III. COLLECTOR OPERATION
III. COLLECTOR OPERATION 1. BEFORE OPERATION
3. INSPECTION BEFORE OPERATION
CAUTION: • Become familiar with how to operate the lawn mower and understand safety instructions by reading this manual carefully. • Make sure that all safety covers and guards are installed in position. • Before operating the collector, be sure to confirm that collector opens and closes smoothly.
• Before operating, inspect the points that follow.
1
2. ADJUSTING THE GRASS LIMIT SENSOR
(1) Safety switch
1
3
2
a. Be sure to confirm that the engine stops as soon as operator start the mower or dump container. DANGER: Safety switch is for stopping the engine forcibly when container is dumped during blade of mower deck is rotating. Never fail to check whether this function works correctly before every mowing operation.
4
(1) Adjuster bolt (2) Adjustment position label
4. OPERATION OF COLLECTOR WITH ASSIST CYLINDER
(3) Sensor plate (4) Collector frame
SBC402X-RAE4
a. Filler rate of container is changed with adjusting the adjuster bolt(1).
3
b. Check the buzzer of grass limit sensor. Set the starter switch ON position (Don’t start engine) and set the PTO lever ON. Check that the buzzer sounds when pushing the sensor plate(3).
2
CAUTION: After checking the buzzer, be sure to turn starter switch and PTO lever OFF.
1
(1) Lock plate (2) Pin (3) Nut/M8 (4) Lock bracket
4
Open: Push the “UP” portion of the container dump switch. Close: Push the “DOWN” portion of the container dump switch.
85
