 9020-8182 9020-8153 9020-8152 9020-8148 9140-4384 9020-8173 9020-8145 9020-8143 9020-8169 8855-1011 8820-1036

4 AR 1 1 1 6 1 1 2 1 1 1 1 1

31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

9020-8155 8850-1008 9020-8151 9020-8149 9020-8176 9020-8177 9020-8164 9020-8184 9020-8175 9020-8158 9020-8163 9020-8179 9020-8162 9020-8159 9020-8157 8850-1006 9020-8165 9020-8166 9020-8167 9020-8160 9020-8178 9020-8190 9020-8172 9020-8161 8820-1037

4 4 1 1 2 1 2 2 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 8

56 57

8855-1011 9020-8146 8867-1001

4 1

TRUSS BOOM WINCH (includes all items) GEAR CASE COVER GEAR CASE GASKET HEX HD CAPSCREW, 3/8-16x1, GR.5 BUSHING WORM GEAR BUSHING OIL FILL PLUG OIL LEVEL PLUG GEAR CASE OIL DRAIN PLUG COLLAR BEARING OIL SEAL BEARING HUB GASKET BEARING HUB MOTOR MOUNT ADAPTER HEX HD CAPSCREW, 3/8-16x1-1/2 GR.5 LOCK WASHER, 3/8 COUPLER SPACER COUPLER WINCH SHAFT COUPLER MOTOR SHAFT LOCK SEAT BUSHING CABLE DRUM SHAFT KEY CABLE DRUM SHAFT LOCK SEAT WASHER CABLE DRUM LOCK SEAT WIRE ROPE LOCK LOCKWASHER, 3/8 HEX HD CAPSCREW, 3/8-16x1-1/4 GR.5 STUD BOLT, 1/2-13x1-1/2 HEX NUT, 1/2-13 WORM WORM SHAFT WORM SHAFT KEY WORM SHAFT KEY BRAKE LINING LOCK RING (V.C. type) SEAL BRAKE HOUSING ROLLER BRAKE DRUM SPRING SPRING SEAT BRAKE DRUM BRAKE PLATE HEX NUT, 3/8-16 BRAKE PLATE BRAKE PLATE FIXING PLATE ADJUSTING BOLT SPRING BRAKE COVER GASKET O-RING ADJUSTING NUT HEX HD CAPSCREW, 3/8-16x1-1/2 GR.5 LOCKWASHER, 3/8 BRAKE DRUM LUBE FITTING - STRAIGHT 1/8

* Changed part number on item 24.

4-3

ATTACHMENTS 6 Ft. Vertical Mast Original Issue 8-86 Revised 7-06-06

Item

Part No.

Qty.

9045-5035

1

9045-5037

1

9103-3243 9103-3242 9045-3031 9045-3032 9045-6002 8471-7640 9116-3138

1 1 1 1 1 1 1

9140-3414

1

5 6 7

9104-3126 2443-1386 8820-1037

1 2 2

8

8856-1004

2

1 2 3 4

ER 46361, 49939 - LK

Description Of Part 6 FT. MAST ASSY, (48" carriage), (includes all items) 6 FT. MAST ASSY, (66" carriage), (includes all items) 6K CAPACITY CHART, (located in cab) 8K CAPACITY CHART, (located in cab) CARRIAGE WELDMENT - 48" CARRIAGE WELDMENT - 66" ADAPTER WELDMENT HOSE ASSY MALE HYDRAULIC COUPLING, (Before S/N 2005283-01) MALE HYDRAULIC COUPLING, (S/N 2005283-01 & After) DUST CAP CLAMP HEX HD CAPSCREW, 3/8-16X1-1/2, GR5 FLAT WASHER, 3/8

Item

Part No.

Qty.

9

8866-1013

1

8866-2006

1

10 11

8866-1016 8866-1180

1 1

12 13 14 15 16 17 18 19 20 21

8850-1006 8855-1011 9015-3001 8834-1022 9045-1039 9103-4372 9103-4373 9103-4374 9103-4375 9103-4376

2 2 1 4 1 2 2 6 AR 4

22

9103-4377

2

* Revised parts list.

Description Of Part MALE CONNECTOR, 1/2X1/2 TUBE, (Before S/N 2005283-01) CONNECTOR, (includes 8859-1205 o-ring), (S/N 2005283-01 & After) MALE CONNECTOR, 5/8X1/2 TUBE FEMALE ELBOW, 90 DEGREES, 1/2X1/2 TUBE HEX NUT, 3/8-16 LOCKWASHER, 3/8 SERIAL NO. PLATE DRIVE SCREW, #10X3/8 STOP TUBE RETAINING RING CHAIN ROLLER LOAD ROLLER, (inside carriage frame) SHIM SIDE THRUST ROLLER, (small outside roller) SCREW

4-6

PLANETARY HUB Starting Serial No. 8344001L Original Issue 4-87 Revised 5-31-05

Item

Part No.

Qty.

9103-3095 9020-6746 9020-8017 7712-4002 9020-2500 9020-2501 9020-2502 9020-2503 9020-2504 9103-4029 9020-2505 9020-2506 9020-2507 9020-2508 9103-4028 9020-6761 9020-2509 9020-8018

1 1 1 1 1 1 1 1 1 1 1 10 10 1 1 1

17 18 19 * 20

9020-2511 9103-4026 9103-4027 9020-2513 9103-4158 9020-2515 9103-4122

1 6 6 84 3 3 3

21

9020-2517

3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

JD

Description Of Part PLANETARY HUB ASSY, (cast) PLANETARY HUB ASSY, (steel) SPINDLE SEAL CUP BEARING CONE BEARING CUP BEARING CONE BEARING HUB, (steel) HUB, (cast) SPACER RETAINING RING PIPE PLUG WHEEL STUD, (for steel hub) WHEEL STUD, (for cast hub) SEAL BOOT INTERNAL GEAR CARRIER ASSY, (includes items 15 thru 21) CARRIER TAB WASHER BRASS THRUST WASHER NEEDLE BEARING SPACER PINION SHAFT CLUSTER GEAR KIT, (includes items 16, 18 & 21) ROLL PIN

Item

Part No.

Qty.

22 23 24

9020-8020 9020-2519 8822-1119

1 2 2

25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

9020-2521 9020-2522 9020-2523 9020-2524 9020-2525 9020-2526 9020-2527 9020-2528 9020-2531 9020-2532 9020-2533 9020-2534 9020-2536 9020-2537 9020-8021 9020-2542 9020-2543 9020-2544 9020-2545 9020-2546 9020-2547 9020-2548

1 1 4 1 1 1 1 1 2 1 1 1 1 1 1 4 2 8 4 1 1 1

Description Of Part RING GEAR O-RING SOCKET SET SCREW, (cup point), 3/8-16X3/8 COVER COVERCAP CAPSCREW DISCONNECT CAP DISCONNECT ROD O-RING O-RING PIPE PLUG WASHER SPRING RETAINING RING RETAINING RING INPUT SHAFT THRUST SPACER INPUT GEAR THRUST WASHER THRUST BEARING CAPSCREW SHOULDER BOLT COUPLING RETAINING RING RETAINING RING

* Revised art and added inclusion note on item 20.

6-15

BRAKE and INCHING LINKAGE Starting Serial No. 8444491 Thru Serial No. 8744114G Excluding Serial No. 8744079G Perkins Engine Only Original Isuue 2-85 Revised 6-8-06

Item

Part No.

Qty.

1 2

9020-1463 8820-1068

1 1

3 4 5 6 7 8 9

8850-1008 9040-3371 9020-0559 9002-1553 9020-0290 8867-1008 9020-1562 8844-1001

1 1 2 1 6 3 1 2

10 11 12

8850-1408 9020-7835 8820-1066

5 1 4

13 14

9103-3237 9002-1553 8863-1318 9103-1085 8882-1004 9002-1558 9002-7987 9103-3275 9020-7887 9002-7769 NSS

1 1 1 1 2 1 1 1 1 1 36”

15 16 17 18 19 20 21 22 LK

Description Of Part BRAKE PEDAL HEX HD CAPSCREW, 1/2-13X1-3/4 GR5 HEX NUT, 1/2-13 BRAKE LEVER SPRING CLEVIS PIN BEARING LUBE FITTING - STRAIGHT 1/4-28 PIN SQUARE HD SET SCREW (cup point) 1/4-20x1/2 HEX JAM NUT, 1/2-20 SLIP ROD HEX HD CAPSCREW,1/2-13X1-1/4 GR5 SLIP YOKE PIN COTTER PIN, 1/8X1 ROD ADJUSTABLE YOKE END CLEVIS PIN CLEVIS SPRING BRAKE BOOSTER (see page 8-5A) CAP FITTING NYLON TUBE LINE, 3/8

Item

Part No.

Qty.

23 24 25 26

9002-7187 9002-7769 9020-7888 8820-1032

1 1 1 1

27

8856-1109 8820-1008

1 2

28 29

8850-1004 9103-3096 9103-3098

2 1 1

30

9103-1084

1

31

8820-1037

2

32 33 34 35

8856-1004 8850-1006 8850-1406 8319-3008 8319-3009 9103-1232

2 2 2 1 1 1

* 36

9103-3439

1

* Revised part number on item 36.

Description Of Part TRAP FITTING RESERVOIR FILL KIT HEX HD CAPSCREW, 3/8-16X5/8 GR5 FLAT WASHER, 3/8 HEX HD CAPSCREW, 1/4-20X1-3/4 GR5 HEX NUT, 1/4-20 INCHING VALVE TRANS. DISCONNECT SWITCH (used on S/N 8444491 thru 8544670) SWITCH BRACKET (used S/N 8444491 thru 8544670) HEX HD CAPSCREW, 3/8-16X1-1/2 GR5 FLAT WASHER,3/8 HEX NUT, 3/8-16 HEX JAM NUT, 3/8-24 METRIC ELBOW METRIC ADAPTER SWITCH BRACKET (starting S/N 8544671) TRANS. DISCONNECT SWITCH (STARTING S/N 8544671)

8-3

BRAKE PEDAL & INCHING LINKAGE Starting Serial No. 8744115G Also Machine S/N 8744079G Original Isuue 4-87 Revised 6-8-06

Item

Part No.

Qty.

1 2 3

9104-3154 9104-6057 8820-1068

1 1 1

4 5 6 7 8 9 * 10

9020-1463 8850-1008 8863-3002 8820-1003 8855-1009 9103-1232 9103-3439

1 1 1 2 2 1 1

11

8821-1032

2

12 13 14 15 16 17

8856-1105 8855-1007 8850-1612 8668-3480 8348-3114 8825-1023

2 2 2 2 1 1

18 19 20

9104-3086 9104-1196 8855-1010

1 1 1

LK

Description Of Part RETURN SPRING BRAKE LEVER WELDMENT HEX HD CAPSCREW, 1/2-13X1 3/4 GR5 PEDAL WELDMENT HEX NUT, 1/2-13 YOKE PIN, 5/16 HEX HD CAPSCREW, 1/4-20X3/4, GR5 LOCKWASHER, 1/4 SWITCH MOUNTING BRACKET TRANSMISSION DISCONNECT SWITCH SOCKET HD CAPSCREW, #10-24, GR8 FLAT WASHER, #10 LOCKWASHER, #10 HEX NUT, #10-24 CRIMP ON CONNECTOR MALE CONNECTOR SOCKET HD SHOULDER SCREW 3/8X1 1/2, 5/16-18 THREAD BEARING ROLLER LOCKWASHER, 5/16

Item

Part No.

Qty.

21 22 23 24 25 26

8850-1005 8867-1008 9020-0290 9002-8662 9020-1562 8844-1001

1 1 2 2 1 2

27 28 29 30 31 32 33 34

8319-1028 8319-1011 9002-1558 8882-1004 8850-1406 9103-1085 9104-1197

35 36

9002-7987 8821-2228

37

9103-3096 9103-4018

* Revised part number on item 10.

Description Of Part

HEX NUT, 5/16-18 LUBE FITTING, STRAIGHT, 1/4-28 BEARING WASHER PIN SQUARE HD SET SCREW, 1/4-20X1/2 (cup point) 2 HEX HD CAPSCREW, M8X1.25 2 LOCKWASHER, M8 1 CLEVIS PIN & COTTER PIN 2 ADJUSTABLE YOKE END, 3/8-24 6 HEX JAM NUT, 5/16-24 1 ROD 2 SHIM Ref BRAKE VALVE ASSY (see page 10-21 for details) 1 CLEVIS SPRING 2 SOCKET HD CAPSCREW, 5/16-18X1 1/4, GR8 1 INCHING VALVE 1 INCHING VALVE SEAL KIT

8-3

BRAKE PEDAL & INCHING LINKAGE Starting Serial No. 0144337H Original Isuue 4-88 Revised 6-8-06

Item

Part No.

Qty.

1 2 3

9104-3214 9104-6083 8820-1068

1 1 1

4 5 6 7 8 9 * 10

9020-1463 8850-1008 9104-1402 8820-1003 8855-1009 9104-1431 9103-3439

1 1 1 2 2 1 1

11

8821-1032

2

12 13 14 15 16 17

8856-1105 8855-1007 8850-1612 8668-3480 8348-3114 8825-1023

2 2 2 2 1 1

18 19 20 21 22

9104-3086 9104-1196 8855-1010 8850-1005 8867-1008

1 1 1 1 1

LK

Description Of Part RETURN SPRING BRAKE LEVER WELDMENT HEX HD CAPSCREW, 1/2-13X1-3/4 GR5 PEDAL WELDMENT HEX NUT, 1/2-13 SPECIAL CLEVIS PIN HEX HD CAPSCREW, 1/4-20X3/4, GR5 LOCKWASHER, 1/4 SWITCH MOUNTING BRACKET TRANSMISSION DISCONNECT SWITCH SOCKET HD CAPSCREW, #10-24, GR8 FLAT WASHER, #10 LOCKWASHER, #10 HEX NUT, #10-24 CRIMP ON CONNECTOR MALE CONNECTOR SOCKET HD SHOULDER SCREW 3/8X1-1/2, 5/16-18 THREAD BEARING ROLLER LOCKWASHER, 5/16 HEX NUT, 5/16-18 LUBE FITTING, STRAIGHT, 1/4-28

Item

Part No.

Qty.

23 24 25 26

9020-0290 9002-8662 9020-1562 8844-1001

2 2 1 2

27 28 29 30 31 32 33 34

8319-1028 8319-1011 9002-1558 8882-1004 8850-1406 9103-1085 9104-1197

35 36

9104-1425 8821-2228

37

9103-3096 9103-4018 9020-7801 8856-1004 9104-1424 8863-1303

38 39 40 41

* Revised part number on item 10.

Description Of Part

BEARING WASHER PIN SQUARE HD SET SCREW, 1/4-20X1/2 (cup point) 2 HEX HD CAPSCREW, M8X1.25 2 LOCKWASHER, M8 1 CLEVIS PIN & COTTER PIN 2 ADJUSTABLE YOKE END, 3/8-24 6 HEX JAM NUT, 5/16-24 1 ROD 2 SHIM Ref BRAKE VALVE ASSY (see page 10-21 for details) 1 SPECIAL CLEVIS PIN 2 SOCKET HD CAPSCREW, 5/16-18X1-1/4, GR8 1 INCHING VALVE 1 INCHING VALVE SEAL KIT 1 SPRING 1 FLAT WASHER, 3/8 1 SPECIAL YOKE END 1 COTTER PIN, 1/16X1

8-3

BRAKE CYLINDER and BOOSTER Starting Serial No. 8744013G Excluding Serial No. 8744079G Original Issue 11-86 Revised 1-23-04

DS

* Revised inclusion note on Booster Seal Kit.

8-5

BRAKE CYLINDER and BOOSTER Starting Serial No. 8744013G Excluding Serial No. 8744079G Original Issue 11-86 Revised 1-23-04

Item

* 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 DS

Part No.

Qty.

9103-3275

1

9103-4079

AR

9103-4088

AR

9020-8132

AR

9020-8074 9020-8075

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2

9103-4080 9020-8090 9020-8091 9103-4093 9103-4084 9020-8094 9020-8095 9020-8096 9020-8097 9103-4095 9020-8099 9103-4096

Description Of Part BOOSTER & BRAKE MASTER CYLINDER ASSY (includes all items) REPAIR KIT (includes items 16, 17, 18, 20, 22, 23, 26, 45, 58, 59, 60, 62 & 64) MASTER CYLINDER ASSY (includes items 16 thru 27, 41, 44, 45, 47 & 58 thru 64) BOOSTER SEAL KIT (includes items 2, 6, 8, 29, 31, 32, 35, & 38) PUSH ROD BOOT HOUSING PISTON PLUG O-RING PIN PISTON RING PISTON RETAINING RING SPRING RETAINER TUBE SPRING HOUSING RETAINING RING BACK-UP RING O-RING PISTON PISTON FILLER PLUG CUP GASKET CHECK VALVE SPRING SEAT HOUSING PLUG O-RING SPOOL O-RING

Item 32 33 34 35 36 37 38 39 40 41 42 43 44 45 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

Part No.

9020-8114

9103-4081 9020-8120

9103-4086 9103-4087 9103-4085 9103-4094 9020-8119 9103-4092 9103-4082 9103-4090 9103-4091

Qty. 4 1 1 1 AR 1 1 1 1 1 3 3 AR 1 1 1 1 4 4 4 2 2 AR AR 1 1 1 1 1 2 1 1 1 1

* Revised inclusion note on Booster Seal Kit.

Description Of Part CUP PIN BALL PLUG SHIM SPRING O-RING ROD HOUSING RETAINING RING LOCKWASHER CAPSCREW SILICONE GREASE CUP RETAINER SNUBBER RETAINER CAPSCREW LOCKWASHER LOCKWASHER CAPSCREW CAPSCREW SHIM SHIM PISTON PISTON SEAT RETAINER SPRING CUP CONNECTOR O-RING RETAINING RING WASHER NOTE: ONLY ITEMS WITH PART NUMBERS ARE AVAILABLE FOR SERVICE.

8-5

SERVICE BRAKE-SOMA AXLE Starting Serial No. 8344001L Revised 8-21-06

Item

Part No.

Qty.

1 2 3 4 5 6 7

9020-3894 9020-7951 9020-7952 9020-7945 9020-3897 9020-3899 9020-3900 9020-3901 9020-3902 9020-3903

Ref Ref Ref 1 1 2 4 1 2 2

8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

9020-3904 9020-3905 9020-3906 9020-3907 9020-3908 9020-3909 9020-3910 9020-7946 9020-3911 9020-3912 9020-7947 9020-3914 9020-3915 9020-3916 9020-3913 9020-3917 9020-3919 9040-1237 9040-1228 9020-3918 9020-7950 9020-3920

2 32 2 1 2 1 1 1 1 1 2 2 1 1 2 1 1 11 11 3 2 1

*

GV

Description Of Part BRAKE ASSEMBLY (includes all items) REPAIR KIT (wheel cylinder w/o piston) REPAIR KIT (wheel cylinder w/piston) BACKING PLATE SPRING ATTACHMENT PLATE BOLT HM 8X18 WASHER, W-5 CYLINDER ASSEMBLY BOLT HM 8X40 BRAKE SHOE ASSY (includes items 8 & 9) BRAKE SHOE LINING RIVET SPRING SPRING SPRING AUTOMATIC ADJUSTER WASHER SEAL DUST BOOT BOLT SPRING GUIDE SPRING RETAINER BRAKE SPACER DUST COVER PLUG BRAKE DRUM (ID 400 MM minimum) BLEEDER SCREW NUT M 14X1.50 BOLT HM 14X1.50X60/30 BOLT F 90 HM 10X1.50X25 PLUG BANJO FITTING (with bolt) NOTE: QUANTIES SHOWN ARE FOR ONE SIDE ONLY.

* Added note to bottom of parts list.

8-6

HYDRAULICS-REAR DRIVE Starting Serial No. 8344001L Revised 6-9-06

A

B

SEE PAGE 9-2 SEE PAGE 9-2

Item

Part No.

Qty.

1

9020-7295 9104-3113 9020-2343 8820-1036

1 1 5 5

8850-1006 9020-7371 9104-3168 9020-7297 9104-3115 9020-7372 9002-8225 8471-1342 8820-1067

5 1 1 1 1 4 4 8 16

15

9020-7296 9104-3116 9020-7376 9020-7375 8362-1122 8866-2028 8859-1210 9020-6738

1 1 1 1 6 6 6 1

16 17

9020-7373 9020-7290

1 4

2 3

4 5 *6 7 8 9 10 11 12 13 14

LK

Description Of Part TUBE ASSY TUBE ASSY (starting S/N 8644031G) TUBE CLAMP HEX HD CAPSCREW, 3/8-16X1-1/4 GR5 HEX NUT, 3/8-16 TUBE ASSY TUBE ASSY (starting S/N 8744115G) TUBE ASSY TUBE ASSY (starting S/N 8644031G) ADAPTER O-RING FLANGE HALF HEX HD CAPSCREW, 1/2-13X1-1/2 GR5 TUBE ASSY TUBE ASSY (starting S/N 8644031G) TUBE ASSY TUBE ASSY ELBOW - 90 DEGREES (swivel nut) CONNECTOR (includes o-ring) O-RING SERIES PARALLEL VALVE (see page 10-10 for details) TUBE ASSY HIGH PRESSURE HOSE (armored)

Item

Part No.

Qty.

Description Of Part

18 19 20

9020-7377 9020-7370 8866-2069

1 1 1 1 1 1 1 1 1 2

25 26 27 28 29

8859-1209 9020-7567 8866-2010 8859-1209 9020-7298 9104-3114 8866-2064 8859-1204 9020-7667 9020-7665 8866-1009 9002-9930 9020-6739

30

9020-6748

2

31 32 33 34 35 36

9020-2327 9020-3506 9020-6750 8850-1008 8867-1027 8568-1076

3 4 1 4 1 2

TUBE ASSY TUBE ASSY ELBOW - 90 DEGREES (includes o-ring) O-RING ELBOW - 90 DEGREES (swivel) CONNECTOR (includes o-ring) O-RING TUBE ASSY TUBE ASSY (starting S/N 8644031G) ELBOW - 90 DEGREES (includes o-ring) TUBE ASSY TUBE ASSY CONNECTOR ( includes o-ring) ELBOW - 90 DEGREES (swivel) SOLENOID VALVE (see page 10-11 for details) DRIVE MOTOR (see page 10-16 for details) MOTOR MOUNT STUD WASHER HOLLOW STUD HEX NUT, 1/2-13 LUBE FITING - 45 DEGREES 1/4-28 GASKET (drive motor to hub)

21 22 23 24

1 1 2 1 2

* Revised part number & description on item 6.

9-3

LIFT CYLINDER Starting Serial No. 8344001L Original Issue 8-86 Revised 5-31-05

8000# Units

6000# Units Item 1 2 3 4 5 6 7 8 * 9 10 11 12 13 14 15 16 17

JD

Part No.

Qty.

9080-1333 9020-7962 9002-7961 9020-7960 9020-7958 9020-7957 9020-7959 9020-7963 9020-7964 9104-4084 9020-7965 9020-7966 9020-7967 9020-7968 9020-5414 9002-2217 9002-3222 9020-7970 9020-7956

2 1 1 2 2 2 1 1 1 1 1 1 1 1 2 2 1 1 AR

Description Of Part CYLINDER, LIFT -BARREL -NUT -RING, WEAR -O-RING, PISTON -SEAL, PISTON -PISTON -O-RING -RING, BACKUP -SCREW, SET -BEARING, ROD -SEAL, ROD -WIPER -ROD, PISTON -BUSHING -FITTING, GREASE -O-RING, PISTON ROD -PLUG, PIPE KIT, SEAL

Item

Part No.

Qty.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

9080-1180 9020-6978 9002-2232 9002-2260 9002-3157 9002-2240 9040-0393 9002-3349 9002-5349 9020-6042 9040-0074 9002-2250 9002-2280 9020-6979 9020-5414 9002-2217 9002-3128 9020-7953

2 1 1 2 2 2 1 1 1 1 1 1 1 1 4 2 1 AR

* Changed part number on item 9.

Description Of Part CYLINDER, LIFT -BARREL -NUT, 1-1/2" NC, (self locking) -RING, WEAR -O-RING SEAL -SEAL, PISTON -PISTON -O-RING -RING, BACKUP -PLUG, NYLON -BEARING, ROD -SEAL, ROD -WIPER -ROD, PISTON -BUSHING -FITTING, GREASE -O-RING, PISTON KIT, SEAL

10-1

HYDRAULIC COMPONENTS (9103-3286) (IOWA) Lift Cylinder Starting Serial No. 0144293H Original Issue 8-88 Revised 6-27-07

BEFORE SERVICING CYLINDERS, PLEASE NOTE MACHINE S/N SUFFIX. "H" DESIGNATES IOWA CYLINDERS "J" DESIGNATES JARP CYLINDERS "S" DESIGNATES SEITZ CYLINDERS

Item

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 *17

Part No.

Qty.

Description Of Part

9103-3286

2

9103-4140

1

9103-4138 9103-4153

1 1

9103-4139

2 1 1 1

LIFT CYLINDER ASSY, (includes all items) SEAL KIT, (includes items 3, 4, 5, 7, 9, 10, 11, 13, 14 & 15) CASE ASSY, (includes item 8) HEX LOCKNUT, (lubricate and torque to 1200 ft.lbs.)

WEAR RING O-RING PISTON SEAL PISTON O-RING BUSHING O-RING BACK UP RING NYLON PLUG HEAD WEAR RING U-CUP WIPER SHAFT ASSY, (includes item 17) BUSHING

9103-4154

9103-4136

9103-4137 9140-4352

1 1 1 1 1 2 1 1 1 1

NOTE: ONLY ITEMS WITH PART NUMBERS ARE AVAILABLE FOR SERVICE.

JM

* Revised part number on item 17.

10-1

HYDRAULIC COMPONENTS (9103-3287) (IOWA) Tilt Cylinder Starting Serial No. 0144293H Original Issue 8-88 Revised 6-27-07

BEFORE SERVICING CYLINDERS, PLEASE NOTE MACHINE S/N SUFFIX. "H" DESIGNATES IOWA CYLINDERS "J" DESIGNATES JARP CYLINDERS "S" DESIGNATES SEITZ CYLINDERS

Item

1 2 3 4 5 *6 7 8 9 10 11 12 13 14 15 16 17 18

Part No.

Qty.

9103-3287

1

9103-4150

1

9103-4149

2 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1

9103-4155

2

9103-4148 8867-1008 9140-4352 9103-4147

9103-4146

Description Of Part TILT CYLINDER ASSY, (includes all items) SEAL KIT, (includes items 1, 2, 3, 8 thru 13, 15 & 16) WEAR RING PISTON SEAL O-RING CASE ASSY, (includes item 6) LUBE FITTING, STRAIGHT, 1/4-28 BUSHING SHAFT ASSY, (includes item 6) O-RING WIPER U-CUP WEAR RING, (wide) WEAR RING, (narrow) NYLON PLUG HEAD BACK-UP RING O-RING PISTON, (lubricate & torque to 550 ft.lbs.)

SET SCREW NOTE: ONLY PART NUMBERED ITEMS ARE AVAILABLE FOR SERVICE REPLACEMENT.

JM

* Revised part number on item 6.

10-3

HYUDRAULIC COMPONENTS (9103-3288) (IOWA) Compensating Cylinder Starting Serial No. 0144293H Original Issue 8-88 Revised 6-27-07

BEFORE SERVICING CYLINDERS, PLEASE NOTE MACHINE S/N SUFFIX. "H" DESIGNATES IOWA CYLINDERS "J" DESIGNATES JARP CYLINDERS "S" DESIGNATES SEITZ CYLINDERS

Item

1 2 3 4 5 *6 7 8 9 10 11 12 13 14 15 16 17 18

Part No.

Qty.

Description Of Part

9103-3288

1

9103-4150

1

COMPENSATING CYLINDER ASSY, (includes all items) SEAL KIT, (includes items 1, 2, 3, 8 thru 13, 15 & 16) WEAR RING PISTON SEAL O-RING CASE ASSY, (includes item 6) LUBE FITTING, STRAIGHT, 1/4-28 BUSHING SHAFT ASSY, (includes item 6) O-RING WIPER U-CUP WEAR RING, (wide) WEAR RING, (narrow) NYLON PLUG HEAD BACK-UP RING O-RING PISTON, (lubricate and torque to 550 ft.lbs.)

SET SCREW

9103-4149

2 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1

9103-4155

2

9103-4152 8867-1008 9140-4352 9103-4151

9103-4146

NOTE: ONLY PART NUMBERED ITEMS ARE AVAILABLE FOR SERVICE REPLACEMENT.

JM

* Revised part number on item 6.

10-4

HYDRAULIC COMPONENTS (9104-3205) (IOWA) Sway Cylinder Starting Serial No. 0144293H Original Issue 8-88 Revised 6-27-07

BEFORE SERVICING CYLINDERS, PLEASE NOTE MACHINE S/N SUFFIX. "H" DESIGNATES IOWA CYLINDERS "J" DESIGNATES JARP CYLINDERS "S" DESIGNATES SEITZ CYLINDERS

Item

1 2 3 4 5

*6 7 8 9 10 11 12 13 14 15 16 17

Part No.

Qty.

Description Of Part

9104-3205

1

9104-4275

1

9106-4017

2 1 1 1

SWAY CYLINDER ASSY, (includes all items) SEAL KIT, (includes items 1, 2, 3, 8 thru 11, 14, 15 & 16) WEAR RING O-RING PISTON SEAL HEX LOCKNUT, (lubricate and torque to 625 ft.lbs.)

CASE ASSY, (includes item 6) BUSHING SHAFT ASSY, (includes item 6) WIPER U-CAP WEAR RING, (wide) WEAR RING, (narrow) NYLON PLUG HEAD BACK-UP RING O-RING O-RING PISTON

9104-4273 9140-4352 9104-4272

9104-4271

9104-4274

1 2 1 1 1 1 1 1 1 1 1 1 1

NOTE: ONLY PART NUMBERED ITEMS ARE AVAILABLE FOR SERVICE REPLACEMENT.

JM

* Revised part number on item 6.

10-5

FOWARD-REVERSE CONTROL Starting Serial No. 8344001L Revised 7-16-99 Revised 10-17-03

Item

Part No.

Qty.

9020-6737

1

5 6 7

9002-6155 8855-1011 9020-8137 8866-2180 8859-1210 9020-8191 9020-6423 9020-6422 9020-8139

4 4 1 2 2 1 4 2 2

8 9 10

9020-8140 9020-8141 9103-3040

2 1

1 .

2 3

* 4

GP

Description Of Part FOWARD REVERSE CONTROL VALVE, (includes all items) HEX HD CAPSCREW, 3/8-16 x 5 LOCKWASHER, 3/8 OUTLET SECTION HEX HD PLUG, (includes o-ring) O-RING WORK SECTION O-RING O-RING PORT RELIEF CARTRIDGE, (two backup & one o-ring) REMOTE HYDRAULIC ACTUATOR INLET SECTION PLUG, (not shown), (replaces anticavitation check)

* Changed part number on item 4.

10-9

WIRING - FRAME and ENGINE Starting Serial No. 0144367J Original Issue 8-88 Revised 5-31-05

JD

* Added part number & changed description on item 40.

11-3

WIRING - FRAME and ENGINE Starting Serial No. 0144367J Original Issue 8-88 Revised 5-31-05

VIEW A

Item

Part No.

Qty.

Description Of Part

Item

Part No.

Qty.

1 2

9020-0811

1

3 4 5 6 7 8 9 10 11 12 13 14

8871-2231 7722-3003 9020-7717 9020-6739 9020-6739 8871-1383 9020-6124 9103-3139 9103-3234 9020-6739 9020-7719 9103-3097

1 1 1 1 1 1 1 1 1 1 2 1

24 25 26 27 28

15

9020-6739

1

16

9103-3202

1

8348-3114 8348-3113 9103-3202 9103-3079 2492-1393 2492-1394 2492-1395 9020-2886 8666-1084 9020-5688 9103-3283 9040-0654 9103-3323 9020-5205 9040-2427 9020-7497 9020-7630 9103-3042 9020-3359

6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2

17 18

2474-1047 9020-4973 8998-1036 9103-5112 9103-5112 9103-5112 9103-1197 9103-3270

1 1 2 1 1 1 1 1

GROUND CABLE FUEL SHUT OFF SWITCH, (comes with engine) STREET TEE, 1/8 BACK-UP ALARM JUMPER WIRE SERIES SOLENOID VALVE PARALLEL SOLENOID VALVE REDUCING BUSHING, 1/2X3/8 WATER TEMPERATURE SENDER OIL PRESSURE SENDER ALTERNATOR CAVITATION SOLENOID VALVE JUMPER WIRE PILOT PRESSURE FORWARD REVERSE CONTROL VALVE LOW TORQUE INCHING SOLENOID VALVE TRANSMISSION DISCONNECT SWITCH HOURMETER SWITCH NEUTRAL START SWITCH PAN HD SCREW SECOND GEAR SWITCH THIRD GEAR SWITCH FIRST GEAR SWITCH JUMPER WIRE PRIMER PUMP

9103-3086 8584-1094 7710-3006 8869-1345 9103-3202 8668-3480

1 1 2 1 1 9

19 20 21 22 23 JD

29 30 31 32 33 34 35 36 37 38 39 * 40 41 42 43 44 45

Description Of Part 3 WAY CONNECTOR, (male) 3 WAY CONNECTOR, (female) FORWARD SWITCH ENGINE FRAME HARNESS HORN BRACKET NUT JUMPER WIRE HORN RELAY HOUR METER OIL TEMERATURE SENDER FUEL LEVEL SENDER STARTER JUMPER WIRE STARTER SOLENOID JUMPER CABLE JUMPER WIRE GROUND CABLE BATTERY, (12 volt, 590 amps), TOP STUD, BCI GROUP 27 POSITIVE CABLE CLAMP NUT ELBOW, 90 DEGREES REVERSE SWITCH CRIMP ON CONNECTOR

* Added part number & changed description on item 40.

11-3

MISCELLANEOUS Boom Decals Starting Serial No. 8344001L Revised 11-09-05

Item

Part No.

Qty.

1

9103-3003 9103-3002 9100-3006

2 2 2

9104-3132 9100-3031 9100-3025 9104-3137 9100-3020 9104-3136 9100-3027 9104-3138 9100-3016 9104-3134 9100-3018 9104-3135

2 1 1 1 1 1 1 1 2 2 2 2

2

3 4 5 6 7 8

JD

Description Of Part “534B” DECAL, STANDARD (white) “534B” DECAL, OPTIONAL (black) “GRADALL” DECAL, STANDARD (white) “GRADALL” DECAL, OPTIONAL (black) BOOM ANGLE INDICATOR “6” DECAL, STANDARD (white) “6” DECAL, OPTIONAL (black) “4” DECAL, STANDARD (white) “4” DECAL, OPTIONAL (black) “8” DECAL, STANDARD (white) “8” DECAL, OPTIONAL (black) “1” DECAL, STANDARD (white) “1” DECAL, OPTIONAL (black) “2” DECAL, STANDARD (white) “2” DECAL, OPTIONAL (black)

Item

Part No.

Qty.

9

9100-3014 9104-3133 9103-3023 9103-3018 9103-3218 9103-3016 9103-3216 9104-3039

2 2 1 2 2 2 2 2

9104-3038

2

9020-0445 9020-0688 8856-1111 9002-6491

1 1 1 1

10 11

12

* 13 * * *

* Revised illustration and changed item 13.

Description Of Part “0” DECAL, STANDARD (white) “0” DECAL, OPTIONAL (black) WARNING DECAL “6” DECAL, STANDARD (white) “6” DECAL, OPTIONAL (black) “8” DECAL, STANDARD (white) “8” DECAL, OPTIONAL (black) “MATERIALS HANDLER” DECAL, STANDARD (white) “MATERIALS HANDLER” DECAL, OPTIONAL (black) BOOM ANGLE INDICATOR BEARING FLAT WASHER, 1/2 SHOULDER BOLT

12-2

MISCELLANEOUS Boom Decals Starting Serial No. 0144637J Original Issue 6-89 Revised 11-09-05

Item

Part No.

Qty.

1

9103-3003 9103-3002 9100-3006

2 2 2

9104-3132 9100-3031 9100-3025 9104-3137 9100-3020 9104-3136 9100-3027 9104-3138 9100-3016 9104-3134 9100-3018 9104-3135

2 1 1 1 1 1 1 1 2 2 2 2

2

3 4 5 6 7 8

JD

Description Of Part “534B” DECAL, STANDARD (white) “534B” DECAL, OPTIONAL (black) “GRADALL” DECAL, STANDARD (white) “GRADALL” DECAL, OPTIONAL (black) BOOM ANGLE INDICATOR “6” DECAL, STANDARD (white) “6” DECAL, OPTIONAL (black) “4” DECAL, STANDARD (white) “4” DECAL, OPTIONAL (black) “8” DECAL, STANDARD (white) “8” DECAL, OPTIONAL (black) “1” DECAL, STANDARD (white) “1” DECAL, OPTIONAL (black) “2” DECAL, STANDARD (white) “2” DECAL, OPTIONAL (black)

Item

Part No.

Qty.

9

9100-3014 9104-3133 9103-3023 9103-3018 9103-3218 9103-3016 9103-3216 9104-3039

2 2 1 2 2 2 2 2

9104-3038

2

8360-1011 9020-0445 9020-0688 8856-1108 9002-6491

1 1 1 1 1

10 11

12

13

* 14 * * *

Description Of Part “0” DECAL, STANDARD (white) “0” DECAL, OPTIONAL (black) WARNING DECAL “6” DECAL, STANDARD (white) “6” DECAL, OPTIONAL (black) “8” DECAL, STANDARD (white) “8” DECAL, OPTIONAL (black) “MATERIALS HANDLER” DECAL, STANDARD (white) “MATERIALS HANDLER” DECAL, OPTIONAL (black) WARNING DECAL BOOM ANGLE INDICATOR BEARING FLAT WASHER, 1/2 SHOULDER BOLT

* Revised illustration, added items 13 & 14, and fixed part number on item 3.

12-2

Corporate Office JLG Industries, Inc. 1 JLG Drive McConnellsburg PA. 17233-9533 USA Phone: (717) 485-5161 Fax: (717) 485-6417

JLG Worldwide Locations JLG Industries (Australia) P.O. Box 5119 11 Bolwarra Road Port Macquarie N.S.W. 2444 Australia Phone: (61) 2 65 811111 Fax: (61) 2 65 810122

JLG Latino Americana Ltda.

Rua Eng. Carlos Stevenson, 80-Suite 71 13092-310 Campinas-SP Brazil Phone: (55) 19 3295 0407 Fax: (55) 19 3295 1025

JLG Industries (UK) Unit 4& 5 Bentley Avenue M24 2GP Middleton England Phone: (44) 161 654 1000 Fax: (44) 161 654 1003

JLG EQS Z. I. De Beaulieu 47400 Fauillet France Phone: (33) 553 848 584 Fax: (33) 553848588

JLG Deutschland GmbH Max Planckstrasse 21 D-27721 Ritterhude/lhlpohl Bei Bremen Germany Phone: (49) 421 693 500 Fax: (49) 421 693 5035

JLG Equipment Services Ltd. Rm 1107 Landmark North 39 Lung Sum Avenue Sheung Shui N. T. Hong Kong Phone: (852) 2639 5783 Fax: (852) 2639 5797

JLG Industries (Italia) Via Po. 22 20010 Pregnana Milanese - MI Italy Phone: (39) 029 359 5210 Fax: (39) 029 359 5845

JLG Europe B.V. Polaris Avenue 63 2132 JH Hoofddorp The Netherlands Phone: (31) 235 655 665 Fax: (31) 235 572 493

JLG Polska UI. Krolewska 00-060 Warsawa Poland Phone: (48) 914 320 245 Fax: (48) 914 358 200

JLG Industries (Scotland) Wright Business Centre 1 Lonmay Road Queenslie,Glasgow G33 4EL Scotland Phone: (44) 141 781 6700 Fax: (44) 141 773 1907

Plataformas Elevadoras JLG Iberica, S.L. Trapadella, 2 P.I. Castellbisbal Sur 08755Castellbisbal, Barcelona Spain Phone: (34) 937 724 700 Fax: (34) 937 711 762

JLG Industries (Sweden) Enkopingsvagen 150 Box 704 SE - 17527 Jarfalla Sweden Phone: (46) 850 659 500 Fax: (46) 850 659 534